Telangana State Industrial Infrastructure Corporation Limited Tender

CC Road PTC;Supply and fixing of High Performance expansion joint filler board conforming to M.O.S.T " Silfex" Cpcell HD-100 of 25mm thick to a depth of 175mm for expansion joints including hipping clearing the expansion joint groove and pouring bitumen including heating, etc including cost and conveyance of all materials to site, all labour charges etc., as per direction of engineer in charge, complete for finished item of work. Excluding GST.

CC Road PTC;Construction of un-reinforced Plain Cement Concrete M30 grade over a prepared sub base, coarse aggregate (crushed stone well graded hard granite metal of 20mm size as per table 600-3) and fine aggregates (50% River sand, 50% Rock sand) conforming to IS:383, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design with minimum cement content of 350 Kg/Cum laid in alternate panels with approved fixed side formwork of steel channel, wedges, steel plates including levelling the formwork as per drawing, cleaning the surface with air compressor initially and finally, laying and fixing of 125 micron thick approved polythene film made of 100% virgin LDPE, laying and spreading the concrete with sholves, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation to lines and grade, curing of concrete slabs for 14 days including cost, and conveyance of all material to site, all labour charges for all operations, hire and operational charges of all T&P, diversion of traffic etc., complete for finished item of work as per drawing and technical specification. Excluding GST & Seigniorage charges.

CC Road PTC;Plain Cement Concrete (1:4:8) mix using 40mm size hard broken granite metal, coarse aggreagte and fine aggregate (50% River sand 50% Rock sand) including cost and conveyance of all materials to site, machine mixing charges, labour charges, placing in position, levelling, vibrating, curing etc., complete for finished item of work as directed by the Engineer-in-charge, as per technical specification clause No. 2100 of Morth, Excluding GST & Seigniorage charges.