Police Housing Corporation Limited Tender

RANDAM RUBBLE MASONRY USING HARD GRANITE STONE IN CM(1:6) PROP. INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNORAGE CHARGES,LABOUR CHARGES, CURING, ETC., COMPLETE FOR FOUNDATIONS AND BASEMENTS FOR FINISHED ITEM OF WORK. APSS NO: 615).

SUPPLY AND PLACING OF M20 CORRESPONDING TO IS 456 ETC., TO SITE AND INCLUDING SEIGNIORAGE CHARGES, SALES & OTHER TAXES ON ALL MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LAYING CONCRETE, CURING ETC.,COMPLETE INCLUDING CENTERING WITH STEEL PLATES ,SHUTTERING,VIBRATING,CURING ETC COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK FOR FINISHED ITEM OF WORK. (APSS NO. 402)-FOR PLINTH BEAMS.

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SEINIORAGE CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).

MASONRY WORK IN CM (1:4) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 100 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SEINIORAGE CHARGES, SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 100 MM THICK GROUND FLOOR (APSS NO. 501&504).

PLAIN CEMENT CONCRETE (1:3:6) PROP. USING 20MM GRADED HARD GRANITE MACHINE CRUSHED METAL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, SEIGNIORAGE, CENTERING, MACHINE MIXING, LAYING, CURING,LIFT CHARGES(MANUAL) FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. BED BLOCKS IN GROUND FLOOR (APSS NO: 402).

PLASTERING TO SUPERSTRUCTURE 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, Lifting ( Mannual),CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK (APSS NO: 901&904) - GROUND FLOOR

FLOORING WITH CERAMIC TILES 7.3 MM THICK, SET OVER BASE COAT OF CM (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS TO SITE, SEIGNIORAGE CHARGES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK GROUND FLOOR.

DADOOING WITH DECORATED COLOURED BACKGROUND GLAZED WALL TILES OF ANY SIZE AND OF 5 TO 7 MM THICK AS PER APPROVED MAKE, DESIGN AND PATTERN AS APPROVED BY EXECUTIVE ENGINEER APPROVED BY EXECUTIVE ENGINEER, SET OVER 12MM THICK CM (1:3) BASE COAT AND NEAT GREY CEMENT SLURRY OF HONEY LIKE CONSISTENCY AT THE RATE OF 3.3 KGS PER SQ.MT AND JOINTED WITH 2 KGS WHITE CEMENT PASTE MIXED WITH PIGMENT OF MATCHING SHADE TO MATCH THE SHADE OF TILES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LIFTING ( MANNUAL),ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS MIXING MORTAR, FIXING TILES IN POSITION, INCLUDING LIFT CHARGES, CURING, CUTTING THE BRICK MASONARY WALLS AND REDOING THE SAME SUCH THAT THE TOP SURFACE OF TILES IS TO BE FLUSHED WITH PLASTERED SURFACE ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOR GROUND FLOOR.

Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

PAINTING WITH ACRYLIC EXTERIOR EMULSION PAINT OF APPROVED MAKE ( ASIAN/ BERGER/ NEROLAC/ SAICOAT/ INDOCEM OR EQUIVALENT)AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIECTED 2COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC.,COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS (APSS NO:908)

PAINTING TO NEW WOOD WORK TWO COATS OVER ONE COAT OF WOOD PRIMER WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES INCLUDING PUTTY AND ALL INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE (THE RATE INCLUDES ONE COAT OF PRIMER AND TWO COATS OF PAINT) (APSS NO.1201, 1207, 1212).FOR FINISHED ITEM OF WORK

