Transmission Corporation Of Andhra Pradesh Limited Tender

EMWT 03 2024 25;Supply, Transportation and Fixing of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF#0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI#80,.etc complete with 5 years warranty. LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.including supply & fixing of LED patty type batten frame made with CRCA sheet powder coated, fixing an ceiling or wall with all accessories including giving connections, all labour charges and cost of all materials complete as directed by the Engineer in charge for the finished item of work. /

EMWT 03 2024 25;Supply, Transportation and fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.Makes : Atomberg (Efficio ) / Havells / Orient including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

EMWT 03 2024 25;Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 9 W LED lamp (Phillips / OSRAM / Crompton / Eveready / Bajaj / Havells / Pharox / Halonix / Greenlites / IB LED/ Jaquar / C&S / GM / Gold Medal / Million / Syska) (for new installation).

EMWT 03 2024 25;Supply and fixing of 16A /6 A, 1 way 2 Module Combi Socket with indicator lamp /fuse unit of (Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare /Logus Platina.) etc with 16A modular switch control (same make.)on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

EMWT 03 2024 25;Supply and fixing of 6A/10A 3/2 pin modular socket of (Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina) etc with 6A modular switch control of same make on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

EMWT 03 2024 25;Wiring with 2 runs of 22/0.30(1.5 M2m) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) (Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard make) in existing pipe with 6A Modular switch (Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.make, Ceiling rose (Anchor make), Hot dip galvanizes metal (Modular) control box (Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina) and 6 Modular cover frame (Legrand Myrius /Million Tap-Wood / Gold Medal Curve /Anchor Roma viola / GM Four-Five /Salzar / Stanjo Amron / Havells Fabio / C&S /Benlo make) including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.

EMWT 03 2024 25;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of 1000 Ltrs capacity with Double layer approved brand & manufacture (SINTEX or equivalent ISI make) with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials, all fixtures, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

EMWT 03 2024 25;Supply and fixing of 5mm thick plain Glass for windows including cost and conveyance of glass labour charges etc., complete for finished item of work such as fixing luppum patti and other materials required for fixing glass in position and as directed by Engineer In charge at site#

EMWT 03 2024 25;Supply and fixing of Nylon Rollers to the existing aluminium window as per the directions of Engineer in charge for the finished item of work.

EMWT 03 2024 25;Supply and fixing of rubber beading to the existing aluminium window as per the directions of Engineer in charge for the finished item of work.

EMWT 03 2024 25;Providing stainless steel hand railing 304 Grade of Jindal make by running with styles made with 50mm dia of 900mm long at 1m interval, horizontal supports of 3 Nos 19mm dia 304 Grade pipes and hand railing with 50 mm dia 304 Grade pipes, drilling the holes in the concrete in 1 RM cente to center to insert the spikes with plate welded to the stainless steel tubes and grouting including cost of all materials and labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish for finished item of work asper approved drawing and as directed by the Engineer-In - Charge.

EMWT 03 2024 25;Painting with 2 coats of Synthetic enamel paint to wood and iron works of approved quality, shade (Asian, Burger, ICI or equivalent make) and make over a coat of primer (Total 3 coats) at all heights, including cost and conveyance of all materials, all leads and lifts, labour charges complete for finished item of work as directed by Engineer in charge

EMWT 03 2024 25;Supply and fixing of door shutters made of rigid PVC extruded hollow section(nandi or equivalent) of 20mmx200mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4nos with tongue and groove locking arrangements .The shutter frame is made of 30mmx79mm with the wll thickness of 1.5mm+/- 0.15mm section mitre-cut and joined at 4 corners with 125mmx225mm plastic brackets.The shutter shall be horizontally reinforced with 2nos of 8mm PVC rods.Teakwood batons shall be reinforced insidw the door shutter suring the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter complete for finished item of work as per the directions of the Engineer-in-charge. PVC DOOR SHUTTER

EMWT 03 2024 25;White washing with Birla/JK White cement of approved quality with three coats to give even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including cost of all materials, labour charges and incidental charges such as scaffolding , lift etc, complete for finished item of work as directed by the Engineer in charge.

EMWT 03 2024 25;Painting to External new walls with 2 coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand ( Asian, Berger, Nippon ) and shade over a base coat of appropriate cement primer of exterior grade I quality approved brand,making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.complete for finished item of work as directed by the Engineer-in charge as per SS 912 for External walls -First floor

EMWT 03 2024 25;Painting to External new walls with 2 coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand ( Asian, Berger, Nippon ) and shade over a base coat of appropriate cement primer of exterior grade I quality approved brand,making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.complete for finished item of work as per the directions of the Engineer in charge as per SS 912 for External walls

EMWT 03 2024 25;Painting to inner new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand (Asian, Berger, Nippon ) and shade over a base coat of appropriate Cement Primer of Interior grade I of approved brand,making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.complete for finished item of work as per the directions of the Engineer in charge as per SS 911 for internal walls.

EMWT 03 2024 25;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of impervious water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying,rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc complete for finished item of work as per the directions of the Engineer-in-charge.

EMWT 03 2024 25;Plastering to Uneven surfaces of RR /CR, PCC with CM(1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

EMWT 03 2024 25;Plastering with CM (1:5), 12 mm thick to the even wall surfaces with sponze finishing including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. - Without Scaffolding

EMWT 03 2024 25;Construction of Brick Masonry in CM (1:6) with common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . - For Compound Wall

EMWT 03 2024 25;Construction of Brick Masonry in CM (1:6) with common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . - without Scaffolding

EMWT 03 2024 25;Laying of Plain Cement concrete (PCC) - Nominal Mix (1:3:6) with 12 to 20mm HBG metal for encasing/embedding the structural steel supportng 'Y' angles with necessary form work including cost and conveyance of all materials, labour charges, curing and water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

EMWT 03 2024 25;Laying of Cement Concrete (1:4:8) mix using 40mm size HBG metal Machine crushed for foundations including cost and conveyance of all materials at all leads and lifts,ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

EMWT 03 2024 25;Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc.,complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.

EMWT 03 2024 25;Dismantling the existing Unreinforced Cement Concrete upto 15 cm thickness and disposing the unserviceable material away from the site with all leads and lifts including T&P complete as per the directions of the Engineer-in - charge for finished item of work.

EMWT 03 2024 25;Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris away from the site with lead & lift labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

EMWT 03 2024 25;Removing old paintings by steel wire brushing, scraping, sand papering, preparing the wall surface smooth including repairs to scratches, cutting grooves to racks filling with lappam wherever necessary including clearing away the debris from the site for the finished item of work.

EMWT 03 2024 25;Chipping and removing of existing loose particles/ cement mortar flooring/ mortar plastering and removing all the debris away from the site including all, complete as per the directions of the Engineer in charge for the finished item of work.

EMWT 03 2024 25;Repairing, painting to the control house :Earthwork excavation in all types of soils (up to stone matrix) which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry,wet and slushy etc. covering initial lead and lift etc and backfilling the foundations(after laying foundations) with excavated earth including watering, compacting as perstandard specification and disposing of surplus earth within site complete as perdirections of Engineer in charge at site for finished item of work.