Telangana State Industrial Infrastructure Corporation Limited Tender

Water supply Kallem;Painting two or more coats with synthetic enamel paint of first quality and approved make to give uniform shade to New wood work over one coat of primery coat (Total 3 or more coats) including cost and conveyance of all materials like synthetic enamel paint, sand paper, brushes etc., to site and all other taxes except GST, including all labour chages for preparation of the surface, painting neatly etc., complete as directed by Engineer-in-Charge for finished itme of work.

Water supply Kallem;Gronolithic Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water including seigniorage charges and all other taxes except GST etc., complete as directed by Engineer-in-Charge for finished item of work.

Water supply Kallem;Providing impervious / weather proof coarse over RCC roof slabs with CM (1:3) with an average thickness of 20mm thick, premixed with water proofing compound like ACCO proof or any other ISI make at one KG per bag of cement as prescribed by the manufacturer and laid over the roof slab to required slopes as directed by the Engineer-in-charge when slab is in green including cost and conveyance of all materials to site, seigniorage charges, all other taxes except GST, all labour charges for all operations, maintaining necessary slopes, finishing smooth and lininig, curing etc., complete as directed by Engineer-in-Charge for finished item of work.

Water supply Kallem;Plastering 20mm thick to INTERNAL SURFACES of brick masonry walls/ concrete surfaces in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational, incidental charges, seigniorage charges, all other taxes except GST, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary etc., complete as directed by Engineer-in-Charge for finished item of work.

Water supply Kallem;Plastering 12mm thick for EXTERNAL WALLS of brick masonry walls/ concrete surfaces in two coats with a base coat of 8 mm thick in CM (1:6) and 4 mm thick top coat in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site,seigniorage charges, and all other taxes except GST, all labour charges, all operational and incidental charges, mixing mortar, finishing, scaffolding, curing, providing architectural groves at junction of Concrete and Masonry, etc., complete as directed by Engineer-in-Charge for finished item of work.

Water supply Kallem;Providing Ornamental Plastering to ceiling 12mm thick in two coats with base coat of 9mm thick in CM (1:4) and top coat of 3mm thick in CM (1:4) prop. using fine sand including neat finishing, including cost and conveyance of all materials like cement, sand, water, etc., to site, seigniorage charges on materials, all other taxes except GST, and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting of grooves wherever necessary etc., complete as directed by Ingineer-in-Charge for finished item of work

Water supply Kallem;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre -painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm and (ii) Ventilators: Top Hung 4 '-0 x 2'-0 (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46x46 mm Mullion section size of 46 x 70 mm and (iii) Ventilators: Top Hung 4 '-0 x 3'-0 (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm, including cost and conveyance of all material to site, providing 10mm MS square guard bars at 6" c/c, all other taxes except GST, labour charges, all incidental and operational charges, etc., complete as directed by Engineer-in-Charge for finished item of work. Top Hung Ventilator of size: 2 '-0" x 2'-0" (609.6 mm x 609.6 mm) outer frame section size of 46 mm x 52 mm, shutter section size of 46 mm x 46 mm.

Water supply Kallem;For Windows: Double shutter of size 3?-0? x 4?-0? (914.4 mm x 1219.2 mm) outer frame section of 46x52mm, shutter frame section size of 46x46mm, Mullion section size of 46x70mm.

Water supply Kallem;Supply and fixing of Best Sesoned teak wood door of size 1.00Mx2.10M with single leaf flush type shutter, door frame size 100x65mm and shutter with 35mm thick flush door shutter of solid bond wood block board with commercial ply on both faces (kutty or equivalent) confirming to IS.2201 including cost and conveyance of all materials including aluminium fixures of ISI make, all other taxes except GST, all labour charges for all operations etc complete for finished item of work, as directed by Engineer-in-Charge with the following fixures (1) 40 x 40 x 5 mm Iron "Z" holdfasts- 6Nos (2) 125mm Brass Butt hinges-3Nos (3) 125mm Alluminium Anodized Handles -1 No (4) 300mm long Alluminium Aldrop - 1No (5)250mm long & 10mm dia Alluminum Tower Bolts - 2No (6) MS-Powder Coated Door stopper-1No. Door "D" of Size: 1.00 X 2.10 Mts.

Water supply Kallem;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars (Fe 415 grade as per IS 1786-1979) upto 36mm dia for RCC and RCM works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, seigniorage charges, all other taxes except GST, all labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work, as directed by Engineer-in-Charge (APSS No.126).

Water supply Kallem;Brick Masonry with CM (1:6) prop. (Cement: Sand) using second class Modular size 23 x 11 x 7 cms from approved source having crushing strength not less than 40 kg/sqcm and water absorbtion not exceeding 20% by weight including cost and conveyance of all materials like cement, sand, bricks, water, etc. to site, seigniorage charges, all other taxes except GST, and all labour charges, like mixing cement mortar, wall construction, dewatering, scaffolding charges, etc., complete as per drawing and specification and as directed by the Engineer -in-charge for finshed item of work.

Water supply Kallem;Plain Cement Concrete (1:3:6) Prop. nominal mix using 6 to 20 mm nominal size (SS5) well graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and seigniorage charges, all other taxes except GST and all labour charges, machine mixing, laying concrete, curing, finishing top surface to required levels neatly etc., complete as directed by Engineer-in-Charge for finished item of work for bed blocks

Water supply Kallem;R C C Chajjas / Sunshades 600 mm wide having 75 mm thick at fixed end and 50 mm thick at free end with an average thickness of 62.5 mm including providing 12 mm thick plastering to all exposed surfaces in CM ( 1:4 ) and providing 12 X 25 mm drip mould at bottom and galtha at top including cost and conveyance of all materials like cement, coarse aggregate, sand, etc., to site, seigniorage charges of materials, all other taxes except GST, including centering, shuttering, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, all other incidental and operational charges, labour charges etc., complete but excluding cost of steel and its fabrication charges etc., complete as directed by Engineer-in-Charge for finished items of work.

Water supply Kallem;Roof Slab of 100 mm thick

Water supply Kallem;Lintels

Water supply Kallem;Beams

Water supply Kallem;Columns

Water supply Kallem;Pedastals upto Basement

Water supply Kallem;Providing and laying of Vibrated Reinforced Cement Concrete corresponding to M-30 grade Design Mix Concrete corresponding to IS 456 using weigh batcher with 20mm size well graded machine crushed hard granite chips (Coarse aggregate) from approved quarry with a minimum cement content of 350 kg/CuM including cost and conveyance of all materials like cement, Coarse aggregate, Fine aggregate, water etc., to site, seigniorage charges of all materials, all other taxes except GST, including centering & shuttering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates weigh batcher etc machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, pumping to work spot, lifting of material with mechanical equipment like winch, etc., all other incidental and operational charges, all labour charges, etc., but excluding cost of steel and its fabrication charges etc., complete as directed by Engineer-in-Charge for the following finished items of work. Column Footing

Water supply Kallem;Re filling foundation/ basement /pipe line trenches with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, and all other taxes except GST, all labour charges, hire charges of T&P etc., complete for finished item of work, as directed by Engineer-in-charge (APSS No. 309 & 310)

Water supply Kallem;Flush pointing to RR Masonry basment with CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, including all other taxes except GST, all labour charges, like raking mortar joints to required depth, washing the wall, mixing cement mortar, pointing the joints of masonry, curing etc., complete as directed by Engineer-in-charge for finished item for work.

Water supply Kallem;RR masonry in CM(1:6) prop. using hard granite stone from approved quarry including cost and conveyance of all materials to site, seigniorage charges, all other taxes except GST, all labour charges for dressing stones to required size and shape, cost of bond stone mixing of cement mortor, stone wall construction, curing, etc. complete as directed by Engineer-in-charge for finished item of work.

Water supply Kallem;Plain Cement Concrete (1:4:8) prop.using 40mm nominal size well graded hard broken granite metal from approved quarry including cost and conveyance of all material, seigniorage charges, all other taxes except GST, and all labour charges for machine mixing of concrete, laying concrete, compacting by vibration including curing, finishing top surface to required levels neatly etc., complete as derected by Engineer-in-charge for finished item of work in foundations. BLD-CSTN-3-5

Water supply Kallem;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).

Water supply Kallem;Construction of GLSR including verticals, lightening arrester, nameboard, plastering, painting and etc., including all labour charges, three coats of food grade epoxy paint to inner surface of the reservoir inuding roof dome, including 2 coats of weather proof emulsion painting for external surfaces over one coat of primer of approved make, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, wind pressures upto 250 kg/ sq m. For decrease in wind pressure the rate has to be decreased by 2.5% per every 50 kg/sqm. If the GLSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs. For Tribal/ Agency area, the above rates shall be increased by 5%. If the GLSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earth quake the above rates are to be increased by 15%. Fixtures include: a) RCC or Aluminium ladder inside 0.60 m wide. staircase on the outside shall be provided upto 300KL GLSR. b) Lightning arrestor, including conductor and earthing etc with relevant IS codes. c) RCC ventilators with copper or stainless Steel fly proof Public Health (Part-IV) SoR 2022-23 Page 386 of 467 Sl. No. Description Unit Scheduled Rate mesh. d)RCC Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) -2 Nos. Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. , The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided e) D.I swan neck ventilators shall be provided in top dome and slab-4Nos minimum, The above rates are exclusive of all inlet, outlet connections, valves and bolts & nuts but including labour charges for hoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of GLSRs shall be D.I valves.

Water supply Kallem;Construction of ELSR including verticals, lightening arrester, nameboard, plastering, painting and etc., including all labour charges, three coats of food grade epoxy paint to inner surface of the reservoir inuding roof dome, including 2 coats of weather proof emulsion painting for external surfaces over one coat of primer of approved make, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, wind pressures upto 250 kg/ sq m. For decrease in wind pressure the rate has to be decreased by 2.5% per every 50 kg/sqm. If the ELSR/ OHSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs. For Tribal/ Agency area, the above rates shall be increased by 5%. If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earth quake the above rates are to be increased by 15%. Fixtures include: a) RCC or Aluminium ladder inside 0.60 m wide. staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20m. S.S railing to stair case upto 1.2m height. c) Lightning arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless Steel fly proof Public Health (Part-IV) SoR 2022-23 Page 386 of 467 Sl. No. Description Unit Scheduled Rate mesh. e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) -2 Nos. Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. , The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRS only. shall be at 1.0mt interval. h) The increase in staging shal be at 1.0m interval. i )The railing provided to the gallery and stair case shall be with stainless Steel of grade 304 for a height of 1.20m, The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with PVC door of standard make up to 1st brace level from ground level to prevent unauthorized entry. k) D.I swan neck ventilators shall be provided in top dome and slab-4Nos minimum, The above rates are exclusive of all inlet, outlet connections, valves and bolts & nuts but including labour charges for hoisting, jointing with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of ELSRs shall be D.I valves.

Water supply Kallem;Re filling foundation/ basement /pipe line trenches with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, and all other taxes except GST, all labour charges, hire charges of T&P etc., complete for finished item of work, as directed by Engineer-in-charge (APSS No. 309 & 310)

Water supply Kallem;Supply, delivery and fixing of 80mm dia. Fire Hydrant on the main including cost, transportation and local conveyance to work site, all incidental charges, labour charges, all other taxes except GST ect., complete as directed by Enginner-in charge for finished item of work.

Water supply Kallem;Construction of brick masonry chamber for scour valve as per type design SAN TD No.78/1959 including earth work excavation in all types of soils; providing concrete broken stone in CM(1:4) for foundation; brick masonry in CM(1:6) for chamber with plastering in CM(1:3), 12mm thick having RCC(1:2:4) for cover slab with 508mm dia man hole frame and cover including cost and conveyance of all materials to site, seignorage charges, all other taxes except GST, all labour charges, curing etc., complete as directed by Engineer-in-charge for finished item of work. 80 mm dia Scour Valve

Water supply Kallem;50 mm dia.

Water supply Kallem;Construction of brick masonry chamber for Air Valves as per type design SANTD No.9/1043 including earth work excavation in all types of soils; providing concrete broken stone in CM(1:4) for foundation; brick masonry in CM(1:6) for chamber with plastering in CM(1:3), 12mm thick having RCC(1:2:4) for cover slab with 500mm dia manhole frame and cover including cost and conveyance of all materials to work site, seigniorage charges, all other taxes except GST, all labour charges, curing etc., complete as directed by Engineer-in-charge for finished item of work. 40mm dia.

Water supply Kallem;63 mm dia

Water supply Kallem;90 mm dia

Water supply Kallem;160 mm dia

Water supply Kallem;Construction of Brick masonry chamber for sluice valves as per type design SANTD 4/1941 including earth work excavation in all types of soils, providing concrete broken stone in CM(1:4) for foundation; brick masonry in CM(1:6) for chamber with plastering in CM(1:3) 12mm thick having RCC(1:2:4) for cover slab with 500 mm dia manhole frame and cover including cost and conveyance of all materials, seignorage charges, all other taxes except GST, all labour charges, curing etc., complete for finished item of work, as directed by Engineer-in-charge. 200 mm dia

Water supply Kallem;Manufacture, Supply and Delivery of Cast Carbon Steel Sluice Valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998. (The valve shall be used for High pressure schemes & pumping stations), including lowering and laying the valves in position and including all other taxes except GST, including transportation of all materials to site etc., complete as directed by engineer-in-charge for finished item of work. (ISI Marked.) 80 mm dia Scour Valve

Water supply Kallem;50 mm dia.

Water supply Kallem;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the department, including transportation of all materials to site, labour charges for fixing, all other taxes except GST etc., complete as directed by engineer-in-charge for finished item of work. 40mm dia.

Water supply Kallem;200 mm dia

Water supply Kallem;160 mm dia

Water supply Kallem;125 mm dia

Water supply Kallem;90 mm dia

Water supply Kallem;Jointing DI/CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead to site, filling with water and all other taxes except GST etc., with lead up to 500 meters and testing to required pressure complete as directed by Engineer-in-charge. (Reference to specifications. BIS No.3114/1994.) for finished item of work. 63 mm dia.

Water supply Kallem;65 mm dia

Water supply Kallem;80 mm dia

Water supply Kallem;160 mm dia

Water supply Kallem;Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998. (The valve shall be used for High pressure schemes & pumping stations), including lowering and laying the valves in position and including all other taxes except GST, including transportation of all materials to site etc., complete as directed by engineer-in-charge for finished item of work. (ISI Marked.) 200 mm dia

Water supply Kallem;200 mm dia

Water supply Kallem;160 mm dia

Water supply Kallem;125 mm dia

Water supply Kallem;90 mm dia

Water supply Kallem;Manufacture, Supply and delivery of HDPE pipes confirming to IS 4984-1995 for distribution network including transportation of all materials to work site including labour charges for laying, jointing by Butt fusion welding as per IS 7634-PII/1975 to the alignment and gradient and testing of pipe line to the required pressure, refilling, cost of materials and specials all other taxes except GST excluding earthwork excavation etc., complete as directed by Engineer-in-charge as per standared specifications for finished item of work. 63 mm dia.

Water supply Kallem;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).

Water supply Kallem;Re filling foundation/ basement /pipe line trenches with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, and all other taxes except GST, all labour charges, hire charges of T&P etc., complete for finished item of work, as directed by Engineer-in-charge (APSS No. 309 & 310)

Water supply Kallem;Construction of brick masonry chamber for Air Valves as per type design SANTD No.9/1043 including earth work excavation in all types of soils; providing concrete broken stone in CM(1:4) for foundation; brick masonry in CM(1:6) for chamber with plastering in CM(1:3), 12mm thick having RCC(1:2:4) for cover slab with 500mm dia manhole frame and cover including cost and conveyance of all materials to work site, seigniorage charges, all other taxes except GST, all labour charges, curing etc., complete as directed by Engineer-in-charge for finished item of work. 40 mm dia Air valve

Water supply Kallem;Construction of Brick masonry chamber for sluice valves as per type design SANTD 4/1941 including earth work excavation in all types of soils, providing concrete broken stone in CM(1:4) for foundation; brick masonry in CM(1:6) for chamber with plastering in CM(1:3) 12mm thick having RCC(1:2:4) for cover slab with 500 mm dia manhole frame and cover including cost and conveyance of all materials, seignorage charges, all other taxes except GST, all labour charges, curing etc., complete for finished item of work, as directed by Engineer-in-charge. 150mm dia Sluice valve

Water supply Kallem;Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material. as per IS:1030/1998 with SS Hinge & Seat Rings, including transportation of all materials to site, labour charges for fixing, all other taxes except GST etc., complete as directed by engineer-in-charge for finished item of work. 150mm dia Non-Return valve

Water supply Kallem;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the department, including transportation of all materials to site, labour charges for fixing, all other taxes except GST etc., complete as directed by engineer-in-charge for finished item of work. 40 mm dia Air valve

Water supply Kallem;Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998. (The valve shall be used for High pressure schemes & pumping stations), including lowering and laying the valves in position and including all other taxes except GST, including transportation of all materials to site etc., complete as directed by engineer-in-charge for finished item of work. (ISI Marked.) 125 mm dia sluice valve

Water supply Kallem;Jointing DI/CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead to site, filling with water and all other taxes except GST etc., with lead up to 500 meters and testing to required pressure complete as directed by Engineer-in-charge. (Reference to specifications. BIS No.3114/1994.) for finished item of work. 150 mm

Water supply Kallem;Manufaturing,Supply, Delivery , laying and jointing of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985/8329-2000 with latest amendments and locking bars & rubber spacers , conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost includes soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials etc complete but excluding taxes 150mm DI K9 Pipe.

Water supply Kallem;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).