Telangana State Power Generation Corporation Limited Tender

Supply, fabrication and fixing of wooden wardrobes , cots etc., in CETD New project Hostel building;Supply, fabrication & fixing of Wooden Cot of Size (3' x 6'6") by using 9 Ply 18mm thick Moisture Resistant Grade Plywood conforming to IS:303 MR Grade for head board of height 1.08m, leg board of height 0.36m, sides of height 0.36m, supports to plank (Minimum 3 supports) inside the cot, laying single plywood sheet for cot, pasting Melamine laminated Sheet Mat Finish of 1.50 mm thick for both inside and outside faces of cot except plank, fixing, cutting, assembling, fixing in position with wood adhesive, heavy L-angles, nuts, including cost and conveyance of all materials, labour charges, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer-In- Charge. (head board, leg side & sides shall be double skinned, i.e. 2 Nos of 9 Ply I8mm thick Moisture Resistant Grade Plywood sheets joined together and used as single piece)

Supply, fabrication and fixing of wooden wardrobes , cots etc., in CETD New project Hostel building;Supply, Fabrication and fixing of Wardrobe (2.04m x 0.45 m x 2.00m) by using 9 Ply - 18 mm thick Plywood conforming to IS:303 MR (MOISTURE RESISTANT) Grade for front side, Top side, Bottom side, middle shelves, vertical partition & side verticals and back side & 2 Nos. drawer (1 .0 m x 0.45 m x 0.25 m) with 9 Ply - 12 mm thick plywood conforming to IS:303 MR Grade, covered with 1.0 mm thick Melamine Laminated Sheet - Glossy Finish, including Stainless Steel Door Handles- 150 mm Long for doors, Stainless Steel Door Handles- 100 mm Long for drawers, min. 300 mm drawer channel, Godrej locks for doors & drawers, magnet catchers, box hinges, SS Tower Bolt - 100 mm long, 19 mm dia. 0.80m to 1 m long- Stainless steel 304 grade hanger pipes with end supports, Mirror of size 850 x 450 x 6 mm, 4" SS legs, wood adhesive compound, L-angles and screws etc. Cost includes all material charges, conveyance charges, lift charges, labour charges for wrought, fixing with all necessary fixtures and fittings etc., complete for finished item of work and as directed by the Engineer in Charge.