Telangana State Irrigation Development Corporation Limited Tender

Cement Concrete in (1:4:8) proportion using 40mm size hard granite machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, dewatering , all leads and lifts and labour charges for machine mixing, laying, ramming, curing etc. complete

Manufacturing, supply, erection and testing of M.S.Pipes and pipe specials as required including M.S.Sheet for pipes, M.S.Plate for flanges as per ISI, cutting bending, rolling,welding fabrication including transportation to site laying in position aligning, jointing, welding if necessary at site including cost of jointing materials like bolts and nuts rubber packing, painting with one coat of red oxide and 2 coats of anti corisive bitumen paint both inside and out side including cost and conveyance of all materials, labour charges etc. complete

Delivery Cistern: Earthwork in excavation in ordinary soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom and backfilling with approved material

Sand Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH including cost & conveyance of all materials, all operational, incidental labour charges etc complete

Cement Concrete in (1:4:8) proportion using 40mm size hard granite machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, dewatering , all leads and lifts and labour charges for machine mixing, laying, ramming, curing etc. complete

R.C.C. grade M20 (Design mix) corresponding IS 456 using weigh batcher/ mixer with 20mm size graded machine crushed hard granite metal from approved quarry including cost & conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc. to site including all operational incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc for Raft

R.C.C. grade M20 (Design mix) corresponding IS 456 using weigh batcher/ mixer with 20mm size graded machine crushed hard granite metal from approved quarry including cost & conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc. to site including all operational incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc for Well Steining

Providing High Yeild Strength Deformed steel bars/ TMT from prime producers (TATA/SAIL/VSP/Jindal) (Fe 500 grade as per IS 1786-2008 of different diameters, including labour charges for cutting, bending to required sizes and shapes, placing in position with cover blocks of approved size and tying with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars and binding wire from approved sources to site of work, cover blocks and all incidental, operational labour charges cutting,bending,placing in position, tying etc., complete for finished item of work for Raft & steining

ELECTRICAL & MECHANICAL WORKS: - Supply of brand new Submersible Mono Block Pump sets of 10 HP to operate on 3 phase 415 V electrical supply, capable of discharging 0.50cusecs/ 14.27LPS at a total head of 72.05ft/ 21.97mt due to all causes as per specification furnished in the tender schedule. The pump should be provided with stainless steel impellers & Horizontal stand PMU and all required accessories etc complete for fixing of the pumpset to the existing pipe line are to be provided. The details of Levels and Technical specifications are shown in Annexure I

Supply of XLPE PVC insulated armoured sheathed Aluminium LT Cable for jointing AAA conductor to Submersible pumpsets. 3.5 core 35 Sq.mm No. of runs : Two runs

Manufacturing , supply and erection of control panel board. The panel board should be metal clad, dust and vermin proof, floor mounted industrial type, indore type for controlling 2 Nos. 10 HP/7.5KW Horizontal shaft squirrel cage induction motors coupled to Submersible pumps in submerged condition- Note:- Any alterations suggested by electrical inspector during inspection are to be attended by the tenderer/ contractor as a supplemental item.pump sets. The panel board with accessories should internally wired neccessary earthing terminal shall be provided. The electrical system shall comply as per IE rules and relevant ISS. The thickness of sheets to be used for fabrication of panel board should be 16 guage. the cable boxes wherever necessary with adequate cabling space for termination of cable is to be provided. The components of Panel Board/Technical details are shown in Annexure II

Erection, wiring, commissioning as per the specifications details furnished in Tender Schedule for errection of 2nos 10HP Submersible Monoblock pumpsets including erection tools and safety equipments complete.

Laying of O.H Electrical lines with 34 Sqmm AAA conductor on 8.00M PSCC poles in river bed portion upto I.F wells from the Control shed point to avoid theft of copper cables in the ground 250M length.

Supply and fixing of 6'' clampsets