Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 1,14,45,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Tender for Construction of Additional Works Like Civil, Interiors, Mep Interior & Exterior Services and Landscaping for T-hub (Phase-ii)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
142519Bid Award Id
ViewTender No
18/CE/TSIIC/2019-20, Dated: 30.08.2019Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System of size 600 x600 x20mm ,with Dune Max Beveled Tegular Edge Tiles with Armstrong Silhouette 15mm Exposed grid. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥84%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) with sand texture finish Dune Max in module size of 600x600x20mm, suitable for Green Building application, with Recycled content of 49%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 7.90 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty. Installation : To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum etc.,as per approved drawing colour and shade by Engineer in charge, including cost of access scaffolding , all incidental and operational charges, Transportation ,labour charges and all taxes Excluding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
4000
-
1232.72
Supply, fixing and Installation of Wooden Grid Ceiling in module of size 128mm x 2440mm x 15mm and density of 830 Kgs/M3 works SL2 edge Suspended Ceiling System. The tiles with visual pattern G14 or any equivalent channel with approved Wood Veneer (Maple, Dark Bamboo, Red beech, US Cherry) finish would have an NRC of 0.7, Humidity Resistance (RH) of 90%, Fire Performance Class 1(BS - 476).The grid with web height of 38 mm and 24mm wide Prelude 38 section flanges.The grid shall have a load carrying capacity of 15.5 Kgs/M. The Sections have a Galvanizing of 90 grams per M2 having pull out strength of 100 Kgs.
-
-
-
Installation: Using the C-Channels of size 3000 mm Long spaced with 1200 to 1500 mm with predrilled at every 600 mm and the first and last at 300 mm spacing. The C Channel securely fixed to the structural soffit by using C-channel hangers and min.6mm dia threaded rod & approved hangers. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector splice for joining two pieces of C-channels. T Bar Suspension clips to be screwed in each of the predrilled holes on the C Channel using a 12mm self tapping screw. The main runner to be suspended by passing it through the T bar suspension clip. The 600mm stabilizer bars to be placed at the bulb of the main beam at every 1200mm. The 300 mm x 1200 mm Woodworks tiles to be laid by sliding SL2 edge of the tile on the main runner which is spaced at 600mm. Perimeter trim to be axiom trims, powder coated matt black, secured at 450mm maximum center to center distance.
-
-
-
Suspension system: Using with the M6 Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26mm x 26mm x 25mm x 1.2mm with a Galvanized Thickness of 80gsm, a pre Straightened Hanger wire of dia – 2.65 mm of 1.8 m length, thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner to facilitate the any ducts, socket, junction boxes for electrical requirements as per approved drawing and as directed by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer In-Charge for finished item of work for all floors and at all levels
220.00000000000003
-
5501.24
Supply and Installation of Spark Aluminium Baffles in Wooden Texture Ceiling of Size 75x50x3660 mm of 1.5 mm thickness ,accessories for installation baffle hanger,black spring, Channel Carrier, GI Rod Anchor Fastener.Sound attenuation 45 DB and thermal reitance 1.14m2/kwSurface Treatment ; Brushed, Roll Coated, Spray Painted Humidity Resistance : 100% RH,Fire proof ,Noncombustible GB8624,Class A, Fire proof B 1 grade, damp resistance, temperature resistance & Sound Absorption, No radiation , etc, ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . S
1500
-
9645.46
Supply and Installation of Free suspended Ceilings of using Topoiq Soniq structure with single layer mineral wool soft acoustic board of 40 mm thickness with surface texture fleece coat on all sides and shape with round,Floating effect due to set back fixing points .Mineral Wool acoustic panel of Soft mineral wool acoustic panel. Third party certified bio-soluble bio-degradable mineral wool.• Fire protection class according to DIN EN 13501-1: A2-s1, d0• Sound absorption: EN ISO 354 • Humidity resistance: up to 95% relative humidity• Size: 1200 mm/900 diameter, single piece/frameless joint-free• Thickness / Weight: 40 mm/(approx. 5,6 kg/m²)• Edge Detail: straight edge• Color white, RAL Code 9010 Fastening and guide (ceiling) profile The panels to be suspended individually using the AMF hanger kit, Hilti Plugs, aircraft suspension cables 1m long and bottom end cable adjusters. etc, ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .(Make: AMF /Equivalent) S
-
-
-
900x900 mm of Square
90
-
12497.65
750 mm Dia Circuar
107
-
11929.58
600x750 mm Hexagon Shape
70
-
12497.65
Flooring
-
-
-
Flooring with digital / polished glazed full body porcelain vitrified tiles with approved type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and of size 1000x 1000 mm and thickness between 12-15 mm,1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as directed by the Engineer-In -Charge, laying tiles, set over a base coat of CM (1:8) prop. 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth including all incidental and operational ,transportation ,labour charges including all taxes Excluding GST & seigniorage charges, but including cost and conveyance of all materials like cement, sand, Crushed stone sand, water, tiles, Laticrete -SP100, etc., to site including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707)
-
-
-
Ground Floor
460
-
2214.76
First Floor
160
-
2262.5
Second Floor
325
-
2310.24
Third Floor
1850
-
2357.98
Fourth Floor
2100
-
2405.71
Fifth Floor
90
-
2453.45
Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 -10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth , including cost & conveyance of all materials like cement, River sand,Crushed stone sand, water and tiles, overheads & contractors profit all taxes Excluding GST & seigniorage charges etc., complete for finished item of work. (APSS No.701 & 707)
-
-
-
Ground Floor
60
-
1600.39
First Floor
60
-
1648.12
Second Floor
60
-
1695.86
Third Floor
120
-
1743.6
Fourth Floor
120
-
1791.34
Fifth Floor
120
-
1839.08
Sixth Floor
120
-
1886.82
Seventh Floor
120
-
1934.56
Eight Floor
120
-
1982.3
Ninth Floor
120
-
2030.04
Tenth Floor
120
-
2077.78
Proviiding Dadooing to walls with glazed full body glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and make set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with Laticrete -SP100 paste mixed with pigment of matching shade of the tiles, including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 , water, tiles, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work .
-
-
-
Ground Floor
120
-
1339.67
First Floor
120
-
1351.46
Second Floor
120
-
1363.24
Third Floor
225
-
1375.03
Fourth Floor
225
-
1386.82
Fifth Floor
225
-
1398.6
Sixth Floor
225
-
1410.39
Seventh Floor
225
-
1422.18
Eight Floor
225
-
1433.96
Ninth Floor
225
-
1445.75
Tenth Floor
225
-
1457.54
Flooring with High Polished Granite up to 8'-00 (2.43 M) other than black/ premium colours of thick 16-18 mm in single piece with edges flat nosed set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, tiles, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work (APSS No.701 & 707)
-
-
-
Granite for Landings
-
-
-
Lower Basement
125
-
4732.05
Upper Basement
175
-
4732.05
Ground Floor
80
-
4732.05
First Floor
60
-
4820.01
Second Floor
60
-
4907.97
Third Floor
60
-
4995.93
Fourth Floor
60
-
5083.89
Fifth Floor
80
-
5171.85
Sixth Floor
60
-
5259.81
Seventh Floor
60
-
5347.77
Eight Floor
60
-
5435.73
Ninth Floor
60
-
5523.69
Tenth Floor
80
-
5611.65
Supply &Fixing High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ premium colours in single piece with edges flat nosed set over a base coat of CM (1:3) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, tiles, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work for Risers (APSS No.701 & 707)
-
-
-
Risers
-
-
-
Lower Basement
45
-
4436.8
Upper Basement
65
-
4436.8
Ground Floor
32
-
4436.8
First Floor
26
-
4495.79
Second Floor
26
-
4554.79
Supply &Fixing with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black/ premium colours in single piece with edges Rounded and set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm,3nos of Grooves including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Granite, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying granite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work for Threads (APSS No.701 & 707)
-
-
-
Threads
-
-
-
Lower Basement
87
-
7757.35
Upper Basement
128
-
7757.35
Ground Floor
62
-
7757.35
First Floor
51
-
8144.85
Second Floor
51
-
8532.34
Supply &Fixing of High Polished Granite up to 8'-00 (2.43 M) other than black/ premium colours of thick 16-18 mm in single piece with edges flat nosed set over with full depth jointing flooring for grout/synthetic/resin based adhesive in 3-5 mm thick , including cost and conveyance of all materials like Granite,Jointing material, water, etc., to site, all operational and incidental charges, labour and lift charges on all materials, and all labour charges for,jointing, laying granite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work.Risers (APSS No.701 & 707)
-
-
-
Risers
-
-
-
Third Floor
26
-
4409.09
Fourth Floor
26
-
4443.64
Fifth Floor
38
-
4478.2
Sixth Floor
26
-
4512.76
Seventh Floor
26
-
4547.32
Eight Floor
26
-
4581.88
Ninth Floor
26
-
4616.44
Tenth Floor
26
-
4651
Supply &Fixing with High Polished Granite up to 8'-00 (2.43 M) other than black/ premium colours of thick 16-18 mm in single piece with edges flat nosed set over with full depth jointing flooring for grout/synthetic/resin based adhesive in 3-5 mm thick , with 3 Nos of grooves with 2-3 mm,including cost and conveyance of all materials like Granite,Jointing material, water, etc., to site, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying granite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work Threads (APSS No.701 & 707)
-
-
-
Threads
-
-
-
Third Floor
51
-
6094.88
Fourth Floor
51
-
6238.68
Fifth Floor
72
-
6382.49
Sixth Floor
51
-
6526.29
Seventh Floor
51
-
6670.09
Eight Floor
51
-
6813.89
Ninth Floor
51
-
6957.69
Tenth Floor
51
-
7101.5
Flooring with Polished shahabad stones 15- 18 mm thick set over base coat of CM(1:8) over already laid CC Bed/Roof slab,including neat cement slurry of honey like consistency spread at the rate of 3.30 Kgs of cement per sqm and jointed with neat cement,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm and water and flooring stones etc., including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, stone, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying shahabad stone to level, curing all taxes, Excludingt GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work
-
-
-
Ground Floor
65
-
668.46
First Floor
135
-
707.43
Second Floor
135
-
746.39
Third Floor
135
-
785.36
Fourth Floor
135
-
824.32
Fifth Floor
135
-
863.29
Sixth Floor
135
-
902.25
Seventh Floor
135
-
941.22
Eight Floor
135
-
980.18
Ninth Floor
135
-
1019.15
Tenth Floor
135
-
1058.11
Flooring with Italian polished marble slab of 18 mm thick set over base coat of cement mortar (1:8) 20 mm thick (joints of stone must be flushed) over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.30 kgs per sqm. Jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, stone, etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying Italian polished marble to level, curing all taxes, Excluding GST & seigniorage charges on all material etc., complete as directed by Engineer-in-charge for finished item of work
-
-
-
Ground Floor
950
-
7260.92
First Floor
130
-
7335.44
Second Floor
430
-
7409.96
Third Floor
125
-
7484.48
Fourth Floor
125
-
7559
Proviiding Cladding to walls with Italian polished marble slab of 16 to 18 thick of any colour and finish in all shades and designs and make set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement with approved coloured pigment to match the shade of the tiles, including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, tiles, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing all taxes, except GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work .
-
-
-
Ground Floor
275.003
-
6703.12
First Floor
120.00000000000001
-
6762.11
Second Floor
120.00000000000001
-
6821.11
Third Floor
120
-
6880.1
Fourth Floor
120
-
6939.1
Fifth Floor
175
-
6998.1
Sixth Floor
120
-
7057.09
Seventh Floor
120
-
7116.09
Eight Floor
120
-
7175.08
Ninth Floor
120
-
7234.08
Tenth Floor
120
-
7293.07
Supply &Fixing with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black/ premium colours in single piece with edges Rounded and set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm,, water, Granite, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying granite to level, curing all taxes, except GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work for Sill Portion (APSS No.701 & 707)
-
-
-
Sill Portion
-
-
-
First Floor
35
-
6453.17
Second Floor
35
-
6688.26
Third Floor
120
-
6923.35
Fourth Floor
120
-
7158.44
Fifth Floor
120
-
7393.54
Sixth Floor
120
-
7628.63
Seventh Floor
120
-
7863.72
Eight Floor
120
-
8098.81
Ninth Floor
120
-
8333.9
Tenth Floor
120
-
8569
Providing and Making of Granite Counter Top and Facia with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over base coat of CM (1:6) 12mm thick with Grey cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with cement to full depth (joints of stone should be flushed) ,half rounding the edges ,Including for cutting hole/making hole for sink/wash basin,including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm,, water, etc., to site including cost of excluding seigniorage on all materials cost of base coat all labour charges like dressing to the required size, mixing of mortar, curing and lift charges including cutting the brick wall to place the stones and redoing the surface smooth including all incidental and operational charges, Transportation ,labour charges and all taxes but Excuding GST etc., complete for finished item of work as directed by Engineer-In-Charge
-
-
-
Ground Floor
9
-
5495.97
First Floor
9
-
5583.93
Second Floor
9
-
5671.89
Third Floor
15
-
5759.85
Fourth Floor
15
-
5847.81
Fifth Floor
15
-
5935.77
Sixth Floor
15
-
6023.73
Seventh Floor
15
-
6111.69
Eight Floor
15
-
6199.65
Ninth Floor
15
-
6287.61
Tenth Floor
15
-
6375.57
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access
-
-
-
floor panel, the system shall provide 689 SUB HEAD : 11- FLOORING a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H).Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg, all operational and incidental charges, labour and lift charges on all materials and all labour charges , laying flooring to level,all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work .
-
-
-
For All Floors
550
-
4353.3
Providing, preparing the surface and laying of Tile Carpet of size of approved model, machine made solution dyed nylon with synthetic backing, carpet finished Loop pile weight not less than 450 gms/ sqm, a hot water treated carpet with a guage not less than 5mm, average density around 0.3 g/cm3, including transition profile of approved brand as per approved by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all taxes but Excuding GST etc.,complete for finished item of work for all floors and all levels as directed by Engineer In charge make:Millken/Interface/Shaw or approved Equivalent as approved by Engineer-In-Charge
-
-
-
For All Floors
2600
-
2228
Providing and Preparing the surface with 10.50 mm thick Engineering wooden flooring, underlaying with moisture barrier sheet of 0.20 mm thick laying on existing surface,and 2 mm thick PE Foam below flooring and using the accessories like skirting (upto 75 mm thick), beading, end profiles and T-profiles, with approved make as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST, for complete for finished item of work for all floors and all levels as directed by Engineer In-Charge. Make: ARMSTRONG/MAPPLE /FLORTEX or other Equivalent
-
-
-
For All Floors
1400
-
3828.57
Supply and fixing of Vito floor Alpthals multi layer 4.5mm thk sports flooring standard size of 1.8m W x 15m ,weight 3.33kg/sq.mtin gym area ,including fixing ,necessary adhesive and welding ,including cost and conveyance of all materials ,loading and unloading charges ,labour charges for fixing in position etc. to complete for finished item of work as approved by Engineer-in-charge.
-
-
-
For All Floors
95
-
2775.07
Vaccum dewatering concrete floors using TREMIX or equivalent over and finishing the top surface to required level/ slope and grade with rough / polish finish using power trowels (both fan & disc) of standard make including curing, mixing of hardening compound ,cutting of VDF floor 75 mm thick in M-25 grade of concrete with minimum cement concrete of 380 kgs using 20mm to down graded aggregate,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm,, water, etc. Diamond Saw System (disposal of debris to be included in the quoted rate)as per specification etc. complete as per specification and drawing. (Maximum thickness of RCC flooring shall be of 75 mm) LDPe Sheet of 500 Micron,Floor Hardener,cutting groove with 4x10 mm and filling with bitumen sealant ,, providing construction and expansion joins not more than 3.5mX3.5mts panals as directed by Engneer in Charge including providing necessary slopes for drain of water, in cluding all incidental all operational charges etc.,all taxes for finished item of work as per direction of engineer-in-charge
-
-
-
VDF 75 mm thick flooring
19000
-
799.1
Providing Water Proofing,making the Surface Preparation/ Cleaning the existing Flooring, removing all demurrage existing upto concrete surface, Applying Bostic BOSOLASTIC/ FOSROC/MYK of approved brand by the Engineer-in-Charge Brush bond a polymer based two component waterproof coating in two coats, with proper galthas, alround Side upto a height of 0.30m wherever necessarily required, and the protecting coat Water Proofing plastering by using 20 mm thick in two coats with CM (1:3) and mixing High durable cementitious acrylic based waterproofing chemical, with including all incidental and operational charges, Transportation, labour charges, all overhead charges & contractor profit, all taxes except GST etc.,complete as directed by Engineer In Charge for finished item of work for all floors and at all levels etc., to site, finishing, scaffolding, lift charges, curing, all taxes but excluding GST, etc. complete for finished item of work as directed by Engineer-In-Charge etc., complete for finished item of work. (SS 903 & 904).
-
-
-
For All Floors
1450
-
766.6
Partition
-
-
-
Suppply,Providing,Making and Fixing of 75 mm thick Double skin partition using 12 mm thick Plywood on each side conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50x25x2 mm thick and finished with 1 mm thick Laminate for exposed surface of ply (two sides of partition) and edge surface,Air gap between the plywood boardss is lined with providing 50mm thick rock wool of density 48 Kg/m3 of approved make shall be placed in the cavity glass wool rapped with 40GSM fiber glass tissue, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels.
-
-
-
For All Floors
1950.00029352
-
4749.63
Supplying and fixing in position Toilet Cubicle size (not less than 900mm width not less than 1200mm of depth )upto of 1200mm wide X 1500 mm Length X 2100mm Height, including the bottom gap of 100mm of approved make (of following standard dimension which includes door size of 600mm X 1950mm Height, providing Cuboid Intermediate Panel, Pilaster and Door: Intermediate panel is one continued panel without any joints,all intermediate panels, panels, pilasters and doors shall be 12mm thk with edges chamfered. The solid compact laminate ( Phenolic Core Board) is based on thermosetting resins, homogeneously reinforced with cellulose fibres. Top surface on both sides is melamine coated which is scratch and impact resistant. As per Bureau of Indian Standards IS 2046 : 1995,all pilasters are to be supported by adjustable foot and non corrosive inserts. Top rail and wall fixing with and exterior polyamide coating guarantees resistance to breakage, heat, humidity and chemicals. The base of the adjustable foot will be anchored to the floor with a clearance height of 100mm. Aluminum U- Channel will be used for the fixing intermediate panels to the wall.
Cubicle should contain the following:
(a) SS Adjustable legs- 2 nos -(316 grade) (b) SS Spring Hinges -3 nos- (304 grade) (c) SS Door Knob-1 nos- (304 grade) (d) SS Coat Hook- 1 nos - (304grade) (e) SS Privacy Thumb turn - 1 nos -(304grade)
-
-
-
Providing Aluminium Profiles:Aluminum U- Channel will be used for the fixing of intermediate panels to the wall. Aluminium h -channel will be provided to the pilasters to enable the closing of the door. Aluminium Top Rail will be provided on top of the pilasters from end to end enabling a rigid construction of the entire cubicle.Cubicle contain the following ANODIZED ALUMINIUM PROFILES:(a) U-Profile( b) H-Profile (c) L-Profile (d) Top Rail (e) Door stopper lining, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer In-Charge for finished item of work for all floors and at all levels
-
-
-
For All Floors
174
-
26699.53
Supply and Fixing of 8mm HPL Urinal partition 500mm x 900mm with all the necessary SS D-Brackets, Installed as per the detailed drawing, including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Merino, Stylam or equivalent
-
-
-
For All Floors
73
-
3408.5
Suppply,Providing,Making the Panelling with 12 mm thick Plywood and on exposed surface of the base frame conforming to IS:303 BWR Grad and Medium Fibre Board: Interior Grade - 6 mm thick conforming to IS 1593,for the existing surface of the partition/wall using with base frame using Aluminium section of size 50.80x25.40x1.44 mm thick and necessary cleat of size 35x20x3 mm thick and finished with using, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels.
-
-
-
For All Floors
1000
-
3082.52
Supply,providing and Installation Aluminium Skirting with 75 mm height and 1.50 mm thick and top surface of the skirting is finished with capping clip, fixed to the existing masonary wall/partitions to flush with grooves to pattern installed as per approved drawing colour and shade as directed Engineer -in-charge, including all incidental and operational charges, Transportation ,labour charges all overhead and contractor profit and all taxes Excluding GST & seigniorage charges etc.,, complete as directed by the Engineer-in-charge for finished item of work for all floors and all levels .( Makes: Doyle asia /Alloy/Otics/Cubic/equivalent)
-
-
-
For All Floors
7600
-
289.72
Supply and installation of 3M wall graphics fixing on existing surface of the partition and fixing with necessary adhesion solution, with approved pattern and design as per approved drawing as directed by Engineer -in-Charge,including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
600
-
2127.15
Supply,Providing and Making the Mirror in toilets ,using base frame using 6 mm thick Plywood conforming to IS:303 BWR Grade is fixed to wall and exposed surface of plywood is finished with 6 mm thick Mirror and and the edges of the mirror polishing, including adhesive compound ,mirror tape nails,and using required number of SS studs not less than 12 mm , as per approved colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
300
-
2313.43
Supplying ,providing and fixing of 6 mm thick Annealed Griha rated Lacquered glass EN 16477 Humidity resistance fixed with compatible neutral core silicon/lacquered double sided tape,fixing on existing surface of the partition/wall,lacquered glass must be opaque and coated the lacquered glass polished, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
1000
-
3280.29
Supplying and fixing stainless steel etc using 304 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials buffing charges polishing charges ,inckuding all labour charges ,material charges ,excluding GST ,complete for finished item of work. (50mm dia @4.57kg/Rmt, 40mm dia @3.61kg/Rmt and 25mm dia @2.46kg/Rmt )
-
-
-
For All Floors
13600
-
705
Supplying,Providing and fixing of 1.5mm Anti- Corrosive Brushed SS Plate ,Engraving the Letters on SS Plate as per design ,as per approved pattern ,as directed by Engineer-in-charge,including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes Excluding GST etc., complete for finished item of work for all floors and at all levels as directed by Engineer In Charge
-
-
-
Size 300 mm x100 mm
125
-
795.31
Size 100 mm x100 mm
125
-
284.04
Providing and applying Putty with 1 to 2 mm thickness and Cement primer making 3 or more coats and with approved brand , over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation as per approved drawing colour and shade by Engineer in charge, including cost of access scaffolding , all incidental and operational charges, Transportation ,labour charges and all taxes Excluding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
-
-
-
For All Floors
5700
-
300.96
Doors
-
-
-
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of size 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass alvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float fire rated vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992,,including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels
-
-
-
For All Floors
750
-
15064.21
Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to single rebate profile of size 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc ,,including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels
-
-
-
For All Floors
170
-
12686.25
Supply & Fixing of DORMA KTV 3 Automatic Revolving Door with RAL Finish Without Breakout Feature.With 3 Nos of Leafs of EN 16005 Series,with the Internal Diameter with 3000 mm,Clear Passage 1440 mm width and 2400 mm Height,Canopy height of 100 mm,Full Door height of 2500 mm,Glass door using 6 mm thick Toughned Glass with frame,Drum wall : Framed using 10.76 mm Laminated Safety Glass Automatic revolving door equipped with the new DORMA "KT FLEX Direct" drive system, a gearless direct drive operator based on magnetic levitation technology- low-noise and low-wear system with an outstanding positioning accuracy with 3 leaves, Fixed turnstile with Standard frame profile system, drum walls made of glass, ceiling and roof made of Melamine Board, with LED Lamps in ceiling, with Metal Canopy , With Mechanical Locking, Integrated safety devices for protection of the crush points and shear edges, Motion Sensors in Canopy, Safety Bumper with Electrical Cut-off on Drum Wall & Door Leaf,and all as per specifications,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, for fixing,installation, overhead charges & contrctor profit , all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . S
-
-
-
For All Floors
2
-
3884070.79
Supply & Fixing of 7+1 Lane configuration = 7 Normal lane + 1 Wider lane Sensor Swing flap Barrier:- (1) Two wings/door leaves are made of transparent polycarbonate with 10 mm thickness, upper edge 900 mm with opening/ closing time of 0.3 seconds minimum, which can be adjusted as per requirement . (2) Design: The housing and the base columns are made of AISI 304 stainless steel. Finish: Stainless steel semi-gloss smooth finish. (3) Function: The sensor barrier is equipped with two servo positioning drives (low energy drives with energy content 1.6 joules) along with Tooth holding brake technology and is electrically controlled in both directions thus guaranteeing a particularly high level of personal safety. The passage area is monitored by a basic sensor system with a short design. It monitors the individual passages in both directions. This sensor system also monitors the swinging area and the blocking elements and acts as a protection device. In the event of a power failure, both directions may be freely accessed. Automatic reset upon resumption of power supply – the unit resets to its regular function without manual intervention. The access area is secured immediately upon resumption of power supply. The unit can be locked in any position (Tooth Holding Brake Technology) and opens under load (personal safety in case of panic). In basic position, the unit is unlocked to minimise power consumption. Parameters can be set for unit behaviour and each specific customer (e.g. starting behaviour and passage speed). (4) Standard measurements: Total width: 1,070 mm, passage width: 650 N/900 W mm, interlock height: 945 mm & wings height 900 mm and total length 1660 mm (5) MCBF: Complete swing flap barrier unit/system MCBF (mean cycles between failures) is 8 million for 650 mm passage width and 6 million for 900 mm passage width (6) standby power consumption 17 VA (7) flap barrier should have inbuild counter and possibly if required to display the count,,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
8
-
864947.59
Supplying and fixing of Frame less Double leaf Glazed Door of 12 mm thick toughened glass of size 900 X 2400 mm Fully openable Patch Fitting partition and door of ' DORMA' "PT" range Fittings to get a clear height with top & Side Fixed panels. In general, the openable door cum Fixed panel consists Glazed Door GD: PFinish: Satin stainless steel including cost and coneyance of all materials to site, all labour charges, all taxes etc complete for finished item of work as directed by the Engineer In charge. Dorma Patch fitting with the following ItemsPatch fitting Set for frameless Single glass door consisting of: 2 Nos of PT 10 Bottom patch with satin SS cov.er,2 Nos of PT 20 Top patch with satin SS cover,2 Nos of PT 24 Top pivot plate, 2 Nos of Universal corner lock UL 10 ,2 No Floor spring - BTS-75V EN 1-4,&, 4 No's Dorma Handle -TGDID 600 X 32 S,Satin SS 304, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete for finished item of work for all floors and at all levels as directed by Engineer In Charge (Size of 1.800 X 2400 mm)
-
-
-
For All Floors
125
-
18594.23
Supply & Fixing of Aluminium Frame Single Glazed Door with using 12 mm thk toughened glass with DORMA Alexa System-100 frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Alexa STP100 Door Profile frame with clips & seals with DORMA Flush Hinges (3Nos) & TGDI- H -450 mm Handle , 917 Narrow stile Dead Lock package and DORMA TS -89, EN3-6 Door closer (as per EN 1154) with Hold Open unit necessary seals to be provided all around the door frames. For doors part of single/double glazed partiton DP100-SG/DG Door rebate profile to be used.In case of Glass overall panel Alexa OHPDP100-SD/DG Over Panel Door profile to be used.The Profile to be 2mm Gauge thickness excluding 20 Micron of Anodizing and shall be matt natural anodized, the Profile ,all the necessary clips, seals and fixing accessories for the system.as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete for finished item of work for all floors and at all levels as directed by Engineer In Charge (Size of1000 X 2400 mm)
-
-
-
For All Floors
160
-
29806.9
Supply and Fixing of Double Glazed partition 32 mm thick using with(10 mm glass+12 mm Air gap+10 mm Glass) 10 mm thick Toughened Glass +12 mm Air gap+10 mm thick Toughened Glass with using Dormakaba Alexa System-100-DG Frames upto maximum height as per approved drawing.The Single Glazed glass partition fixed with the profiles using for Top and Bottom with DORMA Alexa BP100-DG Profiles and Side using Alexa SP100-DG profiles and the Profile size of 100x25 mm is to be fixed for Floor,Wall and ceiling as per approved pattern and as per approved drawing. DORMA Alexa H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per approved drawing and at the open glass edges EP100-DG End Profile to be used. The Alexa profiles with matt natural anodizedwith 20 Micron and all profile thickness 2mm Guage ,and fixing with necessary hardwares,clips and selant etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
1350
-
11591
Supply and Installation of Light Shaft Frameless Glazed Facade with using 12 mm thick Toughened Glass panels and suspended from top of the opening ,including suspension brackets ,spider fiitings of Dorma RSF SPIDER with 4,2,1 arm point supports and fixed head/articulated bolts ,The Dorma RSF spiders design to reduce stress concentration at transition points ,Sleek load resistance,and the spiders of Grade SS316,RSFB bolts of Grade SS316 with necessary accessories,the glass surface and metal is protected by using EPDM washers,and glass hole protected from direct contact with the metal by derlin bush ,spring washer conforming to SS316 acts as locking mechanism to secure nut in place ensuring full tightness for long period of time etc.,including fixing with necessary hardwares,clips and selant etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
950
-
11929.58
Supply and Installation of S-Grip SG-15 Glass railing system with using 13.52 mm thick laminated Glass of Saint Gobain (6mm +1.52 PVB+6 MM ) of Heighs,frame work using with Top Rail with SGHR -7015 Grade and Bottom Rail with TC---6063 Grade with PVDF Aluminium finish with all necessary accessories. The bottom base profile using cover profile bottom with wedges inside the channel fixing will be done on the top of the RCC Slab/MS and Hilti anchor fastener with Hilti Chemical,including all necessary accesories etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
Glass Railing Height of 1000 mm
60
-
16019.72
Glass Railing Height of 1500 mm
550
-
18443.12
Supplying and Installation of Roller Blinds with Phifer Screen of composition of 35% Fiberglass & 65% vinyl on Fiberglass P12 - Oyester (5%)and meshweight of 488.5 g/m and fabric thickness of 0.61 mm and openness factor 5%. UV Protection 95% .Anti Microbial protection:ASTM E 2180, ASTM G21, AATCC30 Part3, ASTM D3273, Greenguard Mold and Bacteria standard ASTM6329, includes microban antimicrobial additives.Flame retardant:California U.S. Title 19 (small scale), ASTM E 84(Class 1), BS 5867 2008 Part 2 Type B performance, NFPA 701 TM#1(small scale), CAN/ULC-S 109-3 (Large and small scale).Lead Free Certification :100% Lead Free RoHS / Directive 2002/95/EC, US Consumer Product Safety Commission Section 101 and ANSI/WCMA A100.1-2007 for lead content, REACH (EC 1907/2006) compliant etc.,. Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .(Makes :Sunblock/Hunter Douglas or Equivalent as approved by Engineer-in-Charge)
-
-
-
For All Floors
2175
-
2017.12
Supply, fabrication and installation of Semi unitised structural glazing system (Partially Double Glazing Unit + partially Single Glazing Unit ) with pure polyster powder coated aluminium mullions and transoms to with stand a design wind pressure of 2KPA conforming to IS 875-Part-3. The system shall be designed incorporating the air pressure equalization principal.
Mullions are fixed to RCC/MS structure using 6mm thick HDGI brackets of required size, fixed through GI anchor fastners of Hilti/Fisher/Wurth make or through welding as required by the site conditions. Transoms are fixed to mullions using splice plate and screws of required sizes, inclusive of all the required hardwares like SS Screws and nut bolts, EPDM gaskets, PVC/Nylon shim seperator for Bi-Metallic Corrosion, backer rod, strucutral and wheather sealant etc., as per the approved shop drawings. The system shall be designed to accomadate thermal movement of the aluminium framing system including supporting arrangements, fastening devices, glass and to accomodate horizontal building movement. No aluminium members shall be visible from outside.
A)inclusive of designing the system, preparation of shop drawing for approval,and Aluminium section per sqm should not be less than 7.50 Kg/Sqm full scale mock-up, supply, fabricate, erect as per approved drawing at all levels, elevation & heights. Design the framing system to support both Vision & Spandral panel on a continuous framing system.
-
-
-
B)Providing and fixing DGU and SGU glass for both vision and spandrel panel conforming to the minimum technical parametres as mentioned below : 24mm DGU Glass Specifications : Outer glass shall be of 6mm KT 440 HS glass of Saint Gobain+ 12mm airgap + 6mm clear HS glass with Light transmission not more than 31%, Solar factor 0.22, shadding co-efficient as 0.25 and U-Value as 1.80 W/Sqm.K. 6mm SGU Glass Specifications : 6mm ST 436 HS glass of Saint Gobain with Light transmission not more than 31%, Solar factor 0.35, shadding co-efficient as 0.41 and U-Value as 5.5 W/Sqm. Insulated glazing unit (Double Glazed panel) shall have Aluminium spacers and primary sealant as Poly-isobutylene (PIB) and a secondary seal with structural silicon sealant of DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (two part) of GE Bayer silicone make or approved equivalent make. Make of glass proposed for Inner and outer pane of Insulated Glazing unit should be the similar make. The insulated glazing unit should be processed only by the approved Processor
-
-
-
Providing and fixing of Marvel make Motorised Grayson Blinds of Translucent fabric with 70% outside visibility and 0.41 mm (+- 0.05) thickness comprising 100% polyester fabric with weight (GSM) of 190 g/m2 (+- 5%). Top channel extruded by non-rusting Aluminum alloy & powder coated. Sheer & vale box in 55 mm decoration cassette. Bottom Channel of Aluminum powder coated with 1.20 mm thickness matching color of the fabric. The tilt chain should be made by unbreakable Polyoxy Methylene plastic, 1.50 mm polyester cord with 4.50 mm balls. Brackets shall be accommodating overhead or wall on either end of the blind. Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
C)Providing and fixing EPDM / Neoprene gaskets to ensure water and air tightness. Providing continuous internal built in drainage system (Barrier) and such system shall be suitably designed to drain out the water at lowest floor level.it ncludes required scaffolding at all level and guarantee for sealent for 10years from Dowseal and including power charges.
D)Providing and applying the Sealents with required thickness & bites size, based on the glass sizes as designed & determined by calculation, verified by testing and to withstand 3 times of the stress caused by the design wind pressure. Glass shall be pasted on to sash profile using spacer tape of required thickness and width and structural sealant DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (Two part) (silicone structural adhesive) of GE Bayer Silicone or approved equivalent make. Grooves/gap between glass to glass and glass to RCC or MS structure shall be filled with backer rod of required thickness and Weather proof Sealent shall be DC 789 of Dowcorning or equivalent in GE Bayer silicon or approved equivalant make. No acetoxy sealent shall be used for Glazing,omplete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental, Scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
3300
-
12724.88
Supply, fabrication and installation of Semi unitised structural glazing system - Spandral Glazing ( Single Glazing Unit ) with pure polyster powder coated aluminium mullions and transoms to with stand a design wind pressure of 2KPA conforming to IS 875-Part-3. The system shall be designed incorporating the air pressure equalization principal.
Mullions are fixed to RCC/MS structure using 6mm thick HDGI brackets of required size, fixed through GI anchor fastners of Hilti/Fisher/Wurth make or through welding as required by the site conditions. Transoms are fixed to mullions using splice plate and screws of required sizes, inclusive of all the required hardwares like SS Screws and nut bolts, EPDM gaskets, PVC/Nylon shim seperator for Bi-Metallic Corrosion, backer rod, strucutral and wheather sealant etc., as per the approved shop drawings. The system shall be designed to accomadate thermal movement of the aluminium framing system including supporting arrangements, fastening devices, glass and to accomodate horizontal building movement. No aluminium members shall be visible from outside.
A)inclusive of designing the system, preparation of shop drawing for approval,and Aluminium section per sqm should not be less than 7.50 Kg/Sqm, full scale mock-up, supply, fabricate, erect as per approved drawing at all levels, elevation & heights. Design the framing system to support both Vision & Spandral panel on a continuous framing system.
-
-
-
B)Providing and fixing DGU and SGU glass for both vision and spandrel panel conforming to the minimum technical parametres as mentioned below : 6mm Single Glazing UnitSpecifications : 6mm ST 436 HS glass of Saint Gobain with Light transmission not more than 31%, Solar factor 0.35, shadding co-efficient as 0.41 and U-Value as 5.5 W/Sqm. Insulated glazing unit (Double Glazed panel) shall have Aluminium spacers and primary sealant as Poly-isobutylene (PIB) and a secondary seal with structural silicon sealant of DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (two part) of GE Bayer silicone make or approved equivalent make. Make of glass proposed for Inner and outer pane of Insulated Glazing unit should be the similar make. The insulated glazing unit should be processed only by the approved Processor
-
-
-
Providing and fixing of Marvel make Motorised Grayson Blinds of Translucent fabric with 70% outside visibility and 0.41 mm (+- 0.05) thickness comprising 100% polyester fabric with weight (GSM) of 190 g/m2 (+- 5%). Top channel extruded by non-rusting Aluminum alloy & powder coated. Sheer & vale box in 55 mm decoration cassette. Bottom Channel of Aluminum powder coated with 1.20 mm thickness matching color of the fabric. The tilt chain should be made by unbreakable Polyoxy Methylene plastic, 1.50 mm polyester cord with 4.50 mm balls. Brackets shall be accommodating overhead or wall on either end of the blind. Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
C)Providing and fixing EPDM / Neoprene gaskets to ensure water and air tightness. Providing continuous internal built in drainage system (Barrier) and such system shall be suitably designed to drain out the water at lowest floor level.it ncludes required scaffolding at all level and guarantee for sealent for 10years from Dowseal and including power charges.
D)Providing and applying the Sealents with required thickness & bites size, based on the glass sizes as designed & determined by calculation, verified by testing and to withstand 3 times of the stress caused by the design wind pressure. Glass shall be pasted on to sash profile using spacer tape of required thickness and width and structural sealant DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (Two part) (silicone structural adhesive) of GE Bayer Silicone or approved equivalent make. Grooves/gap between glass to glass and glass to RCC or MS structure shall be filled with backer rod of required thickness and Weather proof Sealent shall be DC 789 of Dowcorning or equivalent in GE Bayer silicon or approved equivalant make. No acetoxy sealent shall be used for Glazing,omplete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental, Scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
1400
-
10679.81
Supply, fabrication and installation of Semi unitised structural glazing system ( 31.52mm overall thicness (6+1.52+6+12 air gap+6mm clear toughned glass =31.52mm with Laminated DGU Glass)with pure polyster powder coated aluminium mullions and transoms to with stand a design wind pressure of 2KPA conforming to IS 875-Part-3. The system shall be designed incorporating the air pressure equalization principal.
Mullions are fixed to RCC/MS structure using 6mm thick HDGI brackets of required size, fixed through GI anchor fastners of Hilti/Fisher/Wurth make or through welding as required by the site conditions. Transoms are fixed to mullions using splice plate and screws of required sizes, inclusive of all the required hardwares like SS Screws and nut bolts, EPDM gaskets, PVC/Nylon shim seperator for Bi-Metallic Corrosion, backer rod, strucutral and wheather sealant etc., as per the approved shop drawings. The system shall be designed to accomadate thermal movement of the aluminium framing system including supporting arrangements, fastening devices, glass and to accomodate horizontal building movement. No aluminium members shall be visible from outside.
A)inclusive of designing the system, preparation of shop drawing for approval, and Aluminium section per sqm should not be less than 7.50 Kg/Sqm,full scale mock-up, supply, fabricate, erect as per approved drawing at all levels, elevation & heights. Design the framing system to support both Vision & Spandral panel on a continuous framing system.
-
-
-
B)Providing and fixing DGU and SGU glass for both vision and spandrel panel conforming to the minimum technical parametres as mentioned below : 13.52mm Laminated DGU Glass s Specifications : Outer glass shall be of 6mm ST 436 toughened glass of Saint Gobain+1.52pvb+6mm clear toughened + 12mm airgap + 6mm clear toughened glas with Light transmission not more than 31%, Solar factor 0.22, shadding co-efficient as 0.25 and U-Value as 1.80 W/Sqm.K. 6mm SGU Glass Specifications : 6mm ST 436 HS glass of Saint Gobain with Light transmission not more than 31%, Solar factor 0.35, shadding co-efficient as 0.41 and U-Value as 5.5 W/Sqm. Insulated glazing unit (Double Glazed panel) shall have Aluminium spacers and primary sealant as Poly-isobutylene (PIB) and a secondary seal with structural silicon sealant of DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (two part) of GE Bayer silicone make or approved equivalent make. Make of glass proposed for Inner and outer pane of Insulated Glazing unit should be the similar make. The insulated glazing unit should be processed only by the approved Processor
-
-
-
Providing and fixing of Marvel make Motorised Grayson Blinds of Translucent fabric with 70% outside visibility and 0.41 mm (+- 0.05) thickness comprising 100% polyester fabric with weight (GSM) of 190 g/m2 (+- 5%). Top channel extruded by non-rusting Aluminum alloy & powder coated. Sheer & vale box in 55 mm decoration cassette. Bottom Channel of Aluminum powder coated with 1.20 mm thickness matching color of the fabric. The tilt chain should be made by unbreakable Polyoxy Methylene plastic, 1.50 mm polyester cord with 4.50 mm balls. Brackets shall be accommodating overhead or wall on either end of the blind. Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
C)Providing and fixing EPDM / Neoprene gaskets to ensure water and air tightness. Providing continuous internal built in drainage system (Barrier) and such system shall be suitably designed to drain out the water at lowest floor level.it ncludes required scaffolding at all level and guarantee for sealent for 10years from Dowseal and including power charges.
D)Providing and applying the Sealents with required thickness & bites size, based on the glass sizes as designed & determined by calculation, verified by testing and to withstand 3 times of the stress caused by the design wind pressure. Glass shall be pasted on to sash profile using spacer tape of required thickness and width and structural sealant DC 983 or DC 995 of Dow corning or SSG 4000 (one part) or SSG 4400 (Two part) (silicone structural adhesive) of GE Bayer Silicone or approved equivalent make. Grooves/gap between glass to glass and glass to RCC or MS structure shall be filled with backer rod of required thickness and Weather proof Sealent shall be DC 789 of Dowcorning or equivalent in GE Bayer silicon or approved equivalant make. No acetoxy sealent shall be used for Glazing,omplete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental, Scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .(Excluding Base frame of MS structure for Skylight area)
-
-
-
For All Floors
375
-
16474.18
Supply and fixing of hardware Extra over SGU/DGU area for top hung openable panels for windows in Structural Glazing for each shutter shall be fixed with One Pair of SPT – 26 Stainless Steel Friction Stay accompanied by Restrictor Arm Code SR8 and Adjustment Block S7280 and One Complete Set of Two Point Locking Handle – 650 including Fastening Kit – S-12 (1 No.); Rod Ends – 33007 (2 Nos.); and Receiving Element – 33009 (2 Nos.) of Alualpha or equivalent Make. Including horizontal transom profile to split the height of the glass for openable shutters, Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental ,scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .( Glass for the openable shutter is covered in the DGU Glass ).Hardware for Openable Panels in Structural Glazing
-
-
-
For All Floors
500
-
5396.71
Supplying,providing and fixing of Insulation at Spandrel location in Structural Glazing with 1mm Thick G.I. Sheet fabricated in a Tray Form, duly filled with Fibre Glass Wool - 50 mm Thick 48 Kgs/CuM conforming to IS – 8163 / BS 3958 / ASTN C 612 with one side Black Glass Tissue – facing the Glass. The G.I. Tray shall fixed on to the Spandrel Panel Shutter Profile with 50 mm wide aluminium angle. The cleat angle shall be provided at regular intervals of 300 mm starting from 75 mm of the edge. Total number of fixing shall be three numbers for horizontal top and bottom and two numbers for vertical left and right. The Perimeter Gap between the G.I. Tray and Aluminium Spandrel Panel Shutter Profile shall be sealed by application of Weather Silicon Sealant of Dowsil – 789 of Dow Corning Make. etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental ,scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.
-
-
-
For All Floors
850
-
2101.88
Providing and fixing of Smoke Seal fabricated with 1mm thick G.I. Sheet fabricated to required shape (Tray and Cover) and filled with Loose Rock Wool or Rock Wool Slab of Lloyds Insulation. The Smoke Seal Tray shall be fixed on to the RCC Members / Beam / Masonry flushed to sill level. The Smoke Seal shall be sealed between the G.I. Tray and Masonry on the top of the tray as well as gap between two consecutive trays by application of Weather Silicon Sealant Dowsil – 789 (Black) of Dow Corning Make etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental ,scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit,all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.
-
-
-
For All Floors
900
-
1136.15
Providing and applying Two coats of Duco paint of approved shade and colour , ,to give an even and uniform shade applied over a coat of primer and ready made putty,fully to give a smooth and even surface including throughly brushing the surface free from water /mortor dropping and other foreign matter and sand paper smooth where ever required heights approved make as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site omplete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & ontrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
3100
-
1650.37
Supply & Fixing of Sliding door with Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame ,fixing in aluminium guide channel and Keyless lockset for toilet doors with CP or PC knob handles (complete set)Grab bar 32 mm Dia lenth 600 mmo ( in satin stainless steell , as per approved drawing including Labour charges for wrought and put up and fixing in position,as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,complete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contractor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
36
-
4357.3
Supply and Fixing of Single door with flush shutter of size 1.05 x2.10 mts with best Teak Wood frame of size 100X62.5 mm, Flush shutter of solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame to the wall with Fixtures of of 3 Nos of 127x76x3 SS Ball Bearing Hinges,250mm SS Tower Bolt with screw,1 Nos of SS 06 D-Type Pull Handle 22 mm dia Pair, Euro Profile Cylinder both Coin or Knob 60 mm SS , 1 No of Door Closure Ext with palmet arm upto 80Kg, 3 Nos of MS Z hold Fasts 300 MM Long ,with necessary accessories with Doorset /Equivalent and screws etc. complete, as per approved drawing including Labour charges for wrought and put up and fixing in position, as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,complete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contractor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
85
-
6900.56
Supply and Fixing of Single door with flush shutter of size 0.90 x2.10 mts with best Teak Wood frame of size 100X62.5 mm, Flush shutter of solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame to the wall with Fixtures of of 3 Nos of 127x76x3 SS Ball Bearing Hinges,250mm SS Tower Bolt with screw,1 Nos of SS 06 D-Type Pull Handle 22 mm dia Pair, Euro Profile Cylinder both Coin or Knob 60 mm SS , 1 No of Door Closure Ext with palmet arm upto 80Kg, 3 Nos of MS Z hold Fasts 300 MM Long ,with necessary accessories with Doorset /Equivalent and screws etc. complete, as per approved drawing including Labour charges for wrought and put up and fixing in position, as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,complete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contractor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
-
-
-
For All Floors
32
-
7977.72
Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawing , including cost and conveyance of all Mild steel Tubes & Pipes sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like MS Tubes & pipes, including cost of welding rods, power charges, Labour charges and Fabrications charges etc.,inluding all taxes Excluding GST etc,including fixing in position for complete finished item of work as aper approved drawing as directed by Engineer-In -Charge.
-
-
-
For All Floors
164.99952000000002
-
119466.17
Supplying and fixing Fire rated aluminium composite sheeting with 2 Hours Fire Rated ( FR A2 Grade)of any approved plain shades, with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants,rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all labour charges etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental ,scaffolding and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc.. complete as directed by Engineer In Charge for finished item of work at all levels.( Excluding Supporting MS structural steel Frame work)
-
-
-
3rd Floor
3225
-
5090.82
6th Floor
3220
-
5108.05
Supply & application of one coat cement primer of interior grade I and two coats OR MORE COATS of Plastic emulsion / solvent based lustre paint of superior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. for internal walls including cost and conveyance of all materials to site, sales & other taxes, except GST, but incidental, operational and all labour charges etc., and overheads & contractors profit etc., complete for finished item of work in all floors..as per SS 912 for Internal walls for:-Interior Colouring - Plastic emulsion paint - 3 Coats
-
-
-
For all floors
9600
-
207.23
Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit etc., complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
-
-
-
For all floors
500
-
184.78
Painting to new walls with 2 or more coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges Excluding GST etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Water proof cement paint - 3 Coats
-
-
-
For all floors
12000
-
90.7
Plumbing and Sanitary
-
-
-
SANITARYWARE AND CP FITTINGS
-
-
-
Supplying and fixing of Replay Wall Mount Water Closet (6098IN-SR-0) with Next Flushing platform for 360 Degree cleaning of Germ shield Technology and seat has long lasting protection from backteria ,quick release hinges seat to be unlatched from toilet for easy removal and convienent cleaning and Eco Flush volume 3-6 litres,12mm Rack Bolt With Ced Plated Stud with1set- 2 Nos of 1213309-0 ,Connector Accessory Pack of 1046327-S, Pneumatic flush valve 31538IN-CP with flush plate has a pneumatic connection to the flush valve and the actuation mechanism is same as a pneumatic In wall tank. Minimum dynamic pressure of 0.50 bar, Flush valve to WC connection accessories for height adjustability to match all toilet of approved make etc. as per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc,complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
190
-
14135.07
Supply and Fixing of Chromium plated finish brass body quarter turn 2 way Bibcock of 16094IN-4-CP ,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
190
-
1904.41
Supply and Fixing of Health Faucet of 12927IN-CP with DSpray ,Metal Hose health faucet with 1.00 Mt long tube and wall hook etc.,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
190
-
1078.43
Supplying and Fixing of Patio Urinal of 0.50 Litres Germ Shield with integrated sensor of 16321T-M-0 etc, of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
87
-
15973.81
Supplying & Fixing of Geometric Showerhead with Showerarm and Escutcheon of with Racetrack Waterway that ensures equal distribution of water through the showerhead and delivers a revitalising spray with full coverage. MasterClean™ sprayface is easy to clean with 45429IN-CP and with 2 outlet diverter delivering 37 Lpm(Litres per minute) at 3 Bar and distorsion capacity of 36 bar with 882IN-CP,Bath Trim for 2 outlet diverter in Hint Series 22541IN-4FP-CP, Bath Spout in Hint Series 22544IN-CP, of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
16
-
7709.69
Supplying & Fixing Counter top Wash Hand Basin Fore Front Rectangular with Hole with straight line with rounded edges and soft surface curves (2660IN-1-0) with Grid Drain 45432IN-CP and Angle valve of R45616IN-9-CP and CP finish brass heavy duty Bottle trap with 350 mm extension pipe 75823IN-CP and including Sensotronic sensor faucet for wash basin, withPower: DC 4 pieces of AA size alkaline batteries (LR06x4) AC 220V, frequency 50/60Hz, Shut-off Delay: 0.5~1s, Sensing Distance: auto adjust, Automatically stop flushing when the faucet continuously senses an object for more than 1 minute 72867T-CP etc, of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Kohler/Equivalent)
132
-
17100.19
Supply & Fixing of Counter Mounted Soap Dispenser ,B 822 1. Spout: 4 inches (102mm); rotates 360 degrees without damage to valve mechanism 2. Description: Piston and spout assembly removable for top filling. 3. Piston, Spout, and Top Cover: Type 304 stainless steel with bright polished finish. 4. Spout: 4 inches (102mm); rotates 360 degrees without damage to valve mechanism. 5. Cover Spacer: Rigid, impact-resistant polyester. 6. Escutcheon: Chrome-plated, high-impact-resistant ABS with bright polished finish; locks to body with concealed locking mechanism opened with key provided. 7. Body and Shank: High-impact-resistant plastic. 8. Shank: Accommodates up to 1 inch (25mm) mounting thickness.
9. Valve: ABS cylinder, stainless steel spring, U-packing seal and duckbills. Valve dispenses commercially marketed all-purpose hand soaps. 10. Container: Translucent, shatter-resistant polyethylene. 11. Capacity: 1 Ltr Etc of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .(Bobrick or Equivalent as approved Engineer-In-charge)
120
-
4435.76
Supplying and Fixing of Classic Recessed Paper Towel Dispenser/Waste Bin(2-in-1)(Dispenses: 600 C Fold/800 M Fold Papers, Bin Capacity: 45.4 L) B 3944. Cabinet: All-welded, 18-8, Type 304, heavy gauge stainless steel with satin finish on exposed surfaces.Flange:Drawn and beveled, one-piece, seamless, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Door: Double-pan-back construction, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish; equipped with semi-concealed tumbler lock keyed like other washroom accessories. Hinge: Full-length stainless steel piano-hinge.Waste Receptacle: 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish; hemmed top and front and sides of bottom, secured with tumbler lock keyed like other washroom accessories; equipped with interior hooks for optional vinyl liner. Waste Capacity: 12.0 gallons (45 L). Towel Dispenser: 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. Towel Dispensing: Hemmed towel tray opening dispenses towels without tearing.TowelMate Accessory: Dispenses one paper towel at a time without towels sagging or falling through the towel tray opening. Round nylon rod and stainless steel rod screws support stack of paper towels. Liner Mate Accessory: Molded plastic sleeve riveted to U-shaped, 18-8 S, Type 304, 20 gauge (0.91mm) stainless steel, hemmed support strap; secures disposable plastic can liners, eliminates liner overhang waste receptacle etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
38
-
35402.43
Supplying and Fixing Towel Mate towelMate Accessory for 4'' deep paper towel dispensers 3944 -130 module shall be Type-304 stainless steel with 2B finish. Black nylon support rod, 3/8" (10mm) diameter, fastened to module with stainless steel sheet metal screws. TowelMate Accessory fits into Bobrick Model number B-3944, Paper Towel Dispenser fitted with TowelMate Accessory shall dispense 800 multifold paper towels. TowelMate Accessory Module has a 90 degree return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing, and a TowelMate Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening). TowelMate reduces paper towel waste by 20% – 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
38
-
3635.68
Supply and Fixing of Surface Mounted Ultra Fast Hand Dryer with air speed of 300 KMPH shall have a deep-drawn satin metal finish cover. Mounting Base and fan housing shall be fire-retardant moulded plastic. Power 550 watts (1100 watts with heating element having an option of ON /Off which is manageble by Owners). Drying time will be 10 to 15 Seconds .Unit shall have EPA E 11 filter for Clean air , UV lamp for Inside Disinfection. Electric Protection Level IP23 - Class II. Dryer will turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately two minutes after dryer turns on if an inanimate object is placed across sensor lens. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally with having 3 yeras of warranty etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (VAMA/Equivalent)
38
-
23622.83
Supply and Fixing the Surface-mounted toilet tissue dispenser with Hood for Single roll B 6699 shall be type-304 stainless steel with bright polished finish. Skirt shall be 22 gauge (0.8mm) with all-welded construction. Shell and flange shall be 22 gauge (0.8mm) and have drawn, one-piece, seamless construction. Unit shall be equipped with 18-gauge (1.2mm) hood hinged to shell. *Spindle shall be chrome-plated plastic with a heavy-duty internal spring etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
190
-
2908.54
Supply and Fixing the Surface-mounted sanitary napkin disposal B 254 shall be type-304 stainless steel with all-welded construction, exposed surfaces shall have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall have a self-closing panel covering disposal opening. Panel shall have bottom edge hemmed for safety, be secured to door with a spring-loaded, full-length stainless steel piano-hinge, and equipped with an international graphic symbol identifying sanitary napkin disposal. Unit shall be furnished with a removable, leak-proof, rigid moulded polyethylene receptacle. Receptacle shall have a capacity of 1.2-gal. (4.6-L)etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
95
-
12270.42
Supply and Fixing the Surface-mounted sanitary disposal bag dispenser B-3541 shall be type-304 stainless steel and Exposed surfaces shall have satin finish. Cover shall snap off wall plate for refilling. and Unit shall have a capacity of one sanitary disposal bag box etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
95
-
5362.63
Supply and Fixing the Coat hook with Bumber B 212 of solid cast aluminum with matte finish and Unit shall be equipped with hard rubber bumper etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
174
-
1109.11
Supply and Fixing Classic Surface Mounted Paper Towel Dispenser of apers) B-262 .1.(a)Towel Mate Accessory dispenses one paper towel at a time without towels sagging or falling through towel tray opening. Round nylon rod and stainless steel rod screws support stack of paper towels.(b) Locking: Tumbler lock keyed like other washroom accessories.(c) Capacity: 400 C-fold or 525 multifold towels 2-1/2 inches to 3-1/8 inches (65 to 79mm) deep.2. Door: 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish. 3. Cabinet: All-welded, 18-8, Type 304, 22 gauge (0.8mm) stainless steel with satin finish on exposed surfaces.4. Cabinet Back: Formed to recess mounting slots to prevent mounting screw heads from snagging towels.5. Hinge: Full-length stainless steel piano-hinge.6. Towel Dispensing: Hemmed towel tray opening dispenses towels without tearing.7. Filling: Door swings down for loading towels into cabinet.8. Refill Indication: Two slots on each side of cabinet indicate refill time. etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
16
-
4271.92
Supply and Fixing Towel Mate Accessory 4" Deep paper Towel Dispensers of 262 -130 module shall be Type-304 stainless steel with 2B finish. Black nylon support rod, 3/8" (10mm) diameter, fastened to module with stainless steel sheet metal screws. TowelMate Accessory fits into Bobrick Model number B-262, Paper Towel Dispenser fitted with TowelMate Accessory shall dispense 525 multifold paper towels. TowelMate Accessory Module has Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening). TowelMate reduces paper towel waste by 20% – 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative. etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
16
-
2272.3
Supply and Fixing Straight Grab Bar 32mm Dia 600 mm length,B 5806 type-304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 1/8" (3mm) thick stainless steel plate, 2" x 3‑1/8" (50 x 80mm), and equipped with two screw holes for attachment to wall. Flange covers shall be 22-gauge (0.8mm) stainless steel, 3-1/4" (85mm) diameter, and shall snap over mounting flanges to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
16
-
2436.13
Supply and Fixing Swing Up Grab Bar with Counter weigh mechanism to avoid immediate fall of the grab bar- B 4998 finished with Satin finish, Compliance: ICC/ANSI A117.1 Accessibility Standards. Designed to support 250 lbs (113 kg) in compliant installations.Grab Bar Materials: 18-8, Type 304, stainless steel tubing with satin finish. Grab Bar Construction: 18 gauge (1.2 mm), ends heliarc welded to flanges. Outside Diameter: 1-1/4 inch (32 mm).
6. Backplates: 18-8, Type 304, 3/16 inch (5 mm) thick, satin finish stainless steel; with four screw holes for attachment to wall. Operation: Manually raised for approach or departure and lowered to horizontal position for support. Once bar is raised more than 45 degrees from horizontal position, counterweighted design prevents bar from falling etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (Bobrick/Equivalent)
16
-
21059.9
WATER SUPPLY SYSTEM
-
-
-
Supply and Fixing Polyethylene-Aluminium-Polyethylene (PE-ALPE) composite pressure pipes conforming to IS-15450-2004 with UV stabilized, carbon black for hot &cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete for external works including laying pipes, fixing in position, testing and commissioning etc, including cost and conveyance of materials, labour charges for fixing and all taxes Excluding GST etc., complete for finished item of work.
-
-
-
20 mm OD pipe
2300
-
218.14
25 mm OD pipe
1650
-
269.27
32 mm OD pipe
1420
-
355.61
40 mm OD pipe
800
-
462.41
50 mm OD pipe
275
-
593.75
Supply, Laying, jointing, fixing, testing and commissioning of 63mm x 5.8mm PN 10 /PPR pipe conforming to DIN Standards including all incidental and operational ,and labour charges ,including all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
-
-
-
63 mm Dia.
450
-
614.2
Providing, laying, jointing, fixing, testing, painting, commissioning of 100mm diamter GI CLASS B medium quality type pipe of approved make conforming to IS:1239, including cost of GI specials, cutting the pipes to the required lengths, threading, jointing the pipes, chiselling,making holes necessary in walls & floors, clamping to walls / ceiling supports at each interval of 1.5 mtr using fabricated MS brackets(50x50x5mm Angle or 50 x6mm Flat) of approved design, GI threaded 16mm diamter U clamps on the bracket, HITECH pipe supports & restoring the walls & floors to the original conditions etc., and the exposed surface of the pipes to be painted with 2 coats of synthetic enamel paint over a one coat of metal primer,the entire piping system in part or as a whole has to be tested to a hydraulic test pressure of 7 kg/sq.cm for a period of not less than 24 hours and the piping shall be concealed / commissioned only after satisfactory testing of the system,including all incidental and operational ,and labour charges ,including all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Makes :TATA 'B' Class/Equivalent)
-
-
-
100 mm dia
300
-
1231.98
Supplying and Fixing of Bronze Ball valve with SS Ball and SS Spindle as per IS - Class -I, Indian make heavy type of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
-
-
-
Ball valve 25mm NB size
30
-
518.54
Ball valve 32 mm NB size
18
-
857.11
Ball valve 40 mm NB size
40
-
1150.24
Supply and Fixing of DI(Ductile Iron )water Butterfly Valves onforming to IS 3095 Manufacture, supply and delivery of DI (Ductile Iron) Wafer Butterfly valves conforming to IS 13095 and with hand lever below 150 mm and Worm Gear 200 mm,of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
-
-
-
50 -PN-10
16
-
6692.49
65 -PN-10
20
-
7213.81
100 -PN-10
10
-
11068.26
Supply and Fixing of GI union nominal sizes with Ist Quality,including necessary fittings ,of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
-
-
-
30 mm Dia
28
-
117.07
40 mm Dia
12
-
139.97
50/60 mm Dia
8
-
174.33
Supply and Fixing in position 65mm dia flanged Cast Iron dirt box Y-Type Strainer having body fabricated in Cast Iron and strainer made of SS perforated sheet having perforations of suitable size.,of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels. (Make:RB/NVR/LEHRY/Equivalent)
-
-
-
65 mm dia
2
-
4042.42
Supply, installation, testing and commissioning of 25 mm dia Air Release Valve of approved make including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
16
-
1555.28
Supply and fixing of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1/2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings.including transportation ,of approved make including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
2
-
12336.37
Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2,of approved make including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes : HGURU / FIEBIG/ Equivalent)
6
-
801.67
Supplying and Fixing of FRP Moulded Grating of 38 mm thickness and rib thickness of 5-7 mm with Mesh size of 40 X 40 mm and taking load of UDL 8000 Kgs @ span of 450 mm with a deflection of 7mm and concentrate load of 2500 Kgs @span of 450 mm wiith a deflection of 7 mm with a approved colour,of approved make including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
22
-
4862.8
Supply and Fixing of G.I. vent 100mm diawith brass mosquito proof coupling and air filter including return bend, using with hot dip galvanized ,of approved make including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :Saint gobain /Neco/Equivalent)
16
-
965.8000000000001
Supply and Fixing Manhole foot rests size Pvc encapsilated to be provided in RCC walls / brick walls ,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
80
-
211.32
Supply and Fixing G.I Puddle Flanges with screwed ends, cap and plain for embedment in concrete as necessary with suitable accessories, consumables welding accessories including placing in position, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :JINDAL/TATA/Equivalent)
-
-
-
25 mm Dia
5
-
1079.35
50 mm Dia
4
-
1647.42
65 mm Dia
6
-
3010.7999999999997
80 mm Dia
6
-
4146.95
100 mm Dia
4
-
6021.6
150 mm Dia
4
-
7157.75
Supply and Fixing GI slotted angle iron tray 100x50x3 mm thick suspending from roof with necessary expandable anchor fasteners on RCC spaced not exceeding 600 mm with 15 mm dia G.I. spacer between wall & angle, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
100
-
738.5
Supply and Fixing Digital water level controller , digital display of water level in the tank, trigger the opening of solenoid valve when the water level reaches low level, including fixing necessary stainless steel sensors, float level switch, probes, etc. The control cabling from solenoid valve to OHT shall have to be done by qualified electrical contractor only, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.(Make:LEHRY/NIVELLCO/Equivalent)
2
-
11361.5
Supply and Fixing Digital percentage level indicator for water storage tanks consisting of display unit and level sensor and the display unit should have 2-1/2 digit seven segment LED to display the levels as 0%, 10% --- 100%. The unit should be weather proof and wall / panel mounted input to the unit should be 230V AC. The level sensor should consists of float operated magnetic float switch with one PUF float suitable mounting flange and flame proof enclosure etc., as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.(Make:V-Gaurd/Equivalent)
2
-
2045.07
Supply and Fixing 40 mm Dia Electrically operated Solenoid valve to be mounted on the over head tank incoming line with power supply 220V/24V/50 Hz unit of suitable for following diameter pipe lines with 3Core x 2.5 Sqm armoured copper cable of length 20 mtrs required accessories etc., as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.(Make:NVR/RB/LEHRY/Equivalent)
2
-
8521.130000000001
Supplying and Fixing of Washing Hydrant /Garden Hydrant outlet consisting of Bronze Ball 20 mm thick valve with SS Ball and SS Spindle as per IS - Class -I, Indian make heavy type of approved make brass nozzle for connecting rubber hose including pipes, fittings, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
20
-
391.29
Internal & External Piping System
-
-
-
Supply and Fixing of Stainless steel 100 mm dia round Grating with frame for nahany or floor trap cover with or without hole of approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
374
-
65.9
Supply and Fixing of 40 mm nominal size dia PVC solid waste pipe to connect wash basin/sinks outlets with necssary sealants etc,approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
198
-
101.19999999999999
Supplying & fixing of Single Socket PVC/SWR pipe - 6 Kg/sq.cm,with Single Tee ,Plain Bend 87.5 Degree ,Door Bend 87.5 Degree -Pipe Clip - UPVC/SWR Pipe fittings,100 ml - Solvent Cement as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White), per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
-
-
-
75 mm Dia
2050
-
333.42
110 mm Dia
3820
-
504.6
Supply and Fixing of 160 mm Dia Unplasticised PVCs Pipes pressure rating 6 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with ,Single Tee,Door Bend ,bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etcapproved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1400
-
676.53
Supply and Fixing of 50 mm Dia Unplasticised PVCs Pipes pressure rating 6 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
700
-
181.33
Supply and Fixing of 200 mm Dia B-Class,Socket and Spigot Centrifugally Cast (Spun) Iron pressure pipes for water, Gas and Sewage conforming to specification No: IS 1536/2001 (third revision) with White lead jointing, including fixing of M.S. clamps if necessary with required no. of Bombay nails etc.including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
370
-
4632.47
Supply and fixing of approved make UPVC/SWR vent cowl with necessary accessories etc., complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
75 mm dia
16
-
27.27
110 mm dia
16
-
32.95
Core cutting the RCC slabs & walls thickness or depth upto 300 mm with using Core cutting machine , for laying pipes and finished to original surface with the in CC 1:2:4, etc., as per approved drawing , including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
20 mm Dia
300
-
511.27
50 mm Dia
4
-
568.08
65 mm Dia
6
-
624.89
80 mm Dia
6
-
681.7
110 mm Dia
4
-
738.5
125 mm Dia
1104
-
908.92
150 mm Dia
4
-
965.73
Rain water Disposal System
-
-
-
Supply and Fixing of 160 mm Dia Unplasticised PVCs Pipes pressure rating 6 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with ,Single Tee,Door Bend ,bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., as per approved drawing , including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1500
-
676.53
Supplying & fixing of CI grating of size 200 X 200 mm for inlet of rain water pipes at terrace level in CM 1:2, including making hole in the roof, setting in position and forming smooth rain water inlet gutter to direct rain water into the rain water pipe etc., complete per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels. (Makes : Thermodrains/Equivalent)
16
-
2840.38
Construction of Sub soil well(RAIN WATER HARVESTING PIT) with Brick Masonary Wall of 1200mm dia with a depth of 3000 mm with Plastering to Brick Masonary to a width of 0.23 on top and inside and outside of width 230mm height, including excavation, as directed by the site Engineer-in-charge etc.,complete.Rain Water Harvesting at different locations as per the approved drawing for depth of 30 mtrs Including a) Drilling bore hole of 150mm dia with rotary or reverse rotary process upto 30 meter depth complete to the satisfaction of Engineer-in-Charge.b) Lowering Upvc slotted pipe 160mm dia 6 Kg per Sq. Cm pressure complete with solvent cement joint and cap as per the satisfaction of Engineer-in-Charge. c) Providing and filling Sand/ washed gravels / pea gravels around Upvc pipe as per the requirement and satisfaction of Engineer-in-Charge.
2
-
44663.6
Providing and laying of 450 mm dia Reinforced Cement Concrete Hume Pipe of NP3 Class of the following dia Plain Ended Tongue and Groove Model Pipe for culverts including cost and Conveyance of Pipe, all taxes excluding GST, all labour charges for lowering, laying and jointing of Pipes in position with Cement Mortar CM (1:2) including lifting, aligning, lowering and hoisting etc., as per drawing and as per MORTH specification 2900, 2905 and 2906 (4th Revision) and as directed by the Engineer-in-charge for finished item of work. (FOR PIPE CULVERTS)
10
-
2014.6
Providing Mild Steel, Structural Steel, I.e., Angles, Channels,Beams and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Angles, Channels,Beams and I sections, including cost of welding rods, power charges, including cost of fixing in position etc,inluding all taxes Excluding GST etc,including fixing in position for complete finished item of work as aper approved drawing as directed by Engineer-In -Charge.
7000
-
132.19
SEWERAGE TREATMENT PLANT
-
-
-
Supply, installation, testing & commissioning of Galvanized Iron(GI) Steel Coarse Perforated Screen of size 600 mm Wide X 800 MM high with suitable lifting arrangement,and Screen shall be fabricated with 6mm thick GI rods with a spacing of 8mm and painted with Fibre Reinforced Plastc(FRP) coat etc,omplete per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
1
-
65896.7
Supply and Fixing of MS hot dip galvanized puddle flanges in accordance to BS:10 table D as required to be provided (in the structural slab and wall) of various diameters. Puddle flanges shall be fixed to the required levels & position as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :JINDAL/TATA/Equivalent)
-
-
-
25 mm Dia
5
-
1079.35
50 mm Dia
5
-
1647.42
65 mm Dia
5
-
3010.7999999999997
80 mm Dia
10
-
4146.95
100 mm Dia
10
-
6021.6
150 mm Dia
10
-
7157.75
Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts etc,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :JINDAL/TATA/Equivalent)
4
-
20450.7
Supply,Installation ,Testing & Commissioning approved make vertical Non -clog type submersible pump of capacity 7.50 cum/hour and 12 mts head, made of Cast Iron Construction .Impeller shaft shall be S.S construction with mechanical seal suitable for building application and the unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protectionwith including necessary Base plates,Coupling,Nylon ropes for lifting pumps with necessary cables etc,complete.as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :ITT/CRI/Equivalent)
2
-
41469.48
Supply,Installation ,Testing & Commissioning of Fine Bubble Diffusers with necessary piping installed in the aeration tank .Non - buoyant tubular fine bubble diffusers supported and moulded in EPDM(Ethylene Propylene Diane Monomer) Rubber Accessories. Central PVC Tee with yoke for uniform air distribution,90mm Dia X 1000mm Long PVC 10KG/Sq. Cm slotted pipes with threaded end caps,SS clamps & ear clips,Braided PVC Air Hose & Nylon Hoisting ropes etc., complete as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :Air Flex/Sanlee/SS Aerations/Ppaquatech / Equivalent)
22
-
2499.53
Supply ,Installation ,Testing & Commissioning of Diffused Air System for Collection TanK with Polyurethane material annd Coarse bubl fixed type with 80 mm dia and capacity of 4.00 Cum/Hour etc., complete as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :Air Flex/Sanlee/SS Aerations/Ppaquatech / Equivalent)
10
-
2113.2400000000002
Supply,Installation ,Testing & Commissioning of Positive displacement, horizontal, Twin lobe compressors with capacity of 225 Cum/Hour at 0.50Kg /sq cm pressure and made with Cast iron with 5.50 Hp ,to supply air to the aeration tank. The unit will include TEFC motor, common base plate, v belt pulley, air filter, silencers, a pressure gauze, safety valve and a NRV is provided in the discharge end etc, complete as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :Everest/Kay/Kulkarni/ Vishwakarma / Equivalent)
2
-
221549.25
Supply, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
100 mm Dia
14
-
1586.52
80 mm Dia
15
-
1113.79
65 mm Dia
20
-
837.39
50 mm Dia
20
-
659.38
40 mm Dia
20
-
491.63
Supply,Installation of Fluidized Bed with Bio Pack Media of suitable quantity of P.P to the Aeration tank ( Final HRT Should be 8 Hours to be Maintained) using with material PVC Hexogonal shape etc., as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :MM Aqua/Equivalent)
4100
-
210.19
Supply,Installation ,Testing & Commissioning approved make Vertical non -clog type submersible pump of 5.00 Cun/Hour at Head of 25.00 Mts with 3.00 HP,made with Cast Iron,Impeller shaft shall be S.S construction with mechanical seal suitable for building application. The unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protection wiht including necessary Base plates,Coupling,Nylon ropes for lifting pumps with necessary cables etc, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :DP/CRI/Equivalent)
2
-
41469.48
Territary Water Treatment Plant
-
-
-
Supply,Installation ,Testing & Commissioning centrifugal Mono block pumps with 2.00 HP and 7.50 cum/hour with 35.00 mts head with suitable TEFC motor suitable for 415 V,3Phase, 50Hz & Insulation -Class F,IP 68 Protection,the pumps is for Lifting water for Treatment Plant etc, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes :DP//ITT/CRI/Equivalent)
2
-
41469.48
Supply, installation, Testing & commissioning of Activated Carbon Filter ,with size of the vessel 1000 mm Dia and 1500 mm Height with working velocity of 10 mts/Hour and capacity of 7.50cum/hour and One vertical cylindrical pressure filter with dished ends made of Mild Steel (Vessel fabricated with 3mm thick sheet) with Epoxy Painted (Internally & Externally) with suitable nozzles and manhole,with design Pressure: 3 Kg per Cm2,Filter Media: Activated Carbon – One Charge,Pressure guages to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration with approved multi port valve,including with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The filter shall be made of M.S with necessary protective coating. The cost of filter shall also include initial charge of under bed & Activated carbon filter media to suit the requirement completed etc, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
266995.25
Supply, installation, Testing & commissioning of Pressure Sand Filter with size of the vessel 1000 mm Dia and 1500 mm Height with working velocity of 10 mts/Hour and capacity of 7.50 cum/hour @ 150cum/Day with one vertical cylindrical pressure filter with dished ends made of Mild Steel (Vessel fabricated with 3mm thick sheet) with Epoxy Painted (Internally & Externally) with suitable nozzles and manhole. Design Pressure: 3 Kg per Cm2,Filter Media: Coarse Sand -One Charge,Pressure guages to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration with approved multi port valve with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The filter shall be made of M.S with necessary protective coating. The cost of filter shall also include initial charge of under bed & sand filter media to suit the requirement completed etc, as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
224957.7
Supply, installation, Testing & commissioning of Water Softener with Size of the Vessel : 1600 mm Dia X 1500 mm Height with capacity of 7.50 cum/hr @150 cum/day design pressure :3.00 Kg/Sqm One vertical cylindrical pressure filter with dished ends made of Mild Steel (Vessel fabricated with 3mm thick sheet) with Epoxy Painted (Internally & Externally) with suitable nozzles and manhole, and One vertical cylindrical pressure filter with dished ends made of Fibre with suitable nozzles and manhole with Design Pressure: 3 Kg per Cm2 ,Filter Media: acidic cation exchanger , One charge and Pressure guages to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration with approved multi port valve with strongly acidic cation exchanger in sodium ions and thus produce soft water of less than 50ppm(Raw Water Hardness -400ppm).the plant for soft water for following OBR with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The cost of filter shall also include initial charge of media to suit the requirement etc,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Make:Resin-Ion Exchan/Thermax/ Equivalent)
1
-
782807.35
Supply,Installation ,Testing & Commissioning of Electronic dosing system with chlorination tank size with capacity 800 Litres and with Maximum flow rate of 2.00 Cum/Hr @ 20.00 Hr Cycle,Maximum working pressure 3.00 Kg/Sqcm and range :2-10 PPM and dosing is done 2.00 cum/hr, for dosing chlorine in to the treated water with pre-set dosage based on the quantity of water. The dosing system shall consist of Electronic dosing pump with positive displacement type with adjustable stroke length and frequency including FRP chemical solution tank,necessary electrical , to make the operation automatic etc,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
21018.78
Supply,Installation ,Testing & Commissioning of UV Purifier with a Stain less Steel- 316 Construction & Power Panel etc,,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Ulfa/Good Life/Equivalent)
1
-
90892
Supply and Fixing of Unplasticised PVCs Pipes pressure rating 6 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
63 mm dia
100
-
214.28
50mm dia
100
-
181.33
40 mm dia
100
-
163.15
32 mm dia 10Kg/CM2
100
-
164.29
Providing, laying, jointing, fixing, testing & commissioning of required UPVC SCH-40 valves and instruments for processing in treatment plant and necessary chiselling the walls / floors, making holes, clamping to walls and restoring the same to original conditions etc., as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
Valves
-
-
-
65 mm Dia
20
-
2840.38
50 mm Dia
20
-
1778.08
40 mm Dia
20
-
852.12
32 mm Dia
20
-
568.08
Pumps & Motors
-
-
-
Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydro pneumatic System as Follows:
a. Vertical, In-Line, Multistage, centrifugal pumps with SS-304 casing, impeller, shaft and bottom housing (with mechanical seal)
b. Pumps shall be fitted with Energy Efficient Level 1 Motors,The pump shall be selected for performance at best efficiency point. However, the pump selection shall be suitable for performance with set point @ + 20% of the rated head. c. A separate microprocessor PID controller and frequency inverter integrated in a single panel or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection d. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor)
-
-
-
e. Pre charged diaphragm pressure vessels with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete, of the capacity indicated in Bill of Quantities
f. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete
g. Accessories like pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)
h. GI suction and delivery header with flanges for inlet connection, common outlet header with flanges for outlet connections as required, and inter connecting piping with flexible connections, Class C GI suction pipe line eccentric type reducers etc. all necessary indigenous accessories as required to complete the installation.
i. The power supply cable through aluminum conductor armored cable shall be extended upto Control panel and all other cabling/ interconnections between control panel and Pump motors/ Control wiring shall be included in the scope of work
j. submit performance curves and technical catalog of the proposed model for review & information
-
-
-
Supply, Installation, Testing And Commissioning the Domestic Water Distribution System: System capable of 20 Cum/Hour and the No of Pumps 2 working + 1stand by with 5 HP with each pump discharge of 10.00 Cum/Hour and the head with 90.00Mts (9.0 Kg/Sqcm) and 1 No of 480 Ltrs Diaphragm presuure vessel delivering following discharge and Head requirements with isolation and non return valves,control panel all mounted on a base frame and with all internal wiring complete as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Model:MVHS-10/12T-3-P)(Make:CRI/Equivalent)
3
-
196575.92
Supply, Installation, Testing And Commissioning the Flushing Water DistributionSystem: System capable of 10 Cum/Hour and the No of Pumps 2 working + 1stand by with 3 HP with each pump discharge of 5.00 Cum/Hour and the head with 80.00Mts (8.0 Kg/Sqcm) and 1 No of 480 Ltrs Diaphragm presuure vessel delivering following discharge and Head requirements with isolation and non return valves,control panel all mounted on a base frame and with all internal wiring complete as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Make:CRI/Equivalent)
3
-
170607.7
Supply, delivery, testing, commissioning of De-watering submersible pump made of Cast Iron Construction System capable of 10 Cum/Hour and the No of Pumps 1 working + 1stand by with 4 HP head with 20.00Mts .Impeller shaft shall be S.S construction with mechanical seal suitable for building application..The unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protection and Automatic ON/OFF Level Switch, ,Base plates,Coupling, Nylon ropes for lifting pumps with necessary control cables etc, per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge(Make: CRI/Equivalent)(Drain water lifting pump from drain sumps)
4
-
36546.54
Supply, delivery, testing, commissioning of De-watering submersible pump made of Cast Iron Construction System capable of 5.00 Cum/Hour and the No of Pumps 1 working + 1stand by with 3 HP head with 15.00Mts .Impeller shaft shall be S.S construction with mechanical seal suitable for building application..The unit shall include TEFC motor suitable for 415V,3Phase,50Hz & Insulation -Class F,IP 68 Protection and Automatic ON/OFF Level Switch, ,Base plates,Coupling, Nylon ropes for lifting pumps with necessary control cables etc, per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge(Make: CRI/Equivalent)(Drain water lifting pump from Pump Room)
4
-
24523.23
WATER TREATMENT PLANT
-
-
-
Supply, installation, Testing & commissioning of Water Softener with strongly acidic cation exchanger in sodium ions and thus produce soft water of less than 50ppm ( Raw Water Hardness - 600 ppm).the plant for soft water in a period of 6 hours operation for following OBR with capacity of 10 Cum/Hour @ 100 cum ,with One vertical cylindrical pressure filter with dished ends made of FRP (8mm Thick) with suitable nozzles and manhole of deisgn pressure 3 Kg per sqm.Filter Media: Activated Carbon Capacity : One Charge,Pressure guages to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration as per standards ,Multiport valve with necessary accessories,Size of the Vessel : 1600 Dia. X 1500mm height, with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The filter shall be made of MSEP vessel with necessary accessories.. The cost of filter shall also include initial charge of media to suit the requirement etc, per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
421815.01
Supply, installation, Testing & commissioning of Pressure Sand Filter with capacity of 10 Cum/Hour @ 100 Cum,One vertical cylindrical pressure filter with dished ends made of FRP (8mm Thick) with suitable nozzles and manhole. Design Pressure for 3 Kg per Cm2,Filter Media: Coarse Sand , Capacity : One Charge,Pressure gauges to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration as per standards ,Size of the Vessel : 1100 dia X 1500mm height,Multiport valve with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The filter shall be made of MSEP vessel with necessary accessories. The cost of filter shall also include initial charge of under bed with pebbles & Coarse Sand media to suit the requirement etc.per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes:Ion Exchange/Eversure/Revolve/ Thermax / Equivalent)
1
-
102443.23999999999
Supply, installation, Testing & commissioning of Activated Carbon Filterwith capacity of 10 Cum/Hour @ 100 Cum,One vertical cylindrical pressure filter with dished ends made of FRP (8mm Thick) with suitable nozzles and manhole. Design Pressure for 3 Kg per Cm2,Filter Media: Activated Carbon Capacity : One Charge,Pressure gauges to indicate loss of head (Which indicates when back wash is necessary),Floating message for operation and regeneration as per standards ,Size of the Vessel : 1100 dia X 1500mm height,Multiport valve with necessary accessories complete with frontal piping,valves,suitable supports for mounting pressure gauges,orifice plates. The filter shall be made of MSEP vessel with necessary accessories. The cost of filter shall also include initial charge of under bed with pebbles & Activated carbon filter media to suit the requirement etc.per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes:Ion Exchange/Eversure/Revolve/ Thermax / Equivalent)
1
-
112668.59
Supply of Horizontal 4 Stage Centrifugal Pump of 2HP ,with suitable capacity of 10Cum/Hour and using No of pumps 1 working + 1standby with the delivery head of 30.00 mts with using 415V, 3-phase,50Hz motor and coupling with base frame having following mentioned capacities from all causes, with starter consists of suitable MPCB, Cont actor, Overload relay, Single Phase Prevent or, Push buttons, LED on indicators, all in comings in Weather Proof box and necessary suitable copper cables from starter panel to pump etc., complete as required. etc.per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Pump for water treatment plant includes auto on/off water level controller for pump.)(Makes:CRI/KIRLOSKAR/ Equivalent)
2
-
48488.05
Supply,Installation ,Testing & Commissioning approved make Electronic dosing system for dosing chlorine in to the treated water with pre-set dosage based on the quantity of water.The dosing system shall consist of Electronic dosing pump with positive displacement type with adjustable stroke length and frequency.The quoted rate shall also include FRP chemical solution tank,necessary electricals complete to make the operation automatic etc,as per approved drawing and approved make, including cost and conveyance of all materials, all incidental and operational charges, all labour charges and transportaion charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge (Makes:E-DOSE/M-ROY/Equivalent)
1
-
39500.53
Modular Furniture
-
-
-
Supply and Installation of Reception Table TG58 of Size 4800 X 950 X 1100 and Finish:Veneer +Lacquer Painting +Artificial Marble ,Configuration: Reception desk with LCD Display area and space for CPU and storage area. Structure: Wooden veener. Wiring : Hidden cable management.Hardwares:FGV damping hinges,touch-bound system, USB Charger. The cabinet is 45° diagonally spliced, and the edge R1 is safely processed. Panel, bottom plate, side panel 2mm solid wood edge banding, Outer side panel, leg cutting angle, hand-stitched, and the outer frame panel is exposed without screws Dabao/Zhanchen Environmental-friendly open coating + meteor grey Using water as solvent, saving a lot of resources; eliminating the risk of fire during construction; reducing air pollution; using only a small amount of low-toxic alcohol ether organic solvent, improving working environment conditions,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
1001905.92
Supply and installation of Reception Chair HUP-CHO62SW -675 X 570 X 935.Back: greyish white adjustable mesh back. Armrest: Adjustable polished aluminum armrest (3D) Move back & forth within the range of 30mm, Adjust the height of armrest within the range of 100mm, Move left & right within the range of 20mm.Seat:Greyish white shell. Mechanism: Automatically tension control system with Four-Position locking and sliding function. Base: Greyish white nylon five-star base with PU castorsthe agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
43866.75
Supply and installation of Sofa Set Flower6-Size:2700 x 2700 x 760 x 420 -L shape Sofa with Fabric Finish. FABRIC :Here is the fabric type we use for Lounge & Sofa.Thick fabirc texture, 220±15gram/sqm * Thin fabric texture, 220±15gram/sqm Weight :340 Grams per liner metre* Resistance fabric with Dupont special layer. Anti-warter and dust.*Abrasion : In excess of 60000 cycles*Matinadale Abrasion tester at 12KPA presuer. *Flammability : BS En 1021-1: 1994(Cigrarette) BS 7176 : 1995 Low Hazard Flammability performanceis dependent on the combination of material used. METAL :Here are the steel parts/legs used for loose furniture
1. Q195(Yied Srength =195 MPA) stainless steel Φ22 1.5mm thickness
2. Q195(Yied Srength =195 MPA) stainless steel Φ13 1.7mm thickness
3. Q195 (Yied Srength =195 MPA) stainless steel Φ13 1.8mm thickness
4. Steel leg with chrome finished. FOAM:*Trim foam and injection foam used*Trim foam 560 ployether, TDI methylbenzene. Density:27.6±5%kg/m³, 30kg/m³, 34kg/m³.*Injection foam: Density: 50kg/m³, 60kg/m³*Durability: The foam has to hold up through use without losing its original properties.*Flame Retardant additives, used to improve a foam’s resistance to ignition or burning.the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
8
-
218208.97
Supply and installation of POUF SF37.YJD.MR -Dia 420 X 420 -Stool with Fabric Finish and White Basement.Fabric Details :1. Fabric woven fabric 100% polyster , 2. Color fastness to washing : ISO 105 C10: 2006 : machine wash at 40*C with 5G/l sopa solution an dwith 10 steel balls 3.Color fastnes to rubbing : ISO 105-x12:2001 sizeof rubbing finger : 16mm diameter 4. Tensile strength : ISO 13934-2: 2014: CRE-25mm grab 5.Tearing stregth : ISO 13937-1:2000cor 1:2004: elmendorf tear 6.Seam slippage : ISO 13936-2:2004/ Seal slippage at 180N 7. Pilling resistance : Iso 12945-2:2000: martindale abrasion & Pilling tester , total load applied 415g,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
12
-
15466.41
Supply and installation of POUF *SF37.HJD.MR-460 X 450 X 430 -Stool with Fabric Finish. Fabric Details :1. Fabric woven fabric 100% polyster , 2. Color fastness to washing : ISO 105 C10: 2006 : machine wash at 40*C with 5G/l sopa solution an dwith 10 steel balls 3.Color fastnes to rubbing : ISO 105-x12:2001 sizeof rubbing finger : 16mm diameter 4. Tensile strength : ISO 13934-2: 2014: CRE-25mm grab 5.Tearing stregth : ISO 13937-1:2000 cor 1:2004: elmendorf tear 6.Seam slippage : ISO 13936-2:2004/ Seal slippage at 180N 7. Pilling resistance : Iso 12945-2:2000: martindale abrasion & Pilling tester , total load applied 415g,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
12
-
11810.28
Supply and installation of Center Table T167.800 -Size:800 X 800 X 420 -Finish:Full Veneer tabletop with meteor Grey painting bottom Configuration:square table structure: 1.5mm thickness Loop shape leg in grey painting finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
36
-
34306.05
Supply and installation of Bar Counter Chair Leg: Beech SD31.1.MR.M -Size:500 X 560 X 980X670 Fabric seating with wooden leg,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
118
-
44148.52
Supply and installation of High Bar Counter Table DIX71.180080 -Size::1800 X 800 X 1050 of 3Nos -Table top 25mm E0 grade melamine with 2.5mm ABS edge banding,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
154587.98
Supply and installation of Coffee Table T187.114098 -Size:1140 X 980 X 280 - Table with Wooden Table Top & Steel Base. Table top :18MM thk understructure with 12mm thk dia leg with Ms-powder coated finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
35712.6
Supply and installation of Coffee Table T185.061045 -Size:610 X 450 X 420- Table with Wooden Table Top & Steel Base. Table top :18MM thk understructure with 12mm thk dia leg with Ms-powder coated finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
13497.46
Supply and installation of Waiting Lounge Chairs SN30.1.MR.D -Size:590 X 670 X 980 X 440 Middle Back Single Seat Sofa with Knit Mesh Back & Fabric Seat Black Wooden Basement,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
6
-
38524.57
Supply and installation of Waiting Lounge Chairs/CASUAL SOFA SEATING SF43.1.YR.G -Size:680 X 620 X 840 X 460-Fancy stitching: 1# double needle; Backrest: high rebound setting sponge; Foot type: black steel feet; G: represents the iron pipe foot,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
56
-
63832.32
Supply and installation of Leasure Seating S322.2.MR -Size:1500 X 780 X 745 X 430 -Two-seat Sofa with fabric Finish.FABRIC :Here is the fabric type we use for Lounge & Sofa.Thick fabirc texture, 220±15gram/sqm * Thin fabric texture, 220±15gram/sqm Weight :340 Grams per liner metre Resistance fabric with Dupont special layer. Anti-warter and dust. *Abrasion : In excess of 60000 cycles Matinadale Abrasion tester at 12KPA presuer. *Flammability : BS En 1021-1: 1994(Cigrarette) BS 7176 : 1995 Low Hazard Flammability performanceis dependent on the combination of material used. METAL :Here are the steel parts/legs used for loose furniture
1. Q195(Yield Strength =195 MPA) stainless steel Φ22 1.5mm thickness
2. Q195 (Yield Strength =195 MPA) stainless steel Φ13 1.7mm thickness
3. Q195(Yield Strength =195 MPA) stainless steel Φ13 1.8mm thickness
4. Steel leg with chrome finished. FOAM:*Trim foam and injection foam used*Trim foam 560 ployether, TDI methylbenzene. Density:27.6±5%kg/m³, 30kg/m³, 34kg/m³.*Injection foam: Density: 50kg/m³, 60kg/m³ ,*Durability: The foam has to hold up through use without losing its original properties.*Flame Retardant additives, used to improve a foam’s resistance to ignition or burning. (Unfortunately, these tend to have a negative influence on the comfort, support, and durability of the foam.)Mesh frame:D18mm Hollow steel tube Fabric Details :1. Fabric woven fabric 100% polyster , 2. Color fastness to washing : ISO 105 C10: 2006 : machine wash at 40*C with 5G/l sopa solution an dwith 10 steel balls 3.Color fastnes to rubbing : ISO 105-x12:2001 sizeof rubbing finger : 16mm diameter 4. Tensile strength : ISO 13934-2: 2014: CRE-25mm grab 5.Tearing stregth : ISO 13937-1:2000cor 1:2004: elmendorf tear 6.Seam slippage : ISO 13936-2:2004/ Seal slippage at 180N 7. Pilling resistance : Iso 12945-2:2000: martindale abrasion & Pilling tester , total load applied 415g,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
8
-
103480.54
Supply and installation of Centre Table T194.120060 -Size:1200 X 600 X 280 - Table with Wooden Table Top & Steel Base. Table top :18MM thk understructure with 12mm thk dia leg with Ms-powder coated finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.( Make:SUNON/ Equivalent)
2
-
26714.29
Supply and installation of CAFETERIA TABLE DB78.08 -Size:750 X 750 X 743 - CONFIGURATION : rectabgle TABLE TOP:Table top is made of 25mm E0-grade Melaminae with 2.5mm ABS edge banding straight LEGS : balance 36dia tube leg with frame with necessary hardware,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
96
-
20501.83
Supply and installation of CAFETERIA TABLE DB78.18 - Size:1800 X 750 X 743 - CONFIGURATION : rectagle TABLE TOP:Table top is made of 25mm E0-grade Melaminae with 2.5mm ABS edge banding straight LEGS : balance 36dia tube leg with frame with necessary hardware ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
3
-
27276.69
Supply and installation of CAFETERIA CHAIRS MAGNA-CMG12GS-Size:525 X 525 X 820 -Finish:PP Frame with chrome metal support Back & PP back with PP seat Shell:22mm thickness 1.6 Quadripod without armrest base: metal base in chrome finish.Features : *The bow leg work with buckles,helping the chairs stand side by side steadily. *The Stackable Function of chair helps the effective Utilization of space,Meeting all kinds of need for different enivironment. *Easy for cleaning,and also recyclable which helps environmental protection. Environmental (93% recyclable & 46% recycled) :BIFMA ,GREEGUARD Certified, Base / frame finish : Metal base in chrome finish ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
410
-
7873.52
Supply and installation of WORK STATION Table top: 1200 X 628 X 750 screen: 1180X350X10 SCREENS ABOVE TABLE : 8MM thk Fabric screen with PVC filler Melamine Screen SCREEN HOLDING BRACKETS : The screenHolder connects with the desk top aluminum strip.Screw it up to fasten the screen further. 2.warm white（Screen clip）dismountable shell.: Flip-up of 350W*140D with PVC wire brush & with socket Plate provision. WIRE MANAGEMENT : MS-POWDER COATED wire tray from 700W-1400W*350H with switch plate 300W*119D*69H .And Cable Routing (Hung Raceway)of 340H-360H considered the provision for DATA & Voice Sockets . Table Top :Table top is made of 25mm E0-grade Melaminae with ABS edge banding staright & chamfer(Thin edge shape) with Flip-up & Grommet Provisions. In between table top there are gap of 28MM thk to run the Aluminum track to settledown the screens with Holding brackets(CLIP) LEG:: Lipa :Slantlegs. Made out of with sand grain white meta with silver white aluminum alloy fitting. Powder coating to be 10 layered anti-rust process. Non-phosphorus powder coating. Coating thickness: 40-80UM Surface hardness: H-2H Impact resistance: 4N.M ANSI‐BIFMA certified Slant : 68° Inclined leg design，adopts metal and aluminum alloy material, breaking the inclination limit in physics Extrusion are made inclined shape which gives aesthetically appealing sleek look. CABLE RISER(JUNCTION BOX):: Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered. BEAMS ::Horizontal beams below table top will be with 30mm x 25mm rectangular tube CRCA Powder coated. MODESTY:: Below wire tray 8mm thk Melamine Modesty of 300H is considered. At Aslie side Melamine Modesty of 450mm ht Is considered. Metal modesty also possible based on the requirement,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
942
-
27092.63
Supply and installation of PEDASTALS DIX21.040047 -Size:408 X 470 X 641 Mobile Pedestal :2D+1Filling Unit Made out of 18MM thk melamine finish with round aluminum alloy handle,Structure: Five suspended universal wheels,Hardware:HAFELE three-slide rail ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
942
-
10123.1
Supply and installation of WORK STATION CHAIR ALIEN :Code:CAI60SW-Medium back chair with white frame,Back : Mesh back ,Seat fabric elastic foam, with seat shell, STG with 4-position locking PA caster. Backrest Strenght Test- Static (Proof Load)/ There shall be no sudden and major change in the structural integrity (loss of serviceability is acceptable) When a force of 1001N (225lbf) is applied 70 degree ± 10 degree to the back at 406mm (16in) above the seat for 1 minute. Drop Test- Dynamic (Proof Load) (Clause 7)/ There shall be no sudden and major change in the structural integrity (loss of serviceability is acceptable) When a 136kg (300lb) weight free falls from 152mm (6in). Swivel Test- Cyclic (Clause 8)/ There shall be no loss of serviceability after 120000 cycles of rotation with a 122kg (270lb) load on the seat (for the seat height is adjustable, test 60000 cycles in its highest position then 60000 cycles in its lowest position. Tilt Mechanism Test/ There shall be no loss of Serviceability after moving the mechanism between the front and back stops for 300000 cycles with a 109kg (240lb) load on the seat. Seating Durability Tests/ There shall be no loss of serviceability after loading two seat front corner with 890N (200lbf) for 20000 cycles respectively Rear Stability Test/ The chair shall not tip over when applying 13 disks on the seat against backrest support fixture Front Stability the chair shall not tip over when applying a horizontal outward for of 20N (4.5lbf) from the seat with a vertical load of 61 kg (135lbf) at a point 60mm (2.4in) from the front center edge of the load bearing surface of the seat Arm strength report : There shall be no sudden and major change in structural integity (Loss of serviceability is acceptable) when a force of 1125N (253lbf) is applied vertically to the armrest for 15s. Backrest durability:There shall be no loss of Serviceability when a force of 445N (100lbf) is applied 90 degree ± 10 degree to the back at 406mm (16in) above the seat for 120000 cycles with 109kg (240lbs) weighton the seat. castors:There shall be no loss of Serviceability after cycling a travel of (762±50)mm ((30±2) for 2000 cycles over a surface with obstacles and then 98000 cycles over a surface with obstacles with a 122kg (270lb) load on seat. The Castor should not seaparate under 22N (5lbs) pulling Force ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
942
-
13947.38
Supply and installation of BREAKOUT AREA SOFAS SU31.1.MR -740 x 710 x 740 x 440 -Single Sofa with Powder Coating Round Base,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
88
-
64957.1
Supply and installation of Centre Table T189.040042 Dia 400 x 420 /400 x 400 x 420(Square/circular) - Table with Wooden Table Top & Steel Base. Table top :18MM thk understructure with 12mm thk dia leg with Ms-powder coated finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
95
-
10685.49
Supply and installation of STORAGE DG63-2.166080 -Size:1669 x 400 x 808-Finish: Melamine Configuration: Rectangle shape tea cabinet with Translucent gray tempered glass in the middle of the door panel Structure: Melamine Base Top and bottom Panel 18mm thick Without any visible connectors Handle:All the handles in cabinet system is 120 or 160mm width.Side Panel 9mm Thin Z shape edge banding（White/Silver) Supporting Leg（Patent）：It is very convenient for people to adjust the height, just use a small wrench Sunon designer created this tool ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
20
-
97013.58
Supply and installation of CABIN TABLES DN87L-2.200163 -Size:2000 x 1630 x 750 TABLE TOP::Table top is made of 25mm E0-grade Melaminae with 2.5mm ABS edge banding staright & chamfer(10MM Thin edge shape) with Flip-up Provisions on storage unit. LEGS :: Lipa : Slant leg Made out of with sand grain white meta with silver white aluminum alloy fitting. Slant : 68° Inclined leg design，adopts metal and aluminum alloy material, breaking the inclination limit in physics Extrusion are made inclined shape which gives aesthetically appealing sleek look . BEAMS ::Horizontal beams below table top will be with 30mm x 25mm rectangular tube CRCA Powder coated. STORAGE:Providing and fixing of Storage unit in melamine finish with 18mm thk Prelaminated Top & 18mm thick Prelaminate Sides and Shutters with Edge band - with Aluminum Handles & Centre Locking. Options: Storage unit with shutter with openable & sliding & dummy area in storage at Undernith of the table,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
11
-
74517.81
Supply and installation of BACK STORAGE DNDCGR-2.150040 - Size:1500 x 400 x 1217 -STORAGE:Providing and fixing of Storage unit in melamine finish with 18mm thk Prelaminated Top & 18mm thick Prelaminate Sides and Shutters with Edge band - with Aluminum Handles & Centre Locking. Options: Storage unit with shutter with openable & sliding & dummy area in storage at Undernith of the table,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
11
-
45553.93
Supply and installation of CABIN CHAIRS AVEZA-CAZ82SW -Headrest: grayish white adjustable headrest;Back: grayish white back frame (Swing Function); Armrest: rayish white adjustable armrest(2D up and down/armrest rotation);Mechanism: STG with 4 position locking,base,grayish white nylon five-star base with grayish white PU castors .Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated.Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) BIFMA ,GREEGUARD Certified, Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
12
-
32338.24
Supply and installation of CABIN VISITORS AVEZA-CAZ62SW -680 x 610 x 980 -Back: grayish white back frame (Swing Function); Armrest: grayish white adjustable armrest(2D up and down/armrest rotation); Mechanism: STG with 4 position locking; Base: grayish white nylon five-star base with grayish white PU castors. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body.
Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
40
-
27557.32
Supply and installation of CONFERENCE TABLE DN72-2.280140- Size:2800 x 1400 x 750 TABLE TOP::Table top is made of 25mm E0-grade Melaminae with ABS edge banding staright & chamfer(Thin edge shape) with Flip-up Provisions. LEGS :: Lipa : Slant leg Made out of with sand grain white meta with silver white aluminum alloy fitting ,Slant : 68° Inclined leg design，adopts metal and aluminum alloy material, breaking the inclination limit in physics Extrusion are made inclined shape which gives aesthetically appealing sleek look. Pie Leg 40*40MM MS Powder coated leg . WIRE MANAGEMENT:: Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered. CABLE RISER(JUNCTION BOX):: Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
67065.8
Supply and installation of CONFERENCE TABLE DN72-2.320140- Size:3200 x 1400 x 750 TOP::Table top is made of 25mm E0-grade Melaminae with ABS edge banding staright & chamfer(Thin edge shape) with Flip-up Provisions. LEGS :: Lipa : Slant leg Made out of with sand grain white meta with silver white aluminum alloy fitting.Slant : 68° Inclined leg design，adopts metal and aluminum alloy material, breaking the inclinatio n limit in physics Extrusion are made inclined shape which gives aesthetically appealing sleek look. Pie Leg 40*40MM MS Powder coated leg . WIRE MANAGEMENT:: Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered. CABLE RISER(JUNCTION BOX):: Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
93357.45
Supply and installation of HEAD CHAIRS IN CONFERENCE AVEZA-CAZ82SW - Headrest: grayish white adjustable headrest; Back: grayish white back frame (Swing Function);Armrest: grayish white adjustable armrest(2D up and down/armrest rotation); Mechanism: STG with 4 position locking; Base: grayish white nylon five-star base with grayish white PU castors .Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra.
This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) , Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
32338.24
Supply and installation of Bar Counter Table DIX71.180080 -Size::1800 x 800 x 1050(6Nos) -Table top 25mm E0 grade melamine with 2.5mm ABS edge banding,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
309175.95
Supply and installation of CEO CABIN TABLE ED88L.320225 -Size:3200 x 2250 x 760 -Finish: Veneer+Formaldehyde Degradative Paint Configuration: L-shape excutive table with side cabinet in left Structure: Wooden base Wiring: Multi-Functional Socket in table top, (includes 2 power, 1 Internet -CAT.6, 1 telephone, 1 VGA, 1 Flux Line ) USB Charger under top; Hardwares: Hettich brand Slide Rail, soft closing drawer
Austrian Blum brand Damping Hinge Accessories: Walnut Wooden Pencil Case;
Meteor Gray Steel Decorating Handle. Table Top Features:Computer controlled, precise and efficient /One piece of wood veneer, clearer pores and smooth texture. Wood veneer as thick as 45s-60s with obvious concave-convex feeling and sense of solid wood. Applying formaldehyde-free white glue, green, adhesive, odorless and functionally stable. Features:Bevel-edged leather panel drew inspiration from Chinese traditional treasure bowl. Being small outside and big inside implies that money can be collected. Wood Veneer 3D Absorption Technique The tabletopadopts 3D absorption techniqueto realize an enveloping bent plane with clear pores and more smooth grain. Supreme texture: Neutral-colored wood grain, meteor gray paint and dull leather - charge box concealed under the sliding wood tray, demonstrating supreme quality.Completed the ANSI / BIFMA X5.5-2014 test :Desk centralized functional load testing/ Desk decentralized functional test . Completes GB / T 10357.1-2013 test /Main desktop vertical static load test/Table leg dropping test/Desktop vertical impact test /Desktop vertical static load test /(Customers require a uniform distribution of desktop loading 200kg) Purification Function: 81.3% Put four 500*500*5MM panels coated with the paint to a 1.5 cubic meter space and inject 0.5mg formaldehyde into it. After 48 hours, test showed that about 0.4mh formaldehyde is degraded with the purification ratio up to 81.3%. Durability of the purification effect: 68.8% Put four 500*500*5MM panels coated with the paint to a 1.5 cubic meter space and inject 0.5mg formaldehyde into it everyday for four days. On the fifth day, take it outside for one day then put it back inside a 1.5 cubic meter space and inject 0.5mg formaldehyde to check the purification performance. After 48 hours, about 0.34mh formaldehyde is degraded with the purification ratio up to 68.8% ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
1293788.54
Supply and installation of CEO CABINET ED97.320056 -Size:3200 x 560 x 2130 -Finish: Veneer+ Formaldehyde Degradative Paint Configuration: File Cabinet with Swing Doors, Sliding doors and open shelves; Structure: Wooden base Hardware: Austrian 'Blum 'brand Thickened Damping Hinge with Rebounder in bottom doors; German 'Hettich' brand Sliding Suite for upper doors.,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
1009217.05
Supply and installation of CEO CABIN MEETING TABLE ED78.280120 -Size:2800 x 1200 x 760 -Finish: Veneer+Formaldehyde Degradative Paint Configuration: Octagon meeting table Structure: Wooden base Wiring:Multi-Functional Socket (includes 2 power, 1 Internet-CAT.6, 1 telephone , 1 VGA, 1 Flux Line ) Magnetic Steel Cable Tray under table Accessories: Walnut Wooden Pencil Case. Table Top Features:Computer controlled, precise and efficient /One piece of wood veneer, clearer pores and smooth texture. Wood veneer as thick as 45s-60s with obvious concave-convex feeling and sense of solid wood. Applying formaldehyde-free white glue, green, adhesive, odorless and functionally stable. Features:Bevel-edged leather panel drew inspiration from Chinese traditional treasure bowl. Being small outside and big inside implies that money can be collected. Wood Veneer 3D Absorption Technique The tabletopadopts 3D absorption techniqueto realize an enveloping bent plane with clear pores and more smooth grain. Supreme texture: Neutral-colored wood grain, meteor gray paint and dull leather - charge box concealed under the sliding wood tray, demonstrating supreme quality. ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
528932.36
Supply and installation of CEO CABIN DISCUSSION Chairs SU30.1.MR-780x810x860x470 -Single Sofa with Powder Coating Steel Base,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
4
-
69202.9
Supply and installation of Coffee TABLE T190.060035 -Size:Dia 600 X 350- Table with Wooden Table Top & Steel Base. Table top :18MM thk understructure with 12mm thk dia leg with Ms-powder coated finish,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
16871.83
Supply and installation of CEO CHAIR HIP-CHP81SW- Size:700 X 605 X 1160 -PA black headrest + PA black back frame + black PU height-adjustable armrest + PU lumbar support + aluminum alloy polished five-star base + DONATI drive-by-wire mechanism (could be locked to 4 positions) + depth-adjustable seat + hollow PU castor. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled), Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
84359.14
Supply and installation of CEO VISITOR CHAIR CHP61SW-Size:700 X 605 X 1020 -PA black back frame + black PU height-adjustable armrest + PU lumbar support + aluminum alloy polished five-star base + DONATI drive-by-wire mechanism (could be locked to 4 positions) + depth-adjustable seat + hollow PU castor. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled), Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
8
-
78454.57
Supply and installation of CEO MEETING CHAIRS CHP61SW-Size:700 X 60 5X 1020 -PA black back frame + black PU height-adjustable armrest + PU lumbar support + aluminum alloy polished five-star base + DONATI drive-by-wire mechanism (could be locked to 4 positions) + depth-adjustable seat + hollow PU castor. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled), Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
6
-
78454.57
Supply and installation of 15 SEATER CONFERENCE ET78.6000 -Size:6000 X 2000 X 760 -Finish: Veneer+lacquer painting Configuration:Board meeting table with elegant 45 degree joint brige design. Structure: Wooden veneer Wiring:Hidden cable management, Including two wirebox in two corner boards (2 power, 1 VGA, 2 internet). Technology: Distinct bevel and span design with invisible screw connections. The large span without collapse is a demonstration of architecture science. The 45° bevel edge splicing technology sets a higher threshold for copying. All of these display Sunon’s exquisite technology and the quest for meticulous details, all for creating a noble, finely crafted, superior and comfortable office space.,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
1401486.47
Supply and installation of CONFERENCE CHAIRS AVEZA-CAZ61SW-680 X 610 X 980 -Back: black back frame (Swing Function); Armrest: black adjustable armrest(2D up and down/armrest rotation); Mechanism: STG with 4 position locking; Base: black nylon five-star base with black PU castors. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves.
Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) B, Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
38
-
29526.27
Supply and installation of HEAD CHAIRS IN CONFERENCE AVEZA-CAZ81SW -Size:680 X 610 X 1140 -Headrest: black adjustable headrest; Back: black back frame (Swing Function); Armrest: black adjustable armrest(2D up and down/armrest rotation); Mechanism: STG with 4 position locking; Base: black nylon five-star base with black PU castors . Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled), Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
4
-
31775.84
Supply and installation of 8 SEATER CONFERENCE DN71-2.240120-Size:2400 X 1200 X 750 -Finish: Melamine Configuration: Rectangle shape negotiation table with beveling edge structure: white powder coating finished Wiring: with flip up wire box. ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
4
-
66362.52
Supply and installation of CONFERENCE CHAIR CWG64SW -size:630 X 600 X 965 -Finish: Greyish white PA frame with greyish white nylon support Arms: Adjustable PU Armrest Back & Seat: Mesh back and mesh elastic foam seat Mechanism: Synchronized tilting mechanism Cylinder: High quality gas-lift Base: Greyish white nylon Five-Star base with PA castors. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) , Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
106
-
29806.9
Supply and installation of HEAD CHAIRS IN CONFERENCE WINGER -CWG82SW-Size: 630X600X1180 -Finish: Greyish white PA frame with greyish white nylon support Arms: Adjustable PU Armrest Back & Seat: Mesh back and mesh elastic foam seat Headrest: Greyish white PA adjustable headrest Mechanism: STG automatically tension control system with Four-Position locking Lumbar Support: Adjustable PP Lumbar Support Cylinder: High quality gas-lift Base: Greyish white nylon Five-Star base with PA castors. Features: The waist holder designed like Swan Wings. The Wing Shape waist holder fully fits the Lumbovertebral curves. Key support points effectively alleviate the pressure on the cervical and Lumbar vertebra. This chair adopts the design of ergonomics and its multifunctional waist holder & adjustable head pillow can be flexibly regulated. Ensure Flexible and comfortable sitting posture & completely relaxed body. Chair Height Adjustment Medium Back Synchronized Mechanism with multiple Locking Tilt Range :20 degrees / Armwidth: Armpad can give in PU & PP ,Adjusts up & down,width range Pivot 20 degrees inward and outward / PostureFit™ (sacral support/lower back) Leaning angle adjustment /Environmental (93% recyclable & 46% recycled) , Base / frame finish :Nylon Gas Lift :Korea imported Gas Lift ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
4
-
35150.21
Supply and installation of 32 SEATER BOARD ROOM D-EU71-Size:5500 X 2000 X 750 - Finish: Veneer+lacquer painting Configuration: U Shape Meeting Table Structure: Wooden base Wiring: EFJ33 Multi-functional cable box to add the wiring systerm to this table together with EFJ34 wire tube, The hole position see below illustration. Features: E0 level MDF Board, ，formaldehyde emission≤5mg/100g，filled with cellular board material. 2 shades ；W-23B Oak ；W-24B Walnut Coating:Waterborne Open-pore Coating（ Open-pore wood grain）International standard of VOC content in waterborne paint ≤300g/L. Waterborne Paint We Use is as low as 161g/L Much lower than the International Standard for Oil Paint 670g/L. All the wood-grain panels except desktop panels are thickened to 0.8mm, the edges and angles are more mellow and comfortable. ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
1
-
520214.68
Supply and installation of LOCKERS DG97-2.079195 -Size:796 X 400 X 1956 -Finish: Melamine Configuration: Rectangle shape high cabinet, Standard mechanical code lock, The middle row is wood grain color Structure: Melamine Base Hardware: FGV Damping Hinges. Top and bottom Panel 18mm thick Without any visible connectors Handle:All the handles in cabinet system is 120 or 160mm width.Side Panel 9mm Thin Z shape edge banding（White/Silver) Supporting Leg（Paten)：It is very convenient for people to adjust the height, just use a small wrench created this tool ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
52
-
58770.77
Supply and installation of LEASURE AREA CCS14BW -Size:345 X345 X 510 -Seat: fabric base; Seat: PP seat shell with coral PA body parts; Cylinder: SAMHONGSA cylinder; Base: wear-resistant rubber base,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
24
-
20527.96
Supply and installation of COLLABRATIVE MEETING TABLE DZZ72.175060 -Size:1500 X 1200 X 605-1255 -Leg Configuration: 3 sections frame -Desk height range : 605mm-1255mm, Maximum load:120kg, Speed:38mm/s, Noise _50Db, Voltage :100~240v, Aotomatically stop when an obstacle in detected.Includes sedentary reminder module. Table Top Finish: Melamine Configuration: With modesty panel,with a standard AC Plug(According to different countries) Sockets and Wire tube are not included ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
12
-
423482.87
Supply and installation of 4 PAKS DISCUSSION D-DN73 -Size:Dia 1200 X 750-CONFIGURATION : Circular - 3 legs TABLE TOP:Table top is made of 25mm E0-grade Melaminae with ABS edge banding staright LEGS : Lipa : Slant leg Made out of with sand grain white meta with silver white aluminum alloy fitting. Slant : 68° Inclined leg design，adopts metal and aluminum alloy material, breaking the inclination limit in physics Extrusion are made inclined shape which gives aesthetically appealing sleek look CABLE RISER(JUNCTION BOX): Ms-Powder coated junction box for sharing & Non sharing WS as Height 560H-690H & depth 40D & 279D for passing the wires is considered ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
2
-
30844.2
Supply and installation of 4 PAKS INFORMAL SEATING S322.2.MR -Size:1500 x 780 x 745 x 430 -Two-seat Sofa with fabric Finish.FABRIC :Here is the fabric type we use for Lounge & Sofa *Thick fabirc texture, 220±15gram/sqm * Thin fabric texture, 220±15gram/sqm Weight :340 Grams per liner metre * Resistance fabric with Dupont special layer. Anti-warter and dust. *Abrasion : In excess of 60000 cycles Matinadale Abrasion tester at 12KPA presuer. *Flammability : BS En 1021-1: 1994(Cigrarette) BS 7176 : 1995 Low Hazard Flammability performanceis dependent on the combination of material used. METAL :Here are the steel parts/legs used for loose furniture
1. Q195(Yield Strength =195MPA) stainless steel Φ22 1.5mm thickness
2. Q195(Yield Strength =195MPA) stainless steel Φ13 1.7mm thickness
3. Q195(Yield Strength =195MPA) stainless steel Φ13 1.8mm thickness
4. Steel leg with chrome finished. FOAM:*Trim foam and injection foam used *Trim foam 560 ployether, TDI methylbenzene. Density:27.6±5%kg/m³, 30kg/m³, 34kg/m³. *Injection foam: Density: 50kg/m³, 60kg/m³ *Durability: The foam has to hold up through use without losing its original properties. *Flame Retardant additives, used to improve a foam’s resistance to ignition or burning. (Unfortunately, these tend to have a negative influence on the comfort, support, and durability of the foam.)Mesh frame:D18mm Hollow steel tube Fabric Details :1. Fabric woven fabric 100% polyster , 2. Color fastness to washing : ISO 105 C10: 2006 : machine wash at 40*C with 5G/l sopa solution an dwith 10 steel balls 3.Color fastnes to rubbing : ISO 105-x12:2001 sizeof rubbing finger : 16mm diameter 4. Tensile strength : ISO 13934-2: 2014: CRE-25mm grab 5.Tearing stregth : ISO 13937-1:2000cor 1:2004: elmendorf tear 6.Seam slippage : ISO 13936-2:2004/ Seal slippage at 180N 7. Pilling resistance : Iso 12945-2:2000: martindale abrasion & Pilling tester , total load applied 415g ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/Equivalent)
4
-
103480.54
Supply and installation of CENTRE TABLE T194.120060 -Size:1200 x 600 x 280 - Table with Wooden Table Top & Steel Base ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
2
-
26714.29
Supply and installation of PARTITION ACOUSTIC STANDING SHL48.2.MR- Size:1300x250x 1410 (4Nos)-Free standing screen ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
22
-
223832.91
Supply and installation of INFORMAL SEATING SHL30.1U.MR -Size:650 x 650 x 720 -Single seat sofa with USB. FABRIC :Here is the fabric type we use for Lounge & Sofa*Thick fabirc texture, 220±15gram/sqm * Thin fabric texture, 220±15gram/sqm Weight :340 Grams per liner metre * Resistance fabric with Dupont special layer. Anti-warter and dust. *Abrasion : In excess of 60000 cycles Matinadale Abrasion tester at 12KPA presuer. *Flammability : BS En 1021-1: 1994(Cigrarette) BS 7176 : 1995 Low Hazard Flammability performanceis dependent on the combination of material used. METAL :Here are the steel parts/legs used for loose furniture
1. Q195 (Yield Strength =195MPA)stainless steel Φ22 1.5mm thickness
2. Q195 (Yield Strength =195MPA)stainless steel Φ13 1.7mm thickness
3. Q195(Yield Strength =195MPA) stainless steel Φ13 1.8mm thickness
4. Steel leg with chrome finished. FOAM:*Trim foam and injection foam used *Trim foam 560 ployether, TDI methylbenzene. Density:27.6±5%kg/m³, 30kg/m³, 34kg/m³. *Injection foam: Density: 50kg/m³, 60kg/m³ .*Durability: The foam has to hold up through use without losing its original properties. *Flame Retardant additives, used to improve a foam’s resistance to ignition or burning. (Unfortunately, these tend to have a negative influence on the comfort, support, and durability of the foam.) ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
32
-
74236.04
Supply and installation of BAR COUNTER TABLE DIX71.180080 -Size::1800 x 800 x 1050 (2Nos) -Table top 25mm E0 grade melamine with 2.5mm ABS edge banding ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
3
-
103059.03
Supply and installation of CAFETERIA TABLE D-DB78 -Size:1200 x 900 x 743(2Nos)-CONFIGURATION : rectabgle TABLE TOP:Table top is made of 25mm E0-grade Melaminae with 2.5mm ABS edge banding straight LEGS : LEGS : balance 36dia tube leg with frame with necessary hardware ,the agency should provide Manufacturers warranty and BIFMA Certificate etc,as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.(Make:SUNON/ Equivalent)
3
-
53427.45
Kitchen & Pantry
-
-
-
Supply and installation of over all size 500x500mm KNEE OPERATED HAND WASH UNIT Wall mounted SS sink with soap dispenser and towel rack. Top construction of SWG 16 sheet. Front and both sides turned up 12 mm and turned down 40 mm and in 12 mm. Rear turned up 150 mm, returned 25 mm and down 12 mm. 350 mm x 350 mm x 200 mm deep sink bowl of SWG 16. 38 mm dia waste pipe. Single spot deck mounted water faucet. SS 16 SWG wall brackets secured to top with acron SS nuts and bolts. Paper towel dispenser / soap dispenser and chef;s cap stand,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
32039.43
Supply and installation of FLUSHING HOSE UNIT - INDUSTRIAL Open Epoxy coated Hose Reels. EB-0107 Blue Spray Valve (4.0+ gpm). 35' flexible Hose of 3/8" I.D,as per approved by Engineer in charge, including all incidental and operational charges,Tansportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .T&S Brass & Bronze Works or any approved equivalant approved by Engineer in Charge.
2
-
47718.3
Supply and installation of size of 1000x700x850+150mm ss 304 with 16swg, SS WORK TABLE WITH UNDERSHELVES Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Top sheet to be sound deadend. One. 18 SWG (304) SS bottom shelf, starting at 150 mm height and the next shelf at equidistance. Refer drawing for raised splash back. Four numbers SS tubular legs with adjustable bullet feet,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
10
-
26131.45
Supply and installation of size of 1000x700x850+150mm ss 304 with 16swg, SS WORK TABLE WITH UNDERSHELVES Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Top sheet to be sound deadend. One. 18 SWG (304) SS bottom shelf, starting at 150 mm height and the next shelf at equidistance. Refer drawing for raised splash back. Four numbers SS tubular legs with adjustable bullet feet,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6
-
22495.77
Supply and installation of 1500x600x850+150mm ss304grade with 16swg, SS WORK TABLE WITH SINK *Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Sink size 450X450X350 deep integral with top sheet - check the drawing for position of the Sink. In the center 50 mm dia BSP drain coupling, hot and cold water faucet, deck mounted. Splash back 150 mm on rear / side.(AS PER LAYOUT DRAWING). 18 SWG (304) SS bottom shelf starting at 150 mm. Four numbers SS tubular legs with adjustable bullet feet.as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
28744.6
Supply and installation of size 1500x700x800+150mm made with ss304 grde of 16swg , WEIGHING TABLE / DRAWER AND ONE UNDERSHELF Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 35X35X3 mm SS angle welded framework. Top sheet to be sound deadend. One. 18 SWG (304) SS bottom shelf, starting at 150 mm height and the next shelf at equidistance. Refer drawing for raised splash back. Unit to be provided with One (01) tool drawer at right side. Tool drawer with integral handle . To house one removable SS GN 1/1 x 100 mm deep pan. Pan to be provided. Drawer with locking arrangement. Four numbers SS tubular legs with adjustable bullet feet. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
26245.07
Supply and installation of ELECTRONIC TABLE TOP WEIGHING SCALE Capacity 0f 20 kgs. Unit should have SS Tray a digital instrument panel connected on a vertical stand with a backlit display (Minimum calibration 10 grams). It should be provided with a 5 amp. power cord of minimum 1½ meter length having a battery backup.Brands - ISI specified brand / approved by weights and Measures department.as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Excon, Tula, Eagel or any approved brand by Engineer In Charge
2
-
11077.46
Supply and installation of ELECTRONIC WEIGHING SCALE Capacity 0f 300 kgs. Unit should have SS Platform of size 750 x 750 mm with a digital instrument panel connected on a vertical stand with a backlit display (Minimum calibration 50 grams). It should be provided with a 5 amp. power cord of minimum 1½ meter length having a battery backup. Brands - ISI specified brand / approved by weights and Measures departmentas per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Tula, Eagel or any approved brand by Engineer In Charge
1
-
19882.63
Supply and installation of AIR CURTAIN with 1500mm long , Centrally mounted heavy duty motor high velocity and CFM industrial air curtain. Suggested company - Euronics / Acme or any equivalent brand approved by engineer in charge ,Environment control systems or Almonard. Door opening to be confirmed at site. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
36356.8
Supply and installation of INSECTOCUTORS with size of 445x142x140mm Company - Pest Control India - Model SPIDER OR EQUIVALENT FROM PESTOLOGY,s per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6
-
12497.65
Supply and installation ofsize 1050x600x900mm withss 304grde of 16 swg , PLATFORM TROLLEYS Unit to be constructed of SWG 16 (304) SS double beaded on all sides on 35X35X3 mm SS angle welded framework. SWG 16 (304) SS, 1 ½ inch dia pipe handle fixed to body with SWG 14 (304) SS angular support. Four numbers 150 mm dia all swivel heavy duty rubberized castors to take loads of 150 kgs. Two of the wheels to have locking arrangement. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
19996.24
Supply and installation of size 950x600x1975 with ss304 grade of 16swg, VEG CRATE TROLLEY Five (5) no. # 18 Ga. S.S. Shelves.All sides marine edges.38mm x 38mm x # 16 Ga. S. S. square pipe uprights oncastor.S.S. shelves welded to S.S. square pipe uprights at equalCentre & accommodate two no. Veg basket each shelves. Four (4) no. Heavy duty 150 mm dia Non marking rubberized castors two with brakes,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
29994.36
Supply and installation of size 1500x700x850+150mm made with SS 304 grade with 16 SWG ,2 TANK SINK TABLE Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 35X35X3 mm SS angle welded framework. 2 sink of size 450 x 450 x 300 deep integral with top sheet with 38mm dia drain coupling. Imported pressurized spray unit to be wall,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
52603.75
Supply and installation of size 1500x300mm ,ss 304 18 swg ,WALL MOUNTED SHELF Constructed of 18 SWG (304) SS sheet. Rear and both sides turned up 50 mm hemmed outside. Front turned down 38 mm & in 12 mm. 25 mm away from the wall. SS Shelves secured to bracket with acorn SS nuts & bollts,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6
-
3976.53
Supply and installation of size 1440x788x2000mm ,SPLIT DOOR VERTICAL REFRIGERATOR- 4 HALF DOOR DB78.08 -Size:750*750*743 - CONFIGURATION : rectabgle TABLE TOP:Table top is made of 25mm E0-grade Melaminae with 2.5mm ABS edge banding straight LEGS : balance 36dia tube leg with frame with necessary hardware,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . williams or any equivalant brand approved by Engineer In charge
2
-
130657.25
Supply and installation of with size 1050x750x850mm ,POTATO ONION BIN Unit of 35X35X3 mm SS angle with 18 G SS mesh constuction. SS bin cover with handle and a sliding door at the bottom front for the stored item to be taken out. Four numbers heavy duty castors of 150 mm dia with rubber wheels. Two of the wheels with locking arrangement, as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
23745.54
Supply and Installation of Deep Freezer of Size:1060x695x840mm ith High Ambient Safety Compliant Improved Energy Efficiency Quiet Compressor Lock And Key arrangement Low E coating on Glass, Gross Volume: 300 Liters, Energy Consumption: 2.3489 kWh/24 hrs, Freezing temperature: -17°C to -22°C No. of Basket: 2 Nos. Insulation: 60mm Polyurethane Ice Cream Loading:90 Kgs Complete with controls, digital thermometer, built in stablizer with time delay auto start. Compressor to be housed on one side, provided with 1 inch diameter waste outlet and removable SS perforated false bottom and side – out dip tray below waste outlet. All sides to be tilted towards waste outlet to remove excess water,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Make:Blue Star/ Voltas/ Western or equivalent
2
-
27835.68
Supply and installation of size 550x750x710mm HEAVY DUTY FOOD GRADE STORAGE BINS Cambro, Model No: IBS37, Capacity-140 litres, Sugar load capactiy -143 Kg, Flour load capacity - 102 Kg,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor)
8
-
21586.85
Supply and installation of size 1200x600x300 ss 304 with 16swg, DUNNAGE RACKS The unit should be made of SS Square pipe structure of size 30 x 30 mm x 16 swg SS 304 with adjustable bullet feet and supporting cross bars at every 150 mm space,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor)
6
-
22495.77
Supply and installation of size of 350x320x590mm ,VEG PROCESSOR WITH STARTER Automatic vegetable processor. To process 200- 250 kgs per hour with multiple selection of blades for different cuts. Six different blades to slice / dice / grate and shred to be supplied with the machine. Machine to have inbuilt safety mechanisms. Suggested Brand - Robot Coupe CL 50 Ultra / Halde OR Equivalent,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor)
1
-
210187.75
Supply and installation of size 910x600x1675mm TILTING WET GRINDER COSMOS - CMC 10 - Capacity 10 ltrs. Tilting model with complete SS construction including the lid and the casing. 3 PHASE / 5 HP,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor) ESS cosmos , ultra or any equivaland brand approved by Engineer In Charge
2
-
52262.9
Supply and installation of PULVERISER with capicity not less than 15kg, Cosmos, Body made of SWG 18, 35 X 35 X 3 mm SS angle framework. All food contact parts to be of SS 304. Verical upright pipes of 16 SWG with adjustable bullets. Top tray of 16 SWG 16"X 18"X 4"height with 1"slope on the front side. Electric motor of 5 HP. 415 V , 3 phase . Electric panel to consist of overload relay with start / stop switch. The machine should be suitable for Wet-Pulpy and Dry crushing. The Wet cum dry grinder should be able to grind Spices, green chilies, fresh ginger, garlic, fresh fruits, fruit pulp, vegetables. Appropriate starter to be provided with the equipment Cosmos , ultra or any equivalant brand as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor)
1
-
33516.43
Supply and installation of 750x750x600mm HIGH PRESSURE SINGLE BURNER RANGE SWG 18 (304) SS on both sides with air vents. SWG 16 (304) SS on top with front turned down and cut out to receive one gratings. 35X35X3 mm SS angular framework fully welded. One 400X400 heavy duty cast iron removable vessel rest. One T-35 burner (72000 BTU per hour) with pilot and controls. One, SWG 20 (304) SS spillage tray with SS strip handle. Manifold - ½ inch dia provided on both sides. Four (4) nos SS legs with adjustable nylon feet. No splash back. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (First Floor)
4
-
18178.4
Supply and installation of BULK FRYER of size :750x750x700 mm,Body to be constructed of SWG 18 (304) SS on both sides with air vents and front with control panel. 35X35X3 mm SS (202) angular framework fully welded. SWG 16 (304) SS on top with front turned down and cut out to receive 1 fryer bowl and a oil drip hole. Provide a receptacle for oil drip from top sheet. One nos. SS frier bowl. One T-50 burner (1,00,000 btu/hr). Manifold - ½ inch dia provided on both sides. SWG 20 (304) SS spillage tray with SS strip handle. 16 SWG , 38mm dia SS pipe legs with adjustable bullet feet as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
21586.85
Supply and installation of DOUGH KNEADER of size :550x830x1050 mm with Capacity - 15 Kg,,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
1
-
47150.23
Supply and installation of size :1238x710x940 mm WORK TOP WITH UNDERCOUNTER REFER Williams OR Equivalent WILLIAMS MODEL AWR1350 L2 - WITH SHUTTERS AND WITH SPLASH BACK / 300 ltr capacity / R134a Refrigerant / Ventlaated cooling with automatic defrosting / temperature range of -2 to 10 C / Monoblock cooling system / 60 mm thick puf insulation / Digital controller / air guided panel / magnetic gaskets / adjustable shelves and guides / rounded edge and corner / self closing door / adjustable bullet feet / (castors with brakes , as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
88619.7
Supply and installation of HEAVY DUTY PLASTIC DUST BINS ON CASTORS WITH LIDS NEELKAMAL OR SINTEX or Any Equivalant brand as approved - 150 LTRS as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
8
-
3408.45
Supply and installation of TAWA of size :1200x700x850 mm,16 SWG SS top with 150 mm high raised splash on rear, returned 25 mm & down 12 mm. Both sides of top rolled down 50 mm flush with body cladding. Front of worktop bull nosed. Worktop to over hang the base body by 50mm from front and 75mm at rear. SWG 18 (304) SS on all sides with air vents on both sides. On fully welded SS angle frame. Cooking top of 20 mm thick polished SS plate with 75 mm raised rear and side edges with grease collecting trough in front and grease collecting drawer. Two V-1050 burners (40,000 btu/hr) with one pilot and control valve. 16 SWG , 38mm dia SS pipe legs with adjustable nylon bullet, as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
128384.95
Supply and installation of size :720x788x2000 mm SPLIT DOOR VERTICAL REFRIGERATOR - 2 HALF DOOR Williams OR Equivalent as approved by engineer In charge WILLIAMS MODEL GN 600 TN / 600 ltr capacity / -2 to 10 temp range / refrigerant R 134a / ventilated cooling / automatic defrosting / 60 mm thick puf insulation / Digital controller / air guided panel / magnetic gaskets / adjustable shelves and guides / rounded edge and corner / self closing door / adjustable bullet feet, as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
87483.55
Supply and installation of POT RACK Unit of size :1200x600x1500 mm to be provided with three (3) shelves, starting at 150 mm and then at equidistant, The uprights should be made of 32 mm dia SWG 16 SS 304 pipe. The top sides of the uprights should be sealed and properly rounded. Shelves should be constructed with 25 mm dia SS pipe of 16 SWG (304) with internal grid of 19 mm dia SS pipe at 100 mm spacing. Four numbers, 38 mm SWG 16 (304) SS tubular legs with adjustable bullet feet, as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
4
-
23745.54
Supply and installation of LOW PLATFORM TABLE FOR POT WASH of size :1200x600x450 mm The unit should be made of SS Square pipe structure of size 30 x 30 mm x 16 swg SS 304 with adjustable bullet feet and supporting cross bars at every 100 mm space.,as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
14201.88
Supply and installation of SOILED DISH LANDING TABLE WITH CHUTE of size:1500x600x850 mm constructed of 16 SWG (304) SS top, double beaded on all sides and secured to welded SS angle frame. ½ inch raised marine edges. Waste chute - One no. 6 inch diameter with rubber edges on left (confirm with the drawing) hand side 175 mm from the side edges. 25 mm dia drain outlet on the left hand side corner connected to waste outlet with lever handle. Four numbers, SS tubular legs with adjustable bullet feet. Side and rear cross bracing support to give a clear front to move in waste bin under the table. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2
-
16474.18
Supply and installation of size 1800x600x850+150mmm Made with SS 304 grade with 16 SWG - 3 SINK UNIT WITH STERLISER Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 35X35X3 SS angle welded framework. Sink - Two (2) nos, Size 450X450X300 deep sink integral with top sheet on left side with 38mm dia drain coupling, hot and cold water faucet, deck mounted. Sterlising tank -One of size 450X450X350 deep, fitted with 38mm dia drain coupling and ball valve.Heating -U type thermostatically controlled heating element. 2 KW/ single phase. 150 mm splash back on the rear. Four number legs, with adjustable bullet feet.as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
52262.9
Supply and installation of PRE RINSE SHOWER UNIT 1100 Flex Hose with Overhead Spring & Spray Valve Assembly / Finger hook / 3/8” NPT X 18” Riser / Lever handles with color coded indexes and spring check eternal cartridges / Self-Closing Pre-Rinse Spray Valve with Rubber Bumper & 1.42 GPM Flow Control Spray Face / Splash Mounted. Make - T&S OR ELECTROLUX or Equivalant brand as per approved brand by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
20166.66
Supply and installation of Hood Type Dish washer Make: IFB/Winterhalter as approved any equivalant brand by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
370384.9
Supply and installation of Size 1050x600x850+150mm UNLOADING TABLE WITH UNDERSHELVES Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Top sheet to be sound deadend. One. 18 SWG (304) SS bottom shelf, starting at 150 mm height and the next shelf at equidistance. Refer drawing for raised splash back. Four numbers SS tubular legs with adjustable bullet feet,s per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
18860.09
Supply and installation of size1200x650+300x850 SS 304 grade BAINE MARIE SIDE TABLE Constructed of 16 6 Swg SWG (304) SS top, double beaded on all sides and secured to welded SS angle frame. SWG 18 (304) SS sheet covering on three sides. 18 SWG (304) SS bottom shelf starting at 150 mm and the next shelf at equidistant from the top. Four numbers SS legs with adjustable bullet feet. The tray rail should be made of 19 mm dia SS pipe with required support at equal intervals. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
31812.2
Supply and installation of szie of 1800x650+300x850+600mm) SS 304 Grde with 16 SwG BAINE MARIE-5X1/1 GN Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to welded SS angle frame, with cut out to fit in FOUR rectangular 1/1 and two 1/2 gastronom containers. Gastronom containers to be 200 mm deep with lids. The tank of the baine marie should be provided with an online connection with a ball valve of 15 mm dia and a drain valve of 15 mm dia. 10 mm thick acrylic clear sneeze guard on top of the food counter at 600 mm height, resting on 25mm dia SWG 16 (304) SS pipe upright and SS frame. SWG 18 (304) SS sheet covering on three sides. 18 SWG (304) SS bottom shelf starting at 150 mm. Thermostatically controlled 3KW heating element with rotary ON/OFF switch with light indicator on the side. Water sensor to be provided in the unit to prevent heating element getting damaged due to lack of water. The unit should have 2 mtr supply cord with industrial plug. Six numbers SS legs with adjustable bullet feet.The tray rail should be made of 19 mm dia SS pipe with required support at equal intervals. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
102253.5
Supply and installation of WATER COOLER Completely SS Body. 150 ltr capacity. Seam welded SS tank /Overload compressor protection / adjustable cold water thermostat / To be provided with suitable water filter equipment / MAKE BLUE STAR OR EQUIVALENT as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
54535.2
Supply and installation of SS WALL SHELVING size of 1500x300 mm Constructed of 18 SWG (304) SS sheet. Rear and both sides turned up 50 mm hemmed outside. Front turned down 38 mm & in 12 mm. 25 mm away from the wall. SS Shelves secured to bracket with acorn SS nuts & bollts. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
4
-
1477
Supply and installation of SS 304 with 16Swg UTILITY TROLLEY of size 950x600x1000mm Three (3) tray type shelves of SWG 16 (304) SS, to be reinforced with channels of SWG 16 (304) SS. All three shelves to be equidistant. 32 mm dia SWG 16 (304) SS pipes to extend on top as handle at 100 mm clear height from the top shelf. 100 mm dia all as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
2
-
17667.13
Supply and installation of size 480x320x275 mm of STEAM CLEANER KARCHER SG 4/4 - Universal steam cleaner for commercial application. 2-tank system with all standard accessories / Steam pressure - 4 bar. as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for installation, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Second Floor)
1
-
115887.3
Storm water Drain & Compound wall South Side
-
-
-
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc.including all taxes, Excluding GST ,seigniorage and Dewatering charges etc.,overheads & contractors profit etc., as directed by Engineer-in-charge for complete for finished item of work.as per SS 20B (ApSS 308) in Ordinary Soil-Manu Means-Upto 3M depth
998.39
-
257.65
Plain Cement Concrete (1:4:8) proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., including all operational and incidental charges, labour and lift charges on all materials and all labour charges , curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for complete for finished item of work. (APSS No. 402)
165
-
4514.1
Random Rubble Stone masonry in CM(1:6) propotion using hard granite stone from approved quarry including cost and conveyance of all materials like Cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Crushed Stone, CR Stone, Bond Stone to work site, using 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including all incidental and operational charges, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, etc., including all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work as directed by the Engineer-in-Charge
650
-
4318.8
Plain Cement Concrete of M20 proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) beds using 20mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including machine mixing all charges for mixing, laying concrete to the required level curing etc., including all operational and incidental charges, labour and lift charges on all materials and all labour charges , curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for complete for finished item of work. (APSS No. 402)
40
-
5704.9
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of all diametres using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. , but includingoverheads & contractors profit etc., complete for finished item of work for all floors .( APSS No.126)
5
-
69009.75
Providing Mild Steel, Structural Steel, I.e., Angles, Channels,Beams and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Angles, Channels,Beams and I sections, including cost of welding rods, power charges, including cost of fixing in position etc,inluding all taxes Excluding GST etc,including fixing in position for complete finished item of work as aper approved drawing as directed by Engineer-In -Charge.
17.5
-
132.19
Supply and placing of the Design Mix Concrete of M25 Grade corresponding to IS 456 using minimum 380 Kg per cum, using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher, including with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, coarse aggregate,, water etc., ., to site and Excluding GST, Excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Footing
30
-
10769.15
Supply and placing of the M-25 (MINIMUM CEMENT CONTENT 380 KG/CUM) Grade Design Mix Concrete corresponding to IS 456 using Batching Plant at 20 cum per hour,Transit mixer 4cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, coarse aggregate, water etc., to site and including Seigniorage charges, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete Excluding hire charges for centering & scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work.
-
-
-
200 mm thick RCC Wall
165
-
6287.94
Flush Pointing to RR/ CRS Masonry in CM (1:3) including cost and conveyance of all materials in site, excluding seigniorage charges, curing, labour charges ,Excluding GST etc. complete for finished item of work as per SS.
1225
-
110.09
Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit etc., complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
2000
-
184.78
Landscaping
-
-
-
Hard Scaping
-
-
-
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc.including all taxes, Excluding GST ,seigniorage and Dewatering charges etc.,overheads & contractors profit etc., as directed by Engineer-in-charge for complete for finished item of work.as per SS 20B (ApSS 308) in Ordinary Soil-Manu Means-Upto 3M depth
420
-
257.65
Plain Cement Concrete (1:4:8) proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., including all operational and incidental charges, labour and lift charges on all materials and all labour charges , curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for complete for finished item of work. (APSS No. 402)
500
-
4514.1
Random Rubble Stone masonry in CM(1:6) propotion using hard granite stone from approved quarry including cost and conveyance of all materials like Cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Crushed Stone, CR Stone, Bond Stone to work site, using 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including all incidental and operational charges, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, etc., including all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work as directed by the Engineer-in-Charge
190
-
4318.8
Brick Masonary with Fly ash brick Class 5 of size 290x225x140 mm in super structure of building walls with cement mortar (1:6) prop (Cement: 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm) using 290mm x 150mm x 140mm from approved source having minimum crushing strength of not less than 5 N/ sq .mm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, all taxes excluding GST and cost of excluding seigniorage charges on all materials, etc., complete for finished item of work as directed by the Engineer-In-Charge and as per SS 504.
-
-
-
Ground Floor
100
-
8021.6
Fifth Floor
95
-
9445.3
Plastering to walls with 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water etc., to site, including all operational, incidental charges on materials, including all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves etc., all taxes but excluding GST and Seigniorage charges ,as directed by Engineer-in-charge for complete finished itemm of work.
-
-
-
Ground Floor
250
-
554.6
Fifth Floor
200
-
801.3
Flooring with Polished black Kadapa slabs of 25 - 30 mm thickness thick set over base coat of 20 mm thick CM(1:8) over already laid CC Bed/Roof slab,including neat cement slurry of honey like consistency spread at the rate of 3.30 Kgs of cement per sqm and White cement jointing with Pigment of approced shade,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm and water and flooring stones etc., including cost and conveyance of all materials like cement, sand, water, stone, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying shahabad stone to level, curing all taxes, except GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work
-
-
-
Ground Floor
520
-
688.76
Fifth Floor
250
-
883.58
Supply &Fixing with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ premium colours in single piece with edges flat nosed set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Granite, white cement pigment with approved colour etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work (APSS No.701 & 707)
-
-
-
Fifth Floor
800
-
5171.85
Supply &Fixing with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black in single piece with edges flat nosed set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Granite, White Cement pigment with approved colour ., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work (APSS No.701 & 707)
-
-
-
Fifth Floor
420
-
4189.87
Supply &Fixing with 25-30 mm mm thick Sadharali Rough Finish Granite stone in single piece with edges flat nosed set over a base coat of CM (1:8) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, Granite, White Cement pigment with approved shade, to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work (APSS No.701 & 707)
-
-
-
Ground Floor
1850
-
2725.43
Construction of Granular sub base of 150mm thick by providing HBG/ HBT material confirming to Grading-III of MORT&H Table- 401,35% of 9.50mm to 4.75mm HBG metal, 12.5% of 4.75mm to 2.36mm HBG metal and 52.5% of 2.36mm and below HBG metal by providing close grade material, spreading in uniform layers with motor grader on prepared surface, or by approved means mixing by mix in place method with rotavator/ approved means at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density, including cost and conveyance of all materials to work site, including all incidental and operational charges, labour charges, all taxes but excluding GST and Seigniorage charges, etc. complete for finished item of work as per MORT&H (5th Revision) Technical specification clause no:401 as directed by the Engineer-in-charge.
