Telangana State Industrial Infrastructure Corporation Limited Tender

CC Road Gadwal;Providing gravel berms with good gravel obtained from outside to the required thickness including spreading in layers of 150 mm thick with side slope of 2:1(2H:1V), sectioning each layer to proper camber, watering, consolidation of each layer with vibratory roller of 8 to10 tonnes capacity to achieve desired density at OMC including cost conveyance of gravel, water etc., to site, labour charges for all operations, hire and operational charges of vibratory roller and other T&P diversion of traffic, etc., complete for finished item of work,as per MORT&H (5th Revision) Spc.No.401, excluding GST & Seignoriage Charges

CC Road Gadwal;Construction of un-reinforced, dowel jointed, plain cement concrete M30 Grade pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures of super plastisizer @ 0.50 percent by weight of cement, Admixture of Fosroc @ 2kg per cum and Mycro Synthetic fiber of 45mm length @ 4.00 kg/cum as per the approved, curing compound, finishing to lines and grades as per drawing and Technical Specification 602 MORTH as directed by the Engineer-in-Charge including loading ,unloading, all incidental and operational charges, including hire charges of T&P labour charges, all taxes but excluding GST etc., complete for finished item of work.

CC Road Gadwal;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } conforming to table 1000-2 of MORT&H specification including cost,conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges.