Telangana State Tourism Development Corporation Tender

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supply and Transportation and Erection of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper : flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years 2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi or equivalent R-32 / R-410 Makes : Daikin / Toshibha / Carrier / Blue Star /Hitachi or equivalent as per the Direction of Departmental Engineer

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Electrical works

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Engaging Labours for disposal of waste dismalted material to ground and other miscanellous works with including of conveyance of all materials for the finished item of work.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supplying and Fixing of Slicon Cealent for the water leakage to the galvalume sheet including of the silicon cealent of epoxy with cost and conveyance of all materials and labour charges for the finished item of work.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand ) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-15 MACHINE MIX.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Plastering 12mm thick in two coats using screened sand (with 50% river sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:8) prop (Cement:sand) using Bricks second class of size (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing , overheads & contractors profit but excluding seignorage charges, GST etc.,complete for finished item of work as per SS 504.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supplying and fixing 14 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity ? = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Dismantling of slabs flooring on sand bed, Including cost and conveyance of all materials to site and all incidental and operational, labour charges, overheads and contractor profit etc., complete for finished item of work.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supply and fixing of powder coated alluminum fixed glazed partition withr using allround frame , by using Alluminum , using suitable glazing clips 19x17.3x0.9 (19630) 1.092kg/mt ,MDF Board: exterior-Both Side Laminated -12 mm thick SOR:285, alluminimum brackets, and 5" Hinges, Galvonized 8mm rod with nuts including cost and conveyance of all materials, labor charges for making and fixing etc., complete for finished item of work

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supply and fixing of powder coated alluminium door by using outer frame section (Chowcoat section 67.5x35x2.00mm)(19557) @1.24kg/mt Door verticles 85.00mmx44.45x2.00mm (19560)@1.417kg/m Bottom 95.25x44.45x2.00mm (19505)@1.51kg/mt Middle 83.50x44.45mm (20111) @1.497kg/mtand 5mm, glazing clips 19x17.3x0.9 (19630)@0.124kg/mt, Pre-laminated cement bonded particle board- 12 mm thick (SOR:311), door lock, 200mm long alluminium tower bolt, door closure, Aluminium Door Handles ,8.00mm dia galvonised rod with nuts, neopan gasket, all brackets, hardware, screws, Etc. including cost and conveyance of all materials, labor charges for making and fixing etc., complete for finished item of work.

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;Supply and fixing of powder coated alluminum fixed glazed partition withr using allround frame , by using Alluminum , using suitable glazing clips 19x17.3x0.9 (19630) 1.092kg/mt ,MDF Board: exterior-Both Side Laminated -12 mm thick SOR:285, alluminimum brackets, and 5" Hinges, Galvonized 8mm rod with nuts including cost and conveyance of all materials, labor charges for making and fixing etc., complete for finished item of work

provding control room office rooms (2nos) with aluminium partition and minor repair works in meeting;civil works