Telangana State Tourism Development Corporation Tender

Eegalapenta Arrival Zone (Srisailam Dam View Point) and Eegalapenta Promenade under Development of S;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm

Eegalapenta Arrival Zone (Srisailam Dam View Point) and Eegalapenta Promenade under Development of S;Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 200 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 250 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. 1 no. Aldrops (IS:15834) 200 mm long & 4 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete excluding all other taxes for finished item of work. (Door size 2.0 X 2.1m)

Eegalapenta Arrival Zone (Srisailam Dam View Point) and Eegalapenta Promenade under Development of S;Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.