Telangana State Portal Roads And Buildings Tender

Work;Supply, delivery and assembling at site, Steel Cot ( Single Cot) of following specifications: The Cot of bed should be 1900 mm (L) x 800 mm (W) x 460 mm (H). The sheet should be made of CR top with 18 guage (1.22 mm) thick CR sheet should be crimped on four sides to a depth of 50 mm so as to accommodate welding with M.S.flat of size 50x3 mm all round the inner edge of the crimp of the sheet. The top of the bottom welded with 2 nos. reinforced with two formed channels to size 75 mm width and 15x50x50x50x 15 mm of 1 mm thickness flanges arc welded inside the length wise with 5 inches gap. Legs frame CR tube 31 mm round 1.6 guage (Thickness) the Headbow height should be made of 700 mm height and legbow 600 mm height. One Horizontal and two vertical CR tube 19.5 mm 1.22 guage thickness. Epoxy polyster powder coating plain mat gray only DFT (Dry Film Thickness) of 45 microns as per IS101. The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, including GST and all other taxes , complete for finished item of work. The item shall carry a warranty period of 3 years (36 months) from the date of supply. The total weight of the item shall not be less than 38 kgs.