Police Housing Corporation Limited Tender

MASONRY work IN PROP WITH AERATED (CELLULAR)AUTOCLAVED CONCRETE BLOCKS REPUTED BRANDS XTRALITE FROM ULTRATECH AEROCON FROM HILL, CONFORMING TO IS:2185(PART-3)-1984AND IS:6441-1972 OF COMPRESSIVE STRENTH 3N/mm2 600X200X230MM AND CHEMICAL JOINTING COMPOUND OF SAME BRAND, INCLUDING COST AND COVEYANCE OF ALL MATERIALS LABOUR CHARGES SEIGNORANG CHARGES SCAFFOLDING AND CURING ETC, COMPLETE FOR GROUND FLOOR.

DADOOING WITH DIGITAL / POLISHED GLAZED FULL BODY PORCELAIN WALL TILES OF SIZE 300 X 600 MM WITH ANY TYPE OF DESIGN TEXTURE SUCH AS MARBLE FINISH, WOODEN, BAMBOO, STONE FINISHES ETC., SCRATCH LESS, STAIN FREE AND THICKNESS BETWEEN 6-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNSAS APPROVED BY EXECUTIVE ENGINEER APPROVED BY EXECUTIVE ENGINEER, SET OVER 12MM THICK CM (1:3) BASE COAT AND NEAT GREY CEMENT SLURRY OF HONEY LIKE CONSISTENCY AT THE RATE OF 3.3 KGS PER SQ.MT AND JOINTED WITH 2 KGS WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO MATCH THE SHADE OF TILES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LIFTING (MANNUAL), ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS MIXING MORTAR, FIXING TILES IN POSITION, INCLUDING LIFT CHARGES, CURING, CUTTING THE BRICK MASONARY WALLS AND REDOING THE SAME SUCH THAT THE TOP SURFACE OF TILES IS TO BE FLUSHED WITH PLASTERED SURFACE ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR.

PAINTING TO NEW WALLS WITH 3COATS OF PLASTIC EMULSION PAINT INCLUDING ONE COAT OF CEMENT PRIMER OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS. (APSS NO. 911)

MOZO LAMINATE FLOORING OF SIZE 1215 X 196 X 8MM OF WOOD TEXTUER EMBOSSED SURFACE INLUDING COST AND CONYANCE OF ALL MATERIAL TO SITE COMPLETE

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.

SUPPLY AND FIXING GYP BOARD SUSPENDED REGULAR SINGLE LAYER FALSE CEILING (GS-MFSC-4.1 AS PER INDIA GYPSUM) USING 12.50 MM THICK GYP BOARD CONFORMING TO IS 2095-1982 FIXING TO GYP STEEL GI PERIMETER CHANNELS OF SIZE 20 X 27 X 30 MM (WEB) OF 0.55 MM THICK ALONG THE PERIMETER OF CEILING SCREW FIXED TO BRICK WORK / PARTITION AT 610 MM C/C AND SUSPENDING THE FRAME WORK USING INTERMEDIATE CHANNELS (45 X 15 X 15 X 0.90 MM) FROM SOFFIT AT 1220 MM C/C WITH CEILING ANGLE (25 X 10 X 0.55 MM) FIXED WITH GI CLEAT AND STEEL EXPANSION FASTENERS & CONNECTING CLIP TO THE CEILING CHANNELS (WITH KNURLED WEB OF 51.50 X 26 X 10.50 X 0.55 MM) FIXED IN DIECTION PERPENDICULAR TO THE INTERMEDIATE CHANNEL AT 457 MM C/C AND FIXING THE 12.50 MM DRYWALL SCEWS AT 230 MM C/C & JOINTING, FIXING USING JOINT COMPOUND AND PAPER TAPE TO HAVE A FLUSH LOOK INCLUDING FILLING THE TAPPERED & SQUARE EDGES WITH JOINTING COMPOUND, TWO COATS OF DRYWALL TOPCOAT COMPLETE FOR FINISHED ITEM OF WORK AS PER INDIA GYPSUM LTD., SPECIFICATION.

PLASTERING WITH CM 2 COATS 20MM THICK , WITH A BASE COAT OF 16 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR (APSS NO: 901&904)

FLOORING WITH NON-SKID RED OR WHITE FULL BODY CERAMIC FLOOR TILES OF SIZE 300 X 300 MM AND THICKNESS BETWEEN 7-8 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS OR AS APPROVED BY THE ENGINEER - IN -CHARGE ,OF APPROVED PATTERN FOR FLOORING SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES, LIFTING ( MANNUAL),, ETC., COMPLETE FOR FINISHED ITEM OF WORK,GROUND FLOOR (APSS.NO:701&707).

MAIN DOOR (DOUBLE SHUTTER) 1.5 X2.1M: SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH MEDIUM TEAK WOOD SCANTLINGS OF SIZE 150 MM X 100 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 8 NOS. OF 125 MM BUTT HINGES, 2 NOS. DOOR STOPERS, 4 NOS. 150 MM LONG DOOR HANDLES, 2 NOS. ALDROP OF SIZE 300 MM LONG, 3 NOS. OF 250 MM LONG TOWER BOLTS WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

FLUSH DOOR FOR TOILET (0.75x2.10): SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING DOOR FRAME MADE WITH SEASONED SAL WOOD SCANTLINGS OF SIZE 100 MM X 75 MM, INCLUDING 6 NOS. OF MS HOLD FASTS OF SIZE 250X50X8 MM, 4 NOS. OF 125 MM BUTT HINGES, 2 NOS. 125 MM LONG DOOR HANDLE, 1 NO. ALDROP OF SIZE 250 MM LONG, 2 NOS. OF 200 MM LONG TOWER BOLTS, INCLUDING PROVIDING KICK PLATE WITH 24 GUAGE ALUMINIUM SHEET UP TO 230 MM HEIGHT ON FRONT FACE & FULL HEIGHT ON REAR FACE INCLUDING BOTTOM EDGE OF THE SHUTTER WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).

SUPPLYING AND FIXING OF UNPLASTICISED POLY VINYL CHLORIDE (UPVC) 3 TRACK SLIDING WINDOWS WITH MESH SHUTTER – (2-GLASS SHUTTERS AND 1-MESH SHUTTER) DULY MANUFACTURED USING UPVC REINFORCED PROFILES (COMPOSITION OF PROFILE SHALL CONSISTS A MINIMUM OF 5.5 PHR OF TIO2 AND NOT MORE THAN 12 PHR OF CACO3 FOR EVERY 100 PARTS OF PVC RESIN) OF (94 MM X 45 MM)/(80 MM X 52 MM) X 2.20 MM FOR OUTER FRAMES, (58 MM X 39 MM)/(54 MM X 38 MM) X 2.20 MM FOR SLIDING SHUTTER FRAMES CAPABLE OF MOUNTING SINGLE GLAZING SYSTEM STRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIMUM THICKNESS OF 1.0/1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING. THE WINDOW SASH SHALL BE FITTED WITH 5 MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE AND MESH SHUTTER FRAME SHALL BE (42 MM X 25 MM)/(52 MM X 21.5 MM) X 2.0 MM FITTED WITH VINYL COATED FIBER MESH- ON ROLLERS/ PULLEY DULY FIXED WITH GREY COLOUR TPV GASKET FOR SASH & GLAZING BEAD SHALL BE CO-EXTRUDED WITH GREY COLOUR SOFT PVC. SYSTEM SHALL HAVE SINGLE POINT LOCKING WITH TOUCH LOCK AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING OF UNPLASTICISED POLY VINYL CHLORIDE (UPVC) OPENABLE DOORS WITH OPENABLE SHUTTERS DULY MANUFACTURED USING UPVC REINFORCED PROFILES (COMPOSITION OF PROFILE SHALL CONSISTS A MINIMUM OF 5.5 PHR OF TIO2 AND NOT MORE THAN 12 PHR OF CACO3 FOR EVERY 100 PARTS OF PVC RESIN) OF (60 MM X 55MM X 2.4 MM) FOR OUTER FRAMES 74MM X 60 MM X 2.4 MM FOR MULLION SECTIONS AS ER THE NEED AND 102MM X 60 MM X 2.4 MM FOR OPENABLE SHUTTER FRAME CAPBLE OF OF MOUNTING SINGLE GLAZING SYSTEM, STRUCTURALLY REINFORCED WITH HOT DIP GALVANIZED UP TO 50 MICRONS OF MINIMUM THICKNESS OF 1.2 MM PREFABRICATED & WELDED THROUGH FUSION WELDING. THE WINDOW SASH SHALL BE FITTED WITH 5 MM THICK CLEAR FLOAT GLASS OF REPUTED MAKE DULY FIXED WITH GREY COLOUR TPV GASKET FOR SASH & GLAZING BEAD SHALL BE CO - EXTRUDED WITH GREY COLOUR SOFT PVC. SYSTEM SHALL HAVE SINGLE POINT LOCKING WITH TOUCH LOCK AND THE SYSTEM IS TO BE INSTALLED AT THE SITE USING ANCHOR FASTENERS, SILICON RUBBER SEALANT, EASY GLAZING/ DEGLAZING AT SITE ETC., INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, ACCESSORIES, LABOUR CHARGES FOR TRANSPORTATION, ERECTION AT SITE COMPLETE FOR FINISHED ITEM OF WORK

