Police Housing Corporation Limited Tender

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR FOOTINGS (APSS NO.403)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PEDESTALS (APSS NO.403)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PLINTH BEAMS (APSS NO.403)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM FOR MANUFACTURING OF FLYASH SOLID BLOCKS USING FLYASH OF 80 KGS, CEMENT OF 15 KGS. GYPSUM OF 5 KGS. AND STONE DUST INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE WITH A COMPRESIVE STRENGTH NOT LESSTHAN 50 KG/SQM FOR WALLS FOR SUPERSTRUCTURE WALLS OF 225MM THICK .(APSS NO.501 & 504).

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;VRCC M-20 GRADE NOMINAL MIX CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND SEIGNIORAGE, SALES & OTHER TAXES ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR COLUMNS (APSS NO.403)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;PLASTERING TO SUPERSTRUCTURE 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, Lifting ( Mannual),CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK GROUND FLOOR (APSS NO: 901&904)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;COLOUR WASH OF TWO COATS WITH SURYACEM OF APPROVED QUALITY TO GIVE AN EVEN SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS INCLUDING COST OF ALL MATERIALS, LOABOUR CHARGES AND INCIDENTAL SUCH AS SCAFFOLDING, LIFT CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK, BUT EXCULUDING CONVEYANCE CHARGES OF MATERIALS

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;PAINTING TO NEW IRON WORK TWO COATS OVER PRIMER COAT WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES INCLUDING PUTTY, ALL INCIDENTAL, OPERATIONAL CHARGES ETC., COMPLETE (THE RATE INCLUDES ONE COAT OF PRIMER AND TWO COATS OF PAINT ) (APSS NO.1201, 1207, 1212).FOR FINISHED ITEM OF WORK

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;PROVIDING HYSD/ TMT STEEL BARS ( Fe 500 GRADE AS PER IS 1786 - 1979) OF DIFFERENT DIAMETERS FOR RCC WORKS, INCLUDING LABOUR CHARGES FOR STRAIGHTENING, CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING IN POSITION WITH COVER BLOCKS OF MATERIALS AND SIZE AND TYING AND LAP SPLICING WITH BINDING WIRE OF 18 SWG, FORMING GRILLS FOR REINFORCEMENT WORK AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK, INCLUDING COST AND CONVEYANCE OF STEEL BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING INCLUDING SALES AND OTHER TAXES ON ALL MATERIALS ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED (APSS NO.126)

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;SUPPLY AND FIXING OF "U" SHAPED FRAME SUPPORTED BY ANOTHER VERTICAL POLE MADE WITH M.S. ANGLES OF SIZE 65MMX65MMX65MM THICK INCLUDING FIXING OF NUTS AND BOLTS INCLUDING COST AND CONVEYANCE OF ALL LABOUR CHARGES, FABRICATION ETC., FOR FINISHED ITEM OF WORK. BUT EXCULUDING COST OF BARBED WIRE, CHAIN LINK AND C.C BED, NUTS,BOLTS WITH FLAT ETC., COMPLETE FOR THE FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER - IN CHARGE

COMPOUND WALL AT CAR HEAD QUATERS KHAMMAM;PROVIDING AND FIXING CONCERTINA COIL FENCING WITH PUNCHED TAPE CONCERTINA COIL 600 MM DIA 10 METRE OPENABLE LENGTH ( TOTAL LENGTH 90 M), HAVING 50 NOS ROUNDS PER 6 METRE LENGTH, UPTO 3 M HEIGHT OF WALL WITH EXISTING ANGLE IRON 'Y' SHAPED PLACED 2.4M OR 3.00 M APART AND WITH 9 HORIZONTAL R.B.T. REINFORCED BARBED WIRE, STUD TIED WITH G.I. STAPLES AND G.I. CLIPS TO RETAIN HORIZONTAL, INCLUDING NECESSARY BOLTS OR G.I. BARBED WIRE TIED TO ANGLE IRON, ALL COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE, WITH REINFORCED BARBED TAPE(R.B.T.) / SPRING CORE (2.5MM THICK) WIRE OF HIGH TENSILE STRENGTH OF 165 KG/ SQ.MM WITH TAPE (0.52 MM THICK) AND WEIGHT 43.478 GM/ METRE (COST OF M.S. ANGLE, C.C. BLOCKS SHALL BE PAID SEPARATELY)