Police Housing Corporation Limited Tender

LT Panel Board: Fabrication ,Transportation , Supply, Installation, Testing and Commissioning of suitable size , plinth mounting indoor type LT Distribution panel of 14 guage CRCA sheet for termination of 3.5c x 240 sqmm alluminium cables with the following incorporated in the panel for Distributing the power supply. (The Tenderer should got obtain the shop drawings for Panel board along with Switch gear, Busbar details etc., before going to fabrication of Panel board at factory and should take approval from Head office) Main incoming: 400A FP 35/36 kA MCCB Adjustableconfirms to IS/IEC 60947-2 having breaking capacity 35/36KA with thermal magnetic release panel mounted Makes: Legrand/siemens 680A Alluminium Bus bar (75mmx6mmxSuitable lenght) - 4nos -Main Sleaves tape for bus bar R Y B N-required length Insulators for busbar fixing (panel type)-24 Nos Phase indicator lamps - 1set (L&T / C&S / SALZAR / HPL MAKE) Extended earth terminals - with 40X6 mm G.I Strip -of required length Current Transformer- 630/5A - 3 NosKAPPA make Voltmeter(0-500V)-Digital type with selector switch( conzerv/HPL Make) Ammeter(0-500A)-Digital type with selector switch( conzerv/HPL Make) supply of 6A SP MCBs- 3 Nos of Legrand/siemens make Outgoing : 1)250A, FP,35/36KA MCCB -1 NO Legrand/Siemens make.(Thermal Magnetic release) 2) 63A, FP, 16kA , MCCB -11 Nos. Legrand/Siemens make.(Thermal Magnetic release) The panel Size approx:2.20X1.00X0.35 mtrs the connections of 63A & 250A MCCBs should be done with Bus bar strips) with bottom/TOP entry cables. the above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40mm size etc., complete as directed by the Engineer- in - Charge.

Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Torrent / polycab

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.