S&F OF 15 MM BRASS BODY PREMIUM VARIETY CHROMIUM PLATED FINISH SINGLE LEVER PILLAR COCK WITH AREATOR OF NOT LESS THAN 500 GRAMS WEIGHT QUARTER TURN SPINDLE CONFORMING TO IS 8931 AND WITH A WARRANTY OF 10 YEARS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. (TBSP-F.II-05)

S&F OF CHROMIUM PLATED FINISHBRASS BODY QUATER TURN BIBCOCK CUM HEALTH FAUCET WITH 1M LONG TUBE AND WALL HOOK WITH 10 YEARS WARRANTY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. (TBSP-F.I-07)

SUPPLY, INSTALLATION AND COMMISSIONING APPROVED MAKE FLOOR MOUNTED CLOSE COUPLED WASH DOWN EWC CONFORMING TO IS:2556 (PART 8)-2004 WITH 'P' OR 'S' TRAP WITH DUAL FLUSH PORCELAIN CISTERN FIXED ON WASH DOWN EWC WITH ALL INTERNAL PARTS OF DUAL FLUSH CISTERN, ULTRA SOLID SEAT COVER OF APPROVED MAKE WITH RUBBER BUFFER AND CAP & 15 MM ANGLE STOP COCK & 450 MM LONG PVC INTER CONNECTION PIPE WALL FLANGES ALL OF APPROVED MAKE ETC. COMPLETE FOR FINISHED ITEM OF WORK IN ALL RESPECTS: SPECIAL COLOUR - GRADE - III

SUPPLYING & FIXING INDIAN MAKE WHITE GLAZED VITREOUS CHINA PORCELAIN SINK CONFORMING TO IS:2556-PART-51994 ON CANTILEVER BRACKETS WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32 MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFORMING TO IS:2963-1979 : 750 X 450 X 250

PROVIDING WALL PANELLING UP TO THE HEIGHT OF FALSE CEILING BY USING 19MM THICK BWR/ BWP GRADE PLY WOOD OF 63.5MM X 38MM (2.5" X 1.5") FIXED AT A DISTANCE OF EVERY 6900MM X 600MM VERTICALLY AND HORIZONTALLY TO THE WALL WITH NECESSARY RAWL PLUGH AND SCREWS FIXING OF FIBRE GLASS FOAM OF 50MM THICKNESS WITH A DINSITY 24KG/ CUMTR SUPPORTED WITH GALVAISED CHICKEN WIRE MESH NETTING FOR INSULATION BY MAINTAINING AN AIR GAP OF 50MM ALONG WITH THE WALL AND FIXING OF 12MM THICK BWR/ BWP GRADE PLY WOOD OVER THE FRAME AND FIXING OF 1MM THICK MAT FINISH LAMINATE (DECOLAM) OF CHOICE COLOUR OVER THE PLY WOOD BY FEVICOL WITH A 2MM GROOVE AT EVERY 600MM VERTICALLY INCLUDING COST AND CONVEYANCE OF MATERIALS LABOUR CHARGES ETC., COMPLETE FOR THE FINISHED ITEM OF WORK

SUPPLY AND FIXING OF 25MM OUTER DIA HEAVY GRADE, FRLS WITH IS:9537 PART 3 REGID PVC PIPE (ISI MARK) SURFACE WITH ALL ACCESSORIES FIXING ON CHROMIUM PLATED METALLIC BASE SADDLES INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR RUN OF MAINS. MAKES : SUDHAKAR / MODI ( ISI MARK).

WIRING WITH 2 RUNS OF 14/0.3MM (1.0 SQMM) FRLS/HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE WITH 6A / 10A 1 WAY 1 MODULE MODULAR SWITCH CONTROL WITH SUITABLE SIZE HOT DIP GALVANIZED MODULAR TYPE METAL BOX COVERED WITH SUITABLE MODULAR COVER FRAME, WITH 3 PLATE JUMBO CEILING ROSE INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR LIGHT, BELL, FAN AND EXHAUST FAN POINTS IN NON-RESIDENTIAL BUILDINGS. COPPER WIRE MAKE: POLYCAB/RPG/NAKODA/POWER FLEX. MODULAR SWITCH, SOCKET, METAL BOX & COVER FRAME MAKE: LEGRAND ARTEOR/SCHEINDER ZEN CELO/HONEY WELL BLENGE PLUS. CEILING ROSE MAKE: ANCHOR / GOLD MEDAL OLIVE / MILLION ZOOM.

SUPPLY AND FIXING OF 6A / 10A 3/2 PIN 2 MODULE MODULAR SOCKET WITH SHUTTER WITH 6A / 10A 1 WAY 1 MODULE MODULAR SWITCH CONTROL ON A COMMON SWITCH BOARD WITH SUITABLE SIZE HOT DIP GALVANIZED MODULAR METAL BOX COVERED WITH SUITABLE SIZE MODULAR COVER FRAME WITH EARTH CONTINUITY INCLUDING WIRE LEADS, EARTH CONNECTIONS ALONG WITH ALL LABOUR CHARGES ETC., COMPLETE. MODULAR SWITCH, SOCKET, METAL BOX & COVER FRAME MAKE: LEGRAND ARTEOR / SCHNEIDER ZEN CELO /HONEYWELL BLENGE PLUS.

SUPPLY AND FIXING OF 20A 2 MODULE MODULAR SOCKET WITH SHUTTER AND 16A / 20A 1 WAY 1 MODULE MODULAR SWITCH DULY RECESSED IN WALL WITH 3 MODULE HOT DIP GALVANIZED MODULAR METAL BOX SIZE COVERED WITH 3 MODULAR COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE.[POWER PLUG] MODULAR SWITCH,SOCKET,METAL BOX & COVER FRAME MAKE: LEGRAND ARTEOR/SCHEINDER ZEN CELO/ HONEY WELL BLENGE PLUS.

SUPPLY AND RUN OF 2 OF 36/0.3MM (2.5 SQMM) FRLS / HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES: POLYCAB / RPG / NAKODA / POWER FLEX.

SUPPLY AND RUN OF 1 OF 14/0.3MM (1.0 SQMM) FRLS/HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR EARTH CONTINUITY INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES: POLYCAB / RPG / NAKODA / POWER FLEX.

SUPPLY AND RUN OF 2 OF 56/0.3MM (4.0 SQMM) FRLS / HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES: POLYCAB / RPG / NAKODA / POWER FLEX.

SUPPLY AND RUN OF 1 OF 36/0.3MM (2.5 SQMM) FRLS/HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR EARTH CONTINUITY INLCUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES: POLYCAB / RPG / NAKODA / POWER FLEX.

SUPPLY AND TRANSPORTATION OF 18W BACK LIT LED DOWN LIGHT RECESSED / SURFACE MOUNTING ROUND/ SQUARE WITH HOUSING MADE OF POWDER COATED PRESSURE DIE CAST ALUMINIUM HOUSING WITH EXTENDED HEAT SINK, WITH PROTRUDED HIGH EFFICIENCY DIFFUSER, IP20, WITH WIDE OPERATING VOLTAGE RANGE, POWER FACTOR 0.9, SURGE PROTECTION: 2KV, SYSTEM EFFICACY OF 100 LUMENS/WATT, CCT: 3000K - 6500K AS DESIRED BY THE DEPARTMENT AND AS PER IS, CRI 80, AND THD IS LESS THAN 15% ETC., COMPLETE. LUMINAIRE MAKE : CROMPTON / GE VENTURE LED MAKE : CREE /NICHIA / OSRAM . MODEL NO: LSDN-18-CDL/TL/WW LED DOWNLIGHTER WITH ALLUMINIUM HOUSING

FIXING OF LED LUMINAIRE 18W DOWN LIGHTS WITH ALL NECESSARY ACCESSORIES IN FALSE CEILING / ON WALL INCLUDING GIVING CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE.

INVERTER MODEL COOLTYPE SPLIT AC 1.8 TR SUPPLY OF INVERTER MODEL COOL TYPE SPLIT AC UNIT WITH HIGH WALL MOUNTED SINGLE SPLIT INDOOR UNIT AND OUTDOOR CONDENCING UNIT HERMETICALLY SEALED COMPRESSOR SUITABLE FOR OPERATION ON 230V,50HZ, 1PHASE AC SUPPLY CAPABLE OF PERFORMING HEAT COOL DEHUMIDIFYING AIR CIRCULATING AND FILTERING WITH COOLING AND CONDENSING UNITS WITH 3.5 MTS OF COPPER PIPING, INSULATION KIT AND 4 MTS OF 4 CORE COPPER FLEXIBLE CHORD (VOLTAGE RANGE 160- 264 VOLTS) AND CORDLESS REMOTE CONTROL 1.8 TR 4 STAR CAPABLE OF DELIVERING 21600 BTU/HR AND ABOVE WITH OPERATING ON REFRIGERANT R-32 / R-410 MAKES : O GENERAL / DAIKIN / TOSHIBHA

SUPPLY, FABRICATION OF 1SET MS BRACKET SUITABLE FOR FIXING OUT DOOR UNIT OF SPLIT AC UNIT.

INSTALLATION OF SPLIT AIR CONDITIONERS.(INDOOR UNIT AND OUT DOOR UNIT)