PROVIDING HIGH YIELD STRENGH DEFORMED (HYSD) BARS (Fe 500 GRADE) AS PER IS 1786-1979) OF DIFFERENT DIAMETRES FOR RCC WORKS INCLUDING LABOUR CHARGES FOR STRAIGHTENING, CUTTING, BENDING TO REQUIRED SIZES AND SHAPES, PLACING IN POSITION WITH COVER BLOCKS OF APPROVED MATERIALS AND SIZE AND TYING AND LAPSPLACING WITH BINDING WIRE OF 18 SWG , FORMING GRILLS FOR REINFORCEMENT WORK AS PER APPROVED DESIGN AND DRAWINGS, INCLUDING COST AND CONVEYANCE OF STEEL BARS INCLUDING ALL WASTAGES SUCH AS OVERLAPS COUPLINGS, CHAIRS,SPACER BARS, INCLUDING COST AND CONVEYANCE OF BINDING WIRE, COVER BLOCKS AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS CUTTING , BENDING, PLACING IN POSITION, TYING INCLUDING SALES AND OTHER TAXES ON ALL MATERIALS ETC., COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS FOR BARS BELOW 36MM DIA WHERE THEY ARE NOT WELDED(APSS NO. 126)

(TD)SUPPLING, POSITIONING AND FIXING DOOR FRAME MADE OF MS 'T' SECTION OF SIZE40MM X40MM X6 MM (INCLUDING COST OF MS 'T' SECTION FRAME) WELDED AT CORNERAND FULLY PAINTED WITH STANDARD PRIMER COAT INCLUDING 6 NO.S OF 'Z' HOLDFASTS OF SIZE 20x20x3MM OF 230 MM LONG, 4 NO,S. OF M.S 125MM LONG BUTT HINGES, 25MM WIDE 3MM THICK M.S FLAT AT BOTTOM WELDED TO THE FRAME AS DIRECTED ETC., COMPLETE. FOR THE DOOR OF SIZE 0.75 X2.00 M (SINGLE SHUTTER)

FLUSH SHUTTER FOR TOILET: SUPPLY AND FIXING OF 35 MM THICK FLUSH DOOR SHUTTER, SOLID BOND WOOD BLOCK BOARD TYPE WITH COMMERCIAL PLY ON BOTH FACES INCLUDING SUPPLY, POSITIONING AND FIXING TO THE EXISTING DOOR FRAME MADE OF MS 'T' SECTION, INCLUDING 2 NOS. 125 MM LONG DOOR HANDLE, 1 NO. ALDROP OF SIZE 250 MM LONG, 2 NOS. OF 200 MM LONG TOWER BOLTS, INCLUDING PROVIDING KICK PLATE WITH 24 GUAGE ALUMINIUM SHEET UP TO 230 MM HEIGHT ON FRONT FACE & FULL HEIGHT ON REAR FACE INCLUDING BOTTOM EDGE OF THE SHUTTER WITH BOLTS, NUTS, NF SCREWS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER AND FIXING ETC., INCLUDING MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSSNO:1001&1002).(DOOR OF SIZE 0.75X2.10M)

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be

SUPPLY AND FIXING OF 22.20MM OD PIPE - SDR 11 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND FIXING OF 28.60MM OD PIPE - SDR 11 ASHIRVAD / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENTS OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRVAD FLOWGUARDS SDR 11 MADE FROM IDETICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) INCLUDING COST AND CONVEYANCE OF PIPE & ITS FITTINGS AND ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

S&F OF 15 MM BRASS BODY CP FINISH TWO WAY BIB TAP OF NOT LESS THAN 400 GRAMS WEIGHT WITH QUARTER TURN SPINDLE INTERNAL/ EXTERNAL THREADED CONNECTION CONFORMING TO IS 8931 INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES FOR FIXING ETC., COMPLETE

CONSTRUCTING 457.2 X 457.2 MM ( 1'-6" X 1'-6") BRICK MASONARY INSPECTION CHAMBER WITH CM (1:6) PROP. USING 2ND CLASS CLAY BRICKS OF 225MM THICK , AND FITTED WITH 457.2 X 457.2 MM (1'-6" X 1'-6") RCC COVER UP TO A DEPTH OF 914.4 MM (3'-0") AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND PCC (1:2:4) BENCHING AND CHANNEL 100 MM THICK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, SAND, BRICKS, WATER ETC.,TO SITE ,COST OF SEIGNORAGE, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTUCTING MASONARY, LIFT CHARGES, CURING ETC., COMPLETE INCLUDING COST OF STEEL AND ITS FABRICATION FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION

SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 KG/CM2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

CONSTRUCTING 904.0 MM (3’0”) DIA SOLID BLOCK MASONRY INSPECTION CHAMBER AS PER IS - 4111: PART-1:1986 WITH CEMENT MORTAR (1:6) PROP USING FLY-ASH BLOCKS OF 225 MM THICK FROM APPROVED SOURCE HAVING A MINIMUM CRUSHING STRENGTH OF 10 N/SQ.MM INCLUDING PLASTERING WITH CEMENT MORTAR 1:3 PROP; ½” THICK BOTH INSIDE AND OUTSIDE FITTED WITH 20” DIA RCC MANHOLE COVERS AND FRAMES INCLUDING EXCAVATING PITS UP TO A DEPTH OF 914.4 MM (3'-0") IN ALL SORTS OF SOILS (EXCLUDING ROCK) AND LAYING CEMENT CONCRETE (1:4:8) 150 MM THICK USING 40 MM HBG METAL AND P.C.C. 1:2:4 BENCHING AND CHANNEL 100 MM THICK AS PER STANDARD SPECIFICATION AND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS LIKE CEMENT, SAND, BRICKS, WATER ETC., TO SITE, COST OF SEIGNIORAGE CHARGES ON ALL MATERIALS AND ALL INCIDENTAL AND OPERATIONAL, LABOUR CHARGES LIKE MIXING CEMENT MORTAR, CONSTRUCTING MASONRY, LIFT CHARGES, CURING ETC., COMPLETE FOR FINISHED ITEM OF WORK AS PER STANDARD SPECIFICATION.

SUPPLYING AND FIXING in position 584.2mm long orrisa pan with 100mm p or s trap including providing brick masonry seat using 2nd class bricks as per standard practice and providing pvc low level flushing system of 8 litrs capacity including cutting the walls and floors cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

SUPPLYING, LAYING, JOINTING AND TESTING OF 100 MM DIA SWG SP-1 PIPES OF ISI MAKE CONFIRMING TO ISI:651&4127, WITH AIRTIGHT CEMENT JOINTS IN CM(1.5:1) PROP. INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M (3'-0") DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE

SUPPLY AND FIXING OF BATTEN HOLDER / SLANTING HOLDER IN LIEU OF CEILING ROSE OF LIGHT POINT COMPLETE WITH ALL CONNECTIONS AND ALL LABOUR CHARGES WITHOUT BULB (FOR NEW INSTALLATION). BH MAKE: ANCHOR / GOLD MEDAL OLIVE / MILLION ZOOM.

SUPPLY AND RUN OF 2 OF 22/0.3MM (1.5 SQMM) FRLS / HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES: POLYCAB /RPG / MILLION / POWER FLEX / ANCHOR.

SUPPLY AND RUN OF 1 OF 14/0.3MM (1.0 SQMM) FRLS / HFFR PVC INSULATED 1100V GRADE AS PER IS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR EARTH CONTINUITY INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. MAKES:POLYCAB /RPG / MILLION / POWER FLEX / ANCHOR.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable(Makes:Polycab) in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with suitable Module surface box covered with suitable Modular Cover Frame, with 3 Plate Jumbo Ceiling Rose (Anchor : Make ) including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Modular Switch, surface box & Cover frame Make: Anchor Roma Viola

Supply and Fixing of 25mm outer dia heavy grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan , common and separate plug point including all labour charges etc., complete. Makes : Sudhakar / MODI / ATUL.