Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
132624Bid Award Id
ViewTender No
81/CE/TSIIC/2018-19 Dated: 19.02.2019Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling with approved gravel in trenches, side of foundations and basement with inital lead of foundation in lead not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyence of water to site and all operall materials to site and wateatonal, incidental labour charges hire charges of T & P etc filling, all taxes, except GST, seigniorage charges etc., complete for finshed item of work.
237
102334
431.79
... More
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete, for fnished item of work (APSS NO.309&310)
326.14
9767
29.95
... More
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc excluding GST complete for finished item of work as per the approval of the Engineer-in-charge. (Pg-114, SD book).
316
104377
330.31
... More
Supply and placing of the M-25 Grade (with cement 380 kg per cum) Design Mix Concrete corresponding to IS 456 usingusing WEIGH BATCHER / concrete MIXER with attachment of weigh batcher with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate (River Sand) & 50% of Manufactured sand (Rock Sand) below 2.36 mm, water etc.,to site, including Seigniorage charges all operational,incidental and labour charges such as weigh batching,machine mixing,laying concrete,curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402) with minimum cement content as per IS code including pumping, centering,shuttering,laying concrete,vibrating,curing etc. excluding GST, complete for finished item of work as directed by the Engineer-in-Charge. for FOUNDATIONS, PLINTH, PEDESTALS
-
-
-
... More
Footings
65.29
540274
8275
... More
Columns work - upto Plinth level
8
84663
10582.98
... More
Plinth beam
17
210574
12386.73
... More
Supply and placing of the M-25 Grade (with cement 380 kg per cum) Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate (River Sand) & 50% of Manufactured sand (Rock Sand) below 2.36 mm,coarse aggregate, water etc.,to site, including Seigniorage charges all operational,incidental and labour charges such as weigh batching,machine mixing,laying concrete,curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402) with minimum cement content as per IS code including pumping, centering,shuttering,laying concrete,vibrating,curing etc. excluding GST, complete for finished item of work as directed by the Engineer-in-Charge. For Columns, Lintels
-
-
-
... More
Columns work - above Plinth level
18.3
206863
11304.02
... More
Lintel beams & Chajjas
7.4
83997
11351.06
... More
Supply and placing of the M-25 Grade (with cement 380 kg per cum) Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate (River Sand) & 50% of Manufactured sand (Rock Sand) below 2.36 mm ,coarse aggregate, water etc.,to site, including Seigniorage charges all operational,incidental and labour charges such as weigh batching,machine mixing,laying concrete,curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402) with minimum cement content as per IS code including pumping, centering,shuttering,laying concrete,vibrating,curing etc. excluding GST, complete for finished item of work as directed by the Engineer-in-Charge. For RCC slabs & Beams.
-
-
-
... More
Roof beams
18.45
195715
10607.91
... More
VRCC Slab work upto 150mm thickness
54.8
77155
1407.94
... More
For Stair case waist slab
2.1
12724
6059.24
... More
For Stair case Steps
1.8
10824
6013.8
... More
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm diameter for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and all other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126).
23.09
1538135
66614.8
... More
Brick Masonary with Fly ash brick Class 5 of size 290x225x140 mm in super structure, compound wall /super structure of buildings parapet walls with cement mortar (1:6) prop (Cement:sand) using 290x 225 x 140mm from approved source having minimum crushing strength of not less than5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of including seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., excluding GST, complete for finished item of work as per SS 504.
196
1265121
6454.7
... More
Reinforced Brick Masonry for partition walls in CM (1:6) prop.(Cement:Sand) using Fly ash cement/ lime solid blocks with compressive strength of 5 N/sq.mm - IS:12894-1990 - CLASS - 5 -225 x 100 x 60 mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work, excluding GST (APSS No. 509 & 501).
29
33144
1142.9
... More
Dadooing to walls with glazed full body Supply of glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and make set over a base coat of C.M (1:4) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of excluding seigniorage on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge , excluding GST.
