Telangana State Tourism Development Corporation Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 10,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
292361Bid Award Id
ViewTender No
5/1/SE/SB/TSTDC/2021-22Tender Authority
Telangana State Tourism Development Corporation ViewPurchaser Address
-Website
http://https://tourism.telangana.gov.in/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Neera;Plain Cement Concrete (1:4:8)(cement: fine aggregate: Coarse aggregate)for foundations and under flooring bedusingcoarse aggregate 40mm size hard , machine crushed granite and using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)
2.13
-
9829
Neera;Supply and placing of the Design Mix Concrete M 25 grade,using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Neera;FOOTINGS
4.03
-
40200
Neera;PEDESTALS
6
-
63177
Neera;Coloumns
1.82
-
23587
Neera;PLINTH BEAMS
1.14
-
15057
Neera;ROOF BEAMS - Unsupported height 3.66m
1.14
-
15543
Neera;Roof Slab 125mm thick
25.73
-
40345
Neera;Supply and placing of RCC M- 20 Nominal mix(Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate)using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., labour charges such as machine mixing, laying concrete, curing, overheads & contractors profit etc., etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.(APSS No. 402)
-
-
-
Neera;Lintels
0.88
-
8671
Neera;Chajjas
3.51
-
3125
Neera;Providing TMT/ HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
1.55
-
131715
Neera;Construction of RR Masonary in Cement Mortor ( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including Seigniorage Charges on all Materials, ,labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work .
6.67
-
29534
Neera;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with 1 kg water proofing compound per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance and including punt charges of all materials ,,like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing providing rounding off the wall and slab junction excluding seignorage charges, VAT etc., complete for finished item of work. (APSS No. 901 & 903) for:-Impervious coat CM(1:3), 20mm
16.73
-
7909
Neera;Brick Masonry for partition walls (225 mm thick)in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509).
21.26
-
138340
Neera;Providing and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
2.52
-
8114
Neera;Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and flyshutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of selfexpanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm
4.32
-
26642
Neera;Plastering 12mm thick in two coatsusing screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit completeforfinished item of workfor internal walls. (SS 901,903 & 904)
92.74
-
38465
Neera;Plastering 20mm thick in two coats for weather exposed exterior wallsusing screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
94.55
-
41778
Neera;Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors. Internal walls
52.67
-
5873
Neera;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
52.67
-
10813
Neera;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
16.73
-
10032
Neera;Providing skirting/ risers of internal walls/ staircases with polished shahabad / Tandur stone slabs of 15mm to 18mm thick inas specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
1.65
-
972
Neera;Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
9
-
10437
Neera;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designswith borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water and overheads & contractors profit complete for finished item of work.
18
-
19452
Neera;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)152.40mm dia up to 914.40mm (3') depth
-
-
-
Neera;101.60mm dia pipe
30
-
16190
Neera;152.40mm dia
20
-
16065
Neera;203.20mm dia
15
-
14418
Neera;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0")in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
1
-
8902
Neera;Supplying and fixing of SWG Gully traps 150mm x 100mmof ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
10
-
7874
Neera;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15.0mm PVC connection with brass union nuts CP coated , 31.75mm dia brass plumber union with check nut, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and overheads & contractors profit etc., complete for finished item of work.
2
-
11109
Neera;Supplying and fixing Indian make Flat Back Wash Hand Basin(HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated ,15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 30.0mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
1
-
2427
Neera;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
1186
Neera;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
4
-
1136
Neera;Supplying and fixing of Double socket PVC/SWR pipes(Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)
-
-
-
Neera;75mm dia
15
-
3428
Neera;90mm dia
20
-
6003
Neera;Supplying & fixing CPVC pipes of SDR 13.5 of standard make and ISI markon ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils (except rock requiring blasting), refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on Teak Wood blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
-
-
-
Neera;15.90mm OD pipe
20
-
3249
Neera;22.20mm OD pipe
25
-
4658
Neera;28.60mm OD pipe
25
-
6164
Neera;Providing and placing on terrace(at all floor levels) polyetheylene water storage tank with double layerapproved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
1000
-
9090
Neera;Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mmwith integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
3238
Neera;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work.
2
-
48
Neera;Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 1.20 x 0.6m for urinalspartitionsincluding full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
4661
Neera;Supplying & Fixing Indian make Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 : 600 x 400 x 250including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
1
-
7935
Neera;Providing, laying and jointing of HDPE pipes 32mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
50
-
6022
Neera;Mechanical Works
-
-
-
Neera;Neera Collection Pots - Large (AS per CPCRI Design).
100
-
150000
Neera;Insulation Boxes, 5 Kgs.
50
-
18000
Neera;Ice Gel Packs- 1 L.
200
-
40000
Neera;Tapping Gadgets.( 2 Nos. Knives/1 No. Tapping stick/
50
-
30000
Neera;Pulley & Rope (suitable upto 40 ft).
50
-
65000
Neera;Freezing Units for Ice Making,300L
50
-
35000
Neera;Freezing Cabinet, 300 (Neera).
2
-
90000
Neera;Insulated Jerry Cans, cap: 20L.
30
-
36000
Neera;Hand Refractometer (Brix Meter). (upto 20 brix).
1
-
6000
Neera;Hand P H Meter. + Thermometer.
1
-
4500
Neera;Measuring Jug 1L & 500 ml (Plastic Food Grade).
50
-
20000
Neera;Working Table (3'x4').
1
-
4500
Neera;Plastic Chairs.
4
-
4000
Neera;Steel Almarah
1
-
6000
Neera;Hand Wash Basin.
1
-
4000
Neera;Electricals..
1
-
27000
Neera;SS Boiling Pan, 150L.(Jaggery making)
1
-
90000
Neera;Neera Collection pots - Large.
50
-
75000
Neera;Neera Collection Pots - Small.
100
-
90000
Neera;Insulation Boxes, 5 Kg.
50
-
18000
Neera;Ice Gel Packs, 1L.
300
-
60000
Neera;Hand Refractometer/Brix Meters '(Upto 20 Brix).
5
-
30000
Neera;Hand PH meters + Thermometers
5
-
22500
Neera;Pulley & Rope Units. '(Upto 40 ft for Palmyrah Palm Trees).
20
-
26000
Neera;Tappers Shoes ( Palmyrah Palm) upto Toe / Industrial Type.
50
-
32500
Neera;Tappers Shoes ( Wild Date Trees) upto Ankle / Gum Boots type.
50
-
32500
Neera;Sarvail Collection centre Civil and Mechanical
-
-
-
Neera;CIVIL WORKS
-
-
-
Neera;Earth work excavation for foundations(Mechanical Means) for buildings in ordinary soilsand depositing on bank for all lifts and with aninitial lead of 10m and up to 3m depthincluding all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work as per SS 20 B(APSS 308)
21.49
-
2448
Neera;Plain Cement Concrete (1:4:8)(cement: fine aggregate: Coarse aggregate)for foundations and under flooring bedusingcoarse aggregate 40mm size hard , machine crushed granite and using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)
2.13
-
9035
Neera;Supply and placing of the Design Mix Concrete M 25 grade,using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Neera;FOOTINGS
4.03
-
38866
Neera;PEDESTALS
6
-
61191
Neera;Coloumns
1.82
-
22019
Neera;PLINTH BEAMS
1.14
-
14679
Neera;ROOF BEAMS - Unsupported height 3.66m
1.14
-
14668
Neera;Roof Slab 125mm thick
25.73
-
40890
Neera;Supply and placing of RCC M- 20 Nominal mix(Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate)using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., labour charges such as machine mixing, laying concrete, curing, overheads & contractors profit etc., etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.(APSS No. 402)
-
-
-
Neera;Lintels
0.88
-
9578
Neera;Chajjas
3.51
-
3071
Neera;Providing TMT/ HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
1.55
-
131715
Neera;Construction of RR Masonary in Cement Mortor ( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including Seigniorage Charges on all Materials, ,labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work .
6.67
-
26996
Neera;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with 1 kg water proofing compound per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance and including punt charges of all materials ,,like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing providing rounding off the wall and slab junction excluding seignorage charges, VAT etc., complete for finished item of work. (APSS No. 901 & 903) for:-Impervious coat CM(1:3), 20mm
16.73
-
7875
Neera;Brick Masonry for partition walls (225 mm thick)in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509).
21.26
-
138134
Neera;Providing and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
2.52
-
8114
Neera;Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. Of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm including overheads and contractor profit complete.
4.32
-
26642
Neera;Plastering 12mm thick in two coatsusing screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit completeforfinished item of workfor internal walls. (SS 901,903 & 904)
92.74
-
37509
Neera;Plastering 20mm thick in two coats for weather exposed exterior wallsusing screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
94.55
-
41587
Neera;Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors. Internal walls
52.67
-
5873
Neera;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
52.67
-
10813
Neera;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
16.73
-
10060
Neera;Providing skirting/ risers of internal walls/ staircases with polished shahabad / Tandur stone slabs of 15mm to 18mm thick inas specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
1.65
-
1192
Neera;Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
9
-
10452
Neera;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designswith borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water and overheads & contractors profit complete for finished item of work.
18
-
19432
Neera;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)152.40mm dia up to 914.40mm (3') depth
-
-
-
Neera;101.60mm dia pipe
30
-
16190
Neera;152.40mm dia
20
-
16065
Neera;203.20mm dia
15
-
14418
Neera;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0")in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
1
-
8902
Neera;Supplying and fixing of SWG Gully traps 150mm x 100mmof ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
10
-
7874
Neera;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15.0mm PVC connection with brass union nuts CP coated , 31.75mm dia brass plumber union with check nut, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and overheads & contractors profit etc., complete for finished item of work.
2
-
11109
Neera;Supplying and fixing Indian make Flat Back Wash Hand Basin(HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated ,15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 30.0mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
1
-
2427
Neera;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
1186
Neera;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
4
-
1136
Neera;Supplying and fixing of Double socket PVC/SWR pipes(Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)
-
-
-
Neera;75mm dia
15
-
3428
Neera;90mm dia
20
-
6003
Neera;Supplying & fixing CPVC pipes of SDR 13.5 of standard make and ISI markon ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils (except rock requiring blasting), refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on Teak Wood blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
-
-
-
Neera;15.90mm OD pipe
20
-
3249
Neera;22.20mm OD pipe
25
-
4658
Neera;28.60mm OD pipe
25
-
6164
Neera;Providing and placing on terrace(at all floor levels) polyetheylene water storage tank with double layerapproved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
1000
-
9090
Neera;Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mmwith integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
3238
Neera;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work.
2
-
48
Neera;Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 1.20 x 0.6m for urinalspartitionsincluding full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
4661
Neera;Supplying & Fixing Indian make Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 : 600 x 400 x 250including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
1
-
7935
Neera;Providing, laying and jointing of HDPE pipes 32mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
50
-
6022
Neera;Mechanical Works
-
-
-
Neera;Neera Collection Pots - Large (AS per CPCRI Design).
100
-
150000
Neera;Insulation Boxes, 5 Kgs.
50
-
18000
Neera;Ice Gel Packs- 1 L.
200
-
40000
Neera;Tapping Gadgets.( 2 Nos. Knives/1 No. Tapping stick/
50
-
30000
Neera;Pulley & Rope (suitable upto 40 ft).
50
-
65000
Neera;Freezing Units for Ice Making,300L
50
-
35000
Neera;Freezing Cabinet, 300 (Neera).
2
-
90000
Neera;Insulated Jerry Cans, cap: 20L.
30
-
36000
Neera;Hand Refractometer (Brix Meter). (upto 20 brix).
1
-
6000
Neera;Hand P H Meter. + Thermometer.
1
-
4500
Neera;Measuring Jug 1L & 500 ml (Plastic Food Grade).
50
-
20000
Neera;Working Table (3'x4').
1
-
4500
Neera;Plastic Chairs.
4
-
4000
Neera;Steel Almarah
1
-
6000
Neera;Hand Wash Basin.
1
-
4000
Neera;Electricals..
1
-
27000
Neera;SS Boiling Pan, 150L.(Jaggery making)
1
-
90000
Neera;Neera Collection pots - Large.
50
-
75000
Neera;Neera Collection Pots - Small.
100
-
90000
Neera;Insulation Boxes, 5 Kg.
50
-
18000
Neera;Ice Gel Packs, 1L.
300
-
60000
Neera;Hand Refractometer/Brix Meters '(Upto 20 Brix).
5
-
30000
Neera;Hand PH meters + Thermometers
5
-
22500
Neera;Pulley & Rope Units. '(Upto 40 ft for Palmyrah Palm Trees).
20
-
26000
Neera;Tappers Shoes ( Palmyrah Palm) upto Toe / Industrial Type.
50
-
32500
Neera;Tappers Shoes ( Wild Date Trees) upto Ankle / Gum Boots type.
50
-
32500
Neera;Munipally Collection centre Civil and Mechanical
-
-
-
Neera;CIVIL WORKS
-
-
-
Neera;Earth work excavation for foundations(Mechanical Means) for buildings in ordinary soilsand depositing on bank for all lifts and with aninitial lead of 10m and up to 3m depthincluding all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work as per SS 20 B(APSS 308)
21.49
-
2448
Neera;Plain Cement Concrete (1:4:8)(cement: fine aggregate: Coarse aggregate)for foundations and under flooring bedusingcoarse aggregate 40mm size hard , machine crushed granite and using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)
2.13
-
10637
Neera;Supply and placing of the Design Mix Concrete M 25 grade,using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Neera;FOOTINGS
4.03
-
41934
Neera;PEDESTALS
6
-
65760
Neera;Coloumns
1.82
-
23304
Neera;PLINTH BEAMS
1.14
-
15547
Neera;ROOF BEAMS - Unsupported height 3.66m
1.14
-
15473
Neera;Roof Slab 125mm thick
25.73
-
41729
Neera;Supply and placing of RCC M- 20 Nominal mix(Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate)using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., labour charges such as machine mixing, laying concrete, curing, overheads & contractors profit etc., etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.(APSS No. 402)
-
-
-
Neera;Lintels
0.88
-
10278
Neera;Chajjas
3.51
-
3210
Neera;Providing TMT/ HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
1.55
-
131715
Neera;Construction of RR Masonary in Cement Mortor ( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including Seigniorage Charges on all Materials, ,labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work .
6.67
-
33004
Neera;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with 1 kg water proofing compound per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance and including punt charges of all materials ,,like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing providing rounding off the wall and slab junction excluding seignorage charges, VAT etc., complete for finished item of work. (APSS No. 901 & 903) for:-Impervious coat CM(1:3), 20mm
16.73
-
8407
Neera;Brick Masonry for partition walls (225 mm thick)in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509).
21.26
-
141353
Neera;Providing and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
2.52
-
8114
Neera;Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. Of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm including overheads and contractor profit complete.
4.32
-
26642
Neera;Plastering 12mm thick in two coatsusing screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit completeforfinished item of workfor internal walls. (SS 901,903 & 904)
92.74
-
40343
Neera;Plastering 20mm thick in two coats for weather exposed exterior wallsusing screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
94.55
-
51056
Neera;Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors. Internal walls
52.67
-
5873
Neera;Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors. Externall walls
52.67
-
10813
Neera;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
16.73
-
10304
Neera;Providing skirting/ risers of internal walls/ staircases with polished shahabad / Tandur stone slabs of 15mm to 18mm thick inas specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
1.65
-
1318
Neera;Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
9
-
10584
Neera;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designswith borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water and overheads & contractors profit complete for finished item of work.
18
-
21065
Neera;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)152.40mm dia up to 914.40mm (3') depth
-
-
-
Neera;101.60mm dia pipe
30
-
16190
Neera;152.40mm dia
20
-
16065
Neera;203.20mm dia
15
-
14418
Neera;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0")in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
1
-
8902
Neera;Supplying and fixing of SWG Gully traps 150mm x 100mmof ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
10
-
7874
Neera;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15.0mm PVC connection with brass union nuts CP coated , 31.75mm dia brass plumber union with check nut, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and overheads & contractors profit etc., complete for finished item of work.
2
-
11109
Neera;Supplying and fixing Indian make Flat Back Wash Hand Basin(HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated ,15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 30.0mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
1
-
2427
Neera;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
1186
Neera;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
4
-
1136
Neera;Supplying and fixing of Double socket PVC/SWR pipes(Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)
-
-
-
Neera;75mm dia
15
-
3428
Neera;90mm dia
20
-
6003
Neera;Supplying & fixing CPVC pipes of SDR 13.5 of standard make and ISI markon ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils (except rock requiring blasting), refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on Teak Wood blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
-
-
-
Neera;15.90mm OD pipe
20
-
3249
Neera;22.20mm OD pipe
25
-
4658
Neera;28.60mm OD pipe
25
-
6164
Neera;Providing and placing on terrace(at all floor levels) polyetheylene water storage tank with double layerapproved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
1000
-
9090
Neera;Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mmwith integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
3238
Neera;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work.
2
-
48
Neera;Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 1.20 x 0.6m for urinalspartitionsincluding full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
2
-
4661
Neera;Supplying & Fixing Indian make Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 : 600 x 400 x 250including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
1
-
7935
Neera;Providing, laying and jointing of HDPE pipes 32mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
50
-
6022
Neera;Mechanical Works
-
-
-
Neera;Neera Collection Pots - Small. '(As per CPCRI Design).
300
-
270000
Neera;Insulation Boxes, 5 Kg.
50
-
18000
Neera;Ice Gel Packs, 1L.
300
-
60000
Neera;Tapping Tools '(2 Nos. knives/ 1 No. Tapping stick/ 1 No. Scissor).
50
-
30000
Neera;Bamboo Ladder ( suitable upto 20 ft)
50
-
30000
Neera;Topper Shoes (Gum boots/upto Ankle).
100
-
65000
Neera;Freezing Units 300L (ice making)
2
-
90000
Neera;Freezing Cabinet, 300L ( Neera).
1
-
45000
Neera;Insulated Cool Jerry Cans,Cap: 18 / 20L.
30
-
36000
Neera;Hand Refractometer '(upto 20 brix).
1
-
6000
Neera;Hand P H Meter. + Thermometer
1
-
4500
Neera;Measuring Jugs (1L & 500 ml) Plastic - Food Grade,
50
-
20000
Neera;Working Table (3'x4').
1
-
4500
Neera;Plastic Chairs.
4
-
4000
Neera;Steel Almarah
1
-
6000
Neera;Hand Wash Basin.
1
-
4000
Neera;Electricals.
1
-
27000
Neera;SS Boiling Pan, 150L. '(Jaggery Making).
1
-
90000
Neera;Neera Collection pots - Large.
50
-
75000
Neera;Neera Collection Pots - Small.
100
-
90000
Neera;Insulation Boxes, 5 Kg.
50
-
18000
Neera;Ice Gel Packs, 1L.
300
-
60000
Neera;Hand Refractometer/Brix Meters '(Upto 20 Brix).
5
-
30000
Neera;Hand PH meters + Thermometers
5
-
22500
Neera;Pulley & Rope Units. '(Upto 40 ft for Palmyrah Palm Trees).
20
-
26000
Neera;Tappers Shoes ( Palmyrah Palm) upto Toe / Industrial Type.
50
-
32500
Neera;Tappers Shoes ( Wild Date Trees) upto Ankle / Gum Boots type.
50
-
32500
Neera;Nandanam Plant and Collection centre Civil & Mechanical
-
-
-
Neera;CIVIL WORKS
-
-
-
Neera;Earth work excavation for foundations(Mechanical Means) for buildings in ordinary soilsand depositing on bank for all lifts and with aninitial lead of 10m and up to 3m depthincluding all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work as per SS 20 B(APSS 308)
739.64
-
87115
Neera;Plain Cement Concrete (1:4:8)(cement: fine aggregate: Coarse aggregate)for foundations and under flooring bedusingcoarse aggregate 40mm size hard , machine crushed granite and using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)
79.91
-
358550
Neera;Filling with available excavated earth in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310)
574.52
-
64869
Neera;Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310)
555.36
-
160227
Neera;Supply and placing of the Design Mix Concrete M 25 grade,using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Neera;FOOTINGS
193.03
-
2014511
Neera;PEDESTALS
15.97
-
177057
Neera;Coloumns
44.81
-
568994
Neera;PLINTH BEAMS
47
-
653232
Neera;ROOF BEAMS - Unsupported height 3.66m
83.22
-
1127514
Neera;Roof Slab 125mm thick
1037.73
-
1673848
Neera;Supply and placing of RCC M- 20 Nominal mix(Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate)using Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., labour charges such as machine mixing, laying concrete, curing, overheads & contractors profit etc., etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.(APSS No. 402)
-
-
-
Neera;Lintels
3.99
-
46779
Neera;Chajjas
3.51
-
-
Neera;Providing TMT/ HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
51.22
-
4484632
Neera;Construction of RR Masonary in Cement Mortor ( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including Seigniorage Charges on all Materials, ,labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work .
162.6
-
732867
Neera;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with 1 kg water proofing compound per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance and including punt charges of all materials ,,like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing providing rounding off the wall and slab junction excluding seignorage charges, VAT etc., complete for finished item of work. (APSS No. 901 & 903) for:-Impervious coat CM(1:3), 20mm
16.73
-
8164
Neera;Masonry for partition walls (225 mm thick)in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 225mm x 100mm x 60mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509).
189.35
-
1351683
Neera;Providing and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
32.52
-
104710
Neera;Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and flyshutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of selfexpanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm
14.82
-
91395
Neera;Plastering 12mm thick in two coatsusing screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit completeforfinished item of workfor internal walls. (SS 901,903 & 904)
2291.8
-
1135197
Neera;Plastering 20mm thick in two coats for weather exposed exterior wallsusing screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
1623.35
-
855749
Neera;Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors. Internal walls
52.67
-
6836
Neera;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
52.67
-
12529
Neera;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
655.86
-
409749
Neera;Providing skirting/ risers of internal walls/ staircases with polished shahabad / Tandur stone slabs of 15mm to 18mm thick inas specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
1.65
-
1190
Neera;Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
292.08
-
339187
Neera;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designswith borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water and overheads & contractors profit complete for finished item of work.
491.01
-
530070
Neera;Flooring with 16 mm to 18 mm thick high polished granite stone slabs of regular colours other than black as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special)
6.3
-
33233
Neera;Flooring with Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement,pigments of size 400 x 400 mm and thickness 25 mm of any shades. as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
108
-
100574
Neera;Providing and fixing of door frames factory made, internal door frames without threshold, fabricated from pre painted cold roll formed section 100 mm x 60 mm made of galvanized (base steel as per IS-513 ?D? quality galvanized as per IS-277 with Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness of 1 mm primer coated with epoxy primer of 5-7 microns thick finish painted with polyester paint of 12- 16 microns and back coated with alkyd backer of 5-7 microns, the frame section filled with polyurethane (PU Foam) of 40 kg/Cum and the sections cut to length and mitre joined by means of 1.25 mm thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25 mm thick electroplated stiffeners of size 150 mm for fixing hold fasts and hinges with MS Powder coated fittings a) 6 Nos M.S. Z Type hold fasts made of 30 mm x 3 mm MS flat of 230 mm long, 3 Nos each size expandable PVC covered screw type fasteners b) 2.5 mm x 300 mm long ?T? hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf/leaf) c) 12 mm Diameter MS tie rod at bottom with necessary size of nuts on either sideincluding cost of conveyance of all materials, labour charges, over heads & contractor's profit etc., complete for finished item of work
20
-
10475
Neera;Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermo setting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic insulation with 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrops ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door
22.68
-
301510
Neera;SUPPLY &FIXING SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. Of 150mm long brackets of 1515mm MS. Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge. Including overheads & Contractor?s profit complete.
20
-
10475
Neera;Providing and fixing Flush door shutters, solid bond wood block board type with commercial ply on both faces : 30 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
25
-
80496
Neera;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work including overheads & Contracot?s profit etc complete.
15
-
2975
Neera;Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58 mm. Primer coat with epoxy primer of 5?7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44 x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro groove should be 25 x 24mm( Aluminium/Plastic)and Lap Strip
5
-
15810
Neera;Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc, finish painted with a polyester paint, section for fly-shutter of 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade and mullions to have double rebate for glazed shutter and flyshutter with a provision for guard bars/grills and 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of selfexpanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work for (i) Single fixed Louvers Ventilator window size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm and (ii) Double fixed Louvers ventilator window Size of 4? 0? x 2? 0? (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm and (iii) Double fixed Louvers Ventilator window size of 4?0? x 3?0? (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm
10.5
-
86322
Neera;Supply and fixing of Aluminium tower bolts ? 300mm longof approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
10
-
1307
Neera;Supply and fixing ofAluminium Aldrop ? 300mm longof approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
6
-
1507
Neera;Supply and fixing of Aluminium fancy Handles ? 150mm longof approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
6
-
627
Neera;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
33.75
-
261437
Neera;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of Work.
11.7
-
85168
Neera;Supplying and fixing of Glass doors with 12mm thick toughened plain glass as per approved drawing supported on top & bottom with pivots, brass cast body Floor Spring IS: 6315 sleek in size with the S.S. / Brass Cover plates of Length 320 mm x Breadth 30 mm size along with the Top Patch, Bottom Patch, Door Lock and Pivot with Double Cylinder etc. complete for Heavy duty Glass doors, polishing all sides of the glass etc complete including cost and conveyance of all materials, labour charges for cutting floor for fixing floor spring, glass polishing , fixing in position, cost of all consumables, overheads & contractors profit etc., complete for finished item of work as per the directions of the engineer-in-charge.
8.25
-
115772
Neera;Supplying and fixing of Fixed Glass partitions with 12mm thick toughened plain glassas per approved drawing with top & bottom supports, polishing all sides of the glass, filling the sides with silicon sealant, including cost and conveyance of all materials, labour charges for cutting, polishing, fixing in position, cost of all consumables, overheads & contractors profit etc., complete for finished item of work as per the directions of the engineer-in-charge.
6.75
-
27587
Neera;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 complete, including overheads and contractors profit complete for finished item of work.
17.28
-
81692
Neera;Providing and fixing MS hand rail with stainless steel top with MS Square hollow sections and stainless steel pipes as per approved drawing and details including all taxes, cost and conveyance of all materials to site, all labor charges for fabricating ,fixing at site, fixing of hold fasts in Concrete, over heads & contractor's profit etc., complete for finished item of work.
14
-
65126
Neera;Data Amendment 2011-12, S.No : 19 Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads and contractor's profit etc. complete for finished item of work- excluding cost of access scaffolding for external walls.
1402.05
-
564451
Neera;Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
2199.06
-
396534
Neera;BLD-CSTN-12-5 Supply & application of one coat of cement primer of exterior grade 2 & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litrefor exterior wallsincluding cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.
1528.8
-
380503
Neera;Providing & fixing Armstrong or approved equivalant suspended false ceiling system with Silhouette profile main runner spaced at 1200mm centres securely fixed to the structural socket by approved hanger at 1200mm maximum centre. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. The 1200mm cross tees to have central ?birdsmouth? notches to facilitate fitting of 600mm cross tees.Perimeter trim to be wall angles or channel, secured to walls at 450 mm maximum centres. b) Providing & Fixing of Armstrong or approved equivalant 15mm thick Mineral Fibre sheet 600x600 of Board/ Tegular Edge tiles with have Humidity Resistance of greater than 80%, Average NRC .50, Light Reflectance >80%, Thermal Conductivity k = 0.052 ? 0.057 w/m?k, Fire Performance Class 0/Class 1 (BS ? 476).
144
-
195744
Neera;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1as per India Gypsum) using 12.5 mm thickGyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels ofsize 20 mm x 27 mm x 30 mm(web) of 0.55mm thick along the perimeter of ceilingscrew fixed to brick work/ partition at 610mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of dry wall top coat complete for finished item of work as per Idia Gypsum Ltd specification.
576
-
646537
Neera;Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litreover a primary coat to newiron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
17.28
-
2974
Neera;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)
-
-
-
Neera;101.60mm dia up to 914.40mm (3') depth
30
-
16190
Neera;152.40mm dia up to 914.40mm (3') depth
30
-
24098
Neera;203.20mm dia up to 914.40mm (3') depth
30
-
28835
Neera;203.20mm dia up to 1524mm (5') depth
30
-
31256
Neera;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0")in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
6
-
53410
Neera;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamberas per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and framesincluding excavating pits up to a depth of 1524 mm (5'-0")in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
5
-
71061
Neera;Supplying and fixing of SWG Gully traps 150mm x 100mmof ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
25
-
19684
Neera;Supplying and fixing of 3" (76.2mm) Nahany trap with jali -UPVC/SWR pipe fittings (Prince/Sudhakar/Kisan/Supreme or any other ISI Brand)as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
20
-
7976
Neera;Supplying and fixing of 4" (101.6mm) multi floor trap with jali -UPVC/SWR pipe fittings (Prince/Sudhakar/Kisan/Supreme or any other ISI Brand)as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
5
-
2255
Neera;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15.0mm PVC connection with brass union nuts CP coated , 31.75mm dia brass plumber union with check nut, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and overheads & contractors profit etc., complete for finished item of work.
6
-
33328
Neera;Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. Including supply and fixing of toilet paper holder contractor?s profit Complete for finished item of work in all respects: White Colour
8
-
108734
Neera;Supplying and fixing Indian make Counter bottom hand wash basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated , 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 30.0mm dia. Brass bottle trap 250mm long with wall connecting pipe including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
2
-
12289
Neera;Supplying and fixing Indian make Flat Back Wash Hand Basin(HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated ,15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 30.0mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
5
-
12134
Neera;Supplying and fixing CP finish brass soap dishheavy type of approved make ISI quality with SS screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
5
-
3278
Neera;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
6
-
3558
Neera;Supplying and fixing of 25mm dia , 609.6mm long aluminium anodized towel rodswith brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
3
-
573
Neera;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
10
-
2840
Neera;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
6
-
4152
Neera;Supplying and fixing of CP finish brass body quarter turn bibcock cum health faucet with 1m long tube and wall hook of 10 years warranty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
4
-
14844
Neera;Supplying and fixing of Chromium plated finish stainless steel body Towel Ring with 10 years warranty conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
4
-
4632
Neera;Supplying and fixing of Double socket PVC/SWR pipes(Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)
-
-
-
Neera;75mm dia
30
-
6857
Neera;90mm dia
35
-
10505
Neera;110mm dia
15
-
5147
Neera;Providing and placing on terrace(at all floor levels) polyetheylene water storage tank with double layerapproved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
6000
-
54540
Neera;Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mmwith integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.
6
-
9714
Neera;Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 1.20 x 0.6m for urinalspartitionsincluding full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
6
-
13984
Neera;Supplying & Fixing Indian make Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 : 600 x 400 x 250including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
3
-
23805
Neera;Providing, laying and jointing of HDPE pipes of 25mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
100
-
8976
Neera;Providing, laying and jointing of HDPE pipes 32mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
150
-
18065
Neera;Mechanical Works
-
-
-
Neera;Neera Collection Pots - Large (AS per CPCRI Design).
100
-
150000
Neera;Insulation Boxes, 5 Kgs.
50
-
18000
Neera;Ice Gel Packs- 1 L.
200
-
40000
Neera;Tapping Gadgets.( 2 Nos. Knives/1 No. Tapping stick/
50
-
30000
Neera;Pulley & Rope (suitable upto 40 ft).
50
-
65000
Neera;Freezing Units for Ice Making,300L
50
-
35000
Neera;Freezing Cabinet, 300 (Neera).
2
-
90000
Neera;Insulated Jerry Cans, cap: 20L.
30
-
36000
Neera;Hand Refractometer (Brix Meter). (upto 20 brix).
1
-
6000
Neera;Hand P H Meter. + Thermometer.
1
-
4500
Neera;Measuring Jug 1L & 500 ml (Plastic Food Grade).
50
-
20000
Neera;Working Table (3'x4').
1
-
4500
Neera;Plastic Chairs.
4
-
4000
Neera;Steel Almarah
1
-
6000
Neera;Hand Wash Basin.
1
-
4000
Neera;Electricals..
1
-
27000
Neera;SS Boiling Pan, 150L.(Jaggery making)
1
-
90000
Neera;Neera Collection pots - Large.
50
-
75000
Neera;Neera Collection Pots - Small.
100
-
90000
Neera;Insulation Boxes, 5 Kg.
50
-
18000
Neera;Ice Gel Packs, 1L.
300
-
60000
Neera;Hand Refractometer/Brix Meters '(Upto 20 Brix).
5
-
30000
Neera;Hand PH meters + Thermometers
5
-
22500
Neera;Pulley & Rope Units. '(Upto 40 ft for Palmyrah Palm Trees).
20
-
26000
Neera;Tappers Shoes ( Palmyrah Palm) upto Toe / Industrial Type.
50
-
32500
Neera;Tappers Shoes ( Wild Date Trees) upto Ankle / Gum Boots type.
50
-
32500
Neera;Mechanical Works for Plant
-
-
-
Neera;Digital Platfrom Weigh Scale, 50 Kgs:The Weigh Scale will be used for weighing of individual Neera Cans/ Insulated Jerry Cans of capacity upto 20L from Neera Collection centres and/or from Bulk Neera Suppliers.The Electronic Weighing Machine will be single load cell based design, platform weighing type and will have SS platter and MS frame work. The Platform size will be minimum 300x450mm. It will have a separate digital display unit with large and bright green vaccum fluorscent numericals and Alphabets. The Weigh Scale will have accuracy of ± 10gms and will confirm to Indian Weights & Measurements Act. The price includes stamping of the Weigh Scale by the local State Govt Authority
1
-
63000
Neera;SS Roller Conveyor, 3M with Tipping Bar:The Roller Conveyor will be gravity sliding type and will be used to manually push the Neera Cans upto the tipping point.The Rollers will be made out of SS Pipes of 50mm diameter with Nylon bearings on eigther sides and fixed in Rectangular pipe sections with SS supporting legs, having SS ball feet for vertical height adjustment. The Tipping Bar will have SS support frame and Nylon block to support the Neera Cans, during manual tipping of Neera. The Tipping Bar would be grouted to the bottom floor with SS Anchor Bolts of suitable size.
1
-
90000
Neera;S.S. Collection Tank 500L:This tank will act as buffer between Neera Collection and Neera processing. The Tank will be rectangular type and fabricated from 2mm thick SS 304 Sheets. The top edges of the tank will be bent down to avoid sharp edge. The Tank will have bottom outlet of 38mm dia with SS Butter fly valve, 4 Nos SS Supporting legs with SS ball feet and top sectional loose covers.
1
-
72000
Neera;S.S. Inline Filter, 38mm Dia:The Unit will be of tubular design with concentric cylindrical filter made from SS Screen of 1.5mm pitch. The Filter will be in SS 304 construction with outer cylindrical casing of 100mm dia, SS perforated filtering element complete with necessary housing fixtures and clamps for easy removal of filtering element. The inlet and outlet connections will be of 38mm dia, ending with SMS Weldable type unions made out of SS 304
1
-
27000
Neera;1.5 SS Centrifugal Pumps, 1000 LPH :These pumps will be used for transfer of Neera to various equipments within the Plant as per process requirement. The Pump will be centrifugal type, sanitary design, with open impeller, and SS housing. The front portion of SS pump to be quick openable type for easy opening and cleaning. The pump will be of monoblock type construction with pump and electrical motor integrated together. The pump will have inlet and outlet conenctions of 38mm dia, ending with SMS weldable type unions. The supply includes SS shroud and bottom frame with SS Ball feet.All the parts coming in contact with liquid will be in SS 304 construction and the electric drive motor will be in painted finish. The Centrifugal pump will be Zeutech / Equivalent Make
3
-
189000
Neera;Neera Clarifier/Candle Filter, 500 LPH:The Clarifier is a centrifuge and used for clarification of Neera to remove all suspended solids and foreign matter. The centrifuge will have central SS discs rotating at high speed which will force out all the solids and foreign matter through the peripheral outlet by centrifugal force. The supply includes infeed bowl in SS/Aluminium and SS outlets for clear Neera and sludge (Impurities). The electrical drive unit and the body will be in painted finish and have provision for grouting to the floor. Supply also includes candle filter with suitable catridges with capacity of minimum 500 LPH of Neera for Pre-filtration prior to feeding to the clarifier.
1
-
459000
Neera;SS Balance Tank, 500L: The Tank will be vertical, cylindrical design and will be used to receive clean Neera and act as buffer for the pasteurisation plant. The Tank bottom and vertical shell will be made out of 2mm thick SS 304 sheets. The Tank will be complete with SS No-Foam inlet, 38mm dia, SS outlet with valve, 38 mm dia, sampling cock, Top sectional loose covers and 4 Nos Supporting legs with SS ball feet.
1
-
72000
Neera;Pasteurisation Plant 500 LPH (Continuous Type / Skid Mounted). The Pasteurisation plant will be High Temperature Short Time (HTST) type and will have plate heat exchanger for heating upto 70 Deg.c. and Tubular Spiraflow Heat Exchanger for further heating upto 90 Deg.c. The Temperature duty of the heat exchangers are as under: Plate Heat Exchanger with Temp. Programme of 6-70-26-4 Deg.c. with Regeneration section for heating of incoming liquid upto 70 Deg.c. and cooling of outgoing liquid upto 26 Deg.c, and Chilling upto 4 Deg.c.. using chilled water @ 1 Deg.c. in the ratio 1:3. Spiraflow Heat Exchanger for heating of Neera upto 85/90 Deg.c by LP Steam and holding tube upto 2 Minutes. The Neera Pasteurisation plant will be assembled on a SS Skid frame on compact layout basis and will comprise of the following accessories: 1 No. SS Feed Pump, Centrifugal type, of capacity 500 LPH, -1 No. SS Diaphragm type valve for manual feed control, -1 Set. SS Heating Device for final stage of heating, by steam/ Steam heating hot water, complete tubular heater, Lp Steam control valve with isolating and by-pass valves.- 1 Set. SS Instruments & Control Panel, equipped with Digital Temperature controller, Digital Temperature Recorder/ Data logger and Digital Temperature scanner of 8 Channels for indication of product and heating and chilling media temperatures. The Control panel will also be provided with ON-OFF push buttons for remote operation of all electric motors within the pasteurisation section.All the product contact surfaces will be made out of SS 304 and electric motors / controls etc., will be in painted finish. The SS skid frame will be provided with SS ball feet for vertical height adjustment upto 50 mm.
1
-
900000
Neera;SS Insulated Tanks. 1000L: These Tanks will be used to store pasteurised and chilled Neera till they are packed and / or subsequently processed into Palm syrup or Palm Jaggery. The Tanks will be of vertical, cylindrical design, double walled, and insulated construction of sanitary design. The inner and outer shells will be made out of minimum 2mm thick SS 304 Sheets and the insulation will be of 100mm expanded polystyrene or equivalent material.The Tanks will be provided with the following fittings /accessories: -SS No-Foam Type inlet with SMS Union, 38mm. -SS Bottom Outlet with Butterfly valve, size: 38 mm.-SS Paddle type agitator, complete with 1 Hp/ 40 RPM drive unit. - SS Top Manway, 450mm dia with cover,- SS Spray Ball / cleaning nozzle for in-place cleaning.- SS Sampling cock. SS Thermowell.- SS Tubular legs with SS Ball feet.-SS Bracket and common. SS ladder for both the tanks.
2
-
540000
Neera;SS. Pipes & Fittings: The SS Pipes and fittings will be of AISI 304 Dairy & Food Industry standard, and designed to interconnect various process and CIP equipments in the Neera processing plant. The SS Pipes will be semi-seamless quality with mirror polish outside and bright annealed inside and manufactured as per ASTM-A270 standard. The SS Pipes used will be of minimum 38mm dia and 1.6mm thick. The supply includes necessary SS bends, tees, SMS type weldable unions, Butterfly valves, Non-Return valves, Reducers, pipe holders and such other specials to complete the piping system.The Support pipes will be Square / Rectangular pipe sections, as per site requirements, and will be made out of minimum 2mm Wall thickness. These pipes will be SSLN quality and will be complete with SS Flange/ dummy plates etc. All the SS Pipe Joints and also weld joints with fittings will be done by TIG with Argon gas flushing inside pipes. All the SS outer weld joints will be ground smooth and polished to 150 grit finish.
1
-
675000
Neera;Steam and Water Mixing Batteries: These Units will be used to generate hot water at required temperature for manual cleaning of process equipments, SS Pipe lines and also washing of floors and walls. The Unit will have a mixing chamber wherein LP Steam will be directly injected into water and gets discharge through bottom outlet. The steam and water connections will be provided with Non-Return valves and stop valves of size 20mm. The bottom discharge will be provided with heavy duty rubber hose pipe of 10M length. The mixing battery will be equipped with SS bracket for hanging the rubber hose pipe and another bracket for wall mounting.
2
-
63000
Neera;PALM JAGGERY SECTION: Vacuum Pan, 500L: The Vaccum Pan will be used for concentration of unfermented Neera and make Palm Syrup with minimum of 65 Deg. Brix (i.e. 5 times conc).The Vaccum pan will be of vertical, cylindrical design, with top and bottom dished ends and in heavy duty SS 304 construction to with stand vacuum inside the vessel and external steam heating. The top and bottom dished ends of the inner vessel will be made out of minimum 5mm thick SS 304 sheets. The cylindrical shell will be made out of minimum 4mm thick SS 304 sheets, The Unit will be provided with Steam jacket, made out of minimum 3mm thick SS 304 sheets. The Jacket will have two segments, wherein the upper jacket will be used in the initial stages and as the volume gets reduced due to evaporation of water, the bottom jacket will be continued till the final concentration is achieved and unloaded from the vessel. The intermediate jacket will be insulated with 50mm thick Mineral wool mats and finally covered with 2mm thick SS 304 outer shell. The Vacuum pan will be complete with the following fittings/accessories: - 1 No. SS No-Foam type inlet, ending in SMS Union, 38mm dia.-1 No. SS Bottom outlet valve, with SS 2-Way plug valve, 38 mm dia. - 1 Set. SS Light Glass / Sight Glass assembly. -1 No. SS Agitator, Slow speed, sweeping type equipped with 2Hp/25RPM Drive Unit.1 No. Vacuum Gauge, 4" Dia Type. - 1 No. SS Top Manway with quick openable cover,- 1 No. SS Cleaning nozzle / Spray Ball. - 1 No. SS Sampling Cock.- 1 No. SS Thermowell with Digital Temp. Indicator.The Scope of supply for Vacuum Pan includes following accessories to complete the System: - 1 No. SS Product Pump, Lobe type, for recirculation of product during concentration process. - 1 No. SS Feed Balance Tank, capacity 100L. - 1 Set. Vaccum Pump, 5 Hp Rating. - 1 No. SS Condenser and vapour ducing for condensing the Vapours from Vaccum Pan. No. SS Spiraflow Tubular heaters, for external heating of liquid. 1 Set. SS Skid frame for mounting of all components on a compact layout basis.-1 Set. Cooling Tower, 50 TR capacity for cooling of condenser water.- 1 Set. Hot Water / Cold Water Supply pumps, 2 Hp Rating. All the parts coming in contact with product will be made out of SS 304 quality. The Vaccum Pan and sub-assembles will be as per sanitary design. All the SS weld joints will be done by TIG with Argon gas flushing and ground smooth and polished to 150 grit finish.
1
-
1485000
Neera;SS Boiling Pan, 150L: The Boiling Pan will be used to make Palm Jaggery using Palm syrup produced from the Vaccum Pan. The Unit will have heavy duty inner shell bottom made out of minimum 5 mm thick SS 304 and will have steam jacket in MS construction. The Bottom will be insulated with 50mm Mineral Wool and finally cladded with 2mm thick SS 304 sheets.The Sides of the Pan will be made from 3mm thick SS 304 Sheets and provided with dimple type steam jacket, insulated and finally covered with 304, 2mm thick sheets of SS 304.The Boiling Pan will have supporting legs and tilting arrangement for unloading the final product. The inner bottom and sides will be provided with specially designed Scraper type agitator for constant stirring/scraping the viscous product.All the SS Weld joints will be done by TIG with Argon gas flushing, ground smooth and polished to 150 grit finish as per sanitary standards. The Drive Unit steam supply and condensate items will be in painted finish.
1
-
387000
Neera;SS Working Tables :The Working tables will be used for setting of Palm Jaggery in moulds and also for packing purposes. The table top will be made out of 2 mm thick SS 304 Sheets and provided with 4 Nos SS Tubular legs with SS Ball feet for vertical height adjustment. The Size of the tables will be 1300mm (L) x 800mm (W) x 850mm (H). The Table will have a SS drain connection of Size 15 NB with a valve for draining of water after cleaning.
3
-
108000
Neera;Vaccum Packing Machine (Single Chamber): The Vaccum Packing machine will be used for packing of Jaggery in unit packages of size. 250/500/1000 gms for retail sales. The Unit will be Table Top model with single chamber suitable for sealing of solid materials.The body will be in SS construction and will accommodate vaccum pump and other operating controls and systems, including heat sealing arrangement for the pouches.The Unit will be INDVAC/Equivalent Make
1
-
270000
Neera;BOTTLING LINE (200/500/1000 ml Sizes): The filling speed of Botting line will be upto 40 BPM on 200ml size /30 BPM on 500 ml and 20 BPM on 1000 ml and will include necessary change over parts etc. The scope of supply includes following At the Start of the Botting line to feed empty bottles to the washing conveyor The Tum Table will be in SS 304 construction and will be of the table. SS Rotary Tum Table 1000 mm dia, complete the SS supporting legs ending with SS ball feet. The rotary turn table will be complete with drive unit of minimum 0.25 Hp for slow speed rotation of the table
1
-
180000
Neera;Two-Head Automatic Liquid Filler: Suitable to handle 100 to 1000 ml size plastic bottles, consisting of the following SS Feed Hopper with Float Valve Pneumatic piston based four nozzle filing system, Diving nozzle with adjustable depth for different containers to avoid spillage and foaming of the product during filling -Height adjustment for different size of containers -Twin bottle stopper system for stopping bottles during filling. -No Bottle No fil provision with stop releasing mechanism Microprocessor based SS control panel with over load relays for motors, MCB's for short circuit protection, fuse connectors, plug in sockets The PLC controlled system will have multi dosing capability. Production counter and complete automation.The machine body will be made out of SS 304 materials and all the product contact surfaces will be in SS 316 construction The sensors mounting assembly will be in SS The product piping will have SS Tri clamps for easy maintenance and quick change over.
1
-
1494000
Neera;Single Head Screw Capping Machine: The Machine will be rotary type cap feeder for auto cap placing onto the bottles, in SS 304 construction, complete with the following: - Single capping head, with chuck system to tighten the caps. - Auto cap feeder Start-Stop system to avoid cap damage, Auto ON-OFF system, wherein the machine stops automatically when there is no Bottle at in feed conveyor.
1
-
594000
Neera;Online Induction Foil sealing Machine: Air cooled model for sealing of foils on the bottle neck, to avoid pilferation of liquids from the bottles.
1
-
414000
Neera;SS Working Table for Shrink Sleeve insertion manually. The Working table will be of size 1300 mm x 800mm and of 750mm (Height) and will be in SS 304 construction. The table will be complete with SS supporting legs with SS ball feet.
1
-
54000
Neera;Semi-Auto Shrink sleeve Tunnel: About 1.2M length with SS slat chain conveyor, with electric heaters on both sides with guards for shrink wrapping of Bottle into cartons for easy handling. The supply includes Temperature Indicator and controller.
1
-
270000
Neera;Online Inkjet Printer. With 5-line printing option to print batch details on the cartons.
1
-
360000
Neera;SS Conveyor for Bottling Line: The Conveyor will be SS slat chain type and of sufficient length from starting of the empty bottles upto the sealed and capped bottles, in a synchronized manner, covering all the operations. The Conveyor will be in SS construction, with adjustable legs, adjustable guide rods to handle different size bottles. The conveyor will be complete with drive unit of 1 Hp rating
1
-
378000
Neera;Carton Shrink Tunnel (Matrix of 6 x 5): In Painted steel construction, suitable for manual bottle loading with tray into the tunnel. The Unit will have twin side electric heaters with guards, Temperature indicator and controller for heat adjustment.
1
-
216000
Neera;SS Roller Conveyor : Gravity roller conveyor suitable to receive shrink wrapped cartons from the Shrink tunnel. The Unit will be minimum 1M long and of enough width to handle cartons with Matrix of 6 x 5 Bottles.
1
-
90000
Neera;Pouch Packing Machine (Single Head): The Unit will be Form, Fill and Seal type, Mechanical operation, suitable to pack 200/500/1000 ml in LDPE Pouches (Similar to Milk / Butter Milk packing). The packing machine will be provided with the following accessories / fittings: - 1 No. SS Overhead balance tank, for gravity feeding of liquids to the filling nozzle. - 1 Set. Film feeding roller with film guard device to stop the machine when film gets exhausted and sterilisation mechanism for feed film.1 Set. Liquid Volume controller/Apportioning device for 200/500/1000ml dispensing.1 Set. Pouch counter, Date printing device for the packed pouches.- 1 Set. Closed circuit in-place-cleaning system for the machine. -1 Set. SS grill type outlet chute and a SS working table to receive packed pouches. (The Pouches are to be loaded into plastic crates manually). -1 Set. PLC based operations and control system with provision to operate / turn down capacity upto 50%. The machine will have operating capacity upto 2500 Packs per hour while operating on 200 ml capacity pouches, with an accuracy upto 5ml. All the parts coming in contact with product will be made out of SS 304. The body, supporting structure and other supporting sub assembles will be made out rust proof SS / Aluminium grade materials.
1
-
684000
Neera;Crown Corking Machine (For Glass Bottles): Suitable for bottle capping and sealing of Crown corks for the glass. bottles. The Machine will have capacity upto 500 Bottles per hour and will be pneumatic operation type. The machine will be supplied in painted finish
1
-
126000
Neera;Autoclave/In-Bottle Steriliser (For Glass Bottles): The Unit will be horizontal, cylindrical shape with front quick openable type door for easy loading / unloading operations. The Autoclave/steriliser will be in heavy duty MS construction, duly insulated with minimum 75mm thick Mineral wool mat insulation and finally cladded with SS sheets.The Autoclave will have SS rack for loading of SS Crates with glass bottles (Filled with Neera) and Steam sparger and distribution system for uniform heating of glass bottles upto 120 Deg.c. The Autoclave will be complete with steam supply with control valve, by-pass/isolating valves and bottom condensate discharge system, pressure gauge, Pressure relief / safety valve and airvent system. The supply includes 4 Nos SS Crate Trolleys (loading will be 2 Crate Trolleys at a time) and 100 Nos SS Crates sufficient for two batches. The Autoclave will have capacity upto 1500 Bottles per batch, handling 50 Nos Crates with a matrix of 6 x 5 i.e. 30 Bottles per Crate.
1
-
1440000
Neera;Cleaning-in-Place (CIP) System-2 Tank Type: The Cip System will be 2-tank type and designed to clean all the process equipments handling neera and allied products within the plant. The scope of supply for the CIP system will comprise the following:a) 1 No. Alkali Tank, 1500L The Tank will be of vertical, cylindrical design with conical bottom, made out of 2mm thick SS 304 sheets. The tank will be duly insulated with 50mm thick mineral wool mats and finally cladded with 2mm thick SS 304 sheets. The Tank will be provided with following fittings / accessories.-1 No SS No-foam type inlet, 51mm dia with SMS Union.1 No. SS Side outlet, 51mm dia with Butterfly valve. 1 No. SS Bottom drain, 51mm dia with Butterfly valve. -1 No. SS Thermosocket -1 No. Sampling cock. -4 Nos. SS Tubular legs ending in SS ball feet. -1 Set. SS Top Sectional covers. All the SS weld Joints will be done by TIG with Argon Gas flushing and the joints will be ground smooth and polished to 150 grit finish as per sanitary standard. b) 1 No. Hot Water Tank, 1500L The Tank will be similar in construction as that of Alkali Tank, mentioned above.c)1 Set. SS Heat Exchanger Unit:The Heat Exchanger will be tubular type with product inside the SS heating tubes and steam in the outer shell. The inner pipes and shell will be in heavy duty SS construction for continuous heating purpose. The capacity of the heat exchanger will be sufficient to heat 5000 LPH cleaning liquids upto 20 Deg.c. for each run.The Supply includes steam control valve (Pneumatically operated) and condensate system, with necessary isolation and by-pass valves. This heat exchanger will be assembled on a SS skid frame, including CIP Supply pump, with interconnecting SS Piping till desired temp. is reached and then forward to the individual equipments required to be cleaned.d) 1 No. CIP Supply Pump, capacity 5 KLPH @ 35 MWC Head: Of Sanitary design, open impeller type, centrifugal pump having a capacity upto 5 KLPH at 35 MWC Head complete with electric motor of minimum 3 Hp rating. The pump will have SS inlet / outlet connections of 38 mm dia and SS shroud covering the electic motor.e) 1 No. CIP Control Panel:in SS Construction, self-standing design, complete with digital display instruments and controls for operation of CIP system. The Panel will also be provided with ON-OFF push buttons, indicating lamps, Timer, and a Digital Temperature Scanner ( 8 Channels) to monitor the CIP operation from a single point.
1
-
1386000
Neera;INSULATED JERRY CANS-15/20L:Suitable for transportation of Neera in Chilled condition from Neera Collection centres to Neera processing Plant. The Jerry Cans will be in Food grade Plastic, and double wall type with insulation so as to retain the cold temperature inside. The Jerry Cans will have a wide throat top lid and suitable handle for easy handling.
100
-
117000
Neera;Flexible Ice Gel Packs (Sizes: 1L): The Icegel EUTECTIC Pads will be used for Neera Chilling During collection from Palmyrah Palm/Wide date trees at Neera Collection centres. These icegel packs are also suitable for product distribution upto Sales Counters so as to maintain the low temperature of Neera and avoid Product spoilage,
500
-
180000
Neera;Freezing/Cooling Cabinets, 300L: The Freezing / Cooling Cabinets will be horizontal, Rectangular type with top sliding door for cooling / freezing of Neera and allied products within Neera Processing Plant. The Freezing cabinets are suitable for freezing upto -15 Deg.c. and will be used for Ice Gel packs. The Cooling Cabinets will be used for cooling & storage of Packed Neera below 10 Deg.c. before despatch to market. The supply will include 4 Nos Freezing cabinets and 6 Nos. Cooling Cabinets, each of capacity 300L- These units will be of VOLTAS/BLUE STAR/ WESTERN or equivalent make.
10
-
450000
Neera;Plastic Crates, 10L:These Plastic crates will be used for handling of Neera pouches and plastic bottles within the Neera Processing Plant. These Crates are rigid plastic and standard type as used in the Dairy Industry for milk distribution.
100
-
216000
Neera;Counter Check Weigh Scales, 2 Kgs (Digital Type): These Weigh Scales will be Table Top modles, suitable for counter checking of Weights of retail pouches / bottles after filling. These Weigh Scales will be digital indicating type and of Essae Teroaka/Avery or equivalent makes, duly stamped by State Govt. Authority.
4
-
72000
Neera;SS Storage Bins/Racks /Working Tables. For use in the production areas of Neera and allied products within the plant. The supply includes the following items:a) 2 Nos SS Storage Bins / Transfer Carts of 200L Volume, made out of 2mm thick SS 304. These will be mobile type mounted on 4 Nos nylon wheels of 100mm size. One fo the wheels, will have break arrangement to lock the cart to the floor at the place of usage.
2
-
72000
Neera;b)- 3 Nos. SS Racks of size 1100 mm (L) x 400 mm (W) x 1500mm (H) made out of SS Sq. pipes of 40x40, with 4 Nos. Shelves, made out of minimum 1.6mm thick SS sheets.
3
-
135000
Neera;C) 2 No - 2 Nos. SS Working Tables of size: 1300x800x750mm for usage in production areas of the Plant. The Table top will be made out of minimum 2mm thick SS 304 sheets and will be provided with 4 Nos. SS supporting legs with ball feet.
2
-
72000
Neera;Raw Water Pump,5 Hp: The Pump is required for supply of Raw Water at sufficient working pressure at designated points to meet the requirement of process plant.The raw water pump should be of capacity 20,000 LPH @ 30 MWC. The Pump will be centrifugal type and of monoblock construction, with Cast Iron Body, dynamically balanced impeller with shaft sleeves, gland etc.,The Pump will be directly coupled to electric motor of minimum 5 Hp rating suitable for running on 400-440V, 50 Hz, 3-phase, AC Supply. The Pump will be complete with inlet / outlet connections and base frame for mounting on bottom foundation frame. All the MS / CI surfaces will be inpainted finish. Make : Kirloskar / Crompton / Equivalent.
1
-
31500
Neera;Raw Water Storage Tanks, 5KL ( PVC): These Tanks will be vertical, cylindrical type and made out of HDPE/PVC suitable for Storage of Water. The Tank will be suitable for direct mounting on RCC foundation and complete with water inlet, outlet and manhole fittings.The Tank will be of Syntex / Equivalent make.
2
-
72000
Neera;Water Softener, 3000 LPH:The Water Softener will be used to treat Raw Water from Borewells, to produce soft water for Boiler feed and also for use as process water in normal applications in the Plant. As a general practice, soft water below 10 ppm hardness will be collected separately and used exclusively for Boiler Feed Water and Soft Water of hardness upto 50 ppm will be used for normal applications in the Plant. The Water Softener will be ION-EXCHANGE, Industrial down water flowtype, with maximum flow rate of 5000 LPH and producing 40 CU.M per Regeneration.The Unit will be complete with the following fittings / accessories: - Pressure Vessel of suitable capacity and suitable for working Pressure of 3.5 Kg/sq.cm.- Frontal piping work with Diaphragam Valves.- Hydraulic Ejector with Regeneration Tank,.- First charge of Strong acid cation resin.The Unit will be packed design and supplied in pre-assembled condition.
1
-
162000
Neera;Soft Water Storage Tanks, 5KL (PVC): These Tanks will be vertical, cylindrical type and made out of HDPE/PVC suitable for Storage of Water. The Tank will be suitable for direct mounting on RCC foundation and complete with water inlet, outlet and manhole fittings.The Tank will be of Syntex / Equivalent make.
2
-
72000
Neera;Soft Water Pump, 3 Hp: The Pump is required for supply of Raw Water at sufficient working pressure at designated points to meet the requirement of process plant. The raw water pump should be of capacity 10,000 LPH @ 30 MWC. The Pump will be centrifugal type and of monoblock construction, with Cast Iron Body, dynamically balance impeller with shaft sleeves, gland etc.,The Pump will be directly coupled to electric motor of minimum 3 Hp rating suitable for running on 400-440V, 50 Hz, 3-phase, AC Supply. The Pump will be complete with inlet / outlet connections and base frame for mounting on bottom foundation frame. All the MS / CI surfaces will be in painted finish. Make : Kirloskar / Crompton / Equivalent.
1
-
27000
Neera;R.O. Plant 2000 LPH. The Raw Water from Borewells or the soft water generated from water softener will be treated to produce RO Water for use Food Processing unit with high degree of hygine. The suggested water treatment process in given below:- Pre Filtration,- Activated Carbon Filtration, Antiscalant Dosing, Reverse Osmosis system, Ultra violet treatment system.Design Basis Raw Water Source Borewell.- Ph Total Dissolved solids.1:75 1900 ppm. Total hardness 900 ppm. 410 ppm. Alkalinity to Methyl Orange 640 ppm. -Chlorides ?Sulphates 36 ppm. 1 ppm. 22 ppm, -Flouride -Silica, (Note: The Water analysis report will be reconfirmed at the time of negotiations/placement of order, based on water analysis report of the Borewell water at Project site).Scope-of-supply Prefilter-one set Comprising of COMPACT new generation manual filter, with maximum flow rate of 5000 LPH The Unit will be complete with FRP pressure vessel, PVC frontal piping, Multiport valve, pressure gauge with first charge of Filter media.Activated Carbon Filter - One set Comprising of New generation activated carbon filter, with maximum flow rate of 4000 LPH. The Unit will be complete with FRP pressure vessel, PVC frontal piping, Multi port valve, pressure gauge, with first charge of filter media Anti-Scale Dosing - One Set The Anti scale dosing system, comprising of 75 Ltrs Chemical solution tank, Dosing pump, electronic metering pump and accessories.
1
-
882000
Neera;SS Tank, 3KL with SS Pump & Piping for RO Water: The SS Tank will be used as buffer between the RO Plant and the consumption within the Plant. The Tank will be vertical, cylindrical design, with conical top and flat sloping bottom. Construction Features: The Tank will be made out of 2mm thick SS sheets. The tank will be complete with the following fittings: -SS Manway, in the top cone. SS Airvent, -SS No-foam type inlet, & SS Bottom outlet with valve.SS Ladder with steps, -SS Bottom legs with adjustable ball feet.All SS Welds will be done by TIG with Argon Gas flushing. All SS inner welds will be ground smooth and polished to 150 grit finish.The RO Water pump will be SS centrifugal pump, with capacity upto 2000 LPH @ 30 MWC head, coupled to minimum 1 Hp rating. The Supply also includes SS Pipes and fittings to interconnect SS Tank, cap: 5KL to the individual equipments requiring RO Water supply.The SS Pipes used will be of AISI 304 quality and flange joints will be provided wherever required as per site conditions.
1
-
585000
Neera;Agro-Waste Boiler. 1000 Kgs/Hr + Chimey + Accessories: The Boiler will be multipass, solid fuel (Coal/Wood/ Bio Mass/ Agrowaste) fired, fully wet back packaged boiler, having water evaporation capacity of minimum 1000 Kgs/Hr of steam, from and at 100 Deg.c. with working pressure of 7 Kgs/sq.cm alongwith standard Boiler mountings and fittings as under: The Supply includes standard Boiler mountings and fittings as under:- 2 Nos. Steam Safety valves,- 1 No. Main Steam Stop valve, -2 Nos. Isolation valves on feed line.1 No CS Blow down valve. - 2 Nos. Fusible plugs. 2 Sets water level gauge with protectors,- 1 No. Airvent valve, -1 No. Pressure gauge with Syphon. The supply includes 2 Nos. Energy efficient SS Vertical Multistage Boiler feed water pumps (One working and second as stand-by) coupled with suitable motor The Boiler will be provided with special heat resistive refractory return chamber, which minimises radiation losses. Further the scope of supply includes the following standard accessories. Water level control system (Mobery control), Ladder, platform and cover for main boiler body. Mineral wool insulation, 75mm thick and GI/Alu. Cladding. specially deisgned Fire Bars for solid fuelds in the firing area. Boiler piping (IBR Quality) for feed water and Blow down lines MS ducting, dust collector cyclone in MS construction, complete with Induced Draft (ID) fan with electric motor of minimum 7.5 Hp Rating. Control panel with contactors, switches, starters, HRC fuses, relays, terminals alongwith ON/OFF push buttons, pilot lamps, etc., for convenient operation. - MS Chimney of suitable dia and height upto 100 ft as per IBR Rules. The Boiler will be made as per latest IBR regulations and the price includes certification / approval by the Director of Boilers, Telangana State,
1
-
1845000
Neera;Feed Water Tank, 2000L: The Tank will be in horizontal, cylindrical shape with conical ends and would be used for storing of Boiler feed water. The Tank will be fabricated from MS sheet of minimum 5mm thick and complete with the following accessories / fittings: -1 No. Top Manway, 450 mm. - 1 Set. Inlet / outlet connection, - 1 No. Airvent,- 1 No. Drain connections with valve, - 1 Set. Float type level indicator with level marking. The Tank will be located at a height of 3M from floor level so as to feed the Boiler water pump by gravity. The Tank will be duly painted with heat resistant premier followed by two coats of heat resistant paint.
1
-
270000
Neera;Steam Piping with Insulation:The Steam piping is required to distribute HP/LP to all the consumption. points of the entire plant as per approved schematic diagram. All necessary supporting structrures required for steam piping are included in scope of work. The Supply includes Pressure Reducing Station to reduce the Hp Steam pressure upto 50 Psig i.e. LP Steam Pressure. The piping will be MS'C' class, and of various sizes suitable for distribution of steam to the consumption points complete with isolating valves/check valves and all fittings as required. All piping will be welded type and flanged joints will be provided wherever necessary for dismantling. the pipelines for maintenance. The steam valves will be Globe type with flanges for sizes 50mm and above. For sizes upto 40mm NB Ball valves screwed type with SS working parts will be used.
1
-
990000
Neera;Chilled Water Plant, 2x5 TR (FREON Operated) The Chilled Water Plant will be Ice-Bank type (IBT) and comprise of 2 Nos Freon condensing units, each of capacity 5 TR, in single stage operation. The supply includes the following sub- assembles: -1 No. MS Insulated chilled water tank of min. size:2500x1250x1500mm (H) Made out of minimum 3mm thick SS sheets for the bottom and 2mm thick SS sheets with IBT stiffeners for the sides. The Tank will be insulated with 100mm thick heavy duty thermocole sheets and finally covered with 1.6mm thick SS sheets.- 1 Lot. The Chiled water tank will be provided with Ice Accumulating coils made out of copper pipes and assembled together and finally connected to freon condensing units to complete the freon circulation system. -1 Set. Chilled Water agitator for circulation of return water and producing ice water for supply to Neera processing plant. -2 Sets. Freon Condensing units, each of 5 TR capacity, EMERSON COPELAND / Equivalent make with Air cooled finned type condenser with dual fans, expansion valve, solenoid and other components / accessories complete. These Freon condensing unit will be mounted on the top of chilled water tank with necessary supporting structure. These condensing units will operated either alone or in combination depending upon the load. The Chilled Water Tank will have outlet of 65mm size fitted with butterfly valve valve and a thermosocket with digital temperature indicator.- 1 Set.-1 No. The supply includes chilled water pump of minimum 3 Hp rating suitable for pumping of chilled water to the Neera processing plant. The Pump will have capacity upto 5000 LPH @ 35 MWC Head.
1
-
1350000
Neera;Chilled Water Piping with Insulation:The Chilled water piping will commence from Chilled Water pump near the Chilled Water tank and extend to all points requiring chilled water connections to process equipment in Neera Processing Plant.The Chilled Water piping will confirm to GI'B' class and include necessary bends, tees, valves, fittings and such other specials required to complete the Chilled Water return system back to chilled water tank. The Chilled Water piping will be provided with 50mm thick expanded polystyrene insulation and cladded outside with SS / Alu. Cladding. The supply also includes MS Structural supports from wall / Roof for all utility piping longwith chilled water piping.
1
-
792000
Neera;Raw & Soft Water Piping : The Water piping is required to distribute water to all the consumptionpoints of the entire plant as per approved schematic diagram. All necessary supporting structures required for raw and soft water piping are included in the scope of work. The piping will confirm to GI'B' class and include various sizes of pipes suitable for distribution of raw and soft water to the consumption points complete with isolating valves / check valves and all fittings as required.The piping will be welded type and flanged joints will be provided wherever necessary for dismantling the pipelines for maintenance. The water line valves will be of Butterfly type with cast iron body, wafer type with EPDM. Nitrile seat for sizes 50mm and above. For sizes upto 40mm NB cast steel body ball valves screwed type with SS working parts will be used.
1
-
391500
Neera;Air Compressor, 5 Hp and Air Piping : The Air Compressor of Non-Lubricated type along with its accessories would be required to generate air for use in the plant for functioning of controls / instruments of the processing / services equipment.The Air compressor will be non-lubricated Reciprocating compressor, with integrated oil sump, air / water cooled, heavy duty, electrically driven, moisture separator with automatic drain valve etc., The Air compressor will have heavy-duty dry type intake air filter with pre-lier separation mechanism. Unloading assembly for full load/no load regulation, pressure and temperature gauges, safety valves, non-return valve, all interconnecting piping with controls & accessories and other standard components.Description of item Free air delivery ( at site condition): 20 Cubic feet per Minute (CFM), working pressure : 7 Kg/cm2 (Max) .The Air compressor will be complete with the following fittings/accessories: - Capacity Regulation system, - Air & Oil Separation system,- Air & Moisture separation system,- Air discharge pressure & temperature gauges.- Drive Motor with starter and pulleys., - Overload protection relay and single phase preventor.- Base frame and Silencer hood. Air Dryer:Suitable non refrigerated air drier twin cylinder type designed to produce .Dry air while measured at 26 Deg.c. ( dew point at NTP). The system will be complete with auto drain moisture separator with minimum pressure drop during operation. The package will be complete with its own control panel etc.Air Receiver:Air Receiver will be farbicated from mild steel confirming to IS 2825 and the material of construction shall conform to the relevant IS code. The receiver will be complete with safety valve, service valves, pressure and temperature gauges, electrical / mechanical type drain to remove moisture and all associated accessories. The air receiver will be tested upto 15 Kgs/ sq.mm pressure.Air Piping:The Air Piping is required to distribute compressed air from the outletof air drier to all the utility points in the process plant.The air pipe lines will conform to GI 'B' Class and will be in weldedconstruction.The scope of supply includes all pipe fitting such as flanges stop valves, check valves, FRL Units etc., and all the necessary supporting structure required for air pipe lines.
1
-
450000
Neera;ELECTRICAL SECTION:The Electrical section will comprise of receiving LT Power supply from TRANSCO/State Electricity Board and required to supply LT Power to various Motor Control Centres (MCC's) / Sub-Distribution boards and thereafter to individual machinery, electric motors, pumps and such other electrical appliances in the Plant. The LT Power supply will be 415 Volts, 3Phase, 50 Hz as per Indian Standards.The scope of supply for the Electrical section will comprise of the following:Main LT Panel + APFC Panel :The Main LT Panel will be of sheet steel construction of minimum 14G thickness. It will be floor mounted design with self structrual structure, front openable, cubical type, made up of vertical panels of uniform height. The Switch Board shall be extensible at both the ends by addition of vertical sections for future expansion. The Panel Board will be totally enclosed, dust, water and vermin roofand shall be in painted finish. The Bus Bars will be Aluminium conductorsof suitable size and will have necessary branch feeders, duly insulated. The Main LT Panel is to be provided with the following feeders and suitable electrical switch Gear components, protective relays contactors,indicating lamps, instruments, Push-Buttons etc., as per approved drawing. A) Incoming Feeders:1. LT Power Supply (from TRANSCO / Electricity Board), 2. DG Set, 75 KVA. B) Outgoing Feeders: 1. MCC ( Neera Processing & Packing), 2. MCC ( Utilities + ETP), 3. MCC ( Lighting) under Civil Work.C) Interlocking: Electrical and Mechanical interlocking will be provided so that Incoming LT Power supply from TRANSCO and DG Set will not "Switch-on" at any given time.Further, care will be taken that all major components of the Panels shall be of same make for better compatibility. APFC Panel: The supply will also include Auto Power - Factor correction panel to maintain power factor always higher than 0.95. The APFC Panel willbe in Sheet Steel painted construction similar to the Main LT Panel. TheUnit will comprise of a Bank of capacitors, with individual capacity ratingsmatching that of Power consumption in the Plant.
1
-
594000
Neera;M.C.C. (Neera Processing & Packing :The Motor control centre (MCC) will be of sheet steel construction of inimum 14G thickness. It will be floor mounted design, with suitable structural frame.The Switch Board will be totally enclosed, dust, water and vermin proof and shall be in painted finish. The front covers will be of removable type and provided with suitable rubber gaskets. The Bus Bars will be of Aluminium conductors of suitable size and will have necessary aluminium branch feeders, duly insulated. The distribution board as well as various incoming and outgoing feeders will be provided with relevant PVC name plates / labels etc., and number ferrules. The Switch Board will be provided with independent incoming box with the following:- Ammeter with Selector Switch,- Voltmeter with Selector Switch,- Pilot Lamps (Red/Yellow/Blue) to indicate the power supply position.Further, the switch board will be constructed as per the following general rules:a) All Feeders upto 7.5 Hp will be D.O.L. Starters only.b) All Feeders above 7.5 Hp and upto and including 30 Hp will be provided with automatic star-delta starter, alongwith thermal overload relays,electronic pneumatic timers, suitable rating HRS fuses for back-up protection, alongwith rotary on-off switch. c) Starters for various outgoing feeders will be provided with remote control wiring wherever necessary. d) The contactors will have operating coils of 230V, 50 Cycles, which should also act no volt coil droping off between 75% to 35% of the rated voltage. The Switch Board and all components used will conform to the latest IS specifications and IE Rules. The Motor control centre (MCC) for Neera Processing and packing will have incoming and outgoing feeders as per Annexure enclosed, and the Switch Board will be supplied accordingly.
1
-
468000
Neera;M.C.C. ( Utilities & ETP) : The MCC for Utilities and Effulent Treatment Plant will have incoming and outgoing feeders as per Annexure enclosed, and the Switch Boardwill be supplied accordingly. The MCC construction and Technical specifications will be same as item No: 6.2 mentioned above.
1
-
369000
Neera;Power & Control Cables: The LT Power Cables will be used for power distribution between the Main LT Panel to MCC's and then to individual Motors and other electrical appliances in the Plant. The Power cables will be suitable for use on 415V system, 1100 vots grade with , Aluminium conductor, PVC insulated, PVC sheathed, armoured and overall sheathed as per IS Standard. The Cable sizing will be as per IE Rules / Industry standard. The minimum size of cable will be 4 sq.mm. The supply includes copper Control cables where applicable to connect control panels, Remote operation, Push Button Stations etc., within the Plant. The Control cables shall be with, copper conductor, PVC sheathed as per IS Standard.Unarmoured cables will be used at appropriate places as per approved drawings. The minimum cable size will be 2.5 sq.mm. The scope of supply also includes single phase control cabling for use alongwith Instruments and controls.
1
-
990000
Neera;Cable Trays / Earthing / Isolators etc., The supply includes earthing systems, cable trays, GI conduits,Juction Boxes, Isolators etc., to complete the electrical wiring as per IE Rules.The earthing system shall include necessary Earth Pits with plate / pipetype earth electrodes, double earthing by GI Strips / wires as per approved electrical scheme.The Cable trays will be used for drawing Power and Control cables for long distances in common areas. The individual motors will be provided with GI conduits upto 2M distance from the Motor.Near the individual motor or electrical appliance, an Isoltator / Junction Boxwill be provided to detach the connection to attend any repair and maintenance work. These Isolators/Jn. Boxes will be totally enclosedwater proof IP-55 design and as used in Dairy & Food processingIndustries.
1
-
432000
Neera;Diesel Generating Set, 75 KVA :The Diesel generating set would be used to generate three phase AC electricity at 415 Volts and 50 Hz. The generating set would be used in the Plant to operate certain essentialmotors in case there is electric failure from the main source. Diesel Engine:The Diesel generating set will comprise of diesel engine, alternator, control panel and accessories complete. The Diesel engine of the DG set will be water-cooled and capable of developing required BHP when running at 1500 rpm under NTP conditions. The engine will be built to BSS specification 649 (1958) and rated for continuous running for 24 hours with an overload capacity of 10% for a period not exceeding 1 hour in any 12 hours running. The diesel engine will be complete with the following * Flywheel,* Flexible coupling, * Air intake, Fuel and lubricating oil filters, * Standard fuel tank,* Lubricating oil pressure gauge,* Lubricating oil cooler* Oil bath air cleaner.* Standard set of tools * Exhaust silencer (max. length: 5M). * Engine water cooling system with cooling fan and radiator,.* Holding down bolts and MS combination base plate. Alternator: The engine will be flexible coupled to suitable self excited alternator developing required KVA at 0.8 Power factor, 3-hase,50 Cycles/sec, 415 Volts AC power supply under NTP conditions whenrunning at 1500 RPM. The alternator will be screen protected and fitted with end shield and ball roller bearings. Control Panel:The Diesel generating set will be supplied with suitable floor / wall mounting type control panel duly pre-wired with the following instruments:* One Power factor meter,Description of item* One set indicating lamps and control fuses. * One-hour meter (time totaliser), * One suitable scaled AC ammeter with selector switch. * One suitable selaed AC Voltmeter with selector switch,* One set of epoxy resin castled CTs of suitable ratings* One suitable scaled Kwhr meter with accessories.* One set of TPN Bus bar insulated with heat shrinkable PVC sleeves (maximum permissible current density shall be 0.8 amps/mm2). * One moulded case circuit breaker to disconnect power supply in case load of generating set increases beyond permitted limits. The rupturing capacity of the MCB should not be less than 35 KA. The Control panel will be fabricated out of 14 SWG CRCA MS Sheet andmust conform to the Indian Electricity Rules. Base Frame:The Diesel engine and alternator will be mounted on specially designed combination base plate and MS Structrure of extremely rigid fabrication.The base plate will be suitable for mounting the set on AVM pads over the foundation. Battery:12V Self-starting arrangement with suitable rated Lead Acid Accumulatortype battery with suitable battery charging arrangement and cables will also be provided.Accoustic Enclosure:The Total DG Set will be provided with suitable Accoustic Enclosure to restrict the noise levels within the limits of the Local Pollution Control Board (PCB). The accoustic enclosure will be made from Cold Rolled commercial quality carbon steel and supplied in painted finish to withstand the outdoor conditions. The Unit will be complete with Door and other fittings standard to outdoor installation of DG Set.Note:The List of items does not include HT Supply from TRANSCO. In this connection, Concerned Divisional Engineerof TRANSCO to be approached to make estimate of HT Line from nearest feeder supply upto Project site. The HT Sub-Station, out door transformer, HT panel etc., and main power cable upto main LT Panel is to be executed byapproved CLASS-1 Electrical Contractor. This estimate is to be obtained and included in PROJECT COST.
1
-
747000
Neera;Mechanical Installation : The Scope of work includes unloading of equipments at Project site, decrating and installation at the designated location as per approved machinery layout, including placing on foundations wherever applicable, Levelling and alignment of machinery, so as to provide product and utilitypiping connections. All the SS Pipe joints at site will be done by TIG with Argon gas flushingand the weld joints will be ground smooth and polished to 150 grit finish. Argon purging will be done inside SS Pipe joints, to avoid eldjoint penetration inside. All the Utilities MS /GI pipe weld joints will bedone by manual Arc welding and will be duly painted with respective ISI codes. The scope of work includes necessary wall / roof/floor supports for product and utility piping. Hot insulation for steam piping and cold insulation for chilled water piping will also be done afterthe pipelines are duly tested and before actual use.
1
-
1620000
Neera;Electrical Installation : The Scope of work includes unloading of electrical items and DG Set at Project site, decrating and installation at actual locations as per approved machinery layout, including placing on foundations, levelling and alignment, providing power and control cables, installation of cable tray/ conduits, earthing, isolators, junction boxes as per IE Rules.
1
-
540000
Neera;TESTING , COMMISSIONING AND TRAIL RUNS(7 Days)The scope of work includes first charge of lubricants, refrigeration freon gas, testing on no-load and later on water under simulated conditions. Then Plant will be started on product in a planned & co-ordinated manner with Project Authority. Log sheets will be maintained on each of the trial runs for 7 days and observations recorded for necessary action prior to the next trial run. After all the parameters are set satisfactory and the product quality is upto market standards, the plant will be handed over to Project Authority for commercial operations.
1
-
270000
Neera;Electrical works
-
-
-
Neera;Supply and Fixing of 25mm dia PVC pipe of heavy grade, FRLS (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes:Sudhakar/Polycab/Finolex.
300
-
21660
Neera;Supply and Fixing of 25mm dia P.V.C. pipe pipe of medium grade, FRLS (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Makes:Sudhakar/Polycab/Finolex.
125
-
9643
Neera;Supply and Fixing of 25mm dia P.V.C. pipe pipe of medium grade (ISI MARK) with all accessories fixing on chromium plated metallic base saddles/PVC Saddles for Light, Fan and separate plug point including all labour charges etc., complete. Makes:Sudhakar/Polycab/Finolex.
450
-
30942
Neera;Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm size with all accessories, duly sealed at points and erected on Wall including cost of all materials and labour charges complete. Makes: Modi .
50
-
2683
Neera;Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) FRLS/HFFR P.V.C. insulated flexible copper cable (ISI MARK) of makes Finolex/RR Kabel/Havells/Polycab in existing pipe with 10A switch, Ceiling rose and modular frame covering to switch control box including all labour charges etc., complete for light points in Buildings. Makes: Legrand Arteor/Honeywell Blenge Plus/Crabtree Amare.
225
-
157575
Neera;Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) FRLSH/HFFR P.V.C. insulated flexible copper cable with one run of 36/0.3mm (2.5 Sqmm) for earth continuity in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex/RR Kabel/Havells/Polycab.
1050
-
124240
Neera;Supply and run of 2 of 56/0.3mm (4 Sq.mm) FRLSH/HFFR P.V.C. insulated flexible copper cable with one run of 56/0.3mm (4 Sqmm) for earth continuity in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex/RR Kabel/Havells/Polycab
450
-
78916
Neera;Supply and run of 2 of 84/0.3mm (6 Sq.mm) FRLSH/HFFR P.V.C. insulated flexible copper cable with one run of 84/0.3mm (6 Sqmm) for earth continuity in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex/RR Kabel/Havells/Polycab
75
-
18697
Neera;Supply and run of 4 of 84/0.3mm (6 Sq.mm) FRLSH/HFFR P.V.C. insulated flexible copper cable with one run of 84/0.3mm (6 Sqmm) for earth continuity in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex/RR Kabel/Havells/Polycab
750
-
307050
Neera;Supply and run of 4 of 140/0.3mm (10 Sq.mm) FRLSH/HFFR P.V.C. insulated flexible copper cable with one run of 140/0.3mm (10 Sqmm) for earth continuity in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex/RR Kabel/Havells/Polycab
35
-
21103
Neera;Supply and fixing of 10A 3/2pin 2 module socket with 10A switch control on a seperate switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes:Legrand Arteor/Honeywell Blenge/Crabtree Amare
49
-
24698
Neera;Supply and fixing of 20A 3 pin 2 module socket with 20A switch control on a seperate switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes:Legrand Arteor/MK Blenge/Crabtree Amare
33
-
21813
Neera;Supply and fixing Distribution board with 20A single phase plug and Socket, in sheet steel enclosure with 16/20A SP MCB including internal connection and labour charges for flush mounting etc., complete. Makes: Legrand-DX3/Schneider-Acti9/Siemens.
10
-
25395
Neera;Supply and fixing SPN Distribution board 12 Way with IP-43 protection suitable for single phase 63 A Four Pole (FP) Isolator as incomer and 8 Nos 6-32 A,10kA SP MCBs as out going including internal connections and labour charges for flush mounting etc., complete. Makes: Legrand/Schneider/Siemens.
7
-
48171
Neera;Supply and fixing TPN Distribution board 4 Way with IP-43 protection suitable for single phase 100 A Four Pole (FP) Isolator as incomer and 12 Nos 6-32 A,10kA SP MCBs as out going including internal connections and labour charges for flush mounting etc., complete. Makes: Legrand/Schneider/Siemens.
7
-
67956
Neera;Supply and fixing VTPN type Distribution board 4 Way with IP-43 protection suitable for single phase 100 A Four Pole (FP) Isolator as incomer and 4 Nos 6-32 A,10kA TP MCBs as out going including internal connections and labour charges for flush mounting etc., complete. Makes: Legrand/Schneider/Siemens.
2
-
33186
Neera;Supply and erecting of Modular Electronic Regulator of for ceiling fan sweep complete erected on existing board including labour charges for fixing etc complete. Makes:Legrand Arteor/Honewell Blenge Plus/Cabtree Amare.
14
-
7931
Neera;Supply and fixing of energy efficient decorative fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMM/W) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., complete of Makes: Atomberg (Efficio + ) / Havells / Orient and labour charges for fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.
14
-
44151
Neera;Supply and fixing of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc and labour charges for fixing of Exhaust fan in wall with necessary connections etc., completeof makes Crompton / Havells Ventil Air-DB / Orient hill air.
12
-
19107
Neera;Supply and fixing of 11W LED mirror light with all standard accessories diffuser etc and including labour charges for fixing etc., complete. Makes: Philips/Crompton/GE.
12
-
7073
Neera;Supply, transportation and fixing of 18W back lit LED Down Light Recessed / Surface mounting round /square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. Data (7.8.1)
44
-
90053
Neera;Supply, transportation and fixing of 22W, 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 50,000 burning hours with BIS Certification with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.
28
-
23671
Neera;Supply and Laying of under ground XLPE Armoured cable of the following sizes. Makes: Polycab /Havells / Finolex.
-
-
-
Neera;150 Sqmm 3.5 Core Alluminium Cable
25
-
25150
Neera;95 Sqmm 3.5 Core Alluminium Cable
30
-
21660
Neera;35 Sqmm 3.5 Core Alluminium Cable
175
-
57050
Neera;16 Sqmm 4 Core Alluminium Cable
325
-
69550
Neera;Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles,clamps,wooden separators etc., with No.10 SWG G.I wire for eath connections for the cables.
500
-
25670
Neera;Supply and transportation of 60/65W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 4KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with 5 years warranty. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.
14
-
88113
Neera;Supply, transportation and fixing of 80W high bay industrial light of efficacy of 110 lm/w with IP 66 protection including labour charges for fixing etc complete finished item of work. Make: Crompton/Philips.
18
-
236160
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements