Police Housing Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 14,160
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
210558Bid Award Id
ViewTender No
T60/2020-21Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://http://www.tsphcl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos DB Makes: Legrand / Schneider. Isolator Make: Legrand-DX3 / Schneider-Acti9. MCB Make: Legrand-DX3 / Schneider-Acti9.
2
-
16651.42
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and run of 2 Pair, 0.5mm telephone copper wire in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Make: Finolex/Delton/Polycab.
60
-
1371
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Make: D Link / AMP / Molex / Legrand / Krone.
120
-
4364.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Make: Polycab/Power Flex / Nakoda.
400
-
9008
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Polycab/Power Flex / Nakoda.
400
-
28952
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Fixing of LED luminaire 18W Down lights with all necessary accessories in false ceiling / on wall including giving connections and all labour charges etc., complete.
6
-
762.66
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and transportation of 18W back lit LED Down Light Recessed / Surface mounting round/square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI>80, and THD is less than 15% etc., complete. LUMINAIRE MAKE: OSRAM / Crompton / Havells. LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA /OSRAM. Model No: LSDN-18-CDL/TL/WW or its equivalent model.
6
-
15685.68
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Labour charges for fixing of Exhaust fan in wall with necessary connections etc., complete. (for hole already made available)
6
-
2427
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply of 12" (300mm) Light duty exhaust fan with wire guard etc., complete. Make: Crompton / Bajaj Bahar WG / Havells Ventilair-DB / Orient hill air.
6
-
9419.04
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Fixing of 20W LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.
30
-
5147.1
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and transportation of 20W, 2000 lumens, T8, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete. LUMINAIRE MAKE: OSRAM / Crompton. LED MAKE: PHILIPS LUMILEDS/CREE/ NICHIA/OSRAM. Model No: LTT8-20 or its equivalent model of Linear LED T8 tubular lamp with extruded aluminium body, PC diffuser and inbuilt driver.
30
-
31425.9
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges without bulb (for new installation). BH Make: Anchor / Gold Medal Olive / Million Zoom.
8
-
620.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering etc., complete.
12
-
1090.68
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Labour charges for fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
12
-
2628.36
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply of Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete. Make: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
12
-
7594.08
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply of 48" (1200mm) 5 star rated Sweep ISI mark Ceiling Fan as per IS 374 - 1979. Make: Crompton / Orient.
12
-
27471.48
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of 8 Port manageble switches including giving connections cost of all accessories and all labour charges etc., complete. Make: CISCO / Net Gear / HP / D link.
2
-
2694.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of Modular socket type Telephone jack with Connector on 2 moduler hot dip galvanized metal box and 2 modular cover frame including giving connections, cost of all accessories and labour charges etc., complete. Telephone jack with Connector, Cover frame & Metal box Make: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
4
-
1367.28
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate on 2 moduler hot dip galvanized metal box including giving connections, cost of all accessories and labour charges etc., Complete. I/O & duel face plate Make: D Link / AMP / Molex / Legrand / Krone. Metal box make: Legrand / Schneider.
8
-
4107.04
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete. [For computer switch board] Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
8
-
8013.04
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete. [For 2 Socket board] Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
12
-
12019.56
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete. [ Power plug ] Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
2
-
1462.46
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
4
-
2085.36
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with suitable Module Hot Dip Galvanized modular type Metal Box covered with suitable Modular Cover Frame, with 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Copper wire make: Polycab / Power Flex / Nakoda. Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor /Schneider Zen celo / Honeywell Blenge Plus. Ceiling Rose Make: Anchor / Gold Medal Olive / Million Zoom.
56
-
35445.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and Fixing of 25mm outer dia HEAVY GRADE, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in underneeth the floor with all required accessories including masonary work and labour charges etc., complete. Make: Sudhakar / Modi/ Precision ( ISI mark).
100
-
8085
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and Fixing of 25mm outer dia Heavy GRADE, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan, common and separate plug point including all labour charges etc., complete. Make: Sudhakar / Modi/ precision ( ISI mark).
250
-
25870
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and Fixing of 25mm outer dia HEAVY GRADE, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Make : Sudhakar / Modi/ precision (ISI mark).
