Telangana State Power Generation Corporation Limited Tender

Providing Cup boards for I and C Mechanical Lab in service building, elctronic lab in UCB;Supply and fixing Aluminium partly glazed door - Single Shutter with aluminium door frames as per approved drawing with aluminium anodized sections of Jindal or approved equivalent make sections and outer frame top horizontals & both verticals of size 114.30x44.45x3.18 shutter frame top, 150.00x44.45x3.10 bottom and verticals of size 83.50x44.45x3.0 and middle lock rail of 100x44.45x3.0 with plain float glass 6 mm thick fixed on top and 12mm thick particle board fixed on bottom including supply and fixing aluminium handles of 450mm for shutter, mortice lock, 6/7 levers, aluminium extruded section body tubular type hydraulic door closer (IS:3564) with double speed adjustment with necessary accessories and screws etc and all labour charges for fixing the fixtures with required no. of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. Completed for finished item of work as approved by Engineer-in-charge.

Providing Cup boards for I and C Mechanical Lab in service building, elctronic lab in UCB;Supply and fixing of frosted stickering in approved design for aluminium partition glass including cost and conveyance of all materials and fittings, all required hardware, all labour charges, leads and lifts, all taxes, incidental charges etc. Complete for finished item of work and as directed by the Engineer-in-Charge.

Providing Cup boards for I and C Mechanical Lab in service building, elctronic lab in UCB;Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10mm Cement Bonded Prelaminated Particle Board and 5.00mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to floor, ceiling, pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution including cost and conveyance of all materials, all labour charges, incidental charges, all leads and lifts etc. Complete for finished item of work and as directed by the Engineer-in-Charge.