Police Housing Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 21,240
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
186899Bid Award Id
ViewTender No
T25/2020-21Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://http://www.tsphcl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
FILLING WITH GRAVEL IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT WITH INITIAL LEAD IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES, HIRE CHARGES OF T & P ETC., COMPLETE FOR FINISHED ITEM OF WORK . (APSS NO. 309 & 310)
100
-
579.5
RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, CURING, ETC.,COMPLETE FOR FOUNDATIONS AND BASEMENTS FOR FINISHED ITEM OF WORK. APSS NO: 615).
35
-
4705.9
PLASTERING TO SUPERSTRUCTURE 20 MM THICK WITH A BASE COAT OF 16 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK (APSS NO: 901&904)
50
-
499.2
PROVIDING MASONRY WORK WITH AERATED (CELLULAR) AUTOCLAVED CONCRETE BLOCKS OF REPUTED BRANDS XTRALITE FROM ULTRATECH, AEROCON FROM HIL, CONFORMING TO IS:2185 (PART-3) - 1984 AND IS:6441-1972 OF COMPRESSIVE STRENGTH 3 N/MM2 600 X 200 X 230 MM - AND CHEMICAL JOINTING COMPOUND OF SAME BRAND, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, , SCAFFOLDING AND CURING ETC., COMPLETE FOR GROUND FLOOR FOR 200 MM THICK
24
-
6866.2
PROVIDING MASONRY WORK WITH AERATED (CELLULAR) AUTOCLAVED CONCRETE BLOCKS OF REPUTED BRANDS XTRALITE FROM ULTRATECH, AEROCON FROM HIL, CONFORMING TO IS:2185 (PART-3) - 1984 AND IS:6441-1972 OF COMPRESSIVE STRENGTH 3 N/MM2 600 X 200 X 100 MM - AND CHEMICAL JOINTING COMPOUND OF SAME BRAND, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, , SCAFFOLDING AND CURING ETC., COMPLETE FOR GROUND FLOOR FOR 100 MM THICK
2.5
-
7484.7
PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting (Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR BED BLOCKS IN GROUND FLOOR FOR FINISHED ITEM OF WORK (APSS NO: 402).
0.5
-
6305
VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR FOOTINGS (APSS NO.403)
30
-
9943
VRCC M-20 NOMINAL MIX(CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PEDASTALS (APSS NO.403)
5.5
-
10521.5
VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS, SHUTTERING, CENTERING WITH STEEL PLATES, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LAYING CONCRETE, VIBRATING, CURING ETC., COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK. FOR PLINTH BEAMS (APSS NO.403)
9
-
12468.5
VRCC M - 20 NOMINAL MIX(1:1 1/2: 3) (Cement:fine aggregate: coarse aggregate) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND ON ALL MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING ( MANNUAL), LAYING CONCRETE, VIBRATING, CURING ETC.,COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK (APSS NO.403) FOR GROUND FLOOR COLUMNS
8
-
12124.2
VRCC M - 20 NOMINAL MIX (Cement:fine aggregate: coarse aggregate) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE ON ALL MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING ( MANNUAL), LAYING CONCRETE, VIBRATING, CURING ETC.,COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK (APSS NO.403) FOR GROUND FLOOR BEAMS
9.2
-
11011.7
VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE, INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 3.66 M ,VIBRATING,CURING , WINCH CHARGES ETC COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK . FOR GROUND FLOOR SLABS OF 125 MM THICK (APSS NO.403)
16.5
-
10662.5
VRCC M-20 NOMINAL MIX (CEMENT : FINE AGGREGATE : COARSE AGGREGATE) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND) , COARSE AGGREGATE, WATER ETC., TO SITE, ON ALL MATERIALS, ALL INCIDENTAL, OPERATIONAL AND LABOUR CHARGES SUCH MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 400 KGS PER CUM OF CONCRETE, INCLUDING CENTERING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES,ETC.,FOR UNSUPPORTED HEIGHT 3.66 M ,VIBRATING,CURING , WINCH CHARGES ETC COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK . FOR GROUND FLOOR 230 MM THICK WALLS
10
-
13094.6
