Telangana State Industrial Infrastructure Corporation Limited Tender

Procurment of equipment R D;All contact parts are in SS 316 Direction of the Blade rotation can be changed using a Reversing switch for Hammer or Knife operation Multiple combinations of Screens / Speeds / Number of Blades / Direction of blade rotation for every Product type Wide range of SS perforated and Wire knitted screen available for every Product type Additional perforated screen at the bottom of pulverising chamber ensuring Higher Fineness and Controlled Size of Granules Built in Variable Frequency Drive for multiple speeds "Motor: 3 HP/1440 RPM/415 V TEFC 50 c/s AC Charging Ht.: 1525 approx. Discharge Ht: Reversible DOL 650 approx Rotor Assembly dia.: 250 mm Rotor Speeds: approx 2880 RPM Blades: 12 with knife & Impact edges and 2 scraper blades Screen sizes: i) Perforated 1 to 25 mm ii) Wire mesh 4 to 200 mesh" IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;Temperature range and settings: 40?200°C, in increments of 1°C; stand-by temperature selectable from 50?120°C Infrared heating Sample heating: using a metal tube heater, >480 W Heating programs: Switch-off criterion: Standard drying, gentle drying, MA35 mode, Fully automatic, Semi-automatic mg (1?50 mg/5?300 s) ? Semi-automatic & (0 .1?5 .0%/5?300 s) ? Time (2:00?99 .59 min . Net weight, approx . Weighing Functions Max . weighing capacity Repeatability, typical Readability: 1 mg; 0 .01% Typical sample quantity:5 to 15 g Automatic detection of Sartorius printers YDP30 and YDP40, direct data transfer to Microsoft® Windows programs without additional software; programmable data output interval Disposable sample pans, 80 pcs ., aluminum, d 90 mm External adjustment weight: 50 g, (certified standard traceable to E2 class) Sample forceps IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;Capacity: 15 kgs 6" Coating pan(50 - 150 gms. / batch), 8" (150-500 gms./batch) Coating interchangeable pan Stainless steel perforated drum which has a plexi front door and housing Coating efficiency. What goes in, comes out, virtually eliminating waste and increasing profitability and efficiency of the machine. Touch screen controls with traceability Easy Cleaning & Maintenance Switch from one product to another with minimal downtime, reducing the costs of labor and tooling replacements. Variable drum speed 3-40 rpm. Electrical air heating 2 Kw. Constant liquid dosing by peristaltic pump and bi-fluid nozzle. Product sample port and sample spoon. Temperature, product temperature, cabinet depression and process time. Critical process data : drum speed, air flow, inlet /outlet air. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;Contact parts in stainless steel 304 or 316. Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum. Baffles provided in the shell. Manhole with gasket is provided to fix baffles and for ease of cleaning the shell. Charging and discharging is through a butterfly valve. A conical adaptor can be provided for fixing charging. Drum after butterfly valve. Unit can be provided with bin charging arrangement. "All moving parts are enclosed in guards. A safety railing with a limit switch is provided for operator safety. Manual Inching arrangement can be provided. Flame ? proof motors with flame ? proof push button stations can be provided. Material handling in Octa Blender is through Bin charging or a Vacuum charging system Optional in built in Vacuum design. No external PTS required. Zero Jerk Load as machine is both dynamic and statically balanced. GROSS VOLUME LTR- WORKING VOLUME LTR - MOTOR HP-OUTPUT SPEED RPM- DISCHARGE VALVE (INCHES) 250- 200- 1- 8. -6 inches 375- 300- 1 - 5/10- 6 niches 625- 500- 2 - 5/10- 6 inches." IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;General Specifications: MOC of Dust Cover, MOC of Contact Parts , MOC of Non-Contact Parts : SS 304 Number of Decks / Screens : 1 Number of Screen :1 Wire Mesh Count/Opening : As per design Type of Screen : Standard Material of Wire Mesh : SS304 Deck Discharge, Dome Discharge :Side spout Motor Power : 0.5HP 3 phase Motor Protection : IP65 Type of Clamps : hook, Tee & Stud Dust cover : Yes Ball Tray system : No Castor wheel : Yes IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;As per Drawings as approved by the Authority using standard material.

Procurment of equipment R D;Spply Transportation and installation of 50 KVA, 192/240 OV DC true on line UPS system IGBT technology pure sine wave ourput, With double conversation with auto and manual static by pass switch single phase input/single phase output.

Procurment of equipment R D;As per requirement/Mfg Specfifications

Procurment of equipment R D;Matching the requirements of the equipment supplied. As per the Mfg/Supplier Recommendations/ Requirements

Procurment of equipment R D;As per Enclosure

Procurment of equipment R D;? Electrode Stack Colour: Blue ? Minimum Detection Limit:100 ppb ? Range:0->4000 ppm ? T90 Response Time (Seconds):<3 ? Sensitivity:>0.65 mV/ppm @ 100 ppm ? Lamp Energy:10.6 eV ? Supply Voltage (using internal regulator):3.6 ? 18 V (non intrinsically safe 10 ? 18 V) ? Supply Voltage (using a regulated power supply):3 ? 3.6 V ? Current:20 ? 32 mA (130 mA for 100 ms at start up) ? Power Consumption: 100 mW at 3.3 V ? Output Signal (using internal regulator): 0 ? 3.2 V ? Output Signal (using a regulated power supply): 0 to rail voltage ? 0.1 V ? Temperature Range:-40 to 65 °C ? Relative Humidity Range:0 ? 99% RH, non-condensing ? Expected Life:>5 years ? Lamp Life:10.6 eV 10,000 Hours ? Warranty:10.6 eV lamp and MiniPID Body ?12 months 11.7 eV lamp ? 3 months

Procurment of equipment R D;? Construction: Doubled walled chamber with PUF insulation. ? Interior is of SS 304 and Exterior is either Mild steel powder coated Or stainless steel 304. ? Full length inner glass door to view stored samples and outer metal door with gasket, lock & key. ? PU wheels for easy movement. Stainless steel trays for sample loading. Forced air circulation to maintain Uniformity. ? Applications: Specially designed as per ICH Q1B option 2. Chambers are used to study the photogenic effect on the samples when exposed to UV light & LED light separately or combined. ? Control System: Complete operations driven through PLC with data storage capacity of upto 1000 readings& facility to send email alerts directly from the PLC. ? Heating System: Long lasting Nichrome wired U-shaped SS tubular heaters with SS fins. ? Sensor: High quality PT - 100 Class A sensors. Cooling System: Emerson make CFC free cooling system consists of hermetically sealed compressor coupled with evaporation coil and condenser. It is safe guarded by time delay circuit. ? Refrigerant 134A.

Procurment of equipment R D;? Construction: Doubled walled chamber with PUF insulation. ? Interior is made of SS 304 and Exterior is as mentioned below. ? Full length inner glass door to view stored samples and outer metal door with gasket, lock & key. PU wheels for easy movement. ? Stainless steel trays for sample loading. Forced air circulation to maintain uniformity. ? Application:The unit is fully suitable to carry out stability studies for conditions such as: 25°C / 60% RH, 30°C / 65% RH, ? 30°C / 75%RH, 40°C / 75%RH. Also suitable to meet ICH conditions laid out for drug products packed in semi-permeable ? containers such as: 25°C / 40% RH, 30°C / 35% RH, 30°C / 65%RH, 40°C / NMT 25% RH. ? Control System: Complete operations driven through PLC with data storage capacity of upto 1000 readings. ? Heating System: Long lasting Nichrome wired U-shaped SS tubular heaters with SS fins. ? Humidity System: Humidity is by steam injection.Humidity system consists of reservoir tank & humidifier tank, which is ? fitted with two nos. of humidifier heaters -one works as primary and other as standby. Upon detection of fault, system ? automatically switches over to the other heater & raises an alarm. ? Sensor: High quality Temperature & Humidity combo sensor with 4-20mA output. Cooling System: CFC free cooling system consists of hermetically sealed compressor coupled with evaporation coil land ? condenser. It is safe guarded by time delay circuit. ? Alarms: Audio-visual alarms for Temperature & Humidity deviations (High & Low),Door Open,Water supply failure, Component Circuit Error, Mains failure. ? Safety: Safety devices for Temperature & Humidity Overshoot & Temperature Undershoot, Float switches to detect low-water ? level & cut-off heater supply, Delay Timer to safeguard the compressor, MCB to cut off over current supply, Surge arrester to ? filter electrical noise ? Electrical Supply:Single-Phase 230 Volts, 50 Hz mains supply. Also available in 60 Hz cycle. ? Temperature Range/Accuracy/Uniformity : 20ºC to 60ºC/ ± 0.2ºC/ ± 1ºC ? Humidity Range/Accuracy/Uniformity : 40%RH to 95% RH/ ± 2% RH/ ± 3% RH ? MOC Exterior/Interior : Stainless Steel ( 304 )/Stainless Steel ( 304)

Procurment of equipment R D;Measuring scales ? °Optical Rotation, °Optical ? Rotation (cell length-corrected), ? °Specific Rotation, °Specific ? Rotation (cell-length-corrected), ? % concentration (g/100 mL, g/L, ? g/100 cm³, kg/m³), °International ? Sugar Scale (not temperature compensated), mathematical ? functions, and user-definable scales ? Measuring range ±89.9° ? Resolution 0.001° ? Accuracy ±0.003° ? Temperature resolution 0.1 °C ? Temperature accuracy 0.1 °C ? Temperature measurement ? Temperature sensor inside the ? measurement cell or quartz control ? plate (wireless transfer to the ? instrument) ? Repeatability ±0.002° ? Wavelength 589 nm and optionally 365, ? 405,436,546 and 578nm ? Light source LED light source with a lifetime of ? 100,000 hours for all wavelengths ? Sensitivity Optical Density (OD) of 4.0 ? Sample cell path length From 2.5 mm to 200 mm ? Built-in temperature control from 10 °C to 45 °C; to ensure sample measurements without temperature gradients. ? LED light source for all possible wavelengths with 100,000-hour lifetime - multiple wavelengths option: in addition to standard wavelength of 589 nm, the following wavelengths are optionally available: 356, 405, 436, 546 and 578 nm. ? Wireless identification of the sample cell and quartz control standard for the highest traceability and usability

Procurment of equipment R D;? 4 channels for analysis of Sodium, Potassium, Lithium & ? Calcium ? Single Point Calibration: ? Na 0.1 ? 60 ppm, K 0.05 ? 60 ppm, Li 0.05 ? 50 ppm, Ca ? ? 100 ppm ? Multi Point Calibration: ? Na 0.1 ? 1000 ppm, K 0.05- 1000 ppm, Li 0.05 ? 1000 ? ppm, Ca 1.0 ? 1000 ppm ? Limits of Detection: ? Na- 0.03 ppm, K- 0.02 ppm, Li- 0.02 ppm, Ca- 0.3 ppm ? Complete with starter & fluid pack. ? Aspiration Kit, Gas Hose, Manuals covering all aspects ? of the Flash FP, Certificates of analysis for all provided ? fluids, Material safety data sheets for all provided fluids, ? The FP-PC software installation USB ? Fluid Kit: ? De-Ionised water (1 L) ? Decon 90 (150ml) ? Sodium Standard 10,000ppm (150ml) ? Potassium Standard 10,000ppm (150ml) ? Lithium Standard 10,000ppm (150ml) ? Labware Kit: ? 1ml Pipettes (10), 10ml Pipettes (10), 2m of waste tube, ? 100ml Volumetric Flask (1) and Sample Cups (100) ? BWB Flash Flame Photometer aids in compliance to ? GLP , LIMS Integration, Multi Access User Login feature ? and not compatible with Automatic Fluid Handling System

Procurment of equipment R D;? Titrator with stirrer /Function license Advanced /Measuring module digital ? High-end titrator with built-in magnetic stirrer for use of intelligent electrodes ? dTrodes ? and the facility to upgrade to perform up to five Parallel Titrations. ? the titration modes DET (Dynamic Equivalence point Titration), MET (Monotonic Equivalence point Titration) and SET (titration to one or two preset endpoints). ? Potential Measuring range: -2400?+2400 mV / Karl Fischer Titration ? OMNIS Liquid Adapter /Bottle cap, multi-use ? Sensors/dEcotrode plus /dSolvotrode /Electrode cable f.plug-in head Q/Plug P 0.55m. ? Compatible with all existing sensors/ Four Port Titrating Burette /Cylinder unit OMNIS 20mL. ? Comprehensive Liquid Handling ? Electrode holder for Titrator Included Park station for electrodes / Network cable 1m / Rod for Pistons for DU / Clear glass bottle square GL45 1L / PTFE Stirring Bar 16 mm / PTFE Stirring Bar 25 mm / Clamping Ring 10mm / Support Rod 30 cm / Buffer Solution pH4/7/9 (3x10x30mL) / Phit Kit ? Software and Instrument License / Software storage device / Stand-Alone licence with 1 instrument /Regulation/Compliance Stand Alone License-based PC program for controlling systems. ? Solvent Module (for KFV Titration) / KFT Equipment for Titrator (for KFV Titration) ? Dosing Module with stirrer (for KFV Titration) / 10 mL cylinder unit (for KFV Titration) ? Analog measuring module / Function license KFT with conditioning ? Function license Upgrade Advanced-Professional (for Parallel Titration) ? Cable MDL PL/SO 1 m / 20 mL cylinder unit (for Non Aqueous Titration)

Procurment of equipment R D;? ViscoQC 300L ? Viscosity test type Multi-point ? Viscosity range [mPa·s] ? (depends on the measuring system 0.1* to 6 M ? Speed [rpm]: 0 to 250 ? Speed list with 18 standard speeds ? Freely selectable speeds within the speed range ? Max. spring torque [mNm] 0.0673 ? Accuracy ±1.0 % full scale range ? Repeatability ±0.2 % ? Display 7? color touchscreen ? Data storage ? Data memory for up to 999 measurements ? Print/export from data memory ? The ViscoQC can be equipped with the PTD 100 Cone-Plate measuring system with integrated ? Peltier temperature control within seconds, providing a sophisticated method for absolute viscosity ? determination of small-volume samples down to 0.5 mL. Highlights of this all-in-one solution: ? Error-eliminating, time-saving automatic gap setting ? Built-in Peltier temperature control from 0 °C to 100 °C and embedded temperature probe for super-precise temperature control and reading ? -Spindles with magnetic coupling and Toolmaster? feature, saving up to 25 seconds per spindle change and preventing costly operator errors

Procurment of equipment R D;? The HPLC System configuration includes quaternary solvent delivery ? (QSM-R) and sample introduction via a direct inject sample manager (SM ? FTN-R) with temperature control. The system may be configured for a ? broad range of applications supported by choice of either one, of the ? two available HPLC optical detectors. ? The following items are included as part of this configuration: ? HPLC Quaternary Solvent Manager (QSM-R) ? HPLC Sample Manager FTN (SM FTN-R) with Temp Control ? Leak Sensor Assembly (QTY = 3) ? C18 Column, 3.5µm 4.6 x 50 mm ? 2 mL Glass Vial with pre-slit Septa (Pack of 100) ? HPLC Start-up solution and info set ? Driver Pack 2019 R2 SR1 (Analytical) ? Kit, Accessories HPLC System ? Assy, Bottle Tray and HPLC 30cm Column Heater/Cooler ? Startup Kit, HPLC Sys with CHC/CH ? System License 1 Pack with Personal qualification and server qualification by IQ/OQ document ? ASSY, PREHEAT TUBE W/PLT, UV/Visible Detector

Procurment of equipment R D;? Column temperature: Max. 450°C (Room temperature + 2°C) ? Carrier gas control: Constant linear speed control, constant flow rate control, constant pressure control possible Pressure: Max. 970kPa, Flow-rate: 1,300mL/min ? Sample injector: Split/split less, direct, on-column, programmable temperature vaporizer ? Detectors: FID with touch panel display ? GC main System with power cable/plug ? Lan cable, FID jet assy 0.3 ? Stand alone auto injector, 30I mounting parts,4-poles ? Tool kit for GC and IQ/OQ documentation ? 1 Column SH-I-5MS Cap. Column 0.25mm, 0.25µm, 30m ? 1.5mL Clear, Screw top Vials with caps and septa ? Consumables Trial Kit - Lite Version 2.3, 100/pk and 3 Filters Kit - 1/8" SS ? 4mL wash vial kit (including vial, cap, septum) 12pcs and CS GC Control License

Procurment of equipment R D;? True Double Beam Optics with aberration corrected Czerny turner monochromator Mounting ? High resolution grating with 1800 lines/mm for high energy throughput. ? New high-throughput dynamic Beam Manager for high sensitivity measurements ? direct Pb quantification in flame analysis ? Complete measuring wavelength range from 900 nm to 185 nm with automatic setting using automatic line search ? 6-step bandwidth selection with automatic switching ? 0.1, 0.2,0.4, 0.7, 1.0 and 2.0 (Low) ? Detector system with photomultiplier tube 8-lamp motorized turret controlled through software with 2 lamps simultaneously lit, one for measurement and other for warm up ? Flame absorption and flame micro-sampling measurement modes as standard ? Optionally upgradeable with Graphite Furnace Atomizer ? High Speed dual frequency simultaneous measurement D2 background correction and high-speed Self Reversal background correction is provided as standard ? High efficiency nebulizer with Engineering Plastic chamber, Platinum-Iridium orifice and Ceramic impact bead 10 cm Titanium burner is provided as standard ? Fully computerized gas flow control system with automatic setting of optimum fuel and oxidant flow rates ? All the safety functions including leak check; flame monitor; gas pressure monitor; interlock for wrong burner head use; Automatic switch-over between Air-C2H2 / N2O-C2H2 flame with flow rate ? monitoring using optical sensor is provided as standard Automatic ignition and extinction of flame ? New Window based 32-bit WizAArd software for complete instrument control, data acquisition and processing Software includes strengthened QA/QC functions in accordance ? with US Environmental Protection Agency (EPA); user management function by user name and password; access control; audit trail; electronic records and electronic signatures ? Hardware validation support software is provided as standard

Procurment of equipment R D;Apparatus is for determining the proteinaceous nitrogen content in water. It is also useful for preparing small quantities of distilled water. Apparatus can be used for phenol, selenium and fluoride determinations. It has 24/40 Standard Taper joint and a #2 hose connection. Unit measures 595 mm H x 310 mm W. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;Photometric System : Double beam system 1300 lines mm, 240nm blazed grating. Setting Wavelength Range : 185nm to 1400nm Measurement Wavelength Range : 185 nm to 900 nm Spectral Bandwidth : 0.1, 0.2, 0.5, 1, 2 & 5 nm Wavelength Accuracy : ±0.1nm(656.1nm D2),±0.3nm(All range) Wavelength Scanning Speed : Scan Rate: 4000 to 0.5 nm/min Stray Light : Max 0.005%(220 nm, NaI) : Max. 0.005% ( 340, 370 nm, NaNo2) : Max 1% (198 nm, KCI) Photometric Accuracy : ±0.002 Abs. ( 0.5 Abs) : ± 0.003 Abs ( 1 Abs) Photometric Range : -5 Abs. to 5 Abs. Transmittance, reflectance: 0 to 100000% Monochromator : Czerny-Turner mounting. Light Source : 50W Halogen and Deuterium lamp Light source auto position adjustment Built in.

Procurment of equipment R D;? Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass ? Inter changeable Joints ? With Splash Head 24/29, 19/26 ? With Kjeldahl flask 500 ml 24/29 ? With Coil condenser 200 mm 19/26

Procurment of equipment R D;? Speed range 150-1500 RPM ? Ceramic hot plate for temperature up to 550°C ? Easy to read backlit LCD display for Set and Actual parameters with monitoring ? High accuracy temperature control with dual sensors ? Advanced with microprocessor technology ? Constant speed even with change of load/voltage ? Brushless motor for free and easy maintenance ? Scratch proof & high chemical resistance ? External Temperature probe (PT-1000) for fluid temperature control ? Last parameter recall and ideal for repetitive process ? Unique safety temperature control system ? Safe temperature limit setting to avoid over heating with heat cut off ? Residual Temperature warning even when switched off for operator safety

Procurment of equipment R D;? PMDC motor for high torque at low speed ? Speed regulation even with small volumes at low speed ? Accurate stepless speed control maintains excellent speed stability ? Totally enclosed unit with digital display and RPM up to 1200 ? Suitable to use even in corrosive atmosphere ? In built SS hot plate and control by energy regulator

Procurment of equipment R D;Max. flow rate: 23 l/min ? Max. vacuum: -680 mmHg ? Capacity: 300 ml / 1000 ml ? Filter diameter: 47 mm / 50 mm ? Effective filtration area: 12.5 cm ² ? Port thread: 5/16 inch (8 mm) ? Filter funnel: PES ? Waste bottle: Borosilicate glass (with drain) ? Funnel support base: PP ? Funnel lid: PP ? 2 years in built warranty

Procurment of equipment R D;?Inventa-Ex? Fume Hood, Fume Hood dimensions:1200 mm W X 900 mm D X 1555 mm H with Centrifugal blower as standard accessory

Procurment of equipment R D;? Capacity: 220g ? Repeatability: 0.01mg ? External Weight Calibration Range: 95 ~ 220.009g (200g) ? Minimum USP Weight: 20 mg ? Linearity (s) : ±0.2mg/±0.1mg Unique Capability: ? Weight warning function ? Record format for GLP/GMP ? LabSolutions CS Connectivity ? ID/Password functionality for compliance Specific Features of AP: ? USB Barcode Reader ? Mol conversion ? Sample preparation ? Buffer Solution Preparation ? 13 Pre-loaded Buffer Recipe function"

Procurment of equipment R D;? Electrical Requirement: 220V SOHZ ? Controller: Programmable LCD display ? Power Consumption: 1550W ? Temperature Range: RT+10-250°C ? Display Resolution: 0.1 °C ? Temperature Stability: ±1°C ? Temperature Uniformity: ±2.5% ? Shelves: 3(Pc) ? Interior Dimension(WxDxH)mm: 500x380x750 ? Exterior Dimension(WxDxG)mm: 655x715x980 ? Chamber Volume: 150L ? Timing Range: 0-5999min Sensor: High quality PT - 100 sensor. Alarms: Audio alarms for temperature variation. Safety: Temperature Overshoot. Electrical Supply: Single-Phase 230 Volts, 50 Hz mains supply. Temperature Range/Accuracy/Uniformity MOC Exterior/Interior: 50oC to 280oC/ ± 2oC Stainless Steel (304)/ Stainless Steel (304) Display: 2line Alpha- Numerical LED display. Ethernet communication port for PC Communication & Printing Port (Attached with main unit). IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;? The heating element made of Fe-Cr-Al alloy is more resistant to ageing. Corrosion-resistant ceramic ?bre furnace. ? Microcomputer PID controller. ? 7 programs, 9 segments per program. ? Stability duration in each segment from 1 minute to 99h 59mins (or continuous). Stainless steel housing. ? Type K thermocouple sensor. ? Alarm for exceeding the set temperature. Visual and audible warning alarms. ? Over current, over voltage, overheat, and different safety precautions. When the door is opened, the safety switch automatically shuts off. ? Chamber Volume:7L with temperature range of 1100-1200°C. ? Preset Start /off with programmable controller. ? Temperature Uniformity with ±1°C ? Data logging with USB(optional) with Sensor Type-K Thermocouple. ? Insulation material: Alumina ceramic fiber and heating element Fe-Cr-Al[30-52min] ? Dimensions Internal [200x300x120mm] and External [460x650x674mm] with Power 3KW.

Procurment of equipment R D;? Castor wheel mounted cabinet is double walled with inner chamber of stainless steel & outer wall of M.S. Sheet duly powder coated. ? Double walled back of the unit is fitted with air circulation fan for maintaining temperature uniformity throughout the chamber. ? Full view inner glass door permits inspection of specimens without disturbing the same. ? Lock & Key arrangement is provided in the double walled outer door. ? Unit is fitted with door operated illumination lamp inside the chamber. ? The front panel is provided with separate indicator lamps for main, heating & incoming voltage. ? Supplied complete with adjustable shelves, cord & plug to work on 220/230 volts A.C. ? The temperature range is from 5°C to 60°C ? Accuracy ±0.5°C is controlled by Digital Temperature ? indicator ? cum ? controller ? Inner Dimension - 45x45x50 Cm

Procurment of equipment R D;? Open reflux digestors ? Facility of using large sample quantity for representation ? Air condensers to help digestion without loss ? Glassware : 15 Reaction Vessels & Air Condensers ? Vessel size : Dia 39 mm (Approx.) ; Volume 160ml ? Temperature : up to 200 C ± 1% 0 ? Capacity : 15 Samples at a time ? Sample Size : 20ml (for 2015 M1), 50 ml ( for 5015 M1) ? Range : 0 to 500 ppm without dilution. ? (Further samples analysed using dilution) ? Display : Graphic LCD module with large fonts ? Keyboard : Aesthetic, Soft touch Membrane Type ? Timer : Programmable up to 99 Hrs. 59 Min. ? Dimensions : 350mm x 350 mm x 210 mm ? Power : 230 v 50 Hz

Procurment of equipment R D;? RTD for Temperature sensors 1 No. ? Electrode stand 1 No. ? IQ / OQ Documents & Operating Manual 1 No. ? RS 232 Port 1 No. ? 69940520 Electrode Glass Body Refillable pH Combination Aqueous ? Electrodes - LP-03 ? Electrode Conductivity Cell 0.1 Constant - LC 01 1 No. Included ? Software (D-2250) PICO PH-CON MTR WITH DATA ? LOG & GRAPH IN PH MODE ONLY WITH TDS

Procurment of equipment R D;? pH range:-2.00 to 19.999 ? Resolution:0.1/ 0.01/ 0.001 pH ? Relative Accuracy:+/- 0.001 pH ? Slope:3 points 80% to 120%, 5 points 90% to 105% ? Sensor:Combination pH electrode ? Calibration:Auto-calibration and printout of Calibration Report. Millivolt: ? mv range - o to +/- 1999.9 mv ? Resolution - +/- 0.1 mv ? Relative accuracy- +1- 0.2 mv Temperature ? Temperature range - 0 to 150°C ? Resolution - 0.1°C ? Relative accuracy - +/- 0.2°C ? Sensor- RTD PT 100Temp. Compensation - Auto I Manual ? Input:1BNC, 1 Banana, 1 ATC - PT 100 ? Input Impedance:> 1012ohms Output ? Printer - Parallel port ? RS 232C - PC connectivity ? Keyboard:Alphanumeric splash water-proof Polyester soft keys. ? Display:20 x 2 line back lighted Liquid Crystal Display(LCD). ? Electrode diagnosis:Yes ? Data Storage:Non-Volatile memory. Report format o Report of selected pH & mV reading with temperature o Calibration report o Data table & Graph (optional) ? Power requirement:230 V ac, +10%/ 50Hz ? Environmental Operating Conditions ? Operation : Indoor ? Temperature : Ambient to 45°C ? Relative humidity :5 to 90% non-condensing ? Dimensions:305 x 220 x 70mm 0N x D x H) ? Weight:2.2 kgs. ? Advanced micro controller based user friendly state-of-the-art product design. ? PICO pH Meter complies to USP and DIN standards. ? Sleek moulded cabinet with alphanumeric splash waterproof polyester keyboard with soft keys. ? User interactive software in dialogue mode for ease of operation with protection against invalid entries. ? 20 x 2 line back lighted LCD display. ? Simultaneous measurement of pH, mV and temperature. ? Non- volatile memory storage of: ? 40 pH and 40 mV readings with temperature in pre-selected GLP or Non-GLP format. ? 24 data memory readings of pH, temperature and time in data logging mode (optional).? Password protection for calibration data and stored Readings. ? Calibration data with date and time stamp for authentication. Facility to view the calibration data. ? Calibration reminder alarm. ? Alphanumeric entries of sample name, identification number for authentication. ? Automatic temperature compensation by Pt.100 temperature sensor. Range 0° to 150° C. ? 3 point (Isopotential) or 5 point (linear or segmented) calibration protocol. ? Input stability indicator for reproducible results. ? Factory entered CUSTOMER NAME on report printout for authentication. ? Error indication helps the user to trace the problem. ? Audible beep indication during valid key operation. ? PC compatibility for data downloading (optional). ? Combined pH and conductivity instrument is available.

Procurment of equipment R D;Server networking with all Computers and Printers

Procurment of equipment R D;Computers for the Analytical Equipment with Printers

Procurment of equipment R D;Glassware and supporting Equipment

Procurment of equipment R D;Spply Transportation and installation of 50 KVA, 192/240 OV DC true on line UPS system IGBT technology pure sine wave ourput, With double conversation with auto and manual static by pass switch single phase input/single phase output.

Procurment of equipment R D;Production capacity: 1000 - 1250 kg/hr Size of particles: dust Foundation stand: pilley and belt blower with pipe

Procurment of equipment R D;SS-316 & SS 304 Standard GMP model Tray Drier 12 Trays ( 1 to 2 Kg) Load

Procurment of equipment R D;Hot Plate, Max Temperature: Up to 380°C, Plate Area: 180 x 180 mm (7 x 7 in.) , 230V

Procurment of equipment R D;? Having extraction rate of 12 litres for maximum energy efficiency. It has an air flow of 165CBM per hour with a variance of 10 per vent. The device emits very little noise, with sound emission of less than 50dB. It has a humidity control of 40 per cent to 80 per cent. The Powerpye Dehumidifier uses R-134 refrigerant which is CFC free, and is very environment friendly. ? Moist or wet stains are present on the walls or ceiling. ? The room feels unpleasantly stuffy. ? Windows are covered with condensation. ? Musty odors exist. ? Mold is visible. ? Excess moisture. ? Electric control ? Up to 24 hours timer ? Rotary compressor ? Auto-restart function ? Auto defrosting function ? Optional continuous drainage ? Environment-friendly refrigerant R134a ? Easy to carry with a pull-up handle ? Washable air filter ? Optional active carbon/HEPA filter ? Low noise ? Water full alarm and automatic shut-off function

Procurment of equipment R D;? Speeds range 150 ? 1500 rpm ? Stainless Steel Hot Plate model for temperatures up to 340°C ? Ceramic Hot Plate model for temperatures up to 550°C (10 MLH Plus) ? Easy-to-read backlit LCD for display of set & actual parameters ? Monitoring of set & actual temperature / speed ? High accuracy of temperature control with embedded dual sensors ? Advanced Stirrers with microprocessor technology ? Constant speed even with change of load / Voltage ? Maintenance free brushless motor ? Scratch proof & excellent chemical resistance ? External temperature probe (PT-1000) for control of fluid temperature ? Last parameter recall, ideal for repetitive processes ? Unique safety temperature control system ? Settable safe temperature limit to avoid overheating ? Residual Temperature warning when unit is switched off for operator safety ? Power (W):50 ? Max. stirring quantity (Water)(Liters):20 ? Stirring Paddle (PTFE coated):Q-20A (13 x 50mm) ? Motor rating input (W):18 ? Motor rating output (W):10 ? Speed range (rpm):150-1500 ? Speed / Temperature display:LCD ? Speed display resolution (rpm):1 ? Top Plate Material:Stainless Steel ? Dimension of Top Plate (mm):300 x 350 ? Dimensions (WxDxH) (mm):300 x 350 x 100

Procurment of equipment R D;Max capacity [Max]- 220 g, Minimum Load: 10 mg, Tare range: -220 g, Repeatability: 0.1 mg, Linearity: ±0.2 mg, Sensitivity drift: 1 ppm/°C in temperature +10 ° - +40°C , Minimum weight (USP): 200 mg, Minimum weight (U=1%,k=2): 20 mg, Stabilization time: 3.5 s, Adjustment/Calibration- internal (automatic), Display: LCD (backlit), Power supply: 12 ÷ 16 V DC, Operating temperature: +10 ° - +40 °C, Weighing pan dimensions: ø 100 mm, Net weight: 5.3 kg, Gross weight: 7.3 kg, Packaging dimensions: 495×400×515 mm. Analytical balance Anti-vibration table for keeping the balance to be provided. Certified weighing box. Software should be capable of meeting 21 CFR requirements. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;? Auto Zero ? Auto Calibration ? User Calibration ? 100% over load Protection ? Battery Backup provision ? Tare, Net/Gross Weighment ? 14mm 6 digit Bright Red LED ? Display ? Precise and Instant Weighing ? Accurate and Reliable ? Standby mode ? Capacity (Kg) 1 3 5 10 20 30 ? Readability (gms) 0.1 0.2/0.5 0.5 1 2 2/5 ? SS Pan Size (mm) 250X300 250x300 250X300 250X300 250X300 250X300 ? Optional Features ? Accumulation of Weighments ? Extra Display ? Set Points (High, Low) ? RS 232-C Serial Port ? Piece Counting ? Provision for SS 304 PAN / ? SS 304 Body ? 14mm 6 digit Bright Green / ? Blue LED Display ? Capacity (Kg) 3 ? Readability (gms) 0.2/0.5 ? SS Pan Size (mm) 250x300

Procurment of equipment R D;? Multipurpose stirrers for general purpose & PUF stirring ? Heavy duty stirrers for pilot plant, bench scale process & small batch production ? Models also available with digital speed indicator for speed indication & process validation ? PMDC motor for powerful stirring ? Reliable performance even in continuous use ? Stepless electronic speed regulator with digital display ? Hollow shaft in Geared models permitting height adjustment ? Chuck for easy interchangeability of shaft ? Stirring shaft SS 316; Retort Rods SS 304 ? Max Speed:120 to 2000 RPM, Capacity:25 LTRS.

Procurment of equipment R D;? Multipurpose stirrers for general purpose & PUF stirring ? Heavy duty stirrers for pilot plant, bench scale process & small batch production ? Models also available with digital speed indicator for speed indication & process validation ? PMDC motor for powerful stirring ? Reliable performance even in continuous use ? Stepless electronic speed regulator with digital display ? Hollow shaft in Geared models permitting height adjustment ? Chuck for easy interchangeability of shaft ? Stirring shaft SS 316; Retort Rods SS 304 ? Max Speed:200 to 2000 RPM, Capacity:10 LTRS.

Procurment of equipment R D;? Temperature range[°C]2-8°C ? Nominal Capacity [Liters]:317 ? Exterior dimensions W x D x H[mm]: 640 x 582 x 1880 ? Interior dimensions W x D x H[mm]: 540 x 425 x 1380 ? Door opening W x H in mm]: 540 x 1380 ? Insulation thickness[mm]: 50 ? Exterior / Interior finishing: White plastic coated galvanized steel ? Shelves: 5 & Levels: 5 ? Mechanical lock: Yes ? Battery: Yes ? Interior chamber temperature probe: Yes ? Controller type: Digital Screen ? Refrigerant type: Non HCFC ? Voltage/Frequency [V / Hz]: AC 220/50 ? Weight [kg]:92.5 ? Power failure alarm: Yes ? Temperature sensor failure alarm: Yes ? High & Low temperature alarm: Yes ? Door open alarm: Yes ? Temperature resolution:0.1°C ? Temperature uniformity:<2°C ? Cooling time:<0.8 hours

Procurment of equipment R D;? 392 ? ? Internal Volume:1.1 cu ft (30 liters) ? Temperature Range:Ambient+18?~ ? Display Resolution:0.1 ? Max Degree of Vacuum:133 Pa ? Timer:1~5999mins ? Maximum # of Shelves:4 ? # of Shelves:2 ? Max. Load per Shelf:20Kg ? Work Chamber Material:Stainless Steel ? Internal Dimension (WxHxD):320×320×300(mm) ? External Dimension (WxHxD):630×510×490(mm) ? Net Weight:37Kg ? Electrical Requirement:220V 50Hz ? Power Consumption:850W ? Shelves Material:316 SS ? Warranty:2 years ? Certification:CE ? Temperature Range:Amb+10°C - 200°C. ? P.I.D temperature controller provides accurate and reliable temperature control. ? Vacuum Range: 0 - 0.1MPa. (limit vacuum 133Pa) ? Bundled heating provides better temperature uniformity. ? Inert gas interface for easy access to inert gases such as nitrogen. (optional) ? LED lighting.(optional) ? Convenience? Inner chamber is made from corrosion-resistant mirror stainless steel. ? Built-in toughened glass door for clear observation of internal conditions. ? RS485 connector. (optional) ? Safety & Peace of Mind ? Temperature deviation alarm. ? Over current protection alarm. ? Over heat protection component protects your equipment. Will Cut off the heater automatically if the Temperature is out of control. ? Independent overtemperature limit controller for added safety.

Procurment of equipment R D;? Electrical Requirement: 220V SOHZ ? Controller: Programmable LCD display ? Power Consumption: 1550W ? Temperature Range: RT+10-250°C ? Display Resolution: 0.1 °C ? Temperature Stability: ±1°C ? Temperature Uniformity: ±2.5% ? Shelves: 3(Pc) ? Interior Dimension(WxDxH)mm: 500x380x750 ? Exterior Dimension(WxDxG)mm: 655x715x980 ? Chamber Volume: 150L ? Timing Range: 0-5999min

Procurment of equipment R D;Applications:drying Field of application:agriculture, biology, chemistry / plastics, construction materials, environment / recycling, food, medicine / pharmaceuticals Feed material:bulk materials and solids Material feed size*:> 100 µm Volume flow:185 m3/h Time setting:digital, 1 - 99 min / continuous operation Storable SOPs:9 Temperature control:continuously adjustable, 40 - 130 °C (depending on air throughput rate) Drying time*:5 - 20 min, depending on product, quantity, moisture content Container volume:1 x 6 l / 3 x 0.3 l Electrical supply data:200-240 V, 50/60 Hz Power connection:1-phase W x H x D:400 x 1000 x 480 mm Net weight:~ 21 kg Standards: CE.

Procurment of equipment R D;? Designed to meet current USP and ASTM specifications for tap density testing. ? Two Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100ml and 250 ml cylinders. ? The unique simultaneous tapping and rotating motion assures that the material is evenly packed. ? Calculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density. ? Balance Interface for sample weight transfer. Test Method ? USP Method I(300 taps per minute) ? USP Method II (250 Taps per minute) ? USP Method Ill (55 taps per minute) and ASTM (Optional) ? Tap Count Range:10-9999 ? Type of Drive:Direct Drive with steeper motor Drop height ? Position I= 14, ± 2mm ? Position II = 3, ± 0.2mm) ? Platform rotation:5-15 rotation I minute ? Display:20X2 Line back lighted LCD display ? Keyboard:Alphanumeric splash water proof polyester soft keys ? Operating Modes:USP, User selectable ? Output Printer:RS 232C ? Parallel Port:PC Connectivity for Data Downloading Cylinders ? Optional Cylinder :1 each, 1OOml & 250ml, ? Glass. For ASTM test - 1Oml,25ml and 50ml, ? Glass For USP Ill :- 1OOmL SS cylinder ? Cylinder Holder ? Optional Adapters :1each for 100 ml & 250 ml. ? For ASTM test - 1OmL,25mL and 50ml cylinder, ? For USP Ill :- 1OOmL SS cylinder ? Power Requirement:230VAC / 50 HZ, 45W Environmental Operating Conditions ? Operation Indoor:Temperature ambient to 45° c ? Humidity 20% to 80% ? Dimensions (Approx):340 X 31O X 200 mm (J'I X D X H) ? Shipping weight (Approx):13 kg

Procurment of equipment R D;? Separation, Fractioning, Particle size determination ? Electromagnetic Drive with unique sieving with 3D motion ? Built-In 5" Touchscreen Display ? Max. Feed capacity up to 3 Kg ? Measuring Range 20µm ? 25mm ? Sieve Diameters 100/150/200/203 mm (8") ? 9 Standard Operating Procedures (SOPs) memory ? Digital amplitude setting range 0.2 to 3 mm ? Digital Sieving time operation setting 01 ? 99min ? Continuous & Intermittent mode of operations ? Digital interval setting range 01--99 sec with Pause 01-9sec ? Max. Number of fractions 9/17 (200 or 203/100 mm Sieves) ? Test Sieves with Certificate 20µm ? 25mm ? Option of Wet Sieving accessories ? Option of Smart Screening Software ? RS232 and Balance Interface

Procurment of equipment R D;Capacity: 15 kgs 6" Coating pan(50 - 150 gms. / batch), 8" (150-500 gms./batch) Coating interchangeable pan Stainless steel perforated drum which has a plexi front door and housing Coating efficiency. What goes in, comes out, virtually eliminating waste and increasing profitability and efficiency of the machine. Touch screen controls with traceability Easy Cleaning & Maintenance Switch from one product to another with minimal downtime, reducing the costs of labor and tooling replacements. Variable drum speed 3-40 rpm. Electrical air heating 2 Kw. Constant liquid dosing by peristaltic pump and bi-fluid nozzle. Product sample port and sample spoon. Temperature, product temperature, cabinet depression and process time. Critical process data : drum speed, air flow, inlet /outlet air. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;Octagonal Blender Capacity 25 Ltrs to 1000 Ltrs Material Stainless Steel 304 / 316 and 316 Discharge Mode Butterfly valve Surface Galvanized

Procurment of equipment R D;SAIZONER Mixer Granulator Dry Mixing approx. 3 - 5 Mins. Working in L: 8 Volume in kgs: 4/2 Box ratio: 7:1

Procurment of equipment R D;? Has LCD display. ? Measures with metric or english scale and is self-zeroing. ? Range: 0 to 150 mm; 0 to 6 in. ? Accuracy: ± 0.1 mm.

Procurment of equipment R D;with following 1. Max capacity [Max]: 5,1 g 2. Readability [d]: 1 µg 3. Tare range: -5,1 g 4. Repeatability: 1 µg 5. Linearity: ±5 µg 6. Eccentric load deviation: 5 µg 7. Sensitivity stability: 1×10?6/Year×Rt 8. Sensitivity offset: 1,5×10?6×Rt 9. Sensitivity temperature drift: 1×10?6/°C×Rt 10. Minimum weight (USP): 2 mg 11. Minimum weight (U=1%,k=2): 0,2 mg 12. Stabilization time: 5 s 13. Adjustment: internal 14. Display: 5,7'' (touch screen) 15. Power supply: 13,5 ÷ 16 V DC 16. Power consumption: 700mA (wireless terminal - 1A) 17. Working temperature: +10÷+40 °C 18. Atmospheric humidity: 40% ÷ 80% 19. Pan Size: ø 26 mm 20. Weighing chamber dimensions: ø 90×90 mm 21. Packaging size: 565×565×355 mm. IQ/OQ/PQ need to be done as part of qualification. Capp pipette, variable vol. 0.1-2 ul, Bravo - 1 No. Capp pipette, variable vol. 0.5-10 ul, Bravo - 1 No. Capp pipette, variable vol. 2-20 ul, Bravo - 1 No. Capp pipette, variable vol. 5-50 ul, Bravo - 1 No. Capp pipette, variable vol. 10-100 ul, Bravo - 1 No. Capp pipette, variable vol. 20-200 ul, Bravo - 1 No. Capp pipette, variable vol. 100-1000 ul, Bravo - 1 No. Capp pipette, variable vol. 1-5 ml, Bravo - 1 No. Capp pipette, variable vol. 1-10 ml, Bravo - 1 No. IQ/OQ/PQ needs to be done as part of qualification.ROTA 3R REFRIGERATED UNIVERSAL CENTRIFUGE Specifications: Max. capacity [ml] Fixed-angle rotor: 200mL Max. RCF: 29,102 x g Maximum speed [rpm]: 20,000RPM Minimum speed [rpm]: 900 Max. acceleration time [S] Fixed-angle rotor 8241: 20 [s] Max. braking time [S] Fixed-angle rotor 8241: 20 Linear Acceleration & Deceleration curves: 0-9 Quadratic Acceleration & Deceleration curves: 10-19 Running time (HH:MM:SS): 99:59:59 & Run Hold Braking system: Dynamic Electric Braking Height x Width x Depth [mm]: 425X692x540 Height with lid open [mm]: 862 mm. Weight without rotor [kg]: 70 (kg) Electrical Requirement: 230 volts 50Hz 15Amp single phase Total Power consumption: 750 watts Interference suppression: EN 61326-1 Regulatory CE Certified Angled rotor 4 x 50 ml (fits Rot 3 /R) with the adapters (4x15 ML Falcon) - 1 No. Angled rotor 24 x 1.5 ml (fits Rot 3 /R) - 1 No. Labnet Enduro 10.10 Horizontal Gel Box 10 x 10 cm - 1 No. with following Specifications. Gel (W x L cm): 10 x 10 Unit (W x L x H cm): 12.5 x 22 x 9 Buffer volume: 300 mL Max sample capacity: 100. Supplied combs: 10* tooth (2) Accessories included: Horizontal gel with two 10 tooth combs, gel trays, casting gates and loading guides. ENDURO 300 volt Power Supply - 1 No. with following Specifications. Output voltage/range/increments: 2-300V/1V Output current range/increments: 4-500mA/1mA Output power range/increments: 90W max/na Timer: 1 min ? 999 min. or continuous Programmable: No Dimensions: 19 x 25 x 8 cm Weight: 4.8 lbs/2.2 kg Input voltage 120-230 V. RS232 port. Printer. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;? Ultrapure and reverse osmosis (RO) water systems are designed to produce consistent ultrapure water quality [resistivity 18.2 MO·cm @ 25 °C; total organic carbon (TOC) = 5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user?s specific application requirements. ? 3 flow rates or one touch volumetric dispensing ? Dispenser mounts where you want, up to 3 m from the system ? Confidence as you work with ?Check & Dispense? lights ? Multiple space-saving setups: on or under the bench, or on the wall ? Customize water quality with application-specific final filters ? Hands-free dispensing foot pedal option ? Large, intuitive touchscreen simplifies system use and data access ? Place the screen where you want, up to 3 m from the system ? Rapid quality monitoring assures your every dispense ? Inline proprietary TOC indicator measures at the point of use ? Unique and seamless design protects water quality and allows easy lab integration ? Easy-to-use Q-POD® ultrapure water dispenser ? 3 manually controlled flow rates - Low, Medium, High (< 2 L/min) - Adjust with your thumb ? One-touch volumetric dispensing - Quickly select from a pre-set menu of volumes, or customize to your needs - From 100 ml to 25 L, in 100 mL increments ? Wall- or system-mounted setup options ? Q-POD® dispenser rotates on a fixed arm for convenient filling ? Unhook the Q-POD® dispenser from its magnetic hold for agile manipulation ? System information and controls ? Water quality monitoring ? Dispense options ? Purification cartridge status ? Data access and reports ? Resistivity and temperature ? TOC indication (see page 7 for more information) ? Application POD-Pak installed ? Water recirculation status ? Remote system monitoring and control ? Rapid data access ? Paperless data management ? Monitoring frequency At dispense ? Accuracy Accurate indication within the range ? TOC values display ? = 5 ppb, if 0?5 ppb ? = 10 ppb, if 6?10 ppb ? >10?999 ppb, a whole number is displayed ? TOC measuring process Inline, post-dispense ? Photooxidation UV lamp Low pressure mercury lamp, 185 nm ? UV lamp replacement frequency Once every 2 years

Procurment of equipment R D;? Design pressure :20 bar ? Design temperature:200°C ? Material of Construction:SS316 vessel ? Drive 1/2 hp, ex-proof IIA/IIB AC motor with variable speed drive panel for 20-200 oscillations/ minute rocking. ? Gas cylinder:4 ltr. Cap. Gas cylinder of SS-304 with inlet, outlet valves, pressure safety valve, pressure gauge & flexible hose with NRV to feed gas into the vessel while in motion. ? Standard fittings:Vent Valve, dip tube with sampling valve, 2? opening on top for powder/ liquid inlet & cleaning, thermowell, pressure safety valve. ? Power Supply:1?, 220V AC, 50/ 60 Hz ? Mounting:Table Top SS Wire grid ( for glass vessel only).

Procurment of equipment R D;? Design pressure :20 bar ? Design temperature:200°C ? Material of Construction:SS316 vessel ? Drive 1/2 hp, ex-proof IIA/IIB AC motor with variable speed drive panel for 20-200 oscillations/ minute rocking. ? Gas cylinder:4 ltr. Cap. Gas cylinder of SS-304 with inlet, outlet valves, pressure safety valve, pressure gauge & flexible hose with NRV to feed gas into the vessel while in motion. ? Standard fittings:Vent Valve, dip tube with sampling valve, 2? opening on top for powder/ liquid inlet & cleaning, thermowell, pressure safety valve. ? Power Supply:1?, 220V AC, 50/ 60 Hz ? Mounting:Table Top SS Wire grid ( for glass vessel only).

Procurment of equipment R D;? The HPLC System configuration includes quaternary solvent delivery ? (QSM-R) and sample introduction via a direct inject sample manager (SM ? FTN-R) with temperature control. The system may be configured for a ? broad range of applications supported by choice of either one, of the ? two available HPLC optical detectors. ? The following items are included as part of this configuration: ? HPLC Quaternary Solvent Manager (QSM-R) ? HPLC Sample Manager FTN (SM FTN-R) with Temp Control ? Leak Sensor Assembly (QTY = 3) ? C18 Column, 3.5µm 4.6 x 50 mm ? 2 mL Glass Vial with pre-slit Septa (Pack of 100) ? HPLC Start-up solution and info set ? Driver Pack 2019 R2 SR1 (Analytical) ? Kit, Accessories HPLC System ? Assy, Bottle Tray and HPLC 30cm Column Heater/Cooler ? Startup Kit, HPLC Sys with CHC/CH ? System License 1 Pack with Personal qualification and server qualification by IQ/OQ document ? ASSY, PREHEAT TUBE W/PLT, Photodiode array Detector IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;? GC System Custom ? 0-100 psi Split/splitless with EPC. 0-100 psi split/splitless capillary inlet system with EPC. ? FID w/EPC, for capillary column only (Electronic Pneum. Ctrl.) optimized for capillary columns only. Includes digital control of all detector gases. Includes connectors for capillary columns. ? TCD with EPC. Thermal conductivity detector with EPC. Includes adapters/connectors for capillary, 1/8-inch and 1/4-inch columns ? Factory plumbing For quick installation ? Autoinjector Includes transfer turret, 16-sample turret, mounting post, parking post for GC. 10ul syringe, and solvent ? 7693 Tray, 150 vial includes three removable ? Headspace Sampler, 111 Vial capacity. 12 vial heating. Controlled by built-in keypad or external data system. Includes onboard ? 8-port 10/100Base-TX autosensing switch Allows up to eight devices to interface to a local laboratory LAN. Includes an 8- meter LAN ? Installation Kit for GCs w/out gas purifiers. Includes leak detection fluid, swage-type fittings, copper tubing, syringes, screw-drivers and wrenches. ? Analytical Instrument Qualification-On Demand ? Enhanced Extended Warranty - 3 Years Total

Procurment of equipment R D;? State-of-the-art design, suitable for white as well as coloured samples in powdered form. ? Instrument can detect melting range as well as melting point of various types of samples. ? Magnified image of the sample can be viewed on a video monitor screen via CCD camera which helps observe physical changes. ? GLP compliant printout with sample name, ID No., date, time etc. for authentication. ? Calibration Mode - Built-in calibration facility for two-point auto calibration with USP standards. ? Password protection for calibration mode. ? Compliance with USP melting range procedure as per Class - I A & EP Method 2.2.60. ? Graphical report of temperature v/s. light units with indications for start of melting & end of melting. ? Can also detect the melting range as well as melting point of decomposed samples, as well as waxy and polymer samples. ? Patented design. ? Onscreen Parameter/ Result display facility(Optional). ? Control:Microcontroller-based (Advanced version of microprocessor) ? Furnace construction:Round Block ? Temperature Sensor:PT100 (RTD) ? Temperature Range:Ambient + 5°C to 350 °C ? Temperature Readability:0.1°C ? Heating Rates:0.2°C/min, -12.0°C/min ? Max. Cooling Time from:350°Clo ambient (25 °C) 25 minutes {approx} ? Accuracy of Detection of melting temperature: Ambient + 5°C to 200°c - ± 0.5°C 200°c to 300°C - ± 0.8°C Above 300°C - ± 1.4°C Sampling ? Sample Size - 5 mg ( Approx.) ? Sample Holder:Glass slide < = 1mm ± 0.02 mm thick. ii) Glass capillary tube with one end sealed{optional accessory) ? Visual Image:1OX magnified image displayed on the monitor via CCD camera. ? Keyboard:Alphanumeric splash water proof polyester soft keys Display o 20 x 2 line back lighted liquid crystal display {LCD). o Portable 7" B&W monitor to view magnified image of sample. o Colour CCD with colour monitor (optional). ? Data storage:Non-volatile memory ? Program storage:100 methods with parameters

Procurment of equipment R D;Capacity: 220g ? Repeatability: 0.01mg ? External Weight Calibration Range: 95 ~ 220.009g (200g) ? Minimum USP Weight: 20 mg ? Linearity (s) : ±0.2mg/±0.1mg Unique Capability: ? Weight warning function ? Record format for GLP/GMP ? LabSolutions CS Connectivity ? ID/Password functionality for compliance Specific Features of AP: ? USB Barcode Reader ? Mol conversion ? Sample preparation ? Buffer Solution Preparation ? 13 Pre-loaded Buffer Recipe function"

Procurment of equipment R D;List Enclosed As Enclosed in Annexure C.

Procurment of equipment R D;? Cooling Capacity: upto -150C, ? Cooling Watts: 900Watts ? Pump flow: 12 l/min ? Power Supply : 230V

Procurment of equipment R D;? Evaporating flask -1Ltr ? Receiving Flask-1Ltr. ? Glassware set G3 vertical condenser for all standard Distallations. ? Features: ? All standard Hei- VAP Features for safety ease of use and economic benefits plus: ? The ease of use of two large dial control for adjustment of rotation speed and heating bath temperature. ? Large dial controls for adjusting rotation speed & bath temperature ? Digital display for speed control (RPM) and heating bath temperature ? Option to set required angle of the evaporating flask individually according to needs ? The patented flask clamp Easy-Clip allows a simple and safe removal of the evaporating flask due to the force ? of unscrewing the Easy-Clip ? Insulated handles for easy handling of hot liquid in the heating bath. ? Specifications: ? Hand Lift ? Height adjustment speed: Manual ? Height adjustment mm: 155 ? Rotation speed rpm:20-280rpm ? Rotation speed setting:Scale ? Drive:DC Motor with electronic speed control ? Heating Capacity:1300 W ? Temp. range of the Heat bath:20-210°C ? Temperature accuracy:±1K ? Overheat cut-off protection: 5ºC over temperature via separate pt100 ? Bath Temp. Display: digital ? Heating-bath temperature control:Electronic/Digital ? Secondary Overtemp. Cut -off:250ºC ? Materials heating bath:V4A(1.4404) ? Diameter Heating Bath:255mm ? Volume heating bath:4.5 I ? Supply power:1400W ? Weight:16kg ? Size(lxwxh):395x490x430 ? Protection class:IP 20 ? Conditions:0-40°C at 80% rel. humidity ? Cooling surface area:1400 cm². ? Part No: 591-00130-06 02No?s Included ? HSN code: 84141000 ? Heidolph- Vacuum pump Hei-VAC Valve Control ? Two-stage diaphragm pump made from chemical-resistant material ? High suction capacity of 2.0 m3/h for fastest evacuation ? Suction capacity for up to 3 rotary evaporators at the same time ? Achieves an ultimate vacuum of 7 mbar ? Vacuum can be controlled manually or via valve operated vacuum controllers ? Depending on your application you can switch on and off the vacuum pump via switchbox ? Power input: 180 W, Weight: 12.8 kg ? Dimensions: 195 x 245 x 310 (l x w x h / mm).

Procurment of equipment R D;Fume hood with following Specifications: Baffle Design 3-point suction fix type baffle arrangement for effective suction of light, medium and heavy fumes. Sash Arrangement Vertical rising/ Combination type. Cup sink Oval Shaped, size approx. 130x80mm ? 1 No. per hood. Service Valves Panel mounted valves with color coded as per DIN/ BS standard remote knobs fitted on front vertical post. Valve tubing Flexible tubes 1.5m long provided. Front Vertical Post Aero Dynamic Design. Air Foil In Flip on Type Design. Exhaust Outlet Streamlined exhaust outlet with suitable size Volume Control damper. Electrical Panel Box Provided below the fume hood in GI construction. IQ/OQ/PQ needs to be done as part of qualification.

Procurment of equipment R D;? Column Capacity:10 ? Column ID Reader Option: No ? Depth: 622 mm ? Flow Range:1-200 mL/min ? Injection Range:5 ? 61000 µL ? Intelligent System Emulation Technology : No ? Line Voltage:100-240 VAC ? Maximum Number of Fractions:432 ? Maximum Number of Solvents:4 ? Pump Type: Binary ? Special Features: Delay Sensor Automated Delay Volume Calibration Analytical-to-preparative work ? System Pressure Operating Range:20-600 bar ? Autoscale Preparative LC System with fully automated combined sample injection fraction collection enables scale-up from analytical to preparative chromatography on one single system to maximize your capacity to increase your daily throughput, and maximize purity ? Support of automated workflows through import and export of sample sequences while focusing solely on your target compounds to minimize re-analysis time and reformulation of collected fractions ? Highly reliable and robust LC system improves your ability to manage ever-increasing workload demand ? Easy-to-change pump heads provide dynamic flow range up to 200 mL/min at maximum 600 bar for versatile application within a wide range of preparative workflows ? Upgradeable fraction capacity based on your demand ? Integrated and automated fraction delay sensor technology for increased purity and recovery of collected fractions ? Control and organization of valves: five multipurpose slots provide enhanced organization of valves, fraction delay coils, and Agilent 1290 Infinity II MS Flow Modulator for a significant increase in productivity ? Integration of all standard collection modes and compatibility with multiple trigger sources provides compatibility to existing purification methods ? Lowest delay volume to minimize peak dispersion and carry-over for the highest sample recovery and purity ? Clean software infrastructure through Agilent OpenLab CDS ChemStation for familiar and reliable operation ? Automated purification software opens the door to workflow automation to scale-up from analytical to preparative conditions based on scientific algorithms - eliminates the need for time-consuming method development to improve daily purification cycles ? Width:989 mm

Procurment of equipment R D;? The HPLC System configuration includes quaternary solvent delivery ? (QSM-R) and sample introduction via a direct inject sample manager (SM ? FTN-R) with temperature control. The system may be configured for a ? broad range of applications supported by choice of either one, of the ? two available HPLC optical detectors. ? The following items are included as part of this configuration: ? HPLC Quaternary Solvent Manager (QSM-R) ? HPLC Sample Manager FTN (SM FTN-R) with Temp Control ? Leak Sensor Assembly (QTY = 3) ? C18 Column, 3.5µm 4.6 x 50 mm ? 2 mL Glass Vial with pre-slit Septa (Pack of 100) ? HPLC Start-up solution and info set ? Driver Pack 2019 R2 SR1 (Analytical) ? Kit, Accessories HPLC System ? Assy, Bottle Tray and HPLC 30cm Column Heater/Cooler ? Startup Kit, HPLC Sys with CHC/CH ? System License 1 Pack with Personal qualification and server qualification by IQ/OQ document ? ASSY, PREHEAT TUBE W/PLT, UV/Visible Detector

Procurment of equipment R D;? Full mid-IR wave number range from 7,800cm-1 to 350 cm-1 ? Michelson?s interferometer with 300 incident angle, completely sealed and desiccated optics ? Highest Signal-to-Noise ratio in its class of minimum 23,000:1 or higher (peak-to-peak, Around 2,100 cm-1 , 4 cm-1 resolution, 1 min accumulations) ? Wavenumber precision - ±0.0005cm-1 (@2,000cm-1) ? Wavenumber accuracy - ±0.1cm-1 ? High stability and throughput features dynamic alignment at 5000 times per second ? Maximum spectral resolution of 0.9 cm-1 up to 16 cm-1 ? Ge coated KBr beam splitter with moisture resistant coatings on surfaces ? High intensity long life Ceramic source & 3 years guarantee ? High sensitivity temperature controlled DLATGS detector (DTGS doped with L-Alanine) ? Data sampling by Semiconductor laser with temperature control & 6 years guarantee ? Sample compartment- Equipped with automatic accessory recognition mechanism & allowing it to easily accommodate third-party accessories. ? IR Pilot program*2 offers 23 standard application programs to simplify analysis for all users.

Procurment of equipment R D;Photometric System : Double beam system 1300 lines mm, 240nm blazed grating. Setting Wavelength Range : 185nm to 1400nm Measurement Wavelength Range : 185 nm to 900 nm Spectral Bandwidth : 0.1, 0.2, 0.5, 1, 2 & 5 nm Wavelength Accuracy : ±0.1nm(656.1nm D2),±0.3nm(All range) Wavelength Scanning Speed : Scan Rate: 4000 to 0.5 nm/min Stray Light : Max 0.005%(220 nm, NaI) : Max. 0.005% ( 340, 370 nm, NaNo2) : Max 1% (198 nm, KCI) Photometric Accuracy : ±0.002 Abs. ( 0.5 Abs) : ± 0.003 Abs ( 1 Abs) Photometric Range : -5 Abs. to 5 Abs. Transmittance, reflectance: 0 to 100000% Monochromator : Czerny-Turner mounting. Light Source : 50W Halogen and Deuterium lamp Light source auto position adjustment Built in.

Procurment of equipment R D;? LC MS system ? Nitrogen Generator, Genius XE35, 230V 1 ? Dry Backing Pump Option 1 ? APcI Probe Option 1 ? MS Ref StdsXEVO TQ-XS 1 ? ACQUITY H-Class PLUS (CH-A) Core System 1 ? ACQUITY UPLC PDA eLambda Detector 1 ? ACQUITY UPLC Column Heater Cooler 30cm 1 ? CH-A Extension Kit H/I-Class for MS 1 ? SYRINGE, 500 uL, HPLC 1 ? MassLynx Performance Workstation with TL 1 ? MONITOR, 23" 1 ? Analytical LC-MS Solvent Install Kit 1 ? Tandem Quad System Install Cert. 1 ? ASSY, EXTENSION LOOP, 50uL 1 ? UPLC Family 10mm ML4.2 QualSvc 1 ? ML 4.2 Full Security, New Xevo TQ-XS 1 ? NUT/FERR,UPCHURCH,F300,PLATFORM LC,QTY 2 1 ? S10 TUBE PEEK 1/16" x 0.005" 10M RED 1 ? FLUIDICS TUBING AND FITTINGS 1 ? 17-a-hydroxyprogesterone Sample Kit

Procurment of equipment R D;? GCMS/MS- with EI 220V GC, narrow bore ? (fast GCMS)to wide bore (total volume injection) Capillary Column ? Interface, with EI dedicated Source 360L/s Differential Turbo Molecular ? Pump. GCMS Insight Software Package ENG for GCMS-TQ Series ? NIST Library 2020 Edition ? LabSol GC Connect CS Ready ? Ulvac RP Assy, GHD-031BSE, 200-240V ? Oven Light Unit ? Flame ionization detector FID-2030 ? AOC-20I Plus (NEW) Auto Injector ? Installation Parts ?AOC-20i ? AOC-20s U Auto Sampler (150 Vial Capacity) ? 20SU Mounting Parts ? Additional Board 20SU ? GCMS NX series Consumables GSKit * GCMS Entry Kit, basic consumables * septum x 50 pcs * syringe x 1 pc * insert (split, splitless) x 5 pcs * Vespel ferrule (column O.D.: 0.4, 0.5) x 10 pcs * column nut x 10 pcs * insert O-ring x 10 pcs * SH-Rxi-5Sil 30m x 0.25mm x 0.25um * Shimadzu 1 triple gas filter kit - 1/8" SS * LabTotal Vial Kit - 1.5mL clear screw top vials with caps and septa, ? 100/pk ? Filter for split, for Nexis GCMS ? Maintenance Kit for NX * split filter for AFC-2030, 1 pc * filament, 2 pcs * Scotch Brite for polishing the ion source, 1 pc * gold packing, 1 pc * aluminum packing, 100 pcs insulator bush, 1 pc ? Toolkit for NX *Spanner,Double open end 10X12-R, 2 pc *Spanner,Double open end 6X8-R, 2 pc *Wrench,SPL-2010, 1 pc *Tweezers, 1 pc *Screwdriver,Torque #2 100MM, 1 pc *Nut Driver,4.0, 1 pc *Screw - Driver, Minus 100MM, 1 pc *Spanner 3/16X1/4 AF, 1 pc *JIG,IS, 1 pc *JIG for column connection(I/F), 1 pc *JIG for column connection (INJ), 1 pc *Cutter,Capillary tube, 1 pc *Screwdriver,Hexagon 006-1.5MM, 1 pc *Parallel pin, SUS304 1X12, 1 pc *G-Type Blank Nut (WITH 2pcs) *Tape, Yellow, 1 pc *Case with tool kit picture, 1 pc ? VAT for RP ? Exhaust Duct, GCMS ASSY OIL R-2, 1L, HS ? 20 Trap (Headspace Trap) With 90 Vial position sampler (Headspace sampler short transfer line Loop and Trap) ? AFC-2030 attachment kit for HS-20, AFC-2030, SPL, APC(AUX-3Ch)-2030, APC installation kit 1,2,3 ? APC install kit vent ? LabSolADD HS20 EN ? Labsol-EL HS-20 ? HS standard (FID)/ HS Trap standard (FID)/ 20ml HS-20 pressure release crimp clear vial kit (100 pcs) ? 20mm Crimper/ 20mm Decapper/ 20ml Vial (100pcs)/ Cap, Butyl/PTFE 200degC max. (100pcs) ? Heat -Resistant Septum 300deg Max for HS/ Aqueous solution of 1-butanol, 50 ng/uL ? HS-20 Automatic Switchover Cable (Between AOC-20i & HS-20) ? Graphite ferrules 0.5?..10/pkt [GC2030 only]/ Graphite ferrules 0.8??.10/pkt ? Capillary column ferrule set, 0.5mm (10pcs /pkt)/ Vespel Ferrule GVF-16-004 (10pcs/set) - For 0.25mm ID Column. ? Vespel Ferrule GVF-16-005 (10pcs/set) - For 0.32mm ID Column/ Nut, SS, NE16/012, (5 pcs/pkt) ? Inert Quartz Wool, 2gm/ Oil Mist Filter, EMF3/ Septum for injector, GCMS (50 pcs) ? Deactivated Insert with wool for Split & Splitless (Pack of 5) ? Ion Source Box, Heat Processed (EI)/ Repeller Assy, EI+/ Standard Sample, OFN 1pg/?l ? Standard Sample, OFN 100 fg/µL/ Standard Sample, OFN 100 pg/µL