Telangana State Medical Services And Infrastructure Development Corporation Tender

Providing aluminium partitions, sump, branding;Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work. 32mm Nominal bore

Providing aluminium partitions, sump, branding;Construction of under ground water sump of 1.05 Mts dia and depth of 2.10 mt including earth work excavation, laying of PCC bed with 1:5:10 of 0.15 Mts thick and providing RCC precast rings of size 0.90 Mts dia 50mm thick with RCC M 20 Prop precast slab 50mm thick and impervious 20mm thick including labour charges loading, unloading and incidental & operational charges including all taxes for finished item of work..

Providing aluminium partitions, sump, branding;Supply and fixing powder coated aluminium partly glazed partitions with door as per the approved drawing using aluminium sections of 62.50 mm x38.10 mm , 1.21 mm thick for alround frame and powder coating of alluminium sections 25mm microns thick, fitted with 12 mm thick prelaminate board using glazing clips , and as approved by Engineer-in-Charge with required No. of screws etc. complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer (1750mmx2100mm)

Providing aluminium partitions, sump, branding;Supply and fixing powder coated alimunium partly glazed door Cum Partition as per the approved drawings using aluminium sections of 65mm x 45mm , 1.50 mm thick for outer frame alluminium sections 95.25mm x 44.45mm x 1.50mm thick and fixing for Shutter Styles, Top & Middle Rail and Alluminum section of 95.25mm x 44.45mm x 1.50mm thick for bottm rails powder coating of alluminum sections 25mm microns thick, and 12mm thick prelaminate board for top & bottom portion of door using glazing clips and as approved by Engineer-in-charge with required No. of Screws etc., complete for complete for finished item of work . (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer (1600mm x 2100mm).

Providing aluminium partitions, sump, branding;Repairs to Existing Gate duly providing 10mm Sq.bars Horizontals & Verticals, Bottom "L" Angler and duly fixing GI Sheet at bottom including all cost and conveyance with all materials and labour charges for fabricating etc., fixing in position transportation charges etc., complete for finished item of work.

Providing aluminium partitions, sump, branding;Painting two coats with synthetic enamel paint using Cement primer water base Interior Grade-I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work for Wall Painting

Providing aluminium partitions, sump, branding;Painting of 6 Nos logos as per Type A branding of Sub Center building

Providing aluminium partitions, sump, branding;Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T & P, labour charges etc., and overheads & contractors profit complete for finished item of work.

Providing aluminium partitions, sump, branding;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904).

Providing aluminium partitions, sump, branding;Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Providing aluminium partitions, sump, branding;Unreinforced cement concrete up to 15cm thickness

Providing aluminium partitions, sump, branding;Kadapa slabs or shahabad stone slabs on sand bed

Providing aluminium partitions, sump, branding;Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete Brick masonry

Providing aluminium partitions, sump, branding;Supply and fixing of 12mm thick Plywood shutters including of all labour charges etc., complete for finsihed item of work.

Providing aluminium partitions, sump, branding;Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mmthick heat moulded single side Prelam Pac ?C? channel of size 30mmX50mm to form stiles.5mm thick & 75mm wide single side prelimPac sheets shall be for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer ?in-Charge, manufacture specification and drawing.

Providing aluminium partitions, sump, branding;Dismantling doors, windows and clear storey windows, Ventilators etc., (wood or steel) shutters including Chowkhats, architraves,hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and overheads & contractors profit complete for finished item of work.