Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Telangana State Industrial Infrastructure Corporation Limited - TSIIC Tender
Civil And Construction
Building Construction
Opening Date23 Oct 2024
Closing Date6 Nov 2024
Tender Amount₹ 29,21,305
Costs
EMD
₹ 30,000Document Cost
Refer DocumentsTender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
553077Tender No
22/CE-II/TGIIC/2024-25, Date:16.10.2024Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Kattedan Building;Clearing and grubbing land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees removal of disposal of unserviceable materials, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as specified by Engineer-in-charge inculding cost and conveyance of all materials, all taxes, all labour charges, all incidental and operational charges etc., complete for finished item of work.
150
4
745.5
Kattedan Building;Earth work excavation for foundations (Manual Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308). Except GST.
50
332
16645.5
Kattedan Building;Excavation in ordinary rock not requiring blasting ? Manual means upto 3m depth including cutting, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections including all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete. Except GST.
50
475
23779.5
Kattedan Building;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry with minimum cement conten of 162 kg/cum including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarry, coarse aggregate, water etc. to site,and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402). Except GST and Seneoirage charges. Under Foundations
16
5325
85215.52
Kattedan Building;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work. (APSS NO.309&310).Except GST.
65
47
3071.25
Kattedan Building;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER/MIXER AT SITE with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarryaggregate, water etc., to site and including other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . Except GST & Seneoirage charges. FOOTINGS
8
12290
98326.96
Kattedan Building;PEDESTALS
3
13144
39432.36
Kattedan Building;PLINTH BEAMS
7
15807
110650.75
Kattedan Building;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER/MIXER AT SITE with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarry aggregate, water etc., to site and including other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete machanically, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) . Except GST & Seneoirage charges. Columns-3.66m unsupported height Ground floor
5
16656
83282.05
Kattedan Building;LINTELS Ground floor
0.8
16475
13180.62
Kattedan Building;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER/MIXER AT SITE with 12mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal of 13.20/12.50mm , 10mm and 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarry coarse aggregate, admixture, water etc., to site and , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as mixing, lifting of concrete machanically, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges for mixing, laying, curing etc., and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) ( as per mix design results) (RCC chajjas).Except GST & Seneoirage charges Ground floor sunshades
3
1357
4073.28
Kattedan Building;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER/MIXER AT SITE with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarry, coarse aggregate, water etc., to site and other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Except GST & Seneoirage charges. GROUND FLOOR BEAMS
4
15106
60424.04
Kattedan Building;150 mm thick slab
60
2005
120315
Kattedan Building;Providing TMT bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126). Except GST. All floors
5.44
83913
456490.91
Kattedan Building;Masonry work in CM(1:6) prop with Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 230 mmincluding cost and conveyance of all materials, labour charges, scaffolding lift charges, and curing, overheads & contractors profit etc., complete with a compressive strength not less than 50 kg/sq.cm for super structure wall (APSS No. 501 & 504). Except GST & Seneiorage charges. Ground floor
29
10725
311028.77
Kattedan Building;Reinforced Masonry for partition walls in CM (1:6) prop. (Cement : Sand) using Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of conveyance, loading & unloading) 600 x 200 x 100 mm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing,overheads & contractors profit etc. complete but excluding cost of steel and its fabrication charges complete for super structure wall (APSS No. 501 & 509).Except GST & Seneiorage charges. Ground floor
5.67
10097
57254.3
Kattedan Building;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } from approved quarry, coarse aggregate, water etc. to site, other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work for Bed Blocks, Hold fasts etc.(APSS No. 402)Bed Blocks, Hold fasts, levelling course, concrete flooring etc. Except GST & Seneiorage charges.Bed Blocks, Hold fasts, levelling course, concrete flooring etc Ground floor
1
6666
6666.66
Kattedan Building;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lifting of concrete machanically, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904). Except GST & Seneiorage charges. INTERNAL WALLS PLASTERING Ground floor
202.91
662
134391.35
Kattedan Building;EXTERNAL WALLS PLASTERING Ground floor
104
662
68881.28
Kattedan Building;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs As per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707). Except GST & Seneiorage charges. Ground floor
44
1422
62568
Kattedan Building;Providing skirting to internal walls to 10 cm height with vitrified tiles 8mm thick , regular finish and normal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete etc., complete for finished item of work.(APSS No.701 &707). Except GST & Seneiorage charges. Ground floor
5.5
1413
7772.66
Kattedan Building;Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 600 x 600 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles, overheads & contractors profit etc., complete for finished item of work. Except GST . Ground floor
8
1323
10588.4
Kattedan Building;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water ,overheads & contractors profit etc. complete for finished item of work. Except GST. Ground floor
30
1166
34991.4
Kattedan Building;Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 35 mm thick double shutter with solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping) with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter, laminated sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Stainless Steel fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 2 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top,4 Nos 200mm long SS handles, 1 Nos of 300mm long SS aldrop including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) including overheads & contractors profit.Except GST.
10
7282
72825.8
Kattedan Building;Providing and fixing factory-made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold Fast. Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge (SS butt hinges and SS screws shall be paid separately) including overheads & contractors profit complete.
3.7
6695
24773.54
Kattedan Building;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. The cost is including overheads & Contractor?s profit complete.
6
8088
48529.5
Kattedan Building;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. including overheads & contractors profit . Except GST.
1
7279
7279.31
Kattedan Building;Providing and fixing in true horizontal level 15 mm - Mineral Fiber Ceiling tile of 600 x600 of board / Tegular Edge tiles with a Humidity Resistance of 95% RH, Average NRC 0.50,Light Reflectance >85%, Thermal Conductivity ? = 0.052 to 0.057 w/mk, Fire Performance Class 1) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making, complete for finished item of work in all floor in all floors.including overheads & contractors profit.Except GST.
44
1579
69485.24
Kattedan Building;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work.including overheads & contractors profit. Except GST.
5
1371
6855.45
Kattedan Building;Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, complete for finished item of work in all floors for internal walls. including overheads & contractors profit. Except GST. INTERNAL WALLS PAINTING
203
285
58047.85
Kattedan Building;Supply & application of one coat of cement concrete primer & two coats of acrylic based Plastic emulsion paint approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels as per SS 911 for internal walls. Except GST. INTERNAL WALLS PAINTING
233
243
56826.37
Kattedan Building;Supply & application of one coat of cement concrete primer & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. For External walls. Except GST. EXTERNAL WALLS PAINTING
102
330
33679.38
Kattedan Building;Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with maximum flushing of 4 litres for full flush and 2 litres for single flush, with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. Including supply and fixing of toilet paper holder Complete for finished item of work in all respects: White Colour as directed by engineer in charge, including overheads & contractors profit .Except GST.
2
14715
29430.82
Kattedan Building;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part- 4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock. Brass bottle trap 250mm long with wall connecting pipe including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work as directed by engineer-in -charge. Except GST.
2
5288
10577.56
Kattedan Building;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm fixing on studs with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors as directed by engineer-in -charge.Except GST.
2
868
1736.04
Kattedan Building;Supplying and fixing of stainless steel body Double coat hook with 10 years warranty conveyance of all materials, labour charges , overheads & contractors profit for finished item of work as directed by engineer-in -charge.Except GST.
2
943
1886
Kattedan Building;Supplying and fixing CP finish brass soap dish heavy type of approved make ISI quality with SS screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors as directed by engineer-in -charge. Except GST.
2
715
1431.54
Kattedan Building;Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.Except GST.
1
850
850.98
Kattedan Building;Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings (Prince/Sudhakar/Kisan/Supreme or any other ISI Brand) as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work as per the directed by engineer-in -charge. Except GST.
4
512
2049.6
Kattedan Building;Supplying and fixing of Double socket PVC/SWR pipes Prince/Sudhakar/ Supreme /Astral/Finolex) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)Except GST. 75mm dia for waste water
31
257
7977.54
Kattedan Building;110mm dia for solid waste
17
380
6476.83
Kattedan Building;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work as directed by engineer-in -charge.Except GST. 110mm dia for solid waste
2
26
52.26
Kattedan Building;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.Except GST and Seneoirage charges.
1
9959
9959.49
Kattedan Building;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work. as per Standard specificationincluding overheads & contractors profit etc..Except GST.
1
5237
5237.65
Kattedan Building;Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.Except GST.
500
11
5680
Kattedan Building;Supplying, fixing, testing and commissioing of premium make CPVC pipes of SDR 11 for Hot and cold water supply, capable to withstand pressure of 7 kg/sq.cm and temperature of 80 degree C laid on ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils upto 1.0m deep, refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.Except GST. 15.90mm OD pipe
7
196
1375.85
Kattedan Building;22.20mm OD pipe
10
237
2374.6
Kattedan Building;28.60mm OD pipe
20
284
5680.8
Kattedan Building;34.90mm OD pipe
10
386
3862.9
Kattedan Building;Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work.Except GST. 25mm Nominal bore
1
1538
1538.35
Kattedan Building;32mm Nominal bore
1
2337
2337.06
Kattedan Building;40mm Nominal bore
1
3151
3151.68
Kattedan Building;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with maximum flow rate of 4 lpm with either internal or external threaded connection conforming to IS 8931 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors as directed by engineer-in -charge.Except GST.
2
751
1502
Kattedan Building;Supplying and fixing of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty with maximum flow rate of 4 lpm as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors as directed by engineer-in -charge.Except GST.
2
4008
8016.68
Kattedan Building;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 4.0kg/sq.cm pressure of ISI marked including cost of necessary PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328). Except GST.
20
364
7290.2
Kattedan Building;Supply and fixing of following size medium/heavy grade, FRLS with IS:9537 part 3 regid PVC pipe with junction boxes, bends etc, including labour charges fox fixing the pipe with all accessories etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Sudhakar / Finolex / Modi /Polycab a) 25mm dia heavy grade PVC pipe
110
106
11660
Kattedan Building;Point Wiring with three runs of 1.5 Sqm FRLS PVC insulated flexbile copper conductor cable as Phase ,neutral and earthing in the existing PVC conduct pipe with 6A modular type switch with PVC module front plate and including all labour charges etc., complete for light point, fan point, call bell point and exhaust fan points etc complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work Makes : Finolex / RR kabel / Havells /Polycab Makes of Switches : Makes : Legrand Myrius / GM Four Five / Goldmedal Curve / Anchor Roma violaz 1 LP Controlled by 1 Switch
4
982
3928
Kattedan Building;2 LP Controlled by 1 Switch
4
1146
4584
Kattedan Building;3 LP Controlled by 1 Switch
2
1311
2622
Kattedan Building;4 LP Controlled by 1 Switch
1
1475
1475
Kattedan Building;Supply and laying of 3 runs of 36/0.3mm (2.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete for Switch board mains and independent Raw/UPS Power Sockets Wiring)the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
100
181
18100
Kattedan Building;Supply and laying of 3 runs of 56/0.3mm (4 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete for Switch board mains and independent Raw/UPS Power Sockets Wiring)the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
100
251
25100
Kattedan Building;Supply and laying of 3 runs of (10 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete for Switch board mains and independent Raw/UPS Power Sockets Wiring)the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
20
543
10860
Kattedan Building;Supply, erection, testing and commissioning of 8 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 63A FP MCB as incommer and 24 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work Makes : Legrand / Schneider / Siemens / L&T / Hager / Crabtree Xpro / ABB / C&S
1
23428
23428
Kattedan Building;Supply, Installation, Testing & Commissioning of 1 nos 16/20A 3/5 pin modular socket and 1 nos 16/20A modular switch with front plate as directed by the dept.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge . Make: Legrand Myrius/ gold medal
3
709
2127
Kattedan Building;Supply and Installation,Testing & Commissioning of 4No 3/5 pin 6/16A modular socket with 4 No 16A modular switch , 12 modular front plate as directed by the Dept. the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.Makes : Legrand Myrius / GM Four Five / Goldmedal Curve / Anchor Roma viola
9
2942
26478
Kattedan Building;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 40mm dia 'B' class G.I pipe of 0.3mtr.long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C.Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II). The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
6635
6635
Kattedan Building;Supply and transportation of 43 / 45 W +/-10% (>=4500 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / Capart / Fortune Arrt / Goldwyn / Panasonic / Arraystorm / GM / Goldmedal / Silicon / Orient / HPL / Valmont / Transrail LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
4
3318
13272
Kattedan Building;Supply, installation. testing and Transportation of of INVERTER Model Cool type split AC unit 2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
44037
88074
Kattedan Building;Supply and Transportation of 30-36 W +/-10% (>=3600 Lumens) Back lit, 2' x2' grid false ceiling / zip board (595 mm x 595 mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE : Phillips /OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / HPL / Eveready / Surya / Keselec / Arraystorm / GM / Goldmedal / Goldwyn / Fortune Arrt / Lighting Technologies LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
8
3289
26312
Kattedan Building;Supply and transportation of 24 W +/-10% (>= 2400 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells /
14
1384
19376
Kattedan Building;Supply Fixing of wall suitable for errection Supply of 12" (300mm) Light duty exhaust fan with metallic blades etc complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Crompton or equivalent
2
2219
4438
Kattedan Building;Supply, Transportation and fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Crompton or equivalent
5
4209
21045
Kattedan Building;Supply and laying of Cat 6 LAN cable in the existing PVC/MS conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc including all taxes except GST , complete for finished item of work. (Makes:D Link / AMP / Molex/Legrand)
100
39
3900
Kattedan Building;Supply and Fixing of approved make of plug - in type LAN RJ-45 Information outlet with G.I outlet box and cover plate complete as required in 3 module plate including cost and conveyance of all materials and labour charges commissioning of CAT 6 including testing and giving report to each point etc complete The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc including all taxes except GST , complete for finished item of work. (Makes:D Link / Legrand AMP / Krone)
5
709
3545
Kattedan Building;Supply & fixing of 7 feet length moulded patch cord including labour charges for fixing and giving connections etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc including all taxes except GST , complete for finished item of work. Make-D AMP/ Molex/ Legrand/ Krone
5
227
1135
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements