Telangana State Medical Services And Infrastructure Development Corporation Tender

CELLULOSE PANELLED CUBICALS FOR TOILETS AND FLLOORING WITH FULL BODY HEAVY DUTY;Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

CELLULOSE PANELLED CUBICALS FOR TOILETS AND FLLOORING WITH FULL BODY HEAVY DUTY;Supply and fixing doors as per drawings with ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) (750mm x 2100mm).

CELLULOSE PANELLED CUBICALS FOR TOILETS AND FLLOORING WITH FULL BODY HEAVY DUTY;Supplying and Transportation fixing of stainless steel (304 grade ) Scrub 1mm thick of Indian make fixed including supply and fixing 31.75mm C.P. waste coupling, 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors (Length 3.00m,width 0.45m and 0.45 depth).

CELLULOSE PANELLED CUBICALS FOR TOILETS AND FLLOORING WITH FULL BODY HEAVY DUTY;Supply and fixing toilet cubical systems with 12mm thick colid compact Laminate Panels having high density, including doors, pilasters & intermediate panels, which should be resistant to water/fie/scratch & comes with anti-bacteria layer, water immersion through permissible increase on weight should be minimal. Finished product should be as per approved texture, shade & drawing, detailing and developed accoding to IS-2380 Standards. All pilasters are to be supported by adjustable foot and non corrisive inserts. Top rail and wall fixing with and exterior polyamide coating guarantees resistances to heat. The base of the adjustable foot will be anchored to the floor with a clearance height of 150mm. Aluminium U-Channel will be used for the fixing of intermediate panels to the wall. The toilet cubicle setup shall include necessary hardware fittings, as per manufacture's specifications and approved by Engineer.Each toilet compartment shall be equipped with the following accessories in SS/Nyylon, complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

CELLULOSE PANELLED CUBICALS FOR TOILETS AND FLLOORING WITH FULL BODY HEAVY DUTY;Flooring with full body heavy duty industrial variety porcelain vitrified tile of size 600 x 600 mm and thickness between 10 - 12 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707).