Telangana State Medical Services And Infrastructure Development Corporation Tender

Procurement and Supply of Certain Furnitures to Upgradation from 10 bedded to 50 bedded Hospital at;Examination Couch Overall size: 1900 mm L x 945 mm W x 840 mm H With fitted BP tray. Fixed rexine upholstered top 64mm thick in two sections. Body frame work made from 0.9 mm (20 G) CRCA sheet and 20 mm x 40 mm x 1.6 mm (16 G) MS Rectangular Tubes Mattress platform = 1900 mm L x 565 mm W x 65 mm H - O.K. Couch fitted with stainless steel Legs made from 2.0 mm (14 G) SS 304 sheet & powder coated. Headrest made from 1.2 mm (18 G ) CRCA sheet and supported with MS flats size 25 mm x 6 mm adjustable on gas spring. Rod for operating gas spring is made from MS having diameter 12.7 mm and having black bush at both ends made from LDP. Upper section of box approx size 1220 mm L x 460 mm W x 630 mm H with three sliding drawers of approx size 440 mm L x 320 mm W x 75 mm H. Lower section comprises of three cabinets of approx inside size 435 mm L x 350 mm W x 435 mm H with separate doors & two with lock. Sliding foot step under the front side of lower middle cabinet made from 0.9 mm ( 20 G ) MS CRCA Sheet. Size of Foot Step is 415 mm L x 330 mm W 205 mm H above floor. B.P. apparatus tray made of 1.2 mm (18 G) MS sheet of approx size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod made from SS 304 having diameter 12 mm rotating through a bush fixed on the body of the couch. 355 mm L x 125 mm W x 20 mm H M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated 50 to 100 microns. Safe working load of 170kgs and patient load bearing capacity of 135 kgs. Supplied in SKD condition. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 & ISO 13485:2003 ). Optional Accessories: Paper Roll Holder Finish As per general Condition of Tender

Procurement and Supply of Certain Furnitures to Upgradation from 10 bedded to 50 bedded Hospital at;Bed side screens Scope: This specification is for the requirement of Bed Side Screens in hospitals. The IS4458 - 1967 standard specifies the requirements of metal-framed bedside screens used in hospitals and other similar institutions. MATERIAL Framework is made from 25 mm x 1.2 mm (18G) & 15.08 mm x 1.2 mm (18G) ERW tube complied as per 2.1 of IS 4033:1968. Castors size 50 mm made from high grade synthetic material which is complied with IS 4034. SHAPE AND DIMENSIONS The framework of the screen shall comprise 3 panels The middle panel being 1220 mm and the two side panels 610 mm wide H 1450 mm .Over all height of 1675mm. The tube used for the panels shall have outside diameter 25.4 mm and thickness 1.20 mm. The height of the panels shall be 1450 mm The panels shall be mounted on castors attached to tubular supports or extreme vertical tubes MANUFACTURE Framework -Each panel of the framework shall consist of two each panel folds flat on its neighbour. For supporting the curtains, each panel shall be fitted with hooks and expanding wires. Hinges -Each pair of adjacent panels forming a screen shall be connected by two hinges or a continuous hinge. In case two hinges are used, these shall provide the following features: Smooth unrestricted rotation of panels; Parallelism, within a tolerance of 2 0 between the adjacent tubes of the hinged panels A maximum gap of 8 mm between the adjacent tubes of the hinged panels ( preferably no gap ); and Sufficiently robust construction to minimize the effects of stresses encountered in normal use, such as those imposed by overturning the screen or by wheeling the screen along uneven ground Castors -The screen shall be supplied with six castors.Out these 6 castors,4 castors are fitted on base made from round tube 25.4 mm x 1.2 mm(18G) and 15.8mm x 1.2 mm (18G).One castor is fitted with each side panel.The castor diameter is 50 mm and type of castor is twin wheel swivel type dust free. Castors are fitted with Ms nut and bolts to each penal tube and base tube. CURTAINS FOR BEDSIDE SCREENS A-I. No requirements for curtains have been included in this standard as it is considered that the choice of material for curtains of the screen should rest with the purchaser. It is, however, desirable that the material should be opaque, light in weight, durable and suitable for frequent laundering Finish As per general Condition of Tender

Procurement and Supply of Certain Furnitures to Upgradation from 10 bedded to 50 bedded Hospital at;Store well Almariah Plain Multi bend construction and inter locking design and full length over lapping doors and side. Three way bolting mechanism. Spot welding & Ark welding. Anticorrosion treated components. DIMENSIONS OUTER: 1980 H x 910 W x 480 D mm Main Door with shutters Top, bottom LH & RH sides, shelves and back all materials thickness not less than 1 mm Almariahs to be provided with 4 full fixed shelves of inside shelve size 908 X 430 CRCA STEEL: Cold rolled close annealed steel used for thickness 0.6 to 1.0 mm range as per IS-513 1994 (reaffirmed in 1998). Grade ?D? or ?DD? quality. Chemical composition, tensile properties, bend test, surface, flatness, hardness as per IS-513 1994. Hot rolled steel used for thickness 2.0 to 3.15 mm range as per IS-1079 1994 IS-1079 1994 ?D? quality or IS-10748 1995 Grade-II. Chemical composition, tensile properties, bend test, surface flaws, roll mark, dent & lines etc. Weight 80 Kgs FINISHED general condition