200
-
16824
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;CONSTRUCTING 914.40 MM ( 3'-0") DIA FLY ASH BRICK MASONARY MAN HOLE AS PER IS-4111:PART-1:1996 WITH CM (1:6) PROP. USING FLY ASH BRICKS OF 225MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 5N/SQ.MM INCLUDING PLASTERING WIH CM(1:3) PROP. 12 MM THICK BOTH INSIDE AND OUTSIDE, FITTED WITH 20'' DIA RCC COVERS AND FRAMES, INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, COST OF SEIGNIORAGE CHARGES ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.
6
-
50022.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING, LAYING, JOINTING AND TESTING OF 150.0 MM DIA SWG SP-1 PIPES OF ISI MAKE CONFIRMING TO ISI:651&4127, WITH AIRTIGHT CEMENT JOINTS IN CM(1.5:1) PROP. INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M (3'-0") DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
8303
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND LAYING 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
3296
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE TEE (WITH DOOR) AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
1466
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
943
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
216
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING, LAYING, JOINTING AND TESTING OF 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
40
-
19980
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE
4000
-
32000
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 15.00 MM G.I UNION HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
4
-
186.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 25.00 MM G.I UNION HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
4
-
336.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING GM GATE (PEET) VALVES - 20 MM NB SIZE INDIAN MAKE HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
4
-
3615.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 15.90 MM OD PIPES - SDR 13.5
20
-
2908
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES - SDR 13.5
20
-
3318
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.20 MM OD PIPES - SDR 13.5
20
-
4386
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 19.04 MM DIA, 609.60 MM LONG ALUMINUM ANODISED TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
6
-
999.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK.
6
-
1689
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2MM T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
6
-
3493.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
761
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
1216
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
761
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
943
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING UV RESISTANT UPVC SWR SINGLE 'Y' WITH DOOR - 110MM DIA INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK .
10
-
1931
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING UV RESISTANT UPVC SWR PLAIN SINGLE 'Y' 75MM DIA INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK .
10
-
829
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE TEE (WITH DOOR) AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
-
490.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE TEE (WITH DOOR) AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
1466
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 75MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
159
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 110MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
216
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING 76.2 MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
-
688.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND FIXING IN POSITION 584.2MM LONG ORISSA PAN WITH 100MM 'P' OR 'S' TRAP INCLUDING PROVIDING BRICK MASONRY SEAT USING 2ND CLASS BRICK AS PER STADARD PRACTICE AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
-
6052.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
-
22761.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 300GRAMS SEICO/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS INCLUDING WOODEN BLOCK AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.
6
-
11129.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING GM GATE (PEET) VALVES - 25MM NB SIZE INDIAN MAKE HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
6
-
7747.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING GM GATE (PEET) VALVES - 20 MM NB SIZE INDIAN MAKE HEAVY DUTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
8
-
7231.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND LAYING 75 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
-
7206
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING, LAYING, JOINTING AND TESTING OF 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK
40
-
19980
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING OF 150MMX100MM SWG GULLY TRAP CONFIRMING TO ISI 651 & 4127 WITH CI GRATING AND CONSTRUCTION OF BRICK MASONRY INTERMEDIATE CHAMBER OF SIZE 20"X14"X12" IN CM (1:6) OVER CC (1:5:10) PROP. BED OF SIZE 20"X14"X4" AND PLASTERING WITH 12MM THICK IN CM (1:4) PROP. BOTH INSIDE AND OUTSIDE SURFACES AND FITTED WITH 9"X12" (230X305MM) RCC (1:11/2:3) 1 1/2" THICK COVER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
6
-
3556.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;S&F N.P 15.00MM BRASS BIB TAP CP FINISH 300 GRAMS DIA INDIAN MAKE SEIKO/SENIOR/NICE OR EQUIVALENT INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE , LABOUR CHARGES FOR FIXING ETC., COMPLETE FOR FINISHED ITEM OF WORK( 300 GRAMS).
6
-
1659
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND FIXING OF 28.60MM OD PIPE - SDR 11 ASHIRVAD / ASTRAL OR EQUIVALENT PREMIUM MAKE CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 13.5 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
-
11700
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND FIXING OF 22.20MM OD PIPE - SDR 11 ASHIRVAD / ASTRAL OR EQUIVALENT PREMIUM MAKE CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 13.5 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
-
9770
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLY AND FIXING OF15.9MM OD PIPE - SDR 11 ASHIRVAD / ASTRAL OR EQUIVALENT PREMIUM MAKE CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 13.5 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
-
8010
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;DOOR: 0.75X2.10 SUPPLING POSITIONING AND FIXING OF BIS MARK, STANDARD MAKE PRE POLISHED FLUSH DOOR SHUTTER OF 35MM MADE UP OF THICK SOLID WOOD INFILL CORE WITH NATURAL TEAK VENEER ON ONE SIDE AND COMMERCIAL PLY ON OTHER SIDE OF SPECIFIED COLOUR, SHADE, FINISH AS APPROVED BY ENGINEER - IN - CHARGE AND INTERNAL TEAK LIPPING ALROUND, INCLUDING SUPPLYING AND FIXING OF PRE POLISHED MEDIUM QUALITY KILN SEASONED SOLID RED MERANTI HARD WOOD FRAME (WITH OUT THRESHOLD) OF SECTION 100MMX62MM, WHICK SHOULD BE FIXED TO WALL ON BOTH SIDES WITH ANCHOR FASTENRS OF SIZE 10X100MM. 3NOS ON EITHER SIDE OF WALL AND GAP BETWEEN WALL AND FRAME SHOULD BE FILLED WITH Poly-Urethane (PU) Foam (GAP, SHOULD NOT MORE THAN 10MM) AND ARCHITRAVES OF 40X10MM AND 20X10MM WILL BE NAILED ON THE FRAME, INCLUDING 3NOS OF SSPC HINGES OF SIZE 125MM LONG, 1NO 200MM LONG SS TOWER BOLT. 2NOS SS DOOR HANDLES OF 125MM LONG & 1NO SS ALROP OF 250MM LONG. POLISHING SHALL BE DONE WITH Poly-Urethane (PU) ON ONE SIDE AND PIGMENTED Poly-Urethane (PU) GLOSSY/MATT FINISH TO THE WOOD WORKS DULY CLEANING THE SURFACE AND APPLYING EMERY PAPER, SAND THE WOOD WITH 180 NOS, EMERY PAPER AND THEN WITH 320NO., EMERY PAPER, CLEAN & WIPE OFF LOOSE DUST, APPLYING SUITABLE KNIFING PASTE FILLER/WOOD FILLER BY PUTTY KNIFE/MUSLIN PAD, AIR DRY FOR 2-3 HOURS, SAND WITH 180 AND 320NO., EMERY PAPER, APPLY TWO COMPONENT WOOD SEALER, AIRE DRY FOR 24HOURS, SAND WITH 320NO., EMERY PAPER, APPLY ONE COAT OF APPROVED SPRAYING THINNER (FOR SPRAYING)/APPLYING ONE COAT OF APPROVED BRUSHING THINNER OR GENERAL PURPOSE THINNER (FOR BRUSHING) AND APPLY (EITHER WITH SPRAY OR BRUSH) TWO COATS OF APPROVED BRAND MELAMINE OF SHADE AS APPROVED BY THE ENGINEER IN CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, EMERY PAPERS, COST OF THINNER & MELAMINE POLISH OF APPROVED BRANDS SUCH AS JENSON & NICHOLSON, ASAIN PAINTS, BERGER PAINTS OR EQUIVALENT ETC AS APPROVED BY THE ENGINEER IN CHARGE. FIXING SHALL BE DONE WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIAL TO SITE, LABOUR CHARGES FOR FIXING FRAME AND SHUTTER ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER - IN - CHARGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF DOORSET SC OR SS, BIS MARK & GOT APPROVED BY THE ENGINEER - IN - CHARGE) NOTE: NECESSARY REUSABLE TEMPLATES OF STEEL SHALL BE FIXED TO THE OPENING BEFORE PROCEEDING TO BRICK WORK, SO AS TO MAINTAIN CORRECT SIZES.
9.46
-
77895.53
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;DOOR: 0.90X2.10 SUPPLING POSITIONING AND FIXING OF BIS MARK, STANDARD MAKE PRE POLISHED FLUSH DOOR SHUTTER OF 35MM MADE UP OF THICK SOLID WOOD INFILL CORE WITH NATURAL TEAK VENEER ON ONE SIDE AND COMMERCIAL PLY ON OTHER SIDE OF SPECIFIED COLOUR, SHADE, FINISH AS APPROVED BY ENGINEER - IN - CHARGE AND INTERNAL TEAK LIPPING ALROUND, INCLUDING SUPPLYING AND FIXING OF PRE POLISHED MEDIUM QUALITY KILN SEASONED SOLID AFRICAN TEAK WOOD FRAME (WITH OUT THRESHOLD) OF SECTION 100MMX62MM, WHICK SHOULD BE FIXED TO WALL ON BOTH SIDES WITH ANCHOR FASTENRS OF SIZE 10X100MM. 3NOS ON EITHER SIDE OF WALL AND GAP BETWEEN WALL AND FRAME SHOULD BE FILLED WITH Poly-Urethane (PU) Foam (GAP, SHOULD NOT MORE THAN 10MM) AND ARCHITRAVES OF 40X10MM AND 20X10MM WILL BE NAILED ON THE FRAME, INCLUDING 3NOS OF SSPC HINGES OF SIZE 125MM LONG, 1NO 200MM LONG SS TOWER BOLT. 1NO OF DOORSET MORTICE LEVER LOCK (KY) SC FINISH & 1NO.DOOR STOPPER. POLISHING SHALL BE DONE WITH Poly-Urethane (PU) ON ONE SIDE AND PIGMENTED Poly-Urethane (PU) GLOSSY/MATT FINISH TO THE WOOD WORKS DULY CLEANING THE SURFACE AND APPLYING EMERY PAPER, SAND THE WOOD WITH 180 NOS, EMERY PAPER AND THEN WITH 320NO., EMERY PAPER, CLEAN & WIPE OFF LOOSE DUST, APPLYING SUITABLE KNIFING PASTE FILLER/WOOD FILLER BY PUTTY KNIFE/MUSLIN PAD, AIR DRY FOR 2-3 HOURS, SAND WITH 180 AND 320NO., EMERY PAPER, APPLY TWO COMPONENT WOOD SEALER, AIRE DRY FOR 24HOURS, SAND WITH 320NO., EMERY PAPER, APPLY ONE COAT OF APPROVED SPRAYING THINNER (FOR SPRAYING)/APPLYING ONE COAT OF APPROVED BRUSHING THINNER OR GENERAL PURPOSE THINNER (FOR BRUSHING) AND APPLY (EITHER WITH SPRAY OR BRUSH) TWO COATS OF APPROVED BRAND MELAMINE OF SHADE AS APPROVED BY THE ENGINEER IN CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, EMERY PAPERS, COST OF THINNER & MELAMINE POLISH OF APPROVED BRANDS SUCH AS JENSON & NICHOLSON, ASAIN PAINTS, BERGER PAINTS OR EQUIVALENT ETC AS APPROVED BY THE ENGINEER IN CHARGE. FIXING SHALL BE DONE WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIAL TO SITE, LABOUR CHARGES FOR FIXING FRAME AND SHUTTER ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER - IN - CHARGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF DOORSET SC OR SS, BIS MARK & GOT APPROVED BY THE ENGINEER - IN - CHARGE) NOTE: NECESSARY REUSABLE TEMPLATES OF STEEL SHALL BE FIXED TO THE OPENING BEFORE PROCEEDING TO BRICK WORK, SO AS TO MAINTAIN CORRECT SIZES.
15.12
-
133731.86
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND FIXING OF UNPLASTICISED POLY VINYL CHLORIDE (UPVC) SLIDING WINDOWS TWO TRACK - SLIDING DULY MANUFACTURED USING UPVC REINFORCED PROFILES OF (62MM X 60 MM)/ (60MM X 45 MM) X 2.0 MM FOR OUTER FRAMES, (66MM X 38 MM)/(39 MM X 58 MM) X 2.00 MM FOR SLIDING SHUTTER FRAMES CAPABLE OF MOUNTING SINGLE GLAZING SYSTEM, STRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIMUM THICKNESS OF 1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING THE WINDOW SASH SHALL BE FITTED WITH 5 MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE DULY FIXED WITH TPV GASKETS/ EPDM WEATHERING SEAL RESISTANT ACCESSORIES LIKE LOCKING SYSTEM 1 NO., PER SET OF SASHES AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE WITH TEMPLATES FOR CASEMENT SIZING COMPLETE FOR FINISHED ITEM OF WORK
18
-
130374
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification.
64
-
68121.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
60
-
19776
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;DADOOING WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNSAS APPROVED BY EXECUTIVE ENGINEER APPROVED BY EXECUTIVE ENGINEER, SET OVER 12MM THICK CM (1:3) BASE COAT AND NEAT GREY CEMENT SLURRY OF HONEY LIKE CONSISTENCY AT THE RATE OF 3.3 KGS PER SQ.MT AND JOINTED WITH 2 KGS WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO MATCH THE SHADE OF TILES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LIFTING (MANNUAL), ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS MIXING MORTAR, FIXING TILES IN POSITION, INCLUDING LIFT CHARGES, CURING, CUTTING THE BRICK MASONARY WALLS AND REDOING THE SAME SUCH THAT THE TOP SURFACE OF TILES IS TO BE FLUSHED WITH PLASTERED SURFACE ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR.
80
-
71376
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;FLOORING WITH SUPPLY OF NON-SKID RED OR WHITE FULL BODY CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS OR AS APPROVED BY THE ENGINEER - IN -CHARGE ,OF APPROVED PATTERN FOR FLOORING SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES, LIFTING ( MANNUAL), INCLUDING CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, GROUND FLOOR (APSS.NO:701&707).
20
-
18056
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;FLOORING WITH HIGH POLISHED GRANITE SLABS 16 TO 18MM THICK UPTO 8'-00"(2.43M) OTHER THAN BLACK REGULAR SET OVER BASE COAT OF CEMENT MORTAR (1:8), 20 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND STONES ETC., COMPLETE, INCLUDING CHARGES, LABOUR CHARGES FOR DRESSING OF STONES ETC., COMPLETE FOR FINISHED ITEM OF WORK. STAIRCASE.
10
-
42405
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;FLOORING WITH Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1ST QUALITY CONFORMING TO 3711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING CHARGES, LIFTING (MANUAL) ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR
130
-
159146
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PAINTING WITH EXTERIOR EMULSION PAINT OF APPROVED MAKE AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIECTED 2COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 Ml OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION Etc., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK IN GROUND FLOOR (APSS NO:908).
320
-
78432
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PAINTING TO NEW WALLS & CEILING WITH THREE (3) COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE (ASIAN /BERGER /NEROLAC /SAICOAT /INDOCEM OR EUIVALENT) OVER ONE COAT OF PRIMER OF APP BRAND AFTER THOUROULY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDER MATERIALS INCLUDING COST OF ALL MATERIALS TO THE INTERIOR FACES OF WALLS AS DIECTED 2COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750ML OF WATER WITH AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS (TOTAL3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR
460
-
89102
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.
780
-
187278
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR (APSS NO: 901&904)
780
-
398502
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PLASTERING TO SUPERSTRUCTURE 20MM THICK WITH A BASE COAT OF 16 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. BASEMENT (APSS NO: 901&904)
120
-
63780
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE IN CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN, INCLUDING COST OF ALL MATERIALS, SEIGNIORAGE CHARGES, COST & CONVEYANCE OF ALL MATERIALS, INCIDENTAL, OERATIONAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS.NO: 901&903)
170
-
97359
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. GROUND FLOOR (APSS NO: 901 & 904)
240
-
127512
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PROVIDING "HYSD/TMT" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER Fe 500 GRADE (AS PER IS 1786 - 2008 AND ALL ITS LATEST AMMENDMENTS) FROM PRIMARY STEEL PRODUCERS LIKE TATA, SAIL, VSP, JSW & SHYAM STEEL FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
9.5
-
651491
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;MASONRY work IN PROP WITH AERATED (CELLULAR)AUTOCLAVED CONCRETE BLOCKS REPUTED BRANDS XTRALITE FROM ULTRATECH AEROCON FROM HILL, CONFORMING TO IS:2185(PART-3)-1984AND IS:6441-1972 OF COMPRESSIVE STRENTH 3N/mm2 600X200X100MM AND CHEMICAL JOINTING COMPOUND OF SAME BRAND, INCLUDING COST AND COVEYANCE OF ALL MATERIALS LABOUR CHARGES SEIGNORANG CHARGES SCAFFOLDING AND CURING ETC, COMPLETE FOR GROUND FLOOR.(APSS NO.501&504).
23
-
179439.1
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;MASONRY work IN PROP WITH AERATED (CELLULAR)AUTOCLAVED CONCRETE BLOCKS REPUTED BRANDS XTRALITE FROM ULTRATECH AEROCON FROM HILL, CONFORMING TO IS:2185(PART-3)-1984AND IS:6441-1972 OF COMPRESSIVE STRENTH 3N/mm2 600X200X230MM AND CHEMICAL JOINTING COMPOUND OF SAME BRAND, INCLUDING COST AND COVEYANCE OF ALL MATERIALS LABOUR CHARGES SEIGNORANG CHARGES SCAFFOLDING AND CURING ETC, COMPLETE FOR GROUND FLOOR.(APSS NO.501&504).
38
-
274869.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;RCC M-20 GRADE NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4)PROP -GROUND FLOOR (APSS NO.403)
3
-
3050.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;RCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT NOT LESS THAN 380 KGS/ CUM, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, , ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING (MANUAL), LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK EXCLUDING GST AND SEIGNIORAGE CHARGES. FOR FOR GROUND FLOOR RACKS OF 25MM THICK(APSS NO. 402)
3
-
738
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE, INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC..,,FOR UNSUPPORTED HEIGHT 3.66 M ,VIBRATING,CURING , LIFTING (MANUAL) ETC COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR GROUNDFLOOR SLABS OF 125 MM THICK (APSS NO.403)
22
-
268712.4
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING (MANUAL),LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK . FOR GROUND FLOOR BEAMS (APSS NO.403)
22
-
280040.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;RCC M-20 GRADE NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. GROUND FLOOR LINTELS (APSS NO.403)
2
-
24273.2
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING (MANUAL),LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE AND PROVIDING CENTERING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK . FOR GROUND FLOOR COLOUMNS (APSS NO.403)
10
-
135737
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;PROVIDING "HYSD/TMT" STEEL BARS OF DIFFERENT DIAMETERS BELOW 36MM DIAMETER Fe 500 GRADE (AS PER IS 1786 - 2008 AND ALL ITS LATEST AMMENDMENTS) FROM PRIMARY STEEL PRODUCERS LIKE TATA, SAIL, VSP, JSW & SHYAM STEEL FOR REINFORCEMENT INCLUDING CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING THEM IN POSITION WITH COVER BLOCKS OF APPROVED SHAPE AND SIZE, TYING FIRMLY WITH M.S BINDING WIRE OF SWG, FORMING GRILLS FOR REINFORCEMENT WORKS AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK INCLUDING COST AND CONVEYANCE OF DEFORMED BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, WELDED JOINTS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL OPERATIONAL, INCIDENTAL LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED.
4
-
274312
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE AND SALES & OTHER TAXES ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PLINTH BEAMS (APSS NO.403)
26
-
334464
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE AND SALES & OTHER TAXES ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PEDESTALS (APSS NO.403)
6
-
65010.6
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;VRCC M-20 NOMINAL MIX(CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE AND SALES & OTHER TAXES ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR FOOTINGS (APSS NO.403)
26
-
265103.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;CEMENT CONCRETE (1:4:8) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402).
34
-
173757
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;FILLING WITH CARTED GRAVEL IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT WITH INITIAL LEAD IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
140
-
53046
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;RE-FILLING WITH USEFUL AVAILABLE EXCAVATED EARTH OTHER THAN EXPANSIVE SOILS LIKE RED EARTH AND ORDINARY GRAVEL ETC., (EXCLUDING ROCK) IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT WITH INITIAL LEAD IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES , HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310)
60
-
2898
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNORAGE CHARGES,LABOUR CHARGES, CURING, ETC., COMPLETE FOR FOUNDATIONS AND BASEMENTS FOR FINISHED ITEM OF WORK. APSS NO: 615).
38
-
183315.8
RC TYPE D at JAGATHGIRIGUTTA MAILARDEVPALLY;EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, DEWATERING SITE CLEARANCE, CLEARING SHURBS, BRUSHWOOD, UNDER GROWTH AND SMALL TREES NOT EXCEEDING 300 MM GIRTH, MEASURED AT ONE METRE ABOVE GROUND ETC., COMPLETE FOR FINISHED ITEM OF WORK INCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOUNDATION OF BUILDING (APSS 308).
300
-
129180
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements