Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
378418Bid Award Id
ViewTender No
14/CE/TSIIC/2022-23, Dt:22.12.2022Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
FFC Dandumalkapur;Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).
403.33
-
237892.1
... More
FFC Dandumalkapur;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.
181.71
-
100999.87
... More
FFC Dandumalkapur;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 50 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work. (APSS No. 501 & 504).
19.6
-
160934.23
... More
FFC Dandumalkapur;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
10.67
-
982376.76
... More
FFC Dandumalkapur;Pump Room Slab 150mm
50.59
-
87391.19
... More
FFC Dandumalkapur;Pump room columns (350x250)mm
2.45
-
34804.43
... More
FFC Dandumalkapur;Tanks Slab 180mm
42.64
-
83583.78
... More
FFC Dandumalkapur;EQT ST CWT & TWT
114
-
509165.04
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RAFT
19.18
-
206592.38
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
13.21
-
63878.28
... More
FFC Dandumalkapur;Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308). Ordinary Soil - Mechanical Means up to 3m depth
220.94
-
27412.03
... More
FFC Dandumalkapur;LIFT Supply and installation of 1 No. 10 Passenger Machine room less elevator Elevator Type Passenger Elevator PWI10/10-19 Product I onospace No of Units Load & Capacity 680 kg or 10 persons Speed 1 m/s Stops & Openings 5 stops & 5 openings, Single entrance car Travel height 14.4 m Elevator Grouping Simplex Full collective Well Dimension 2000 mm width and 2000 mm depth (required) Head Room height, 4200 mm (required) Pit Height 1500 mm (required) MAP Floor Position Topmost floor Car dimensions 1200 mm wide x 1400 mm deep x 2200 mm high Door dimensions 800 mm wide x 2000 mm internal height Door type Two-panel Centre Opening Panel 4 Car design [TYP_CAR_DESIGN_SOLUTION (IMNSS21)] Car Panel Finish Stainless steel Hairline AISI441 Handrail Round Bend Handrail Stainless Steel at Rear Wall Ceiling & Lighting [TYP_CAR_CEILING(RL97F)] Stainless Steel Square Spot Light LED Flooring 20 mm Granite Stone by Customer, Car skirting material: Stainless steel Hairline AISI441 Car Door Finish Stainless steel Hairline AISI441, Floors 1-5 , Floor mark G, 1, 2, 3, 4, Interfloor distance 3600 mm, Landing door material Stainless steel AISI441, Car operating panel 1 Full Height Dark grey brushed StSt tempering glass Segmented LCD display Round flush mounted KDS96 , Landing Signalization Tempered glass Segmented LCD display Flush Mounted Tempered glass Round flush mounted KDS96, Standard Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door, Additional Emergency Rescue Device with audio announcer Three way intercom Nudging service Attendant Service Lift Announcer Square Spot Light LED. The cost includes conveyance of all materials to site, all opertaional and incidental charges, all labour charges, overheads & contractors profit etc., all taxes, except GST, complete for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make:Kone / Schindler / Mitsibuishi
1
-
1963500
... More
FFC Dandumalkapur;Supply of erection of 12" (300mm) Light duty exhaust fan with wire guard etc complete Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air.
24
-
58752
... More
FFC Dandumalkapur;Supply and transportation of 18-20W, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IBLED / Panasonic / Halonix / HPL / Syska /Eveready / Surya / Keselec/ FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
420
-
287700
... More
FFC Dandumalkapur;Supply and Fixing of 4 Way Horizontal TPNDB with IP 43 Protection arrangement with 40 Amps 4P MCB with 40A 4P RCCB as Incomer and 12 Nos of 6-32A, SP MCB as out goers for Lighting distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
35
-
570045
... More
FFC Dandumalkapur;Supply and fixing 1 no. of 6/16A (3/5 pin) socket (Universal Type) with 1 no of 16A modular switch control mounted on GI box covered with modular cover plate including cost and conveyance of all materials including all taxes,transportation and labour charges etc for erection of ups points Makes of switches: Legrand Arteor / Schneider Zen celo.
40
-
26640
... More
FFC Dandumalkapur;Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on common board including all taxes,transportation and labour charges.Makes of switches: Legrand Arteor / Schneider Zen celo (DATA NO: )
24
-
15504
... More
FFC Dandumalkapur;Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on Separate board including all taxes,transportation and labour charges.Makes of switches: Legrand Arteor / Schneider Zen celo (DATA NO: )
100
-
129200
... More
FFC Dandumalkapur;Supply and run of 3 runs (phases, neutral & Earth) of 84/0.3mm (6.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point including all taxes,transportation and labour charges etc.,Make:Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) /L&T / V-Guard (HFFR)
10
-
3110
... More
FFC Dandumalkapur;Supply and run of 3 runs (phase, neutral & Earth) of 56/0.3mm (4.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point including all taxes,transportation and labour charges etc., for 16A sockets. Make:Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
100
-
22300
... More
FFC Dandumalkapur;Supply,Laying of 3core, 4sq.mm 1.1kV FRLS, PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all taxes,transportation and labour charges etc., for UPS/ Raw power sockets in existing Raceways. Make:Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
100
-
21100
... More
FFC Dandumalkapur;Supply,Laying of 3core, 2.5sq.mm 1.1kV FRLS, PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all taxes,transportation and labour charges etc., for UPS/ Raw power sockets in existing Raceways. Make:Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
4725
-
741825
... More
FFC Dandumalkapur;Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but including modular plate etc. as required. Makes of switches: Legrand Arteor / Schneider Zen celo.