750
-
1626.2
Supply and spreading of Gravel for preparation of Mounds with gravel brought from outside, preparation of troughing for maintaining required slope and gradient, for preparation of ridges and valley,breaking the earthern clods into smaller pieces,removal of rubbish, debris, dressing as per the the approved drawing, required watering as per the directions of the Engineer-in-Charge including cost and conveyance of all materials like gravel, water to work site, including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes excluding GST and Seigniorage Charges, etc., complete for finished item of work as directed by the Engineer-In-Charge.
20
-
413.96
Supply and spreading of filling sand (i.e Fine Aggregate ) brought from outside, preparation of troughing for maintaining required slope and gradient,removal of rubbish, debris, dressing as per the the approved drawing etc,including cost and conveyance of all materials like gravel, water to work site, including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes excluding GST and Seigniorage Charges, etc., complete for finished item of work as directed by the Engineer-In-Charge.
150
-
950.22
Providing Water Proofing,making the Surface Preparation/ Cleaning the existing Flooring, removing all demurrage existing upto concrete surface, Applying Bostic BOSOLASTIC/ FOSROC/MYK of approved brand by the Engineer-in-Charge Brush bond a polymer based two component waterproof coating in two coats, with proper galthas, alround Side upto a height of 0.30m wherever necessarily required, and the protecting coat Water Proofing plastering by using 20 mm thick in two coats with CM (1:3) and mixing High durable cementitious acrylic based waterproofing chemical, with including all incidental and operational charges, Transportation, labour charges, all overhead charges & contractor profit, all taxes except GST etc.,complete as directed by Engineer In Charge for finished item of work for all floors and at all levels etc., to site, finishing, scaffolding, lift charges, curing, all taxes but excluding GST, etc. complete for finished item of work as directed by Engineer-In-Charge etc., complete for finished item of work. (SS 903 & 904).
4450
-
766.6
Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawing , including cost and conveyance of all Mild steel Tubes & Pipes sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like MS Tubes & pipes, including cost of welding rods, power charges, Labour charges and Fabrications charges etc.,inluding all taxes Excluding GST etc,including fixing in position for complete finished item of work as aper approved drawing as directed by Engineer-In -Charge.
62039.9976
-
119.47
Providing,Supplying,Fabrication,Fixing in position/Erection of M.S Structural Steel plate of all thickness, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings , including cost and conveyance of all MS Plate and all wastages such as overlaps, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works, including cost of welding rods, power charges, Labour charges and Fabrications charges etc.,inluding all taxes Excluding GST etc,including fixing in position for complete finished item of work as aper approved drawing as directed by Engineer-In -Charge.
30
-
103957.73
Supply and placing of the M-25 (MINIMUM CEMENT CONTENT 380 KG/CUM) Grade Design Mix Concrete corresponding to IS 456 using Batching Plant at 20 cum per hour,Transit mixer 4cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, coarse aggregate, water etc., to site and including Seigniorage charges, including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete Excluding hire charges for centering & scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC SLABS, BEAMS
-
-
-
Slab 100 mm Thick
500
-
568.81
Flooring with plain Cement Concrete general purpose tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 of any shades over a base coat of CM(1:6) 20mm thick over the CC bed lalready laid ,including neat cement slurry @ 33kg/SqM and jointed with neat White cement to full depth mixed with pigment of matching shade,including cost and conveyance of all material, like cement,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water and Tiles etc.,including all incidental and operatopnal charges , all labour charges, curing,including all taxes Excluding GST and Seignorage charges, etc complete for finished item of work as directed by Engineer-in-Charge.
575
-
932.83
Plain Cement Concrete of M20 proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) beds using 20mm size (SS5) graded hard Granite metal from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including machine mixing all charges for mixing, laying concrete to the required level curing etc., including all operational and incidental charges, labour and lift charges on all materials and all labour charges , curing all taxes, Excluding GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for complete for finished item of work. (APSS No. 402)
25
-
5704.9
Supply,Providing & Laying of Drain Shell with Polypropylene with 30 mm thick , the material is unaffected by moulds and algae, soil borne chemicals and bitumen.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2500
-
429.46
Supply,Providing & Laying of Geo - Synthetic sheet with Polypropylene of 200 GSM , the material is unaffected by moulds and algae, soil borne chemicals and bitumen.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
2500
-
56.81
Flooring with Tandur Rough Stone slabs 25 - 40 mm thickness thick set over base coat of 20 mm thick CM(1:8) over already laid CC Bed/Roof slab,including neat cement slurry of honey like consistency spread at the rate of 3.30 Kgs of cement per sqm and jointed and pointing CM(1:3)with neat cement,50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm and water and flooring stones etc., including pointing with cement mortor(1:3) duly filling the jooints , including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, stone, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying Tandur Rough to level, curing all taxes, except GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work
-
-
-
Ground Floor
200
-
702.5
Flooring with Cobble stone of approved pattern and colour of size 100x100x100 thick set over the base of 50 mm thick Fine Aggregeate (River sand ) and jointed and pointing with the CM(1:3)with cement, River sand and water and flooring of cobble stone etc., including pointing with cement mortor(1:3) duly filling the joints , including cost and conveyance of all materials like cement, River sand , water, stone, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying cobble stone of approved pattern to level, curing all taxes, except GST & seigniorage charges on all material etc.,overheads & contractors profit etc., complete as directed by Engineer-in-charge for finished item of work
2600
-
1983
Supply and fixing of M20 Grade Pre-Cast cement concrete kerb stone of size 600 mm x 110 mm x 400 mm including cost and conveyance of all materials like cement, sand, Water, Kerb etc, to site, loading, unloading, kerb stone transportation charges, labour charges for fixing kerb stone true to alignment, mixing charges, jointing to full depth and width with CM (1:4) proportion, curing, including all incidental and operational charges, all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work.
650
-
509.52
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1- mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames apable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion elding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh hutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated ibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead hall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work..,including cost and conveyance of all materials, accessories, labour charges for ransportation, erection at site with templates for casement sizing as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contractor profit , all taxes excluding GST etc., complete as irected by Engineer In Charge for finished item of work for all floors and at all levels .
5.5
-
7600.84
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials,accessories, labour charges for transportation, erection at site complete for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
5.5
-
6472.65
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for ullion sections as per the need and 102 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC ystem shall be provided with 4 no’s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site omplete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & ontrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
15
-
9122.15
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three track - three glass shutters sliding duly manufactured using UPVC reinforced profiles of 108.0 mm x 49 mm x 2.25 mm for outer frames, 85 mm x 41 mm x 2.25 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with reinforced with 35mm x 10mm x 1.5mm thick with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm refabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and fixed with with uPVC glazing bead of 22.5mm x 18mm with “C” or “R” type inner and outer EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., er set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site omplete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & ontrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
5
-
9484.58
Supply and Installation of DPI Flux panel system, a complete assembly of co-extruded UV protected 12 mm thick multi-layered polycarbonate panels with angular walls incorporated into a complete system. Panels shall have 6 layers with layers in soothing colours. Panel width shall be 600-900mm. Panels shall be with grip-lock notch standing seam running lengthwise to accommodate the connectors to be attached with trapezoidal fastener, each trapezoidal fastener of SS 304 Grade and secured to supporting MS Structure with min 3 numbers of screws to ensure a pull-out load of min. 7000N (7KN) when tested as per ISO 6892:1998 and IS 1608:2005. Panels shall pass dart drop impact test as per IS 14443-97, shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. Panel shall be with additional End cap/Aluminium U / F Profile / Glazing Bar (mill finish) for ends as required. Panel shall be fixed over M S structural steel / MS purlin (paid separately) etc, colour and pattern as per approved by Engineer-ib-Charge ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . (Make: DPI/ Equivalent)
150
-
2953.99
Providing and applying Two coats of Duco paint of approved shade and colour , ,to give an even and uniform shade applied over a coat of primer and ready made putty,fully to give a smooth and even surface including throughly brushing the surface free from water /mortor dropping and other foreign matter and sand paper smooth where ever required heights approved make as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site omplete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & ontrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
250
-
1650.37
Irigation
-
-
-
Supply and Fixing of Unplasticised PVCs Pipes pressure rating 6 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice.
-
-
-
75 mm dia
550
-
247.23
63mm dia
250
-
214.28
50mm dia
425
-
181.33
40mm dia
1230
-
163.15
Supply and Fixing of Unplasticised PVCs Pipes pressure rating 10 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc. including cost and conveyance of materials, labour charges and all taxes etc., complete for finished item of work. Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice.
-
-
-
32 mm dia
10
-
164.29
25 mm dia
20
-
151.79
20 mm dia
20
-
142.7
Providing and laying of Reinforced Cement Concrete Hume Pipe of NP2 Class of the following dia Plain Ended Tongue and Groove Model Pipe for culverts including cost and Conveyance of Pipe, all taxes excluding GST, all labour charges for lowering, laying and jointing of Pipes in position with Cement Mortar CM (1:2) including lifting, aligning, lowering and hoisting etc., as per drawing and as per MORTH specification 2900, 2905 and 2906 (4th Revision) and as directed by the Engineer-in-charge for finished item of work.
-
-
-
150 mm dia
50
-
1176.42
Supplying and Fixing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
60
-
559.44
Chiselling the brick masonry wall and repair to original surface ,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
1300
-
49.31
Cutting holes in Brick masonry & repairs to original surface ,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
100
-
77.94
Cutting holes in RCC slab floor & repairs to original surface ,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
100
-
119.3
Supply, Fixing & Commissioning of flexible,kink resistant 16mm inline tubing ( XFD) with pressure compensating, self flushing mechanism , Flat emitter and resistance to UV damage, algae growth brown in colour, Longer lateral run lengh with flow rate 2.3lph to 3.4 lph, pressure rating 0.58 to 4.1 bar wall thickness 1.2mm etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
9120
-
45.81
Supply,Fixing & commissioning of 50 mm Large Capacity Y Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) , including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make:Rainbird/ Armas/Equivalent)
10
-
3690.22
Supply,Fixing & commissioning of 40mm dia self-closing flushing valves to be installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, to avoid the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make:Netafim/Equivalent)
10
-
254.5
Supply,Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade, Notched Sides,Corrosion -Resistant of Tie Down Stake TDS 6050, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
9120
-
31.81
Supply,Fixing & commissioning of Gromatetake off Connects XF Series Drip Line and Blank Tubing to PVC Mainlines at Low Pressures 17mm thick etc,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
825
-
19.09
Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit,Unique Barb Design to Reduce Insertion Force Non - Obtrusive Brown Colored Fittings of 17mm thick Barbix Barb Tee,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
820
-
25.45
Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit,Unique Barb Design to Reduce Insertion Force Non - Obtrusive Brown Colored Fittings of 17mm thick Barbix Barb Coupling ,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
515
-
22.9
Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit,Unique Barb Design to Reduce Insertion Force Non - Obtrusive Brown Colored Fittings of 17mm thick Barbix Barb Elbow,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
260
-
25.45
Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit, Unique Barb Design to Reduce Insertion Force,Non - Obtrusive Brown Colored Fittings of 17mm Barbix 1/2" , etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
20
-
38.17
Supply,Fixing & commissioning of 17mm thick End cap S Type for dripline closure at the end of the dripline etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
825
-
12.72
Sprinklers & Accessories
-
-
-
Supply,Fixing & commissioning of Pop up spray head 1804 Series Spray bodies, with Rotary nozzle having mutilple stream MPR spray having Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle capable of covering 4.0-7.30 m at 1.40 - 3.80 Bars pressure, and the enviroment. Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to 270 degree or full circle,True flushing mechanism, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic.Pop spray body shall with stand upto 4.8 bar.etc,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
104
-
827.12
Supply,Fixing & commissioning of 5004 Series Rotor pop up sprinkler full/part circle having radius of 6.7mts - 12mts @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 Ltr/sec. The sprinkler is gear driven rotary type with having 3/4" bottom inlet,Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and Reversing full- and part-circle adjustment 40° - 350° and also having tapered riser stem with Wiper Seal. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic. O-ring Slip Clutch,Racheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID Plugs,Flow Stop Available,Non-potable water indication available,etc,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
16
-
1654.23
Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly and tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/Sqm at 43 Degree Celcius and a surge pressure of 16.6 kg/Sqm,Flex pipe textured for wet conditions and the fittings shall be made of UV resistant thermo plastic etc,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
104
-
254.5
Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly and tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/Sqm at 43 Degree Celcius and a surge pressure of 16.6 kg/Sqm,Flex pipe textured for wet conditions and the fittings shall be made of UV resistant thermo plastic etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : Rainbird /Equivalent)
16
-
318.12
Supply,Fixing & commissioning of HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : SAB/ PIMTAS/ Equivalent)
120
-
203.6
Valves & Accessories
-
-
-
Supply,Fixing & commissioning of PVC Single Union Ball with Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical , ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10 etc.., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : AQVASTAR/ PIMTAS/ Equivalent)
12
-
1908.73
Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : AQVASTAR/ PIMTAS/ Equivalent)
4
-
1336.11
Supply,Fixing & commissioning of double acting air and vaccum releasePVC 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line and the working pressure shall be 5 bar for Drip Irrigation etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ Equivalent)
10
-
1017.99
Supply,Fixing & commissioning of double acting air and vaccum release PVC 2 " Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 KSC etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ Equivalent)
4
-
1526.99
Supply,Fixing & commissioning of 150 mm dia Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ PVB/ VB/ Equivalent)
21
-
572.62
Supply,Fixing & commissioning of 250 mm dia Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ PVB/ VB/ Equivalent)
10
-
1908.73
Supply,Fixing & commissioning of 300 mm thick Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ PVB/ VB/ Equivalent)
5
-
2799.47
Supply,Fixing & commissioning of 450 mm Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ PVB/ VB/ Equivalent)
10
-
5853.44
Supply,Fixing & commissioning of 3/4th Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc.,, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ 3RC/Equivalent)
7
-
4580.96
Supply,Fixing & commissioning of 3/4th Key threads into top of QCV to provide water access etc..,, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ 33DK/Equivalent)
2
-
3817.46
Supply,Fixing & commissioning of 3/4th Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAIN BIRD/ SH-0/Equivalent)
2
-
5089.95
Filtration Unit
-
-
-
Supply,Fixing & commissioning of 75 mm Disc Filter with capacity 30 cubic/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : ARMAS/AMIAD/Equivalent)
1
-
15269.86
Pumping Unit
-
-
-
Supply,Fixing & commissioning of Monobloc or openwell submercible pumpset of having discharge and head of design flow with pressure gauge, UPVC sch 80 - suction & delivery manifold and mounted on a baseframe with proper supports,pump of 4.5 Lps ,pressure head of 50 Mts etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : TEXMO/KIRLOSKAR/Equivalent)
1
-
69986.84
Supply,Fixing & commissioning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL starter ,start / stop push buttons , Ammeter , Single phase preventor , Voltmeter , Indicating lamps , MCB , Dry level guard sensor with control cable etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : L&T/MINILEC/AE/Equivalent)
1
-
22268.54
Supply,Fixing & commissioning of 2.5'' control Valve, Butterfly Valve in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : PIMTAS/AQVASTAR/Equivalent)
1
-
5726.2
Supply,Fixing & commissioning of 2.5'' Non Return Valve to prevent back flow have flap type or spring type with pressure rating of PN 10 etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : PIMTAS/AQVASTAR/Equivalent)
1
-
4453.71
Supply,Fixing & commissioning of Pressure release valve 2.5" with pressure setting from 0 to 7 Bar etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : PIMTAS/ARMAS/Equivalent)
1
-
19087.32
Automation Equipments
-
-
-
Supply,Fixing & commissioning of 14/1 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto -55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strenth 1400PSI for two way communication betwee nsolenoid valvel and decoders complete including suitable conduit pipe etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/PAIGE/Equivalent)
3700
-
89.07
Supply,Fixing & commissioning of ESP-ME 4-22 Station Controller UV resistant,wall mount case,with LCD display and WIFI Enabled ,non volatile memory for 100years,10KV surge protection with removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,wityh contract default programe ,slow closing valve removable battery with sensor terminals ESPseries, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
1
-
31812.2
Supply,Fixing & commissioning of ESP-ME Control SM6 Module etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
2
-
7634.93
Supply,Fixing & commissioning of 50 mm Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/PGA/Equivalent)
12
-
7634.93
Supply,Fixing & commissioning of 25 mm Solenoid globe angle inlet Valves with fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
4
-
3053.97
Supply,Fixing & commissioning of PRS-DIAL to Maintain constant outlet pressure between 1.04 to 6.9 KSC etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
16
-
4071.96
Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
77
-
190.87
Supply,Fixing & commissioning of SMRTY moisture sensing device ,to measure soil temp,EC ,Moisture level complete to convert as smart controller,with corrossion resistant sensor and setting thershhold moisture level etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
1
-
27994.74
Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20 mm UL CUL listed etc., including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : RAINBIRD/Equivalent)
1
-
6362.44
Supply,Fixing & commissioning of Pump relay 24 AC PLA relay ,stabilizer 300watts etc, including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.(Make : PSA/Equivalent)
1
-
8271.17
Soft scape
-
-
-
Shrubs & Interior Plants
-
-
-
Supply and Planting of WedeliaTrilobata/Alternanthera Green/ Alternanthera Red/ Alternanthera White/Galphimia/Pennisetum setaceum /Pseuderanthemum or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6100
-
10.98
Supply and Planting of Canna orange /Jatropha/ Pseuderanthemum laxiflorum/ Clerodendrum inerme/ Ixora dwarf pink/ Tecoma capensis/ Syngonium podophyllum / Lantana white/ Lantana yellow /Cuphea purple / Cuphea white /Cymbopogon/ Dianella/ Hymenocallis littoralis/ Ixora dwarf /Murraya exotica/ Crinum lily green/ Jacobaea maritima/ Tradescantia/ Stachytarpheta indica/ Euphorbia milii /Leucophyllum / Angelonia purple /Angelonia white /Pendanus dwarf Tabernaemontana /Furcraea /Citronella / Russelia equisetiformis /Impomoea black /Hymenocallis speciosa Asparagus / Chlorophytum comosum/ Heliconia rostrata/ Acalypha wilkesiana /Ohiopogon/ Ipomea batatas Catharanthus roseus or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
19600
-
26.13
Supply and Planting of Ixora singaporensis white red and pink /Hibiscus dwarf /Franciscea latifolia/Alpinia sanderae /Sansevieria dwarf/ Bambusoideae/ Euisetum/ Costus red/ Allamanda cathartica/ caladium mix or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6800
-
48.29
Supply and Planting of Spathiphyllum/ Alpinia zerumbet/Codiaeum variegatum/Zamioculcas/ Alocasia black stem Sansevieria trifasciata 2 types /Calathea leoni /Aglaonema/ Heliconia metallica/ Arundo donax/ Heliconia psittacorum/ Strelitzia reginae/ Alocasia or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
8450
-
76.69
Supply and Planting of Yucca green/Plumeria Pudica/ Asplenium nidus shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
630
-
284.04
Supply and Planting of Plumeria dwarf white shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
40
-
1022.54
Supply and Planting of Agave /Calathea lutea/Nymphaea Stellata/ Nuphar lutea/Nelumbo Nucifera/Nelumbo lutea or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
900
-
187.46
Supply and Planting of Anthurium/ Yucca white shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
120
-
511.27
Supply and Planting of Plumeria dwarf red shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
60
-
738.5
Supply and Planting of Rhapis excelsa shrubs of height not less than450 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
135
-
852.11
Supply and Planting of Cycas revoluta shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
45
-
1363.38
Supply and Planting of Aloe vera shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
120
-
397.65
Supply and Planting of Dracena fragrans shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
25
-
624.88
Supply and Planting of Tabebuia aurea/Jacaranda mimosifolia /Millingtonia hortensis/Kigelia pinnata/Terminalia bellerica/Butea monosperma of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
35
-
284.04
TREES
-
-
-
Supply and Planting of Spathodea campanulata/Terminalia catappa of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
10
-
204.51
Supply and Planting of Erythrina indica/Tabebuia avellanedae /Cassia renigera of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
15
-
397.65
Supply and Planting of Tabebuia rosea of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
6
-
170.42
Supply and Planting of Plumeria alba / Tamarindus indica of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
10
-
1249.77
Supply and Planting of Conocarpus of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
8
-
624.88
Supply and Planting of Tabebuia Aurea/ Jacaranda mimosifolia/ Millingtonia hortensis/ Kigelia pinnata/ Teminalia bellerica/ Butea monosperma of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
35
-
284.04
PALMS
-
-
-
Supply and Planting of Foxtail palm of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
5
-
852.11
Supply and Planting of Date palm/ Washingtonia Palm of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
10
-
17042.25
Supply and Planting of Royal palm/Roystonea regia of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
51
-
738.5
Supply and Planting of Phoenix palm of height not less than 3000 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
5
-
10225.35
URBAN FORESTRY
-
-
-
Supply and Planting of Caesalpinia pulcherrima/Carica papaya/Murraya koenigii /Azadirachta indica or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
480
-
28.4
Supply and Planting of Acacia nilotiea/ Albizia lebbeck/ Bauhinia racemosa/ Caesalpinia sappan/ Cassia surattensis/ Cassia fistula or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
1920
-
45.45
Supply and Planting of Acacia concinna / Acacia sinuata/Adenanthera pavonina/Putranjeeva roxiburghii/ Thespesia populnea or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
1260
-
62.49
Supply and Planting of Acacia catechu (big & small)/ Caryota urens/ Averrhoa carambola/Erythrina variegata/Cinnamomum verum/Filicium decipiens or Equivalent shrubs of height not less than 300 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
660
-
79.53
Supply and Planting of Terminalia bellirica/Simarouba blauca/ Santalum album of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
180
-
90.89
Supply and Planting of Gossypium hirsutum/ Salix tetrasperma of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
120
-
102.25
Supply and Planting of Cycas circinalis of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
60
-
1022.54
Supply and Planting of Dillenia indica/Michelia champaka/Phoenix dwarf of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
180
-
170.42
Supply and Planting of Plumeria alba of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
60
-
284.04
Supply and Planting of Plumeria rubra of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
60
-
204.51
Supply and Planting of Syzygium cumini of height not less than 600 mm planting as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
60
-
136.34
Supply,Fixing of 10mm thick Anchor fasteners, 10mm Threaded Rod, Universal Clamp, Channel, Threaded U Clamp, fixing below podium work ,including all incidental and operational charges, labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
160
-
469.2
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of all diametres using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. , but includingoverheads & contractors profit etc., complete for finished item of work for all floors .( APSS No.126)
6
-
69009.75
Supply and Laying of Carpet Grass Lawn of Korean/Bermuda or equivalent, planting excluding under bed as per approved drawing and as directed by Engineer in charge, including maintaining for three months period ,and client should provide water ,including all incidental and operational charges, Transportation, labour charges for planting, overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
1500
-
193.15
ELECTRICAL PART
-
-
-
Supplying and fixing of following sizes of medium class MS conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : NAI / Bharath / GB / BEC.
-
-
-
20mm 1.6mm Thick MS Conduit
100
-
166
25mm 1.6mm Thick MS Conduit
12000
-
194
32mm 1.6mm Thick MS Conduit
8400
-
259
Supply and fixing of following size medium grade, FRLS with IS:9537 part 3 regid PVC pipe, PVC Junction Boxes,Normal with dummy cover,, 1.5mm thick PVC Bend including labour charges fox fixing the pipe with all accessories etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Sudhakar/Modi/Million plast/Finolex/VIP
-
-
-
20mm dia 2mm thick PVC pipe
3000
-
59
25mm dia 2mm thick PVC pipe
1600
-
66
32mm dia 2mm thick PVC pipe
1000
-
86
POINT WIRING
-
-
-
Wiring with three runs of 1.5 Sqm FRLS PVC insulated flexbile copper conductor cable as Phase ,neutral and earthing in the existing MS conduct pipe with 6A modular type switch with PVC module front plate and including all labour charges etc., complete for light point, call bell point and exhaust fan points etc complete. Makes of Wire : Finolex / Havells/ Polycab(HR_FR-LF),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. . Make of Modular Switch & Socket:Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
-
-
-
1 LP Controlled 1 Switch
250
-
839
2 LP Controlled 1 Switch
160
-
942
3 LP Controlled 1 Switch
180
-
1045
4 LP Controlled 1 Switch
60
-
1148
5 LP Controlled 1 Switch
45
-
1251
6 LP Controlled 1 Switch
65
-
1354
7 LP Controlled 1 Switch
10
-
1457
8 LP Controlled 1 Switch
7
-
1560
9 LP Controlled 1 Switch
3
-
1663
10 LP Controlled 1 Switch
4
-
1766
11 LP Controlled 1 Switch
1
-
1869
12 LP Controlled 1 Switch
1
-
1972
WIRING
-
-
-
Supply and laying of 3 runs of 36/0.3mm (2.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
6500
-
103
Supply and laying of 3 CORE of 56/0.3mm (4.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
12500
-
147
Supply and erection for approved make 1No 2/3pin 6A modular universal socket with 6A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete for Raw Power Points.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
220
-
695
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR TELEPHONE CONNECTION mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
500
-
1349
Supply and erection for approved make 3Nos 16/6A 2 /3 Pin 2 Module Modular Universal Socket with 1 No.6A modular switch & RJ45 CONNECTOR FOR TELEPHONE mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
1000
-
2363
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Legrand / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare..
230
-
839
Supply and erection for approved make 3Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR DATA CONNECTION mounted on POPUP TYPE GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
30
-
7772
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR TELEPHONE CONNECTION mounted on POPUP TYPE GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
200
-
3704
Supplying and fixing 16 A, 230 V, DP Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
70
-
7002
Supply, erection, testing and commissioning of 8 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, single door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40A DP 30mA RCBO as incommer and 6 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
2
-
9217
Supply, erection, testing and commissioning of 8 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, single door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40A DP 30mA RCBO as incommer and 8 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
6
-
9694
Supply, erection, testing and commissioning of 4 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63A FP RCBO as incommer and 12 nos. 6-32A 10KA SP MCB as outgoings including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
14
-
13631
Supply, erection, testing and commissioning of 6 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63A FP RCBO as incommer and 18 nos. 6-32A 10KA SP MCB as outgoings including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
31
-
16585
Supply, erection, testing and commissioning of 8 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63-100A FP RCBO having sensitivity of 30mA and 24 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
12
-
18573
Supply, erection, testing and commissioning of 8 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole 125A MCCB,25kA as incommer and 8 Nos 40-63 A TPN MCBS as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree/Havells. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
2
-
33128
Supply and fixing of 100mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3500
-
514
Supply and fixing of 150mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1500
-
678
Supply and fixing of 300mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1250
-
1161
Supply and fixing of GI Junction box of size 178mm x 52mm of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
700
-
389
Supply & Fixing of 222mm x 52mm G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
350
-
485
Supply & Fixing of 372mm x 52mm G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
250
-
934
Supply,fixing and transportation of 22W, 2300 lumens, 1200mm length T5 LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: 2KV, THD10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc. complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya /Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
180
-
987
Supply,fixing and transportation 22 W LED LINEAR Architectural LIGHT CEILING MOUNT :‐ Body Material : Extruded Aluminium ‐6063 with powder‐ coating Diffuser : PMMA diffuser L1135mm,W‐60,h‐80mm Body Color : White, Silver, Black Fixed/ Adjustable : Fixed Light Source : SMD 2835 Beam Angle : 103.2˚ Color Temperature : 3000K, 4000K CRI : ≥80 Ingress Protection : IP20 Driver : Constant Current Input Voltage : 220‐240V /50‐60Hz Dimming Options : Triac, 0‐10V, DALI Mounting Arrangement: Surface mounted /suspended kit.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips/ Wipro /Crompton / Bajaj / Havells / Jaquar / HPL /Syska /Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
650
-
2918
Supply,fixing and transportation of 36 w Back lit, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range,Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro /Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
-
-
4293
Supply,fixing transportation of 18W LED Down Light Recessed / Surface mounting round/ square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1500
-
2304
Supply,fixing and transportation of 7 LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
50
-
1384
Supply,fixing and transportation of 36W LED DOWN LIGHT ROUND : 1.Module structure, adapted to different LED light source and beam angles. 2. Different colors and anti‐glare designs of reflectors for choice, realizing spot, flood or wallwasher lighting effect. 3. Patented structure design, die cast lamp body, simple but elegant. Approved Make: Delta,Simes,Flos, Qlite 4. UGR15 Secondary calculus lens tech, accurate light distribution , pure light spot, multi‐anti‐glare tech. 5. Various drivers for option, nonflicker, smart control, etc. 6. IP20, IP44 for option. 7. Serialized products with multiple dimensions, and powers ranging from 9 W to 40W. 8. Lifespan up to 50,000 hours,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Approved Make: Delta‐Grand Reo XL,Igguzini‐Reflex N107, Qlite‐ QL‐RMod‐C‐01‐FRDL
800
-
12007
Supply,fixing and transportation of 18 W DOWN LIGHT HANGING ROUND SHAPEDLUMINAIRE,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
150
-
4170
Supply,fixing and transportation of 15 W DOWN LIGHT HANGING ROUND SHAPED Customised As per Architectural Design and Aesthethic. E‐14 lamp holder.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Design to be approved by Architect. Approved Make‐ Flos, Vibia, Foscarrini,Qlite PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
40
-
3977
Supply,fixing and transportation of 15 W LED SQUARE HANGING DOWN LIGHT Customised As per Architectural Design and Aesthethic. E‐14 lamp holder.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Design to be approved by Architect. Approved Make‐ Flos, Vibia , Foscarrini,Qlite
350
-
13575
Supply,fixing and transportation of 15 LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
80
-
4168
Supply,fixing and transportation of 30W LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
25
-
4932
Supply,fixing and transportation of 18 W LED BOLLARD LIGHT:‐ HOUSING DIMMABLE SUPPORT on request. T=60‐80um Adhesion of ISO class 1/ASTM class 4B 12# Die‐casting powder coated aluminum. PMMA SMD3535 type LED Constant Voltage Input,Constant Current Output ‐20˚C ~40˚C H‐800mmXL‐110mm ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Approved Make: Bega99 856 K3+99 622, Igguzini‐iWayBW79 , Delta‐ BAZIL, Qlite MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya /LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
60
-
10871
OCCUPANCY SENSORS FOR LIGHTS :Supply,fixing and transportation of Occupency sensor of CRPS 10R010A of Wipro make or Equivallent makes ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
4016
Supply and Installation of 600mm x 75mm x 2 mm thick GI Ladder type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. complete including conveyance and labour charges for installation etc., complete for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
350
-
954
Supply and Installation of 300mm x 50mm x 2 mm thick GI Ladder type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. complete including conveyance and labour charges for installation etc., complete for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
360
-
596
Supply and Installation of 150mm x 50mm x 1.6 mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete including conveyance and labour charges for installation etc., complete for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
369
Supply and Installation of 300mm x 50mm x 1.6 mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete including coveyance and labouyr charges for installation etc., complete for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
682
Supply and laying of 2.5 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal/ Polycab / Havells / KEI.
100
-
133
Supply and laying of of 4 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I)including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells/ KEI.
320
-
168
Supply and laying of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal/ Polycab / Havells / KEI.
240
-
527
Supply and laying of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal /Polycab / Havells/ KEI.
600
-
892
Supply and laying of 25 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
150
-
1261
Supply and laying of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc.,complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
120
-
8045
Supply and laying of 240 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
100
-
10850
Supply and laying of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
50
-
241
Supply and laying of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
450
-
376
Supply and laying of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
30
-
483
Supply and laying of 150 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
30
-
869
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 4 core 2.5Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels.
12
-
314
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 4 core 4Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
24
-
314
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 4 core 10 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
24
-
314
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 4 core 16 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels.
134
-
414
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 4 core 25 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
4
-
414
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 3.5 core 185 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
16
-
2115
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel copper lugs and earth tag for gland suitable for 3.5 core 185 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
4
-
2906
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel aluminium lugs and earth tag for gland suitable for 4 core 16 to 25 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels.
10
-
346
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel aluminium lugs and earth tag for gland suitable for 3.5 core 50 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels.
14
-
505
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel aluminium lugs and earth tag for gland suitable for 3.5 core 70 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels
8
-
748
Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket and long barrel aluminium lugs and earth tag for gland suitable for 3.5 core 120 sqmm to 150 Sqmm XLPE insulated armoured cable etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI /Commet/ Dowels.
8
-
1082
Supply and laying of 25x3mm GI strips 0.3M above/below ground including cost of all supports, insulators, washers, nuts & bolts including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
240
-
67
Providing and fixing 8 gauge cu wire on surface or in recess for loop earthing as required including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
240
-
95
Supply and Fixing of Modular socket type Telephone jack with Connector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.Krone)
10
-
288
Supply and Fixing of approved make of plug - in type LAN RJ-45 socket outlet with G.I outlet box and cover plate complete as required in 3 module plate including cost and conveyance of all materials and labour charges commissioning of CAT 6 including testing and giving report to each point etc complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / Legrand AMP / Krone)
10
-
563
Supply and laying of Cat 6 LAN cable in the existing PVC/MS conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / AMP / Molex/Legrand)
150
-
25
Supply & installation of 24 port Network switch in existing rack will all necessory accessories as required including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : CISCO / Net Gear / HP / Dlink.
12
-
9169
Supply & installation of 6U wall mount Network rack with power spike including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-HCL/Vall
12
-
4889
Supply & installation of 24 Port Patch Panel including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-D link/AMP/Molex/Legrand/Krone
12
-
6707
Supply & fixing of 7 feet length moulded patch cord including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-D link/AMP/Molex/Legrand/Krone
12
-
239
Supply and Laying of 12 core Single mode armoured Indoor/outdoor OFC cable with all necessary fitting including labour charges for laying etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : D Link / AMP / Molex / Legrand / Krone.
100
-
114
FLOOR PANELS
-
-
-
Supply, installation, Testing and Commissioning of 3phase and Neutral 415V, 4 wire Free Standing, Floor mounted MV panel as mentioned below made out of 2mm thick CRCA sheet after seven tank process and Epoxy powder coating. The panel shall consist of suitable rating FP Aluminium busbar (at the rating of 0.8A per Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 36KA FOR INCOMER and consist of the switch gear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have at least two spare cubicles of the maximum outgoing MCCB rating. All MCCBs shall be provided with microprocessor based releases & with Neutral link. The fault level indicated in the Schedule are the minimum ratings All Switchgear shall have Rotary Handles. B329
-
-
-
PANEL TYPE -01 : Incoming :100A CHANGEOVER SWITCH -1NOS.100 FP Variable Type MCCB with Manual Closing Mechanism of 36 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars : 160A, 4P Aluminium Busbar Chamber for the entire length of the Panel, Outgoings: 63Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -6 NOS., 40Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -2 NOS.. Metering : i) Digital Load Manager with RS 485 port, ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets, .iii) CTs800A/5A 15VA burden Class 1.0 Accuracy with 0-800A Digital Ammeter with inbuilt selector switch - 1sets.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Schneider/ ABB/ C&S
8
-
99527
PANEL TYPE -02 Incoming :160 A CHANGEOVER SWITCH -1NOS., 160 FP Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS., Busbars :200A, 4P Aluminium Busbar Chamber for the entire length of the Panel, Outgoings:100Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -5 NOS, 63 Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -2 NOS, Metering : i) Digital Load Manager with RS 485 port, ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets., iii) CTs800A/5A 15VA burden Class 1.0 Accuracy with 0-800A Digital Ammeter with inbuilt selector switch - 1sets.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ ABB /C&S
2
-
102526
PANEL TYPE- 03 : Incoming :200 A CHANGEOVER SWITCH -1NOS, 200 FP Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :250 A, 4P Aluminium Busbar Chamber for the entire length of the Panel, Outgoings: 100Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -5 NOS., 63 Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -2 NOS.Metering : i) Digital Load Manager with RS 485 port, ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs800A/5A 15VA burden Class 1.0 Accuracy with 0-800A Digital Ammeter with inbuilt selector switch - 1sets,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider /ABB/ C&S
2
-
105526
UPS INPUT PANEL : INCOMER: 2 nos of 1250 A 36kA FP EDO ACB with electrical interlocking with c/c Each Incomer shall have one set of the following items:3 Nos.phase indicating LED lamps each with 2 amp back up MCB. With all measuring equipments as per sld, BUSBARS: TPN aluminium bus bars of minimum1500 Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 50KA for 1 sec.OUTGOING: 630 A TPN MCCB-3NO, 500 A TPN MCCB-3NO, 400 A TPN MCCB-3NO, 100 A TPN MCCB-3NO, 63A TPN MCB-3NO, Note: All outgoing MCCBs shall be with adjustable and inbuilt O/L & S/C protection, All breakers breaking capacities shall be Icu=Ics upto 433 V. 1 Set Rotary operating mechanism and terminal extension spreaders for all the MCCBs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
1
-
753267
UPS OUTPUT PANEL -01 INCOMER 2 nos of 630 A 36kA FP MCCB with electrical interlocking with c/c, 630 A BUS COPULER-1 , Each Incomer shall have one set of the following items:3 Nos.phase indicating LED lamps each with 2 amp back up MCB. With all measuring equipments as per sld, BUSBARS: FP aluminium bus bars of minimum1000Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 50KA for 1 sec. OUTGOING: 630 A FP MCCB-2NO, Note: All outgoing MCCBs shall be with adjustable and inbuilt O/L & S/C protection, All breakers breaking capacities shall be Icu=Ics upto 433 V., 1 Set Rotary operating mechanism and terminal extension spreaders for all the MCCBs.BUSBARS: FP aluminium bus bars of minimum1000Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 50KA for 1 sec. OUTGOING: 630 A FP MCCB-2NO, Note: All outgoing MCCBs shall be with adjustable and inbuilt O/L & S/C protection, All breakers breaking capacities shall be Icu=Ics upto 433 V., 1 Set Rotary operating mechanism and terminal extension spreaders for all the MCCBs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
1
-
223822
AHU PANEL-01 INCOMER: 63 A FP MCCB -1NO, Each Incomer shall have one set of the following items:3 Nos.phase indicating LED lamps each with 2 amp back up MCB. BUSBARS : FP aluminium bus bars of minimum 100 Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 25KA for 1 sec, OUTGOING: 40 A MCB-3NO, Note: All outgoing MCCBs shall be with adjustable and inbuilt O/L & S/C protection, 1 Set Rotary operating mechanism and terminal extension spreaders for all the MCCBs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
6
-
14770
AHU PANEL-02 INCOMER: 100 A FP MCCB -1NO, Each Incomer shall have one set of the following items:3 Nos.phase indicating LED lamps each with 2 amp back up MCB. BUSBARS: FP aluminium bus bars of minimum 160 Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 25KA for 1 sec.OUTGOING: 63 A MCB-3NO, Note: All outgoing MCCBs shall be with adjustable and inbuilt O/L & S/C protection, 1 Set Rotary operating mechanism and terminal extension spreaders for all the MCCBs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
6
-
20451
Supply Fabrication,Erection,testing & commissiioning of 415 V straight Run-630A TPN,415V,3-phase , 4Wire with 100% neutral and two runs of 50X6mm Cu earth strips - Indoor type Bus duct TPN non Phase sagregated Bus duct made out of 14SWG ms Sheet painting after seven tprocesses & consisting of suitable rating TPN CU Bus bar(@1.2A/Sqmm) including flexible braided connections at ends of facilitate connections and runing 2 runs of 50X6mm hot dip galvanised GI strip Auround bus duct complete as required .The bus duct shall be sandwich type (factory made) 630A caoacity TPN Copper Bus Duct ( indoor type) Bus duct should be supported with vertical supports and complete scaling of bus duct and ga drawing shall be approved by department,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
1
-
26359
Supply & fixining & testing of Copper Braided Flexible Jumper With necessary size enclosers box, hardware etc complete in all respect suitable for 630A sandwich bus duct including all necessary iteams etc, complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
1
-
15281
Supply & fixining & testing of Thermal flange with adopter box & extens 630A sandwich bus duct including all necessary iteams etc, complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Schneider/ABB/C&S
1
-
18803
UPS :- Supply, Installation, Testing and Commissioning of 400 kVA UPS system complete with battery charger for 20 minutes back up, IGBT Rectifier & Inverter with dust filters to operates with any load, static switches, filters etc. including aligning, levelling, grouting, supply & installation of all G.I hardwares, consumables, etc UPS should have self power test feature to avoid additional Load banks for testing of the UPS. It should also Pre alert the critical components before end of life & UPS Should have SNMP. Digital service for monitoring UPS equipment to increase resiliency and transparency through live data, directly to Smartphone. Remote update is provided through remote monitoring for connected assets 24x7.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: APC/ SCHNEIDER / NUMERIC/EMERSON
4
-
4870917
Supply, Installation, Testing and Commissioning of 400 kW Three Phase K-20 Rated Dry Type Input External Isolation Transformer, Input – 415V, Output – 415V, 50Hz, Delta star,forced air cooled, with supporting enclosure.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: MAGNETIC CONTROLS / ELMAS / DATSON
4
-
1001474
Supply, Installation, Testing and Commissioning of 144 Nos 12V 150 AH SMF battery including wire leads to support necessary back up 20 MIN on above UPS on 100% load at 0.8 pf.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make - Quanta / Racket /Exide
4
-
2298345
Supply, Installation, Testing and Commissioning of Accessories like DC cables, Battery MS racks, Battery interlinks, DC MCCB UV AUX IN ENCLOSURE, etc.,complete suitable for 400 KVA UPS.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
694664
Supply, Installation, Testing and Commissioning of 200 kVA UPS system complete with battery charger for 20 minutes back up, IGBT Rectifier & Inverter with Dust filters to operates with any load, static switches,filters etc. including aligning, levelling, grouting, supply &installation of all G.I hardwares, consumables, etc.UPS should have self power test feature to avoid additional Load banks for testing of the UPS. It should also Pre alert the critical components before end of life & UPS Should have SNMP.Digital service for monitoring UPS equipment to increase resiliency and transparency through live data, directly to Smartphone. Remote update is provided through remote monitoring for connected assets 24x7.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: APC/ SCHNEIDER / NUMERIC/EMERSON
2
-
2555371
Supply, Installation, Testing and Commissioning of 200 kW Three Phase K-20 Rated Dry Type Input External Isolation Transformer, Input – 415V, Output – 415V, 50Hz, Delta star, forced air cooled, with supporting enclosure.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: MAGNETIC CONTROLS / ELMAS / DATSON
2
-
580541
Supply, Installation, Testing and Commissioning of 80 Nos 12V 150AH SMF battery including wire leads to support necessary back up 20 MIN on above UPS on 100% load at 0.8 pf.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make - Qaunta / Racket /Exide.
2
-
1257011
Supply, Installation, Testing and Commissioning of Accessories like DC cables, Battery MS racks, Battery interlinks, DC MCCB UV AUX IN ENCLOSURE, etc.,complete suitable for 200 KVA UPS.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
342370
UPS :- Supply, Installation, Testing and Commissioning of 25 kVA UPS system complete with battery charger for 20 minutes back up, IGBT Rectifier & Inverter, static switches, filters etc. including aligning, levelling, grouting, supply & installation of all G.I hardwares, consumables, etc. UPS should have self power test feature to avoid additional Load banks for testing of the UPS. It should also Pre alert the critical components before end of life & UPS Should have SNMP.Digital service for monitoring UPS equipment to increase resiliency and transparency through live data, directly to Smartphone. Remote update is provided through remote monitoring for connected assets 24x7.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: APC / SCHNEIDER / NUMERIC/EMERSON
2
-
611966
Supply, Installation, Testing and Commissioning of 25 kW Three Phase K-20 Rated Dry Type Input External Isolation Transformer, Input – 415V, Output – 415V, 50Hz, Delta star, forced air cooled, with supporting enclosure.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: MAGNETIC CONTROLS / ELMAS / DATSON
2
-
172839
Supply, Installation, Testing and Commissioning of 32 Nos 12V 42 AH SMF battery to support necessary back up 20 MIN on above UPS on 100% load at 0.8 pf.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make - Qaunta / Racket / Exide
2
-
142903
Supply, Installation, Testing and Commissioning of Accessories like DC cables, Battery MS racks, Battery interlinks, DC MCB UV AUX IN ENCLOSURE, etc.,complete suitable for 25 KVA UPS.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
74428
Fabrication and providing MS items, like angles, Chequred plate providing for the UPS/ battery /Iso Tr. load to be devided equaly as per the builder requirement -KG/ meter Sq.channels, plates and flats with hardware, duly painted/powder coated etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3500
-
73
Supply, installation, testing and commissioning of IT server racks along with the In rack Cooling system (Micro DC) as per the following materials. Racks & Accessories i)Rack, 42U/800W/1200D with front glass & Rear split plain door with 3 point lock assembly and accessories Set 8 ii) Top & bottom cover with cable entry cut-out with anti-rodent glands Set 8 iii)Cable management accessories Set 8 iv)Roof light with limit switch (front & rear) Set 16 v) 1U 19" Black Modular Tool less Blanking panel (Pkt of 10) Set 16 Cooling System i)Split AC unit 3.5kW Set 8 ii) Copper tube assembly for Internal connection Set 8 iii) EFC with 3 fans assembly - Front Set 8 iv)EFC with 3 fans assembly – Rear Set 8 Power Requirement i)APC SMART-UPS RC 6000VA 230V FOR INDIA Set 8 iii) APC Smart-UPS RT 19" Rail Kit for Smart-UPS RT 3/5/7.5/10kVA Set 8, iii) Schneider UPS Network Management Card 2 with Environment Monitoring, Out of Band Access and Modbus Set 8 iv)APC Smart-UPS RC 192V Battery Pack, India Set 8, v) Rack PDU 2G, Metered, ZeroU, 32A, 230V, (36) C13 & (6) C19 - AP8853 Each 16, vi)Power panel assembly Set 8 , d.Monitoring System i Display - 7" Set 8 ii APC Alarm Beacon Each 8 iii Netbotz 250 Each 8 iv NetBotz Spot Fluid Sensor - 15 ft. Each 8 v Netbotz Smoke Sensor - 10 ft. Each 8 vi Netbotz door switch sensor Each 8 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE: SCHNEIDER / APC / VERTIVE
10
-
1603169
Supply, Installation, Testing and Commissioning of GSM & LAN Based Emergency Alert Generation and Monitoting system. It should connect to min. 7 Equipments and send SMS, Call & Email to 5 Designated contacts in the critical & emergency conditions. T,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: as per specifications of any ISI make
8
-
54558
External Electrification
-
-
-
33KV HT 3- BREAKER PANEL - Outdoor type: Supply, Installation,Testing & Commissioning of HT 3 - Breaker panel 33KV, 800A, 25-50kA outdoor type comprising of 2 No incoming and 1 No outgoing VCB panel with suitable auxillary contacts with 4 NO+4 NC,mechanical ON/OFF button, motorized/ manual etc,. complete CT: ClassSP10, 150VA, 100/5A Class 0.5 with fuses Ammeter, with selector switch 96sqmm digital voltmeter with selector switch 96sqmm digital PF Meter: Digital load manager (Class 0.5), Digital Relays: IDMTL, 2 o/c +1 EF master trip relay, trip circuit relay, differential relay, auxilary relay for transformer fault, suitable annunicator breaker control switch etc, complete for finished item of work, as per the instruction of Engineer-in-Charge. Separate cables to be provided to install Trivector Meter by TS Transco.The CTPT shall be tested for Accuracy at manufacturer premises in the presence of TS Transco engineer. Incomers : 800A, 26.24KA, TP,EDO VCBs with Voltmeter with 33KV/110V PT, Ammeter with 100/5A CTs, Over current & Earth Fault Numerical relays similar to CDG31, Phase Indication Lamps , Breaker On/ Off/ Trip and Spring Charge, and Trip Circuit healthy indications - 2nos, 8Window annunciator. Outgoing : 800A, 26.24KA, TP, EDO VCBs with Ammeter with 50/5A CTs, Overload & Earth Fault Numerical relays similar to CDG31, Phase Indication Lamps, Load manager with RS232 connectivity, Breaker On/ Off/ Trip and Spring Charge, and Trip Circuit healthy indications & Transformer protection relays as per the detailed specifications- 1no, 12Window annunciator,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: megawin/ABB/L&T/Legrand/Siemens/C&S
1
-
2681530
33KV HT 3- BREAKER PANEL -Indoor type Supply, Installation,Testing & Commissioning of HT 3 - Breaker panel as per details given 33KV, 800A, 25-50kA outdoor type comprising of 2 No incoming and 1 No outgoing VCB panel with suitable auxillary contacts, motorized/manual etc,. complete CT: ClassSP10, 150VA,100/5A Class 0.5 with fuses Ammeter, with selector switch 96sqmm digital voltmeter with selector switch 96sqmm digital PF Meter: Digital load manager (Class 0.5), Digital Relays: IDMTL, 2 o/c +1 EF master trip relay, trip circuit relay, differential relay, auxilary relay for transformer fault, suitable annunicator breaker control switch etc, complete for finished item of work, as per the instruction of Engineer-in-Charge.Incomer : 800A,26.24KA, TP,EDO VCB with Voltmeter with 33KV/110V PT, Ammeter with 100/5A CTs, Over current & Earth Fault Numerical relays similar to CDG31, Phase Indication Lamps, Breaker On/ Off/ Trip and Spring Charge, and Trip Circuit healthy indications - 1no Outgoing : 800A, 26.24KA, TP, EDO VCBs with Ammeter with 50/5A CTs, Overload & Earth Fault Numerical relays similar to CDG31, Phase Indication Lamps, Load manager with RS232 connectivity, Breaker On/ Off/ Trip and Spring Charge, and Trip Circuit healthy indications & Transformer protection relays as per the detailed specifications- 2nos,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: megawin/ABB/L&T/Legrand/Siemens/C&S
1
-
2532172
HT SWITCHGEAR (Outdoor type) : Supply, Installation,Testing & Commissioning of 33kV, 1500MVA Switchgear panels of Indoor/ outdoor type as per the schedule given 33KV, 800A, 25-50kA outdoor type comprising of 2 No incoming and 1 No outgoing VCB panel with suitable auxillary contacts, motorized/manual etc,. complete CT: ClassSP10, 150VA,100/5A Class 0.5 with fuses Ammeter, with selector switch 96sqmm digital voltmeter with selector switch 96sqmm digital PF Meter: Digital load manager (Class 0.5), Digital Relays: IDMTL, 2 o/c +1 EF master trip relay, trip circuit relay, differential relay, auxilary relay for transformer fault, suitable annunicator breaker control switch etc, complete for finished item of work, as per the instruction of Engineer-in-Charge. 33kV Panel – Outdoor kiosk type (near Point of Supply), consisting of 1no. Of 800A VCB, Voltmeter with 33kV/110V PT, Ammeter with100/5A CTs, Over-current, Short circuit & E/F relays similar to CDG31, Phase Indication Lamps, Breaker On/ Off/ Trip And Spring Charge, and Trip Circuit healthy indications along with Built-in power pack as per the technical specifications & data Sheets attached herewith (Note: The Voltmeter & Ammeter shall be Analog type for this panel and with built-in Power Pack for minimum of 3Openings & 3Closings Operations. The Secondary of the PT shall cater the Power pack).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: megawin/ABB/L&T/Legrand/Siemens/C&S
1
-
902472
DG-SET : Supply, Erection and commissioning of 1010KVA , 415V, 3phase 50HZ, 4 wire Radiator cooled DG sets with Electrical control panel with AMF relay to put the DG set "ON'/"OFF' in case of EB power failure & restore respectively (as per specifications attached) The local Control panel with ACB shall be accomodated within the accoustic enclosure on foundation. The Diesel Engine shall be complete with necessary control and safety devices as per CPCB-II, IS/ BS specifications. The Engine shall be suitable for continuous operation of Generator duty, inclusive of Fly wheel, flexible coupling, air cleaner, corrosion resistor, Radiator, fan with guard, Fuel pump, fuel filter, Electronic governor, starting system with separate Battery charger with 2nos 24V sealed Maintenance Free Batteries, Voltage regulator, Instrument panel with RPM Indicator, Exhaust silencer (residential), protections against Low Lub. Oil pressure, high water temperature and fuel lines from Fuel tank to DG set, battery stand, anti vibration pads and first filling of lubricating oil and fuel oil for set. The control Panel shall be suitable to operate from PLC in Main PCC for Auto operation and Interlocking arrangement.
3
-
7916153
Generator Set Specification Model KG1 1010 WS Duty Prime Power Rating kVA / kWe 1010/808 No. of Phases 3 Output Voltage and Frequency (V and Hz) 415 V, 50 Hz Power Factor 0.8 (lagging) Current (A) 1404 RPM 1500 Engine Specification Make KOEL Model DV 16 ETA G1 Required Power for Rated kVA (hp) 1210 Cooling Liquid Cooled Aspiration Turbocharged, after Cooled No. of cylinders 16 Bore(mm) x Stroke(mm) 130 x 150 Compression ratio 16.7:1 Displacement(litre) 31.86 Fuel High Speed Diesel Fuel Tank Capacity 990 Fuel consumption @75% load with radiator and fan*(litre/hr) 155.0 Performance class of genset ISO 8528-5 G2 Starting system 24 V DC Total4 CONTROLLER KG 745 control microprocessor based graphical LCD Display generator monitoring and control system. Alternator specification Make KIRLOSKAR Enclosure IP 23 Voltage regulation (Max.) ±1% Class of Insulation H Class Winding Pitch 2/3 Permissible Voltage Dip at full load 0.8 PF Lag 20% Time Permitted to built up rated Voltage at rated RPM 1Sec after engine reach rated RPM Short Circuit Ratio 0.477 Short Circuit with stand time 3 times rated current for 10 Sec Typical Enclosed Genset Dimensions (L x W x H) 7800 x 2300 x 2713 (Without Silencer) Wet Weight of DG Set (Kg) 13200 Kg. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer ,.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves.
-
-
-
Supply and Fixing of MS Exhaust Pipe of suitable size for 1010kVA DG sets cladded with 50mm thick Glass wool insulation covered with 24SWG Aluminum sheet and provided with rain cap, suitable for maximum allowable pressure 80mbar, Exhaust maximum temperature 438 degC etc. including all necessary items etc complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
240
-
754
Supply and installation of 990 Ltrs capacity Fuel tank made out of MS sheet with Inlet/ Outlet conecting plugs, Drain valve and Scale with level monitoring provision with BMS/PLC etc,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
108839
Supply and fabrication of supports for silencer/ exhaust pipe made out of MS channels/angles including cutting, welding and fabrication to the required size and painting with 2 coats of anti corrosive paint and 2 coats of synthetic enamel paint of Grey/ Black color complete as required (as per CPCB-II norms upto Terrace floor) . NOTE: If the DGs are located open to sky then a suitable stack has to be provided upto minimum of 30Mtrs height as per CPCP-II norms.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
110
Supply, fixing and installation of Hot / Fresh air exhaust/supply ducts with suitable size frame Al./ GI ducts with all fixing accessories, insulation as required etc. The Al./GI sheet shall be as per required standards and directions of the Engineer-in-Charge for finished item of work etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
3122
DG Synchronization Panel : Supply, Installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2mm thick CRCA sheet after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only duly following IS 61439 code. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Incoming 1 & 2: 1600A, 50KA 4Pole EDO Electrically operated drawout type ACB with Micro Processor releases for Overload and earth fault and UV coil & 400A AC3 duty 4Pole Contactor -3sets Busbars : 5000A TPN Alumnium busbars-1set Outgoings : 4000A 50KA 4pole EDO ACB with micro procerssor based releases -3sets. suitable to connect adapter box and auxillary equipment suitable for BMS software,,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. complete. Make for Switchgear : L&T/Legrand/Scheider /ABB/C&S/Havells Metering for Each
1
-
4448883
Incomer : Digital Voltmeter -1 set, Digital Ammeter with resin cast 15VA, class 1 CTs - 1set, Digital KW Meter - 1set, Digital Energy Meter -1set, LED type phase indication lamps with individual fuse and toggle switch control -1set, Indication Facia for DG Faults/ alarm with Hooter -1set, Woodwards Easygen 2500 relays/ eqvt (Each relay shall have features for Auto start/ Auto stop on mains failure, auto synchronisation/ auto load sharing features and communication ports to communicate with other relays) - 1set, Metering for Each Outgoing: Digital Voltmeter -1 set, Digital Ammeter with resin cast 15VA, class 1 CTs - 1set, Digital Energy Meter -1set, LED type phase indication lamps with individual fuse and toggle switch control -1set , Note : The panel shall be provided with following in addition to the above: Manual synchronisation with Lamps, Synchroscope, Governor Lower/ rise Push buttons, AVR Lower/ rise Push buttons for all Four sets along with required selector switches and indication lamps , The facility shall be available to select any one DG Breaker as Synchronising breaker
-
-
-
Supply, laying and commissioning of 7core 1.5sq.mm size 1.1KV grade PVC insulated armored multi strand copper cable in existing cable trench or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kable/Finolex
350
-
203
Supply, laying and commissioning of 14core 1.5sq.mm size 1.1KV grade PVC insulated armored multi strand copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kable/Finolex
350
-
386
Supply, laying and commissioning of 3core 4.0sq.mm size 1.1KV grade PVC insulated armored multi strand copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kable/Finolex
350
-
206
Providing Double compression end terminations for the cable 7core 1.5sq.mm with compression type steel gland, Bi-metallic lugs using crimping tool,Insulation tape, Identification tags etc., including end termination and Earthing of Gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Jainson/Dowells
6
-
327
Providing Double compression end terminations for the cable 14core 1.5sq.mm with compression type steel gland, Bi-metallic lugs using crimping tool,Insulation tape, Identification tags etc., including end termination and Earthing of Gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Jainson/Dowells
6
-
491
Providing Double compression end terminations for the cable 3core 4.0sq.mm with compression type steel gland, Bi-metallic lugs using crimping tool,Insulation tape, Identification tags etc., including end termination and Earthing of Gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Raychem/Mseal
6
-
162
Transformer : Supply, Installation, Testing and Commissioning of 33kV/433V, 2500KVA Indoor Dry Type(Cast Resin Type) Copper wound Distribution Transformer with On Load Tap Changer (OLTC), Remote Tap Changer Control Panel (RTCC) & AVR complete with all components and accessories as per Technical Specifications and Data Sheets attached (Cable End boxes shall be provided on both HT side & LT side for provision for Sandwich type Bus Duct of rating 3200A). (NOTE: Confirming to latest ECBC, Table 8.2 norms) 1. Rated KVA : 2500 KVA (Cast Resin) 2. Service: Indoor 3. Mounting : Floor. 4. Copper wound : Double. 5. Type of cooling : ANAN. 6. Insulation Class : Class F 7. Temparature rise by resistance : 90⁰C 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts :33000 11. Primry Frequency : 50Hz 12.Primary Phases :3, 13. Primary wires:3, 14. Secondary connection : Star, 15. Secondary Volts : 433V / 415V 16. Secondary phases : 3, 17. Secondary wires: 4 , 18. Taps on primary winding for primary voltage variation : +5.0% to - 10.0% in steps of 2.5% through links. 19. Terminal arrangement. a. HV: Cable end box b. LV : bus duct/cable end box 20. at 50% loading losses (Watts):10750 W (Max.) 21. at 50% loading losses (Watts):10750 W (Max.) 22. Impedance(Z%) : 6.25% , 23. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Winding temporature Indicator e. Seperate neutral bushing f. Uni directional flat rollers.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Essenar/Voltamp/Schneider/Kirloskar
2
-
6998684
Load Break Switch : Supply, Installation ,Testing & commissioning of 33KV 800A 1500MVA Outdoor, floor mounted type HT load break switch with enclosure as per TSPDCL requirement. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : Megawin/Pentagon/ Venkateshwara/Jyothi.
2
-
902472
Installation of CTPT & Metering cubicle on the plinth. CTPT & Metering cubicle will be supplied by TSSPDCL including transportation charges etc complete etc for finished item of work. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
35000
Supply, installation, testing and commissioning of 110V DC, 100AH Battery Bank with 12V Sealed Maintenance Free (SMF) type Lead acid Batteries in a rack including all protections as per detailed specification including suitable Battery charger with all components for trickle & boost charging facility. The battery charger shall be floor mounting indoor type, accommodated in sheet steel enclosure fabricated out of 2mm CRCA sheet with hinged doors -with powder coated paint free standing etc complete as required. Necessary mounting stand for the battery bank shall be supplied along with charger, including interconnecting links. The charger and battery shall conform to the Technical specifications.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Quanta/Racket/Exide or its equivalent.
1
-
265859
LT Kiosk : Supply, Installation, Testing & Commissioning of 4000A, 50KA, 4Pole MDO ACB with Microprocessor based releases for open circuit and short circuit earth fault with core balance CT of ratio 4000/5A CL:1.0, 15VA CT's and Metering (Voltmeter, Ammeter and Indication Lamps) in Indoor type enclosure made out of 2mm thick CRCA sheet including all accessories like suitable MCBs as per the requirement. The enclosure shall have provision for busduct entry for incoming & busduct/cables for outgoing. The Panel shall be Indoor kiosk type. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:L&T/ABB/ Seimens/ schnider /Havells/Legrand/C&S
2
-
708958
Supply, laying and commissioning of size 3CX300sq.mm, 33KV grade(E), XLPE insulated, armored, aluminium conductor under ground cable in ground at a depth of 1000mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and PCC slab on top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098 NOTE: Cable pull chambers with covers shall be provided @ every 15mtrs interval with suitable dimensions for easy cable laying. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Polycab/KEI/Unicab/Havells
600
-
2874
Supply, installation, testing and commissioning of end termination for 3CX300sq.mm, 33KV Outdoor type Cable with Ray chem Heat shrinkable cable jointing kits including all items as per the site requirement etc, complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Raychem/Transeal/M seal.
2
-
17232
Supply, installation, testing and commissioning of end termination for 3CX300sq.mm, 33KV Indoor type Cable with Ray chem Heat shrinkable cable jointing kits. including all items as per the site requirement etc, complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Raychem/Transeal/M seal.
12
-
11802
SANDWICH TYPE BUSDUCTS- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -4000A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct TPN non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 4000 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/ Havells/C&S
200
-
37126
Supply,fixing and testing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect suitable for 4000A Sandwich busduct including all necessary items etc ,complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
4
-
65613
Supply, fixing and testing of Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete for 4000A Sandwich busduct including all necessary items etc .complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/Havells/C&S
4
-
17894
SANDWICH TYPE BUSDUCTS- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -2500A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 2500 Amp Capacity TPN Aluminium Bus Duct (Indoor type) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 2500 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
300
-
27586
Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect for 2500 Amp Capacity TPN Aluminium Bus Duct (Indoor type) and accessories as mentioned below (Main Panel to AC Chillers Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/Havells/C&S
2
-
47718
Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 2500 Amp Capacity TPN Aluminium Bus Duct (Indoor type) and accessories as mentioned below (Main Panel to AC Chillers Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
2
-
17894
SANDWICH TYPE BUSDUCTS- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -1600A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 1) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 2500 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider./Havells/C&S
350
-
16199
Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect. 1600 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
4
-
29824
Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 1600 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
2
-
17894
TAP OFFs:Supply and installation of 250A 35KA TPN MCCB (Raw Power Rising main) with suitable enclosure (Factory made & suitable to the Sandwich Rising Mains) as a Tap Off on the above Rising Main/ Busduct. The buslinks shall be provided with suitable material bolts, nuts & washers shall be suitable to terminate suitable rating XLPE or Cu Unarm. cables on O/G and also with suitable rating resincast CTs and with dual reading digital energy meters (DWH). The energy meters shall have RS485 port for BMS Compatability. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
28
-
30326
Supply and installation of 160A 25KA TPN MCCB (Raw Power Rising main) with suitable enclosure (Factory made & suitable to the Sandwich Rising Mains) as a Tap Off on the above Rising Main/ Busduct. The buslinks shall be provided with suitable material bolts, nuts & washers shall be suitable to terminate suitable rating XLPE or Cu Unarm. cables on O/G and also with suitable rating resincast CTs and with dual reading digital energy meters (DWH). The energy meters shall have RS485 port for BMS Compatability. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
24
-
21975
End Feed Units Supply & Installation of the 1600A rated (Between Main PCC & Raw Power Rising Main) End Feed Units with 4-Pole ACB, 50KA along with compl;ete fixing accessories, LHS/RHS type as required by site condition, Bus truncking integrally fitted, cable gland plates for outgoing cables etc completely ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
2
-
244808
MV Paenls : Supply, installation, Testing and Commissioning of 3phase and Neutral 415V, 4 wire Free Standing, Floor mounted MV panel made out of 2mm thick CRCA sheet after seven tank process and Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A per Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switch gear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have at least two spare cubicles of the maximum outgoing MCCB rating. The Panels shall be mounted on ISMC-75 including supply and fixing of the same. Every ACB shall be provided with ON/OFF/Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All MCCBs shall be provided with microprocessor based releases & with Neutral link. The fault level indicated in the Schedule are the minimum ratings All Switchgear shall have Rotary Handles. All CTs shall be Cast Resin Type (CRT). All the Panels shall have provision for extending on both the sides. All Incomers Switchgears shall have 4NO + 4NC Auxilliary Contacts inbuilt. The panel shall be extendable type on both the sides.
-
-
-
MAIN PCC PANEL: Design, fabrication testing and commissioning of Main PCC Panel as per IEC 61349 (1&2) (PTTA) the given specification with EB Incomers 1&2 : 3200A 65KA,EDO FP ACB with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F – 2sets DG Incomers 3&4 : 3200A 65KA,EDO FP ACB with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F – 2sets Buscoupler : 3200A 65KA,EDO FP ACB with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F – 1set , Outgoings: 2500A 50KA TPN ACBs with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F – 4nos, 1250A 50KA TPN ACBs with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F – 2nos, 1000A 50KA TPN ACBs with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F - 2 Nos, 630A 50KA TP+NL MCCBs - 8 Nos, 400A 35KA TP+NL MCCBs- 2 Nos, 250A 35KA TP+NL MCCs- 6 Nos, 125A 35KA TP+NL MCCBs- 2 Nos, 160A 25KA TP+NL MCCB and 80 KVAR 415V Delta connecte MPP capacitor Banks- 4 Nos, 125A 50KA FP MCCB with TVSS - 2Nos Panel shall be extendable type on both the sides. Metering : i) 0 - 500V Digital Voltmeter with Selector switch – 4sets, ii)0-3200A Digital Ammeter with CTs of Ratio 3200/5A, Class 1 Accuracy and 15VA burden and selector switch -4sets, iii)LED type Phase indication lamps with individual TPMCB control and toggle switches -4sets, iv) Control MCBs for Power failure indication -4sets, v)3200-1600/5A CT in R Phase for APFCR –2sets, vi) CT Operated load Manager with RS485 connectivity – 4nos, vii)CT Operated energy meter with RS485 connectivity – 22nos Note : PLC based Electrical Interlocking with auto change over to be provided for all the Incomers and Bus coupler. Provision for DG AMF sensing to be made.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:- Siemens / Legrand / L&T
1
-
7598003
AUTOMATIC PF IMPROVEMENT PANEL (APFCR PANEL- 1&2) - Design, fabrication Supply, installation, testing and commissioning of APFCR Panel as per IEC-61439 standards (PTTA) with Incoming : 400A 35KA TPN MCCB with Neutral link – 1set, Bus bars : 400A TPN Aluminium Bus bars-1set, Outgoings: 125A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 50KVAR MPP 440V Delta connected heavy duty Capacitors-2sets, 63A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 25KVAR MPP 440V Delta connected heavy duty Capacitors-1set, 63A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 20KVAR MPP 440V Delta connected heavy duty Capacitors-1set, 40A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 15KVAR MPP 440V Delta connected heavy duty Capacitors-2sets, 63A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 25KVAR MPP 440V Delta connected heavy duty Capacitors-SPARE CUBICLE – 1set, Features: Microprocessor based regulator capable of switching stages fitted with detuned filters of approprirate rating with use of electro mechanical contactors and monitoring simultaneously various electrical parameters like V,I,PF,KW,KVA,Harmonics, Each Individual Stage to be controlled by the Regulator through Electronic Contactors. Both Automatic and Manual Mode Availabe, Metering For Incomer : 0-500V Digital Voltmeter with selector switch and fuses-1 set , 0-400A Digital Ammeter with CTs of Ratio 400-200/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set , LED Phase indication lamps with individual fuse and control with toggle switches- 1 set, 7 stage micro processor based APFC relay with PF meter-1set ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
(Makes: SIEMENS ( 3WL) / Legrand (DM3) / L&T (U Power - Omega)
2
-
474115
Design, fabrication,Supply, installation, testing and commissiong of COMMON UTILITIES PANEL as per IEC 61439 (PTTA) with Incoming : 250A 25KA TPN MCCB with thermal setting plug – 2sets, Bus bars : 250A TPN Aluminium Bus bar - 1Set, Outgoings : 63A 16KA TPN MCBs-16Nos, 63A 16KA TP MCBs ('C'-curve)- 2Nos, 25A 10KA TP MCBs ('C'-curve) – 12Nos, 75A TP AC3 duty contactor with timers -2sets, 20A 10KA DP MCBs ('C'-curve) – 8Nos, 22A TP AC3 duty contactor with timers -8sets, Metering : i) 0 - 500V Voltmeter with Selector switch – 2sets ii)0-250A Digital Ammeter with CTs of Ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -2sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, iv)Digital Energy Meters – 8Nos MECHANICAL INTERLOCKING SHALL BE PROVIDED BETWEEN BOTH THE INCOMERS etc complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.(Makes: SIEMENS / Legrand / L&T/Schneider/ABB/Havells)
1
-
172627
Supply, installationa and commissioning of PUMPS PANEL as per IEC 61439 (PTTA) with Incoming : 125A 25KA TPN MCCB with thermal setting plug–2sets, Bus bars : 125A TPN Aluminium Bus bars - 1Set, Outgoings: 63A 16KA TPN MCBs -2Nos, MPCB with DOL starters with L/R selector switch,remote control for 4HP –3Nos, MPCB with DOL starters with L/R selector switch,remote control for 2HP –3Nos, MPCB with DOL starters with water level controller, L/R selector switch,remote control for 7.5HP – 4Nos, MPCB with DOL starters with water level controller, L/R selector switch,remote control for 4HP – 2Nos, MPCB with DOL starters with water level controller, L/R selector switch, remote control for 1HP – 5Nos, DOL starters with MPCBs (spares) - 2Nos, Metering: i) 0 - 500V Voltmeter with Selector switch – 2sets, ii)0-125A Digital Ammeter with CTs of Ratio 125/5A, Class 1 Accuracy and 15VA burden and selector switch -2sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, MECHANICAL INTERLOCKING SHALL BE PROVIDED BETWEEN BOTH THE INCOMERS etc, complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : L&T/seimens/Legrand/Schnider/Havells/ABB
1
-
187215
Supply, installation and commissiong of LIFTS PANEL as per IEC 61439 (PTTA) with Incoming : 250A 25KA TPN MCCB with with thermal setting plug & 250A FP Auto Change Over Switch – 1set, Bus bars : 250A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 25KA TPN MCCBs – 7Nos, 63A 16KA TPN MCBs – 1No, 25A 10KA DP MCBs – 16Nos, Metering :i) 0 - 500V Voltmeter with Selector switch – 1set , ii)0-250A Digital Ammeter with CTs of Ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/Schnider/Havells/ABB
1
-
108196
Supply, installation and commissiong of VENTILATION PANEL as per IEC 61439 (PTTA) with Incoming : 630A 50KA TPN MCCB with thermal setting plug – 2sets, Bus bars :630A TPN Aluminium Bus bar – 1Set, Outgoings : 63A 16KA TPN MCBs – 16Nos, 16A 10KA TPN MCBs – 48Nos, Metering : i) 0 – 500V Voltmeter with Selector switch – 1set, ii)0-630A Digital Ammeter with CTs of Ratio 630/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: L&T/seimens/Legrand/ Schnider/ Havells/ ABB
1
-
198156
Supply, installation and commissioning of AC CHILLERS PANEL as per IEC 61439 (PTTA) wtih EB Incomers 1&2 : 2500A 50KA,EDO FP ACB with Microprocessor based inbuilt display phase wise amps with releases of O/L, S/C, Neutral Protection & E/F – 2sets, Buscoupler : 2500A 50KA, EDO FP ACB with Microprocessor based inbuilt display phase wise amps with releases of O/L, S/C, Neutral Protection & E/F – 1set, Bus bars : 2500A TPN Aluminium Bus bars with 100% neutral – 1Set, Outgoings: 1000A 50KA TPN ACBs with Microprocessor based inbuilt display phase wise amps with releases of O/L, S/C, Neutral Protection & E/F – 5nos, 400A 35KA TP+NL MCCBs – 5nos, 250A 35KA TP+NL MCCBs-3nos, 100A 25KA TP+NL MCCBs-5nos, 63A 16KA TP MCCBs – 4Nos,Star Delta starter suitable for 14KW – 4nos, 63A 50KA FP MCCB with TVSS (transient voltage surge suppressor)- 1No, Metering : i) 0 - 500V Digital Voltmeter with Selector switch – 2sets, ii)0-2500A Digital Ammeter with CTs of Ratio 2500/5A, Class 1 Accuracy and 15VA burden and selector switch -2sets, iii)LED type Phase indication lamps with individual TPMCB control and toggle switches -2sets, iv) Control MCBs for Power failure indication -2sets, v) CT Operated load Manager with RS485 connectivity – 2nos, Both the Incomers & Bus coupler shall be provided with Mechanical Interlocking arrangement ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/Havells/ABB
1
-
2111637
Supply, installation and commissiong of SECONDARY PUMPS PANEL as per IEC 61439 (PTTA) with Incoming : 250A 35KA TPN MCCB with thermal setting plug -2sets, Bus bars :250A TPN Aluminium Bus bars – 1Set, Outgoings : 125A 25KA TP MCCBs – 5Nos, VFD with Star Delta bypass starter suitable for 32KW with ON/OFF/TRIP Indications, Auto/Manual selector switch – 5nos, Metering : i) 0 - 500V Voltmeter with Selector switch – 2sets, ii)0-250A Digital Ammeter with CTs of Ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -2sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, Both the Incomers shall be provided with Mechanical Interlocking arrangement,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/ABB
1
-
942152
MV Cables
-
-
-
Supply, laying and commissioning of 3.5 core 300Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
100
-
1677
Supply, laying and commissioning of 3.5 core 240 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
1050
-
1373
Supply, laying and commissioning of 3.5 core 185 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
560
-
1081
Supply, laying and commissioning of 3.5 core 120 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
200
-
776
Supply, laying and commissioning of 3.5 core 95 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
100
-
634
Supply, laying and commissioning of 3.5 core 70 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI
100
-
483
Supply, laying and commissioning of 3.5 core 50 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
322
-
376
Supply, laying and commissioning of 3.5 core 35 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
50
-
286
Supply, laying and commissioning of 3.5 core 25 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
50
-
240
Supply, laying and commissioning of 4 core 16 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
888
-
188
Supply, laying and commissioning of 4 core 10 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
617
-
170
Supply, laying and commissioning of 4 core 6 Sq.mm size 1.1KV grade XLPE insulated armored aluminum conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
2472
-
153
Supply, laying and commissioning of 4 core 16 Sq.mm size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
500
-
844
Supply, laying and commissioning of 4 core 10 Sq.mm size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
500
-
527
Supply, laying and commissioning of 4 core 6 Sq.mm size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
500
-
342
Supply, laying and commissioning of 4 core 4 Sq.mm size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
150
-
243
Supply, laying and commissioning of 4 core 2.5 Sq.mm size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
500
-
162
Supply, laying and commissioning of 3core 2.5sq.mm Copper for APFCR & DG sensing size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Unicab / Polycab / Havells / KEI .
995
-
133
Supply, laying and commissioning of 3core 4sq.mm Copper(for 5HP Motors)size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
345
-
168
Supply, laying and commissioning of 3core 6sq.mm Copper (For 7.5HP Motors size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
1050
-
238
Supply, laying and commissioning of 3core 16sq.mm Copper size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
800
-
417
Supply, laying and commissioning of 3core 25sq.mm Copper size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
408
-
1267
Supply, laying and commissioning of 2core 2.5sq.mm Copper size 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098, ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
100
-
99
Supply, laying and commissioning of 19core1.5sq.mm Copper 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098, ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
125
-
462
Supply, laying and commissioning of 1 core 50Sq.mm Copper Flexible 1.1KV grade XLPE insulated armored Copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
300
-
707
Supply, laying and commissioning of 1 core 35Sq.mm Copper Flexible , in built up cable trench or on cable tray with all installation materials. When the cable is to be laid in ground, the same shall be laid at a depth of 750mm below ground level including excavation and refilling of earth after cables are laid, providing protection with sand and bricks at sides and top and cable route markers at every 50mtr. interval and also at the turnings. The cable shall conform to IS 7098. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Unicab / Polycab / Havells / KEI .
150
-
497
Supply and fixing of single compression brass cable glands for 3.5 core 300sqmm XLPE armoured cable with brass washers complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels..
8
-
779
Supply and fixing of single compression brass cable glands for 3.5 core 240Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
44
-
643
Supply and fixing of single compression brass cable glands for 3.5 core 185Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
20
-
569
Supply and fixing of single compression brass cable glands for 3.5 core 120Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
10
-
458
Supply and fixing of single compression brass cable glands for 3.5 core 95Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
10
-
305
Supply and fixing of single compression brass cable glands for 3.5 core 70 Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
10
-
305
Supply and fixing of single compression brass cable glands for 3.5 core 50Sq.mm XLPE armoured cable with brass washers complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
4
-
190
Supply and fixing of single compression brass cable glands for 3.5 core 35Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
8
-
190
Supply and fixing of single compression brass cable glands for 3.5 core 25Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
8
-
190
Supply and fixing of single compression brass cable glands for 4 core 16Sq.mm XLPE armoured cable with brass washers complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
16
-
145
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 300Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
8
-
184
Supply and fixing of aluminium lugs confirming to I.S specifications for cable 3.5 core 240Sq.mm including nuts and bolts with connections.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
44
-
333
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 185Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
20
-
245
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 120Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
10
-
143
Supply and fixing of aluminium lugs confirming to I.S specifications for cable 3.5 core 95Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
10
-
104
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 70Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: SMI / Commet / Dowels.
10
-
97
Supply and fixng of aluminium lugs confirming to I.S specifications for cable of 3.5 core 50Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
4
-
80
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 35Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
8
-
73
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 3.5 core 25Sq.mm including nuts and bolts with connections. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels.
8
-
59
Supply and fixing of aluminium lugs confirming to I.S specifications for cable of 4 core 16Sq.mm including nuts and bolts with connections.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
16
-
66
Supply and fixing of end terminations for 4 core 10Sq.mm size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
-
-
223
Supply and fixing of end terminations for 4 core 6Sq.mm size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
32
-
223
Supply and fixing of end terminations for 4 core 16Sq.mm size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
8
-
223
Supply and fixing of end terminations for4 core 6Sq.mm copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
8
-
223
Supply and fixing of end terminations for 4 core 4Sq.mm copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
8
-
223
Supply and fixing of end terminations for 4 core 2.5Sq.mm size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
8
-
223
Supply and fixing of end terminations for 3core 2.5sq.mm Copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland for DG sensing etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
32
-
210
Supply and fixing of end terminations for 3core 4sq.mm Copper(for 5HP Motors) size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
10
-
210
Supply and fixing of end terminations for 3core 6sq.mm Copper (For 7.5HP Motors) size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: SMI / Commet / Dowels/Jaison.
8
-
210
Supply and fixing of end terminations for 3core 16sq.mm Copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: SMI / Commet / Dowels/Jaison.
24
-
210
Supply and fixing of end terminations for 3core 25sq.mm Copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
24
-
210
Supply and fixing of end terminations for 2core 2.5sq.mm Copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: SMI / Commet / Dowels/Jaison.
4
-
173
Supply and fixing of end terminations for 19core1.5sq.mm Copper size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
4
-
405
Supply and fixing of end terminations for 1 core 50Sq.mm Copper Flexible size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
12
-
173
Supply and fixing of end terminations for 1 core 35Sq.mm Copper Flexible size cables including single compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
6
-
165
Supply and fixing of Ladder type cable Trays made with MS angles / supports and Including fabrication, painting with all necessary clamps etc. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1500
-
83
G.I. Pipe Earth station, Supply, erection, commissionig,testing and Providing standard G.I. Pipe Earth station, with 38mm dia. G.I. pipe including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogeneous mixture of salt charcoal around the pipe etc, completely as per IS 3043,1987 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge..
4
-
4778
Supply, erection, commissioning, testing and Providing standard Copper Plate Earth station, with 600X600X3.15mm thick copper plate including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogeneous mixture of salt charcoal around the plate etc, completely as per IS 3043,1987 or latest revision. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
13962
Supply, erection,commissioning,testing and providing Cast Iron (C.I.) Earth station,with 100mm dia. Cast iron pipe having a brazed 12mm dia X 50mm long brass bolt at the top end with 2 nuts and 4 washers,including construction of brick pedestal, providing meshed funnel,CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe etc, completely as per IS 3043, 1987 or latest revision.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
6121
Supply and laying of Copper/ Brass/Bronze flat bar 10x32x300mm mounted on two DMC Insulators (such as acro type 4649) holes of 8mm dia to accommodate 1/4" connection bolts with washers and butterfly nuts all made of brass or copper (Location: Elec room/ Every floor).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
40
-
5113
Supply and laying of 50X6mm GI earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
197
Supply and laying of 25X6mm GI earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2000
-
111
Supply and laying of 25X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
800
-
926
Supply and laying of50X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
1827
Supply and laying of 8SWG Bare Copper wire including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
95
Supply and laying of 8SWG Bare GI wire including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1200
-
19
Supply and Installation of 600mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
250
-
1125
Supply and Installation of 450mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
988
Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2600
-
835
Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
466
Supply and Installation of 600mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
954
Supply and Installation of 300mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
596
Supply and Installation of 150mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / ceiling etc. Complete. The tray shall be provided with 2-runs x 25mm x 6mm GI strip. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
477
Supply and laying of 100mm dia Heavy guage, 14SWG G.I. pipes with collars for taking Cables / road crossings, laid at a depth of 750mm below ground level including civil engineering works ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
1325
Supply and laying of 200mm dia Heavy guage, 14SWG G.I. pipes with collars for taking Cables / road crossings, laid at a depth of 750mm below ground level including civil engineering works and ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
3334
Supply and laying of 150mm dia NP2 RCC hume pipes with collars for road crossings, laid 600/750/1000mm below ground level including civil engineering works ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
755
Supply and laying of 300mm dia NP2 RCC hume pipes with collars for road crossings, laid 600/750/1000mm below ground level including civil engineering works ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
1049
Supply and providing of 2000mm X 1000mmx 12mm thick size Electrical Insulating Mat of 6mm thick with Class C insulation shall withstand voltages up to 65kV ac and 240V dc. And every meter of Mat Tested & stamped to IS:15652-06 specification with ISI marking. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
24
-
4545
Supply and fixing of 4Nos of 9Ltrs capacity round bottom bucket with sand, duly painted with enamel white inside & red out side and letter FIRE with black colourin cluding required stand for holding sand buckets etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
25
-
1377
Supply and fixing of 33KV grade Rubber Hand gloves as per IS standards,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
239
Supply and fixing of First Aid boxes of size 18” x 12” x 8” ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
1284
Supply and fixing of Discharge rod of 4 section pipe, frp base material with 15feet length and discharge capacity upto 765V of heavy duty type along with crocodile and C type clamp and rubber hand grip and its accessories as per standards for finished item of work. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
2892
Supply and fixing of 33000V Danger notice boards in 3 languages (English,Hindi&Telugu) of size 250x200mm as per the requirement ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
267
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1Kg, Empty Weight 14.6Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty including transportation, and all labour charges etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Cease Fire/Minimax
28
-
11021
Supply & Fixing of ABC stored pressure squeeze grip type Fire Extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty including transportation, all taxes and all labour charges etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Cease Fire/Minimax
6
-
9271
Supply and providing of Chain link Fencing of 2400mm Height from ground level and 300mm below ground level using angle iron of size 50x50x6mm at spacing of 1.5mtr embedded to adepth of 0.3 Mtr in CC M15 foundation bed of size 30x30x40cms providing flat iron support of size 25x6mm on top, bottom and middle and GI chaine linmk mesh of 8 SWG fixed to the angle iron painted with one coate of red oxide and 2 coates of alluminium paint including transportation, all taxes and all labour charges etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
3589
Supply and spreading of 40mm dia Metal stones in the yard for 300mm thick for finished item of work as per the specifications and drawings ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5
-
1444
Preparation & submission of drawings, documents, Liasoning with TSSPDCL/ CEIG /Local authorities for load sanction, shutdown, release of power upto premises.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
650000
Automatic Street Light Control System
-
-
-
Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50HZ with suitable SMC enclousure of IP 54 protection, MCBs and contactor suitable to control the load of 12KW of Three phase load with necessary clamping arrangements including transportation, all taxes except GST and all labour charges etc complete.The work should be carried out as per the specificaitons and directions of Engineer-in-Charge. Makes: swadeep Nature switch/lightmate/L&T/Seimens/Bajaj
2
-
21019
Landscape Lighting
-
-
-
Supply, installation, commissioing and testing of 3WAY BOLLARD with the following Power:27 WATTS, Material:ALUMINIUM DIE CAST. IP RATING:I P65, CHIPSET:CREE,CTC:3000K ,BIN:02, LUMEN O/P: 1299 LUMENS, DRIVER:IP 65 DRIVER COLOR: GRAPHITE GREY, POWER FACTOR:0.97 , BEAM ANGLE:112 DEGREES, HEIGHT :2000MM WARRANTY: 5 YEARS,SWITCH GEAR:ON/OFF INPUT VOLTAGE:165V-265V, SURGE PROTECTION :INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Bajaj/Crompton/Wipro/Havells
75
-
28404
Supply, installation, commissiong and testing of MODEL:SPIKE LIGHT WITH LENS Power:12 WATTS Material:ALUMINIUM DIE CAST. IP RATING:IP65. CHIPSET:CREE CTC:3000K BIN:02 LUMEN O/P:864 LUMENS DRIVER:IP 65 DRIVER COLOR:DARK GREY POWER FACTOR:0.97 BEAM ANGLE:23 DEGREES HEIGHT :348MM WARRANTY:5 YEARS SWITCH GEAR:ON/OFF INPUT VOLTAGE:165V-265V SURGE PROTECTION: INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ; Bajaj/Crompton /Wipro/Havells
120
-
8976
Supply, installation, commissiong and testing of MODEL:SPIKE LIGHT WITH LENS, Power:3 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP65 CHIPSET:CREE, CTC:3000K, BIN:02, LUMEN O/P:300 LUMENS, DRIVER:IP 65 DRIVER, COLOR:DARK GREY, POWER FACTOR: 0.97, BEAM ANGLE:23 DEGREES HEIGHT :327 MM, WARRANTY:5 YEARS, SWITCH GEAR: ON/OFF INPUT VOLTAGE:165V-265V SURGE PROTECTION:INCLUDED IES FILES: AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/ Wipro /Havells
150
-
6249
Supply, installation, commissiong and testing of MODEL:PILLAR HIGHLIGTER WITH CONCAVE LENS, Power:8 WATTS Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:CREE, CTC: 3000K, BIN:02, LUMEN O/P: LUMENS DRIVER:IP 65 DRIVER, COLOUR : GRAPHITE GREY, POWER FACTOR:0.97, BEAM ANGLE: 8 DEGREES HEIGHT :140 MM, WARRANTY: 5 YEARS SWITCH GEAR:ON/OFF INPUT VOLTAGE :165V-265V SURGE PROTECTION: INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/ Crompton/ Wipro/Havells
50
-
7385
Supply, installation, commissioning and testing of MODEL:SURFACE WALL LIGHT WITH HIDDEN SOURCE, Power:6 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:CREE, CTC:3000K, BIN:02, LUMEN O/P:450 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : GRAPHITE GREY, POWER FACTOR:0.97, BEAM ANGLE:15 DEGREES, DIMENSION :200X32X80 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
200
-
5624
Supply, installation, commissiong and testing of MODEL:RECESSED WALL LIGHT , Power:6 WATTS (1WX6), Material:ALUMINIUM DIE CAST, IP RATING:IP65,CHIPSET:CREE, CTC:3000K, BIN:02 , LUMEN O/P:660 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : GRAPHITE GREY , POWER FACTOR:0.97, BEAM ANGLE:20 DEGREES Dimension:131X60X108 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION: INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/ Crompton/ Wipro/Havells
190
-
8180
Supply, installation, commissiong and testing of MODEL:SURFACE LIGHT WITHOUT DRIVER , Power:4 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:CREE, CTC:3000K, BIN:02, LUMEN O/P:300 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : BLACK, POWER FACTOR: 0.97, BEAM ANGLE:20 DEGREES, DIMENSION :58X14 MM, WARRANTY:5 YEARS, SWITCH GEAR:DIMMABLE, INPUT VOLTAGE: 165V-265V, SURGE PROTECTION: INCLUDED IES FILES: AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
12
-
2727
Supply, installation, commissiong and testing of MODEL:IN GROUND 3 WAY LIGHT, Power:3 WATTS(1WX3), Material:ALUMINIUM DIE CAST,IP RATING:IP65, CHIPSET:CREE, CTC:3000K, BIN:02, LUMEN O/P:70 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE:105 DEGREES, DIMENSION :84X90 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ; Bajaj/Crompton/Wipro/Havells
90
-
3977
Supply, installation, commissiong and testing of MODEL:IN GROUND 2 WAY LIGHT, Power:2 WATTS (1WX2), Material:ALUMINIUM DIE CAST, IP RATING: IP65 CHIPSET:CREE, CTC:3000KBIN:02 LUMEN O/P:70 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE:105 DEGREES, DIMENSION :84X90 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE: 165V-265V, SURGE PROTECTION: INCLUDED, IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
12
-
3977
Supply, installation, commissiong and testing of MODEL:ADJUSTABLE BOLLARD, Power:6 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:CREE, CTC:3000K, BIN:02, LUMEN O/P:433 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE:117 DEGREES, DIMENSION :160X54X300 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION: INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ; Bajaj/Crompton/Wipro/Havells
25
-
6590
Supply, installation, commissiong and testing of MODEL:AURA OR ECLIPSE WALL LIGHT, Power:10 WATTS Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:OSRAM, CTC:3000K, BIN:02, LUMEN O/P:567 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : WHITE, POWER FACTOR:0.97, BEAM ANGLE:360 DEGREES , DIMENSION :240X48 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION: INCLUDED IES FILES:AVAILABLE the rates are including transportation and labour charges for finished item of work. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
20
-
8862
Supply, installation, commissiong and testing of MODEL:ADJUSTABLE WALL LIGHT, Power:6 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP65, CHIPSET:OSRAM, CTC:3000K, BIN:02, LUMEN O/P:632 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE: 100 DEGREES, DIMENSION :160X62 MM, WARRANTY:5 YEARS, SWITCH GEAR: ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION:INCLUDED IES FILES: AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
4
-
7442
Supply, installation, commissiong and testing of MODEL:4FT LONG WALLWASHER , Power:32 WATTS, Material:ALUMINIUM DIE CAST, IP RATING:IP66, CHIPSET:OSRAM, CTC:3000K OR RGB, BIN:02, LUMEN O/P:3060 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : GREY, POWER FACTOR:0.97, BEAM ANGLE: 25 DEGREES, DIMENSION :1000X40X83 MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF(WITH DMX SUPPORT), INPUT VOLTAGE:165V-265V, SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
25
-
27268
Supply, installation, commissiong and testing of MODEL:NARROW BEAM FOOT LAMP, Power:3 WATTS, Material:ALUMINIUM DIE CAST,IP RATING: IP54 , CHIPSET:OSRAM, CTC:3000K, BIN:02, LUMEN O/P:240 LUMENS, DRIVER:IP 65 DRIVER , COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE: 10 DEGREES, DIMENSION :1000X40X83 MM, WARRANTY:5 YEARS , SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
30
-
4772
Supply, installation, commissiong and testing of MODEL: PATTERN EMITTING BOLLARD, Power:10 WATTS Material:ALUMINIUM DIE CAST, IP RATING: IP65, CHIPSET:CREE, CTC:3000K, BIN:02 LUMEN O/P:540 LUMENS, DRIVER:IP 65 DRIVER, COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE: 44 DEGREES, DIMENSION :110X600H MM, WARRANTY:5 YEARS SWITCH GEAR:ON/OFF INPUT VOLTAGE:165V-265V SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
5
-
17042
Supply, installation, commissiong and testing of MODEL: PATTERN EMITTING DESIGNER LIGHT, Power:20 WATTS, Material:ALUMINIUM DIE CAST,IP RATING:IP65, CHIPSET:CREE, CTC:3000K, BIN:02,d, LUMEN O/P:1000 LUMENS, DRIVER:IP 65 DRIVER COLOUR : DARK GREY, POWER FACTOR:0.97, BEAM ANGLE: 360 DEGREES, DIMENSION :CUSTOMISED, WARRANTY:5 YEARS SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V SURGE PROTECTION:INCLUDED IES FILES: AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
5
-
68169
Supply, installation, commissiong and testing of MODEL: OUTDOOR FLEXI STRIP, Power:15 WATTS/METER (60X0.25W), IP RATING:IP65,CHIPSET: EPI STAR,CTC:3000K, BIN:02, LUMEN O/P:1400 LUMENS, DRIVER:IP 65 DRIVER, BEAM ANGLE: 120 DEGREES, DIMENSION :10MM, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:12V, SURGE PROTECTION:INCLUDED IES FILES:AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
1065
-
557
Supply, installation, commissiong and testing of MODEL: OUTDOOR POWERSUPPLY, Power:5 AMPS, IP RATING:IP65, DRIVER:IP 65 DRIVER, COLOUR : ALUMINIUM, DIMENSION :200X58X37, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, OUTPUT:12V DC. SURGE PROTECTION: INCLUDED ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ;Bajaj/ Crompton/ Wipro/ Havells
50
-
2159
Supply, installation, commissiong and testing of MODEL: OUTDOOR POWERSUPPLY, Power:16 AMPS, IP RATING:IP65, DRIVER:IP 65 DRIVER, COLOUR : ALUMINIUM,DIMENSION: 200X58X37 WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:165V-265V, OUTPUT:12V DC. SURGE PROTECTION: INCLUDED, IES FILES: AVAILABLE ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes ; Bajaj/Crompton/Wipro/Havells
50
-
6022
Supply, installation, commissiong and testing of MODEL: OUTDOOR PROFILE POWER SUPPLY , Power:12watts, IP RATING:IP65, COLOUR : ALUMINIUM, DIMENSION :CUSTOMISED, WARRANTY: 5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE:24V, SURGE PROTECTION: INCLUDED ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ; Bajaj/Crompton/ Wipro /Havells
90
-
3636
Supply, installation, commissiong and testing of MODEL: OUTDOOR POWERSUPPLY, Power: 8 AMPS, IP RATING:IP65,DRIVER: IP 65 DRIVER COLOUR : ALUMINIUM, DIMENSION :200X58X37, WARRANTY:5 YEARS, SWITCH GEAR:ON/OFF, INPUT VOLTAGE: 165V-265V, OUTPUT:24V DC, SURGE, PROTECTION: INCLUDED. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes ; Bajaj/Crompton/Wipro/Havells
8
-
4772
Supply and fixing of suitable Main feeder pillar box made with 14 SWG CRCA sheet including S & F of Legrand / Schneider / Siemens / ABB / L&T make 63A TP MCB, 8 Nos 25A TP MCB's. din channel, 6 Sqmm 4 core copper cable from Main feeder pillar box to feeder pillar box of each pole, connectors and provision for energy meter etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/Legrand/ABB/Schneider
2
-
35546
Supply and fixing of 300X150X170mm size thermo plastic junction box for individual street light pole including supply and fixing of suitable size SP MCB's. din channel, 6 Sqmm 3 core copper cable for individual light control, connectors etc., complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Hensel/Sintex.
100
-
1420
supply and fixing of Cable route indicators along the cable trench for every 3M ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
105
Supply, laying & commissioning of following size1.1KV grade XLPE insulated armored Aluminum conductor under ground cable, including excavation of earth, providing protection with sand and bricks on top & sides and providing cable route markers at every 30m interval.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : Torrent/Universal/polycab/Havells/KEI
-
-
-
4C x 6sq.mm
2000
-
153
4C x 4sq.mm
850
-
178
Providing end terminations for following size cables including supply of Compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SMI / Commet / Dowels/Jaison.
-
-
-
4C x 6sq.mm
90
-
223
4core 4Sq.mm cable
100
-
223
Supply and installation of NIMBUS CPT-3/NLP 2200 / FOREND(ESE-EU) Advanced lighting protection with capturing head of 135-210mm diameter, 205-580mm height and 4.60-4.940 kgs, and having Rod length 760mm, weight 1.795 kgs with stainless steel rod, working on the principle of (ESE) Early Streamer Emission technology, having a coverage radius of 79mtrs when mounted on 10-15mtrs height of existing lattice tower giving level 1 protection and anticipation emission time of 60 micro seconds/72 micro seconds. The NIMBUS is manufactured according to standard NFC 17 102 and UNE 21186-96 including functional integrity etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : NIMBUS / FOREND/ EARTHPLUS
2
-
129909
Supply ,Installation and commissioning of NIMBUS / FOREND or equivalent advanced lighting protection systems which includes 1. Laying of CC Bed 2.Installation of Lighting Rod 3.Laying of Down conductor 4.Installation of Counter 5.Installation of Earth Electrodes 6.Interconnection between the Electrodes 7.Termination of down conductor to earth bus etc complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
33564
Supply and erection of electro-Mechanical counter Makes: NIMBUS / FOREND/ EARTHPLUS ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
17309
Providing earth electrode of low carbon steel rod of 17mm dia, coated with 250 microns thick copper 3mtr long with clamps and 2 bags of LORESCO ZEROLITE back fill compound etc complete with construction of brick masonary of size 300mm x 300mm chamber with cover for maintenance free earthing. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
12484
Supply and laying of down conductor of 1x70sq.mm single core PVC insulated unarmoured copper conductor cable of ISI mark. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: Polycab / Havells / RPG / RR Kabel
750
-
788
Supply and laying of 32 X 6mm GI Strip size earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid on the parapet with necessary interconnections with earth station and equipments. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2200
-
133
Supply,installation, testing and commissioning of Earth Mat conductor with 25mm dia MS rods in ground as per the drawing at 300mm below ground level in a grid of 1000X1000mm including cutting, welding with 75X5mm MS strip at junctions etc as required. Including Back filling fine soil /clay without stone or cement material (refer earth mat drawing). ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
900
-
12246
supply and laying of 25 X 3mm Copper strip with DMC Insulated Supports from earth pit/mat/panels to required place as per the instructions of engineer in charge ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
400
-
475
supply and laying of 25X6mm Copper Strip with insulating sleave laid in Ground from earth pit/mat/panels to required place as per the instructions of engineer in charge ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
926
supply and laying of 50 X 6 mm GI Strip for extension from the earth mat from earth pit/mat/panels to required place as per the instructions of engineer in charge ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
197
supply and laying of 100X6mm GI strip from earth pit/mat/panels to required place as per the instructions of engineer in charge ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2500
-
371
VENTILATION PANEL Incoming : 630A 50KA TPN MCCB with Microprocessor based inbuilt display with overload,Shortcircuit, neutral protection , Earth fault & Earth leakage releases – 2sets, Bus bars :630A TPN Aluminium Bus bar – 1Set, Outgoings : 125A 25KA TPN MCCBs – 8Nos Metering :i) 0 – 500V Voltmeter with Selector switch – 2sets, ii) 0-630A Ammeter with cast resin CTs and selector switch-1sets iii) CT operated Multifunction Meter with RS 485 connectivity-1set (iv) LED type Phase indication lamps with individual MCB control and toggle switches – 2sets ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes for Switchgear & Overload relay:L & T / SIEMENS /SCHNEIDER. Makes for Digital Meter:circutor / conserv ( schneider) / elmeasure / electrex.makes of capacitor all pp / heavy duty mpp:universal / meher / schneider / neptune/l&t, makes for control switches: kaycee/gec/alstom /salzer.makes for push buttons & indication lamps:technic / vasihno /schneider.makes for bus bar trunking:schneider / l & t / power bar / c&s.makes for bus bar supports:powermat / approved equivalent.
1
-
349752
VENTILATION PANEL-1,2 &3 (Basement-2) as per IEC 61439 (PTTA), The Panel shall be provided with PLC with suitable Inputs/ outputs, power supply, Relays and fully wired in Auto mode including software and other accessories. The PLC shall also be wired to CO sensors for operation as per specifications, Incoming : 125A 25KA TPN MCCB with Thermal Magnetic releases for S/C.O/C, E/F - 1no.,Bus bars : 125A TPN Aluminium Bus bars – 1Set, Outgoings: ,63A 16KA TP MCB for 7.5kw Exhaust blower – 2Nos, 40A 10KA TP MCB for 5.5kw Exhaust blower – 1No, Suitable rating MPCB with Dual speed Controller suitable for 1.1KW Impulse fan Motor along with PLC for control of impulse fans based on co level - 8 Nos . Metering :i) 0-500V Digital Voltmeter with Selector switch -1set, ii) 0-125A Digital Ammeter with Resin cast Cts and selector switch-1 set, iii) CT operated Multifunction Meter with RS 485 connectivity-1set, iv) LED type Phase indication lamps with individual MCB control and toggle switches – 1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes for Switchgear & Overload relay:L&T / SIEMENS /SCHNEIDER/ABB/C&S/Legrand. Makes for Digital Meter:circutor / conserv ( schneider) / elmeasure / electrex.makes of capacitor all pp / heavy duty mpp:universal / meher / schneider / neptune/l&t, makes for control switches: kaycee/gec/alstom /salzer.makes for push buttons & indication lamps:technic / vasihno /schneider. makes for bus bar trunking:schneider / l & t / power bar / legrand/ABB/ C&S.makes for bus bar supports:powermat / approved equivalent.
3
-
229820
VENTILATION PANEL-1 & 2 (Basement-1) as per IEC 61439 (PTTA),, The Panel shall be provided with PLC with suitable Inputs/ outputs, power supply, Relays and fully wired in Auto mode including software and other accessories. The PLC shall also be wired to CO sensors for operation as per specifications Incoming : 125A 25KA TPN MCCB with Thermal Magnetic releases for S/C.O/C, E/F - 1no.Bus bars : 125A TPN Aluminium Bus bars – 1Set Outgoings: 63A 16KA TP MCB for 7.5kw Exhaust blower – 2Nos 40A 10KA TP MCB for 5.5kw Exhaust blower – 1No,Suitable rating MPCB with Dual speed Controller suitable for 1.1KW Impulse fan Motor along with PLC for control of impulse fans based on co level - 8 Nos . Metering :,i) 0-500V Digital Voltmeter with Selector switch -1set,ii) 0-125A Digital Ammeter with Resin cast Cts and selector switch-1 set,iii) CT operated Multifunction Meter with RS 485 connectivity-1set iv) LED type Phase indication lamps with individual MCB control and toggle switches – 1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes for Switchgear & Overload relay: L&T / SIEMENS /SCHNEIDER/ ABB/C&S Makes for Digital Meter:circutor/conserv ( schneider) / elmeasure / electrex. makes of capacitor all pp / heavy duty mpp:universal / meher / schneider / neptune/ L&T, makes for control switches: kaycee/gec/alstom /salzer.makes for push buttons & indication lamps:technic / vasihno /schneider.makes for bus bar trunking:schneider / l & t / power bar / c&s.makes for bus bar supports:powermat / approved equivalent.
2
-
147700
Supply, Installation,Testing and Commissioning of the following cubicle type front operated ,sheet steel wall mounted control panels with Al. bus bar suitable rating aluminium @0.8A/Sq.mm including anchoring into the wall. These panels shall be complete in all respects as per the drawings and the specifications. (Vendor shall cross check and make sure the co-relation of the specified panel ratings here to suit the respective fan motor capacities)The panel shall include the following accessories :MCCB /MPCB as per rating given below. Terminal block for power distribution. Single Phase Preventor with indication. Phase indicating lights and indicating lights for ON/OFF/TRIP status Digital type Ammeter and suitable size resin cast CT and selector switch. Time delay relay for automatic restart of Fan motors.Auto/Manual selector switch shall be provided in each Panel. The same should provided with potential free contact for position monitoring/ Operation to BMS system., All starters shall have suitable potential free contacts, Wiring for micro switch for stopping the fan when fire dampers closes.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Siemens/L&T/Legrand/Schneider/ABBThe number of Blower panel shall be as detailed below :
-
-
-
MPCB With Contactor suitable for 5.5kw -1No
5
-
24916
MPCB With Contactor suitable for 5.5kw -2No
1
-
24916
MV CABLES
-
-
-
Supply,laying dressing and clamping of 1.1KV grade, PVC insulated Aluminium/Copper conductor armoured Underground cables including all fixing accessories such as clamps for fixing the cable or laid in ground including excavation and refilling of earth and providing protection with sand and bricks as per drawing.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Polycab / Havells / KEI /RR Kabel
-
-
-
3.5 core 50Sq.mm Al.XLPE Cable
300
-
378
3.5 core 35Sq.mm Al.XLPE Cable
500
-
286
4C X 16 Sq.mm Copper.
500
-
844
4C X 10 Sq.mm Copper.
300
-
527
4C X 6 Sq.mm copper
300
-
342
4C X 4 Sq.mm copper
300
-
243
2Cx1.5sq.mm ( Control Cable for CO Sensors)
1800
-
80
6Cx1.5sq.mm ( Power Cable for Jet Fans)
3500
-
183
2Cx1.5sq.mm ( Power Cable for acctuaters)
1000
-
80
Providing end terminations for following size cables including supply of Double Compression type cable gland, lugs, insulation tape and identification tags complete with end termination and earthing of gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes-Dowels/SMI/Commet
-
-
-
3.5 core 50Sq.mm Al .XLPE Cable
12
-
505
3.5 core 35Sq.mm Al. XLPE Cable
6
-
410
4C X 16 Sq.mm copper
20
-
346
4C X 10 Sq.mm Copper.
24
-
314
4C X 6 Sq.mm copper
4
-
223
4C X 4 Sq.mm copper
4
-
147
2Cx1.5sq.mm
60
-
37
6Cx1.5sq.mm
120
-
92
2Cx1.5sq.mm
48
-
37
Supply, installation, testing and commissioning of Motor Panel with the following items : Incoming : 63A 16KA TP MCCB with shunt trip coil along with thermal-magnetic release for over-current and short-circuit protection & Earth leakage relay (300mA - 3000mA) with resin cast CBCT – 1setBus bars : 63A, 16kA/1sec TPN Aluminium - 1Set, Outgoings : MPCB with DOL starters with L/R selector switch, remote control for 6.0HP – 3Nos, MPCB with DOL starters with L/R selector switch, remote control for 3.0HP – 5NosMPCB with DOL starters with L/R selector switch, remote control for 1.5HP – 2Nos Water Level Controllers – 4Nos, DOL starters with MPCBs (spares) - 2Nos Metering : i) 0 - 500V Voltmeter with Selector switch – 1set ii) CTs 60/5A 15VA CL 1.0, 0-60A Digital Ammeter with selector switch – 1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set. The rates are inclusive of material and labour etc for finished item of work as per the latest IS specifications.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : L&T/Legrand/C&S/ABB/Siemens/Schneider
1
-
345344
HVAC Internal
-
-
-
Supply, installation, testing and commissioning of weather proof cabinet type centrifugal fans as per the specifications. The fans should be AMCA certified for air performance & sound ratings. Fan Efficiency shall not be less than 60%. Fan & fan motor should be suitable for operation at 300 deg C for 2 hours during fire operation.28500 CFM for Staircase pressurisation (25mm Total Static Pressure). Maximum sound power level at source (LWA)-80 DBA.The rates are all inclusive of all required accessories and giving connections as per the requirement ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
484294
Cabinet Fans : Supply, installation, testing and commissioning of factory fabricated weather prrof Single Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-plasticized/ pre-coated Galvanised steel sheet with blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, complete with motor and belt drive package . The blower should be AMCA Certified for air performance and sound rating. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient.The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum. The rates are all inclusive of all required accessories and giving connections ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
5200 CFM (40mm Total Static Pressure)
1
-
68769
6000 CFM (40mm Total Static Pressure) Toilet Exhaust booster fan
2
-
68770
8000 CFM (40mm Total Static Pressure) Toilet Exhaust booster fan
2
-
81249
8000 CFM (75mm Total Static Pressure) STP Exhaust fan
1
-
104284
6000 CFM (75mm Total Static Pressure) STP Fresh air fan
1
-
81249
Inline Fan : Supplying, installing, testing and commissioning of duct inline fans for exhaust air complete with centrifugal / radial fan , drive and drive package . The noise level of the fan shall not exceed 40dBA . The unit shall be fitted with speed regulator of suitable ratings. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
600 CFM for toilet Exhaust (15mm Total Static Pressure)
24
-
9271
700 CFM for toilet Exhaust (15mm Total Static Pressure)
18
-
9879
Supply, installation, balancing and commissioning of factory fabricated GI sheet metal rectangular/Oval ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Thickness 0.63 mm sheet ( slip joint)
725
-
892
Thickness 0.80 mm sheet (TDF joint)
550
-
1075
Thickness 1.00 mm sheet (TDF joint)
200
-
1222
Thickness 1.25 mm sheet (TDF joint)
100
-
1250
Supplying, installing, testing and commissioning of Back Draft damper having 18 gauge G.I. frame and 20 gauge louvers at exhaust air fans complete as per specification & drawings. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Ravi Star/Air mastar/Sagar air
50
-
6721
Supply, installation, testing and commissioning of GI volume control duct damper 150mm wide 18 Guage GI Casing and 20 Guage louvers complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Ravi Star/Air mastar/Sagar air
120
-
10044
Supplying & fixing of powder coated extruded aluminium Supply/ Exhaust Air Grills with aluminium volume control dampers,flanges and gasket as per specifications.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
9233
Supply, installation, testing & commissioning of 150mm dia Aluminum powder coated Exhaust air valves of approved color for finished item of work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
480
-
695
Supply, installation, testing & commissioning of 150mm dia uninsulated flexible ducts complete with necessary clamps &supports for finished item of work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
481
-
60
CAR PARK VENTILATION SYSTEM
-
-
-
VFD: Supply, installation, testing & commissioning of smoke spill Axial fans for the following capacities complete with TEFC motor,mounting bracket, Gravity louver, 900 mm long silencers at inlet with all supports, etc. The fan and motor shall be suitable for VFD operation. The fans shall be installed with spring vibration isolator or cushy foot mounting as to avoid transmission of vibration. The fan and motor shall be suitable for smoke evacuation and shall be rated for 250 Deg C for 2 hours fire with stand capacity with casing made of GI Sheet, motor, with impeller (Hub and blades) shall be constructed of die cast aluminum alloy. Impeller should have aerodynamic profile, Casing made of Galvanized steel. Direction of discharge and rotation position shall be as per the job requirement Please refer technical specification for further data.The noise level of the fans at rated speed shall not exceed 70dBA at 1m distance with inlet. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
35000 CFM for Basement-2 exhaust (25 mm Total Static Pressure). Maximum sound power level at source (LWA) -80 DBA.
6
-
259374
35000 CFM for Basement-1 exhaust (25 mm Total Static Pressure). Maximum sound power level at source (LWA) -80 DBA.
4
-
259374
25000 CFM for Basement-2 Fresh air fan (25 mm Total Static Pressure). Maximum sound power level at source (LWA) -80 DBA.
3
-
175070
20000 CFM for Basement-1 Fresh air fan (25 mm Total Static Pressure). Maximum sound power level at source (LWA) -80 DBA.
2
-
151501
Supply, Installation, Testing and Commissioning of Induction 350dia JET VENT fans with motor (suitable for 300 Deg C for 2 Hours, 2 silencers, 2 bird screen, 1 bell mouth, mounting legs 2 Nos and fixing bolts for finished item of work, ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
32448
Conducting the CFD ( Computerized Fluid Dynamic analysis) and submission of Reports and adjusting the Location of Fans ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
171541
Supply installation testing and Commissioning of Carbon Monoxide Detector sensing range upto 0-250ppm and at and more than 30ppm the fan will starts working as per the specifications ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
18
-
12390
Supply, installation, balancing and commissioning of factory fabricated GI sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Thickness 0.63 mm sheet ( slip joint)
10
-
892
Thickness 0.80 mm sheet (TDF joint)
10
-
1075
Thickness 1.00 mm sheet (TDF joint)
10
-
1222
Thickness 1.25 mm sheet (TDF joint)
350
-
1250
AIR MOVING EQUIPMENTS
-
-
-
Supply, installation, testing and commissioning of Cabinet type Double skin (25 mm insulation) AHU / CSU complete with pre filter, chilled water cooling coil, Forward curved fan, EFF-1 motor and drive package for fan, canvas at unit outlet, outlet damper, vibration isolators, Limit switch, Wiring to the interlock of the AHU inspection door, marine light and motorised valve to be included. All the CSU's should be as per the details furnished in equipment schedule.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Male-H-Tech/ZECO/ VAYHAN/Caryaire/carrier
-
-
-
25.8 TR/12500 CFM/ 85 MMWG STATIC FOR GF
2
-
498202
19.2 TR/10200 CFM/ 70 MMWG STATIC FOR 1F Floor
2
-
411286
25.0 TR/12600 CFM/ 80 MMWG STATIC FOR 2nd Floor
2
-
498202
84 TR/42000 CFM / 85 MMWG STATIC FOR 3rd Floor
2
-
1698544
75 TR/36940 CFM / 85 MMWG STATIC FOR 4th Floor
2
-
1469610
38.2 TR /12400 CFM/ 80 MMWG STATIC FOR 5th floor
2
-
498202
19.5 TR/8500 CFM/ 70 MMWG STATIC FOR 5th floor
2
-
349366
Supply, Installation, testing & commissioning of HVAC dedicated VFDs suitable for the following AHU fan motor capacity (The integration of the VFD with AHU is included in this item) with ( VFD IN IP 55 CONSTRUCTION, WITH C1 TYPE FILTER ) - Connectable/interface with the BMS system in LONWORKS/ MODBUS protocol , also 4 nos. potential free contacts(for run,trip & auto/ mannual) & 1 no. of relay contact for on/off command. complying with the tender specifications and having:Three-feedback PID (Propotional integrated derivative) controller having capability to simultaneously accept 3 feedback signals from temperature sensors or pressure sensors for process optimization and accordingly regulate the speed of the AHUs & TFA. (item includes the cost of temprature sensor and pressure sensor etc as reqd) Additional 3 PID controllers to control external devices such as fresh air damper, etc. thus reducing the number of I/Os in DDC Controllers & improving system reliability, VLD-362. The co-ordination of the installation and integration of the VFDs. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. The capacity of the motors operated by the VFD are as follows.
-
-
-
Air Quantity ESP TR Motor KW
-
-
-
42500 CFM 85 MMWG 84 TR 30 KW
2
-
1619582
36940 CFM 85 MMWG 75 TR 22 Kw
2
-
1312651
12400 CFM 85 MMWG 38.2 TR 7.5 Kw
2
-
472070
12500CFM 85 MMWG 25.8 TR 7.5 Kw
2
-
472070
12600CFM 85 MMWG 25 TR 7.5 Kw
2
-
472070
10200CFM 85 MMWG 19.2 TR 5.5 Kw
2
-
360728
8500 CFM 85 MMWG 19 TR 5.5 Kw
2
-
301648
Supply, installation, testing and commissioning of Cabinet type Double skin Treated Fresh Air floor mounted unit (25 mm insulation) complete with vibration pads,RCC base, pre filter, 8 row chilled cooling coil, Forward curved fan, EFF-1 motor and drive package for fan, canvas at unit outlet, outlet damper, vibration isolators, Limit switch, Wiring to the interlock of the AHU inspection door, marine light and motorised valve to be included. All the CSU's should be as per the details furnished in equipment schedule including transportation charges and labour charges for installation charges etc., complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-H-Tech/ZECO/VAYHAN
-
-
-
28 TR / 5700 CFM / 85 MMWG STATIC FOR GRD, 1ST, 2ND & 3RD floor
1
-
232911
33 TR / 6600 CFM / 70 MMWG STATIC FOR 4TH & 5TH floor
1
-
267563
Supply, installation, testing and commissioning of Floor Mounted Precision air handling unit for server room complete with filter 95% down to 5 micron, hydrophilic coated multi row coil, EC fan motor, humidification, heating arrangement Insulated stainless steel condensate drain tray. The unit offered shall be with standalone microprocessor controller and other accessories & safety features for automatic operation of the system and should be compatible for integration to any open protocol BMS of any make.The unit shall be selected for cold aisle temp at 22±2° C deg C, 50+/-5% RH. It shall be complete with BMS converter and Sequential Controller. All unit shall be in built master controller. Unit should have supply sensor also to control the supply air temperature irrespective of the return air temp. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:York/Stulz/Liebert/clamavenata
-
-
-
10.0 TR
4
-
681690
8.0 TR
2
-
568075
Supply, installation, testing and commissioning of wall mounted Hi Wall Unit with prefitted 2-way valve station, temperature controller with remote, fan, fan motor, cooling coil, drain pan, prefilters and complete in all respects of below capacities. (ups , hub, and elect room). ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Blue Star/Voltas/Carrier/Daikin
-
-
-
1.0 TR
24
-
27836
Exhaust Air Fan section
-
-
-
Supply, installation, testing and commissioning of ducted inline type exhaust fans complete with motor, fan ,exhaust Louvers of following sizes for Toilet Exhaust including transportation charges, labour charges for installation charges etc., complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make- Kruger/Nicotra/System air/Caryaire.
-
-
-
550 CFM, 25 MM STATIC
6
-
9657
600 CFM, 25 MM STATIC
6
-
10793
650 CFM, 25 MM STATIC
6
-
11930
CHILLED WATER PIPING
-
-
-
Supply, installation, testing and commissioning of "C"class mild steel Chilled water piping with all necessary fittings like flanges supports,bends, tees,reducers,sockets & 19mm thick elastomeric nitrile rubber foam insulation & 28 guage Al.cladding including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Jindal/Tata
-
-
-
80 mm dia
150
-
3288
65 mm dia
700
-
2840
Chilled Water Circuit Valves :
-
-
-
Supply, installation, testing and commissioning of following type of valves for the chilled/hot water circuit with all fittings and elastometric nitrile rubber foam insulations of density 48-60 Kg/m3 and 28 guage Al.cladding including transportation charges, labour charges for installation charges etc., complete. The rates are inclusive of all items and its acessories etc for finished item and the work should be carried out as per the specifications and directions of Engineer-in-charge Make-Advance/Sant/Audco/kirl;oskar/zolotto
-
-
-
Supply, installation, testing and commissioning of following type of valves for the chilled/hot water circuit with all fittings and elastometric nitrile rubber foam insulations of density 48-60 Kg/m3 and 28 guage Al.cladding including transportation charges, labour charges for installation charges etc., complete. Make-Advance/Sant/Audco/kirl;oskar/zolottoPN16 water type Butterfly Valves center disc type with slim seal, CI body and all PVC wetted parts including position indicator, matching flanges, gaskets and fasteners.The rates are inclusive of all items and its acessories etc for finished item ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Advance/Sant/Audco/kirl;oskar/zolotto
-
-
-
100 mm dia.
8
-
5056
80 mm dia.
4
-
4601
Supply, installation, testing and commissioning of following type of valves for the chilled/hot water circuit with all fittings and elastometric nitrile rubber foam insulations of density 48-60 Kg/m3 and 28 guage Al.cladding including transportation charges, labour charges for installation charges etc., complete. Make-Advance/Sant/Audco/kirl;oskar/zolottoPN16 water type Butterfly Valves center disc type with slim seal, CI body and all PVC wetted parts including position indicator, matching flanges, gaskets and fasteners.The rates are inclusive of all items and its acessories etc for finished item ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Advance/Sant/Audco/kirl;oskar/zolotto 65 mm dia.
12
-
5113
Balancing Valves- PN 16, with flow measurement accessories including position indicator, matching flanges, gaskets and fasteners.The rates are inclusive of all items and its acessories etc for finished item ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Advance/Sant/Audco/kirloskar/zolotto
-
-
-
100 mm dia.
1
-
8521
80 mm dia.
3
-
6249
65 mm dia.
5
-
5113
PN 16 Y-Strainers with CI body and brass filter including matching flanges, gaskets and fasteners.The rates are inclusive of all items and its acessories etc for finished item ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Rapidco/Emarald/sant
-
-
-
100 mm dia.
4
-
6476
80 mm dia.
3
-
4545
65 mm dia.
5
-
4545
Supply, installation, testing and commissioning 2-way motorized valves of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Make-Honeywell/Siemens/ Johnson Control)
-
-
-
100 mm dia.
4
-
39765
80 mm dia.
3
-
25563
65 mm dia.
5
-
21019
Supply, installation, testing and commissioning of Air Vents 15 mm dia.including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make-Anergy/RB)
-
-
-
15 mm dia.
24
-
1363
Supply, installation, testing and commissioning of following Thermometers and pressure guage for the condenser water circuit complete with syphon and fitttings including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Waree/Forbes Marshall/Burner.
-
-
-
Supply, installation, testing and commissioning of following Thermometers and pressure guage for the condenser water circuit complete with syphon and fitttings including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Waree/Forbes Marshall/Burner. 100mm dia type Pressure guage with stainless steel body- IP55 Protection with necessary syphon, cock & needle valve.Range-0-10 Kg/Sq.CM ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
24
-
2840
Supply, installation, testing and commissioning of following Thermometers and pressure guage for the condenser water circuit complete with syphon and fitttings including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Waree/Forbes Marshall/Burner. Dial type IndustrialThermometer with stainless steel body- IP55 Protection.Range-0-50 degree Centigrade) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
24
-
2840
Supply, installation, testing and commissioning of "B" class GI drain piping complete with fitting etc & nitrile foam insulation with sealing tapes & 28 G Aluminium cladding complete including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.. Make-Jindal/Tata/Surya)
-
-
-
Supply, installation, testing and commissioning of "B" class GI drain piping complete with fitting etc & nitrile foam insulation with sealing tapes & 28 G Aluminium cladding complete including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.. Make-Jindal/Tata/Surya) 32 mm dia
180
-
2272
Supply, installation, testing and commissioning of "B" class GI drain piping complete with fitting etc & nitrile foam insulation with sealing tapes & 28 G Aluminium cladding complete including transportation charges, labour charges for installation charges etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.. Make-Jindal/Tata/Surya) 40 mm dia
100
-
2045
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct
-
-
-
Make: GP Sprial / Spiral Tubes / Dev Duct
-
-
-
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct Make: GP Sprial / Spiral Tubes / Dev Duct 24G , Duct Width 0 - 600 mm
3000
-
1477
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct Make: GP Sprial / Spiral Tubes / Dev Duct 22G , Duct Width 601 - 1200 mm
2000
-
1591
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct Make: GP Sprial / Spiral Tubes / Dev Duct 20G , Duct Width 1201 - 1750 mm
400
-
1704
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct Make: GP Sprial / Spiral Tubes / Dev Duct 18G , Duct Width 1751 - 2500 mm
250
-
1988
Supply, installation, testing and commissioning of CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct Make: GP Sprial / Spiral Tubes / Dev Duct 16G , Duct Width 2501 & Above
550
-
2386
Supply, Installation, Testing and Commissioning of insulated flexible ducts. The insulated flexible duct shall have inner core made of double lamination of metalized polyster film permenantly bonded to a coated spring steel wire helix. (eed to put size) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Airflow/pyroguard
-
-
-
Supply, Installation, Testing and Commissioning of insulated flexible ducts. The insulated flexible duct shall have inner core made of double lamination of metalized polyster film permenantly bonded to a coated spring steel wire helix. (eed to put size) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Airflow/pyroguard Insulated Flexible ducts of 100 mm dia
50
-
738
Supply, Installation, Testing and Commissioning of insulated flexible ducts. The insulated flexible duct shall have inner core made of double lamination of metalized polyster film permenantly bonded to a coated spring steel wire helix. (eed to put size) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Airflow/pyroguard Insulated Flexible ducts of 150 mm dia
10
-
852
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium opposed blade collar dampers with thickness 18 SWG suitable for supply air duct. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
14259
Supplying & fixing of powder coated extruded aluminium Return Air Grills but without collar dampers complete as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
8294
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium opposed blade collar dampers with manually lever operated anti smudge ring & removable core.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
11191
Supply, installation and adjusting of disc valves suitable for exhausting toilet foul air ,comprising of an adjustable centre cone and coupling sleeve made of Aluminum sheet duly epoxy painted with approved color. The disc valve shall be fitted with a galvanised steel installation frame and the sleeve shall incorporate a foam-rubber gasket for airtight sealing. The centre cone should be adjustable for balancing and with a locking arrangement to maintain the desired flow rate. The disc valve should be aluminium powder coated.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
150 mm dia
209
-
966
Door Louvers : Supply, installation and adjusting of Non Vision transfer grilles in extruded aluminium comprising of a non vision door grille on one side and complete with sliding frame on the opposing side. The assemble shall be suitable for the door thickness as per site conditions. The color shall match the interior requirements.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
800x400
18
-
2840
Supply, installation, testing and commissioning of Motorised Volume Control Damper complete with actuator positional signal voltage 0-10V dc, positional force 10N-m, 18 Guage GI Casing 150mm wide, louvers 20Guage ,control panel, inter connecting wiring at locations shown and as per specifications & control logic. (FOR AHU SUPPLY ) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Ravi Star/Air mastar/Sagar air
30
-
23291
Supply, installation, testing and commissioning of Motorised Fire Damper complete with actuator positional signal voltage 0-10V dc, positional force 10N-m, 18 Guage GI Casing 150mm wide, louvers 20Guage ,control panel, inter connecting wiring at locations shown and as per specifications & control logic. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Ravi Star/Air mastar/Sagar air
18
-
13634
Supply, Assembly, Installation, Testing, Balancing & Commissioining of VAV boxes SA duct constructed of 22 G GI sheet with Interior acoustic lining of Open Cell Armasound /K-Fonic Nitrile Rubber /Foam acoustic insulation- with Thermal conductivity 0.045 W/m deg.K / density 140~180 kg/m3. A flat oval damper with elliptical shape should have proper sealing & good linearity. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
5000 ~5500 CFM
3
-
59648
4500 ~5000 CFM
2
-
57376
4000 ~4500 CFM
2
-
56239
3500 ~4000 CFM
1
-
53967
2500~2800 CFM
5
-
51695
2000~2500 CFM
10
-
48286
1500~2000 CFM
8
-
43742
1000~1500CFM
5
-
39765
500~800 CFM
9
-
34653
300~500 CFM
30
-
25620
200~300 CFM
2
-
21019
Supply, fabrication & installation of Factory fabricated double canvass (fire retardant) flexible connection as per drawings & specifications.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
24
-
2784
Supply, installation, testing and commissioning of Thermal insulation of ducting with 9/10 mm thick, 40-60 Kg / M3 density, class 'O' rated nitrile rubber faced with Aluminum foil 80 µ thickness,stuck to the cleaned external duct surface with synthetic rubber low VOC content ahdhesive of Pidlite industries or equivalent and to be used for tail end insulation of ducting. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-K-flex/A-flex/Armaflex.
5000
-
642
Supply, installation, testing and commissioning of Accoustic Insulation of ducting with 15mm thick open cell nitrile rubber insulation of class-1 accoustic 140-180 Kg / M3 density stuck to the clean internal surface of the duct with good quality low VOC content adhesive of Pidlite industries or equivalent. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-K-flex/A-flex/Armaflex.
5000
-
2840
Roof Insulation of specified 50 mm thickness TF Quality EPS slab with 20 Kg/M3 density.The underdeck insulation should be carried out with one coat of Primer and with hot bitumen.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
800
-
807
Supply, installation, testing and commissioning of Sound Attenuator with the casing from galvanised steel sheets of 20 /22 swg and incorporate high density and highly absorbant Fibre glass insulation material with Fibre glass tissue covering with 26 swg perforated aluminium sheet. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
32948
Supply, installation & testing commissioning of Factory assembled Microprocessor based Aircooled Semi hermetically sealed Twin circuit screw Chillers of nominal Capacity 350 TR at AHRI Condition. The operating refrigerant shall be R134a eco-friendly. The unit shall comprise of mutiple Semi hermetically sealed Compressors having independent refrigerant circuits, suction & discharge valves, relief valves, oil filter, suction filter,dual pressure switch, oil safety switch, crank case heaters & relay integrated with compressor motor, insulated shell and tube DXchiller, Microprocessor panel , First charge of refrigerant + oil and necessary automated and safety controls Water Flow Swithes shall be provided at the outlet of chiller. The chiller shall be provided with Victaulic couplings/ Flexibe connectors for connecting the chilled waterlines. The compressor motor shall be refrigenrat cooled. The air cooled condenser complete with condenser coil,coil guard, condenser fans & motors ,inter connecting refrigerant piping, fittings,suction line insulation etc. The entire chiller package shall be mounted on a rigid common base frame. The base frame shall be provided with two coats of anti corrosive primer and two coats of epoxy paint.The chillers shall be mounted on a MS framed structure with necessary vibration mounts. The compressors shall be provided with acoustic jackets to minimize the noise pollution. The Db of the chillers with acoutic jackets shall not exceed 78dBA. The microprocessor panel Shall be BMS compitable and has an RS 485 port for sharing the chillers information/ data with BMS Plant manager. Motor shall be suitable for 415+/-10V, 50 cycles,3 phase,4 wire AC supply. The chillers shall be compitable to MODBUS/ Bacnet protocol. The starter shall operate on Soft starter. The chillers shall operate on varying part loads in stepless mechnism (infinite) from 10% to 100%. The Chiller shall meet Min. COP and EER as per ECBC & ASHRAE 90.1 -2006 standards requirement. The manufactuer should furnish the computer selection chart for the below mentioned parameters along with AHRI rating chart for the above nominal capacity. The manufacturer shall offer the maximum efficiency chillers at full load & part loads meeting ASHRAE 90.1, 2010 (S) and ECBC at AHRI condtionsincluding all reuired items for copmletion item of work with the following specification Actual condtions:Chiller actual Capacity required (Minimum) for the below specified paramters :350 TR Entering Chilled water temperature : 54 DEG. F,Leaving Chilled Water temperature : 44 DEG. F ,Chiller side Fouling factor : 0.0005 FPS Units Air over condenser : 106 DEG. F,,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : York/ Trane/ Carrier / Daikin/Climaveneta/ Bluestar/Kirloskar equiv.
2
-
9305069
Supply, installation, testing & commisioning of water cooled screw chillers of below specified actual cooling capacity for 350 Tr with following technical parameters complying with the technical specifications. Evaporator with 54°F inlet water and 44°F outlet water and fouling factor of 0.0001 FPS units. The chiller shall be with tw0 independent refrigerant circuits, having R-134a / R-407c / R-410A / Eco friendly refrigerant. The scope shall include the complete packaged chiller with hermetic / semi-hermetic compressor motor with VFD, condenser, chiller , refrigerant controls & valves, vibration isolators, refrigerant piping and wiring, accessories as required, automatic and safety controls mounted in central console panel and all mounted on a epoxy coated steel frame with spring isolators ,inter connected refrigirent piping including reuired valves and accessories complete as per specifications, suitable for indoor duty conditions and complete assembly mounted on common base frame / skid, painted with anti corrosive paint. Motor shall be suitable for 415+/-10,50 cycles, 3 phase ac supply. Following accessories shall be also included in the scope of supply of chillers. water cooled shall and tube condenser includund other required accessories for copmletion item of work with the following specification. Factory Supplied Electrical starter panel with unit mounted power isolator and BMS ready Microprocessor Panel.Chillers starters shall be VFD, as per manufacturer standard. However, the Chiller should be able to operate from 10 % capacity to 100 % in stepless / infinite steps and this factor should be able to be monitored / controllable from the End User's BMS System for User based HVAC Load Optimisation requirements Counter flanges / victaulic couplings,Rubber joints for cooler and condenser water piping connections etc complete.Vibration isolation devices as recommended by manufacturer for complete structurual isolation. Acoustic jacketing of the chiller to meet the noise level of less than 75 dB(A) at 3 m from unit. Chillers COP should meet the requirements of Green buidling as follows: As per ASHRAE 90.1 2010 path A.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : York/ Trane/ Carrier / Daikin/Climaveneta/ Bluestar/Kirloskar equiv. 350 TR capacity of water coolled screw chiller as per above specifications.
2
-
6919154
Supply, installation, testing & commisioning of Stand alone Chiller Plant Manager with 7" Touch Screen Visual Display Console and with complete connectivity to Client's BMS on OPEN protocol to control and monitor the chillers, Cooling towers, Primary, secondary & condenser water pumps and to handle upto 3 Air/Water cooled chillers, upto 4 Evap + 4 Cond pumps, Primary and secondary pump management, upto 3 cooling towers, Variable/Constant flow system, the rates are all inclusive of wiring, giving connections as per the requirement and labour charges etc complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1789436
COOLING TOWER : Supply, installation, testing & commissioning of Induced draft Cooling tower complete with fans, TEFC, IP-55 Encl. EEF class 1 /IE 2 motors suitable for the following condenser water flow @ 5⁰ F ΔT temperature drop for Summer, Winter & Monsoon at Hyderabad Conditions with FRP moduled fills, access ladder, Support Frame, Fan & Motor, etc. It shall be designed with high efficiency drift eliminators etc. . Each tower cell must be installed with individual cold water basins and water discharge sumps to facilitate maintenance without causing disruption to the other cells in operation.Each cooling tower shall have multiple cells to restrict the height of the cooling tower. The outlet of the cooling tower shall be fitted with factory fitted sound attenuators. All piping connections to the distribution basin should be made of steel and not from PVC. Cooling Tower should be supplied with VFD & Control panel for variable speed operation.. It should be possible to hook up to BMS. All necessary hardware & software should be part of the scope.Vibration Isolators of spring open type designed to minimize any vibration from transmitting to other structures. The wetted steel parts should be give a coat of epoxy fusion in addition to the standard hot-dipped galvanizing for extra protection. For 350 TR –78 Deg.F Wb (Ambient) + 5 Deg F ( Approach ) Flow : 1400 USGPM, with Water Entering Tower at 95 deg F, Leaving temperature of Tower would be 84.9 deg F, cooling capacity 1324058kCal/Hr. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. as per CTI approved make:Bell/Advance
2
-
1358199
Primary Chilled Pumps (3W+1S): Supply, installation & testing commissioning of Centrifugal end suction long coupled back pull out pumps completes with energy efficient TEFC, IP 55 protection 4pole, 1450/1500 RPM squirrel cage induction motor,common base frame for pump & motor, couplings & coupling guard,foundation bolts, mechanical seal etc. The pumps shall have CI body, stainless steel / bronze impeller, SS 410 shaft with mechanical seal. The pump motor shall be suitable for 415V ±10% Volts, 50 cycles and 3 phase power supply. The pump and motor shall be installed on a common base frame , and the entire assembly shall be mounted on floating foundations with spring isolators . The foundation blocks shall have a nosing frame to prevent from corners damage. The pumps shall be supplied as per the below mentioned parameters and tender specification for application application to cater Primary loop. Flow : 840 US GPM, Head : 15 Mwc. The rates are all inclusive of all required accessories and giving connections as per the requirement for completion of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Kirloskar/Mather & Plat/Bell and Gossett/Xylem
4
-
146549
Secondary Chilled Water Pumps (3W+1S): Supply, installation & testing commissioning of Centrifugal end suction long coupled back pull out Pumps completes with energy efficient TEFC IP 55 protection 4pole, 1450 RPM squirrel cage inductor motor,common base frame for pump & motor, couplings & coupling guard, foundation bolts, mechanical seal etc. The pumps shall have CI body, stainless steel / bronze impeller, SS 410 shaft with mechanical seal. The pump motor shall be suitable for 415V ±10% Volts, 50 cycles and 3 phase power supply. The pump and motor shall be installed on a common base frame , and the entire assembly shall be mounted on floating foundations with spring isolators . The foundation blocks shall have a nosing frame to prevent from corners damage. The pumps shall be supplied as per the below mentioned parameters and tender specification for Secondary application to cater Building loop. Flow : 840 US GPM, Head : 25 Mwc. The rates are all inclusive of all required accessories and giving connections as per the requirement for completion of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Kirloskar/Mather & Plat/Bell and Gossett/Xylem
4
-
218094
Variable speed Secondary chilled water pumps Panel: Supply, installation & testing commissioning of BMS compatible Variable Speed Pumping system consists of 4 Nos. x 45HP adjustable frequency drive (AFD) of HVAC application (VLT 6000 series), suitably interfaced with system components, Auto / manual over ride for pumping application, 1 no. Microprocessor based pump logic controller, parallel pumping software, 2nos. Differential pressure transmitters interfacing with system components, control wiring 300 RMT in MS conduit etc. as per tender specification and BOQ. The pumps, motors and Pump logic controllers shall be from single source of supply. The rates are all inclusive of all required accessories and giving connections as per the requirement for completion of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Kirloskar/Mather & Plat/Bell and Gossett/Xylem
1
-
1022535
Condenser Water Pumps (2W+1S): Supply, installation & testing commissioning of Centrifugal end suction long coupled back pull out pumps completes with energy efficient TEFC IP 55 protection 4pole, 1450 RPM squirrel cage induction motor,common base frame for pump & motor, couplings & coupling guard, foundation bolts, mechanical seal etc. The pumps shall have CI body, stainless steel / bronze impeller, SS 410 shaft with mechanical seal. The pump motor shall be suitable for 415V ±10% Volts, 50 cycles and 3 phase power supply. The pump and motor shall be installed on a common base frame , and the entire assembly shall be mounted on floating foundations with spring isolators . The foundation blocks shall have a nosing frame to prevent from corners damage. The pumps shall be supplied as per the below mentioned parameters and tender specification for application application to cater condenser loop. Flow : 1400 US GPM, Head : 18 Mwc The rates are all inclusive of all required accessories and giving connections as per the requirement for completion of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Kirloskar/Mather & Plat/Bell and Gossett /Xylem
3
-
544058
Supply, installation and testing and commissioning of Chilled water Cassette Units with 3 speed fan controller having coil section with 3 row cooling coil, blower section,filter section , insulated drain tray, supports, copper piping connections, drain pump etc. Insulated Extended tray shall be provided to accommodate a pair of ball valves with or with out strainers ,2 way motorised on/ off Control valve etc. Digital thermostat suitbale for BMS connectivity , control cabling wiring and accessories etc. The noise level of the unit shall not exceed 40 dBA at 1 m distance. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: Blue Star/ daikin/Carrier
-
-
-
Supply, installation and testing and commissioning of Chilled water Cassette Units with 3 speed fan controller having coil section with 3 row cooling coil, blower section,filter section , insulated drain tray, supports, copper piping connections, drain pump etc. Insulated Extended tray shall be provided to accommodate a pair of ball valves with or with out strainers ,2 way motorised on/ off Control valve etc. Digital thermostat suitbale for BMS connectivity , control cabling wiring and accessories etc. The noise level of the unit shall not exceed 40 dBA at 1 m distance. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: Blue Star/ daikin/Carrier 1.0 TR / 400 CFM
26
-
43400
Supply, installation and testing and commissioning of Chilled water Cassette Units with 3 speed fan controller having coil section with 3 row cooling coil, blower section,filter section , insulated drain tray, supports, copper piping connections, drain pump etc. Insulated Extended tray shall be provided to accommodate a pair of ball valves with or with out strainers ,2 way motorised on/ off Control valve etc. Digital thermostat suitbale for BMS connectivity , control cabling wiring and accessories etc. The noise level of the unit shall not exceed 40 dBA at 1 m distance. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: Blue Star/ daikin/Carrier 1.5 TR / 600 CFM
26
-
53125
Supply, installation and testing and commissioning of Chilled water Cassette Units with 3 speed fan controller having coil section with 3 row cooling coil, blower section,filter section , insulated drain tray, supports, copper piping connections, drain pump etc. Insulated Extended tray shall be provided to accommodate a pair of ball valves with or with out strainers ,2 way motorised on/ off Control valve etc. Digital thermostat suitbale for BMS connectivity , control cabling wiring and accessories etc. The noise level of the unit shall not exceed 40 dBA at 1 m distance. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes: Blue Star/ daikin/Carrier 2.0 TR / 800 CFM
1
-
53976
Treated fresh air unit: Supply, installation and testing and commissioning of factory made weather proof themal break floor mounted double skin Air- handling units 20000 CFM @ 65 mm wc with combined pre-filter sections with pre filters ( MERV-7), Coil section with 8 row deep, 13 fins/ inch chilled water cooling coil along with insulated SS 304 , 20g drain tray, fan secion with DIDW backward curved centrufugal fan with drive and drive package etc.The entire unit casing shall be made out of 50 mm thk. 40 Kg/ cum density double skin PUF panels. The entire assembly of the unit shall be mounted on a rigid GSS base frame. Inner skin of the panel shall be 0.8 mm thick GSS plain and the outer skin shall be with 0.8 mm thick. pre plasticized powder coated. The chilled water coils shall be AHRI certified. The face velocity of the coil shall not exceed 500 FPM ( 2.5 m/ sec). The face velocity across the filters shall not exceed 350 FPM. The coils and filters shall be the full face of the unit. The fan and motor shall be mounted on a common base frame with cushy foots / spring mounts to avoid vibration transmission to the base of the unit. The fan shall be AMCA certified and motor shall be energy efficient EFF1 . The fan out let velocity shall limit to 9 m/ sec. The fan access door shall have safety door interlock arrangemnt with motor.The unit shall be supplied with fire retardant double canvass connection between the fan out let and supply air flange. The unit shall be supplied with an outlet flange at the the supppy air side along with opposed blade volume control damper. The damper casing and blades shall be made out of 16 Guage Aluminum. One set of commissioning filters shall be supplied along with the unit for system purging . The noise level at allround the unit shall limit to 65dBA from 1 m distance to the unit. The AHU shall be designed for 12 - 16 Hours operation duty conditions and the AHU Motor shall be VFD Compatible and the AHU shall have controls for the motor's VFD to be controlled through time dependent Air Velocity Settings including hardware & wiring and shall be possible to be monitored / controlled through Client's BMS System.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Filters make: Mechmaark/spectrum or its equivalent , FAN Make: NICOTRA/KRUGER or its equivalent, MOTOR Make: BBL/Havells or its equivalent
2
-
705095
AHU: Supply, installation and testing and commissioning of factory made floor mounted double skin Air- handling units with combined pre-filter sections with pre filters ( MERV-7), Coil section with 6 row deep, 13 fins/ inch chilled water cooling coil along with insulated SS 304 , 20g drain tray, fan secion with DIDW backward curved centrufugal fan with drive and drive package etc.The entire unit casing shall be made out of 50 mm thick. 40 Kg/ cum density double skin PUF panels. The entire assembly of the unit shall be mounted on a rigid GSS base frame. Inner skin of the panel shall be 0.8 mm thick GSS plain and the outer skin shall be with 0.8 mm thick. pre plasticized powder coated. The chilled water coils shall be AHRI certified. The face velocity of the coil shall not exceed 500 FPM ( 2.5 m/ sec). The face velocity across the filters shall not exceed 350 FPM. The coils and filters shall be the full face of the unit. The fan and motor shall be mounted on a common base frame with cushy foots / spring mounts to avoid vibration transmission to the base of the unit. The fan shall be AMCA certified and motor shall be energy efficient EFF1 . The fan out let velocity shall limit to 9 m/ sec. The fan access door shall have safety door interlock arrangemnt with motor.The unit shall be supplied with fire retardant double canvass connection between the fan out let and supply air flange. The unit shall be supplied with an outlet flange at the the supply air side along with opposed blade volume control damper. The damper casing and blades shall be made out of 16 G Aluminum. One set of commissioning filters shall be supplied along with the unit for system purging . The noise level at all round the unit shall limit to 65dBA from 1 m distance to the unit.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
AHU: Supply, installation and testing and commissioning of factory made floor mounted double skin Air- handling units with combined pre-filter sections with pre filters ( MERV-7), Coil section with 6 row deep, 13 fins/ inch chilled water cooling coil along with insulated SS 304 , 20g drain tray, fan secion with DIDW backward curved centrufugal fan with drive and drive package etc.The entire unit casing shall be made out of 50 mm thick. 40 Kg/ cum density double skin PUF panels. The entire assembly of the unit shall be mounted on a rigid GSS base frame. Inner skin of the panel shall be 0.8 mm thick GSS plain and the outer skin shall be with 0.8 mm thick. pre plasticized powder coated. The chilled water coils shall be AHRI certified. The face velocity of the coil shall not exceed 500 FPM ( 2.5 m/ sec). The face velocity across the filters shall not exceed 350 FPM. The coils and filters shall be the full face of the unit. The fan and motor shall be mounted on a common base frame with cushy foots / spring mounts to avoid vibration transmission to the base of the unit. The fan shall be AMCA certified and motor shall be energy efficient EFF1 . The fan out let velocity shall limit to 9 m/ sec. The fan access door shall have safety door interlock arrangemnt with motor.The unit shall be supplied with fire retardant double canvass connection between the fan out let and supply air flange. The unit shall be supplied with an outlet flange at the the supply air side along with opposed blade volume control damper. The damper casing and blades shall be made out of 16 G Aluminum. One set of commissioning filters shall be supplied along with the unit for system purging . The noise level at all round the unit shall limit to 65dBA from 1 m distance to the unit.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 10000 CFM /25 TR / 65 mm WG – BF OFFICE AREA
2
-
336136
AHU: Supply, installation and testing and commissioning of factory made floor mounted double skin Air- handling units with combined pre-filter sections with pre filters ( MERV-7), Coil section with 6 row deep, 13 fins/ inch chilled water cooling coil along with insulated SS 304 , 20g drain tray, fan secion with DIDW backward curved centrufugal fan with drive and drive package etc.The entire unit casing shall be made out of 50 mm thick. 40 Kg/ cum density double skin PUF panels. The entire assembly of the unit shall be mounted on a rigid GSS base frame. Inner skin of the panel shall be 0.8 mm thick GSS plain and the outer skin shall be with 0.8 mm thick. pre plasticized powder coated. The chilled water coils shall be AHRI certified. The face velocity of the coil shall not exceed 500 FPM ( 2.5 m/ sec). The face velocity across the filters shall not exceed 350 FPM. The coils and filters shall be the full face of the unit. The fan and motor shall be mounted on a common base frame with cushy foots / spring mounts to avoid vibration transmission to the base of the unit. The fan shall be AMCA certified and motor shall be energy efficient EFF1 . The fan out let velocity shall limit to 9 m/ sec. The fan access door shall have safety door interlock arrangemnt with motor.The unit shall be supplied with fire retardant double canvass connection between the fan out let and supply air flange. The unit shall be supplied with an outlet flange at the the supply air side along with opposed blade volume control damper. The damper casing and blades shall be made out of 16 G Aluminum. One set of commissioning filters shall be supplied along with the unit for system purging . The noise level at all round the unit shall limit to 65dBA from 1 m distance to the unit.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 20000 CFM /50 TR / 65 mm WG – BF OFFICE AREA
2
-
591550
DUCTING WITH INSULATION:
-
-
-
Sheet Metal Duct
-
-
-
GSS Ducting (Factory fabricated):
-
-
-
DUCTING WITH INSULATION: Sheet Metal Duct-GSS Ducting (Factory fabricated): Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/Elipptical ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
DUCTING WITH INSULATION: Sheet Metal Duct-GSS Ducting (Factory fabricated): Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/Elipptical ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Thickness 0.63 mm sheet
300
-
892
DUCTING WITH INSULATION: Sheet Metal Duct-GSS Ducting (Factory fabricated): Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/Elipptical ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Thickness 0.80 mm sheet
120
-
1075
DUCTING WITH INSULATION: Sheet Metal Duct-GSS Ducting (Factory fabricated): Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/Elipptical ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Thickness 1.00 mm sheet
100
-
1222
Acoustic Lining of Ducts: Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with inforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with admium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
956
Thermal Insulation: Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 13 mm thick insulation. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
470
-
869
Thermal Insulation Exposed ducting: Supplying and fixing of following thickness closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete with starbond coating & covered with 24 Ga aluminium cladding as per specifications .19 mm thick insulation. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
1043
Supply, installation, testing and commissioning of volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.The thickness of damper frame shall be 16 Gauge and damper blade shall be 18 Gauge The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
10044
Supplying & fixing of powder coated extruded aluminium supply/ exhaust air grills with aluminium volume control dampers as per specifications.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
9233
Supplying, Fixing,testing and commissioning of motorized fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Fire damper
10
-
12048
Actuator
20
-
13941
Supplying, installing and testing of fresh air Al. intake louvers with Volume control damper, bird screen and fresh air filters complete as per specification & drawings. The thickness of louver frame shall be 2.5 mm and louver blade shall be 2 mm.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
7.5
-
10022
Supply, installation, testing & commisioning of the following heavy Class "C" MS Pipes and fittings confirmed to IS 1239 & IS 3589 as specifications, cut to required lengths and installed with all welded joints, providing and fixing in position neccessary MS supports, fittings like bends, elbows, tees, reducers, mating flanges & sockets on chilled water and condensate water drain piping, etc complete as per the approved shop drawings and specifications. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge..Make: Tata/Jindal
-
-
-
350 mm dia
200
-
4204
250 mm dia
150
-
4204
200 mm dia
200
-
3579
150 mm dia
120
-
2670
125 mm dia
70
-
1881
100 mm dia
180
-
1704
80 mm dia
60
-
1113
65 mm dia
50
-
835
50 mm dia
50
-
670
40 mm dia
40
-
568
32 mm dia
50
-
443
25 mm dia
600
-
341
Supply, installation, testing and commissioning of Pre moulded TF quality EPS pipe sections of density 24 Kg/M3 on chilled water and condensate water drain piping, etc complete with 24G Al cladding as per the approved shop drawings and specifications. 75mm thk for above 100mm dia and 50mm thk for upto 100mm dia. The rates are all inclusive of all required accessories and as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Any ISI make.
-
-
-
350 mm dia (75mm insulation)
200
-
1060
250 mm dia (75mm insulation)
90
-
719
200 mm dia (75mm insulation)
200
-
614
150 mm dia (75mm insulation)
110
-
479
125 mm dia (50mm insulation)
80
-
286
100 mm dia (50mm insulation)
180
-
246
80 mm dia (50mm insulation)
50
-
211
65 mm dia (50mm insulation)
50
-
192
50 mm dia (50mm insulation)
40
-
172
40 mm dia (50mm insulation)
40
-
154
32 mm dia (50mm insulation)
50
-
145
25 mm dia (50mm insulation)
500
-
130
Condenser Water Piping
-
-
-
Supply of the following heavy Class "C" GI Pipes and fittings confirmed to IS 1239,, as specifications . The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Jindal/TATA
-
-
-
350 mm dia
100
-
4204
200 mm dia
80
-
3579
150 mm dia
100
-
2670
100 mm dia
80
-
2008
80 mm dia
60
-
1113
50 mm dia
75
-
670
40 mm dia
40
-
568
32 mm dia
30
-
443
VALVES
-
-
-
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O-ring & PN 16 pressure rating for chilled water /hot water circulation as specified. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge..Make:SANT/ ZOLOTO / AUDCO
-
-
-
350 mm dia
5
-
22723
250 mm dia
16
-
18633
200 mm dia
24
-
7839
150 mm dia
5
-
6476
125 mm dia
4
-
5681
100 mm dia
32
-
5056
80 mm dia
8
-
4601
65 mm dia
16
-
3620
50 mm dia
12
-
3111
40 mm dia
10
-
3011
32 mm dia
2
-
2329
BUTTERFLY VALVE (MOTORISED) with manual override control/ wheel with C I body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make/HONEYWELL /Jhonson/ seimens
-
-
-
250 mm dia
3
-
168832
200 mm dia
4
-
131225
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:SANT/ ZOLOTO / AUDCO
-
-
-
250 mm dia
5
-
221549
200 mm dia
6
-
158493
100 mm dia
2
-
58266
NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. KIRLOSKAR / ZOLOTO / SANT
-
-
-
250 mm dia
6
-
23973
200 mm dia
8
-
17004
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation & PN 16 pressure rating as specified.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:UPADYAYA/SANT
-
-
-
250 mm dia
6
-
27040
200 mm dia
8
-
22041
100 mm dia
2
-
6476
Providing and fixing in position the industrial type pressure gauge with measurement range 0 to 10 bar complete as required.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes:H - GURU /BEIG
80
-
2052
Providing & fixing in position the mercury in glass industrial type thermometer with measurement range 0 to 40 degC complete as required. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:Waree/Forbes Marshall
60
-
1452
Providing, fixing, testing and commissioning of Purge valve with 15mm ball valve for drain and automatic air vent.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:ZOLOTO / HAWA/ VB/JAINSONS
20
-
1475
Providing and fixing expansion bellows with control rods/ Spacer in pipe connections to equipment of the following sizes:The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
250mm dia.
6
-
4784
200mm dia.
24
-
11009
Expansion Tank
-
-
-
Supply, Installing, Testing and commissioning of the Capacity - 1000 Litre capacities CS Closed Expansion tank with full acceptance Factor and shall be ASME rated/ European standard code no. 97/23/EC, pre-charged bladder-type pressure vessels. The tank shall be designed to absorb the expansion forces of heating/cooling system water while maintaining proper system pressurization under varying operating conditions. The heavy duty bladder should contain system water thereby eliminating tank corrosion and water logging problems. The system should include PRV and Airvent also. And complete as per technical specification. Tank shall be selected for PN-20 rating The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
255747
Air Separator
-
-
-
Furnishing and installing, as shown on plans, a centrifugal type air separator for 350 dia pipe size. The unit shall inlet and outlet connections tangential to the vessel shell. The unit shall have an internal stainless steel collector tube with 5/32” (4mm) diameter perforations and 63% open area designed to direct accumulated air to the compression tank on an air control system or an air vent on an air elimination via an NPT vent connection at top of the unit. The air separator shall be pressure rated for 20Kg/ cm sq (PN 16)The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
174513
Providing, fixing and testing GI 'B' Class drain piping for condensate complete with 9mm thick nitrile rubber insulation covered with interwoven glass fabric for UV and mechanical protection, all required fittings and providing clean out plug at suitable location for roding the pipe when required.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : TATA/Jindal or its equivalent.
-
-
-
80 mm dia
100
-
1136
50 mm dia
50
-
516
40 mm dia
30
-
479
25 mm dia
500
-
306
Supply, installation testing and commissioning of BTU meter for following flow. The BTU meter should have a built in minimum 8 digit LCD display for display of parameters, values and faults. The meter should be compatible with the BMS system. The minimum functions to be provided by the BTU meter is as under • M Bus Software to be included. • Calculation and storage of maximum values • Minimum One month Storage of billing data. • Measurement of tariff dependent data. • Storage of 13 monthly cumulative energy/volume values in EEPROM. • Detection of faults. • Display of values , parameters and faults. • Selectable scope of display • Test and service functions. The BTU meter should have a minimum sampling time for flow every 3 seconds and temperature 24 seconds. Possible displays to be indicated are KWH, MWH, GJ, MJ, KW, m3, m3/hr ,h and Deg C. The BTU meter should have a minimum accuracy of class 2 with CE conformance. accuracy of class 2 with CE conformance, with all required controls.The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
350mm dia
1
-
553873
250 mm dia
2
-
346526
Supply, installation, testing & commisioning of Chemical Dosing Sets for Cooling Water including a dosing pump, with interconnecting tubing and foot valve, chemical storage tank of 25 liters, ionization sensor and required controls. The rates are all inclusive of all required accessories and giving connections as per the requirement for finished item of the work ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:anergy/ionexchange
1
-
511268
ADDRESSABLE FIRE ALARM SYSTEM
-
-
-
Supply, Installation, testing and commissioning of wall mounting 8 loop micro processor based analog addressable fire control panel expandable by minimum 2 additional loops with minimum 80 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as per the specification and as required fixing of 8 loop Micro processor based Fire Alarm control panel with zonal indictions and battery back up as per detailed specifications.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
1
-
454460
Supply and laying of 25mm dia 1.6mm thick-PVC CONDUIT FRLS PVC conduits run on surface of wall/ above false ceiling/ concealed in wall and all fixing accessories/ materials.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make- Sudhakar/VIP/Precision/Modi
20000
-
79
Supply and laying of 3C X1.5 sq.mm 650V grade shielded PVC insulated copper conductor flexible wires through existing PVC conduit.( Shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make-Polycab/RR Kabel/Finolex
15000
-
102
Supply and installation of intalligent analogue addressable multi criterion smoke detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
600
-
4056
Supply and installation of intalligent analogue addressable multi criterion detectors above false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
800
-
4056
Supply installation testing and commissioning of response indicators with all fixing accessories,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
568
-
148
Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
72
-
5283
Supply, Installation, testing and commissioning of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
72
-
5067
Supply and fixing of Exit Light fixtures with 1.5hrs battery backup as per the requirement of department and Engineer-in-charge, the rates are inclusive of all items and its accessories for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
5143
Supply and Installation of Intalligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
70
-
4317
Supply and Installation of Intalligent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
100
-
4488
Supply and fixing of Duct Detectors for AHU's for different levels.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
25
-
13097
Supply and Installation of Intalligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required and as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
85
-
4488
Supply, Installation, testing and commissioning of intellegent analogue addressable Repeater panel including the cost of mounting accessories complete as per specification as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Notifier / Edwards
1
-
120432
Supply, Installation, testing and commissioning 3 Core x 2.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kabel/Finolex
250
-
151
PUBLIC ADDRESS SYSTEM
-
-
-
Supply and installation testing and commissioning of 6Watt 180mm dia recessed/ surface mounted white color speakers (along with junction boxes to be used in no false ceiling area).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Honeywell/Bosh/Phillips
348
-
1363
Supply, Installation, testing and commissioning shielded twin twisted pair 1.0 sqmm cable in existing conduit ( Shall be on actuals).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kabel/Finolex
8000
-
36
Supply installation testing and commissioning of amplifier with inbuilt 480 watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Honeywell/Bosh/Phillips
4
-
39765
Supply installation testing and commissioning of amplifier with inbuilt 240watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Honeywell/Bosh/Phillips
2
-
28404
Supply Installation testing and commissioning of 4 MIC with all accessories as per the requirement of Engineer-in-charge. The rates are inclusive of all accessories and standard.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: any top brand
1
-
6817
ELECTRONIC TALK BACK SYSTEM
-
-
-
Supply, Installation testing and commissioning of Microprocessor Based talk back announcing console suitable for selecting 15 zones, having keypad for zone selection, LED indication & gooseneck microphone for making announcenments.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
283924
Supply, Installation testing and commissioning of Supply of rack mounted Booster Amplifier 480 W ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Honeywell/Bosh/Phillips
1
-
40561
Supply, Installation testing and commissioning of Main distribution box for 32 zones as per the requirement of Engineer-in-charge and the rates are inclusive of material and labour etc complete for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
46355
Supply, Installation testing and commissioning of wall mounted type speakers with talk back facility, in moulded plastic atractive encloser , complete with switch, Weather proof canopy, driver unit, and junction box ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Honeywell/Bosh/Phillips
26
-
5794
Supply Installation testing and commissioning of 9U high 19" width, 600mm depth, Rack assembly Made of MS Channels with Side panels, 1 fan at the top for ventilatio, Powder coated to RAL 7035 Spare U covered with blank panels Suitable for mounting,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Vall/HCL
2
-
17383
Supply, laying, testing and commissioning of 4 pair of 1.5 sq. mm,armoured FRLS PVC insulated copper cables confirming to IS standards and specifications with necessay connectors. ( Quantity shall be on actuals) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Polycab/RR Kabel/Finolex
4000
-
174
FIRE EXTINGUISHERS
-
-
-
Supply installation testing and commissioning of ABC type Fire Extinguisher of 5.0 Kgs, fitted with discharge control valve ( squeeze grip type ) , inside STORED PRESSURE with ISI mark, with discharge hase and open nozzel overall conforming to IS: 15683 with ISI mark along with wall bracket and initial refilling at site . Fire Rating 2A.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Cease Fire / Minimax
200
-
7271
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Cease Fire / Minimax
300
-
11021
Supply & Fixing of DCP type Fire Extinguisher of 5.0 Kgs, fitted with discharge control valve ( squeeze grip type ) , inside STORED PRESSURE with ISI mark, with discharge hase and open nozzel overall conforming to IS: 15683 with ISI mark along with wall bracket and initial refilling at site . Fire Rating 2A.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Cease Fire / Minimax
200
-
6249
Supply and installation, and laying of 3 C x 1.5 sqmm 1.1KV PVC XLPE insulated cables of copper conductor with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polyca/RR Kabel/Havells/Finolex
100
-
273
Supply installation testing and commissioning of 32 Zone Control panel with Fire/Fault indications for the Sprinkler Flow switches.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:System Censor/Ravel/Pinnacle
8
-
47145
FIRE FIGHTING SYSTEM
-
-
-
Supplying and fixing double headed Internal/External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required including accessories such as Flange, Nuts, Bolts, Washers, Gasket, suitable bends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
60
-
13719
Supplying , fixing and testing of of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to branch pipe, mounted on wall OR raised brick platform accommodate 2 Nos 15 mtr long Hose pipe, 1 No and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
72
-
3238
Supplying , fixing and testing of 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
150
-
6397
Supplying , fixing and testing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gunmetal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
60
-
2500
Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Make: Eversafe/ Reliance/ Newage/ SRI, b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Safex.c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
7612
Supply, installation, testing and commissioning of 25mm dia Ball valve,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Zoloto / Leader / Approved makes
50
-
693
Supplying , fixing and testing of specially designed SS orifice plates of thickness 6mm on hydrant outlets of landing valves including distant pieces of suitable size for adjustment of delivery pressure of 3.5 kg/ sq.cm as required by LPA complete including accessories such as Flange, Nuts, Bolts, Washers, Gasket, suitable bends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
11362
Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Jindal / Hissar / Tata pipes
-
-
-
a) 250mm dia
400
-
4204
b) 200mm dia
400
-
3579
a) 150mm dia
2728
-
2670
b) 100mm dia
1600
-
1704
c) 80mm dia
1500
-
1113
d) 65mm dia
6000
-
835
e) 50mm dia
7500
-
670
f) 40mm dia
8000
-
568
g) 32mm dia
8000
-
443
h) 25mm dia
13500
-
341
Providing, installation, testing and commissioning of dual plate non - return valve of 100mm dia size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
1
-
9487
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
-
-
-
a) 150mm dia
25
-
6476
b) 100mm dia
31
-
5056
c) 80mm dia
7
-
4601
d) 65mm dia
5
-
3408
Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:RB / TBS / VB
8
-
1329
Supplying and fixing Single headed Internal / External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required including accessories such as Flange, Nuts, Bolts, Washers, Gasket, suitable bends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
12
-
8294
Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specificatios including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
a) 150mm dia
100
-
102
b) 100mm dia
100
-
91
c) 80mm dia
50
-
68
Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Mini Max / Safex / Newage / Winco / Padmini.
4
-
6817
Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as conforming to IS 904 as required ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
1
-
9089
FIRE PUMP ROOM
-
-
-
Supplying & installing completely testing & commissioning of electrically Driven End suction and back pull out pump with cast iron casing & bronze or phosphor bronze internal parts, for fire duty, complete with coupling guard necessary RCC foundation,capable of discharging 2850 lt/min against 100 metre head at 10 bar against all losses complete electrically operated TEFC 3-ph, 440-V, 50 Hz, 2900 RPM motor of ‘F’ class winding, make as approved by TAC with automatic direct on line starter complete with single phasing preventor & No volt release common base plate, foundation bolts, suitable cable entry gland box for A-AL cable (95 sq.mm) pressure guages & wired for automatic start of the water pump on drop of pressure in the wet riser/ hydrant and sprinkler system. The motor starter and pump should confirm & and IE Regulations. The pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head.(Main Hydrant Pump and sprinkler),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar/Mather&Platt.
2
-
624883
Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as requiredincluding Labour and transportation cost for finished item of work as per the instructions of engineer in charge. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 100 Mtr head conforming to IS1520 including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt
1
-
965728
Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following :complete in all respect as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70-100 Mtr head conforming to IS 1520 including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ KirloskarMake:Polycab/RR Kabel/Finolex
2
-
109070
Supplying , installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325, c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti vibration pads ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes of Pumps : Kirloskar / Mather&Platt.Makes of Motors : Siemens / ABB / Kirloskar/Mather&Platt
1
-
69305
Supply, Installation, Testing and Commissioning of Indoor / outdoor, weatherproof 3 phase 415V 4 wire Free Standing Floor mounted MV panel(Fire Control Panel)made out of 14 SWG CRCA sheet after seven tank process and painting with Epoxy powder coating including all switchgear as detailed below. The panel shall consist of suitable rating TPN Aluminium/Copper busbar (at the rating of 0.8A/Sq.mm/1.6A/sq.mm) supported with DMC/ SMC barriers and colour coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be mounted on channels grouted to the existing floor including all materials. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2 GI flats of adequate size to the main earth bus of 50x6mm GI flat. The size of all Panel Mounting Meters shall be 96X96mm.The Panels shall be mounted on U channels including supply and fixing of the same.All MCCBs shall have 80-100% thermal setting plug. MCBs shall be provided for Control purposes.Supply, installation, testing and commissioning of electrical control panel diesel engine main motor and jockey pump, comprising of following. All contactors shall have status feed back provision to BMS. Incoming – 630A,50KA FP MCCB -1 set (with Mechanical interlocking between incommers and Bus couplers) Busbars : 630A TPN aluminium BUSBARS- 1SET Outgoings : (1) DOL starter with MCCB and contactor, over load relay,single phasing preventor and ON/OFF/TRIPindication lamps for motor -3set (2) DOL starter same as above for Jockey pump - 1 set (3) 63A , TPN MCCB for terrace booster pump - 0 Set Metering ; Voltmeter, Ammeter, LED phase Indication lamps, Ammeters for both outgoings The Rate shall include supply and fixing of all The Rate shall include supply and fixing control devices for auto operation of pump of all motors.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes for Switchgear & Overload relay:L & T / SIEMENS /SCHNEIDER. Makes for Digital Meter:circutor / conserv ( schneider) / elmeasure / electrex.makes of capacitor all pp / heavy duty mpp:universal / meher / schneider / neptune/l&t, makes for control switches: kaycee/gec/alstom /salzer.makes for push buttons & indication lamps:technic / vasihno /schneider.makes for bus bar trunking:schneider / l & t / power bar / c&s.makes for bus bar supports:powermat / approved equivalent
1
-
397653
Supplying, installation testing and commissioning Cast Iron Body Sluice valve PN 1.6 Non-rising stem type conforming to IS:780, with flanged ends ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:KIRLOSKAR / ZOLOTO / SANT
-
-
-
a) 250mm dia
2
-
38629
b) 200mm dia
4
-
31812
c) 150mm dia
5
-
24995
d) 100mm dia
3
-
21019
c) 80mm dia
2
-
18746
Supplying, installation testing and commissioning C.I. Non-return valve conforming to IS : 5312 with flanged ends (heavy) tested to 250 psi hydraulic pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open ands hut position as per fire practice etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:KIRLOSKAR / ZOLOTO / SANT
-
-
-
a) 200mm dia
1
-
31812
b) 150mm dia
4
-
24995
c) 80mm dia
2
-
17042
Supplying, installation testing and commissioning of 250mm dia Foot valve/strainer with Flanged ends. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
39765
Supply, installation, testing and commissioning of 25mm dia Gate valve ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Zoloto / Leader / Approved makes
6
-
1250
Supplying, installation testing and commissioning of G.M. Non-return valves 25mm dia conforming to IS 778 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:KIRLOSKAR / ZOLOTO / SANT
6
-
2840
Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
17042
Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .MAKE: HGURU / FIEBIG and Approved makes
8
-
716
Supply and fixing of Pressure Switch in the MS pipe Line including connection etc as required. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : Danfoss / Indfoss / Approved makes
5
-
2840
Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1500
-
73
Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:Polycab/RR Kabel/Finolex/Havells/KEI
-
-
-
a) 3.5C x 185.sqmm AYFY cable ( to main pump )
120
-
1978
b) 4C x 16sqmm AYFY cable ( for jockey pump & booster pumps)
40
-
372
c) 3.5 Core x 1.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.
200
-
199
d) 12 C x 2.5.sqmm copper control cable ( To Diesel driven pump)
60
-
456
AUTOMATIC SPRINKLER SYSTEM
-
-
-
Supply, fixing, testing and commissioning of 15mm size quartzoid bulb type sprinklers of rating 68ºC. pendent / side wall with required accessories. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SAFEX / HD / TYCO / VIKING / NEWAGE /
3000
-
545
Supply and installation, Providing and fixing approved make 15mm orifice quartzoid bulb type sprinklers, 68°C rating, recessed upright type with rossset plate (adjustable) off white finish wherever required and all accessories, supports and painting etc.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: SAFEX / HD / TYCO / VIKING / NEWAGE
2200
-
596
Supply, fixing, testing and commissioning of UL approved flexible dropper of 1.5 Mtrs length with required accessories. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: SAFEX / HD / TYCO / VIKING / NEWAGE
2200
-
1420
Supply and fixing Flow Switches in MS pipe. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : System Sensor / Switzer / NOTIFIER /HONEYWELL
-
-
-
a) 150mm dia
13
-
7953
b) 100mm dia
26
-
5681
c) 80mm dia
7
-
5113
d) 65mm dia
5
-
4885
c) 50mm dia
1
-
4658
Supply,installation,testing and commissioning of 80mm Dia Motorized Butterfly valve for Water curtains with electrical motors suitable for 220V, Single Phase 50Hz AC ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:SANT/ ZOLOTO / AUDCO
1
-
36357
Supply,installation,testing and commissioning of 65mm Dia Motorized Butterfly valve for Water curtains with electrical motors suitable for 220V, Single Phase 50Hz AC ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:SANT/ ZOLOTO / AUDCO
3
-
31244
Supply,installation,testing and commissioning of 50mm Dia Motorized Butterfly valve for Water curtains with electrical motors suitable for 220V, Single Phase 50Hz AC ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:SANT/ ZOLOTO / AUDCO
2
-
28233
Water curtain motor control Panel:Supply and installation of water curtain control panel made out of 2MM thick CRCA steel sheet enclosure consisting with following items, Incoming – 63A TPMCCB 1No, Outgoings : TP 10 Amps DOL starter with MPCB-1No, Contactor for controlling butterfly valve – 1No, Metering 0-500V with selector switch- 1set, Ammeter: 0-63A with CT & selector switch- 1set, Indication lamp- 1set ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Seimens/C&S/ABB/Schneider
5
-
22859
Providing, installation, testing and commissioning of gun metal valves of 50 mm dia 50mm dia sizes as required. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Newage / Winco / Padmini / Safex.
50
-
1954
Supply,installation,testing and commissioning of 15mm Dia water curtain nozzles ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:NEWAGE / WINCO/AAG
100
-
914
Providing, fixing, testing, commissioning of installation control valve of 150 mm dia Cast iron body and brass / Bronze bronze seat clapper, and clapper arm, hydraulically driven mechanical go Cast iron body and brass / Bronze bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser / Sprinkler system activates,pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass , test control box, ball valves, Ms pipe of required size, flanges, orifice plate, gasket etc of size 150mm dia as required. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : HD / TYCO / NEWAGE
2
-
45673
CAMERAS
-
-
-
Supply, installation, Testing and commissioning of 1/3" colour motion based, IR Dome type IP vandal proof POE cameras with resolution of minimum 02 Mega pixel or higher, Day & Night type and min illumination of 0.001 lux with varifocal lens suitable for covering distance of 10 - 15 mtrs for indoor application at Double Height Areas along with complete fixing accessories and required software and licenses for the cameras. ( Common areas ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
180
-
22411
Supply, installation, Testing and commissioning of 1/3" colour motion based, IR Bullet type Camera with additional Weatherproof Housing, IP vandal proof POE cameras with Varifocal lens resolution of minimum 02 Mega pixel or higher, Day & Night type and min illumination of 0.001 lux with lens suitable for covering distance of 25-40 mtrs for outdoor application along with complete fixing accessories and required software and licenses for the cameras.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
30
-
22565
Supply, installation, Testing and commissioning of 1/3" colour motion based, IR Box type IP vandal proof POE weather proof ANPR cameras with 10-40mm Varifocal lens resolution of minimum 02 Mega pixel or higher, Day & Night type and min illumination of 0.001 lux with lens suitable for covering distance of 10-20 mtrs for Vehicle monitoring, Number Plate and Driver identification along with complete fixing accessories and required software and licenses for the cameras. ( Main gates ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
2
-
72514
Supply and installation, Testing and commissionig of ¼ colour high speed MPEG4 compliant with 30 X PTZ adjustment IP camera with resolution ,min illumianance of .005 lux under day night application should be able to cover a distance of minimum 300 Mtrs along with software & license . It should have weather proof housing with IP66 certification shall be along with mounting brackets.Makes: Honey well/Phillips/Bosh/Avigilon/Axis
* Pole Mount bracket for 04 camera.
* Camera License ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
166219
Supply, installation , testing and Commissioning of Joy-Stick Keyboard Controller for PTZ Cameras as per the requirement of the department and Enigneer-in-charge. The rates are inclusive of labour and material for finished item of work.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
85418
Supply, installation, Testing and commissioning of 1/3" colour motion based, IR Dome type vandal proof analog HD cameras with resolution of minimum 2 Mega pixel or higher, Day & Night type and min illumination of 0.001 lux with Varifocal lens suitable for covering distance of 10 mtrs for indoor application inside the lifts with suitable Baluns both the end, SMPS Power supply units and complete fixing accessories as required for the cameras. ( shall be connected to the lift flat cable ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
15423
SWITCHES, NVR, SOFTWARE, STORAGE & MONITORS
-
-
-
Supply and installation testing and commissioning of 24 port Power on Ethernet (POE) with 2 FPS 100/1000 gigabit switch suitable for above cameras , 2 No's of Fiber optic module Pigtails, along with all required connectors, Adequate weatherproof Enclosures and fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
4
-
35230
Supply and installation testing and commissioning of 16 port Power on Ethernet (POE) with 2 FPS 100/1000 gigabit switch suitable for above cameras , 2 No's of Fiber optic module Pigtails, along with all required connectors, Adequate weatherproof Enclosures and fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
13
-
35230
Supply and installation testing and commissioning of 08 port Power on Ethernet (POE) with 2 FPS 100/1000 gigabit switch suitable for above cameras , 2 No's of Fiber optic module Pigtails, along with all required connectors Adequate weatherproof Enclosures and fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
1
-
23542
Supply and installation testing and commissioning of 04 port Power on Ethernet (POE) with 2 FPS 100/1000 gigabit switch suitable for above cameras , 2 No's of Fiber optic module Pigtails, along with all required connectors Adequate weatherproof Enclosures and fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:D-Link
2
-
23542
Supply, installation, testing and commissioning of 08 channel Embedded NVR suitable for the above mentioned ANPR & Additional Cameras, including Storage of 6 TB Minimum, Fulltime recording , @ 24 frames and above, Recording for 30 days minimum, including all required connectors and fixing accessories in complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
1
-
307727
Supply, installation, testing and commissioning of Rack Mount type 64 Channel Embedded Hardware Based NVR's suitable for the above mentioned Cameras and support upto 12 megapixel High End cameras, HDMI & VGA interface, Minimum 2 No's Gigabit LAN ports for network connectivity, including Storage of 36 TB Surveillance HDD/ 8 Slots, Per slot 6TB HDD,withRAID 5 & HDD Failover Support, recording @ 8 frames per second minimum, motion capture, including all required connectors and fixing accessories in complete.
Note: Sufficient Connecting cables, connectors and mounting accessories shall be included ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honey well/Phillips/Bosh/Avigilon/Axis
2
-
340986
Supply installation, testing and commissioning of latest configuration PC, CPU with 50'' LFD Display Monitor for Remote monitoring purpose, The PC is expected to be with preloaded OS and suitable software’s, Graphic Cards, 8gb RAM Minimum and with 500gb Hard Disk. Including all accessories as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HP/DELL
4
-
245754
Supply and installation of 42 U wall / Floor mounting network rack with power spike including all accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Netrack/Valrack
2
-
52348
Supply and installation testing and commissioning of 24 port L3 switch fully managed SNMP (simple network management protocol) 10/100/1000 with 04 port Fiber uplink SFP (Small form factor) gigabit switch suitable for above connectivity along with all required connectors and fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: D Link
1
-
77591
Supply installation testing and commissioning of suitable IP Based HD DVR's for connecting the above mentioned HD analog cameras ( lift cameras - 06 nos ), with inbuilt storage of minimum 4TB inbuilt, and along with required accessories. Also the DVR shall be comparable with the centralized NVR & VMS software for live viewing and playback.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. a) 4 port HD DVR's suitable for make of NVR/VMS Make: Hkvision/Honeywell/Bosh/CP-Plus
2
-
63797
CABLES & CONDUIT
-
-
-
Supply and Laying of Cat6-UTP Cable for interconnections of cameras, Server and monitoring stations,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Legrand/D Link
15000
-
24
Supply and fixing of 25mm outer dia heavy guage FRLS with IS:9537 part 3 rigid PVC pipe. ( Shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sudhakar/VIP/Universal
9500
-
60
Supply and fixing of 25mm dia PVC Flexible conduit for taking copper wires including all accessories ( Shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sudhakar/VIP/Universal
200
-
37
Supply, laying, testing and commissioning of 3 core X 2.5 sq mm armoured cable laid in ground for PTZ cameras, along with all fixing accessories .,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Versha
400
-
129
Supply and Laying of 6 Core(indoor / outdoor ),Single mode armoured optic Fibre cable & 1" HDPI Pipe with all required connectors, Pigtails and all accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Legrand/Dlink
500
-
122
Supply and installation of 12 port fibre distribution unit (FDU/LIU's), loaded with couplers etc.,,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Dlink
2
-
18858
Supply and laying of Hume pipe of 50mm Gi Class 'C' for laying across the drive way.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Jindal/Reputed local
50
-
463
Supply and installations of 4 meters tappered pole for cameras with weather proof enclosure for mounting media convertors and required accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Godrej/Bajaj/Valmont/Utkarsh/Laasma or its equivalent.
4
-
11816
Supply, Laying and Testing of RG6 Coaxial copper cable including BNC connectors and all fixing accessories in complete. ( Required for lift cameras - shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Versha
300
-
29
Supply, laying, testing and commissioning of 2 core X 1.5 sq mm unarmoured cable for powering up the analog cameras along with required accessories ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Versha.
300
-
39
Supply and installation of pole mount Polycarbonate housing & SS Mounting plate of suitable sized weather proof box pre-installed for housing the Media Convertor, Electrical safety kit, 2 x RJ45 connectors (10/100 Mbps), 2 x SFP connectors (100/1000 Mbps) for SFP fiber optic modules, Operating conditions of -40 to + 65 deg C, Pre installed Cable gaskets, DIN rails, Cable clamps, Power cover for MCB fuse, lightning Surge Protection, 12V DC power supply unit along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Axis/CPRI
4
-
17118
ACCESS CONTROL SYSTEM
-
-
-
Note: The access control system shall be planned for the entry & exit with Proximity card reader and over ride with glass break switch in emergency . The doors shall be provided with electromagnetic locks as required with a magnetic contact and beeper. The system suppliers shall submit a schematic and the technical literature on the system proposed along with the requirements for interconnection cables. The system shall have a suitable power pack to suit the requirement, all the material required shall be considered as per the specification and should integrate with fire alarm system.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HID
-
-
-
READERS & CONTROLLERS
-
-
-
Supply, installation, testing & commissioning of HID Format Proximity card reader range 4 inchincluding all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HID/Rosslare
118
-
8336
Supply, installation, testing and commissioning of following no of Readers / Weigand based Doors Controller connected to the LAN, including required SMPS units for the controllers & Readers, along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Incine/Bell/Evelco
50
-
54990
1 DOOR / 02 READERS CONTROLLERS ( to be installed near to the door ) Makle:Ravel/KAC
-
-
-
EM LOCKS & OTHER ACCESSORIES
-
-
-
Supply, installation, testing and commissioning of the below mentioned Electromagnetic locks, along with Door delay electronic buzzer, magnetic contact, and suitable power units for Access doors along with all fixing accessories. ( Require wooden supports shall be provided in the Metal Door frame along with U or L clamps supports whereever required.),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle:Ravel/KAC
57
-
5960
Single leaf EM Lock 600 lbs with the above requirement
-
-
-
Supply, fixing, testing and commissioning of the glass break switch in emergency for Access doors along with all fixing accessories. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle:Ravel/KAC
29
-
1726
Supply, testing and commissioning of HID Proximity cards along with accessories ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HID/Rosslare
1000
-
151
Supply, fixing, testing and commissioning of the exit switches for Access doors along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle:Ravel/reputed Ebelco
28
-
755
PC , SOFTWARE & SWITCHES
-
-
-
Supply, Installation, Commissioning & Testing of a latest configuration PC with suitable softwares along with Access control time and attendance software, which can be expandable and has features like reporting, Administration control , HR, Management etc.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle:HP/DELL/SSI
1
-
353352
Supply, Installation, Commissioning & Testing of a latest configuration PC with preloaded OS, MS Office along with Visitor Management Software, camera , licence and a laser printer A4 size etc. ( Purpose - Visitor Management Control system ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle:HP/DELL/SSI
1
-
276191
Supply installation testing and commissioning of 24 port ethernet switch with all connecting accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makle: D Link/Cisco/HP/Netgear
4
-
12973
Supply and laying of following heavy gauge FRLS PVC 25mm dia conduit concealed in wall/ above false ceiling/ cable tray for taking control cables including all accessories such as Conduit junction boxes, bends etc as required ( shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sudhakar/VIP/Universal
1650
-
60
Supply and laying of following FRLS PVC 25mm dia flexible conduit at above false ceiling for taking control cables including all accessories as required ( shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sudhakar/VIP/Universal
90
-
37
Supply, laying, testing and commissioning of following size 650V grade shielded twisted PVC insulated copper conductor flexible cables through existing PVC conduit along with all fixing accessories. (Shall be on actuals).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Varsha
-
-
-
12 core X 2.5 sq mm armoured cable ( for Card readers IN & Out )
1200
-
135
4 core X 2.5 sq mm armoured cable(for EML, buzzer & Magnetic Contact)
1200
-
58
3 core X 2.5 sq mm armoured cable laid in ground for powering up the turnstiles / flap barriers
300
-
129
TURNSTILES & FLAP BARRIERS
-
-
-
Supply, Installation, Testing and Commissioning of Heavy duty DC drive motor driven 3 x 120 deg half height SS Top & SS tube Tripod turnstiles with drop arm feature (which shall operate with a touch and not by push after card validation) with arm length of NOT less than 500mm including all accessories and required civil works,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Godrej/Magnetic Auto controll
3
-
179021
Supply and installation of single normal lane flap barrier with SS304, 520mm normal passage Width, tailgating feature with option of integrating with Access control. The system shall be with emergency release switch in built in order to deactivate the system in emergency.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Godrej/Magnetic controll/FAAC
3
-
618324
Supply and installation of single normal lane Swing Gate with SS304, 900mm passage Width, tailgating feature with option of integrating with Access control. The system shall be with emergency release switch in built in order to deactivate the system in emergency. ( For Handicap persons access),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Godrej/Magnetic controll/FAAC
1
-
790906
BOOM BARRIER SYSTEM
-
-
-
Note :Boom barriers shall be planned for the main gate operation with automated Induction and safety loop. The system suppliers shall submit a schematic and the technical literature on the system proposed along with the requirements for interconnection cables. The system shall have a suitable power pack to suit the requirement complete in all respects.
-
-
-
Supply, Installation, testing and commissioning of 4 meters length electromechanical motorized automated boom barrier with 100% duty cycle with power supply unit , photo sensors & Remote control. This shall be with safety features like Induction and safety loop etc with remote operating facility with remote control unit, along with 04 nos of photo cells with each boom barrier. The system shall be complete in all respects along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Godrej/Magnetic controll/FAAC
2
-
151487
Supply, Installation, testing and commissioning of 2.5 meters length electromechanical motorized automated boom barrier with 100% duty cycle with power supply unit , photo sensors & Remote control. This shall be with safety features like Induction and safety loop etc with remote operating facility with remote control unit, along with 04 nos of photo cells with each boom barrier. The system shall be complete in all respects along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Godrej/Magnetic controll/FAAC
2
-
151487
Supply, Installation, testing and commissioning of RF based UHF long range reader ( range 10 mtrs ) & in-built controllers with supportive Input output board for boom barriers along with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Pegasis/Rossalare/Pegasus
4
-
89758
Supply, Installation, testing and commissioning of passive tags for vehicles ( which will be programmed for operation of the boom barriers ). ( Qty may change based on requirement),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Rossalare/Pegasus
500
-
118
Supply, Laying, testing and commissioning of 3 C x 2.5sqmm shielded cable laid in 25mm dia heavy gauge PVC conduit with fixing accessories ( Shall be on actuals ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Varsha.
100
-
147
Supply and fixing of 25mm dia heavy guage FRLS PVC conduit for taking copper wires including all accessories such as Conduit junction boxes, bends etc as required ( Shall be on actuals),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sudhakar/Universal/VIP
80
-
60
BAGGAGE SCANNERS & DOOR FRAME METAL DETECTORS
-
-
-
Supply , installation , testing and commissioning of 2D x-ray images baggage scanner of 530 x 350mm inspection tunnel size along with all accessories including monitoring PC and interconnections.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Rapiscan/Rapidscan/Godrej/Altramind
1
-
2161616
Supply installation testing and commissioning of High sensitive door frame metal detectors (6 distinct pinpoint zones) with all accessories in complete condition. This shall be used at the main entrance and exit points of the facility,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Sivananda/Godrej/Ashirvad
8
-
191129
Supply ,Installation and commissioning of Under vehicle scanner system with automated licence plate reading system. Shall have main camera of high speed Area scan CCD digital colour camera of resolution 4000 pixels or more attached with fish eye lens, Loop based sensors, Vehicle license plate and driver image view IR camera and Auxillary High end video cameras for capturing the images of vehicle underside. It shall also include Quad core i5 based computer system with 4GB RAM, HDD 500 GB, Linux operated, Min 3 PCI slots or as required by the system for operation along with cables. The system shall have 1 KVA ONLINE UPS with backup of 01 hour and network port for connectivity along with all cables and fixing accessories including civil works along with water draining system in case of water egress into the pit ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Brosis/Essi/Godrej/Nuvoscan
1
-
5088472
Supply and laying of 3core 2.5sq.mm Copper conductor PVC insulated armoured cable in ground at 750mm depth including excavation and refilling of earth and providing protection with sand and bricks on top and sides,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Varsha.
100
-
95
BOLLARDS SYSTEM
-
-
-
Supply ,Installation and commissioning of Retractable K4 crash rated bollards using Hydraulic blocking with speed control, Shall be reliable in operation even after power failure, weld free bollard cylinder, auto wiping arrangement, low maintenance and can be operated with remote control switch. The system shall be with all fixing accessories including civil works. Note : 850mm(H), 275mm (D), Impact load 303 KN, Crash Rating-K4, Wheel Load : 100 KN Vertically , Raising & Lowering time : 5-6 Sec .One Single mechanism for operating set of minimum 4 bollards at a time ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Faac/Godrej/Brosis/Cane
1
-
3460316
BUILDING MANAGEMENT SYSTEM- CENTRAL COMPUTER SYSTEM
-
-
-
Supply installation testing and commissioning of Central computer server system with required pre-loaded genuine softwares comprising of Intel Xeon Quad / Hexa core processor with 8 / 16 GB RAM, 1 TB HDD, 0.1, Gigabit NIC, WIN 2008 std OS 21" TFT colour monitor, Multi fuction key board, network adapter etc graphical interface software with multi tasking enviorment, mouse, serial & parellel ports, gateway card, real time clock with battery back-up, connecting card, communication card, network adapter as expalined above,,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HP/DELL
1
-
371268
Supply installation testing and commissioning of Laser A4 color printer for printing reports complete with communication cable, power cable, printer driver software etc,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: HP/Canon/EPSON
2
-
41841
B M S SOFTWARE :
-
-
-
Supply installation testing and commissioning of BMS Software including of client software required with complete monitoring and control applications, graphics screens and to generate all management information systems (MIS) reports It shall be operable via internet / TCP IP by at least 4 user licenses. The software shall include the energy data management system module with report generation and be compatible to work and take inputs from any given equipment.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
625800
Supply installation testing and commissioning of E-facility maintenance management Software module required for facility application with complete monitoring and control applications, pop up for PMS ( Preventive Maintenance service Module ) of the run status of the equipments, shall be able to schedule the hrs of running of different equipments etc. The Facility management software shall be able to generate reports on PMS, shall be able to send SMS to atleast 3-4 persons so as to enable the facility / BMS operators to take preventive actions etc.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
783781
Commissioning charges for GUI SOFTWARE screens development, with dash board application with graphical representation analysis capable of showing the energy consumption, Temperature distribution corelation etc as per RTC ( real time clock) .,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
29994
Supply installation testing and commissioning of Ethernet switches required for connectivity of various DDC's and other related equipments. Including weather proof Enclosures, Vendor to calculate with the IO summary given in the document.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: D Link/Legrand/Honeywell or its equivalent.
1
-
211460
Supply of Portable Operating Terminal for Programming Purpose,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Legrand or its equivalent
1
-
44878
INTEGRATION OF FOLLOWING SYSTEMS ON BACNET / MODBUS with required Hardware (integrators/ Converters), software and Developing the customized graphics screens a) Chiller Plant Manager b) Integration of Energy Meters c) Integration of Load Managers d) Integration of UPS e) Integration of Lift Panel ( Lifts- 6 Nos) g) Integration of VFD's of AHU's (15 Nos) h) Integration of Basement Ventilation Jet fans (60 Nos)- PLC for Basement 1 & 2, i) Integration of BTU meters j) Integration of KW transducers, k) Integration of FAS along with GUI software l) Any other soft integrations ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell
1
-
735718
DDC CONTROLLER IP BASED WITH REQUIRED PANEL ENCLOSURE, BATTERY BACK UP AND CONTROL WIRING ETC.
-
-
-
Supply installation testing and commissioning of DDC Controller for HVAC CHILLERS & PUMPS ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI ( AI – 20, AO – 04 , DI – 56, DO – 20 )
1
-
441954
Supply installation testing and commissioning of DDC Controller for HVAC AHU SYSTEM IN FLOORS ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
( AI – 136, AO – 15 , DI – 135 , DO – 60 )
1
-
2160222
Supply installation testing and commissioning of DDC Controller for Pressurisation and Basement fans.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
( AI –00, AO – 00 , DI – 74 , DO – 74 )
1
-
389736
Supply installation testing and commissioning of DDC Controller for Fire Fighting System ( AI - 0, AO - 0 , DI – 8 , DO – 0 ) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
146655
Supply installation testing and commissioning of DDC Controller for Electrical Mgmt System ( AI -6, AO - 0 , DI –408 , DO – 2 ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
1313999
Supply installation testing and commissioning of DDC Controller for Water Management System ( AI - 4, AO - 0 , DI – 56 , DO –00 ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson Controlls/Delta Controlls/JCI/UTI
1
-
311728
Supply installation testing and commissioning of Ductable type Combined Temperature & RH Sensors (Supply / Return Air Ducts ) for AHU's. ( 15 NO'S ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /JCI
30
-
10384
Supply installation testing and commissioning of Combined Temperature & RH Sensors for hub room 36 NO's , server room 1 NO's = 37 NO's ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /JCI
37
-
13745
Supply installation testing and commissioning of Filter Differential Pressure Switches ( Pre filter, Fine filter for 15 nos for AHU's + fine filters ) = 15*2 =30 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /JCI
30
-
5874
Supply installation testing and commissioning of Differential Pressure Switches for fan status of AHU's - 15, Pressurisation fans-4, Toilet fans-44, Basement exhaust-12, Basement Fresh Air-12 = 87 nos ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /JCI
87
-
2932
Supply Installation testing and commissioning of IAQ Sensors ( 15 No's at AHU Rooms) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /JCI
15
-
31719
Supply installation testing and commissioning of Out Side Air T&RH Sensor and Shall be weather proof type,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell or its equivalent
1
-
11449
Supply installation testing and commissioning of Floating type Level transmitters for 01 overhead tanks ,03 sumps and 5 drain pits.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Filpro
9
-
19170
Supply installation testing and commissioning of Flow Switches for the plumbing,fire fighting pumps & chillers ( 17 + 4+ 8 = 29 ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /Omicrom
29
-
3402
Supply installation testing and commisioning of Hooter with relay along with float sensor for muncipal water sumps for alarm purpose (To be customised locally ).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /Omicrom
1
-
19923
Supply installation testing and commissioning of flame proof Level transmitters for 03 no of HSD tanks of DG's.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Honeywell/Jhonson /Omicrom
3
-
24789
Supply and laying of 4 Core 1 sqmm armoured multistranded cable with required accessories in complete. ( shall be on actuals ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Caliplast/Varsha
1000
-
110
Supply and laying of 2 Core 1 sqmm unarmoured multistranded PVC flexible cable ( shall be on actuals ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Caliplast/Varsha
10000
-
33
Supply and laying of 4 Core 1 sqmm unarmoured multistranded PVC flexible cable ( shall be on actuals),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Caliplast/Varsha
5000
-
48
Supply and laying of 4 Core 1 sqmm unarmoured multistranded shielded twisted overall PVC cable ( shall be on actuals),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Surabhi/Polycab/Caliplast/Varsha
4500
-
58
Supply & laying of CAT 6 twisted cable for connecting of all DDC's to router and system ( shall be on actuals),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Legrand/D link
1500
-
25
Supply, Installation, Testing & commissioning of cable trays and providing closed type GI wire way complete with all supports, bends, tees, fittings & accessories of the following sizes150 x 50 x 50 mm ( qty may vary as per site condition ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
1088
Supply and laying of 32 mm FRLS PVC conduits along with all fixing accessories with base plates for the total qty of conduits ( shall be on actuals ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Sudhakar/Universal/VIP
3800
-
78
Supply and laying of 32 mm PVC Flexible conduits along with all fixing accessories with base plates for the total qty of conduits ( shall be on actuals ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Sudhakar/Universal/VIP
50
-
55
Supply and laying of 25 mm FRLS PVC conduits along with all fixing accessories with base plates for the total qty of conduits ( shall be on actuals ) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Sudhakar/Universal/VIP
6500
-
60
Supply and laying of 25 mm PVC Flexible conduits along with all fixing accessories with base plates for the total qty of conduits ( shall be on actuals ) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:Sudhakar/Universal/VIP
50
-
37
BUILDING ENERGY MANAGEMENT SYSTEM ( BEMS )
-
-
-
Supply installation testing and commissioningHP ProLiant ML150 Gen9, 1 no x Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor 16 DiMM Slots, 2 no's x HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit,4 LFF (3.5inch) Hot Plug SATA, Dynamic Smart Array B140i Controller,2 no's x HP 1TB 6G SATA 7.2k 3.5in SC MDL HDD,DVD RW, 1 no x 800W/900W Gold Hot Plug Power Supply,Ethernet 1Gb 2--port 5717 Adapter, HP iLO (Firmware: HP iLO 4) with 2GB NAND, SQL Server 2012 std edition, 22” Monitor, MS Office Std 2013, Win Svr Std 2012R2 with 3 yrs on site warranty. The system shall be preloaded with required OS and office licenced softwares.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:HP/DELL
1
-
465404
Supply and commissioning of Billing software suitable for Electric meters mentioned below.This shall include control applications, graphics, it shall generate all logs reports, Alerts , template preparation, billing option and provision per day / week / month / year basis.The software licence shall be for 200 Nodes . ( DEM-121 + LM -16 + 22 BTU meters = 159 METERS IN TOTAL ),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Triton
1
-
352434
Supply Installation testing and commissioning of 10/100, 16 port Ethernet switches for integration of the electrical,BTU meters.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:D Link/Triton
2
-
5287
Supply Installation testing and commissioning of RS 485 Ethernet convertors / Gateway required for ENERGY Meters ( @ 25 meters per convertor).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:D Link
8
-
128326
Supply installation testing and commissioning ofconnector kits for securing the meters ( wago connecting kits ) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
159
-
385
Supply Installation of MS Panel of size 800 x 800mm with IP 65 (weather proof) suitable for the installation of Ethernet Switches of ENERGY meter system modules, power supply modules all included along with all fixing accessores.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
21146
Supply and laying of 25mm PVC conduits , 2 mm thick with all required clamps, glads, fixing material accessores etc - shall be on actuals.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Sudhakar/Universal/VIP
350
-
60
Supply and laying of 25mm PVC flexible conduits . - shall be on actuals.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Sudhakar/Universal/VIP
160
-
37
Supply and laying of Beldon cable for connecting of ENERGY meter modules to the system -shall be on actuals.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Beldon,
500
-
148
Supply, Laying, testing and commissioning of CAT 6 cable laid in existing 25mm dia heavy gauge PVC conduit along with all fixing accessories .,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
92
Supply and installation of junction boxes ( min 3-4 meters/ junction box in a shaft),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
40
-
5421
Supply and laying of 3 core 1.5sqmm armoured cable with all fixing accessories - shall be on actuals ( for looping of power supply to all the panels).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Surabhi/Varsha/Polycab
75
-
102
Supply, installation, testing and commissioning of online UPS of 1 KVA capacity with 15 minutes battery back up, shall include all interconnecting cables.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:APC/Emmerson
1
-
53923
Supply and Installation of IT wall Mountable Switch 6 U Rack suitable for the Installation of Switches, power Supply modules all included along cooling fans with all fixing accessories.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:Netrack/Valrack
1
-
5566
LIFTS:
-
-
-
Supply and installation of 1 No. 20 Passenger Machine room less elevator with13 stops with a speed of 1.5 Meters per second and with below specification. 1 Type Passenger Elevator,2 Elevator Model Machine Room Less Elevator (MRL),3 No of Units 01 No,4 Passenger Capacity & Load- 20 & 1360 kgs 5 Speed 1.5 MPS,6 .Floor Levels-13,7 Travel 53.4 Mts Approx 8 Stops & Openings 13 Stops, 13Openings (All Openings on the Same Side),9 Power Supply 415 Volts, 3 Phase 50 Hz 10 Machine Type-Gearless,11 Head room Height required (Min) 4800 mm 12 Lift Pit Depth required (Min) 1600 mm, 13 Car and Landing Door Size 1100mm wide x 2100mm high
14 Car and Landing Door Type Centre Opening Power Doors 15Car Dimensions 1800mm wide x 2400mm highX1700mm Depth 16 Car finishes All panels Stainless Steel Hairline Finish 17 Handrail Round Tubular handrail on rear side 18 False Ceiling with Light fixtures Stainless Steel Hairline Finish LED model with blower type fan and mirror on rare car panel,19 Standard Features,Emergency Alarm & Light,Full Length Infra-Red Door protection Fireman Drive.,Load Weighing Device (LWD),Intercom-2 way,Car Door Lock,Segmented Display in the COP & LOP with KDS 300 Buttons The cost includes conveyance of all materials to site, all opertaional and incidental charges, all labour charges, overheads & contractors profit etc., all taxes, except GST, complete for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make:Kone/Schindler/OTIS/Johnson/Hitachi
6
-
4236492
AV System
-
-
-
Supply, Installation, testing and commissioning of 2.5" Satellite pendant speaker, 16Ω, 150° conical coverage, includes cable and fastener for suspended installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
9885
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil pendant subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes cable and fasteners for suspended installation.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
41185
Supply, Installation, testing and commissioning of 2.5" Satellite pendant speaker, 16Ω, 150° conical coverage, includes cable and fastener for suspended installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
9885
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil pendant subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes cable and fasteners for suspended installation.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
41185
Supply, Installation, testing and commissioning of 2.5" Satellite pendant speaker, 16Ω, 150° conical coverage, includes cable and fastener for suspended installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
9885
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil pendant subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes cable and fasteners for suspended installation.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
41185
Amplifier ,DSP ,Touch Control ,UTI License
-
-
-
Supply, Installation, testing and commissioning of Amplifier -800W FlexAmp technology Hi-Z / Lo-Z amplifier, 4 x 200W into 4Ω, 8Ω, 70V and 100V, Highpass filter per channel, GPIO for Remote Standby and Amp Status,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
135088
Supply, Installation, testing and commissioning of Unified Series Core with 24 local I/O channels, 128x128 network I/O channels, dual LAN ports, telephone POTS, 16x16 GPIO, 16 AEC channels, 1RU,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
280061
Supply, Installation, testing and commissioning of Q-SYS 5.5” PoE Touch Screen Controller for In-Wall Mounting. Includes 1 LAN Port and Aux Power input, available in black only,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
14003
Supply, Installation, testing and commissioning of Q-SYS Core 110 UCI Deployment Software License, Perpetual,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
14003
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
Second Floor
-
-
-
Sub: Proposal for Sound Reinforcement Systems
-
-
-
Second Floor Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 4" Full-range ceiling speaker, 70/100V transformer with 8 Ω bypass, 140° conical coverage, includes C-ring and rails for blind mount installation.Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
9061
Supply, Installation, testing and commissioning of 4" Full-range ceiling speaker, 70/100V transformer with 8 Ω bypass, 140° conical coverage, includes C-ring and rails for blind mount installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
9061
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
51070
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
Third Floor
-
-
-
Third Floor Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 4" Full-range ceiling speaker, 70/100V transformer with 8 Ω bypass, 140° conical coverage, includes C-ring and rails for blind mount installation.Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
9061
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
51070
Speakers Systems for 15 Seater
-
-
-
Supply, Installation, testing and commissioning of 4" Full-range ceiling speaker, 70/100V transformer with 8 Ω bypass, 140° conical coverage, includes C-ring and rails for blind mount installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
9061
Speakers Systems for 15 Seater
-
-
-
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
51070
Speakers Systems for Breakout Areas & Board Room FOH
-
-
-
Supply, Installation, testing and commissioning of 2.5" Satellite pendant speaker, 16Ω, 150° conical coverage, includes cable and fastener for suspended installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
9885
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil pendant subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes cable and fasteners for suspended installation. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
41185
Supply, Installation, testing and commissioning of 2.75" Full-range (x16) element column surface speaker, 70/100V transformer with 8 Ω bypass, 150° horizontal x selectable 15/30° vertical coverage, includes pan/tilt wall mount and input weather input cover. Color - White. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
84018
Amplifier -FOH
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo Operation 200 watts into 8 Ω & 4 Ω, Bridged operation 400 watts into 8Ω & 4Ω, and 350 watts into 70v and 100v / 100-240 VAC Operation ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
59307
Ceiling Speakers for Board Room
-
-
-
Supply, Installation, testing and commissioning of 6" Two-way ceiling speaker, 70/100V transformer with 8 Ω bypass, 110° conical coverage, includes C-ring and rails for blind mount installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
12191
Amplifier for Ceiling Speaker
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 4 Channel ENERGY STAR amplifier / Multichannel operation 60 watts into 8 Ω & 4 Ω, Bridged pair operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74134
QSC PTZ Camera- For Board Room / 15 Seater ZOOM VC - Option-I
-
-
-
Supply, Installation, testing and commissioning of Q-SYS PoE -PTZ Camera for AV-to-USB Bridging 20x Optical Zoom 60° horizontal field of view. For medium to large conference rooms. Includes Lan, 3G-SDI and HDMI ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
477751
Logictech PTZ Camera- For Board Room /15 Seater ZOOM VC - Option-II
-
-
-
Supply, Installation, testing and commissioning of PTZ -LOGITECH RALLY CAMERA ONLY-4K Camera, 15X Zoom ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
154051
Logictech PTZ Camera- For CEO Room / 8 Seater ZOOM VC -
-
-
-
Supply, Installation, testing and commissioning of LOGITECH RALLY KIT-Sound Bar with Built in Camera & Mic full Audio, Video and Mic(Full setup),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
288792
DSP ,Touch Control ,UTI License
-
-
-
Supply, Installation, testing and commissioning of DSP-Unified Series Core with 24 local I/O channels, 128x128 network I/O channels, dual LAN ports, telephone POTS, 16x16 GPIO, 16 AEC channels, 1RU,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
280061
Supply, Installation, testing and commissioning of Touch Controller-Q-SYS 7" PoE touchscreen controller for table mounting - includes dual LAN, USB OTG and an AUX Power Input.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
172979
Supply, Installation, testing and commissioning of UCI license Q-SYS Core 110 UCI Deployment Software License, Perpetual,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
14003
GYM Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 2.5" Satellite ceiling speaker, 16Ω, 150° conical coverage, includes C-ring for blind mount installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
8237
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil ceiling subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes C-ring and Tile rails for blind mount installation. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
39538
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 400W FlexAmp technology Hi-Z / Lo-Z amplifier, 2 x 200W into 4Ω, 8Ω, 70V and 100V, Highpass filter per channel, GPIO for Remote Standby and Amp Status,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
79076
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
Fourth Floor
-
-
-
Sub: Proposal for Sound Reinforcement Systems
-
-
-
Fourth Floor Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 4" Full-range ceiling speaker, 70/100V transformer with 8 Ω bypass, 140° conical coverage, includes C-ring and rails for blind mount installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
12
-
9061
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
74134
Break Out Area Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 2.5" Satellite pendant speaker, 16Ω, 150° conical coverage, includes cable and fastener for suspended installation. Priced individually but must be purchased in pairs.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
9885
Supply, Installation, testing and commissioning of 6.5" Dual voice-coil pendant subwoofer, provides High-pass output for up to four (4) satellite speakers, 70/100V transformer with 4Ω bypass, includes cable and fasteners for suspended installation. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
41185
Amplifier
-
-
-
Supply, Installation, testing and commissioning of 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 100v / 100-240 VAC Operation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
51070
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
Fifth Floor-Event Space
-
-
-
Sub: Proposal for Sound Reinforcement Systems
-
-
-
Fifth Floor Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of 1000W active portable loudspeaker system; 12-inch woofer; 1.0-inch compression driver; 75 degree conical waveguide; pole socket; selectable user contours. For use as main or stage monitor. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
49423
Supply, Installation, testing and commissioning of 2000W active, Ultra-Compact subwoofer; 12-inch woofer; 4 large, swivel casters; dual M20 threaded pole socket; optional speaker 36" pole accessory (SP-36). ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
93903
Supply, Installation, testing and commissioning of 1000W active portable loudspeaker system; 12-inch woofer; 1.0-inch compression driver; 75 degree conical waveguide; pole socket; selectable user contours. For use as main or stage monitor.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
49423
Supply, Installation, testing and commissioning of 2000W active, Ultra-Compact subwoofer; 12-inch woofer; 4 large, swivel casters; dual M20 threaded pole socket; optional speaker 36" pole accessory (SP-36). ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
93903
Supply, Installation, testing and commissioning of 1000W active portable loudspeaker system; 12-inch woofer; 1.0-inch compression driver; 75 degree conical waveguide; pole socket; selectable user contours. For use as main or stage monitor.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
49423
Supply, Installation, testing and commissioning of 2000W active, Ultra-Compact subwoofer; 12-inch woofer; 4 large, swivel casters; dual M20 threaded pole socket; optional speaker 36" pole accessory (SP-36). ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
93903
Supply, Installation, testing and commissioning of Speaker mount bracket-Powder coated steel yoke for mounting the CP12 vertically or horizontally to structures.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
11532
DSP ,Touch Control ,UTI License
-
-
-
Supply, Installation, testing and commissioning of DSP-Unified Series Core with 24 local I/O channels, 128x128 network I/O channels, dual LAN ports, telephone POTS, 16x16 GPIO, 16 AEC channels, 1RU,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
280061
Supply, Installation, testing and commissioning of Touch Controller-Q-SYS 5.5” PoE Touch Screen Controller for In-Wall Mounting. Includes 1 LAN Port and Aux Power input, available in black only,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
108730
Supply, Installation, testing and commissioning of Q-SYS Core 110 UCI Deployment Software License, Perpetual,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
14003
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
OUT DOOR PORTABLE SPEAKERS
-
-
-
Out Door Portable Speakers Systems
-
-
-
Supply, Installation, testing and commissioning of The LSP 500 PRO is a wireless two-way audio system for professional use. Battery powered,It has been designed to address audiences at indoor and outdoor events without the need of any power or audio cables,• Wireless control for up to 20 LSP 500 PRO via iPad or Windows device,• Integrated Bluetooth audio streaming,Mixing function for-up to 3 wireless microphones,USB player-Dimensions (W x H x D) 290 x 550 x 320 mm
Output power-55 W continuous,120 W peak ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
243136
Supply, Installation, testing and commissioning of Tripod Stand,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
15906
Wireless (Head Worn & Hand held) Mics
-
-
-
Supply, Installation, testing and commissioning of Versatile wireless Head worn systems,For hands-free operation during performances and speeches: Robust bodypack transmitter and feedback resistant headmic ME 3-II with high speech intelligibility for daily use on stage.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
70328
Supply, Installation, testing and commissioning of Versatile wireless Hand held systems,State-of-the-art live sound featuring Sennheiser‘s renowned e 835, e 845 and e 865 capsules on a lightweight aluminum transmitter with integrated mute switch.True diversity half-rack receiver in a full-metal housing
with intuitive LCD display for full control
• Easy and flexible wireless synchronization between
transmitter and receiver via infrared
• Fast frequency allocation for up to 12 receivers via new Linking Functionality,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
60102
BOARD ROOM AUTOMATION & CONTROL
-
-
-
BOARD ROOM AUTOMATION Processor
-
-
-
Supply, Installation, testing and commissioning of 3-Series Control System®,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
344435
CRESTRON Retractorable Cables Cable Cubby
-
-
-
Supply, Installation, testing and commissioning of FlipTop™ FT2 Series, 700 Size, Electrical, Black,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
92733
Supply, Installation, testing and commissioning of AC Power Outlet Module for FT2 Series, Single, Universal Outlet, IEC,C14 Inlet,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
14693
Supply, Installation, testing and commissioning of USB Rapid Charging Module for FT2 ELEC Series, USB Type-C & Type-A,High Power Charging Ports, Bus Powered,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
33239
Supply, Installation, testing and commissioning of One-Touch Cable Retractor for FT2 ELEC Series, HDMI® to HDMI, 10.2Gbps,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
72982
Supply, Installation, testing and commissioning of One-Touch Cable Retractor for FT2 ELEC Series, HD15 male to HD15,male, VGA, 1080p,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
66238
Supply, Installation, testing and commissioning of One-Touch Cable Retractor for FT2 ELEC Series, 3.5mm Mini-TRS Plug to,3.5mm Mini-TRS Plug, Stereo Audio,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
66238
Supply, Installation, testing and commissioning of One-Touch Cable Retractor for FT2 ELEC Series, RJ-45 to RJ-45, CAT6,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
66238
Supply, Installation, testing and commissioning of CRESTRON Wireless Presentation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
238455
AirMedia® Presentation System 200
-
-
-
CRESTRON 10.1 Inch Touch Panel
-
-
-
Supply, Installation, testing and commissioning of 10.1 in. Touch Screen without Camera, Microphone, or PinPoint™ Beacon;Black Smooth,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
317940
Supply, Installation, testing and commissioning of PoE Injector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
13248
Supply, Installation, testing and commissioning of Tabletop Kit for TSS-10 and TSW-1060, Black Smooth,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
33239
CRESTRON Interactive & Anotation
-
-
-
Supply, Installation, testing and commissioning of Digital Graphics Engine 200 with 4K DM 8G+® Input,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
423920
CRESTRON Meeting Room Scheduler
-
-
-
Supply, Installation, testing and commissioning of 10.1 in. Room Scheduling Touch Screen, Black Smooth, With Multisurface,Mount Kit and Room Availability Light Bar,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
251703
CRESTRON Digital Signal Processor
-
-
-
Supply, Installation, testing and commissioning of Crestron Avia™ 12x8 Digital Signal Processor w/Dante™, USB Audio,AEC, & Audio Conferencing Interface,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
529900
CRESTRON DigitalMedia Switcher
-
-
-
Supply, Installation, testing and commissioning of 16x16 DigitalMedia™ Switcher,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1139286
Supply, Installation, testing and commissioning of DigitalMedia 8G+® 4K60 4:4:4 HDR Input Card for DM® Switchers,HDBaseT® Compatible,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
145723
Supply, Installation, testing and commissioning of HDMI® 4K60 4:4:4 HDR Input Card for DM® Switchers,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
105980
Supply, Installation, testing and commissioning of 2-Channel HDMI® 4K60 4:4:4 HDR Scaling Output Card for DM®Switchers,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
238455
Supply, Installation, testing and commissioning of DigitalMedia 8G+® 4K60 4:4:4 HDR Transmitter 202,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
198713
Supply, Installation, testing and commissioning of 4K DigitalMedia 8G+® Transmitter 302,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
264950
Supply, Installation, testing and commissioning of 2-Channel DigitalMedia 8G+® 4K60 4:4:4 HDR Output Card for DM®Switchers,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
172218
Supply, Installation, testing and commissioning of Crestron® Certified HDMI® Interface Cable, 18 Gbps, 6 ft (1.8 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
6744
Supply, Installation, testing and commissioning of Crestron® Certified HDMI® Interface Cable, 18 Gbps, 20 ft (6.1 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
13248
Supply, Installation, testing and commissioning of Crestron Flex C160-T – UC Video Conference System Integrator Kit for
Microsoft Teams® Rooms,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
821346
Supply, Installation, testing and commissioning of HD-SCALER-VGA-E,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
79485
Supply, Installation, testing and commissioning of IPAD LICENSE (Not Included Ipad),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
85211
Supply, Installation, testing and commissioning of PROGRAMMING CHARGES,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
198826
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of EAGLE HDMI 4K CABLE (20MTRS) (Based on Site condition are changed) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
31259
Supply, Installation, testing and commissioning of EAGLE/AUDIO QUEST HDMI INTERCONNECT CABLE (2MTRS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
8931
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
RECEPTION AREA AUTOMATION & CONTROL
-
-
-
Video
-
-
-
Supply, Installation, testing and commissioning of Passive Wall Plate - HDMI,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
10169
Supply, Installation, testing and commissioning of 4x1 4K60 4:2:0 HDMI Auto Switcher with Audio Qty 1,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
85935
Supply, Installation, testing and commissioning of Media Player,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
60784
Reception Area AUTOMATION Processor
-
-
-
Supply, Installation, testing and commissioning of 3-Series Control System®,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
238455
CRESTRON Encoder / Decoder
-
-
-
Supply, Installation, testing and commissioning of DM NVX™ 4K60 4:4:4 HDR Network AV Encoder/Decoder,Crestron Avia™ 8x6 Digital Signal Processor,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
238455
Supply, Installation, testing and commissioning of Crestron Avia™ 8x6 Digital Signal Processor,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
264950
CRESTRON 7 Inch Touch Panel
-
-
-
Supply, Installation, testing and commissioning of 7 in. Touch Screen without Camera, Microphone, or PinPoint™ Beacon;
Black Smooth,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
185465
Supply, Installation, testing and commissioning of PoE Injector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
13248
Supply, Installation, testing and commissioning of Tabletop Kit for TSS-10 and TSW-1060, Black Smooth,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
26495
Supply, Installation, testing and commissioning of IR Emitter Probe w/Terminal Block Connector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
6744
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of EAGLE HDMI 4K CABLE (20MTRS) (Based on Site condition are changed) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
31259
Supply, Installation, testing and commissioning of EAGLE/AUDIO QUEST HDMI INTERCONNECT CABLE (2MTRS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
8931
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
EVENT SPACE AUTOMATION Control System
-
-
-
Supply, Installation, testing and commissioning of 3-Series Control System®,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
344435
CRESTRON HD Scaling Auto Switcher
-
-
-
Supply, Installation, testing and commissioning of DM Lite – HD Scaling Auto-Switcher & HDMI® over CATx Extender 300
w/Wall Plate Transmitter, Black,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
198713
Supply, Installation, testing and commissioning of 2-Gang Decorator Style Faceplate for HD-MD-300-C-E and DM-TX-
200-C-2G Series, Black Textured,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
2650
CRESTRON Wireless Presentation
-
-
-
Supply, Installation, testing and commissioning of AirMedia® Presentation System 200,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
238455
CRESTRON Encoder / Decoder
-
-
-
Supply, Installation, testing and commissioning of DM NVX™ 4K60 4:4:4 HDR Network AV Encoder/Decoder,Crestron Avia™ 8x6 Digital Signal Processor,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
238455
Supply, Installation, testing and commissioning of DigitalMedia™ 4K60 4:4:4 HDR Network AV Encoder,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
172218
Supply, Installation, testing and commissioning of DigitalMedia™ 4K60 4:4:4 HDR Network AV Decoder,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
172218
Supply, Installation, testing and commissioning of Crestron® Certified HDMI® Interface Cable, 18 Gbps, 6 ft (1.8 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
12
-
6744
Supply, Installation, testing and commissioning of Crestron® Certified Computer VGA Interface Cable w/Audio, 6 ft,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
5299
CRESTRON 10.1 Inch Touch Panel
-
-
-
Supply, Installation, testing and commissioning of 10.1 in. Touch Screen without Camera, Microphone, or PinPoint™ Beacon;Black Smooth,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
317940
Supply, Installation, testing and commissioning of PoE Injector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
13248
Supply, Installation, testing and commissioning of Universal Mounting Bracket for TSS-7, TSS-10, and TSW-x60 Series,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
5299
CRESTRON ENCODER / DECODER FOR INTERACTIVE DISPLAY
-
-
-
Supply, Installation, testing and commissioning of DigitalMedia™ 4K60 4:4:4 HDR Network AV Decoder,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
172218
Supply, Installation, testing and commissioning of DigitalMedia™ 4K60 4:4:4 HDR Network AV Encoder,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
172218
Supply, Installation, testing and commissioning of Digital Graphics Engine 100,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
264950
Supply, Installation, testing and commissioning of Crestron® Certified HDMI® Interface Cable, 18 Gbps, 6 ft (1.8 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
6744
Supply, Installation, testing and commissioning of 21.5” HD Touch Screen Display, Black,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
264950
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of EAGLE/CARARE SPEAKER CABLE SPK 14 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
70
-
233
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 16 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
163
Supply, Installation, testing and commissioning of EAGLE/CANARE SPEAKER CABLE SPK 14 (Depends on site condition),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
233
Supply, Installation, testing and commissioning of EAGLE HDMI 4K CABLE (20MTRS) (Based on Site condition are changed) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
31259
Supply, Installation, testing and commissioning of EAGLE/AUDIO QUEST HDMI INTERCONNECT CABLE (2MTRS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
8931
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
EVENT SPACE AUTOMATION & CONTROL with EXTRON
-
-
-
EVENT SPACE AUTOMATION Control System
-
-
-
Supply, Installation, testing and commissioning of 10" Tabletop TouchLink Pro Touchpanel-Black - Tabletop (Master Panel),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
341063
Supply, Installation, testing and commissioning of Power Injector for TouchLink Pro Touchpane,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
35407
Supply, Installation, testing and commissioning of eBUS Button Panel with 10 Buttons - US 3-Gang (Side Rooms x 2),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
67201
EXTRON Matrix Switcher ,Streaming Server & Interface
-
-
-
Supply, Installation, testing and commissioning of 8x6 Seamless 4K Scaling Presentation Matrix Switcher-The Extron DTP CrossPoint 86 4K is an 8x6 matrix switcher with HDMI and DTP® inputs and outputs, 4K scaling, audio DSP with AEC, an integrated audio power amplifier, and a built‑in IPCP Pro control processor. It provides complete system integration for large AV systems in a 3U enclosure, supporting applications requiring several displays, sound reinforcement, and AV system control.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1881146
Supply, Installation, testing and commissioning of Long Distance DTP Transmitter for HDMI-HDMI Tx - 230 feet (70 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
57446
Supply, Installation, testing and commissioning of Long Distance DTP Receiver for HDMI-HDMI Rx - 230 feet (70 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
57446
Supply, Installation, testing and commissioning of Two Input DTP Transmitter for DisplayPort and HDMI with Audio Embedding - Decorator-Style Wallplate, Black – 230 feet (70 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
145482
Supply, Installation, testing and commissioning of Two Input DTP Transmitter with Audio Embedding for Floor Boxes- - 230 feet (70 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
206541
Supply, Installation, testing and commissioning of H.264 Streaming Media Processor-Standard Version – 80 GB SSD,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
585540
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of Shielded Twisted Pair Cable for XTP Systems and DTP Systems-Non-Plenum 1000' (305 m) spool,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
145482
Supply, Installation, testing and commissioning of Shielded RJ-45 Plug Kit for Extron XTP DTP 24 Shielded Twisted Pair Cable-XTP DTP 24 Plug, Package of 10,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
6142
Supply, Installation, testing and commissioning of Ultra Flexible Premium High Speed HDMI Cables-6' (1.8 m) 4K Premium,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
17
-
8551
Supply, Installation, testing and commissioning of Ultra Flexible DisplayPort Cables,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
8551
Supply, Installation, testing and commissioning of Male to Male 15-pin HD Micro HR with Audio Cables-6' (1.8 m),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
6865
Supply, Installation, testing and commissioning of Ultra Flexible Premium High Speed HDMI Cables-9' (2.7 m) 4K Premium,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
9875
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Supply, Installation, testing and commissioning of 9U Rack,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
39765
Supply, Installation, testing and commissioning of FURMAN ELITE 16EI POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
74345
Supply, Installation, testing and commissioning of POWER CABLES FOR FURMAN POWER CONDITIONER,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
800
Lutron Dimming Modules
-
-
-
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 22W, 2300 lumens, 1200mm length T5 LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: 2KV, THD10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
36811
Supply, Installation, testing and commissioning of Lutron DALI power module, 2 loops with 64 ballasts eachLED 22 W LED LINEAR Architectural LIGHT CEILING MOUNT:- Body Material : Extruded Aluminium -6063 with powder- coating Diffuser : PMMA diffuser L-1135mm,W-60,h-80mm Body Color : White, Silver, BlackFixed/Adjustable : Fixed Light Source : SMD 2835Beam Angle : 103.2˚ Color Temperature : 3000K, 4000KCRI : ≥80 Power Factor : 0.9 Ingress Protection : IP20Driver : Constant Current Input Voltage : 220-240V/50-60Hz
Dimming Options : Triac, 0-10V, DALI Mounting Arrangement: Surface mounted /suspended kit
Life Time : 50000hrs,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
87029
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 36 w Back lit, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high
efficiency acrylic wide diffuser, with wide operating voltage range,Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
35
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zonehousing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zone7 LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zone36W LED DOWN LIGHT ROUND : 1.Module structure, adapted to different LED light source and beam angles. 2. Different colors and anti-glare designs of reflectors for choice, realizing spot, flood or wallwasher lighting effect. 3. Patented structure design, die cast lamp body, simple but elegant. 4. UGR15 Secondary calculus lens tech, accurate light distribution , pure light spot, multi-anti-glare tech. 5. Various drivers for option, non-flicker, smart control, etc. 6. IP20, IP44 for option.
7. Serialized products with multiple dimensions, and powers ranging from 9 W to 40W. 8. Lifespan up to 50,000 hours,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
50
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 18 W DOWN LIGHT HANGING ROUND SHAPED Customised As per Architectural Design and Aesthethic. E-14 lamp holder.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
12
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 15 W DOWN LIGHT HANGING ROUND SHAPED Customised As per Architectural Design and Aesthethic. E-14 lamp holder.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 15 W HANGING DOWN LIGHT Customised As per Architectural Design and Aesthethic. E-14 lamp holder.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
7
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 15 W SPOT LIGHT 1.Module structure, adapted to different LED light source and beam angles.
2. Different colors and anti-glare designs of reflectors for choice, realizing spot, flood or wallwasher lighting effect.
3. Patented structure design, die cast lamp body, simple but elegant.
4. UGR15 Secondary calculus lens tech, accurate light distribution , pure light spot, multi-anti-glare tech.
5. Various drivers for option, non-flicker, smart control, etc.
6. IP20, IP44 for option.
7. Serialized products with multiple dimensions, and powers ranging from 15 W.
8. Lifespan up to 50,000 hours,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zoneLED 30 W SPOT LIGHT 1.Module structure, adapted to different LED light source and beam angles.
2. Different colors and anti-glare designs of reflectors for choice, realizing spot, flood or wallwasher lighting effect.
3. Patented structure design, die cast lamp body, simple but elegant.
4. UGR15 Secondary calculus lens tech, accurate light distribution , pure light spot, multi-anti-glare tech.
5. Various drivers for option, non-flicker, smart control, etc.
6. IP20, IP44 for option.
7. Serialized products with multiple dimensions, and powers ranging from 30W.
8. Lifespan up to 50,000 hours,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
36811
Supply, Installation, testing and commissioning of Lutron Power module with 4 switched zones, 10A switching capacity per zone18 W LED BOLLARD LIGHT:- HOUSINGDIMMABLE SUPPORT on request.T=60-80um Adhesion of ISO class 1/ASTM class 4B12# Die-casting powder coated aluminum.
PMMASMD3535 type LEDConstant Voltage Input,Constant Current Output-20˚C~40˚C H-800mmXL-110mm,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
36811
Supply, Installation, testing and commissioning of Lutron Phase adaptive DIN module, 10A totalDecorative fixtures for reception & Breakoutout areasHeight 3175 mmHeight varies with the selection of chandelierWidth 2575 mmWattage:- 80W-100W
Housing of Metal Aluminium, with custom finish
high grade PMMA Diffuser,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
61466
Lutron Control Processor,Occupancy Sensors & Accessories
-
-
-
Supply, Installation, testing and commissioning of Lutron Lighting Control Processor,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
128271
Supply, Installation, testing and commissioning of Lutron Low-voltage enclosure for two processors or interfaces,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
88800
Supply, Installation, testing and commissioning of Lutron QS wire landing board (5 connector),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
24
-
7044
Supply, Installation, testing and commissioning of Lutron 3-button with raise/lower, light icons, in AW or BL,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
2943
Supply, Installation, testing and commissioning of Lutron International Frameless Style Plastic Faceplates,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
1295
Supply, Installation, testing and commissioning of Lutron Occupancy Sensor,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
7953
Supply, Installation, testing and commissioning of Lutron Wireless Inputs only, ceiling mount,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
12952
Supply, Installation, testing and commissioning of Lutron 24 VDC DIN rail power supply with wire harnesses, for processor and links 2.5 Amp,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
12
-
27608
Board Room VC Lighting
-
-
-
LED Video Conferencing Lighting
-
-
-
Supply, Installation, testing and commissioning of HighqualityLEDVideoConferenceLight,Power:50W,Extrudedaluminiumbody,CCTTuneablefrom2700-6500K,ProtectionRating:IP20,Inputpower:AC110-230V,50Hz.RFdimmabledriverforindividuallightfixture.Shadowless&camerasensitivelightwithcolorcorrectedLEDsource.HighqualityLEDlighthavingCRI95throughout2700K-6500Kwith110lm/w,camerafriendlywithnogreentone,Instantstart,nohummingsound,IRandUVfreeLight.600x600mmcompatibleforfallceilingpanelinstallation&Lightwithpanandtiltoptions.Flickerfreeandcompatibleupto10,000framespersecond.Beamangle60-90degree(variableaspersealingheight)withdiffuser.Speciallydesignedheatsinkwithaluminiumextrudedchannelsforeffectivepassivecoolingsystem(withoutfan).Highlumenoutput,higherefficiency,energysavingupto60%,Eco-friendlyandhighluminousefficacyandexcellentheatdissipationstructuremakesthislightperfectforvideoconferencing.LEDlamplife50,000,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
491685
Supply, Installation, testing and commissioning of RF remote controller with below options : --ON/OFFcontrol,Linearsmoothdimmingcontrol,CCTcontrol,Groupingoflightsforstandardcontrol,Selection of individual lights for intensity control,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
88800
Supply, Installation, testing and commissioning of CONSULTATION ,DESIGN & INSTALLATION CHARGES,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
65000
Lutron Dimming Modules
-
-
-
Supply, Installation, testing and commissioning of 200WLEDBlinderLight30Degreecompletewith3200KCCTLampsource,DmX512dimmingwith4or8Channelmodes,Blackfinishhousing,IP20protectionhavingStrobeoptionandsmooth dimming, illuminate Stage with uniform light levels,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
50283
Supply, Installation, testing and commissioning of 12x10WLEDParLight5in1BeamAngle25°completewithRGBW10WLampsourcex12Pcs,DmX512dimmingwith9Channel,Blackfinishhousing,IP20protectionhavingSoundControl&MasterSlaveAutoRunMode.illuminatetheIndoorstage with unlimited colour effects .,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
38373
Supply, Installation, testing and commissioning of 100WHighQualityLEDzoomableparcanLightcompletewithCOBLampsource3200KCCTColourtemperature,CRI&TLCIValuesabove90,DmX512dimmingwith2channelcontrol,Beam Angle of 11 to 35 Degree, Black powder coated body.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
43466
Supply, Installation, testing and commissioning of LightfixturemoutingclampcustomizedforsuspendingonfixedbarsonstagemadeupofAluminiumorMSmaterialcomplete with black powder coating matt black finish.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
2215
Supply, Installation, testing and commissioning of LightFixturedualsafetychainmadeupofGIwireropebundledandtwistedtogetherhavingloadbearingcapacityabove 200 Kgs, sleve on the rope.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
2017
Supply, Installation, testing and commissioning of SuspendercumclampsdesignedaspersiteconiditionmadeoutofMSmaterialofsize50x50x6mmwithblackpowdercoatedfinishandthreadedrodofminimum12mmsuitable to hold bar,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
3238
Supply, Installation, testing and commissioning of OnStageFixedLightingBar5.5MtrsLengthStraightasperthedesignmadeoutof40NB48ODMildsteelpipedualbarrel,dualconstructionconnectedwithMSFlatdulypowdercoatedwith matt black texture finish paint,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
23604
Supply, Installation, testing and commissioning of 5.5MtrFOHFixedLightingBarStraightasperthedesignmadeoutof40NB48ODMildsteelpipedualbarrel,dualconstructionconnectedwithMSFlatdulypowdercoatedwithmatt black texture finish.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
153380
Supply, Installation, testing and commissioning of AluminiumTriangulartrussmadewithhighqualityAluminiummaterial,interconnectingstabilitysupports40NBpipesizewith required connecting hardware’s,Size: 5.5 Mtr,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
153380
Supply, Installation, testing and commissioning of PowersystemconsistofDirectdistributionElectricalpanel,havingindividualMCBcontrolfor6outgoingcircuits,IEC10Apowerjunctionbox,InternalEarthingSystemwithcopperbareconductorsallalongthecabletrays,BlackPowdercoatedcabletraysmadeoutofMSSheetfabricatedforasizeof75mmwithperforationforheatdessipationprovidedwithlid,FRLSCopperunarmouredFlexiblecablehaving3Coreeachof1.5 Sq mm size.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
59932
Supply, Installation, testing and commissioning of DmXController24Faderstocontrolatleast96channelswithmastercontrolfader,Scenesavingoption,4SetPatcheditingfunctions,96SetofScenesavingoptions,LCDdisplay,Smoothmovementfaders,Easyaccesskeypads,DmX512protocol,4Directaccesspageswitchingbuttons,Optionalchase&multifunction keys.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
187465
Supply, Installation, testing and commissioning of DimmingsystemconsistofOptoisolatedRDMenabledDmXsplitterunit,4Outputchannels.DimmingInandoutjunctionbox1waywith5PinDmXXLRMale-Femalesocket,DmXMaleFemaleConnectors5PinhavingrubbersheethprotectionforCrossconnectingDmXwiringconnections&MaleTerminationConnector5Pin.5CoreDmXCablewithSheathedhousingonthe cable, low noise suitable to transmet DmX signal.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
85723
Board Room 32 PAX -Conference Mic Systems
-
-
-
SENNHEISER Tile Ceiling Mics
-
-
-
Supply, Installation, testing and commissioning of Team Connect Ceiling 2 Microphone,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
544216
Supply, Installation, testing and commissioning of POE Injector or POE Switch,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
9657
Supply, Installation, testing and commissioning of DSP with Eight (8) user-configured, field-swappable card slots allow customized I/O configurations without limitation, included as standard is 4x4 Dante digital audio networking AEC provides advanced Acoustic Echo Cancellation with latency of up to 250ms (eight channel),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
272153
BEYERDYNAMIC Wired Conference Mics
-
-
-
Supply, Installation, testing and commissioning of Digital Control Unit for up to 100 microphone units,
RJ45 connectors for conference network,
black anodized aluminium tabletop housing,
incl. external switching power supply,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
310419
Supply, Installation, testing and commissioning of Delegate microphone unit, used with Classis GM 31x Q,
GM 115 Q gooseneck microphones, integrated loudspeaker
and adjustable headphone output, RJ45 connectors for
conference network,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
59909
Supply, Installation, testing and commissioning of Chairman microphone unit, used with Classis GM 31x Q,
GM 115 Q gooseneck microphones, integrated loudspeaker
and adjustable headphone output, RJ45 connectors for
conference network,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
62625
Supply, Installation, testing and commissioning of Condenser gooseneck mic (cardioid), black, length 500 mm
(20''), two flexible segments, illumination ring,
5-pin XLR male, without pre-amplifier, used with Quinta MU 2x
and Orbis MU 2x/4x microphone units, windscreen included,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
16
-
11975
Supply, Installation, testing and commissioning of Connecting cable, RJ45 connectors, length 20 m (65 ft.),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
9260
Supply, Installation, testing and commissioning of Connecting cable, RJ45 connectors, length 2.5 m (8 ft.),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
16
-
1636
CABLES & ACCESSORIES
-
-
-
Microphone Cable to be Considered (Based on Site Requirement
-
-
-
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Conference Room 15 PAX -Conference Mic Systems
-
-
-
BEYERDYNAMIC Wired Conference Mics
-
-
-
Supply, Installation, testing and commissioning of Digital Control Unit for up to 100 microphone units,RJ45 connectors for conference network,black anodized aluminium tabletop housing,incl. external switching power supply,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
310419
Supply, Installation, testing and commissioning of Delegate microphone unit, used with Classis GM 31x Q,GM 115 Q gooseneck microphones, integrated loudspeaker
and adjustable headphone output, RJ45 connectors for conference network,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
59909
Supply, Installation, testing and commissioning of Chairman microphone unit, used with Classis GM 31x Q,GM 115 Q gooseneck microphones, integrated loudspeaker
and adjustable headphone output, RJ45 connectors for conference network,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
62625
Supply, Installation, testing and commissioning of Condenser gooseneck mic (cardioid), black, length 500 mm (20''), two flexible segments, illumination ring,
5-pin XLR male, without pre-amplifier, used with Quinta MU 2x
and Orbis MU 2x/4x microphone units, windscreen included,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
11975
Supply, Installation, testing and commissioning of Connecting cable, RJ45 connectors, length 20 m (65 ft.),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
9260
Supply, Installation, testing and commissioning of Connecting cable, RJ45 connectors, length 2.5 m (8 ft.),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
1636
CABLES & ACCESSORIES
-
-
-
Microphone Cable to be Considered (Based on Site Requirement
-
-
-
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Event Space Mic Systems
-
-
-
BEYERDYNAMIC Wireless Mics
-
-
-
Supply, Installation, testing and commissioning of Neckworn Set UHF diversity system, with 9,5" TG 500 single receiver, belt pack transmitter and TG H34 headset (cardioid), pilot tone, scan function, incl. power supply,microphone clamp and batteries,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
86259
Supply, Installation, testing and commissioning of Vocal Set
UHF diversity system, with 9,5" TG 500 single receiver and
dynamic handheld with TG V50 capsule (cardioid),
pilot tone, scan function, incl. power supply,
microphone clamp and batteries,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
74850
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Reception Area (P.A) Mic Systems
-
-
-
BEYERDYNAMIC Wireless Mics
-
-
-
Supply, Installation, testing and commissioning of Condenser gooseneck mic (cardioid), black, length 500 mm (18"), two flexible segments,programmable switch (PTT, PTM, ON/OFF), Braille-marking,switchable illuminated ring, switchable low cut filter,
3-pin XLR male, windscreen included,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
46582
Supply, Installation, testing and commissioning of Flexible shockmount fixture for Classis gooseneck mics with XLR male, black, with check nut,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
8567
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
28404
Interactive Display
-
-
-
Interactive Touch Display
-
-
-
Supply, Installation, testing and commissioning of V-series 65" 4K - V-Series 4K New Generation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
263587
Supply, Installation, testing and commissioning of V-series 75" 4K - V-Series 4K New Generation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
411204
Supply, Installation, testing and commissioning of V-series 86" 4K - V-Series 4K New Generation,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
546201
CABLES & ACCESSORIES
-
-
-
Supply, Installation, testing and commissioning of CONNECTORS & INTERCONNECT CABLES (AUDIO CABLE, XLR CONNECTORS),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
17042
No. of Items :
-
-
-
Rupees Seventy Three Lakhs Sixty Four Thousand Five Hundred Twenty Seven Only
-
-
-
Part-I
-
-
-
Part-II - Seigniorage Charges payable as per actuals
-
-
-
Note :
-
-
-
1) The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit. The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons labour welfare cess, District mineral fund and work insurance and no reimbursement for these will be made. 2)The above rates for finished items of work including cost and convenyance of all requisite materials to site, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc., including all taxes except GST & Seigniorage Charges .
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements