Telangana State Medical Services And Infrastructure Development Corporation Tender

Establishment of Central Medicine Store in Teaching Hospital Siddipet in Siddipet District. Sub Work;Office Table small size DIMENSIONS:1200 W x 600 D x 750 H mm MATERIAL: a) PLB/PLT - Top 25 mm thickness. All PLB and PLT (Pre laminated twin) is of following grade. Grade II Type II - Designation - PLB-22 (As per IS: 12823 -1990) Each PLB/PLT may contain following material layers: Particle board, top with 2mm thick hot pressed PVC beading with keyboard Moulded type. Under structure: This table should be Square CR tube 30 x 30 under structure with Prime Quality C.R steel square tube 1.22mm Thickness. Storage: 3 Draw is provided for storage. With Right Side with Metal shall be provided. Body for Storage Units: Body and draws for storage unit dimensions 390 W X 430 H X 560 D mm shall be made from CR steel sheet not less than 0.8 mm thick with heavy duty Telescopic Channels. This shall be bent to box shape from one piece and tack welded at final overlapped comer or assembled with a maximum of two pieces properly welded All steel metal components are manufactured from finest quality steel, which conforms as per IS-513 Grade D, DD All Steel tubes used for desk under structures are as per IS-3601 ? 1984, IS-7138-1973, IS-4923-1985. Shoes - These shall be manufactured from hard rubber or PVC and shall be uniform in texture and chemically inactive to the action of mild acids. The nominal height of the shoes, shall be 35mm. Finish As per general Condition of Tender

Establishment of Central Medicine Store in Teaching Hospital Siddipet in Siddipet District. Sub Work;Computer Table Overall Size (W x D x H):(+/-1) mm DIMENSIONS:1200 W x 600 D x 750 H mm PLB - Top 25 mm thickness. All material Drawers Size Key Board 18 mm Thickness, All PLB (Pre-laminated Particle Board)is of following grade. Grade II Type II - Designation - PLB-22 (As per IS: 12823 - 1990) One Draw One Cub Board CPU Tray with Full Key Board With L Pad The metal frame size 25 x 25 mm Square pipe 1.22 mm thickness BM slide for keyboard Finish As per general Condition of Tender

Establishment of Central Medicine Store in Teaching Hospital Siddipet in Siddipet District. Sub Work;Open Rack Steel Slotted angular racks, open type with 6 shelves making 5 compartments of size 1800mm x 900mm x 450 mm, CR Sheet Shelfs 1.2mm Thickness with an Angle of 2 mm thickness and size: 40 mm x 60 mm, with 8 corner brackets of 2 mm thickness. Finish: Sheet Metal Components: All dents, burrs and sharp edges shall be removed from the various components. The components shall be individually pickled, scrubbed and rinsed to remove grease, rust, scale or any other foreign element. Immediately after pickling, all the mild steel parts shall be given phosphate treatment conforming to Class C or IS : 3618-1966. The process for application of phosphate coating shall be in accordance with IS: 6005-12970. Two Coats to enamel paint (colour Grey is preferred) shall then be applied as follows: Finish coat with enamel paint conforming to IS : 151-1950, IS:2932-1974 or IS : 2933-1975. In the case of stoving enamel the components shall thereafter be backed at a specified temperature in an over heated uniformly. The finish shall be smooth and uniform with a hard and touch film of enamel, strongly adhering to the surface. The finish shall be free from all visible defects and shall not chip when tapped lightly with a dull pointed instrument. Note: Putty shall be applied to all the surfaces requiring filling and shall conform to IS: 110-1968.Tests: The performance tests required for the finished racks shall be carried out as per the methodology mentioned in the IS 6189:1985. The Rack shall have a name plate or label fixed to it showing the manufacturer?s name, initials or recognized trademark. Hospital furniture items shall be subjected to tests in accordance with the requirements of relevant specifications. However, the painted furniture items shall also satisfy the adhesion test and in addition satisfy the performance test give below: Shoes: These shall be manufactured from PVC / hard rubber bush. Nominal height of the shoe shall be 35 mm. Outside dimensions of 3mm. Finish As per general Condition of Tender