1
-
626
... More
FFC Dandumalkapur;Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 2-WAY 6A modular switch, 3-pin Ceiling rose/BH/SBH Modular switches with cover plate and GI deep box including all labour charges etc.,complete for 2-WAY LIGHT POINTS like stair case points including all taxes,transportation and labour charges MAKES OF WIRES: (Fnolex/RR Kables) Makes of switches: Legrand Arteor / Schneider Zen celo.
6
-
10206
... More
FFC Dandumalkapur;Two point controlled by one 6A Switch
220
-
341220
... More
FFC Dandumalkapur;Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable, 1100V grade (ISI MARK) in existing pipe with following 10A modular type switch control with front plate, GI Deep box , 3-pin Ceiling rose/BH/SBH, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including all taxes,transportation and labour charges.MAKES OF WIRES: Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard) Makes of switches: Legrand Arteor / Schneider Zen celo
50
-
56700
... More
FFC Dandumalkapur;Supply and Fixing of 32mm dia heavy grade,2.1 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Run of mains, light, fan points, power points.Make:(Sudhakart ISI/Modi/Atul)
800
-
99200
... More
FFC Dandumalkapur;Supply and Fixing of 25mm dia heavy grade,2.2 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Run of mains, light, fan points, power points. Make:Sudhakart ISI/Modi/Atul)
6760
-
757120
... More
FFC Dandumalkapur;Internal Electrical work Supply and Fixing of 20mm dia heavy grade,2.1mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes, transportation and labour charges etc., complete. for Telephone, LAN, PA,CCTV, other services. Make:Sudhakart ISI/Modi/Atul)
10
-
990
... More
FFC Dandumalkapur;Plain cement concrete M20 Grade using 40, 20 and 10mm mm size (SS 5) metal with machine mixing including cost and conveyanance of all materials like sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }conforming to table 1000-2), cement, coarse aggregate water etc, to site cost of labour charges for mixing, laying concrete for foundation tamping, vibrating, lifting, curing, finishing top surface for benching curbbing lintel and table drain but excluding, centering, shuttering charges and cost of steel and fabrication charges etc. complete for finished item of work (As per SS 402) excluding cost of seigniorage charges
157.22
-
888516.25
... More
FFC Dandumalkapur;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate {50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383} conforming to table 1000-2 of MORT&H specification including cost, seigniorage conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges
47.74
-
230851.54
... More
FFC Dandumalkapur;Excavation for Roadwork in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross?sections, and transporting to the embankment location within all lifts and lead upto 1000 m as per technical specification MORTH clause 301 (5th Revision). Excluding GST.Ordinary Soil - Mechanical Means up to 3m depth.
451.55
-
60309.02
... More
FFC Dandumalkapur;STORM WATER DRAIN Cleaning and grubbing jungle including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps, of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. MORTH Clause No. 201 (5th Revision).Excluding GST.
436.06
-
1687.55
... More
FFC Dandumalkapur;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of 24x24 MD 10 manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & tacking at site but excluding all taxes, as applicable.
8
-
19469.04
... More
FFC Dandumalkapur;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
1
-
92069.05
... More
FFC Dandumalkapur;Plain cement concrete 1:2:4 prop (concrete: fine aggregate:coarse aggregate) using 20mm size (SS 5) metal with hand mixing including cost and conveyanance of all materials like sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }conforming to table 1000-2), cement, coarse aggregate water etc, to site cost of labour charges for mixing, laying concrete for foundation tamping, vibrating, lifting, curing, finishing top surface for benching curbbing lintel and table drain but excluding, centering, shuttering charges and cost of steel and fabrication charges etc. complete for finished item of work (As per SS 402) excluding cost of seigniorage charges
7.56
-
36973.09
... More
FFC Dandumalkapur;Construction of RR masonry in CM (1:6) proportion using HG stone from approved quarry including cost and conveyence of all materials like cement, sand, water, garnite stone, etc., including laour for cutting stone to required sie and shape, mixing of cement mortar construction, scaffolding charges, etc., complete for finished item of work.except GST
57.83
-
283734.22
... More
FFC Dandumalkapur;Supply and laying of sand for filling and blindage including conveyence charges and filling in existing trench as per direction the direction of Engineer-in-Charge.except GST
43.2
-
110922.91
... More
FFC Dandumalkapur;Supply and delivery of 20 mm HBG metal (IS 383-1970) including conveyence charges and filling in existing trench as per direction the direction of Engineer-in-Charge.except GST
43.2
-
63181.3
... More
FFC Dandumalkapur;Supply and delivery of 40 mm HBG metal (IS 383-1970) including conveyence charges and filling in existing trench as per direction the direction of Engineer-in-Charge.except GST
108
-
136677.24
... More
FFC Dandumalkapur;RWHP Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
226.8
-
28139.08
... More
FFC Dandumalkapur;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.average of 15.00 mters for easy maintance, complete for finished item of work. (excluding GST)
20
-
317008.6
... More
FFC Dandumalkapur;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
192
-
39788.16
... More
FFC Dandumalkapur;Supply and laying of SWG SP-1 pipe conforming to ISI 651 - 14" dia (350 mm) SWR/SWG pipes as per drawing including cost and conveyanace of materilas to site, labour charges for laying including jointing ect all taxes complete for finished item of work.
210
-
610556.1
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
25.2
-
121857.12
... More
FFC Dandumalkapur;Earth work excavation for foundations for buildings in ordinary rock and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308).Ordinary Rock (not requiring Blasting) -Mechanical Means upto 3 m depth
18.9
-
6967.67
... More
FFC Dandumalkapur;SEWER LINE Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308).
378
-
46898.46
... More
FFC Dandumalkapur;Supplying, fixing of 54.0 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
30
-
20212.2
... More
FFC Dandumalkapur;Supplying, fixing of 41.30 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
60
-
27744.6
... More
FFC Dandumalkapur;Supplying, fixing of 34.90 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
80
-
29812.8
... More
FFC Dandumalkapur;Supplying, fixing of 28.60 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
80
-
21904.8
... More
FFC Dandumalkapur;Supplying, fixing of 22.20 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
260
-
59376.2
... More
FFC Dandumalkapur;WATER SUPPLY PIPE LINES Supplying, fixing of CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Supplying, fixing of 15.90 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
80
-
15088
... More
FFC Dandumalkapur;Supplying of PVC/SWR Pipe Clip of dia 160 mm including cost and conveyance of all materials etc complete
15
-
698.7
... More
FFC Dandumalkapur;Supplying of PVC/SWR Pipe Clip of dia 75 mm
10
-
204.5
... More
FFC Dandumalkapur;Supplying of PVC/SWR Vent Cowl of dia 75 mm
2
-
38.62
... More
FFC Dandumalkapur;Supplying of PVC/SWR Coupler of dia 75 mm
4
-
186.32
... More
FFC Dandumalkapur;Supplying of PVC/SWR Double Y with Door of dia 75 mm
1
-
171.56
... More
FFC Dandumalkapur;Supplying of PVC/SWR Double Y of dia 75 mm
1
-
132.93
... More
FFC Dandumalkapur;Supplying of PVC/SWR Single Y with Door of dia 75 mm
1
-
123.84
... More
FFC Dandumalkapur;Supplying of PVC/SWR Single Y of dia 75 mm
1
-
96.57
... More
FFC Dandumalkapur;Supplying of PVC/SWR Double Tee with door of dia 75 mm
2
-
515.82
... More
FFC Dandumalkapur;Supplying of PVC/SWR Double Tee of dia 75 mm
2
-
324.94
... More
FFC Dandumalkapur;Supplying of PVC/SWR Single Tee with Door of dia 75 mm
2
-
190.88
... More
FFC Dandumalkapur;Supplying of PVC/SWR Single Tee of dia 75 mm
2
-
154.52
... More
FFC Dandumalkapur;Supplying of PVC/SWR 45 degree Bend of dia 75 mm
10
-
511.3
... More
FFC Dandumalkapur;Supplying of PVC/SWR Door Bend of dia 75 mm
10
-
886.2
... More
FFC Dandumalkapur;Supplying of PVC/SWR Plain Bend of dia 75 mm
10
-
659
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.
4
-
1177.04
... More
FFC Dandumalkapur;Supplying & of PVC/SWR P-Trap(big with air vent) of 110 mm dia.
2
-
615.8
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Pipe clip of 110 mm dia.
8
-
190.88
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Vent Cowl of 110 mm dia.
2
-
50
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Coupler of 110 mm dia.
4
-
299.96
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Double Y with door of 110 mm dia.
1
-
298.81
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Double Y of 110 mm dia.
1
-
230.64
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Single Y with door of 110 mm dia.
1
-
221.55
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Single Y of 110 mm dia.
4
-
708.96
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Double Tee with door of 110 mm dia
2
-
763.5
... More
FFC Dandumalkapur;Supplying & of PVC/SWR Double Tee of 110 mm dia.
2
-
670.32
... More
FFC Dandumalkapur;Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.
2
-
336.3
... More
FFC Dandumalkapur;Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.
2
-
281.76
... More
FFC Dandumalkapur;Supplying of PVC/SWR 45 degree Bend of 110 mm dia
4
-
368.12
... More
FFC Dandumalkapur;Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia
5
-
698.75
... More
FFC Dandumalkapur;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia
20
-
2181.4
... More
FFC Dandumalkapur;Supplying and fixing of PVC/SWR 75mm dia Single Socket pipe
70
-
17136
... More
FFC Dandumalkapur;Sanitary Items Supplying and fixing of PVC/SWR. Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors Supplying and fixing of PVC/SWR 110mm dia Single Socket pipe
10
-
4902.1
... More
FFC Dandumalkapur;Supply, fixing & testing of 10 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Finolex / Million / Polycab / Havells / V-Guard / Gold Medal / GM
40
-
17920
... More
FFC Dandumalkapur;Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.. Makes; LT / LK / BCH / Crompton/ Siemens.
1
-
15335
... More
FFC Dandumalkapur;Fabrication , transportation, supply & fixing of suitable size panel board for single phase submersible motor above 2 Hp to 3 HP consisting of relay, Contactor, starting and running capacitors & cyclic operation, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes; LT / LK / BCH / Crompton/ Siemens.
1
-
15000
... More
FFC Dandumalkapur;PUMPS & EQUIPMENTS Supply, erecting & testing of 3.00HP Three phase open well ISI submersible motor pumpset.(65x50) Makes: Kirloskar / Crompton / Texmo / CRI / KSB. including all labour charges, all taxes etc complete for finished item of work as directed by the ENgineer - In- Charge ( 1 working + 1 standby)
1
-
38471
... More
FFC Dandumalkapur;CIVIL WORKS Supplying and Fixing of Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete of approved make, , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels - Gully traps AND Constructing Brick masonry chamber over the gully trap or peet valve and fitted with 304.8 x 228.6 m size CI frame and hinged cover.
1
-
821.89
... More
FFC Dandumalkapur;a) Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 32 mm NB Size Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
1
-
1893.96
... More
FFC Dandumalkapur;a)S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 32 mm NB Size, Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
4
-
3612.96
... More
FFC Dandumalkapur;VALVES a) S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indianmakeheavytype-50mmNBSize Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
1
-
4460.52
... More
FFC Dandumalkapur;Supplying and laying in position polythylene pipes as per IS 4984, PE100, PN6 including cost and conveyance of all material to work site, laying and jointing of HDPE pipes in ready made trench by butt fusion welding as per IS:7634 ? part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure, rectifying all leakages, including provision of flanges as and where required especially near to the valves as directed by Engineer-in-Charge etc., all complete for finished item of work ( PN ) 10 - 50 mm dia. - Inside the Bore Well
4
-
546.4
... More
FFC Dandumalkapur;Earth work excavation by Manual Means upto 3 mt depth for Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious material, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST as directed by Engineer-in-Charge etc., complete for finished item of work as per SS 20 B (APSS 308). Trenches
15
-
3871.05
... More
FFC Dandumalkapur;a) Supply, Fixing & testing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge - Bore Well to UG Sump
5
-
4274.2
... More
FFC Dandumalkapur;a) Supply, Fixing & testing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Municipal Supply to UG Sump.
5
-
3263
... More
FFC Dandumalkapur;a) Supply, Fixing & testing of 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
5
-
3973.1
... More
FFC Dandumalkapur;6" dia (150 mm) Double Socket
1
-
2847.87
... More
FFC Dandumalkapur;3" dia (76.2 mm) Double Socket
1
-
1523.12
... More
FFC Dandumalkapur;SOIL / WASTE PIPELINGS Supplying and Fixing of C.I. soil pipes with Double Socket ISI marked conforming to IS:1729-1979 of approved make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) including fixing of M.S. clamps if necessary with required no. of Bombaynails etc., including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels. for 4" dia (101.2 mm) Double Socket
1
-
1887.83
... More
FFC Dandumalkapur;Supply and Fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings etc. with solvent jointing as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
36
-
10822.68
... More
FFC Dandumalkapur;S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty as per approved drawing , including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
36
-
37833.84
... More
FFC Dandumalkapur;S&F Stainless steel liquid soap container wall mounted and bottle type near wash basins with necessaryfixing screws and clamps etc.,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels
33
-
17921.64
... More
FFC Dandumalkapur;S&F CP finish brass wall mounted towel ring,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels
33
-
24483.03
... More
FFC Dandumalkapur;S&F of 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 8931,as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
9
-
8155.71
... More
FFC Dandumalkapur;S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels ..:(Make :Jaquoar Equivalent)
36
-
139588.2
... More
FFC Dandumalkapur;Supplying & Fixing Oval shape basin white of Size 520 mmX 410 mm of make parryware or equivalent of 1st quality conforming to IS:2556-Part-4:1972 , 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931,CP finish brass body 32 mm dia nominal size waste coupling with half/full thread & brass check nut conforming to IS 2963: 1979,15 mm nominal size CP finish brass stop valve screw type with internal /external threaded conforming to IS 8931, 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 8931 ,bottle trap 250 mm long with wall connection pipe and Pipe connector ( with LIP ring) - UPVC/SWR Pipe as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .
33
-
204306.63
... More
FFC Dandumalkapur;S&F premium make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, and 10 years warrantyof approved make including all opertaional and incidental , labour charges, all taxes etc.complete for finished item of work in all respects:
1
-
17458.08
... More
FFC Dandumalkapur;PHE WORKS Sanitary & C.P Fixtures Supply, Installation and testing of approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
36
-
600048
... More
FFC Dandumalkapur;Providing and laying Vaccum Dewatered flooring of 150mm thick with M20 Design Mix cement concrete minimum 350 kgs of cement and 20 mm HBG graded aggregate, with top 12 mm thick wearing coat above 138 mm thick M20 laid in line & grade as per drawings and directions including shuttering, machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Industrial Shed. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 100 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge. The construction joint to be formed by cutting with mechanical saw in both direction at 5 m. interval the size of groove shall be 4 mm x 10 mm portion with polysulphide joint sealant be provided as directed by engineer-in-charge. Excluding GST & Seignoriage charges.
20.25
-
44592.93
... More
FFC Dandumalkapur;Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm and ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) Excluding GST
1
-
8240.79
... More
FFC Dandumalkapur;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage
20.25
-
11943.86
... More
FFC Dandumalkapur;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls.
82.62
-
20732.66
... More
FFC Dandumalkapur;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
82.62
-
21850.51
... More
FFC Dandumalkapur;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - Roof (Pump Room Ceiling) Excluding GST.
20.25
-
4514.33
... More
FFC Dandumalkapur;Plastering 12 mm thick to external surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. Internal Walls (SS 901,903 & 904)
62.37
-
32643.83
... More
FFC Dandumalkapur;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.(APSS 901,903 & 904)
62.37
-
34667.12
... More
FFC Dandumalkapur;Brick masonry in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504). Excluding GST & Seignoriage charges
9.51
-
80720.02
... More
FFC Dandumalkapur;Filling with useful borrowed earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
112.28
-
21143.45
... More
FFC Dandumalkapur;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
1.35
-
124293.22
... More
FFC Dandumalkapur;RCC Slab Bottom (150 mm thick)
20.25
-
34980.66
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20 mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) beams upto 2.20 m
1.86
-
24412.78
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Columns Ground Floor
1.87
-
26565.01
... More
FFC Dandumalkapur;Plinth Beam
1.24
-
16918.7
... More
FFC Dandumalkapur;Column Pedastals
1.05
-
12005.06
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Footings
3.24
-
34898.82
... More
FFC Dandumalkapur;Construction of RR masonry in CM (1:6) proportion using HG stone from approved quarry including cost and conveyence of all materials like cement, sand, water, garnite stone, etc., including laour for cutting stone to required sie and shape, mixing of cement mortar construction, scaffolding charges, etc., complete for finished item of work.
7.8
-
38269.53
... More
FFC Dandumalkapur;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate {50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383} conforming to table 1000-2 of MORT&H specification including cost, seigniorage conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges
8.9
-
43036.84
... More
FFC Dandumalkapur;PUMP HOUSE Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
117.3
-
14553.41
... More
FFC Dandumalkapur;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
199.63
-
7312.45
... More
FFC Dandumalkapur;Carting surplus earth to lead of 5km from the place of work excluding loading and unloading etc. and including all labour charges and transportation charges contractorprofit and overhead charges etc. complete. Except GST.
200.81
-
22812.02
... More
FFC Dandumalkapur;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cemen tmortar 1:3prop; ½? thick both insideand outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. Except GST.
1
-
9783.39
... More
FFC Dandumalkapur;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.
1
-
14126.89
... More
FFC Dandumalkapur;Manufacture as per BIS:12820/2004 with S.B.R. Quality Rubber conforming to BIS: 5382 / 85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in T.G . F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding taxes.
64
-
8071.04
... More
FFC Dandumalkapur;Supply and Delivery of D.I/C.I specials including cost of material Tax etc. complete Except GST.
901
-
138195.38
... More
FFC Dandumalkapur;Conveyance of Ductile Iron Pressure Pipes and accessories including loading at Factory, un-loading at site and stacking for the 100mm size
310
-
99.2
... More
FFC Dandumalkapur;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes.
350
-
499849
... More
FFC Dandumalkapur;Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubberinsertion, white lead including filling with water,with lead upto 500meter sand testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) Except GST.
2
-
531.16
... More
FFC Dandumalkapur;JointingC.I.,D.I.pipes and fittings with rubber gasket (push- on -joint) , excluding the cost of the gasket but including all sundries filling with water,with a water lead upto 500 m and testing to equired pressure, etc . complete Reference to specifications IS3114/1994/12888/1987 Except GST.
65
-
17685.85
... More
FFC Dandumalkapur;Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) - Except GST.
350
-
42532
... More
FFC Dandumalkapur;Barricading,hoarding,lighting and watching etc., for water supply and sewerage works for trenches of depths upto 6?-0? (2Meter) below G.L. Except GST.
350
-
56378
... More
FFC Dandumalkapur;Earth work excavation for foundations for buildings in ordinary rock and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308).Ordinary Rock (not requiring Blasting) -Mechanical Means upto 3 m depth
66.94
-
8774.17
... More
FFC Dandumalkapur;water supply lines 100mm Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. morth 304 - Except GST. Ordinary Soil - Mechanical Means up to 3m depth Morth 304 (3.13(i))
133.88
-
13294.28
... More
FFC Dandumalkapur;Providing and laying bituminous concrete of 40mm thick with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification complete in all respectsexcluding GST and seigniorage charges
39.03
-
426883.99
... More
FFC Dandumalkapur;Providing and laying 50mm thick dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading (grade-II), premixed with bituminous binder with VG-30 grade @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including hire and operational charges of all T & P, cost and conveyance of all materials, seigniorage charges, labour charges for all operations, diversion of traffic, etc., complete,except GST & Seigniorage charges, for finished item of work as per MoRTH (5th Revision) specification clause No. 505 complete in all respects.
48.79
-
469254.9
... More
FFC Dandumalkapur;Providing and applying Tack coat with Bitumen Emulsion rapid setting-1 over the prepared surface before laying DBM @2.5kg/10Sqm including cleaning the road surface with mechanical broom and air compressor and applying uniformity with the aid of emulsion pressure sprayer including cost and conveyance of bitumen emulsion, labour charges, cleaning, all taxes hire charges and operational charges of all T & P necessary to complete the finished item of work as directed by the Engineer-in-Charge as per MORT&H(5th Revision) specification503. excluding GST
975.75
-
13845.89
... More
FFC Dandumalkapur;Providing and applying Primer coat with bitumen emulsion(Bulk-Slow Setting-1) over the prepared surface of granular base as Wet Mix Macadam surface at the rate of 6kg /10sqm including cleaning the road surface with mechanical broom and air compressor and spraying uniformly with the aid of bitumen pressure sprayer including cost and conveyance of bitumen emulsion and water,labour charges,cleaning,all taxes hire charges and operational charges of all T&P necessary to complete the finished item of work as directed by the Engineer-in-Charge as per MORT&H(5th Revision) specification 502.excluding GST ,
975.75
-
57979.07
... More
FFC Dandumalkapur;Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including cost & conveyance of all material, hire and operational charges of T&P, labour charges for all operations, premixing the material with water at OMC in mechanical mix plant, carriage of material by tipper to site, laying in uniform layers with paver finisher in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including lighting, grading, barricading and maintenance of diversion of trafic, etc., complete for finished item of work, as per table 400.13 of technical specification clause 406 MORTH(5th Revision). excluding GST & Seignoriage Charges
151.37
-
339211.09
... More
FFC Dandumalkapur;Providing gravel berms to the required thickness including spreading in layers of 150 mm thick with side slope of 2:1(2H:1V),sectioning each layer to proper camber, watering, consolidation of each layer with vibratory roller of 8 to10 tonnes capacity to achieve desired density at OMC including cost conveyance of gravel, water etc., to site, labour charges for all operations, hire and operational charges of vibratory roller and other T&P diversion of traffic, etc., complete for finished item of work, as per MORT&H (5th Revision) Spc.No.401. Excluding GST & Seignoriage charges.
275
-
141174
... More
FFC Dandumalkapur;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved including plasticizer @0.5% by weight of cement, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all material, labour charges for all operations, hire and operational charges of all T&P, diversion of traffic etc. complete for finished item of work as per drawing and Technical Specification Clause 1501 MORD.Excluding GST and Seigniorage Charges
150
-
1155673.5
... More
FFC Dandumalkapur;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate {50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383} conforming to table 1000-2 of MORT&H specification including cost, seigniorage conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges
120
-
580272
... More
FFC Dandumalkapur;Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 (50% of 53mm to 9.5mm , 20% of 9.5 to 2.36mm and 30% of 2.36mmm below)including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401(5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels)
120
-
233670
... More
FFC Dandumalkapur;Compaction of original ground with maximum of six passess of vibratory power road roller including filling in depression occuring during rolling as per MoRTH specification No.305 .3.4 complete and as directed by the Engineer - in - Charge.Excluding GST
750
-
88635
... More
FFC Dandumalkapur;Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transporting to site spreading, grading to required slope and compacting to meet requirement of Table 300-2 including all labour charges, hire& operational charges complete for finished item of work, MORTH Clause 305 (5th Revision). Payment will be based on levels for finished item of work. Excluding GST
380
-
171976.6
... More
FFC Dandumalkapur;Construction of embankment / subbase with useful excavated soils obtained from Road, drains and Culverts by mechanical means and spreading in layers not more than 200mm thick each or as directed by the Engineer-in-Charge including pre-watering soil, removal of top soil, excavation of soils, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory roller of 8 to 10 Tonnes capacity @ OMC compaction to meet requirement of table 300.1 and 300-2 of MORT&H including labour charges for all operations, hire and operational charges of T&P, all water leads duly maintaining the required camber in the formation etc., excluding GST, complete for finished item of work as per MORTH Specification clause 305 (5th Revision) (Payment will be made based on level for finished item of work). Excluding GST
600
-
84450
... More
FFC Dandumalkapur;Excavation for Roadwork in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross?sections, and transporting to the embankment location within all lifts and lead upto 1000 m as per technical specification MORTH clause 301 (5th Revision). Excluding GST
930
-
124210.8
... More
FFC Dandumalkapur;INTERNAL ROADS Cleaning and grubbing jungle including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps, of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. MORTH Clause No. 201 (5th Revision).Excluding GST
1694
-
6555.78
... More
FFC Dandumalkapur;Raised Pointing with CM (1:3) to RR Masonry including cost and conveyance of the material as per directed by engineer - in charge.including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc.,
840
-
106528.8
... More
FFC Dandumalkapur;Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type B - Glidden Type Designation as per standard specification including contractors profit & over heads but excluding seignorage charges and GST etc.,
81.6
-
9456.62
... More
FFC Dandumalkapur;Mild Steel Tubes & pipes of all Diameters as per IS-1161 Labour charges for fabricating all structural steel works like heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc.,
816
-
101053.44
... More
FFC Dandumalkapur;Construction of RR masonry in CM (1:6) proportion using HG stone from approved quarry including cost and conveyence of all materials like cement, sand, water, garnite stone, etc., including laour for cutting stone to required sie and shape, mixing of cement mortar construction, scaffolding charges,including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete for finished item of work.
581.04
-
2850785.6
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete, for finished item of work. (APSS No. 402) for basement
19.22
-
92940.23
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402) for foundation
45
-
217602
... More
FFC Dandumalkapur;Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310).
110.16
-
38517.44
... More
FFC Dandumalkapur;Earth Work Excavation in Ordinary Rock (not requiring Blasting) by Manual means upto 3 m depth including breaking rock and depositing on bank for all lifts and with an initial lead including all operational,labour charges such as shoring,sheeting,planking, strutting etc.,for finished item of work excluding dewatering charges etc., as per technical specification clause 301MORTH (5th Revision) excluding GST
27.54
-
10152.9
... More
FFC Dandumalkapur;RR MASONRY COMPOUND WALL Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308).
523.26
-
64920.87
... More
FFC Dandumalkapur;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
20.6
-
3651.14
... More
FFC Dandumalkapur;Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).
4.6
-
2713.17
... More
FFC Dandumalkapur;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126
1.15
-
105879.41
... More
FFC Dandumalkapur;Roof Beam
0.48
-
6206.71
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Top Slab 200 mm thick
4.83
-
10157.44
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) side walls-300 mm thick
16.76
-
73855.62
... More
FFC Dandumalkapur;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Bottom slab-300 mm thick.
4.83
-
13605.24
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
0.44
-
2127.66
... More
FFC Dandumalkapur;Septic Tank Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308). for Ordinary Soil - Mechanical Means
32.08
-
3980.17
... More
FFC Dandumalkapur;Second Floor
14.38
-
86606.43
... More
FFC Dandumalkapur;First Floor
14.38
-
86606.43
... More
FFC Dandumalkapur;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work. Ground Floor
14.38
-
86606.43
... More
FFC Dandumalkapur;Second Floor
14.83
-
66771.19
... More
FFC Dandumalkapur;First Floor
14.83
-
66691.99
... More
FFC Dandumalkapur;Risers of 0.15 m height: Ground Floor
14.83
-
65900.81
... More
FFC Dandumalkapur;Second Floor
26.96
-
181240.49
... More
FFC Dandumalkapur;First Floor
26.96
-
181003.51
... More
FFC Dandumalkapur;Staircase Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Treads of 0.30m wide: Ground Floor
26.96
-
178632.65
... More
FFC Dandumalkapur;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work for Basement. (APSS No. 402)
13.63
-
65909.23
... More
FFC Dandumalkapur;S&F of pre-cast RCC Grills of any design of 50 mm thick manufactured with M-30 grade of concrete using vibro-compaction process using joint less FRP moulds to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation & erection etc.,
357
-
259992.39
... More
FFC Dandumalkapur;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including costof hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec:1108
172.8
-
869923.58
... More
FFC Dandumalkapur;Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered UPVC sections with TPV gaskets for sash & glazing bead shall be co-extruted with grey color soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm X 2.4 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm X 2.4 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm X 2.4 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of Profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
22.68
-
232271.78
... More
FFC Dandumalkapur;Providing and fixing of Polyvinyl chloride (PVC) Doors with a Frame size of 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet metre cut at two corners and joined with two numbers of 150 mm long brackets of 15X15 mm MS square tube. The two vertical door profiles are to be reinforced with 19X19 mm MS square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100 mm long MS screws through the frame by using PVC fastners. A minimum of 4 Nos. of screws to be provided for each vertical member & minium two Nos. for horizontal member, etc complete as per manufacturer's specification and direction of Engineer-in-Charge for finished item of work. TBSC-L.I-03
56.93
-
226315.54
... More
FFC Dandumalkapur;Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm and ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
36.23
-
263765.27
... More
FFC Dandumalkapur;Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).
1321.93
-
848480.77
... More
FFC Dandumalkapur;Second Floor
78.84
-
74556.62
... More
FFC Dandumalkapur;First Floor
78.84
-
74463.59
... More
FFC Dandumalkapur;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) Ground Floor
78.84
-
73536.43
... More
FFC Dandumalkapur;Second Floor
41.8
-
41594.76
... More
FFC Dandumalkapur;First Floor
41.8
-
41394.96
... More
FFC Dandumalkapur;Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work. Ground Floor
41.8
-
39397.75
... More
FFC Dandumalkapur;Second Floor
81.01
-
94306.17
... More
FFC Dandumalkapur;First Floor
45.63
-
52901.14
... More
FFC Dandumalkapur;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707) Ground floor
66.98
-
74452.29
... More
FFC Dandumalkapur;Second Floor(50mm thick)
1307.4
-
1676426.72
... More
FFC Dandumalkapur;First Floor (50mm thick)
1307.4
-
1676426.72
... More
FFC Dandumalkapur;Providing and laying Vaccum Dewatered flooring of 50mm thick with M20 Design Mix cement concrete minimum 350 kgs of cement and 20 mm HBG graded aggregate, with top 12 mm thick wearing coat above 38 mm thick M20 laid in line & grade as per drawings and directions including shuttering, machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Industrial Shed. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 100 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge. The construction joint to be formed by cutting with mechanical saw in both direction at 5 m. interval the size of groove shall be 4 mm x 10 mm portion with polysulphide joint sealant be provided as directed by engineer-in-charge. Excluding GST & Seignoriage charges. Ground Floor 125MM THICK
1368.03
-
2697960.36
... More
FFC Dandumalkapur;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls.
9788.09
-
2456223.3
... More
FFC Dandumalkapur;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
5885.2
-
1556458.84
... More
FFC Dandumalkapur;Second Floor
1290.48
-
318309.8
... More
FFC Dandumalkapur;First Floor
1290.48
-
302591.75
... More
FFC Dandumalkapur;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - Roof (Pump Room Ceiling) Ground Floor
1290.48
-
287686.71
... More
FFC Dandumalkapur;Terrace
112.23
-
30850.9
... More
FFC Dandumalkapur;Second Floor
1966.21
-
538249.99
... More
FFC Dandumalkapur;First Floor
1894.98
-
516590.5
... More
FFC Dandumalkapur;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Ground Floor
1911.78
-
499337.82
... More
FFC Dandumalkapur;Terrace
112.23
-
55263.17
... More
FFC Dandumalkapur;Second Floor
1966.21
-
952569.76
... More
FFC Dandumalkapur;First Floor
1894.98
-
903033.77
... More
FFC Dandumalkapur;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Ground Floor
1911.78
-
867374.59
... More
FFC Dandumalkapur;Supplying and fixing of unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision - (only two glass shutters) duly manufactured using UPVC reinforced profiles (composition of profile shall consists a minimum of 5.5 PHR of TIO2 and not more than 12 PHR of CaCo3 for every hundred parts of PVC resin) of (80mm X 52mm) /(94mm X45mm) X 2.20 mm for outer frames, (54mm X 38mm) X2.20 for sliding shutter frames capable of mounting singgle glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with grey color TPV Gasket for sash & Glasing bead shall be co-extruded with Grey color soft PVC. System shall have single point locking with Touch lock and the system is to be installed at the site using anchor fastners, sillicon rubber sealant, easy glazing /deglazing at site, etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Except GST.
216.3
-
1571813.17
... More
FFC Dandumalkapur;Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidnetal, operational and labour charges complete for finished item of work.
296.64
-
40701.97
... More
FFC Dandumalkapur;Painting Priming Coat on new Iron Works with Zinc Chromate Yellow Oxide Primer
296.64
-
24638.92
... More
FFC Dandumalkapur;Providing and fixing welded MS grills with MS 12 mm square bars for window / ventilator openings including welding and rounding the noces and grinding smooth the joints and fixing with necessary screws, bolts including two coats of first quality synthetic enamel paint over a coat of zinc cromate primer, etc., complete for finished item of work, including cost of all incidentals and T & P as directed by Engineer-in-Charge. Except GST.
6289.74
-
866789.07
... More
FFC Dandumalkapur;Construction of Precast RCC Factory Building (G+2) including Design, Production, Transportation and Erection consisting of Precast Wall panels of 175 mm thick , internal walls and partitions with AAC Blocks. Precast Columns, Precast Beams, Precast structure for Staircases with 150 mm Riser and 300 mm Thread , Precast Solid Slabs of 150 mm thick for Lintals / Chajjas (Sunshade), Precast Hollow Core Slabs for Roof Slabs and Cast In Situ Foundation works /RCC Water Tank works. Cast in situ Foundation shall be based on Structural design taking into consideration the Soil Bearing Capacity (SBC) of 15 tonnes/sqm and for a uniformly distributed load (UDL) of 10 KN. at a depth of 3.0m from EGL. Total Area of Factory Building (GF+FF+SF=1413.88 + 1337.06 + 1337.06 = 4088 SQM), Job work (Including for variation of 21.20 Sqm)
4109.2
-
70769710.79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements