Telangana State Industrial Infrastructure Corporation Limited Tender

street lights;Supply and laying of 8SWG GI wire including cost and labour charges etc., complete along with UG cable for earthing including cost and conveyance of all materials, labour charges etc., complete exlcuding GST and work is to be carried out as per the specifications and requirement of site conditions and as per the directions of the Engineer-in charge (DATA-10)

street lights;Supply and fixing of suitable out door feeder pillar box of suitable size made with 14SWG CRCA sheet for Main frame and 16 SWG for doors and inner partitions with double door arrangement, making powder coating after processing of 7 Tank process, lock and key arrangements with hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with providing cement concrete, including Supply and fixing of Legrand / Schnieder make 40A-63A, 4 Pole MCB as incomer, 6 Nos 6-32A SP MCBs as out goings,indication lamps, din channel, 6 Sqmm 3core copper cable for invidual light Supply and fixing of connectors, bus bars,shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch including Supply and fixing of Automatic Street Light Control System with Optical Sensor,Low volatage / High voltage trip and reset, operating voltage 380 - 450 V AC,50 HZ with suitable SMC enclousure of IP 54 protection, and Contactor suitable to control the load of 8KW Three phase load including cost and conveyance of all materials, labour charges etc., complete exlcuding GST and work is to be carried out as per the specifications and requirement of site conditions and as per the directions of the Engineer-in charge.Make for MCBs- Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora, Make for Nature Switch-Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj (DATA-9)

street lights;(c)3.5 core, 50sqmm

street lights;(b)3.5 core, 25sqmm

street lights;Supply and erection of double crimping Aluminium cable lugs suitable for following U.G armoured Aluminium cables with including labour charges etc., complete excluding GST and work is to be carried out as per the specifications and requirement of site conditions and as per the directions of the Engineer-in charge.Make- DMI / Jainson / Dowels or equivalent make as approved by the department (DATA-8) (a) 4 core, 16sqmm

street lights;(c)3.5 core, 50sqmm

street lights;supply and erection of heavy duty type single compression brass cable glands(b)3.5 core,25sqmm

street lights;(c) 3.5 Core 50 sqmm UG cable

street lights;(b) 3.5 Core 25 sqmm UG Cable

street lights;Supply, laying and testing of the following size XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete excluding GST and work is to be carried out as per the specifications and as requirement of site conditions and as per the directions of the Engineer-in charge. Makes :Torrent /Universal / Polycab / Havells /Fortune Art/ KEI (DATA-6) (a) 4 Core 16sqmm UG Cable

street lights;(b) Outer dia 63mm and Inner dia 51mm

street lights;Supply and laying of the following size double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II in existing cable trench with necessary HDPE fittings for protection of 1.1 KV grade U.G cable including cost and conveyance of all materials, labour charges etc., complete exlcuding GST and work is to be carried out as per the specifications and requirement of site conditions and as per the directions of the Engineer-in charge. (Makes: Bajaj / Gamson / Ultra Plus / CPE) (DATA-5) (a) Outer dia 50mm and Inner dia 38mm

street lights;Earth excavation of Cable trench of required size in hard ground soil for laying of any required UG cable in the trench and back filling of Trench etc., complete including labour charges etc., complete excluding GST and work is to be carried out as per the all specifications and requirement of site conditions and as per the directions of the Engineer-in charge. (DATA-4)

street lights;Supply, transportation and fixing of 150W +/-10% (>=15000 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by thedepartment and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with warranty 50,000 burning hours. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.and and supply and laying of XLPE/PVC insulated 3 core 1.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990 Cable including cost and conveyance of all materials and labour charges etc., complete excluding GST Make :Finolex / Havells / Polycab / RPG / KEI / Fortune Arrt. LUMINAIRE MAKE: PHILIPS / CROMPTON / BAJAJ / Halonix /HAVELLS / POLYCAB / SURYA / SYSKA / Capart LED MAKE : PHILIPS LUMILEDS / / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. (DATA-3)

street lights;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155mm, Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x750mm long 'J' bolts along with template or equivalent including Fabrication, Transportation and supply of 1.5 Mtr sword type or any decorative Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe etc complete including cost of 6A SPMCB B/C Curve with breaking capacity 10KA including all labour charges and cost and conveyance of materials etc. complete excluding GST Makes: BAJAJ / VALMONT / TRANSRAIL /SKIPPER / UTKARSH / LAASMA / CONSOUL .Make for MCB-Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora (DATA-2)

street lights;Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtrx0.60Mtrsx1.40 Mtr size M20 cc vibrated concreting mixing with necessary steel (Minimum 15kgs) reinforcement as directed by the field engineers during execution including centering, decentering water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete excluding GST (DATA-1)