Telangana State Medical Services And Infrastructure Development Corporation Tender

Procurement of Kitchen Equipment for Government Medical College, Narayanpet in Narayanpet District;Supply and transportation of Prepainted Galvanised Iron Walk in Cold room to Store vegetables of size 6 Ft Wide * 4 Ft Deep * 7 Ft Height complete for finished item of work.

Procurement of Kitchen Equipment for Government Medical College, Narayanpet in Narayanpet District;Open Rack Steel Slotted angular racks, open type with 6 shelves making 5 compartments of size 1800mm x 900mm x 450 mm, CR Sheet Shelfs 1.2mm Thickness with an Angle of 2 mm thickness and size: 40 mm x 60 mm, with 8 corner brackets of 2 mm thickness. Finish: Sheet Metal Components: All dents, burrs and sharp edges shall be removed from the various components. The components shall be individually pickled, scrubbed and rinsed to remove grease, rust, scale or any other foreign element. Immediately after pickling, all the mild steel parts shall be given phosphate treatment conforming to Class C or IS : 3618-1966. The process for application of phosphate coating shall be in accordance with IS: 6005-12970. Two Coats to enamel paint (colour Grey is preferred) shall then be applied as follows: Finish coat with enamel paint conforming to IS : 151-1950, IS : 2932-1974 or IS : 2933-1975. In the case of stoving enamel the components shall thereafter be backed at a specified temperature in an over heated uniformly. The finish shall be smooth and uniform with a hard and touch film of enamel, strongly adhering to the surface. The finish shall be free from all visible defects and shall not chip when tapped lightly with a dull pointed instrument. Note: Putty shall be applied to all the surfaces requiring filling and shall conform to IS: 110-1968. Tests: The performance tests required for the finished racks shall be carried out as per the methodology mentioned in the IS 6189:1985. The Rack shall have a name plate or label fixed to it showing the manufacturer?s name, initials or recognized trademark.Hospital furniture items shall be subjected to tests in accordance with the requirements of relevant specifications. However, the painted furniture items shall also satisfy the adhesion test and in addition satisfy the performance test give below:Shoes: These shall be manufactured from pvc / hard rubber bush. Nominal height of the shoe shall be 35 mm. Outside dimensions of 3mm.

Procurement of Kitchen Equipment for Government Medical College, Narayanpet in Narayanpet District;Supplying of SS 2 HALF DOORS CHILLER of 628 liters capacity of any approved ISI brand including of labour charges etc., complete for finished item of work.