Telangana State Medical Services And Infrastructure Development Corporation Tender

Furniture and Equipment CHC Narnoor;Incubator (Including taxes)

Furniture and Equipment CHC Narnoor;Domestic Refrigerator Single Door, 220 Litres and above, Warranty 1 Year & Compressor Warranty 10 Years as directed by the Enigneer-in-Charge. (Including taxes)

Furniture and Equipment CHC Narnoor;f) Camp couches 1.Mobile Foldable designed to fold into a compact 2. Not more than 24?W X 46?L X 8?H 3. Weight should not be more than 20 Kg. 4. Should be easily to clean and maintain 5. Should be in durable tubular aluminum frame /Iron/Steel. 6. Should be able to bear the larger donors weight up to 150 Kg. 7. 7. Should have padded armrest for extra comfort to the donor, adjustable for proper arm placement. (Including taxes)

Furniture and Equipment CHC Narnoor;e) Screens 1. Scope: This specification is for the requirement of Bed Side Screens in hospitals. 1.1 The IS4458 - 1967 standard specifies the requirements of metal-framed bedside screens used in hospitals and other similar institutions. 2. MATERIAL 2.2 Framework is made from 25 mm x 1.2 mm (18G) & 15.08 mm x 1.2 mm (18G) ERW tube complied as per 2.1 of IS 4033:1968. 3. SHAPE AND DIMENSIONS 3.1 The framework of the screen shall comprise 3 panels The middle panel being 1220 mm and the two side panels 610 mm wide H 1450 mm .Over all height of 1675mm. 3.2 The tube used for the panels shall have outside diameter 25.4 mm and thickness 1.20 mm. The height of the panels shall be 1450 mm. The panels shall be mounted on castors attached to tubular supports or extreme vertical tubes 4. MANUFACTURE 4.1 Framework -Each panel of the framework shall consist of two each panel folds flat on its neighbour. For supporting the curtains, each panel shall be fitted with hooks and expanding wires. 4.2 Hinges -Each pair of adjacent panels forming a screen shall be connected by two hinges or a continuous hinge. In case two hinges are used, these shall provide the following features: a. Smooth unrestricted rotation of panels; b. Parallelism, within a tolerance of 2 0 between the adjacent tubes of the hinged panels c. A maximum gap of 8 mm between the adjacent tubes of the hinged panels (preferably no gap ); and d. Sufficiently robust construction to minimize the effects of stresses encountered in normal use, such as those imposed by overturning the screen or by wheeling the screen along uneven ground 4.3 Castors -The screen shall be supplied with six castors.Out these 6 castors,4 castors are fitted on base made from round tube 25.4 mm x 1.2 mm(18G) and 15.8mm x 1.2 mm (18G).One castor is fitted with each side panel.The castor diameter is 50 mm and type of castor is twin wheel swivel type dust free. Castors are fitted with Ms nut and bolts to each penal tube and base tube. (Including taxes)

Furniture and Equipment CHC Narnoor;d) Revolving Stools SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 +0.1 cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14- 18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Overall size: 1220 H X 500W X 460 D HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/nr and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The one-piece armrests are injection moulded from black Co- polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM: The mechanism is designed with the following features: 360° revolving type. Upright position locking 1 Tilt tension adjustment Seat/back tilting ratio of 1:3. TUBULAR FRAME: The powder coated (DFT 40-60 microns) tubular frame is cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is CR Sheet U Bend 2 MM Thickness Chromium Coated and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. Pitch-centre dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS): The twin wheel castors are injection moulded in Black Nylon. Finish As per general Condition of Tender and as directed by the Enigneer-in-Charge. With 3 Years Warranty. (Including taxes)

Furniture and Equipment CHC Narnoor;c) Computer Chair Computer Chair/Revolving Malaysian medium back chair seat and back moulded rubber foam with PU handles with syncro hydraulic gas lift and tilting system and PU base with 5 wheels locking system with fabric. with 3 years warranty from the date of supply (Including taxes)

Furniture and Equipment CHC Narnoor;b) 3 Seater Visitor Chair 1. The bench used for the purpose of patients and their attendants seating, in the waiting areas, in the consulting rooms, clinics and side rooms of the hospital wards. 2. MATERIALS: 2.1 Framework: The Frame work shall be made of CR Pipe 100 x 50 rectangle 1. 6mm thick Legs and cross to 50 mm dia 1.6 mm thick . 2.2 Seat and backrest: The perforated stainsteel sheet 1mm thick mould , sides inside 25 mm flat, Handles 38.5 mm ss round tube thick 1.6 all stainsteel material 202 grade as directed by Engineer-in-Charge With 3 Years Warranty Finish As per general Condition of Tender (Including taxes)

Furniture and Equipment CHC Narnoor;Furniture a) Tables DIMENSIONS: 1450 W x 680 D x 750 H (In millimetres) MATERIAL: a.PLB/PLT-Top 25 mm thickness. All PLB and PLT (Prelaminated twin) is of following grade. Grade II Type II- Designation PLB-22 (As per IS: 12823-1990) Each PLB/PLT may contain following material layers: Particle board,top with 2mm thick hot pressed PVC beading with keyboard Moulded type. c. Under structure: This table should be Square CR tube 30 x 30 under structure with Prime Quality C.R steel square tube 1.22mm Thickness. d. Storage: 3 Draw & 2 Draw Metal is provided for storage. One side 2 Draw and other side 3 Draw Metal shall be provided. Drawer: Box-Box-File : dimensions 390 W X 430 H X 560 D mm. Construction & Material: Welded Assembled, CRCA as per IS-513. hack Sides, Top & Bottom, Box 0.6 Think. Drawer Tray & Front- 0.8 mm. CRCA as per IS-513, Drawer slides used must be of Heavy Duty Telescopic channels All steel metal components are manufactured from finest quality steel, which conforms as per IS-513 Grade D, DD All Steel tubes used for desk under structures are as per IS-36011984, IS- 7138-1973, IS-4923-1985. Shoes These shall be manufactured from hard rubber or PVC and shall be uniform in texture and chemically inactive to the action of mild acids. The nominal height of the shoes, shall be 35mm. With 3 Years Warranty. Finish As per general Condition of Tender and as directed by the Enigneer-in- Charge. (Including taxes)

Furniture and Equipment CHC Narnoor;Supply Fixing and transporation of 5kva/4kw single phase Mahindra CPCB II compliant DG, Prime Rated, AIR cooled, powered by Mahindra KD441-GS12engine-8.2bhp coupled with 5KVA Leroy-Sommer / Crompton electric alternator, microprocessor-based Controller, Silencer, Anti-Vibration mountings, exhaust flexible connector, Batteries with cables, fuel tank, Acoustic Enclosure with Standard Panel. Above price includes 18% gst, transportation, unloading to the site. Installation guidance and commissioning at free of cost. (Including taxes)