55
46964
853.9
... More
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work.( In toilets) (APSS No.701 & 707)
29.5
24139
818.29
... More
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete all taxes except GST for finished item of work. (APSS No.701 & 707)
370
354334
957.66
... More
Providing skirting to internal walls to 10 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete all taxes except GST for finished item of work.(APSS No.701 &707).
15
14208
947.26
... More
Flooring with High polished granite 16 to 18mm of 1st quality approved premium colour (other than black) and shade set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost & conveyance of all materials to site, seigniorage charges, all labour charges, all incidental and operational charges, all taxes except GST etc., complete for finished item of work.
5.25
23808
4535
... More
Providing and fixing Window Sill, with 16 to 18mm thick pre- polished granite slabs of 1st quality approved premium colour(black or any approved color) and shade in single piece fixed on a bed of cement mortar 1:3, not more than 20mm thick, flushed with the finished surface of wall, inclusive of pointing joints with neat cement slurry with pigmented additives to match the shade of the stone, edges to be full round bull nosed and mirror polished including providing 6mm groove in plastering at the junction of granite and finished surface of wall including cost & conveyance of all materials to site, seigniorage charges, all labour charges, cutting charges, curing, all incidental and operational charges, etc., excluding GST, complete for finished item of work.
4.35
26005
5978.22
... More
Plastering to internal Walls with 12 mm thick for walls in two coats with base coat of 9mm thick in CM (1:6) and top coat of 3mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work, excluding GST. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
910.2
382010
419.7
... More
Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work, excliding GST. (SS 901,903 & 904) for:-Ceiling Plastering 2/c in CM (1:3) & (1:5): 12 mm
397.5
169692
426.9
... More
Plastering to walls with 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work excliding GST. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm
419.5
188816
450.1
... More
Painting to new walls with 2 or more coats of Acrylic interior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work , excliding GST, as per SS 912 for external walls for:-Interior Colouring - Plastic emulsion paint - 3 Coats
910.2
144084
158.3
... More
Painting with plastic emulsion premium grade synthetic polymer luxury / solvent based luster paint of superior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. (Asian/Berger/Nerolac or any approved brand) to Exterior faces of new walls two or more coats of approved make shade and colour over primer coat with cement primer water based exterior Gr-II (Asian/Berger/Nerolac) including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat, two or more coats of Plastic Emulsion paint etc., complete for finished item of work in all floors, excliding GST. External Painting .
419.5
100134
238.7
... More
Painting to Ceiling with two coats of white cement paint of apporved brand over a base coat of approved cement primer Grade-I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work , excluding GST
397.5
74650
187.8
... More
Painting to new iron works with 2 or more coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work, excliding GST, for:-Painting to iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer
31.4
4983
158.7
... More
Applying Priming coats with Primer of approved brand and manufacture, having low VOC content (volatile organic compound),with ready mixed red oxide zinc chromatic on steel works having low VOC content less than 250 gm/litre.
31.4
1325
42.2
... More
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections for two or more openable shutters 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding.The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and accessories for casement window – friction hinges of stainless steel grade 304/430- 2 Nos., per sash, handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete, excluding GST, for finished item of work.
11
87883
7989.4
... More
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete, excliding GST, for finished item of work.
2
13611
6805.5
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
12
60345
5028.76
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 95 mm x 60 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, including all over head and labour and other charges but excluding GST.
10.5
5667
539.8
... More
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, including all over head and labour and other charges but excluding GST. complete as per direction of Engineer-in-charge.
3.35
20763
6198
... More
Supply & Fixing of Single door with best Teak Wood frame of size 100X65 mm and Flush shutter of solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame to the wall with Fixtures of of 3 Nos of 125 mm long Brass Butt Hinges,1 Nos of 250 mm Long Brass Tower Bolt,2 Nos of 200 mm Long Brass Handle,1 No of Heavy Duty Mortice Locks,1 No of Aluminium Extruded Door Closure ,Rubber Beading Buffer and MS z hold Fasts as per approved drawing including Labour charges for wrought and put up and fixing in position, overheads and contractor's profit etc.,complete for finihsed item of work, excluding GST.
3.6
24565
6823.8
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
45
3003
66.74
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. except GST complete as per the direction of Engineer-in-charge
1.1
2481
2255.85
... More
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 0.40 litres per 10.00sqm of roof area, laid over roof slab when it is green, finished smooth with a floating coat of neat cement slurry and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorge charges,sales & all other taxes except GSTon all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
350
162284
463.67
... More
Supply , manufacture, making to specified design including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position, all incidental, operational, labour charges etc., excluding GST etc.,complete for finished item of work.
74.57
7182
96.32
... More
Providing and fixing Stainless Steel hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer, including cost of fixing in position, all incidental, operational, labour charges etc., excluding GST etc.,complete for finished item of work.
431
275296
638.74
... More
Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspendind the frame work using intermediate channels (45mm x15mm x15mm x0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mmx10mm x0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 51.5mm x26mmx10.5mmx0.55mm ) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound , two coats of dry wall top coat complete for finished item of work as per India Gypsum Ltd specification. including all incidental and operational ,labour charges bt excluding GST, complete for finished item of work for all floors and all levels
317
317317
1001
... More
Supplying and fixing aluminium composite cladding of approved make (Alucopanel, alucobonel, Reynobond, Lennox Durabuid, Alstrong legame, Alpolic, Alcomat, Alshine etc.,) with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk
116
428585
3694.7
... More
SANITARY
-
-
-
... More
Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2-2004 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity porcelain flushing tank with lid, internal components and fixed using required size of nails and screws, 15 mm brass , 2nos of teak wood blocks of size 76.2x101.60m angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, seignoriage charges, all labour charges, overheads & contractors profit etc., all taxes, except GST, complete for finished item of work
3
19796
6598.99
... More
Supply & fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of materials etc., complete for finished item of work excluding GST.
3
88
29.54
... More
Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar 550x400mmTap of 1st quality Indian make 400gms of Seiko/Senior/nice/ESSO or any approved brand heavy duty complete with standard CI brackets including wooden blocks ,1 No.15mm PVC connection with brass union nuts CP coated, 15 mm brass CP finish angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit, all taxes except GST for finished item of work
4
10827
2706.99
... More
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x457x2mm etc,complete for finished item of work including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
2635
658.97
... More
Supply & Fixing of Towel Ring Jaquar make Continental series, Chrome finish with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
4140
1035.03
... More
Supply & Fixing of Toilet paper holder Jaquar make Continental series,Chrome finish with 7 years warranty / Jupiter Aqua Lines-JALor equivalentseries including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
3172
793.08
... More
Supply & fixing of CP finish brass soap dish of approved make,including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
2068
517.1
... More
Supply & fixing Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty Chrome plated/ Jupiter Aqua Lines-JALor equivalent series including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
11671
2917.97
... More
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including cost and conveyance of materials etc., complete for finished item of work excluding GST.
4
3485
871.43
... More
Supply and fixing of 15 mm nominal size 152.0 mm CP finish iron body shower rose and make as specified in list of approved makes etc all complete as per specifications including cost and conveyance of materials etc., complete for finished item of work excluding GST.
1
192
192.01
... More
Providing & fixing UPVC SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials, jointing with adhesives, fixing vertical pipes over wooden battens including cost and conveyance of materials etc., complete for finished item of work excluding GST.
-
-
-
... More
110 mm dia
44
7982
181.41
... More
63 mm dia
32
2363
73.85
... More
Supplying and fixing 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings of standard make of ISI Brand including fixing in CM1:3 prop. including cost and conveyance of materials etc., complete for finished item of work excluding GST.
6
756
126.11
... More
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVCPipes and Fittings to meet the requirement of ASTM-D 2846 and are producedin CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of materials etc., complete for finished item of work excluding GST.
-
-
-
... More
CPVC Pipes of 22.20mm OD Pipe - SDR 13.5
12
1990
165.88
... More
CPVC Pipes of 28.60mm OD Pipe - SDR 13.5
10
2192
219.28
... More
CPVC Pipes of 34.90mm OD Pipe - SDR 13.5
18
5378
298.81
... More
CPVC Pipes of 41.30mm OD Pipe - SDR 13.5
26
9659
371.52
... More
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, all taxes, except GST complete for finished item of work.
4
2704
676
... More
Providing & fixing GM gate /ball valve as per IS standards including cost & conveyance of all material to work spot and all labour charges including fixing in position for finished item of work.20 mm dia. including cost and conveyance of materials etc., complete for finished item of work excluding GST.
-
-
-
... More
25mm dia
2
2542
1271.35
... More
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification, excluding GST .
3
25011
8337.07
... More
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg including cost and conveyance of materials etc., complete for finished item of work excluding GST.
2
14370
7185.01
... More
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of materials etc., complete for finished item of work excluding GST.
2000
14000
7
... More
Brick Masonry underground Sump
-
-
-
... More
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit, all taxes except GST complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
25
2427
97.08
... More
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorge charges,sales & all other taxes,except GST on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers, finishing top surface to the required level, curing etc.,complete and overheads & contractors profit, complete for finished item of work. (APSS No. 402).
3.2
12636
3948.91
... More
Brick Masonary with Fly ash brick Class 5 of size 290x225x140 mm in super structure, compound wall /super structure of buildings parapet walls with cement mortar (1:6) prop (Cement:sand) using 290x 225 x 140mm from approved source having minimum crushing strength of not less than5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of including seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., excluding GST, complete for finished item of work as per SS 504.
5.1
30197
5921.08
... More
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
11.4
18518
1624.4
... More
Plain Cement Concrete M 20 nominal mix using 20mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403) for bed of sump
0.5
2661
5322.5
... More
Providing impervious coat 20 mm(ave) thick to required slopes with CM (1:3) prop. using screened sand mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per o a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and cost of overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
35
16228
463.67
... More
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm diameter for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and all other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126).
0.15
9992
66614.8
... More
Brick Masonry underground Septic Tank
-
-
-
... More
Earth work excavation for Septic tank (open excavation) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308). in Ordinary Soil-Mannual Means-Upto 3M depth.
40
3883
97.08
... More
Plain Cement Concrete (1:4:8) proportion nominal mix cement:50% fine aggregate (River Sand) & 50% of Manufactured sand (Rock Sand) below 2.36 mm :Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate & manufactured sand below 2.36mm, coarse aggregate, water etc.to site,including seigniorage charges, machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing etc., excluding GST,complete for finished item of work as directed by the Engineer-in-Charge (APSS No. 402)
1.9
7502
3948.91
... More
Reinforced Brick Masonry for partition walls in CM (1:6) prop.(Cement:Sand) using Fly ash cement/ lime solid blocks with compressive strength of 5 N/sq.mm - IS:12894-1990 - CLASS - 5 -225 x 100 x 60 mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work, excluding GST (APSS No. 509 & 501).
8
47368
5921.08
... More
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
16
25990
1624.4
... More
Providing Plain Cement Concrete M 20 nominal mix using 20mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403)
0.9
4790
5322.5
... More
Providing impervious coat 20 mm(ave) thick to required slopes with CM (1:3) prop. using screened sand mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per o a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and cost of overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
57
26429
463.67
... More
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
0.2
13322
66614.8
... More
RCM facia 50mm thick using screened sand for baffle walls with rabbit wire mesh & nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing on both sides,including cost and conveyance of all materials to site,excluding seigniorage charges but including sales & other taxes on all materials,operationals &incidental,cost and conveyance of cement,wire mesh,water to work site, centering, scaffolding and form work,lift charges etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS NO.403&903)
6
12462
2077.11
... More
Compound Wall around the Enquiry Office Building
-
-
-
... More
Providing & fixing of Prestressed, Precast Compound wall as per the approved drawing with precast prestressed column of size 150mmx150mmx2700mm using M35 Design mix concrete with 7 no's of 4mm thick high tensional carbonised steel wire & precast prestressed slab of size 2130mmx300mmwidex50mmthick with M35 Design mix concrete using 4 no's 3mm high tensional carbonised steel wire including cost of earth work excavation for column foundation upto a depth of 0.9mt pit size 450mm dia bore hole filling with M20 Grade of Concrete including erection of columns, slabs, cost and conveyance of all materials to site, Seigniorage Charges, Labour cess, curing wherever needed, all incidental charges, hire and operational charges of all T&P excluding GST, complete for finished item of work.
100
322500
3225
... More
Internal Electrification system
-
-
-
... More
Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable, 1100V grade (ISI MARK) in existing pipe with following 6A modular type switch control with front plate, GI Deep box , 3-pin Ceiling rose/BH/SBH, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings,The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work..MAKES OF WIRES: (Finolex/RR Kables/KEI/Havells) Makes of switches: Legrand Arteor / Schneider Zen celo. One point controlled by one 6A switch
41
36326
886
... More
Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable, 1100V grade (ISI MARK) in existing pipe with following 6A modular type switch control with front plate, GI Deep box , 3-pin Ceiling rose/BH/SBH, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings, The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work..MAKES OF WIRES: (Finolex/RR Kables/KEI/Havells) Makes of switches: Legrand Arteor / Schneider Zen celo. Two point controlled by one 6A Switch
2
2420
1210
... More
Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 2-WAY 6A modular switch, 3-pin Ceiling rose/BH/SBH Modular switches with cover plate and GI deep box including all labour charges etc.,complete for 2-WAY LIGHT POINTS like stair case points The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. MAKES OF WIRES: (Finolex/RR Kables/KEI/Havells) Makes of switches: Legrand Arteor / Schneider Zen celo.
2
1784
892
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Makes of switches: Legrand Arteor / Schneider Zen celo.
10
6470
647
... More
Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on common board ,The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work..Makes of switches: Legrand Arteor / Schneider Zen celo.
10
4910
491
... More
Supply and Fixing of 25mm dia heavy grade,2.2 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work. The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.. for Run of mains, light, fan points, power points..
Make:Sudhakart ISI/Modi/Atul)
150
9600
64
... More
Supply and fixing 1 no. of 6/16A (5 pin) socket (Universal Type) with 1 no of 16A modular switch control mounted on GI box covered with modular cover plate The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. for erection of ups points Makes of switches: Legrand Arteor / Schneider Zen celo.
6
3816
636
... More
Supply and run of 3 runs (phase, neutral & Earth) of 36/0.3mm (2.5 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for circuits The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work..Makes : (Finolex/RR Kables/KEI/Havells)
280
30240
108
... More
Supply and run of 3 runs (phase, neutral & Earth) of 56/0.3mm (4.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work., for 16A sockets.Make:(Finolex/RR Kables/KEI/Havells)
100
15700
157
... More
Supply and run of 3 runs (phases, neutral & Earth) of 84/0.3mm (6.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.,(Finolex/RR Kables/KEI/Havells) .
80
17680
221
... More
Supply and laying of 2-pair telephone cable in the existing metallic/non metallic conduit pipe/Raceway with connections The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Makes:Delton/ Polycab
120
2880
24
... More
Supply and laying of 20 pair telephone wire in the existing metallic/non metallic conduit pipe with connections The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Makes:Delton/Polycab.
20
2000
100
... More
Supply and fixing of telephone jack type socket on MS box with modular plate cover with screws connections The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Makes: Legrand/schnider
8
2496
312
... More
Supply and fixing of 20 pair MDF krone pair box with MS enclosure with lock and key arrangement The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.Makes:Delton/Polycab.
1
1350
1350
... More
Supply,fixing,Installation and Testing of cat 6 RJ 45 information outlet with mount box The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Make:D Link/AMP/Krone/legrand.
8
3736
467
... More
Supply, Laying,Installation and Testing of cat 6 UTP cable The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Make:D Link/AMP/Krone/legrand .
120
4560
38
... More
Supply,fixing,Installation and Testing of 24 port patch panels The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Make:D Link/AMP/Krone/legrand.
1
7483
7483
... More
Supply and Fixing of 8 Way TPNDB with IP 43 Protection arrangement with 63 Amps 4P MCB with 63A 4P RCCB as Incomer and 24 Nos of 6-32A, SP MCB as out goers for Power distribution complete The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work..Makes:Legrand / Schneider.
1
16891
16891
... More
Supply, laying, of XLPE insulated,1100V grade Armored Aluminium LT cables of following sizes laid on wall/ cable trays/under ground The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.. Make:Torrent / Universal / CCI / Unicab.4Cx16Sqmm Ar, Al
50
9050
181
... More
Supplying and making end termination with Single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.with all materials The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.. 4C X 16 sq. mm (28mm)
2
500
250
... More
Providing independent earthing by exacavating a pit to a depth of 2.5Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 40mm dia 'B' class G.I pipe and 18" dia 3" thick hume pipe ring with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work., as per IS specifications 732/1982 (Part II)
2
8276
4138
... More
Supply & Installation of Earthing Material with required nut bolts, connections etc for the complete external electrification works. bolting, connections etc., The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.. 8 SWG GI Wire
10
387
38.78
... More
Supply and fixing of First Aid box 18" x 12" x 8"The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.
1
1367
1367
... More
Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV, The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.
3
12600
4200
... More
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism,
Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.. Make: Safex/Kenex/Cease Fire/Minimax
2
16720
8360
... More
Supply ,Transportation and Fixing of 36W Edge lit, 2' x2' (600mm x600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI 80, and THD is less than 15% etc., complete. The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.LUMINAIRE MAKE:Phillips / GE Venture / Wipro / Crompton / Bajaj / Havells /HPL / Syska LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
19
83296
4384
... More
Supply and transportation of 20W, 2000 lumens, T5 / T8,1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete. The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.LUMINAIRE MAKE: Phillips / GE Venture / Wipro / Crompton / Bajaj / Havells /HPL / Syska. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
38
42712
1124
... More
Supply and erection of Bulk head fitting with cast aluminium enamel painted body with water tight, clear glass with wire guard hinged with lock and key arrangements etc., complete.The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.Makes : Bajaj / Crompton / Surya.
6
2382
397
... More
Supply and erection of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator. The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.Makes : Crompton HS Decora / Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown / Usha technix decorative
10
28420
2842
... More
Supply of erection of 12" (300mm) Light duty exhaust fan with wire guard etc complete,The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work. Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air.
2
3692
1846
... More
Supply and erection of 1 x 11W Mirror light with all standard accessories diffuser ,The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.Makes : G.E. / Phillips / Crompton / Bajaj
2
1394
697
... More
Supply and transportation of 90WLED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover,IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F 0.90, System having efficacy 80 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load,Open Circuit, Miswiring, etc complete.The cost including all incidental and operational charges, Transportation , all labour charges, overhead charges & contrctor profit , all taxes Except GST etc., complete as directed by Engineer In Charge for finished item of work.LUMINAIRE MAKE : Capart/Polycab/GM/C&S/Promptec/Halonix/Stanjo/Panasonic/COSMO / PROLITE/ SCINTILLA / GOLDMEDAL/ RYON /Benlo. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs
4
39540
9885
... More
No. of Items : 136(One Hundred and Thirty Six) only
-
8708454
-
... More
(Rupees Eighty Seven Lakhs Eight Thousand Four Hundred and Fifty Four only)
-
-
-
... More
Note : 1) The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit. The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons and work insurance and no reimbursement for these will be made. The Rates given in schedule 'A' are excluding GST. 2)The above rates for finished items of work including cost and convenyance of all requisite materials to site, Seigniorage Charges, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc. excluding GST.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements