Transmission Corporation Of Andhra Pradesh Limited Tender

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supply, painting and fixing 3mm thick BP sheet Name boards of following sizes including its cost, cutting, welding, painting with red oxide primer and enamel painting two coats each, lettering as directed by Engineer at site including cost of electrodes, hire charges of welding machine, cutting machine, cost of drilling holes for fixing to structures and labour for painting, fixing complete for finished item of work. c) Name Board size 6" x 18" with supporting structure

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supply, painting and fixing 3mm thick BP sheet Name boards of following sizes including its cost, cutting, welding, painting with red oxide primer and enamel painting two coats each, lettering as directed by Engineer at site including cost of electrodes, hire charges of welding machine, cutting machine, cost of drilling holes for fixing to structures and labour for painting, fixing complete for finished item of work. b) Name Board size 2'0" x 1'6" with supporting structure

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supply, painting and fixing 3mm thick BP sheet Name boards of following sizes including its cost, cutting, welding, painting with red oxide primer and enamel painting two coats each, lettering as directed by Engineer at site including cost of electrodes, hire charges of welding machine, cutting machine, cost of drilling holes for fixing to structures and labour for painting, fixing complete for finished item of work. a) Name Board size 5'0"x3'0" with supporting structure

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Painting to External new walls with 2 coats of acrylic emulsion exterior grade having VOC (Volatile Organic Compound) content less than 50 gms/Ltr of approved brand ( Asian, Berger, Nippon ) and shade over a base coat of appropriate cement primer of exterior grade I quality approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.complete for finished item of work as per the directions of the Engineer in charge as per SS 912 for External walls

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Flush Pointing with CM (1:4) to RR Masonry including cost and conveyance of all materials, all leads and lifts, curing complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Plastering to Uneven surfaces of RR /CR, PCC with CM(1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Plastering with CM (1:5), 12 mm thick with sponze finishing to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., complete as per the directions of the Engineer in charge for the finished item of work. (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Supply and fixing in position of MS angles (embedded in CC (1:3:6) compound wall including ) over compound wall including painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Laying of Plain Cement concrete (PCC) - Nominal Mix (1:3:6) with 12 to 20mm HBG metal for encasing/embedding the structural steel supportng 'Y' angles with necessary form work including cost and conveyance of all materials, labour charges, curing and water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Construction of Brick Masonry in CM (1:6) with common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work .

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Laying of Reinforced Cement Concrete (RCC) M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) (20mm & 12mm (2:1)) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (screened sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge. b) for columns

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Laying of Reinforced Cement Concrete (RCC) M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) (20mm & 12mm (2:1)) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (screened sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge. a) for footings

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500/ 500D/550D) grade as per IS 1786-1979) of TISCO/ SAIL/ VSP/Jindal make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors as per the directions of the Engineer-in-charge. ( APSS No.126)

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Construction of RR Masonry with CM (1:6) using hard CRS , rough granite stone and bond stones (0.16 cum) including cost and conveyance of all matreials., labour charges, water lead , curing, all leads and lifts etc., complete for finished item of work as per directions of the Engineer-in-charge.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Earthwork excavation in all types of soils (upto stone matrix) which can be excavated in combination of mechanically and manually with pick axe and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., covering initial lead and lift etc., and backfilling the foundations (after laying foundations) with excavated earth including watering, compacting as per standard specification and disposing of surplus earth within site (up to 1KM lead) complete as per directions of Engineer in charge at site for finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris away from the site with lead & lift labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Construction of new compound wall in between TSSPDCL, TSTRANSCO and rectification of compound wall;Dismantling of existing stone masonry up to 3 m height, including carefully stacking materials useful for re use and clearing all debris away from the site with initial lead & lift labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.