Transmission Corporation Of Andhra Pradesh Limited Tender

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Back Filling the foundation and Basement with borrowed gravel as per requirement and specification including cost & conveyance of all materials, labour charges, leads, lifts , watering and consolidating to required density complete as per the directionsof the Engineer in charge for the finished item of the work .( APSS No. 309&310)

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;White washing with Birla/JK White cement of approved quality with two coats to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials, labour charges and incidental charges such as scaffolding , lift etc, complete for finished item of work as directed by the Engineer in charge. - Ground level (upto 3.66m Height)

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Plastering to Uneven surfaces of RR /CR, PCC with CM(1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Plastering with CM (1:5), 12 mm thick to the even wall surfaces with sponze finishing including cost & conveyance of all aterials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. - Without Scaffolding

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Construction of Brick Masonry in CM (1:6) with common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffoldingleads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work .

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supply and fixing of Roofing with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anticapillary grove complete as directed by the Engineer in charge for the finished item of work.

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Laying of Cement Concrete (1:4:8) mix using 40mm size HBG metal Machine crushed for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supply and fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge -(4.0 mm) as per IS: 2721-1979 - PVC Coated - 3"x3" (76mm x 76mm) - 8 Gauge, size width of the chain link 2000mm . To be fixed to the post at the top and bottom of the fence by welding/ fixing 50x6mm MS flat on top and bottom both sides all through its length including cost and conveyace of all materials, labour charges, leads & lifts etc., for finished item of work as approved and directed by the Engineer-in charge at site.(excluding cost of MS Flat & its accessories)

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supply and fixing Concertina coil GI wire (thickness of the spring core 2.5 + and thickness of the tape punched tape 0.5 + weighing 1 Rm is 1.35kg ) keeping on to the Y angle , stretching and fixing to any type of standard , straining bolts , including securing with and provision of galvanised mild steel wire , stapples or steel pins etc as directed (Posts and struts of wood , concrete , steel etc) by the Engineer-In charge for the finished item of work. (Providing and fixing concertina coil fencing with punched tapencertina coil 450 mm dia 6.6 metre openable length ( total length 90, having 52 nos rounds per 6.6 metre length, upto 3 m height of wallth existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with rizontal barbed wire, stud tied with G.I. staples and G.I. clips totain horizontal, including necessary bolts or G.I. barbed wire tied togle iron, all complete as per direction of Engineer-in-charge (cost ofS. angle, C.C. blocks shall be paid separately))

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., complete as per the directions of the Engineer in charge for the finished item of work. (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Supply and fixing in position of MS angles (embedded in CC (1:3:6) compound wall including ) over compound wall including painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work. (Fixing in position MS scrap angles drawn from shapurnagar storesmbedded in CC (1:3:6) - including charges for fabrication,ctification and providing slits charges including painting with twoats of synthetic enamel paint of approved quality, make, colour andade over one coat of red oxide, labour chatges for fixing and headad complete as per the directions of the Engineer in charge for thenished item of work.)

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Laying of Plain Cement concrete (PCC) - Nominal Mix (1:3:6) with 12 to 20mm HBG metal for encasing/embedding the structural steel supportng 'Y' angles with necessary form work including cost and conveyance of all materials,labour charges, curing and water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Earthwork excavation in all types of soils (upto stone matrix) which can be excavated in combination of mechanically and manually with pick axe and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., covering initial lead and lift etc., and backfilling the foundations (after laying foundations) with excavated earth including watering, compacting as per standard specification and disposing of surplus earth within site (up to 1KM lead) complete as per directions of Engineer in charge at site for finished item of work.

Providing of Y angle, barbed wire , Helical fencing for 220/132KV SS Shapurnagar and replacing of ro;Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris away from the site with lead & lift labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.