RCC M - 20 NOMINAL MIX (Cement:fine aggregate: coarse aggregate) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND INCLUDING SEIGNIORAGE CHARGES, SALES & OTHER TAXES ON ALL MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING ( MANNUAL), LAYING CONCRETE, CURING ETC.,COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK (APSS NO.403) FOR GROUND FLOOR LINTELS
0.8
-
11742.1
RCC M - 20 NOMINAL MIX (Cement:fine aggregate: coarse aggregate) CORRESPONDING TO TABLE 9 OF IS 456 USING 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL (COARSE AGGREGATE) FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, FINE AGGREGATE (SAND), COARSE AGGREGATE, WATER ETC., TO SITE AND MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS MACHINE MIXING, LIFTING ( MANNUAL), LAYING CONCRETE, CURING ETC.,COMPLETE AND PROVIDING CENTERING USING CASURINA BALLIES, BAMBOOS, WOODEN REAPERS, RUNNERS, WOOD POSTS, WALL PLATES, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66M BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK (APSS NO.403) FOR SUNSHADES OF 50MM (2") AVERAGE THICK INCLUDING DRIP COURSE OF SIZE 40MM WIDE X 20MM HEIGHT IN CEMENT MORTAR (1:4)PROP -GROUND FLOOR
5.6
-
978.3
ORNAMENTAL PLASTERING TO CEILING 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:5) PROP. AND FINISH COAT OF 4MM THICK IN CM (1:3) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, LIFTING ( MANNUAL), CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE. GROUND FLOOR FOR FINISHED ITEM OF WORK (APSS NO: 901 & 904)
120
-
492.3
PROVIDING IMPERVIOUS COAT TO EXPOSED RCC ROOF SLAB SURFACE WITH CM(1:3), 20MM THICK WITH 1KG OF WATER PROOF COMPOUND PER BAG OF CEMENT LAID OVER ROOF WHEN IT IS GREEN , INCLUDING CONVEYANCE CHARGES OF MATERIALS AND INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES FOR MIXING MORTAR, LAYING, RENDERING SMOOTH AND THREAD LINING, CURING, ROUNDING OFF JUNCTIONS OF WALL AND SLAB ETC,, COMPLETE FOR FINISHED ITEM OF WORK (APSS.NO: 901&903) GROUND FLOOR FOR FINISHED ITEM OF WORK .
120
-
545.4
PLASTERING TO SUPERSTRUCTURE 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, Lifting ( Mannual),CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK GROUND FLOOR (APSS NO: 901&904)
436
-
474
Providing dodooing to internal walls with glazed red or white full body porcelain wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs I st quality, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete , etc., complete for finished item of work for Ground floor
55
-
888.5
FLOORING WITH DOUBLE CHARGED/MULTI CHARGED STAIN FRESS FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600X600 MM AND THICNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO 3711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR
100
-
1184.8
PROVIDING SKIRTING TO INTERNAL WALLS TO 15 CM HEIGHT/RISERS OF STEPS WITH Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm THICK NORMAL COLOUR 1ST QUALITY LENGTH EQUAL TO FLOORING STONES, SET OVER BASE COAT OF CM (1:5) 12 MM THICK WITH CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD AT THE RATE OF 3.30 KGS PER SQM AND JOINTED WITH WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO FULL DEPTH, INCLUDING COST OF ALL MATERIALS LIKE TILES, CEMENT, SAND AND WATER LIFTING ( MANNUAL), ETC., COMPLETE , ETC., COMPLETE FOR FINISHED ITEM OF WORK.GROUND FLOOR
13
-
1171.9
FLOORING WITH CERAMIC NON SKID TILES 7.3MM THICK 1ST QUALITY OF ALL SHADES, STANDARD MAKE AS SPECIFIED OF NOT LESS THAN 300X300MM OF APPROVED PATTERN FOR FLOORING SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES, LIFTING ( MANNUAL, I ETC., COMPLETE FOR FINISHED ITEM OF WORK, GROUND FLOOR (APSS.NO:701&707). FOR BATH AND WCS
10
-
862.5
Flooring with high polished granite slabs 16 to 18mm thick upto 8'-00"(2.43m) OTHER THAN BLACK PREMIUM colour set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, , labour charges for dressing of tiles etc., complete for finished item of work, GROUND FLOOR
13.5
-
4659.5
Full Rounding the edges of Marble/Granitestone slabs of all thicknesses including polishing the same Cost and conveyance of all materials to site labour charges etc., complete finished item of work
33
-
545.4
PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.
200
-
210.8
PAINTING TO NEW WALLS WITH 3COATS OF PLASTIC EMULSION PAINT INCLUDING ONE COAT OF CEMENT PRIMER OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS. (APSS NO. 911)
200
-
178.9
PAINTING TO NEW WALLS WITH 2 COATS OF READY MIXED OIL BOUND WAHSABLE DISTEMPER OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS FOR ALL FLOORS
360
-
120.1
PAINTING WITH EXTERIOR EMULSION PAINT OF APPROVED MAKE(ACE FROM ASIAN PAINT) AND COLOUR TO THE EXTERIOR FACES OF WALLS 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION Etc., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS (APSS NO: 908)
262
-
225.9
PAINTING TO NEW WOOD WORK TWO COATS OVER ONE COAT OF WOOD PRIMER WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES INCLUDING PUTTY AND ALL INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE (THE RATE INCLUDES ONE COAT OF PRIMER AND TWO COATS OF PAINT) (APSS NO.1201, 1207, 1212).FOR FINISHED ITEM OF WORK
20
-
194.8
PAINTING TO NEW IRON WORK TWO COATS OVER ONE COAT OF RED OXIDE PRIMER COAT WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES INCLUDING PUTTY, ALL INCIDENTAL, OPERATIONAL CHARGES ETC., COMPLETE (THE RATE INCLUDES ONE COAT OF PRIMER AND TWO COATS OF PAINT ) (APSS NO.1201, 1207, 1212).FOR FINISHED ITEM OF WORK
20
-
182.9
Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification.
50
-
1032
PROVIDING HYSD/ TMT STEEL BARS ( Fe 500 GRADE AS PER IS 1786 - 1979) OF DIFFERENT DIAMETERS FOR RCC WORKS, INCLUDING LABOUR CHARGES FOR STRAIGHTENING, CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING IN POSITION WITH COVER BLOCKS OF MATERIALS AND SIZE AND TYING AND LAP SPLICING WITH BINDING WIRE OF 18 SWG, FORMING GRILLS FOR REINFORCEMENT WORK AS PER APPROVED DESIGNS AND DRAWINGS TO BE SUPPLIED AT THE TIME OF EXECUTION OF WORK, INCLUDING COST AND CONVEYANCE OF STEEL BARS, BINDING WIRE, COVER BLOCKS AND ALL WASTAGES SUCH AS OVER LAPS, COUPLINGS, CHAIRS, SPACE BARS ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS CUTTING, BENDING, PLACING IN POSITION, TYING INCLUDING SALES AND OTHER TAXES ON ALL MATERIALS ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ALL LENGTHS AS PER DRAWINGS AND TECHNICAL SPECIFICATIONS FOR BARS OF DIFFERENT DIAMETERS INCLUDING OVER LAPS AND WASTAGE WITH LAP SPLICING FOR ALL FLOORS (APSS NO.126)
8
-
63993.7
SUPPLYING AND LAYING RAIN WATER DOWN TAKE PIPES WITH 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
25
-
312.3
SUPPLYING AND FIXING MS GRILLS FORWINDOWS/VENTILATORS OF ALL SIZES AS DIRECTED BY THE ENGINEER-IN- CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES FOR FABRICATION, FIXING ETC., COMPLETE FOR THE FINISHED ITEM OF WORK M.S.FLATS OF ALL SIZES
100
-
95.8
PLAIN CEMENT CONCRETE (1:4:8) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, CENTERING, MACHINE MIXING, Lifting (Mannual),LAYING, ,CURING, FINISHING, INCLUDING ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR DUMMY COLUMNS (APSS NO: 402).
3
-
8281.9
DOOR: 1.05X2.10 SUPPLING POSITIONING AND FIXING OF BIS MARK, STANDARD MAKE PRE POLISHED FLUSH DOOR SHUTTER OF 35MM MADE UP OF THICK SOLID WOOD INFILL CORE WITH NATURAL TEAK VENEER ON ONE SIDE AND COMMERCIAL PLY ON OTHER SIDE OF SPECIFIED COLOUR, SHADE, FINISH AS APPROVED BY ENGINEER - IN - CHARGE AND INTERNAL TEAK LIPPING ALROUND, INCLUDING SUPPLYING AND FIXING OF PRE POLISHED MEDIUM QUALITY KILN SEASONED SOLID AFRICAN TEAK WOOD FRAME (WITH OUT THRESHOLD) OF SECTION 100MMX62MM, WHICK SHOULD BE FIXED TO WALL ON BOTH SIDES WITH ANCHOR FASTENRS OF SIZE 10X100MM. 3NOS ON EITHER SIDE OF WALL AND GAP BETWEEN WALL AND FRAME SHOULD BE FILLED WITH Poly-Urethane (PU) Foam (GAP, SHOULD NOT MORE THAN 10MM) AND ARCHITRAVES OF 40X10MM AND 20X10MM WILL BE NAILED ON THE FRAME, INCLUDING 3NOS OF SSPC HINGES OF SIZE 125MM LONG, 1NO 200MM LONG SS TOWER BOLT. 1NO OF DOORSET MORTICE LEVER LOCK (KY) SC FINISH & 1NO.DOOR STOPPER. POLISHING SHALL BE DONE WITH Poly-Urethane (PU) ON ONE SIDE AND PIGMENTED Poly-Urethane (PU) GLOSSY/MATT FINISH TO THE WOOD WORKS DULY CLEANING THE SURFACE AND APPLYING EMERY PAPER, SAND THE WOOD WITH 180 NOS, EMERY PAPER AND THEN WITH 320NO., EMERY PAPER, CLEAN & WIPE OFF LOOSE DUST, APPLYING SUITABLE KNIFING PASTE FILLER/WOOD FILLER BY PUTTY KNIFE/MUSLIN PAD, AIR DRY FOR 2-3 HOURS, SAND WITH 180 AND 320NO., EMERY PAPER, APPLY TWO COMPONENT WOOD SEALER, AIRE DRY FOR 24HOURS, SAND WITH 320NO., EMERY PAPER, APPLY ONE COAT OF APPROVED SPRAYING THINNER (FOR SPRAYING)/APPLYING ONE COAT OF APPROVED BRUSHING THINNER OR GENERAL PURPOSE THINNER (FOR BRUSHING) AND APPLY (EITHER WITH SPRAY OR BRUSH) TWO COATS OF APPROVED BRAND MELAMINE OF SHADE AS APPROVED BY THE ENGINEER IN CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, EMERY PAPERS, COST OF THINNER & MELAMINE POLISH OF APPROVED BRANDS SUCH AS JENSON & NICHOLSON, ASAIN PAINTS, BERGER PAINTS OR EQUIVALENT ETC AS APPROVED BY THE ENGINEER IN CHARGE. FIXING SHALL BE DONE WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIAL TO SITE, LABOUR CHARGES FOR FIXING FRAME AND SHUTTER ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER - IN - CHARGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF DOORSET SC OR SS, BIS MARK & GOT APPROVED BY THE ENGINEER - IN - CHARGE)
NOTE: NECESSARY REUSABLE TEMPLATES OF STEEL SHALL BE FIXED TO THE OPENING BEFORE PROCEEDING TO BRICK WORK, SO AS TO MAINTAIN CORRECT SIZES.
5.7
-
7616.7
DOOR: 0.85X2.10 SUPPLING POSITIONING AND FIXING OF BIS MARK, STANDARD MAKE PRE POLISHED FLUSH DOOR SHUTTER OF 35MM MADE UP OF THICK SOLID WOOD INFILL CORE WITH NATURAL TEAK VENEER ON ONE SIDE AND COMMERCIAL PLY ON OTHER SIDE OF SPECIFIED COLOUR, SHADE, FINISH AS APPROVED BY ENGINEER - IN - CHARGE AND INTERNAL TEAK LIPPING ALROUND, INCLUDING SUPPLYING AND FIXING OF PRE POLISHED MEDIUM QUALITY KILN SEASONED SOLID RED MERANTI HARD WOOD FRAME (WITH OUT THRESHOLD) OF SECTION 100MMX62MM, WHICK SHOULD BE FIXED TO WALL ON BOTH SIDES WITH ANCHOR FASTENRS OF SIZE 10X100MM. 3NOS ON EITHER SIDE OF WALL AND GAP BETWEEN WALL AND FRAME SHOULD BE FILLED WITH Poly-Urethane (PU) Foam (GAP, SHOULD NOT MORE THAN 10MM) AND ARCHITRAVES OF 40X10MM AND 20X10MM WILL BE NAILED ON THE FRAME, INCLUDING 3NOS OF SSPC HINGES OF SIZE 125MM LONG, 1NO 200MM LONG SS TOWER BOLT. 2NOS SS DOOR HANDLES OF 125MM LONG & 1NO SS ALROP OF 250MM LONG. POLISHING SHALL BE DONE WITH Poly-Urethane (PU) ON ONE SIDE AND PIGMENTED Poly-Urethane (PU) GLOSSY/MATT FINISH TO THE WOOD WORKS DULY CLEANING THE SURFACE AND APPLYING EMERY PAPER, SAND THE WOOD WITH 180 NOS, EMERY PAPER AND THEN WITH 320NO., EMERY PAPER, CLEAN & WIPE OFF LOOSE DUST, APPLYING SUITABLE KNIFING PASTE FILLER/WOOD FILLER BY PUTTY KNIFE/MUSLIN PAD, AIR DRY FOR 2-3 HOURS, SAND WITH 180 AND 320NO., EMERY PAPER, APPLY TWO COMPONENT WOOD SEALER, AIRE DRY FOR 24HOURS, SAND WITH 320NO., EMERY PAPER, APPLY ONE COAT OF APPROVED SPRAYING THINNER FOR SPRAYING)/APPLYING ONE COAT OF APPROVED BRUSHING THINNER OR GENERAL PURPOSE THINNER (FOR BRUSHING) AND APPLY (EITHER WITH SPRAY OR BRUSH) TWO COATS OF APPROVED BRAND MELAMINE OF SHADE AS APPROVED BY THE ENGINEER IN CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, EMERY PAPERS, COST OF THINNER & MELAMINE POLISH OF APPROVED BRANDS SUCH AS JENSON & NICHOLSON, ASAIN PAINTS, BERGER PAINTS OR EQUIVALENT ETC AS APPROVED BY THE ENGINEER IN CHARGE. FIXING SHALL BE DONE WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIAL TO SITE, LABOUR CHARGES FOR FIXING FRAME AND SHUTTER ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER - IN - CHARGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF DOORSET SC OR SS, BIS MARK & GOT APPROVED BY THE ENGINEER - IN - CHARGE) NOTE: NECESSARY REUSABLE TEMPLATES OF STEEL SHALL BE FIXED TO THE OPENING BEFORE PROCEEDING TO BRICK WORK, SO AS TO MAINTAIN CORRECT SIZES.
6.3
-
7286.3
SupplyingandfixingofUnplasticisedPolyVinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforcedprofiles(Compositionofprofileshall consists a minimum of 5.5 PHR of TiO2 and not morethan12PHRofCaCo3forevery100parts of PVCresin)of(94mmx45mm)/(80mmx52mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced withhot dip galvanized up to 50 microns of minimum thickness of1.0/1.2mm prefabricated &welded through fusion welding. The windows as shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm) /(52mmx21.5mm) x2.0mm fittedwithVinylCoatedFibremesh-onrollers/ pulley duly fixed withGreycolourTPVGasketforsash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single pointlocking withTouchLockandthesystemis to be installedatthesiteusinganchorfasteners,siliconrubbersealant,easyglazing/deglazingat site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
12
-
7600.8
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of
60 mm x 60 mm x 2.60 mm for frames and the
mullion sections are of 60 mm x 82 mm x 2.60
mm frames are structurally reinforced with hot
dip galvanized up to 50 microns of size 35 mm x
28 mm of thickness 1.5 mm the sash shall be
fitted with 5 mm thick clear float glass ofreputed
make duly fixed with EPDM weathering seal
resistant and glazing bead 34.5 mm x 18 mm
including cost and conveyance of all materials,
accessories, labour charges for transportation,
erection at site with templates for casement
sizing complete for finished item ofwork
3.6
-
5027.46
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outerframe having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site complete for finished item of work.
1.8
-
6839.62
MANUFACTURING, SUPPLYING AND FIXING IN POSITION OF STAIRCASE RAILING AS PER DRAWING USING STAINLESS STEEL TUBES, SECTIONS, PLATES, SHEETS & PIPES OF ALL DIAMETERS FOR - 304 GRADE INCLUDING LABOUR CHARGES FOR FABRICATION OF STAINLESS STEEL RAILING WORKS USING STAINLESS STEEL WELDING RODS INCLUDING BUFFING, POLISHING, LACQUER FINISHING, TO PRESENT SEAMLESS FINISH ETC., COMPLETE AS DIRECTED BY THE ENGINEER IN CHARGE FOR FINISHED ITEM OF WORK.
19.5
-
648.3
SUPPLY AND FIXING OF 15.90MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
15
-
146.6
SUPPLY AND FIXING OF 22.20MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
50
-
167
SUPPLY AND FIXING OF 28.60MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
-
220.4
SUPPLYING AND FIXING GUN METAL GATE (GM PEET) VALVE AS PER IS -778 CLASS-1 INDIAN MAKE HEAVY TYPE OF 25 MM NB SIZE 1st QUALITY, WITH ALL NECESSARY FITTINGS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
5
-
1288.2
SUPPLYING AND FIXING 76.2MM (3") DIA UV RESISTANT UPVC SWR NAHANI TRAP WITH JALI OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
3
-
114.8
SUPPLYING AND FIXING OF 150MMX100MM SWG GULLY TRAP CONFIRMING TO ISI 651 & 4127 WITH CI GRATING AND CONSTRUCTION OF BRICK MASONRY INTERMEDIATE CHAMBER OF SIZE 20"X14"X12" IN CM (1:6) OVER CC (1:5:10) PROP. BED OF SIZE 20"X14"X4" AND PLASTERING WITH 12MM THICK IN CM (1:4) PROP. BOTH INSIDE AND OUTSIDE SURFACES AND FITTED WITH 9"X12" (230X305MM) RCC (1:11/2:3) 1 1/2" THICK COVER INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
5
-
601.1
SUPPLYING, LAYING, JOINTING AND TESTING OF 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
462.5
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
-
312.3
SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.FOR GROUND FLOOR
20
-
222.9
SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.
3
-
3728.4
SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 300GRAMS SEICO/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS INCLUDING WOODEN BLOCK AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.
5
-
1774.4
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
94.3
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR PLAIN BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
56.8
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
121.6
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR DOOR BEND 87.5 DEGREES AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
76.1
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
5
-
21.6
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR COWL AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
2
-
15.9
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE TEE (WITH DOOR) AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
146.6
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE TEE (WITH DOOR) AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
81.8
SUPPLYING AND FIXING 110 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y" AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
153.4
SUPPLYING AND FIXING 75 MM DIA UV RESISTANT UPVC SWR SINGLE 'Y" AS PER ISI STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
82.9
SUPPLYING AND FIXING BEST INDIAN MAKE 609.6X457.2mm T.V SHAPE MIRROR WITH PLASTIC FRAME MIRROR INCLUDING WOODEN BLOCKS, SCREWS ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
5
-
558.1
SUPPLYING AND FIXING 19.04 MM DIA, 609.60 MM LONG ALUMINUM ANODISED TOWEL ROD WITH BRACKETS AND SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
5
-
157.7
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6 ,SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 x 375 x 390 mm INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE
2
-
3443.4
SUPPLYING AND FIXING NP SOAP DISH HEAVY TYPE WITH NP SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
5
-
278.8
15mm brass Bib Tap cp finish - Indian make heavy dutyfull turn300gms NCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., FOR FINISHED ITEM OF WORK COMPLETE.
10
-
266.5
SUPPLY AND FIXING OF 22.20MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
10
-
167
SUPPLY AND FIXING OF 28.60MM OD PIPE - SDR 13.5 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
110
-
220.4
PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) . DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE
1000
-
8
SUPPLYING, LAYING, JOINTING AND TESTING OF 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
20
-
462.5
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
15
-
312.3
SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF6Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.
30
-
441.1
CONSTRUCTING 914.40 MM ( 3'-0") DIA FLY ASH BRICK MASONARY MAN HOLE AS PER IS-4111:PART-1:1996 WITH CM (1:6) PROP. USING 2ND CLASS BRICKS OF 225MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 5N/SQ.MM INCLUDING PLASTERING WIH CM(1:3) PROP. 12 MM THICK BOTH INSIDE AND OUTSIDE, FITTED WITH 20'' DIA RCC COVERS AND FRAMES, INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.
4
-
8379.1
Supply and Fixing of 25mm outer dia Heavy grade, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes: Sudhakar / Modi/ precision (ISI mark).
100
-
83.17
Supply and fixing of 25mm outer dia Heavy grade, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories [like 'U' nails, Junction box, PVC Bends and Cement] including masonary work for light, fan, common, separate plug point and switch/power boards etc., including all labour charges etc., complete. Makes: Sudhakar / Modi/ precision (ISI mark).
100
-
101.25
Supply and Fixing of 25mm outer dia Heavy grade, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) concealed in underneeth the floor with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi/ Precision ( ISI mark).
30
-
69.36
Supply and Fixing of 25mm outer dia Heavy grade, FRLS with IS: 9537 part 3 regid PVC pipe (ISI mark) surface laying on false ceiling duly fixing with G.I. Wire on existing supported studs including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi / Precision ( ISI mark).
100
-
72.2
Supply and Fixing of 25mm outer dia Heavy grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar/ Modi / Precision ( ISI mark).
50
-
92.41
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with suitable Module Hot Dip Galvanized modular type Metal Box covered with suitable Modular Cover Frame, with 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Copper wire make: Finolex / RR kabel / Polycab (HR_FR-LF).
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor /Schneider Zen celo / Honeywell Blenge Plus. Ceiling Rose Make: Gold Medal Olive / Million Zoom / Anchor Penta Cherry.
23
-
726
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with suitable Module Hot Dip Galvanized modular type Metal Box covered with suitable Modular Cover Frame, without 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Copper wire make: Finolex / RR kabel / Polycab (HR_FR-LF).
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor /Schneider Zen celo / Honeywell Blenge Plus.
20
-
704.41
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS/HFFR PVC insulated 1100V grade as per IS: 694/1990 specification for Copper cable in existing pipe without Ceiling Rose including all labour charges etc., complete for light points in Non-Residential Buildings. [For secondary light points i.e., from existing light point to extended light point ]
Copper wire make: Finolex / RR kabel / Polycab (HR_FR-LF).
11
-
277.6
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with suitable Module Hot Dip Galvanized Modular Metal Box covered with suitable Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
9
-
525.14
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete. [ Power plug ]
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
3
-
723.27
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete. [For 2 socket board - For Raw Power].
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
10
-
1007.31
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete. [For Computer board - For UPS Power].
Modular Switch, Socket, Metal box & Cover frame Make: Legrand Arteor / Schneider Zen celo /Honeywell Blenge Plus.
10
-
1007.31
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges without bulb (for new installation). BH Make: Gold Medal Olive / Million Zoom / Anchor Penta Cherry.
6
-
69.42
Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
450
-
77.71
Supply and run of 1 of 22/0.3mm (1.5 Sqmm)FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
450
-
28.36
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
40
-
117.98
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.
Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
40
-
38.93
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
20
-
325.71
Supply and run of 2 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
20
-
129.52
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.
Makes: Finolex / RR kabel / Polycab (HR_FR-LF).
40
-
59
Supply and fixing of 8 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for single phase 06 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 6 Nos
DB Makes: Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make: Legrand-DX3 / Schneider-Acti9.
1
-
5089.95
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos
DB Makes: Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make: Legrand-DX3 / Schneider-Acti9.
1
-
8750.63
Supply of 48" (1200mm) 5 star rated Sweep Ceiling Fan with all accessories etc., complete.
Makes : Crompton HS Plus / Havells ES NEO / Orient
Energy Star
9
-
2404
Supply of Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete. Makes: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
9
-
648.74
Labour charges for fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
9
-
187.52
Supply of 12" (300mm) Light duty exhaust fan with wire guard etc., complete
Makes: Crompton / Havells Ventilair-DB / Orient hill air.
4
-
1646.72
Labour charges for fixing of Exhaust fan in wall with necessary connections etc., complete (for hole already made available).
4
-
363.91
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 50,000 burning hours with BIS Certification.
LUMINAIRE MAKE: Crompton / Havells.
LED MAKE : CREE / NICHIA / OSRAM.
12
-
829.39
Fixing of 20W LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.
12
-
155.61
Supply and transportation of 45W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete.
LUMINAIRE MAKE: OSRAM / CROMPTON / HAVELLS.
LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.
Model No: LSTP-45-CDL-1 or its equivalent.
1
-
5339.91
Fixing of 45W LED street light luminary on wall with 1.0 Mtr., 40mm Nominal Bore Medium grade G.I.Pipe bracket and anti tilting MS flat etc., 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.
1
-
861.2
Supply and transportation of 18W back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete with 50,000 burning hours with BIS Certification.
LUMINAIRE MAKE : Crompton / Havells / Halonix.
LED MAKE : CREE / NICHIA / OSRAM.
22
-
2226.85
Fixing of LED luminaire 18W Down lights with all necessary accessories in false ceiling / on wall including giving connections and all labour charges etc., complete.
22
-
104.27
Supply and fixing of buzzer with 2 No's of 6A / 10A 1 Module Modular Bell push with Neon Indicator including giving connections, cost of all accessories and labour charges etc., complete.
Buzzer Makes : GM / Million / Gold Medal / Anchor / Great white.
Bell push Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
1
-
434
Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate on 2 moduler hot dip galvanized metal box including giving connections, cost of all accessories and labour charges etc. Complete.
I/O & duel face plate Makes: D Link / AMP / Molex / Legrand / Krone.
Metal box make: Legrand / Schneider.
10
-
505.83
Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete.
Makes: D Link / AMP / Molex / Legrand / Krone.
150
-
35
Supply and fixing of 8 Port manageble switches including giving connections cost of all accessories and all labour charges etc., complete.
Makes: CISCO / Net Gear / HP / D link.
1
-
1337.25
Supply and fixing of 6U floor mounting net work rack with power spike including all accessories and giving all connections, labour charges etc., complete.
Makes: HCL / Vall.
1
-
5241.73
Supply and fixing of Modular socket type Telephone jack with Connector on 2 moduler hot dip galvanized metal box and 2 modular cover frame including giving connections, cost of all accessories and labour charges etc. Complete. Telephone jack with Connector, cover frame & metal box Makes: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
6
-
339.95
Supply and run of 2 Pair, 0.5mm telephone copper wire in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Makes: Finolex / Delton / Surabi / Polycab
80
-
21.54
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
2
-
4131.29
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
80
-
21
Supply and Run of 2 of 10 Sqmm WPTC (Weather Proof Twin Core) ISI Alluminium Wire along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete. Makes : Polycab / Nakoda / V-Guard.
50
-
104.36
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements