Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 18,45,000Document Cost
Refer DocumentsTender Fee
₹ 11,800
Summary
Providing Interiors And Landscape To The Core And Shell Of The Existing T-works Building In Survey No.83/1, Raidurgaam Panmaktha(v),
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
164269Bid Award Id
ViewTender No
39/CE/TSIIC/2019-20, Dated:04.02.2020Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Depth up to 3.00 Mts
2800
-
79.7
Depth from 3.00 Mts to 6.00 Mts
540
-
71.7
Earth work excavation for Hard Rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m, including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (APSS 308)(Excavated rock to be stacked and 40% volume to be deducted for voids.)
-
-
-
Depth up to 3.00 Mts
2900
-
2017.6
Depth from 3.00 Mts to 4.00 Mts
540
-
2029.3
Refilling/Back filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site, including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes but excluding GST, etc., complete for finished item of work as directed by the Engineer-In-Charge. (APSS NO. 309 & 310)
1750
-
36.6
Conveyance of excavated Rock/Soils from site with a lead 20 km and disposing it as directed by the Engineer-In-Charge including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes but excluding GST etc., complete for finished item of work.
7000
-
301
Supply and spreading of Gravel for preparation of Mounds with gravel brought from outside, preparation of troughing for maintaining required slope and gradient, for preparation of ridges and valley,breaking the earthern clods into smaller pieces,removal of rubbish, debris, dressing as per the the approved drawing, required watering as per the directions of the Engineer-in-Charge including cost and conveyance of all materials like gravel, water to work site, including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes excluding GST and Seigniorage Charges, etc., complete for finished item of work as directed by the Engineer-In-Charge.
12600
-
414
Plain Cement Concrete (1:4:8) proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc. to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work and as directed by the Engineer-in-Charge.
FOR RETAINING WALL
20
-
4077.1
Supply and placing of the M-25 Grade (with cement 380 kg per cum) Design Mix Concrete corresponding to IS 456 using Batching Plant at 50 cum per hour, Transit mixer 2cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50 % of fine aggregate (sand) and 50% of Crushed stone sand /Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc., to site, including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing, including all taxes excluding GST and Seigniorage charges, etc., complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
FOOTING
50
-
7177.6
200MM THICK WALL RETAINING WALL
230
-
5569.8
WAIST SLAB 100MM Thick
350
-
1126.4
THREADS AND RISER
30
-
5602.6
TOE BEAM
30
-
6369.3
Providing High Yield Strength Deformed(HYSD) Steel bars as per IS 1786-2008 of different diametres for RCC Works, including Labour charges for Straightening, Cutting, Bending to required sizes and shapes, Placing in position with cover blocks of approved materials and size and tying and lap-Splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials like reinforcement steel bars from approved source, Binding wire, Cover Blocks to site of work, including all wastages such as Overlaps, Couplings, Chairs, Spacer bars, including all incidental and operational charges, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials, all taxes but excluding GST etc., complete for finished item of work in all floors (APSS NO.126) FOR RETAINING WALL
14.8
-
58273.1
Flooring with Granite 16 to 18 mm thick leather finish/bush hammered/flame finish up to 8'-00 (2.43 M) other than black/ premium colours set over a base coat of CM (1:8) prop. 20mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over the existing hard strata laid already,including Half Round Nosing to the Thread, flamming, including cost and conveyance of all materials like cement, sand, water, granite slabs, white cement etc., to site, including cost of all incidental and operational, labour charges, all taxes Excluding seigniorage charges and GST on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge, curing etc., complete for finished item of work.(APSS No. 707 & 701)
FOR RETAINING WALL
500
-
6052.1
RANDOM RUBBLE STONE Masonry in CM(1:6) prop. using hard granite stone from approved quarry including cost and conveyance of all materials like Cement, Sand, water, Crushed Stone, R.R Stone, Bond Stone to work site, using 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including all incidental and operational charges, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, etc., including all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work as directed by the Engineer-in-Charge (APSS No. 615) as per MoRT&H 5th Revision Sl.No.13.4 of MoRT&H Specification No.1400 and 2200
26
-
4504.8
Providing and laying Plain Cement Concrete (1:2.5:5) corresponding to M-15 grade using 20 mm nominal size well graded machine crushed hard granite chips (coarse aggregate) with minimum cement content of 275 kgs from approved quarry including cost and conveyance of all materials like cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate), all labour charges, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, including all incidental and operational charges, all taxes excluding GST and Seigniorage Charges etc., complete for finished item of work for coping as per MORT&H (5th Revision) specification 2100.
3
-
5018.4
Flush pointing to Random Rubble Stone masonry in CM (1:4) including cost and conveyance of all materials like Cement, Fine Aggregate, water, sponge etc., to work site, including all incidental and operational charges, labour charges for all operations, curing, scaffolding, all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work.
150
-
110.9
Supplying and fixing of SS Sheet/Plate 304 grade as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . For Railing
2500
-
705
ROADS AND DRAINAGE INCLUDING ROAD CROSSING PIPE AND KERB
-
-
-
DRIVE WAYS
-
-
-
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (ApSS 308).
Along the Drive Ways
3100
-
79.7
Construction of embankment with available useful excavated earth deposited at site by road way including watering, grading and compacting each layer to required proctors density with OMC compaction with vibratory roller of 8 Tonnes capacity, maintaining the required camber in the formation including cost and conveyance of all materials to work site, including all incidental and operational charges, all labour charges, hire and operational charges of power roller, mortar grader, water tanker, all water leads, all taxes but excluding GST etc., complete as per requirement of table 300.1 and 300.2 as per Technical Specification clause No.305 MORT&H (5th Revision of Sl.No.3.17). (Payment will be based on levels for finished item of work).
Along the Drive Ways
900
-
156.7
Construction of embankment with good gravel brought from outside and spreading in layers of not more than 200mm thick each or as directed by the Engineer-in-Charge during execution, watering, dozing, grading and compacting each layer to required proctors density with Optimum Moisture Content compaction with vibratory roller of 8 Tonnes capacity, maintaining the required camber in the formation including cost and conveyance of good gravel to work site, including all incidental and operational charges, all labour charges, hire and operational charges of dozer, power roller, mortar grader, water tanker, all water leads, ,all taxes but excluding GST and seigniorage charges etc complete as per requirement of table 300.1 and 300.2 as per Technical Specification clause No.305 MORT&H (5th Revision of Sl.No.3.18). (payment will be based on levels for finished item of work). Along the Drive Ways
2100
-
692.4
Construction of Granular sub base of 150mm thick by providing HBG/ HBT material confirming to Grading-III of MORT&H Table- 401,35% of 9.50mm to 4.75mm HBG metal, 12.5% of 4.75mm to 2.36mm HBG metal and 52.5% of 2.36mm and below HBG metal by providing close grade material, spreading in uniform layers with motor grader on prepared surface, or by approved means mixing by mix in place method with rotavator/ approved means at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density, including cost and conveyance of all materials to work site, including all incidental and operational charges, labour charges, all taxes but excluding GST and Seigniorage charges, etc. complete for finished item of work as per MORT&H (5th Revision) Technical specification clause no:401 as directed by the Engineer-in-charge. Along the Drive Ways
1125
-
1625.7
Construction of dry lean cement concrete Sub- base using M15 Grade or Equivalent over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 162 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing, including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc. to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by the Engineer-in-Chargeas per 5th Revision MoRTH Technical Specification No.601,Sl.No.6.1 of Chapter -6 - UNDER PAVER BLOCK.
1000
-
3527
Supply and Transportation of 160mm OD(Inner Dia 130mm) double walled 3corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Tees etc., complete including laying, jointing, fixing in position, including all incidental and operational charges, labour charges, all taxes but excluding GST etc complete for finished item of work. Makes: DURA LINE(Dura Guard) / Bajaj /Gamson/Ultra Plus - Under Footpath
2200
-
533.5
Supply and fixing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Medium traffic areas conforming to IS15658:2006 in all shapes, sizes, colours, patterns and designs as per the approval of the engineer-in-charge laying on the 50mm thick compacted sand over already prepared hard strata on the ground including cost and conveyance of all materials like Paver block, sand, water to site, including all incidental and operatonal charges, Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc, hire charges, excluding cost of seigniorage charges, all taxes but excluding GST etc., complete for finished item of work as directed by the Engineer-In-Charge- Paver Block under the Paver Blocks
6650
-
745.1
STORM WATER DRAIN
-
-
-
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (ApSS 308).
-
-
-
Depth up to 3.00 Mts
-
-
-
Drain along the Drive ways
900
-
79.7
Earth work excavation for Hard Rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m, including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (APSS 308)(Excavated rock to be stacked and 40% volume to be deducted for voids.)
-
-
-
Depth up to 3.00 Mts
-
-
-
Drain along the Drive ways
850
-
2017.6
Refilling/Back filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site, including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes but excluding GST, etc., complete for finished item of work as directed by the Engineer-In-Charge. (APSS NO. 309 & 310) Drain along the Drive ways
200
-
36.6
Conveyance of excavated Rock/Soils from site with a lead 20 km and disposing it as directed by the Engineer-In-Charge including loading charges, unloading charges, including all Incidental and operational charges, labour charges, all taxes but excluding GST etc., complete for finished item of work. Drain along the Drive ways
2100
-
301
Plain Cement Concrete (1:4:8) proportion nominal mix cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc. to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work AS PER 12.4 OF MORTH SPECIFCATION NO.2100 and as directed by the Engineer-in-Charge FOR DRAIN. (Drain along the Drive ways)
120
-
4077.1
RANDOM RUBBLE STONE Masonry in CM(1:6) prop. using hard granite stone from approved quarry including cost and conveyance of all materials like Cement, Sand, water, Crushed Stone, R.R Stone, Bond Stone to work site, using 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, including all incidental and operational charges, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, etc., including all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work as directed by the Engineer-in-Charge (APSS No. 615) as per MoRT&H 5th Revision Sl.No.13.4 of MoRT&H Specification No.1400 and 2200. Drain along the Drive ways
1300
-
4504.8
Providing and laying Plain Cement Concrete (1:2.5:5) corresponding to M-15 grade using 20 mm nominal size well graded machine crushed hard granite chips (coarse aggregate) with minimum cement content of 275 kgs from approved quarry including cost and conveyance of all materials like cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate), all labour charges, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, including all incidental and operational charges, all taxes excluding GST and Seigniorage Charges etc., complete for finished item of work for coping as per MORT&H (5th Revision) specification 2100. Drain along the Drive ways
60
-
5018.4
Flush pointing to Random Rubble Stone masonry in CM (1:4) including cost and conveyance of all materials like Cement, Fine Aggregate, water, sponge etc., to work site, including all incidental and operational charges, labour charges for all operations, curing, scaffolding, all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work as per Sl.No.13.2 of MoRT&H Specification No.1300 and 2200 (5th Revision). Drain along the Drive ways
700
-
110.9
Supply, Fabrication and erection /fixing of using Structural steel work as per the appoved drawing using Mild steel sections and Structural Steel i.e Angles, Channels, I-Section of all sections fixing in the positon at required location including cost and conveyance of all materials like Structural Steel, including one coat of Red Oxide Paint including all incidental and operational charges for fabrication of structure like cutting, tying of rod fixing them in position, including hire charges for welding machine, electrodes, welding the bar to channel if required, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-charge. Drain along the Drive ways MS Grating
18800
-
92.6
Painting with two or more coats of best quality of synthetic enamel paint of approved shades on new IRON WORK including cost and conveyance of all materials like Synthetic enamel paint,thinner, brushes, ladder etc to site, including sales and other taxes on all materials, all taxes but excluding GST etc complete for finished item of work as per drawing and Technical Specification Clause No.8.8 of MoRT&H Specification No.803. Drain along the Drive ways for grating
1000
-
101.2
ROAD CROSSING PIPES NP3 -450MM DIA HUME PIPE
-
-
-
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (ApSS 308) FOR RCC NP3 HUME PIPE OF 450MM DIA. Depth up to 3.00 Mts
1500
-
79.7
Plain Cement Concrete (1:4:8) proportion nominal mix cement:50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by the Engineer-in-Charge UNDER RCC NP3 HUME PIPE OF 450MM DIA.
250
-
4077.1
Providing and laying of Reinforced Cement Concrete Hume Pipe of 450MM dia NP3 ClassPlain Ended Tongue and Groove Model Pipe for culverts including cost and Conveyance of Pipe, all taxes excluding GST, all labour charges for lowering, laying and jointing of Pipes in position with Cement Mortar CM (1:2) including lifting, aligning, lowering and hoisting etc., as per drawing and as per MORTH specification 2900, 2905 and 2906 (5th Revision) and as directed by the Engineer-in-charge for finished item of work. (FOR ROAD CROSSING PIPE)
900
-
1960
KERB
-
-
-
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Incidental and operational charges, labour charges such as shoring, sheeting, planking, strutting, excluding dewatering charges, all taxes but excluding GST etc., complete for finished item of work as directed by Engineer-In-Charge as per SS 20B (APSS 308) Along the Driveways
60
-
79.7
Plain Cement Concrete (1:4:8) proportion nominal mix cement:50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by the Engineer-in-Charge UNDER KERB BED and Sides
20
-
4077.1
Supply and fixing of M20 Grade Pre-Cast cement concrete kerb stone of size 600MM x 110MM x 400MM including cost and conveyance of all materials like cement, sand, Water, Kerb etc, to site, loading, unloading, kerb stone transportation charges, labour charges for fixing kerb stone true to alignment, mixing charges, jointing to full depth and width with CM (1:4) proportion, curing, including all incidental and operational charges, all taxes but excluding GST and Seigniorage charges etc., complete for finished item of work. Along the Driveways
1500
-
489.7
Painting with one coat of cement primer and two or more coats of best quality of synthetic enamel paint of approved shades on new concrete surfaces including cost and conveyance of all materials like Primer, Synthetic enamel paint, thinner, brushes, ladder etc to site, including sales and other taxes on all materials, curing, all taxes but excluding GST etc complete for finished item of work as per drawing and Technical Specification Clause No. 8.8 of MoRT&H Specification No.803 Along the Driveways
800
-
190.82
Supplying,Lowering,jointing and laying of 110mm dia Single Socket PVC/SWR pipe - 4 Kg/ sq.cm including cost and conveyance of all materials like PVC Pipe, Pipe Solvent etc., to site, including all incidental and operational, labour charges like lowering, jointing, laying of PVC pipe, scaffolding charges, all taxes but excluding GST etc., complete for finished item of work as directed by the Engineer-In-Charge.
90
-
244.2
INTERIORS
-
-
-
BLOCK MASONRY
-
-
-
Brick Masonry with Fly ash brick Class 5 of size 290x150x140 mm in super structure of building walls with cement mortar (1:6) prop (Cement: sand) using 290mm x 150mm x 140mm from approved source having minimum crushing strength of not less than 5 N/ sq .mm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, all taxes excluding GST and cost of excluding seigniorage charges on all materials, etc., complete for finished item of work as directed by the Engineer-In-Charge and as per SS 504.
-
-
-
GROUND FLOOR
2
-
8922
FIRST FLOOR
2
-
9604.5
SECOND FLOOR
2
-
10286.9
Aerated (cellular) Autoclvaed concrete Block masonry for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using size 600 x 200 x 150 mm from approved source having minimum crushing strength of 3 N/sq.mm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as per SS 504.
-
-
-
GROUND FLOOR
200
-
8722.7
FIRST FLOOR
200
-
9405.3
SECOND FLOOR
100
-
10087.6
Supply and placing of the M-20 Grade (with minimum cement content of 330 kg per cum) NOMINAL MIX Concrete corresponding to IS 456 using Batching Plant at 50 cum per hour, Transit mixer 2cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 50 % of fine aggregate (sand) & 50% of 4.75mm -2.36 mm, coarse aggregate, water etc., to site, including all incidental and operational charges, labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No.403) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing, all taxes but excluding GST and Seigniorage charges,etc., complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
LINTEL
-
-
-
GROUND FLOOR
1
-
12254.7
FIRST FLOOR
1
-
12883.5
SECOND FLOOR
1
-
13510.8
Providing High Yield Strength Deformed(HYSD) Steel bars of Fe-500 as per IS 1786-2008 of different diametres for RCC Works, including Labour charges for Straightening, Cutting, Bending to required sizes and shapes, Placing in position with cover blocks of approved materials and size and tying and lap-Splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials like reinforcement steel bars from approved source, Binding wire, Cover Blocks to site of work, including all wastages such as Overlaps, Couplings, Chairs, Spacer bars, including all incidental and operational charges, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials, all taxes but excluding GST etc., complete for finished item of work in all floors(APSS NO.126)
0.3
-
58273.1
Plain Cement Concrete (M20) NOMINAL MIX Cement: 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 : Coarse aggregate) for BED BLOCKS /CONCRETE BANDS using 20mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50% fine aggregate and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970, coarse aggregate, water etc. to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by the Engineer-in-Charge (APSS No. 402)
-
-
-
FOR BED BLOCKS/ CONCRETE BAND.
-
-
-
GROUND FLOOR
5
-
5982.6
FIRST FLOOR
5
-
6150.4
SECOND FLOOR
5
-
6318.3
Providing Mild Steel(MS) bars as per IS 1786-2008) of different diametres for RCC Works, including Labour charges for Straightening, Cutting, Bending to required sizes and shapes, Placing in position with cover blocks of approved materials and size and tying and lap-Splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials like reinforcement steel bars from approved source, Binding wire, Cover Blocks to site of work, including all wastages such as Overlaps, Couplings, Chairs, Spacer bars, including all incidental and operational charges, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials, all taxes but excluding GST etc., complete for finished item of work in all floors(APSS NO.126)
0.5
-
63045
Groove Pointing to Block masonry in CM(1:3) in Super Structure including cost and conveyance of all materials like Cement, Sand, water to site, including all incidental and operational charges, labour charges for all operations, curing, scaffolding, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work.
-
-
-
GROUND FLOOR
1500
-
122.5
FIRST FLOOR
1200
-
137.4
SECOND FLOOR
750
-
152.3
Plastering to walls with 16 mm thick in two coats with base coat of 12mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials, including all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., all taxes but excluding GST and Seigniorage charges, complete for External and Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901, 903 & 904).
-
-
-
GROUND FLOOR
900
-
528.1
FIRST FLOOR
700
-
577.5
SECOND FLOOR
500
-
626.8
Plastering to walls with 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials, including all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., all taxes but excluding GST and Seigniorage charges, complete for External and Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901, 903 & 904).
-
-
-
GROUND FLOOR
600
-
514.7
FIRST FLOOR
500
-
564
SECOND FLOOR
300
-
613.3
Plain Cement Cinder Concrete (1:15) proportion nominal mix cement:12.5mm to down cinder for sunken slab area for levelling courses and over the existing cc/rcc/ sunken slab using 12.5mm to down cinder as per IS:2686-1977 including cost and conveyance of all materials like cement, 12.5mm to down cinder, water etc. to site, including all incidental and operational charges, including machine mixing all charges for mixing, laying concrete finishing top surface to the required level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
GROUND FLOOR
5
-
3132.1
FIRST FLOOR
5.5
-
3307.1
SECOND FLOOR
5.5
-
3482.1
Providing Water Proofing for Wash Area and Toilets,making the Surface Preparation/ Cleaning the existing Flooring, removing all demurrage existing upto concrete surface, Applying Bostic BOSOLASTIC/FOSROC/MYK of approved brand by the Engineer-in-Charge Brush bond a polymer based two component waterproof coating in two coats, with proper galthas, alround Side upto a height of 0.30m wherever necessarily required, including all incidental and operational charges, Transportation, labour charges, all overhead charges & contractor profit, all taxes except GST etc.,complete as directed by Engineer In Charge for finished item of work for all floors and at all levelster etc., to site, finishing, scaffolding, lift charges, curing, all taxes but excluding GST, etc. complete for finished item of work as directed by Engineer-In-Charge etc., complete for finished item of work. (SS 903 & 904).
-
-
-
BEFORE LAYING THE CINDER AND OVER THE CINDER
-
-
-
GROUND FLOOR
150
-
427.9
FIRST FLOOR
150
-
427.9
SECOND FLOOR
150
-
427.9
FLOORING
-
-
-
Supply of Non-skid red or white full body Ceramic floor tiles of scratch free-stain free and scratch free finish of size 600 x 600 mm with thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs,band as approved as directed by the Engineer-In-Charge, laying tiles, set over a base coat of CM (1:8) prop. 20mm thick using screened sand (50% River sand and 50% crushed sand - as per IS:383) over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm and jointed neately with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding GST and excluding cost of seigniorage charges on all materials, but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., and complete for finished item of work. (APSS No.701 & 707).
-
-
-
GROUND FLOOR
60
-
1123.5
FIRST FLOOR
60
-
1171.3
SECOND FLOOR
60
-
1219
Dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of approved colour and finish by the architect and make set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing, all taxes but excluding GST and Seigniorage Charges etc., complete for finished item of work as directed by Engineer-in-charge.
-
-
-
Dadoing upto 2.7M Height in all bathrooms, which is the bottom of the false ceiling, as indicated in the drawing
-
-
-
GROUND FLOOR
360
-
868.8
FIRST FLOOR
250
-
880.6
SECOND FLOOR
250
-
892.4
Providing and Fixing Ceramic tile for Wall(Dadoing) of approved colour and shade as directed by the Engineer-in -charge finish by the architect and make set over a base coat of CM (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of excluding seigniorage on materials and all labour charges for mixing of cement mortar, laying tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge the tiles to be terminated with 25x25mm SS Angle on all sides, including all incidental and operational charges, Transportation, labour charges and all taxes Excuding GST and Seigniorage charge, for complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
-
-
-
GROUND FLOOR
15
-
878.8
FIRST FLOOR
5
-
890.6
SECOND FLOOR
20
-
902.3
Providing and Making of Granite Counter top making with base frame 19 mm thick Plywood conforming to IS:303 BWR Grade using supporting system of wall bracktes and top surface of the plywood is finished with High Polished Granite 16 to 18 mm thick, the granite edge portion Full Rounding the edges and making the opening for counter basin or sink, and required adhesive material for fixing the Plywood with Granite, the granite as per the requirement, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer-In-Charge
50
-
10824.8
Providing Skirting 100 mm high using High Polished Granite 8mm thick other than black/ premium colours ,designs as directed by the Engineer-In -Charge, set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Granite, cement, sand and water etc., complete for finished item of work.The skirting should flush online with plastering including all incidental and operational charges, Transportation ,labour charges, all taxes but Excuding GST seigniorage charges etc., complete for finished item of work for all floors and all levels as directed by Engineer In charge
-
-
-
GROUND FLOOR
50
-
1950
FIRST FLOOR
60
-
2007.4
SECOND FLOOR
30
-
2064.7
Flooring with Granite 16 to 18 mm thick leather finish/bush hammered/flamed up to 8'-00 (2.43 M) other than black/ premium colours set over a base coat of CM (1:8) prop. 20mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (50% River sand and 50% crushed sand - as per IS:383), water, granite slabs, white cement etc., to site (excluding cost of C.C. bed) cost of Excluding seigniorage and Excluding GST, on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, as per the approved pattern, as directed by the Engineer-in-charge curing etc., complete for finished item of work.(APSS No.707 & 701)
-
-
-
GROUND FLOOR
80
-
5108.6
FIRST FLOOR
100
-
5196.6
SECOND FLOOR
60
-
5284.6
Providing and laying of Floor Hardener cum Concrete, densifier to rehabilitate, Strengthen, dust proof and seal the top concrete,burnishing the surface to give a dust free, Zero maintenance, Glossy Densi Floors,Grinding the entire surface wherever required, joints must be designed carefully as any cracks in substrate will transmit on recommended to follow "ACI302.1 R.89-Concrete Joint Placement", 5Step system offered final polish with 3000 grits will give good sheen, approved color and pattern as directed by the Engineer-in-Charge pigments with wearing resistance and Fire Resistance as per standards including all incidental and operational charges, Transportation, labour charges, all taxes but excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In charge.Make:Cipy,Ashford or other equivalent.
6100
-
378.8
Providing and laying in pattern 2.0mm thick Imported/ Indian Vinyl Composition Floor Tiles of approved size having an overall thickness of 2.0mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, approved color and pattern as directed by the Engineer-in-Charge pigments with wearing resistance, Fire Resistance and antic static as per standards including transitional profile of approved brand including all incidental and operational charges, Transportation, labour charges, all taxes but excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In charge. MAKE:GERFLOR(MIPOLAM AMBIANCE ULTRA) ,FORBO, TARKETT OR other Equivalent.
110
-
2130.5
Providing, preparing the surface and laying of Tile Carpet of size of approved model, machine made solution dyed nylon with synthetic backing, carpet finished Loop pile weight not less than 450 gms/ sqm, a hot water treated carpet with a guage not less than 5mm, average density around 0.3 g/cm3, including transition profile of approved brand as per approved by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all taxes but Excuding GST etc.,complete for finished item of work for all floors and all levels as directed by Engineer In charge make:Toli Carpet/Shaw/Interface/Milliken/Welspun
1400
-
1998
Providing and laying 3.05 mm Epoxy colour Floor coating: 1 coat of Pro Epishield Floor Sealer (50 microns per coat) and 1 coat of Pro Epishield SL Coating (3 mm per coat) including levelling, cleaning the floor surface, treating contraction and expansion joints by filling with approved filler, applying primer coat, etc the finished floor display good abrasion resistant & Monolithic Joint less surface having Mechanical / Physical Properties such as 1. Abrasion Resistance ~ 0.8mm thickness loss (According to IS 1237 – 1980 and IS 9162 - 1979) 2. Chemical Resistance to many chemicals 3.Thermal Resistance Exposure with Dry heat Permanent +50°C as per approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges and all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In charge.make:CIPY,SCHOMBURG,BERGER or other equivalent
1500
-
1361.1
Providing and laying 3.05 mm chem resist Epoxy Floor coating: Recommended system: 1 coat of Pro Epishield Floor Sealer (50 microns per coat), 1 coat of Pro Epishield SL Coating (2.5 mm per coat), 1 coat of Pro Epishield NE-100 (500 microns per coat), including levelling, cleaning the bed surface, treating contraction and expansion joints by filling with approved filler, applying primer coat, etc.having Mechanical / Physical Properties such as Abrasion Resistance ~ 0.8mm thickness loss (According to IS 1237 – 1980 and IS 9162 -1979), Chemical Resistance to many chemicals, Thermal Resistance Exposure with Dry heat Permanent +50°C. The finished floor display good abrasion resistant & Monolithic Jointless surface as per approved by Engineer-in-charge, including all incidental and operational charges, Transportation ,labour charges, all taxes but Excuding GST etc.,complete for finished item of work for all floors and all levels as directed by Engineer In charge.MAKE:CIPY,MYK SCHOMBURG or other equivalent.
220
-
1597.9
Providing and Preparing the surface with 10.50 mm thick Engineering wooden flooring, underlaying with moisture barrier sheet of 0.20 mm thick laying on existing surface,and 2 mm thick PE Foam below flooring and using the accessories like skirting (upto 75 mm thick), beading, end profiles and T-profiles, with approved make as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST, for complete for finished item of work for all floors and all levels as directed by Engineer In-Charge. Make: ARMSTRONG, FLORTEX or other Equivalent
150
-
3706.8
Providing and laying of Step Entrance matting system (Walk of Mat) 1 feet by 10 feet roll of 6mm thick, click profile, textile inserted into the aluminium profile retainer, installed flush to finish floor. Before laying the flooring, it shall be ensured that the base floor is clean, level and thoroughly dry, including all incidental and operational charges, Transportation, labour charges and all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as per approved drawing colour and shade by Engineer in charge. Make: Bottom line, 3M, or Equivalent
35
-
14617.5
PAINTING
-
-
-
Painting to new walls with 2 or more coats of Acrylic interior emulsion paint to all masonary walls of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges ,all taxes but excluding GST etc.,complete for finished item of work as per SS 912 for internal walls for:-Interior Colouring - Plastic emulsion paint - 3 Coats.
3500
-
208.3
PARTITION WALL
-
-
-
Supply, Providing, Making and Fixing of 98 mm thick partition using with Two numbers of 9 Ply -12 mm thick Plywood each side (2x12+50+2x12mm) conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50mm X 50mm X 1.2mm thick for horizontal and vertical section with interval of 600mm C/C both ways and using with necessary heavy duty Aluminium cleats of size 35mm x 35 mm equal angle with minimum 3 mm fixing with necessary screws, the air gap between the boards is packed with Acoustical polyster micron wadding infill of 1000 GSM 50mm thick synhetic PF 10 X 50 of anutone, Aluminium skirting for the partion two sides of 75mm height of thickness not less than 1.4mm thick, including providing necessary cutouts to facilitate ducts, socket, junction boxes for electrical requirements as per the approval of Engineer in charge and as per approved drawing, including nails adhseive as approved by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges,all taxes except GST etc, complete as directed by Engineer-In-Charge for finished item of work for all floors and at all levels.
600
-
6008.6
Supply, Providing, Making and Fixing of 86 mm(18+50+18mm) thick partition( using with One numbers of 18 mm thick OSB Board base frame using Aluminium section of size 50mm x 50mm x 1.2 mm thick for horizontal and vertical section with interval of 600mm C/C both ways and using with necessary heavy duty Aluminium cleats of size with minimum 3 mm fixing with necessary screws, the air gap between the boards is packed with Acoustical polyster micron wadding infill of 1000 GSM 50 mm thick synhetic PF 10X50 of anutone, Aluminium skirting for the partion two sides of 75 mm height of thickness not less than1.4 mm thick, including providing necessary cutouts to facilitate ducts, socket, junction boxes for electrical requirements, as per the approval of Engineer in charge and as per approved drawing, including nails adhseive as approved by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer In Charge for finished item of work for all floors and at all levels.
250
-
3262.4
Providing and fixing of Wall Cladding with Using 18mm thick OSB Board wall cladding using with base frame work with Aluminium box section of size 50mm x 25mm x 1.2 mm for horizontal & vertical section with interval of 600mm C/C both ways and using with necessary heavy duty Aluminium equal angle cleats of size 35mm X 35mm X 3 mm fixing with necessary screws. The framework shall be fixed to the wall with necessary horizontal & vertical supporting members using anchor fasteners to hold the framework and the surface of the Aluminium frame work to be cladded with 18 mm thick OSB board by using heavy duty aluminium equal angle cleats of size 35mm X 35mm X 3 mm and steel screws as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation, labour charges and all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
500
-
1946.7
Supplying and fixing in position Toilet Cubicle size (not less than 900mm width not less than 1200mm of depth )upto of 1200mm wide X 1500 mm Length X 2100mm Height, including the bottom gap of 100mm of approved make (of following standard dimension which includes door size of 600mm X 1950mm Height, providing Cuboid Intermediate Panel, Pilaster and Door: Intermediate panel is one continued panel without any joints,all intermediate panels, panels, pilasters and doors shall be 12mm thk with edges chamfered. The solid compact laminate ( Phenolic Core Board) is based on thermosetting resins, homogeneously reinforced with cellulose fibres. Top surface on both sides is melamine coated which is scratch and impact resistant. As per Bureau of Indian Standards IS 2046 : 1995,all pilasters are to be supported by adjustable foot and non corrosive inserts. Top rail and wall fixing with and exterior polyamide coating guarantees resistance to breakage, heat, humidity and chemicals. The base of the adjustable foot will be anchored to the floor with a clearance height of 100mm. Aluminum U- Channel will be used for the fixing intermediate panels to the wall.
Cubicle should contain the following:
(a) SS Adjustable legs- 2 nos -(316 grade) (b) SS Spring Hinges -3 nos- (304 grade) (c) SS Door Knob-1 nos- (304 grade) (d) SS Coat Hook- 1 nos - (304grade) (e) SS Privacy Thumb turn - 1 nos -(304grade)
25
-
25850
Providing Aluminium Profiles:Aluminum U- Channel will be used for the fixing of intermediate panels to the wall. Aluminium h -channel will be provided to the pilasters to enable the closing of the door. Aluminium Top Rail will be provided on top of the pilasters from end to end enabling a rigid construction of the entire cubicle.
Cubicle contain the following ANODIZED ALUMINIUM PROFILES:(a) U-Profile( b) H-Profile (c) L-Profile (d) Top Rail (e) Door stopper lining, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer In-Charge for finished item of work for all floors and at all levels
-
-
-
Providing and Fixing of Operable Wall(Movable Wall) of size 14425mm x 2700mm consisting of 85 mm thick individually movable elements with sound insulation upto 45dB tested in a third party laboratory as per EN Standards, suspended from a top track only without floor guides. Each panel to have top and bottom operable pressure seals operated by a crank handle to ensure optimum contact pressure of up to 800N.(Sweep seal is not allowed as it decreases the efficiency of the wall).The elements must be inter-connected by means of a positive locking concave/convex trapezoidal aluminium profile integrated with Magnetic Profile. Elements must be constructed of a non-deflecting steel tube frame and aluminium profiles, bolted together. The frame must be clad either side with Double Clad 16mm MDF panels hung in acoustic isolation from the frame and allowed to vibrate independently of the frame. The facia panels must also be easily removable without requiring to dismantle the movable wall element for service/ maintenance purpose. The panel must be filled with high density rock wool in accordance with the specified sound insulation requirements. The Telescopic Element must open and close 120mm and must be operated by a single mechanism for both the top and bottom seals and the travel of the telescopic sleeve.The telescopic element must maintain all the same quality criteria as the other elements.
1
-
1640894.8
The Acoustic Movable Wall partition should be have test certificate produced by a third party carried out in the test laboratory, accredited to DAP. The weighted sound reduction index Rw (dB) is determined in accordance with EN 20140 – 3 of approved Make as per the approved drawing including openable door of required size, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer-In-Charge for finished item of work for all floors and at all levels(excluding the supporting secondary structural steel work over the movable partition to the true ceiling structure extra, Baffle work and finishes) Operable Wall(Movable Wall) of size 14425mm x 2700mm
-
-
-
HPL 6mm: Supply and Installation of Compact laminate with high pressure acrylic resin with high pressure and temperature and hardened ,Aluminum base frame Work with sections 38MM x 38MM x 1.6MM and 63MM x 38MM x 1.6MM with aluminium black powder coated channel using galvanized for MS brackets of size 75MM x 50MM x 6MM - M10 and M8 bolts and nuts, 3M structural glazing double sided adhesive tape, dow corning 896 panel fix silicone sealant along with Fixed point sleeve and Anchor Bolts /Fasteners, self screws and separators with necessary Brackets, Anchor Bolt, Aluminum frame and Other Hard ware, colour and pattern of the HPL as per the approved drawings as per the directions of the engineer-in-charge, including all incidental and operational charges, Transportation ,labour charges and all taxes Excuding GST, for complete for finished item of work for all floors and all levels as directed by Engineer In Charge
530
-
5444.6
Providing and fixing of Wall Cladding 4mm thick using Laquered Glass with base frame using 12 mm thick Plywood conforming to IS:303 MR Grade and exposed surface of the Plywood is finished with 4 mm thick using Laquered glass with necessary fittings Brackets, studs of SS/GI, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST etc.,complete for finished item of work for all floors and all levels as directed by Engineer-In-Charge
260
-
3775.3
Providing and fixing of Tackable Surface of Felt Panel 9mm thickness over soft board of MDF Board: Plain-Interior -9 mm thick conforming to IS 15932, in position layer of Sound Insulating Self Adhesive screens on the internal sides of the partition as per approved Drawing. Felt panels should have an acoustical rating NRC 0.50 SAA 0.50 and the shade of the fabric shall be approved by Engineer In Charge, including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
260
-
2117
Modular Double Glazed Partition with Natural Anodised aluminium profile sections (Rate not to include above ceiling partitions) - Maxium 2750mm ht, Supply and installtion of double glazed partition using 1 layer of 10mm thick toughened glass + 55mm Air gap + 1 layer of 10mm thick toughened glass and fixed wtih proprietary Black Anodised aluminium sections of size 80mmx 30mm as per architects approval. Alloy make 80mm x 30mm System, using DSG-09, DSG-10, DSG-12 and DSG-20 with cliplock as top & Bottom channel, wall starter. Rate to include required accessories as per the manufacturers specifications and shall be inclusive of all accessories like rubber gasket etc,. Glass panels to be of maximum sizes and it should be executed strictly as per detailed drawings / elevations and as per architects approval. RATE NOT TO INCLUDE DOOR FRAMES. Rate to include 'I' section, 'L' section, 'T' section. The glass to glass joints to be bonded with " I section" and 3M VHB double side tape with room temperature and dust free including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST etc., as per the approved shop drawing by the Engineer-in-Charge complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
560
-
12986.6
Providing and fixing of fully glazed Fixed Partition of 2700mm height, made with 10mm clear toughened glass panels held in position as per the detail drawings. The glass shall be held at top throughout the length with Bulk head per drawing, the glass shall be held at top and bottom throughout the length with 45mm x 25mm Profile Made with 10mm thick clear toughened Glass using 45.02+45.04 as wall starter channel and 45.05 +45.06 top & bottom channel. Finish – Black anodized sandblasted profiles. glass to glass butt joint with I Joint Glass type- 10mm thk toughened glass with approved EPDM Gasket silicone sealant as per the detailed drawing. DORMA Alexa Junction profile or equivalent to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness 20 micron black anodized. For glass partitions division, including all incidental and operational charges, Transportation, labour charges and all taxes but Excuding GST, complete for finished item of work for all floors and all levels as directed by Engineer In Charge. Approved manufacture for Profile: Dorma or equivalent. Approved manufacture for Glass: Saint Gobain or equivalent
540
-
4623.3
Providing and fixing of Fire Rated Glass Partition for Staircase, made with 11mm, toughened interlayered glass with 120min integrity panels held in position as per the detail drawings. The glass shall be held at top throughout the length with Bulk head per drawing, the glass shall be held at top and bottom throughout the length with single rebate Frame Profile of 125 x 60mm of 1.60mm GI sheet with necessary foam to cushion the glass at the bottom and sealed with approved silicone sealant,the steel profile shall be tested with contraflam lite 60 as per EN 1363-1/EN 1634-1 to validate its fire resistance. The system shall be certified to provide intergrity and radiation control fire protection rating for duration of 120 minutes. The glass should be Contraflam Lite 11mm clear (EW120) - 120 min fire rated laminated glass made from two layers of fully clear tempered flot glass with vetrotech intumescent interlayer; complying with impact safety requirement in EN 12600 FOR 1(B) 1 category. Product complying with EN 14449 Standard for laminated safety glasses, Complies with radiation limitation of maximum 15KW/sqm measured at 1m distance.(EW 120) including all incidental and operational charges, Transportation ,labour charges and all taxes Excuding GST, for complete for finished item of work for all floors and all levels as directed by Engineer In Charge
90
-
40452.7
CEILING
-
-
-
Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspendind the frame work using intermediate channels (45mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 51.5mm x 26mm x 10.5mm x 0.55mm ) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound, two coats of dry wall top coat including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer-In-Charge
400
-
1076.8
Supply, fixing and Installation of Acoustic Baffle Ceiling with square edges , square edge, fabric wrapped pinewood fiber acoustic baffle of size 600mm x 1200mm x upto 50mm thick, plain surface finish, volume density ~300Kgs/m3, weight ~15kg/m2 , Fire (Class) – 1, Acoustics – NRC ~0.75,Thermal conductivity (W/mk)– 0.07, Climate (°C, RH) – 50, 95, Light reflectance (%) – colour dependant, Green (VoC, RC %) – Low, 30 suspended individually and vertically with pre-fixed D-rings by using hooks, levelling clip and hanger wires, Hanger Wire to be first dropped from the slab to desired height as directed by Engineer-In-Charge, as per approved drawing with suitable Anchor bolts and S hook then hung using the D-rings and hanger wires upto 50mm thickness of bare Panels, 6mm for plane fabric colour, as directed by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer-In-Charge for finished item of work for all floors and at all levels
100
-
4510
Supply, fixing and Installation of Wooden Grid Ceiling in module of size 128mm x 2440mm x 15mm and density of 830 Kgs/M3 works SL2 edge Suspended Ceiling System. The tiles with visual pattern G14 or any equivalent channel with approved Wood Veneer (Maple, Dark Bamboo, Red beech, US Cherry) finish would have an NRC of 0.7, Humidity Resistance (RH) of 90%, Fire Performance Class 1(BS - 476).The grid with web height of 38 mm and 24mm wide Prelude 38 section flanges.The grid shall have a load carrying capacity of 15.5 Kgs/M. The Sections have a Galvanizing of 90 grams per M2 having pull out strength of 100 Kgs.
200
-
5326.2
Installation: Using the C-Channels of size 3000 mm Long spaced with 1200 to 1500 mm with predrilled at every 600 mm and the first and last at 300 mm spacing. The C Channel securely fixed to the structural soffit by using C-channel hangers and min.6mm dia threaded rod & approved hangers. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector splice for joining two pieces of C-channels. T Bar Suspension clips to be screwed in each of the predrilled holes on the C Channel using a 12mm self tapping screw. The main runner to be suspended by passing it through the T bar suspension clip. The 600mm stabilizer bars to be placed at the bulb of the main beam at every 1200mm. The 300 mm x 1200 mm Woodworks tiles to be laid by sliding SL2 edge of the tile on the main runner which is spaced at 600mm. Perimeter trim to be axiom trims, powder coated matt black, secured at 450mm maximum center to center distance
-
-
-
Suspension system: Using with the M6 Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26mm x 26mm x 25mm x 1.2mm with a Galvanized Thickness of 80gsm, a pre Straightened Hanger wire of dia – 2.65 mm of 1.8 m length, thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner to facilitate the any ducts, socket, junction boxes for electrical requirements as per approved drawing and as directed by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes except GST etc, complete as directed by Engineer In-Charge for finished item of work for all floors and at all levels
-
-
-
BLINDS
-
-
-
Providng and installation of manually operated Roller blinds, the fabric shall be type, the fabric shall be vinyl coated fiberglass with a minimum weight of 340 gm per sqm, thickness not less than 0.35 mm and Fabric classification MI. The Blinds shll be fixed using specified channels and as per specification, including all accessories etc. all complete colour texture and style shall be got approval from NIB, complete work for purpose of payment, Height and width of Roller Blinds shall be measured including cost and conveyance of all materials, all incidental and operational charges, all labour charges, including installation charges, all taxes but excluding GST etc., complete for finished item of work as directed by the Engineer-in-Charge.Make: AD, SURGE FERE, HUNTER DOUGLAS
100
-
1864.1999999999998
DOORS
-
-
-
Hollow Metal Doors Single Leaf: Providing and fixing of Single leaf Hollow metal fire rated doors as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Independent glass test certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Shakti Hormann or approved equivalent. Door frame shall be double rebate frame profile of size 143 x 57mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be filled with PUF or with cement and sand slurry as approved by the Engineer-in-Charge. Make: Shakti Hormann or equivalent
1
-
24078.8
Door leaf shall be 46mm thick fully flush double skin door with vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement.The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Approved hardware make : Hormann or equivalent.
HOLLOW METAL SINGLE LEAF DOOR OF SIZE 1200MM X 2400MM
-
-
-
Hollow Metal Doors Double Leaf: Providing and fixing of Double leaf Hollow metal fire rated doors as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates should be available for vision lites /panels as part of the fire door assembly. Independent glass test certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Shakti Hormann or approved equivalent. Door frame shall be double rebate frame profile of size 143 x 57mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be filled with cement and sand slurry as approved by the Engineer-in-charge. Make: Shakti Hormann or equivalent
4
-
36290.9
Door leaf shall be 46mm thick fully flush double skin door with vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement.The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule including cost and conveyance of all materials,all incidental and operational charges,labour charges for installation,all taxes except GST etc.,complete for finished item of work as directed by the Engineer-in-Charge. Approved hardware make : Hormann or equivalent
HOLLOW METAL DOUBLE LEAF DOOR OF SIZE 1800MM X 2400MM
-
-
-
Hollow Metal Doors single leaf with Kick Plate: Providing and fixing of Single leaf Hollow metal fire rated doors with kick plate as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates should be available for vision lites /panels as part of the fire door assembly. Independent glass test certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Shakti Hormann or approved equivalent. Door frame shall be double rebate frame profile of size 143 x 57mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be filled with PUF or with cement & sand slurry as approved by the Engineer-in-charge.Make: Shakti Hormann or equivalent
2
-
26134.899999999998
Door leaf shall be 46mm thick fully flush double skin door with vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement.The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. The Doors to have a 18G SS kick plate in the bottom with counter sunk holes for fixing including cost and conveyance of all materials,all incidental and operational charges,labour charges for installation,all taxes except GST etc.,complete for finished item of work as directed by the Engineer-in-Charge.Make: Shakti Hormann or equivalent
HOLLOW METAL SINGLE LEAF DOOR OF SIZE 1200MM X 2400MM
-
-
-
Hollow Metal Doors Double leaf with Kick Plate: Providing and fixing of Double leaf Hollow metal fire rated doors with kick plate as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates should be available for vision lites /panels as part of the fire door assembly. Independent glass test certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Shakti Hormann or approved equivalent. Door frame shall be double rebate frame profile of size 143 x 57mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be filled with PUF or with cement & sand slurry as approved by the Engineer-in-Charge. Make: Shakti Hormann or equivalent
1
-
40403.2
Door leaf shall be 46mm thick fully flush double skin door with vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement.The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. The Doors to have a 18G SS kick plate in the bottom with counter sunk holes for fixing as per the approved drawing.Make: Shakti Hormann or equivalent
HOLLOW METAL DOUBLE LEAF DOOR OF SIZE 1800MM X 2400MM
-
-
-
Supply and Fixing of Single door with flush shutter of size 0.90mx2.40m with best Teak Wood frame of size 100X62.5 mm, Flush shutter of solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame to the wall with Fixtures of of 3 Nos of 125 mm long SS double ball bearings hingess,1 Nos of 250 mm Long SS Tower Bolt, 2 Nos of 150 mm Long SS Handle, 1 No of Heavy duty mortise lock 6/7 levers (IS:2209) with CP with heavy handles, 1 No of Aluminium Extruded Door Stopper of heavy duty with necessary accessories and screws etc. complete (Type-2: for width of doors up to 1000 mm),1 No of Rubber Buffer, 3 Nos of MS Z hold Fasts 300 MM Long as per approved drawing including Labour charges for wrought and put up and fixing in position, including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
WOODEN SINGLE LEAF DOOR OF SIZE 900MM X 2400MM
16
-
13509
Supply and Fixing of Single door with flush shutter of size 0.75mx2.40m with best Teak Wood frame of size 100X62.5 mm, Flush shutter of solid bond wood block board type with teak ply on both faces.: 35 mm thick conforming to IS:2202, fixing door frame to the wall with Fixtures of of 3 Nos of 125 mm long SS double ball bearings hingess,1 Nos of 250 mm Long SS Tower Bolt, 2 Nos of 150 mm Long SS Handle, 1 No of Heavy duty mortise lock 6/7 levers (IS:2209) with CP with heavy handles, 1 No of Aluminium Extruded Door Stopper of heavy duty with necessary accessories and screws etc. complete (Type-2: for width of doors up to 1000 mm),1 No of Rubber Buffer, 3 Nos of MS Z hold Fasts 300 MM Long as per approved drawing including Labour charges for wrought and put up and fixing in position, including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
WOODEN SINGLE LEAF DOOR OF SIZE 650MM X 2400MM
6
-
11066.9
Providing and fixing single leaf aluminium framed glass door 1200 X 2400 mm with Glass infill of 10 thk toughened glass with DORMA Alexa System-100 or equivalent frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Alexa STP100 Door Profile frame or equivalent with clips & seals with DORMA or equivalent Flush Hinges (3Nos) & Pure 8906 Lever Handle 952 Narrow stile Lock package/TG 9300 Pull Handle 917 Narrow stile Dead Lock package and DORMA ITS 915 EN4 Cam Action Concealed Door closer (as per EN 1154) or equivalent with Hold Open unit necessary seals to be provided all around the door frames. For doors part of single/double glazed partiton DP100-SG/ DG Door rebate profile to be used.In case of Glass overall panel Alexa OHPDP 100-SD/DG Over Panel Door profile or equivalent to be used. The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. The overall cost to include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge. All Profiles to be with 2 mm Gauge thickness anodized black.
Single leaf aluminium framed glass door 1200 X 2400 mm
18
-
61600
Providing and fixing of the following Double Leaf Aluminium Framed glass door with Glass infill of 10 thk toughened glass with DORMA Alexa System-100 or equivalent frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Alexa STP100 Door Profile frame or equivalent with clips & seals with DORMA or equivalent Flush Hinges (3Nos) & Pure 8906 Lever Handle 952 Narrow stile Lock package/TG 9300 Pull Handle 917 Narrow stile Dead Lock package and DORMA ITS 915 EN4 Cam Action Concealed Door closer (as per EN 1154) or equivalent with Hold Open unit necessary seals to be provided all around the door frames. For doors part of single /double glazed partiton DP100-SG/DG Door rebate profile to be used.In case of Glass overall panel Alexa OHPDP 100-SD/DG Over Panel Door profile or equivalent to be used. The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. The overall cost to include cost and coneyance of all materials to site, all labour charges, all taxes etc complete for finished item of work as directed by the Engineer In charge. All Profiles to be with 2 mm Gauge thickness anodized black.
-
-
-
Double Leaf Aluminium Framed glass door 1800 X 2400 mm
13
-
104720
Double Leaf Aluminium Framed glass door 2400 X 2400 mm (As per approved drawing 300mm fixed on either side of door with openable 1.8*2.4 double door)
2
-
108900
Supply and fixing of perforated Rolling shutter of size of 4040MM X 3000MM, constructed from single skinned bright steel galvalume laths. Each lath is retained by interlocking with each other. The surface is bright steel with one coat of grey epoxy primer by spray, 0.8 mm thick lathes with mild steel support brackets spray painted with one coat of grey epoxy primer. The shaft is manufactured from mild steel tube of suitable outside diameter. The side guides are 2mm thick heavey duty TG Galvanaised steel, bottom profile is bend resistant double skinned extruded aluminium profile for additional strength. The bottom rail is fitted with extruded rubber bottom seal that will seal against the floor when the door is fully closed. The cost to include CE certified european make direct dirve operator, (motorised with power necessary control system) 1 HP motor with necessary socket, push botton of 16A upto 5M three station push botton with deadman control, ball bearings, all accessories include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge. Make: Gandhi, Shakti Hormann or equivalent.
ROLLING SHUTTER OF SIZE 4040MM X 3000MM
2
-
168740
Supply and fixing of Perforated Rolling shutter of size of 3380MM X 3000MM, constructed from single skinned bright steel galvalume laths. Each lath is retained by interlocking with each other. The surface is bright steel with one coat of grey epoxy primer by spray, 0.8 mm thick, with mild steel support brackets spray painted with one coat of grey epoxy primer. The shaft is manufactured from mild steel tube of suitable outside diameter. The side guides are 2mm thick heavey duty TG Galvanaised steel, bottom profile is bend resistant double skinned extruded aluminium profile for additional strength. The bottom rail is fitted with extruded rubber bottom seal that will seal against the floor when the door is fully closed. The cost to include CE certified european make direct drive operator (motorised with power necessary control system), three station push botton with dead man control, ball bearings, all accessories include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge.Make: Gandhi, Shakti Hormann or equivalent.
ROLLING SHUTTER OF SIZE 3380MM X 3000MM
1
-
143660
Supply and fixing of manual folding-sliding panel partition (3+0) WINGS 2000 mm x 2400 mm with stile shutter of 70 x45 mm system with 10mm thick toughed glass covered with Glass beed and door frame of 100 x 25mm system with flush top and hanged on one side with alloy propritory hinges, Sliding folding tracker roller position at the end of every second panel, without floor guide, with aluminium track rail 75 x 75mm, with the all-glass look, prepared for underbolting to aligned substructure by others, Folding panels with integrated face-mounted security floor bolts engaging in recessed floor bushings which cannot be operated from the outside,Panels equipped with easy-action plastics-tyred track rollers and top brush seals, Two-part glazing rails top and bottom can be aligned with the panels hung using alternate-side screw fixings, Thickness of glass is 10mm minimum EPDM gasket wherever necessary include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge.
Manual folding-sliding panel partition (3+0) WINGS 2000 mm x 2400 MM
7
-
143880
Supply and fixing of manual folding-sliding panel partition (2+0) WINGS 900 mm x 2400 mm with stile shutter of 75 x45 mm system with 10mm thick toughed glass covered with Glass beed and door frame of 100 x 25mm system with flush top and hanged on one side with alloy propritory hinges, Sliding folding tracker roller position at the end of every second panel, without floor guide, with aluminium track rail 75 x 75mm, with the all-glass look, prepared for underbolting to aligned substructure by others, Folding panels with integrated face-mounted security floor bolts engaging in recessed floor bushings which cannot be operated from the outside,Panels equipped with easy-action plastics-tyred track rollers and top brush seals, Two-part glazing rails top and bottom can be aligned with the panels hung using alternate-side screw fixings, Thickness of glass is 10mm minimum EPDM gasket wherever necessary include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge.
Manual folding-sliding panel partition (2+0) WINGS 900 mm x 2400 mm
9
-
103840
Supply and fixing of Sliding Door system of two track - Four Panels (End Shutter Fixed) of 6000 mm x 2750 mm centre opening clear,Modular Aluminium single Glazed Sliding door with Roller and track in the ceiling and Guides given on the Floor to manual movement and sliding door hardware,Black anodized sand blasted finish, Stile Door of - 70 x 45mm Using 70.01,70.02, 70.04 &70.07 glass bead horizontal bottom & Top with 10mm thick toughened glass having rubber gasket, Offset hadle 600mm, Drop seal and Lock Set,single glazed partition frame of Alloy make 45mm x 25mm System, Made with 10mm thick clear toughened Glass using 45.02+45.04 as wall starter channel and 45.05+45.06 top & bottom channel. Finish – Black anodized sandblasted profiles. glass to glass butt joint with I Joint Glass type- 10mm thick toughened glass.(Model: Grunn Slimline Series, Slimline Sliding System) of approved color with aluminium track rail, 72 x 75 mm, 12mm Air Gap 6mm Clear, packing tape, Masking Tape and any other accessories and hardware as requried include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge. Handle / Lock: Cremone, Handle Roller: Double Adjustable, Roller
1
-
140030
Providing and fixing of tested 2 hours Fire rated Glass door of size 1200 mm x2100mm of Dorma/ Signum / Promat or equivalent make fully glazed Forster Presto in a complete profile system with fitting and accessories for flush fitting door in stainless steel profile grade 304/Grade 316. The steel profile shall be tested with contraflam lite 60 as per EN 1363-1/EN 1634-1 TO validate its fire resistance. The system shall be certified to provide intergrity and radiation control fire protection rating for duration of 120 minutes. The glass should be Contraflam Lite, 11mm clear 120 min fire rated laminated glass made from two layers of fully clear tempered flot glass with vetrotech intumescent interlayer; complying with impact safety requirement in EN 12600 FOR 1(B) 1 category installed in a double glazed unit. Product complying with EN 14449 Standard for laminated safety glasses, Complies with radiation limitation of maximum 15KW/sqm measured at 1m distance.(EW 120)
6
-
110113.70000000001
This also includes providing necessary proprietary hardware like handles, lock, hinges, door closer, door guide,drop seal for acoustic etc., as per the direction of the Engineer-in-charge. The shop drawing shall be submitted for approval of the Engineer-in-charge. Please note this also includes providing necessary arrangements for housing the Access control system.
-
-
-
Frames to be assembled at site with aid of roofing bolts. Door Frames and shutters to be suitably packed in.cardboard boxes made of adequate thickness as per the standard specifications for safe storage at site. This also includes providing, storage and fixing the hardware like Door closer, Locks, Handles, Tower bolts, Door stoppers, Drop down seal at bottom of shutter etc complete as per the detail drawings.The frame shall be filled with cement screed infill as per the detailed drawing. Note: Please note this also includes providing necessary arrangements for housing the Access control system. The shop drawing as per the aproved drawings include cost and coneyance of all materials to site, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer In charge.
-
-
-
Providing and fixing Shaft door of size 600 x 1200mm single leaf door of GI Frame 1.60mm and GI Shutter of 1.20mm thickness, Active Shutter width of 502 mm and Frame Profile of 125 x 60mm, Single frame Rebate and with double skin shutter made with 1.2m thick over all thcickness not less than 42 ,honey comb infill including providing necessary proprietary hardware like handles, lock, hinges, door closer, door guide, drop seal for acoustic etc., as per the standard specification, shop drawing as per the aproved drawings include cost and coneyance of all materials to site, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer In charge.
19
-
7474.6
Providing and fixing Shaft door of size 1200 x 1200mm Double leaf door of GI Frame 1.60mm and GI Shutter of 1.20mm thickness. Active Shutter width of 548 mm and Frame Profile of 125 x 60mm, Single frame Rebate and with double skin shutter made with 1.2m thick over all thcickness not less than 42material,honey comb infill. This also includes providing necessary proprietary hardware like handles, lock, hinges, door closer, door guide, drop seal for acoustic etc., as per the manufacturers specification. The shop drawing as per the aproved drawing include cost and coneyance of all materials to site, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer In charge.
3
-
13029.9
MILL WORK
-
-
-
Supply,providing and making Kitchen Storage unit of size 5170mm(L) X 675 mm (D) X 2400(H) with using 19 mm thick plywood conforming to IS:303 BWR Grade for outer frame of the storage unit with 20mm thick engineering Granite and horizontal portion of the storage unit,and internal partition of storage unit and internal surface of the storage unit is finished with 1 mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, providing 4 Nos of horizontal partition of size 5170 mmX 675 mm using 19 mm thick plywood conforming to IS:303 BWR Grade,9 Nos vertical partition in the storage unit for bottom storage unit of sizes 900mm X 675 mm and top of the storage unit of size 600mm x 675 mm with using 19 mm thick plywood conforming to IS:303 BWR Grade and Horizontal partition of the storage unit of 10 Nos of size 479mmx675 mm with using 19 mm thick plywood conforming to IS:303 BWR Grade ,and providing 8 nos of Door shutter of size 517 mmx 900 mm and 6 nos of draw unit with using 19 mm thick plywood conforming to IS:303 BWR Grade , for the bottom portion of the storage unit ,and 10 Nos door shutters of size 517 mm X 600 mm for the top portion of the storage unit using with 19 mm thick plywood conforming to IS:303 BWR Grade ,top of the bottom storage unit is finished with Engineering Granite of 20 mm thick,For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick, including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter, MS-Powder Coated Door Handles of 125 mm thick,2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit,adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge Excluding GST
1
-
162098
Supply, providing and making, Pantry Storage Unit of size 3750mm (L) x 600mm(D) x 2700mm (H) :Pantry counter using with 19mm thick plywood conforming to IS:303 BWR Grade for outer frame of the pantry counter and horizontal portion of the pantry counter, for internal partition of pantry counter and internal surface of the storage unit is finished with 1 mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, providing one side of the pantry counter opening provision for fridge of size 610 mm (L) X 675 mm (D) X 1800 (H),Dish wash of size 600 mm (L) X 675 mm(D) X1215 (H), Micro Oven of size 600 mm (L) X 675 mm (D) X 585 mm(H), providing for upper portion of the pantry counter with 5 nos of door shutters of size 508 X 600 mm using 19 mm thick plywood conforming to IS:303 BWR Grade , and for bottom portion of the pantry counter with 4 nos of door shutters of size 508 X 600 mm using 19 mm thick plywood conforming to IS: 303 BWR Grade and 1 Nos of Draw units of size 508 X 600 mm using 19 mm thick plywood conforming to IS:303 BWR Grade, top of the pantry counter is finished with Engineering Granite of 20 mm thick, For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick, including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter,MS-Powder Coated Door Handles of 125 mm thick,2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit, adhesive,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation, labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge
2
-
131958.7
Supply,providing and making Conference Room Pantry Unit of size 9500 mm (L) x 600 mm (D) x 2700 mm (H) using with 19 mm thick plywood for outer frame of the pantry and horizontal portion of the pantry and internal partition of pantry counter,Storage unit is finished with 1 mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, providing one side of the conference room pantry opening provision for fridge of size 610 mm (L) X675 mm(D)X1800 (H),Dish wash of size 600 mm (L) X675 mm(D) X1215 (H), and Micro Oven of size 600 mm (L)X 675 mm (D)X 585 mm(H), providing for upper portion of the pantry counter with 16 nos of door shutters of size 518X600 mm 19 mm thick conforming to IS:303 BWR Grade ,and for bottom portion of the pantry counter with 12 nos of door shutters of size 518X 600 mm and 4 Nos of Draw units of size 518X600 mm conforming to IS:303 BWR Grade,top of the conference room pantry counter is finished with Engineering Granite of 20 mm thick of approved colour as directed by Engineer in Charge,For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick, including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter,MS-Powder Coated Door Handles of 125 mm thick, 2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit,adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge Excluding GST .
1
-
337912.1
Providing and Making Repro counter unit of size 3960mm (L) x 600mm(D) x 865mm (H) making with 19 mm thick plywood conforming to IS:303 BWR Grade grade using for horizontal portion of the Repro counter, for internal partition of repro counter using with 12 mm thick plywood and internal surface of the repro counter is finished with 1 mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315,top of the repro counter is finished with Engineering Granite of 20 mm thick of approved colour as directed by Engineer in Charge providing 6 Nos of door shutters of size 660 x900 mm usign with 19 mm thick plywood conforming to IS:303 BWR Grade and 2 nos of draw unit of size 660x900 mm with 19 mm thick plywood conforming to IS:303 BWR Grade,For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick, including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter,MS-Powder Coated Door Handles of 125 mm thick,2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit,adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge Excluding GST.
9
-
94783.6
Providing and Making of Library Long Rack of size 3000 mm (L) 400mm(D) X 8255mm (H): making with 19 mm thick plywood conforming to IS:303 BWR Grade grade using 6nos of verticals of size 600mm (L)x 8255 (H) and the Horizontal of 21 Nos of size 600 mm X 3000 mm, forming the Grid of size 600 mm (L) X 600 mm (D) X 400mm (H) exposed surface is finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, of approved colour as directed by Engineer in charge, including providing and fixing necessary hardware, edge banding adhesive ,nails etc, as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation, labour charges, all taxes but except GST etc, complete for finished item of work for all floors and at all levels.
2
-
311137.2
Providing and Making of Library short Rack of size :4760 mm (L) X 300(D) X 2100 (H): making with 19 mm thick plywood conforming to IS:303 BWR Grade grade using for 7nos of verticals of size 300 mm (L)x 2100 (H) and the Horizontal of 6 Nos of size 300 mm X 4760 mm,forming the Grid of size 793 mm (L) X 300 mm (D) X 387 mm (H),12 nos of door shutters of size 396 mmx 450 mm ,exposed surface is finished with Teak Veneer Lamination upto 4 mm thick with Natural Grains conforming to IS 14315, internal portion is finished with 1mm thick laminate, of approved colour as directed by Engineer in charge For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick, including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter, MS-Powder Coated Door Handles of 125 mm thick, 2 nos of Magnetic catchers for each shutter, draw chanel for draw unit, adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation, labour charges, etc complete for finished item of work for all floors and at all levels with approved colour /shade as directed by Engineer in Charge .
4
-
91772.5
Supply,providing and making Pottery Storage unit of size 7170 mm (L) X 600 mm (D) X 2400(H) with using 19 mm thick plywood conforming to IS:303 BWR Grade for outer frame of the storage unit and horizontal portion of the storage unit, internal partition of storage unit using with internal surface of the storage unit is finished with 1mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, providing 4 Nos of horizontal partition of size 7170 mmX 600 mm using 19 mm thick plywood conforming to IS:303 BWR Grade, 9 Nos vertical partition in the storage unit for bottom storage unit of sizes 896 mm X600 mm and using 19 mm thick plywood conforming to IS:303 BWR Grade for internal partition,and providing 8 nos of Door shutter of size 896 mmx 900 mm using with 19 mm thick plywood conforming to IS:303 BWR Grade for the bottom portion of the storage unit ,top of the bottom storage unit is finished with Engineering Granite of 20 mm thick of approved colour as directed by Engineer in Charge,For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick , including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter,MS-Powder Coated Door Handles of 125 mm thick,2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit,adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge Excluding GST.
1
-
187764.8
Providing and Making Proto typing Storage unit of size 4140mm (L) x 1080mm(D) x 2400 mm (H) making with 19 mm thick plywood conforming to IS:303 BWR Grade grade using for horizontal portion of the Proto typing Storage ,and for internal partition of Proto typing Storage using with 19 mm thick plywood and internal surface of the Proto typing Storage is finished with 1 mm thick laminate and exposed surface of the storage unit finished with Teak Veneer Lamination of 4 mm thick with Natural Grains conforming to IS 14315, of approved colour as directed by Engineer in Charge providing 7 Nos of door shutters of size for proto typing storage bottom shutters of size 592 mm x 900 mm and top shutters of 7 nos of door shuttersof size 592 mm x 1500 mm usign with 19 mm thick plywood conforming to IS:303 BWR Grade and ,For door shutter frame and draw unit edge banding using with medium teak wood of size 19 X 4 mm thick , including providing and fixing necessary hardware like, 2 nos Box hinges for each door shutter,MS-Powder Coated Door Handles of 125 mm thick,2 nos of Magnetic catchers for each shutter,and draw chanel for draw unit,adhesive ,nails etc as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, etc, for complete for finished item of work for all floors and at all levels with, approved colour /shade as directed by Engineer in Charge Excluding GST
1
-
150336.6
Providing and Making 3D Printing room Storage of size :6000 mm (L) X 600 mm (D) X 1200 mm (H): making with 19 mm thick plywood conforming to IS:303 BWR Grade grade using for horizontal portion,vertical and internal partition of 3D Printing room using with 19 mm thick plywood conforming to IS:303 BWR Grade grade, providing 3 Nos of horizontal of size 6000 mm (L)x 600 mm (D) and verticals 10 Nos of size 600 mm (L) X 1200 mm(D),using with 19 mm thick plywood conforming to IS:303 BWR Grade and ,MS Castors of size 70 mm high with 50 mm dia for Printing room,inclusive of adhesive,nails etc, as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, except GST etc, for complete for finished item of work for all floors and at all levels
2
-
75621.9
Providing and Making Credenza of size :1800 mm (L) X 475 mm (D) X 750 mm (H): making with 19 mm thick plywood conforming to IS:303 BWR Grade grade with Engineering Granite Stone of 20mm thick on top ,using for horizontal portion,vertical and internal partition of Credenza using with 19 mm thick plywood conforming to IS:303 BWR Grade grade, and internal portion of the draw unit is finished with 1Mm thick laminate and exposed surface of the Credenza finished with 2 mm thick veener, of approved colour as directed by Engineer in Charge, providing 3 Nos of horizontal of size 1800 mm (L)x 475 mm (D) and verticals 6Nos of size 580 mm (L) X 475 mm(D),using with 20mm Thick of Engineering Granite Stone19 mm thick plywood conforming to IS:303 BWR Grade and, For Draw shutter frame edge banding using with medium teak wood and PVC Edge banding, including providing and fixing necessary hardware like S.S Legs of size: 30 mm dia with 150 mm height, locks, Pull handles, ball catch, spring loaded Soft closing hinges, soft closing telescopic channels,adhesive ,nails etc,. as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges,except GST etc, for complete for finished item of work for all floors and at all levels
4
-
48939.2
EQUIPMENTS
-
-
-
Built in Refrigerator: Providing and fixing of Built-in-Refrigerator 321 L capacity and of dimensions (HxWxD) 177.2 cm x 55.8 cm x 54.5 cm for the millwork as as per design intent marked in drawings and as per instructions of Engineer-in-Charge,This also includes providing and fixing necessary conduits, drain outlet pipes etc. including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In-Charge for finished item of work for all floors and at all levels Product to match the model SIEMENS KI81RAF30 IQ500.
4
-
93220.3
Built in Oven: Providing and fixing of Built-in-Microwave Oven of capacity 71 L of dimensions (HxWxD) 595 mm x 594 mm x 548 cm for the millwork as as per design intent marked in drawings and as per instructions of Engineer-in-Charge. This also includes providing and fixing necessary conduits, drain outlet pipes etc including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, complete as directed by Engineer In Charge for finished item of work for all floors and at all levelsProduct to match the model SIEMENS BF634LGS1I IQ700.
4
-
71779.7
Built in Dishwasher: Providing and fixing of Built-in-Dishwasher of dimensions (HxWxD) 81.5 cm x 59.8 cm x 55 cm for the millwork as as per design intent marked in drawings and as per instructions of Engineer-in-Charge. This also includes providing and fixing necessary conduits, drain outlet pipes etc. including all incidental and operational charges, Transportation ,labour charges,all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levelsProduct to match the model SIEMENS SN678X02TE IQ700.
3
-
115156.3
Geyser: Providing and fixing of Geyser of 3L capacity for shower areas in the second floor toilets as per design intent marked in drawings and as per instructions of Engineer-in-Charge. This also includes providing and fixing necessary conduits, drain outlet pipes etc. including all incidental and operational charges, Transportation ,labour charges,all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels Product to match the model HAVELLS INSTANIO WHITE BLUE.
2
-
4103
MISCELLANEOUS
-
-
-
Supplying and fixing of Elevator Jamb with SS Sheet/Plate 304 grade to flush with the wall, per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels (For 18SWR(1.22mm)
185
-
705
Supplying and fixing SS 304 Grade Bumper Rail of size 50 mm dia(18 Gauage) with 150 mm High at a distance of 1.20m each vertical of 50mm with 2mm thick connected to the SS base plate with 8 mm thick of size 100mm x100mm including 4 Nos of anchored bolts of each plate,as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels
510
-
705
Supply and Fixing of 6 mm thick Mirror with the base frame of 12 mm thick plywood conforming to IS:303 BWR Grade, with necessary adhesive and nails, as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, complete as directed by Engineer In Charge for finished item of work for all floors and at all levels (Make :Saint Gobain Glass/Equivalent)
30
-
1975.6
Supplying and fixing of 8 mm thick Studded Rubber mat,inclusive of adhesive etc,as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels
300
-
1133
INTERNAL SANITARY AND FITTING SYSTEM
-
-
-
SANITARYWARE AND CP FITTINGS
-
-
-
Supply, Installation and commissioning approved make wash down wall mounted EWC of white colour conforming to IS:2556 (Part 16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap all of approved make including concealed angle cock including cost and conveyance of all materials,all incidental and operational charges,all labour charges,all taxes excluding GST etc. complete for finished item of work as directed by the Engineer-in-Charge.Make: Jacquar, Kohler, Toto, Somany or equivalent.
25
-
10864.4
Supplying and Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc. complete for finished item of work as directed by the Engineer-in-Charge.
21
-
4425.6
Supplying and Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P Spreader fixed with screws complete Indian make:590 x 375 x 390mm including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc. complete for finished item of work of approved make like Hindware,Nycer, Parryware,Cera or equivalent as approved by the Engineer-in-Charge.
18
-
4052.9
Supplying and Fixing premium make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, and with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc. complete for finished item of work as directed by the Engineer-in-Charge Make: Bobrick, Euronics, Jacquar, Kohler, Toto or equivalent
18
-
15128.1
Supply and Fixing of 15 mm brass body Premium variety Chromium plated finish Swan neck tap with right/left hand operating knob with aerator of not less than 500 grams weight quarter turn spindle conforming to IS8931 and with a warranty of 10 years including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc. complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Grohe, Bobrick or equivalent
5
-
1704.5
Supply and Fixing premium make Auto closing system pillar cock for wash basin, and with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc. complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Grohe, Bobrick or equivalent
21
-
2539.6
Supply and Fixing of Stainless steel liquid soap container wall mounted and bottle type including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Bobrick, Euronics, Jacquar, Kohler, Toto or equivalent
18
-
513.8000000000001
Supply and fixing of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Bobrick, Euronics, Jacquar, Kohler, Toto or equivalent
25
-
951.2
Supply and Fixing Stainless steel 4" (101.6) multi floor trap with out Jali- UPVC/ SWR Pipe fittings including Boxing of Nahany Trap in RCC Floor including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Somany, or equivalent
66
-
479.3
Supply and Fixing 15 mm nominal size Chromium plated finish brass over head shower arm of 450 mm long with 90 degree bend and wall flange suitable for rain shower and with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Somany or equivalent
2
-
1601.1
Supply and Fixing of 15 mm CP finish brass concealed stop valve of not less than 400 grams weight with adjustable wall flange and quarter turn spindle conforming to IS 8931 and with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Somany or equivalent
26
-
1030.8
Supply and Fixing of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Somany or equivalent
25
-
3351.9
Supplying and fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Nirali, Futura or equivalent
5
-
5715.6
Supply and fixing of CP surface mounted towel rod with 10 years warranty including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jacquar, Kohler, Toto, Bobrick, Euronics or equivalent
2
-
3401.9
Supply and Fixing of 15 mm brass forged body concealed diverter forged body with 3 way in let including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Jaquar, Toto or equivalent
2
-
4434.700000000001
Supply and fixing of PORTABLE EYEWASH STATIONS HS CODE: 73242900, Model No: EWW-05S, Stainless Steel Wall mounted Eye wash stations, minimum 255mm diameter,height of shower is 1020MM,Flow Rate of Eye Wash is 9 to 11 L/Min., the Eye Wash Nozzle is SS 304 with 10 inch waste water recycle bowl, Eye Wash Valve is 1/2 inch corrosion resistant 304 stainless steel ball valve anchored to wall as per standard specifications including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of workas directed by the Engineer-in-Charge. Make: Euronics or equivalent
10
-
9995.2
Supply and fixing of SURFACE-MOUNTED CONVERTIBLE PAPER TOWEL DISPENSER AND WASTE RECEPTACLE shall be Type-304 stainless steel with welded construction exposed surfaces shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be secured to cabinet with a full‑length stainless steel piano-hinge and equipped with a semi-concealed tumbler lock keyed like other Bobrick washroom accessories. Paper towel dispenser shall dispense 600 C-fold or 800 multifold paper towels. Removable waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L) including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of workas directed by the Engineer-in-Charge. Make:Bobrick or equivalent
12
-
58450.7
Supply and fixing of DISABLED GRAB BAR 32 Dia of length of 24"-Grab Bar shall be type-304 Stainless Steel with satin holes for attachment to wall including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Bobrick or equivalent
3
-
4086
Supply and fixing of surface mounted SS Hand dryer shall have one piece fire retardant moulded vama white colour cover mounting base and fan housing shall be fire retardant mould at total 1110volts ip 23 class 2.Dryer will turn automatically when hands are removed the sensor shall automatically shut drier of approximately 2min after drier turns off . After The electronic sensor shall automatically reset at itself on drier shall normally. width-285mm power consumption ,nise-75DB,the units shall have rohs WEEE marked units shall be disinfection and warranty of 3 year including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.Make: VAMA STREAM DRY UV SF ,SENSOR OPERATED or equivalent
12
-
24300.699999999997
Supply and Fixing of RO water purifier of 15LPH Capacity (Model: Kent Excell+), ABS/ Stainless steel, under the counter mounting, inlet water pressure of minimum 0.3 kg/cm2 and maximum of 3 kg/cm2 Sediment, carbon black filter filter catridges, storage capacity of minimum 7L, 60 W power consumtion. Installation to be done by authrized personnel as instructed by instructed by engineer in charge, Cost to include all the drain pipes and electrical conduits including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Kent, Aquaguard or equivalent
4
-
18128
Supply and Fixing of 8 mm HPL Urinal partition 500mm x 900mm with all the necessary SS D-Brackets, Installed as per the detailed drawing, including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Merino, Stylam or equivalent
12
-
3300
Supplying and fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain channel fixed in brick masonry white cement pointing including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
20
-
935.2
Supplying, laying, fixing and commissioning of PVC/SWR pipe - 4Kg/sq.cm (Rate adopted as per including Plain Bend, Door Bend of the following diameter including fixing necessary fittings like bends etc with solvent jointing as per standard practice with necessary clamps including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
75 MM dia
270
-
207.1
110 MM dia
160
-
301.6
Supply, fixing and testing approved make UPVC pipes class III 4Kg/cm2 with solvent cement joints confirming to IS 4985. The pipe shall be laid from wash basin to floor trap, kitchen sink to floor trap, urinal to urinal trap. The scope of supply includes all fittings, specials, strong solvent cement and all other items required to complete the installation.The scope of installation includes wall chasing, making holes in slab, walls, beams and making good the chased surfaces including necessary screws,nailsetc., complete as per specifications including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
32 mm dia. (Clear ID)
35
-
51.9
40 mm dia. (Clear ID)
30
-
168.4
Supplying, laying, fixing and commissioning the PVC/SWR pipes 110MM DIA including couplers/ bends, etc any diameter including fixing necessary fittings like bends, plugs, couplers, etc with solvent jointing as per standard practice for terrace rain water,.including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. 110 MM dia to take Rain Water Pipe for Rainfall (Downtake Pipe)
350
-
324.3
Supply, Fabrication and erection /fixing of using Structural steel work as per the appoved drawing using Mild steel sections and Structural Steel i.e Angles, Channels, I-Section of all sections fixing in the positon at required location including cost and conveyance of all materials like Structural Steel, including one coat of Red Oxide Paint including all incidental and operational charges for fabrication of structure like cutting, tying of rod fixing them in position, including hire charges for welding machine, electrodes, welding the bar to channel if required, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-charge. Supporting system for UPVC/PVC/SWR Pipelines wherever required.
100
-
92.6
Drilling with core cutting machine in RCC slab floor, etc., for laying pipes and rendering the same in slab floor, including hire charges,core cutting machine,power extra cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
Core Cutting in RCC Masonary
-
-
-
110MM Dia with 150MM Depth
150
-
330
150MM Dia with 150MM Depth
100
-
440
200MM Dia with 150MM Depth
75
-
495
Providing and fixing of approved make UPVC/SWR vent cowl with necessary accessories etc., complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
75 mm dia
6
-
27.3
110 mm dia
6
-
32.9
INTERNAL WATER SUPPLY SYSTEM
-
-
-
Supplying, laying, Fixing, joining, welding, fixing and commissioning the CPVC pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, clamps etc with welding the joint as per standard practice of Premium make CPVC Pipes of the following outer diameter including Chiseling the brick masonary walls with required width and depth,including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
15.90mm OD Pipe - SDR 13.5
80
-
211.79999999999998
22.20mm OD Pipe - SDR 13.5
250
-
232.29999999999998
28.60mm OD Pipe - SDR 13.5
70
-
285.70000000000005
34.0mm OD Pipe - SDR 13.5
75
-
365.20000000000005
41.30mm OD Pipe - SDR 13.5
75
-
450
Providing and fixing single acting air release valves with screwed inlet of the following dia as per I.S:12992 rated for 20kg/cm2 pressure (Gravity Down comer) including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
20mm AIR RELEASE VALVE
9
-
1395.8
25mm AIR RELEASE VALVE
9
-
1395.8
EXTERNAL WATER SUPPLY SYSTEM
-
-
-
Supplying, laying, joining, welding, fixing and commissioning of the following PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - below 40 mm dia including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
28.60mm OD Pipe - SDR 13.5
70
-
236.3
34.90mm OD Pipe - SDR 13.5
75
-
315.8
41.03mm OD Pipe - SDR 13.5
55
-
400.6
50mm x 4.6mm PN 10/PPR pipe
355
-
358.6
63mm x 4.6mm PN 10/PPR pipe
200
-
547.2
Supplying and fixing of the following Bronze Ball valve with SS Ball and SS Spindle as per IS-Class- I, Indian make heavy type of the following including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
-
-
-
20mm NB SIZE BRONZE BALL VALVE
12
-
356.8
25mm NB SIZE BRONZE BALL VALVE
32
-
518.5
32mm NB SIZE BRONZE BALL VALVE
10
-
857.1
40mm NB SIZE BRONZE BALL VALVE
4
-
1150.2
Manufacture, supply and delivery of DI (Ductile Iron) Wafer Butterfly valves conforming to IS 13095 (and its amendments) With hand lever below 150 mm, with Worm gear for 200 mm and above including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge .
-
-
-
50 mm dia - PN 16
5
-
6358.5
65 mm dia - PN 16
2
-
6879.8
Supplying and fixing of SS Sheet/Plate 304 grade as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels-SS Ladder
200
-
705
EXTERNAL SEWERAGE SYSTEM
-
-
-
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
4
-
7221.4
Supplying and Fixing Bronze Compact pressure reducing valve (Screwed) as per IS - Class -I, Indian make heavy type - 20 mm NB Size - For ground floor toilets including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
12
-
1865.8
Supplying, fixing and testing PVC/SWR pipe pipes conforming to IS 4985 - 6kg/sqcm with all fittings like shoes, bends fixed in the pipe shafts (ducts) ,floor, with suitable supports etc., complete. The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. discharged as spout into natural ground.as directed by the Engineer in-charge including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
75 MM dia
330
-
287.7
110 MM dia
40
-
435.8
160 MM dia
340
-
668.7
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, all taxes excluding GST ,curing etc.,complete for finished item of work as per Standard specification.
21
-
13352
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 914.4mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, all taxes excluding GST ,curing etc.,complete for finished item of work as per Standard specification.
5
-
8379.1
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
4
-
7221.4
Providing and laying non-pressure NP2 class ( light duty) R.C.C PLAIN ENDED PIPE jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, excluding seigniorage charges,all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
-
-
-
150 dia hume RCC pipe
15
-
578.1
300 dia hume RCC pipe
250
-
829.8
Supply, fixing and commissioning the PVC pipes OF 110MM DIA including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends,plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
80
-
307.1
Construction of Sub soil well(RAIN WATER HARVESTING PIT) with Brick Masonary Wall of 1200mm dia with a depth of 3000 mm with Plastering to Brick Masonary to a width of 0.23 on top and inside and outside of width 230mm height, including excavation, as directed by the site Engineer-in-charge etc.,complete.Rain Water Harvesting at different locations as per the approved drawing for depth of 30 mtrs Including a) Drilling bore hole of 150mm dia with rotary or reverse rotary process upto 30 meter depth complete to the satisfaction of Engineer-in-Charge.b) Lowering Upvc slotted pipe 160mm dia 6 Kg per Sq. Cm pressure complete with solvent cement joint and cap as per the satisfaction of Engineer-in-Charge. c) Providing and filling Sand/ washed gravels / pea gravels around Upvc pipe as per the requirement and satisfaction of Engineer-in-Charge.
10
-
45662.9
SEWAGE TREATMENT PLANT -30KLD
-
-
-
Supply, Installion, testing and commissioning of BAR SCREEN of size 500mm x 500mm, angle of inclination - 55 degree, clear spacing between bars is 15-20mm plant, inter unit piping with necessary flanges, bolts, nuts, neoprene gaskets, welding wherever necessary, with necessary control valves, non return valves, required core cut and sleeves In RCC wall etc and with one coat of primer and two coats of approved enamel paint etc., complete. including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.
1
-
18700
Supply, Installation, Testing and commissioning of RAW SEWAGE PUMP (Submersible type with 35-40mm particle handling capacity without cutter), Discharge Capacity is 5 Cum /Hr, Discharge Pressure is 1.0 Kg/Cm, Total Head is 10.00M of 1.00 HP Motor with Three Phase of approved make mounted on a common base frame as per technical specifications including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge.Make:CRI, Kirloskar or other equivalent
2
-
39490
Supply,Installation, Testing and commissioning of SLUDGE PUMP of Self Priming Type, Discharge is 0.5 Cum/hr, Total Head is 10M, Motor Rating is 1HP with three phase of approved make along with all accessories including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes but excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
2
-
20900
Supply,Installation, Testing and commissioning of FILTER FEED PUMP with Mono Block Type of Discharge is 1.5 Cum/hr,Discharge Pressure is 2.5-3.0 Kg/cm2,Total Head is 30 M, rating is 1 HP with three phase of approved make along with all accessories including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge. Make: Kirlosakar,CRI
2
-
27500
Supply,Installation, Testing and commissioning of SCREW PUMP of Screw, Discharge Capacity is 1.0 Cum/hr, Operating Pressure is 4.5-5.0 Kg/cm2, Rotor SS410HCP, Nitrile Stator of approved make along with all accessories including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
104500
Supply, Installation, Testing and commissioning of COARSE BUBBLE DIFFUSER with Tubular Type 80mm dia x 800 mm long long of uPVC pipe grid with necessary orifices uPVC pipe of 6.0 kg/sq cm pressure rating with removable deflector to provide clog-free oxygen for equilization tank and reactor tank.including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge Make: TECHPRO ,MM Aqua / SC / EQ
6
-
2431
Supply, Installation, Testing and commissioning of FINE BUBBLE DIFFUSER IN SBR with necessary piping and support grid of 90mm dia, 1m long with EPDM membrane. The support frame retained by two hose clamps fitted to pipe lateral by PVC TEE and spectrum saddle arrangement in each SBR tank & Treated water reuse tank., complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge Make: TECHPRO MM Aqua / SC / EQ
8
-
2431
Supply,Installation,Testing and commissioning of AIR BLOWERS WITH MOTORS of Twin Lobe Compressor Type, Discharge capacity is 60 Cum/Hour, Water Column is 5.0 MWC, Discharge Pressure is 0.50 Kg/Sqm ,Belt Driven Type, 3 Hp Three Phase with the accessories like Base Frames,Air Filter for Suction line and Silencer for Discharge, Safety Valve and Pressure Gauge, V-Belt and Guardas of approved make as directed by the Engineer-inCharge etc., complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge Make: USHA/ LEINTZ/KAY/ EVEREST/EQ
1
-
174900
Supply,Installation,Testing and Commissioning of PRESSURE SAND FILTER of Flow rate is 1.50Cum/Hr, Vertical Type of Cylindrical,FRP Vesse,Downflow Type, Size of Inlet/Outlet Pipe, (Frp tank size of Diameter is 16"and height of 65" on Straight), Pentair/Aventura Equivalent,Design Pressure is 5kg/Sqcm, Working Pressure is 2.5-3.5 Kg/Sqcm of various sizes of SAND and PEBBLES,UPVC with MPV frontal piping, including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
72050
Supply, Installation, Testing and commissioning of ACTIVATED CARBON FILTER with carbon media with the following specifications 1.Flow rate - 1.5cum/hr, 2.Type of Vessel - Vertical Cylindrical Vessel, 3.MOC of Vessel - FRP Vessel, 4.Type of flow-Down flow, 5.Size of Inlet/Outlet Pipe - 40NB, 6.Diameter-16", 7.Design pressure - 5 kg/sq.cm, 8.working pressure - 2.5 to 3.5 Kg/Sqcm, with suitable valve battery / Multiport valve of suitable dia having a filtration rate of 18 cum/sqm/hr with initial charge Iodine 800 grade GAC media, pressure gauge with isolation valves on inlet, outlet, air release valve, strainer for distribution, collection etc., complete including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
77550
Supply,Installation,Testing and Commissioning of CHLORINE DOSING SYSTEM FOR FLUSHING WATER of Electronic Diaphragm, PP MOC,0 to 6 LPH of 50 Litres Capacity of HDPE MOC etc., complete as per standard specification including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
21850.4
Providing and Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer of CAPCITY 5000 LITRES approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials, all incidental and operational charges, all labour charges, all taxes excluding GST etc complete for finished item of work as directed by the Engineer-in-Charge
1
-
40560.6
Supplying and fixing of SS Sheet/Plate 304 grade as per approved drawing as directed by Engineer in Charge, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels- SS Ladder
300
-
705
Supply, delivery and fixing of encapsulated plastic steps anywhere in Telangana, including cost and conveyance of all materials like Plastic Steps,Screws etc, loading, unloading and stacking at site, including all incidental and operational charges, Transportation ,labour charges, all taxes except GST etc, for complete as directed by Engineer In Charge for finished item of work for all floors and at all levels
250
-
211.3
INTERNAL ELECTRIFICATION
-
-
-
LOW VOLTAGE SWITCHGEAR :
-
-
-
Supply, installation, Testing and Commissioning of 3phase and Neutral 415V, 4 wire Free Standing, Floor mounted MV panel as mentioned below made out of 2mm thick CRCA sheet after seven tank process and Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A per Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switch gear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have at least two spare cubicles of the maximum outgoing MCCB rating. All MCCBs shall be provided with microprocessor based releases & with Neutral link. The fault level indicated in the Schedule are the minimum ratings All Switchgear shall have Rotary Handles.
-
-
-
Equipment Panel - Supply, Installation, testing and commissioning of equipment panel with Incoming : 800 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars :800 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings: 100 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -3 NOS. 125 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -2 NOS. 160Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. 200 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection 3 NOS. 315 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection 1 NOS. 63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection 2 NOS. Metering :i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets. iii) CTs800A/5A 15VA burden Class 1.0 Accuracy with 0-800A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Legrand/L&T/Siemens/ABB/C&S
1
-
354750
Metal & Machine shop panel-1: Supply, Installation, Testing and commissioning of panel with Incoming :200 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars :200 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings: 100 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.40 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. 63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. 16A SPN MCB - 10 Nos, 20A SPN MCB -3Nos, 16A TPN MCB - 7Nos,32A TPN MCB - 1Nos. Metering : i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs200A/5A 15VA burden Class 1.0 Accuracy with 0-200A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operationalcharges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Siemens/ABB/C&S
1
-
208450
Metal & Machine shop panel-2: Supply, Installation, Testing and commissioning of panel with Incoming: 315 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars : 315 A, 4P Aluminium Busbar Chamber for the entire length of the Panel. Outgoings:100 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. 63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -3 NOS,20A SPN MCB -2 Nos,16A TPN MCB - 4 Nos,32A TPN MCB - 5 Nos. i) Digital Load Manager with RS 485 port,ii) LED type Phase indication lamps with individual 4A 4P MCB control – 1sets.iii) CTs 315A/5A 15VA burden Class 1.0 Accuracy with 0-315A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
157080
Finish shop Panel :Supply, Installation, Testing and commissioning of panel with Incoming: 160 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :160 A, 4P Aluminium Busbar Chamber for the entire length of the Panel. Outgoings:40 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -4NOS. 16A SPN MCB -6 Nos,16A TPN MCB - 5Nos,20A TPN MCB - 1 Nos. i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets. iii) CTs160A/5A 15VA burden Class 1.0 Accuracy with 0-160A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Siemens/ABB/C&S
1
-
200750
Wood shop Panel: :Supply, Installation, Testing and commissioning of panel with Incoming :200 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars: 200 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:40 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -3 NO,16A SPN MCB -12 Nos,16A TPN MCB -1Nos,10A TPN MCB -3Nos,20A TPN MCB -1Nos,32A TPN MCB -1Nos i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 200A/5A 15VA burden Class 1.0 Accuracy with 0-200A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
196900
Pre-Compliance & Laser Panel : Supply, Installation, Testing and commissioning of panel with Incoming : 125 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars : 125 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1 NO.40 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1 NO.16A SPN MCB -4 Nos,20A SPN MCB -1 Nos,16A TPN MCB -1 Nos,32A TPN MCB -3 Nos i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets. iii) CTs 125A/5A 15VA burden Class 1.0 Accuracy with 0-125A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
181500
Welding Shop Panel: Supply, Installation, Testing and commissioning of panel with Incoming :63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :63 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:20A SPN MCB -5 Nos,32A TPN MCB -1 Nos i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 63A/5A 15VA burden Class 1.0 Accuracy with 0-63A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
115500
Kids Maker space: Supply, Installation, Testing and commissioning of panel with Incoming :125 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :125 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1 NO.20A SPN MCB -5 Nos,16A SPN MCB -1 Nos,32A TPN MCB -3 Nos,40A TPN MCB -1 Nos Metering: i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 4A MCB control – 1sets.iii) CTs 63A/5A 15VA burden Class 1.0 Accuracy with 0-63A Digital Ammeter with inbuilt selector switch - 1sets.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
137500
Lighting Panel: Supply, Installation, Testing and commissioning of panel with Incoming :125 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars : 125 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:32 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1 NO. 32A TPN MCB -8 Nos,63A TPN MCB -2 Nos Metering:i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 4A MCB control – 1sets.iii) CTs 125A/5A 15VA burden Class 1.0 Accuracy with 0-125A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Siemens/ABB/C&S
1
-
143000
Emergency Lighting Panel: Supply, Installation, Testing and commissioning of panel with Incoming :32 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars :32 A, 4P Aluminium Busbar Chamber for the entire length of the Panel. Outgoings:32A TPN MCB -4 Nos Metering :i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 4A MCB control – 1sets.iii) CTs 32A/5A 15VA burden Class 1.0 Accuracy with 0-32A Digital Ammeter with inbuilt selector switch - 1sets.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/Siemens/ABB/C&S
1
-
120780
Power Panel: Supply, Installation, Testing and commissioning of panel with Incoming : 125 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :125 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:63A TPN MCB -6Nos, 40A TPN MCB -1Nos Metering:i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 125A/5A 15VA burden Class 1.0 Accuracy with 0-125A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
119350
I/C UPS Panel : Supply, Installation, Testing and commissioning of panel with Incoming :160 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :160 A, 4P Aluminium Busbar Chamber for the entire length of the Panel. Outgoings: 63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -5 NO. Metering: i) 0 - 500V Digital Voltmeter with Selector switch – 1set ii) Digital Load Manager with RS 485 port iii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iv) CTs 160A/5A 15VA burden Class 1.0 Accuracy with 0-160A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S.
1
-
119020
Computer UPS Panel : Supply, Installation, Testing and commissioning of panel with Incoming : 63 Amps TP2N Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :63 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings: 40A 4P MCB -4 Nos,32A DP MCB -1 Nos Metering:i) 0 - 500V Digital Voltmeter with Selector switch – 1set ii) Digital Load Manager with RS 485 port iii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iv) CTs 63A/5A 15VA burden Class 1.0 Accuracy with 0-63A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
120780
Equipment UPS Panel : Supply, Installation, Testing and commissioning of panel with Incoming : 63 Amps TP2N Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars : 63 A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings: 40A 4P MCB -2 Nos,16A 4PMCB -3 Nos,10A 4P MCB -2 Nos,16A SPN MCB -1 Nos Metering: i) 0 - 500V Digital Voltmeter with Selector switch – 1set ii) Digital Load Manager with RS 485 port iii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iv) CTs 100A/5A 15VA burden Class 1.0 Accuracy with 0-100A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
127600
GF HVAC Panel : Supply, Installation, Testing and commissioning of panel with Incoming : 160 Amps 4P Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :160A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings: 63 Amps TPN Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -3 NO,16A TPN MCB with DOL Starter -5 Nos,6A TPN MCB with DOL Starter -6 Nos,10A TPN MCB with DOL Starter -2 Nos,20A TPN MCB with DOL Starter -1 Nos,32A TPN MCB with DOL Starter -1 Nos, 32A DP MCB -1 Nos Metering:i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 125A/5A 15VA burden Class 1.0 Accuracy with 0-125A Digital Ammeter with inbuilt selector switch - 1sets. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
131780
FF HVAC Panel: Supply, Installation, Testing and commissioning of panel with Incoming :63 Amps 4P Variable Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :63A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:6A TPN MCB with DOL Starter -13 Nos,10A TPN MCB with DOL Starter -1 Nos,20A TPN MCB with DOL Starter -1 Nos,32A TPN MCB-1 Nos Metering: i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 63A/5A 15VA burden Class 1.0 Accuracy with 0-63A Digital Ammeter with inbuilt selector switch - 1sets.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
244200
SF HVAC Panel: Supply, Installation, Testing and commissioning of panel with Incoming:40 Amps 4P Variable Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS.Busbars :40A, 4P Aluminium Busbar Chamber for the entire length of the Panel.Outgoings:6A TPN MCB with DOL Starter -8 Nos,25A TPN MCB with -1 No Metering:i) Digital Load Manager with RS 485 port ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets.iii) CTs 63A/5A 15VA burden Class 1.0 Accuracy with 0-63A Digital Ammeter with inbuilt selector switch - 1sets.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Siemens/ABB /C&S
1
-
192500
MCB DISTRIBUTION BOARDS (DB's) :
-
-
-
Supply, erection, testing and commissioning of 8 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, single door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 6-32A DP MCB as incommer and 6 nos. 6-32A 10KA SP MCB as outgoers. The cost including all incidental and operationalcharges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
1
-
5081
Supply, erection, testing and commissioning of 12 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 6-32A DP MCB as incommer and 10nos. 6-32A 10KA SP MCB as outgoers. The cost including all incidental and operationalcharges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
3
-
6360
Supply, erection, testing and commissioning of 6 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40-63A TP MCB as incommer and 3nos, 25-40A DP RCCB having sensitivity of 100mA and 18 nos. 6-32A 10KA SP MCB as outgoings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
10
-
12137
Supply, erection, testing and commissioning of 8 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40-63A TP MCB as incommer and 3nos, 25-40A DP RCCB having sensitivity of 100mA and 24 nos. 6-32A 10KA SP MCB as outgoers. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear makes: Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
3
-
13568
Supply, erection, testing and commissioning of 12 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40-63A TP MCB as incommer and 3nos, 25-40A DP RCCB having sensitivity of 100mA and 36 nos. 6-32A 10KA SP MCB as outgoers. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear makes: Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
5
-
19415
40KVA Online UPS
-
-
-
Supply, transport and installation of 40KVA / 312V DC on line UPS system IGBT based rectifier with input power factor correction 32 bit microprocessor based with isolation transformers double conversion, SNMP controls, LCD display, Pure sine wave out put, with auto static switch three phase input / Three phase output and modular structure for better thermal technology / cooling facility,with warranty up to three years.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-APC/Numeric/Emerson.
1
-
363795
Supply and providing of UPS cum battery rack upto 5 to 10 batteries.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
2840
Supply and providing of UPS cum battery rack upto 11 to 20 batteries.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
5226
Supply and fixing of 12V 65 AH SMF battery including wire leads to support necessary back up ~ 30 MIN on above UPS on 100% load. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make-Qaunta/Racket /Exide.
36
-
4545
30KVA Online UPS
-
-
-
Supply, transport and installation of 30KVA / 312V DC on line UPS system IGBT based rectifier with input power factor correction 32 bit microprocessor based with isolation transformers double conversion, SNMP controls, LCD display, Pure sine wave out put, with auto static switch three phase input / Three phase output and modular structure for better thermal technology / cooling facility,with warranty up to three years. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-APC/Numeric/Emerson.
3
-
301080
Supply and providing of UPS cum battery rack upto 5 to 10 batteriesThe cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
2840
Supply and providing of UPS cum battery rack upto 11 to 20 batteries.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
6
-
5226
Supply and fixing of 12V 42 AH SMF battery including wire leads to support necessary back up ~ 30 MIN on above UPS on 100% load. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Qaunta/Racket /Exide.
108
-
4545
10KVA Inverter
-
-
-
Supply and installation of 10 KVA, 180/192VDC true on line UPS system IGBT technology pure sine wave out put,double conversion with auto and manual static by pass switch single phase input / Single phase output. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Powerone/ Numeric / Emerson.
1
-
105776
Supply and providing of UPS cum battery rack upto 11 to 20 batteries. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
5226
Supply and fixing of 12V 26 AH SMF battery including wire leads to support necessary back up ~ 30 MIN on above UPS on 100% load. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Qaunta/Racket /Exide.
36
-
3863
MCCB WITH ENCLOSURE
-
-
-
Supply, erection, testing and commissioning of following powder coated 1.6mm CRCA sheet steel enclosure, IP 43 protection as per IS :13032 including following rating and breaking capacity TPN MCCB with thermomagnetic release and terminal spreaders as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes :Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora/HPL)
-
-
-
63A, 16 KA,TPN MCCB enclosed in 1.6mm thick,CRCA sheet steel box.
4
-
13398
100 A, 16 KA,TPMCCB in 1.6mm thick,CRCA sheet steel box.
3
-
13398
200 A, 16 KA,TPMCCB in 1.6mm thick,CRCA sheet steel box.
1
-
20375
MV CABLE SYSTEM
-
-
-
MV POWER & CONTROL CABLES:
-
-
-
Supply,Laying of cables on cable trays, through pendants, on structural supports or clamping on wall / ceiling, include unloading,shifting upto site.The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S. strip 3 mm thick, supply of all clamping materials and hardware etc., providing cable tags made out of aluminium strip and 75x20 mm in size with cable number and size punched on it. Cable tags shall be tied to cables at every 20 meter interval and at both the ends.
-
-
-
Supply of 2.5 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
50
-
207
Supply of 4 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
1710
-
222
Supply of 4 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
3560
-
276
Supply of 6 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
125
-
298
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
777
-
380
Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges,cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
1454
-
600
Supply of 16 Sqmm 1 Core PVC insulated, 1100V grade unarmoured copper flexible cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
727
-
216
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
315
-
252
Supply of 35 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
81
-
298
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
154
-
387
Supply of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
101
-
494
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
47
-
639
Supply of 120 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
57
-
778
Supply of 400 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I). The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Unicab / Polycab / Havells /Gloster / KEI.
48
-
2079
MV CABLE END TERMINATION
-
-
-
Cable end termination of following XLPE armoured cables including supply of single compression type brass-nickel material Gland, long barrel type copper lugs & pvc hood etc,
-
-
-
Supply of Single compression brass cable glands for 4 core XLPE copper armoured cable from 2.5 Sq.mm with brass washers , Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
4
-
253
Supply of Single compression brass cable glands for 3 core XLPE armoured copper cable from 4 Sq.mm with brass washers , Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
82
-
229
Supply of Single compression brass cable glands for 4 core XLPE armoured copper cable from 4 Sq.mm with brass washers , Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
84
-
253
Supply of Single compression brass cable glands for 3 core XLPE armoured copper cable from 6 Sq.mm with brass washers , Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
10
-
229
Supply of Single compression brass cable glands for 4 core XLPE armoured copper cable from 6 Sq.mm with brass washers , Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
52
-
253
Supply of Single compression brass cable glands for 4 core XLPE armoured copper cable from 10 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
46
-
253
1C x 16Sq.mm copper flexible cable The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
82
-
154
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 25 Sq.mm with brass washers, Lugs complete The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
28
-
266
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 35 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
4
-
280
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 50 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
4
-
295
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 70 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
10
-
400
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 95 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
2
-
405
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 120 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
2
-
612
Supply of Single compression brass cable glands for 3.5 core XLPE armoured aluminum cable from 400 Sq.mm with brass washers, Lugs complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Jainson/Dowells/SMI
4
-
1722
EARTHING
-
-
-
CHEMICAL EARTHING
-
-
-
Excavation with 150mm dia 3 Mtrs depth of earth pit in all type of soils with Providing Galvanised earth electrode rod of inner dia 38mm dia and outer dia 76mm, 3mtr long with clamps and 2 bags of back fill compound etc complete with construction of brick masonary of size 450mm x 450mm chamber with cover for maintenance free earthing.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
12
-
6337
Excavation with 150mm dia 3 Mtrs depth of earth pit in all type of soils with Providing Copper earth electrode rod of inner dia 26mm dia and outer dia 51mm, 3mtr long with clamps and 2 bags of back fill compound etc complete with construction of brick masonary of size 450mm x 450mm chamber with cover for maintenance free earthing.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
8867
EARTH STRIPS
-
-
-
Supply and laying earth strips 0.3M below ground/ exposed including connections by bolting with double washer, nut & bolt: The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
40 x 6mm GI flat
15
-
162
25 x 6mm GI flat
160
-
112
25 x 3mm GI flat
180
-
68
40 X 6mm Cu flat
15
-
1552
25 X 6mm Cu flat
85
-
1042
25 X 3mm Cu flat
120
-
533
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
430
-
27
Providing and laying 1C x 70 Sqmm Copper conductor green earth wire on surface or in recess for loop earthing as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Polycab/KEI/Havells
45
-
699
LADDER TYPE CABLE TRAY
-
-
-
Supply,Installation of prefabricated hot deep galvanised ( 460 gms per sq. met.), ladder type cable trays of minimum 1.6/2 mm thick . Prefabricated, bends and couplers with G.I. Nuts and bolts. Gas cutting of cable trays at site is not permitted. If any welding is to be done on cable trays, the welded part shall be touched up with anti-corrosive primer and silver paint. The running rate shall include bends and couplers. Cable tray supports shall be paid extra.
-
-
-
Supply and Installation of 150mm x 50mm x 2 mm thick GI Ladder
type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
130
-
477
Supply and Installation of 300mm x 50mm x 2 mm thick GI Ladder
type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
282
-
596
Supply and Installation of 450mm x 50mm x 2 mm thick GI Ladder
type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
194
-
909
Supply and Installation of 750mm x 50mm x 2 mm thick GI Ladder
type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
157
-
1085
Supply and Installation of 900mm x 50mm x 2 mm thick GI Ladder
type cable tray along with required coupler plates, Anchor bolts and nuts including required welding for joints etc complete and the tray should be fitted on the wall / Ceiling etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
118
-
1204
PERFORATED CABLE TRAY
-
-
-
Supply,Installation of prefabricated Perforated type cable trays of minimum 1.6/2 mm thick as per details given in Drawing. Prefabricated, bends and couplers with G.I. Nuts and bolts. Gas cutting of cable trays at site is not permitted. If any welding is to be done on cable trays, the welded part shall be touched up with anti-corrosive primer and silver paint. The running rate shall include bends and couplers. Cable tray supports shall be paid extra.
-
-
-
Supply and Installation of 150mm x 50mm x 1.6 mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
369
Supply and Installation of 300mm x 50mm x 1.6 mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
682
MAINS & CIRCUIT WIRING
-
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
-
-
-
Supply and laying of 3 runs of 36/0.3mm (2.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (For Power Sockets Wiring)Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard.
3300
-
111
Supply and laying of 3 runs of 56/0.3mm (4.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (For Power Sockets Wiring)Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard.
2350
-
155
POINT WIRING
-
-
-
Wiring with three runs of 1.5 Sqm FRLS PVC insulated flexbile copper conductor cable as Phase ,neutral and earthing in the existing PVC conduct pipe with 6A modular type switch with PVC module front plate and including all labour charges etc., complete for light point, call bell point and exhaust fan points etc complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes of wire: Finolex/ RR kabel / Havells / KEI Makes of Madular switch & Socket:Legrand Arteor/Schneider Zen celo/Honeywell Blengeplus
-
-
-
a)1 LP Controlled 1 Switch
69
-
865
b)2 LP Controlled 1 Switch
84
-
968
c)3 LP Controlled 1 Switch
35
-
1071
d)4 LP Controlled 1 Switch
32
-
1174
e)5 LP Controlled 1 Switch
13
-
1277
f)6 LP Controlled 1 Switch
28
-
1379
g)7 LP Controlled 1 Switch
22
-
1482
h)8 LP Controlled 1 Switch
10
-
1585
i)9 LP Controlled 1 Switch
7
-
1688
j)10 LP Controlled 1 Switch
9
-
1791
k)11 LP Controlled 1 Switch
1
-
1894
l)12 LP Controlled 1 Switch
8
-
1997
SWITCHES & SOCKETS
-
-
-
Supply and erection for approved make 1No 2/3pin 6A modular universal socket with 6A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete for Raw Power Points.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
126
-
676
Supply and erection for approved make 2Nos 6A 2 /3 Pin 2 Module Modular Universal Socket with 1 No.6A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete for UPS Points.The cost including all incidental and operational charges, labour charges,cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
44
-
1115
Supply and erection for approved make 1Nos 6/16A 3 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
122
-
824
Supplying and fixing 10 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 10 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand / Schneider / Honeywell.
7
-
4625
Supplying and fixing 16 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 16 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand /Schneider / Honeywell .
9
-
4625
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand/ Schneider/ Honeywell.
8
-
4625
Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. c.
4
-
5268
Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 63 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand / Schneider / Honeywell
2
-
5864
Supplying and fixing 6A, 240 V, Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith16 A "C" curve, DPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out
let and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
3
-
2534
Supplying and fixing 16A, 240 V, Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 16 A "C" curve, DPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out
let and complete with connections, testing and commissioning etc. as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.
26
-
2666
Supply and fixing of Remote start/stop push button with all accessories complete as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Technic/Vasihno/Schneider
29
-
430
PVC CONDUIT
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:Sudhakar/Finolex/Modi
-
-
-
20mm
2500
-
59
25mm
750
-
68
32mm
100
-
86
RACEWAYS
-
-
-
Supply and Installation of following size G I Raceways of 2mm thick with top
cover and required hard ware etc suspended from the ceiling or Along the wall or in trench, in floor or on floor,The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
100mm x 40mm
175
-
523
150mm x 40mm
150
-
688
300mm x 40mm
250
-
1171
JUNCTION BOXES
-
-
-
150mm x 50mm
22
-
373
200mm x 50mm
23
-
468
350mm x 50mm
24
-
892
LIGHT FITTINGS
-
-
-
Supply, fixing and testing of 38W(2'x2') LED recessed mounted slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department,CRI 80, and THD is less than 15% etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge LUMINAIRE MAKE : Wipro /Crompton / Bajaj / Havells /HPL / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
20
-
2825
Supply, fixing and testing of 11.5W LED recessed mounted down light fitting Philips cat.no DN 395B LED20S-4000 PSU WH PB (or) equivalent with all accessories as complete as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge LUMINAIRE MAKE : Wipro /Crompton / Bajaj / Havells /HPL / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
154
-
2495
Supply and fixing of 12W LED Flex Accent Truck light fitting philips cat.no: ST391T LED10/930 PSU-E NB 1C WH IN (or) equivalent with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
29
-
4475
Supply and fixing of 28W LED tube suspended light fitting philips cat.no:BN 108C LED 20S PSU CDL WH + AC108C MB S with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
1670
Supply and fixing of 18W LED cylindrical type suspended light fitting with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
2011
Supply and fixing of 15W LED cylindrical type suspended light fitting with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5
-
1747
Supply and fixing of LED Highbay symmetric beam luminaire with housing made of die-cast aluminium of system wattage 118W suspended light fitting philips cat.no: BY415P LED145S CW WB FG PSU GR (or)equivalent with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
13825
Supply and fixing of 46W LED suspended light fitting philips cat.no: SP780 X LED22S-4000 PSU W6L112 OD SI" + ZPH780 N1500 (or)equivalent with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
6785
Supply and fixing of 8' - 64W LED optimus trunk light fitting philips cat.no: LL199X 1XDLED40-6500 PSE OD WH (or)equivalent with all accessories as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
4035
Supply and fixing of 4' - 32W LED optimus trunk light fitting philips cat.no: LL199X 1XDLED40-6500 PSE OD WH (or)equivalent with all accessories as complete.The luminaire shall be with Co-extruded polycarbonate housing and mounded end caps.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
4035
Telephone, Data & TV Works
-
-
-
Telephone System
-
-
-
Supply and Fixing of Modular socket type Telephone jack with Connector.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge
Plus / Cabtree Amare / Logus Platina.Krone)
49
-
324
Supply and laying of 2 Pair, 0.5mm telephone copper cable in the existing pipe including all labour charges etc.,The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
Makes : Finolex / Delton / Surabi / Polycab
-
-
27
Supply & installation of 10 Pair Telephone distribution box with back mount
frame, krone connector, powder coated metal body with lock and key
arrangement.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
738
Supply & installation of 20 Pair Telephone distribution box with back mount
frame, krone connector, powder coated metal body with lock and key
arrangement.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1079
Supply & installation of 50 Pair Telephone distribution box with back mount
frame, krone connector, powder coated metal body with lock and key
arrangement.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
2181
Supply and laying of 10 Pair, telephone copper cable in the existing pipe including all labour charges etc.,The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
Makes : Finolex / Delton / Surabi / Polycab
35
-
64
Supply and laying of 20 Pair, telephone copper cable in the existing pipe including all labour charges etc.,The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Finolex / Delton / Surabi / Polycab
40
-
103
Supply and laying of 50 Pair, telephone copper cable in the existing pipe including all labour charges etc.,The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes : Finolex / Delton / Surabi / Polycab
15
-
222
TV System
-
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes: Finolex / Delton / Surabi / Polycab
-
-
28
Supplying and fixing modular co-axial socket type TV antenna outlet with GI box, modular base & cover plate in recess etc. including connections as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.
15
-
321
Supply and fixing of 4 way TV Splitter with all accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
883
LAN System
-
-
-
Supply and Fixing of approved make of plug - in type LAN RJ-45 socket outlet with G.I outlet box and cover plate complete as required in 3 module plate including cost and conveyance of all materials and labour charges commissioning of CAT 6 including testing and giving report to each point etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / Legrand AMP / Krone)
100
-
563
Supply and laying of Cat 6 LAN cable in the existing PVC conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / AMP / Molex)
2500
-
26
Supply & installation of 24port Network switch, 3mtr-Patch cord & 7mtr patchcord, 24 port patchpanel, 6U rack with power manager and all necessory accessories as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : CISCO / Net Gear / HP / D
3
-
18470
Supplying and Laying of 12 core Single mode outdoor OFC cable with all necessary fitting etc to complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : D Link / AMP / Molex / Legrand / Krone.
85
-
167
MISCELLANEOUS ITEMS
-
-
-
Supply and laying of 200MM NP2 Class Hume Pipe with collars including labur charges for laying of Hume Pipe including excavation etc complete as per the requirement of site conditions.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
761
450mm (L) x 450mm (W) x 1200mm (D) Inspection Chamber with pre cast Cover. Quoted rate shall include necessary excavation, back filling and cementing of joints.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
18536
450mm (L) x 450mm (W) x 1350mm (D) Inspection Chamber with pre cast Cover. Quoted rate shall include necessary excavation, back filling and cementing of joints as complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
18866
SAFETY ITEMS
-
-
-
Supply and fixing of Sand buckets with stand (set of 3 buckets).The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1282
Supply and fixing caution boards (433V) of std. Size.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
302
Supply and fixing of 415V Rubber mat at panel room 6mm thk. 1mtr. Wide.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
908
Supply and fixing of Shock treatment chart in wooden board with glass as per electricity board.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
579
Supply and fixig of First aid box with standard items.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1300
Supply of 1.1KV rating rubber hand gloves.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
288
Supply and fixing of LT cable route marker.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
158
HVAC
-
-
-
Chilled water type CASSETTE unit with inbuilt drain pump temperature sensor with Remote Controller.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
600 cfm, 1.5 TR Unit
17
-
61679
800 cfm, 2.0 TR Unit
1
-
62772
1000 cfm, 2.5 TR Unit
1
-
72613
Cabinet type Double skin (25 mm insulation) AHU / CSU complete with pre filter, chilled water cooling coil, Forward curved fan, EFF-1 motor and drive package for fan, canvas at unit outlet, outlet damper, vibration isolators, Limit switch, Wiring to the interlock of the AHU inspection door, marine light and motorised valve to be included. All the CSU's should be as per the details furnished in equipment schedule.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Ground floor
-
-
-
8 TR, 3400 CFM, 40mm of w.c TSP, 4 rows deep - prototype spacing.
2
-
147238
27 TR, 11500 CFM, 40mm of w.c TSP, 6 rows deep - seating space 1.
1
-
411197
25 TR, 18500 CFM, 40mm of w.c TSP, 6 rows deep - seating space 2.
1
-
687184
15 TR, 5300 CFM, 40mm of w.c TSP, 6 rows deep - café shop.
1
-
217850
First floor
-
-
-
8 TR, 3400 CFM, 30mm of w.c TSP, 6 rows deep - electronics
1
-
139442
5 TR, 2000 CFM, 30mm of w.c TSP, 6 rows deep - admin & store
1
-
95783
7 TR, 2700 CFM, 30mm of w.c TSP, 6 rows deep - library
1
-
125409
6 TR, 2400 CFM, 30mm of w.c TSP, 6 rows deep - retail & store
1
-
108257
14 TR, 5800 CFM, 40mm of w.c TSP, 6 rows deep - GE first build
2
-
239679
30 TR, 10000 CFM, 50mm of w.c TSP, 6 rows deep - seating space-1 & 2
1
-
374889
Second floor
-
-
-
17 TR, 5300 CFM, CSU, 30mm of w.c TSP, 6 rows deep - lecture hall
1
-
197134
7 TR, 2800 CFM, CSU, 30mm of w.c TSP, 6 rows deep - library
1
-
126968
6 TR, 2100 CFM, CSU, 30mm of w.c TSP, 6 rows deep - training
1
-
97342
6 TR, 2200 CFM, CSU, 30mm of w.c TSP, 6 rows deep - 3D printing
1
-
102020
40 TR, 14000 CFM, AHU, 50mm of w.c TSP, 6 rows deep - Pantry & seating area
1
-
519899
DX Inverter based Hi wall units- 3 Star Rated, R410A / R407C Referigerant
-
-
-
The out door unit shall consist of condenser coil, propeller fan with IP55 motor, Inverter Compressor, HP/LP switch all housed in a powder coated casing. The unit shall be provided with Expansion valve,liquid line strainer,catchall drier,thermostat etc, The fan shall be selected for low noise and shall be provided with fan guard. The unit shall be ceiling suspended in balcony as shown in the drawing.
-
-
-
The indoor unit shall comprise of cooling coil, evaporator blower, Voltage Stabalizer, Remote Control and cleanable filter all housed in a powder coated sheet metal cabinet of robust construction. Required quantities of Refrigerant gas and oil shall be included. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
2.0 TR / 600 CFM for UPS & server room & BMS Room
5
-
74375
Copper Refrigerant piping with 20G SD Copper pipes, (Hot gas line insulated with specified thickness nitrile rubber tubings and joints sealed with black cotton tape within the AC premises).The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
1/2 " dia (12.7 MM) with 13 mm insulation
100
-
517
7/8 " dia (22.4 MM) with 19 mm insulation
100
-
887
Cabinet type Double skin Treated Fresh Air ceiling suspended unit (25 mm insulation) complete with pre filter, 8 row chilled cooling coil, Forward curved fan, EFF-1 motor and drive package for fan, canvas at unit outlet, outlet damper, vibration isolators, Limit switch, Wiring to the interlock of the AHU inspection door, marine light and motorised valve to be included. All the CSU's should be as per the details furnished in equipment schedule.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Ground floor
-
-
-
40 TR, 9000 50mm of w.c TSP, 8 rows deep - Celing suspended type for machine shop
2
-
330116
15 TR, 2400 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for PCB shop
1
-
117612
20 TR, 3400 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for finish shop
1
-
153475
4 TR, 1200 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for plastics
1
-
80190
30 TR, 5100 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for Wood shop & kids maker space
2
-
208049
First floor
-
-
-
15 TR, 5000 CFM, 40mm of w.c TSP, 8 rows deep - Celing suspended type for pre compliance
1
-
204930
4 TR, 1200 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for pottery
1
-
80190
8 TR, 1500 CFM, 30mm of w.c TSP, 8 rows deep - Celing suspended type for LASER engraving
1
-
94224
Exhaust Air Fan section
-
-
-
S.I.T.C of Floor mounted Cabinet type centrifugal DIDW fan used for ducted exhaust application. The fans shall be with Forward curved, double skin single skin casing with 25 mm insulation, drive motor, drive package etc and shall be selected for low outlet velocity of 8.5 m/s.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Ground floor
-
-
-
6700 cfm at 25 mm static - Machine shop
2
-
137883
1700 cfm at 25 mm static - PCB shop
1
-
61034
2600 cfm at 25 mm static - Finish shop
1
-
75513
500 cfm at 25 mm static - Plastic & composits
1
-
51678
4000 cfm at 25 mm static - Kitchen (Air path should be seperated from the motor)
1
-
87541
4700 cfm at 25 mm static - Wood shop & kids makers
1
-
92219
First floor
-
-
-
1200 cfm at 25 mm static - Pottery
1
-
61479
1850 cfm at 25 mm static - Pre compliance
1
-
61034
800 cfm at 25 mm static - LASER engraving
1
-
51678
2000 cfm at 25 mm static - Toilet
1
-
67716
Second floor
-
-
-
900 cfm at 25 mm static - Toilet
1
-
51678
Supply, Installation of Electrostatic SCRUBBER for Exhaust System as per standards & specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
4000 cfm - kitchen in ground floor
1
-
224829
Ducted Inline Type fans :
-
-
-
Supply,installation,testing and commissioning of ducted inline type exhaust fans complete with motor, fan ,exhaust Louvers as per drawings and specifications of following sizes for Toilet Exhaust:The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
600 cfm at 20 mm static
2
-
17634
300 cfm at 20 mm static
2
-
11944
S.I.T.C of Cabinet type centrifugal DIDW fan used for ducted fresh air application. The fans shall be with Forward curved, double skin single skin casing with 25 mm insulation, drive motor, drive package & filter, etc and shall be selected for low outlet velocity of 8.5 m/s.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
3600 cfm at 25 mm static - kitchen in ground floor
1
-
69867
Chilled Water Piping :
-
-
-
Supply,installation,testing and commissioning of "C"class mild steel Chilled water piping with all necessary fittings like flanges supports,bends, tees,reducers,sockets & 19mm thick elastomeric nitrile rubber foam insulation & 28 guage Al.cladding as per the thickness and densities as mentioned in the drawings and as per specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
200 mm dia.
40
-
6861
150 mm dia
40
-
4917
125 mm dia.
40
-
4015
100 mm dia.
140
-
3280
80 mm dia
236
-
2652
65 mm dia
140
-
2191
40 mm dia.
106
-
1382
32 mm dia.
154
-
1183
25 mm dia.
200
-
979
Chilled Water Circuit Valves :
-
-
-
Supply,installation,testing and commissioning of following type of valves as per drawings and specifications for the chilled/hot water circuit with all fittings and insulations and 28 guage Al.cladding.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Butterfly Valves
-
-
-
100 mm dia.
2
-
6537
80 mm dia.
8
-
5133
65 mm dia.
8
-
4692
50 mm dia.
16
-
3967
40 mm dia.
20
-
4156
Balancing Valves
-
-
-
80 mm dia.
2
-
15529
65 mm dia.
2
-
13768
50 mm dia.
4
-
10504
40 mm dia.
5
-
7607
Y-Strainers
-
-
-
80 mm dia.
2
-
8529
65 mm dia.
2
-
7055
50 mm dia.
4
-
6125
40 mm dia.
5
-
4593
Supply,installation,testing and commissioning of following Thermometers and pressure guage as per drawings and specifications for the condenser water circuit complete with syphon and fitttings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
Pressure guage
58
-
2146
Thermometer
58
-
1927
Ball Valve
-
-
-
32 mm dia.
16
-
3146
25 mm dia.
46
-
2069
Ball Valve with strainer
-
-
-
32 mm dia.
8
-
4028
25 mm dia.
23
-
2610
Air Vent
29
-
1921
2-Way Motorised Valves :
-
-
-
Supply,installation,testing and commissioning of following Globe type UL/CE Approved 2-way motorised valves for AHUs with status feedback for the chilled water circuit with actuators, linkage, control wiring and all fittings and insulation and 28 Guage Al.cladding as per drawings and specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
65 mm dia.
2
-
26975
50 mm dia.
2
-
23385
40 mm dia.
4
-
19155
32 mm dia.
5
-
19150
25 mm dia.
8
-
16267
20 mm dia.
23
-
15333
Drain Piping :
-
-
-
Supply,installation,testing and commissioning of "B" class GI drain piping complete with fitting etc & nitrile foam insulation with sealing tapes & 28 G Aluminium cladding complete as per drawings & specifications of below sizes.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
32 mm dia.
150
-
1306
25 mm dia.
150
-
1085
Supply,installation,testing and commissioning of Air Vents 15 mm dia.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
29
-
1430
Supply,installation,testing and commissioning of 1" dia Ball valves for drain with fittings etc.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
29
-
2069
LOW SIDE WORKS
-
-
-
CNC machine fabricated sheet metal ducting as per IS standards & completely assembled in to box shape from factory complete with TDF / TDC flanges, duct damper, vanes, splitters, neoprone or equivalent approved gasket. suspension arrangement using threaded rods, slotted angle supports, anchor fastners etc. Connection to fans shall be provided with Canvas connections. Price should also include duct pressure test which has to be carried out for 20 % of total duct qty. All ducts inlet and outlet to be cleanly covered with polythene sheet in order to prevent dust entry to inside surface of ducts.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Rolastar / Vedha / Zeco / Alpha Duct / Radiant / Western air ducts
-
-
-
24G , Duct Width 0 - 750 mm
450
-
942
CNC machine fabricated oval elliptical sheet metal ducting as per IS standards of class VIII, 120 GSM zinc coating, pressure rating of 250pa. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: GP Sprial / Spiral Tubes / Dev Duct
-
-
-
24G , Duct Width 0 - 600 mm
1990
-
1155
22G , Duct Width 601 - 1200 mm
1877
-
1405
20G , Duct Width 1201 - 1750 mm
1077
-
1654
Transformation pieces from rectangular duct to eliptical duct made out of 24 G sheets.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: GP Sprial / Spiral Tubes / Dev Duct
50
-
814
Spray painting for ducts with one coat of red oxide primer and two coats of enamel with architects approved colour.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4944
-
349
Factory fabricated double skin plenum of 25mm thick PUF panels of density 40 kg/cum, casing inside & outside material - GI & casing inside & outside thickness - 0.6 mm . The area indicated is the surface area of the plenum.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
627
-
3075
Accoustic Insulation of ducting with 15mm thick open cell nitrile rubber insulation of class-1 accoustic 140-180 Kg / M3 density stuck to the clean internal surface of the duct with good quality low VOC content adhesive of Pidlite industries or equivalent.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
680
-
1334
Thermal insulation of ducting with 9/10 mm thick, 40-60 Kg / M3 density, class 'O' rated nitrile rubber faced with Aluminum foil 80 µ thickness,stuck to the cleaned external duct surface with synthetic rubber low VOC content ahdhesive of Pidlite industries or equivalent and to be used for tail end insulation of ducting.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5946
-
480
Diffusers/Louvers/VCDs/FDs :
-
-
-
Hi Flow jet diffusers of eye ball type made of powder coated aluminium finish, spout fully reversible rotating through 180 deg and suitable for duct mounting. The rate should be inclusive of Aluminium twin flap damper for each diffuser.The cost including all incidental and operational charges, labour charges,cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
315mm dia
96
-
4653
Supply,installation,testing and commissioning of Supply air Diffusers with dampers in extruded Aluminium construction and powder coated finish as per specifications and drawings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
300 mm dia
312
-
2463
Supply,installation,testing and commissioning of Return/Exht air Diffusers without dampers in extruded Aluminium construction and powder coated finish as per specifications and drawings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
300 mm dia
80
-
1839
Supply,installation,testing and commissioning of MS powder coated Inline Louvers without dampers but with wire mesh jali for exhaust.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5
-
6679
Supply,installation,testing and commissioning of GI construction Volume control Dampers lever operated type as per specifications and drawings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
35
-
7901
Supply,installation,testing and commissioning of GI construction Fusible Link Fire Dampers as per specifications and drawings.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
13968
Extruded Aluminum powder coated continuous grill with end flanges.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
6081
Opposed blade collar dampers of powder coated Aluminium.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
4861
Disc valve consisting of frame and disc made of high quality GSS with powder coating and disc attached to the frame by threaded rod. Foam gasket should be sealed around the back of the frame to avoid any air leakage. Also 1mtr of flexible duct of 150mm dia has to be included. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
150 mm dia
57
-
949
Non Vision grills for the toilet doors. The grills shall be supplied in two matching halves and shall match the door thickness. The grills shall be powder coated .The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
9259
ROOFTOP EXTRACT FAN
-
-
-
Supply, testing and installation of centrifugal rooftop fans for vertical or horizontal mounting, with circular connector for extraction from digester and ventilation of locker rooms in the gymnasium, the fans shall be supplied with appropriate elements for installation.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
6600
Supply,installation of SS fabricated Bird Screen for as per the drawings and specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
25
-
1080
FIRE
-
-
-
Hydrant & Sprinkler System
-
-
-
Providing , laying, testing & Commissioning of 25mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2500
-
318
Providing , laying, testing & Commissioning of 32 mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
600
-
425
Providing , laying, testing & Commissioning of 40mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
600
-
544
Providing , laying, testing & Commissioning of 50mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
700
-
637
Providing , laying, testing & Commissioning of 65mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
795
Providing , laying, testing & Commissioning of 80mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
1060
Providing , laying, testing & Commissioning of 100mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
1607
Providing , laying, testing & Commissioning of 150mm dia C class MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
350
-
2546
Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1000
-
69
Supply, fixing, testing and commissioning of 15mm size pendent type sprinklers of rating 68ºC. pendent /quartzoid bulb type sprinklers of rating 68ºC. pendent / side wall with required accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
940
-
495
Supply, fixing, testing and commissioning of 15mm size upright type sprinklers of rating 68ºC. pendent /quartzoid bulb type sprinklers of rating 68ºC. pendent / side wall with required accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
40
-
257
Supply, fixing, testing and commissioning of 15mm size pendent type sprinklers of rating 141ºC. pendent /quartzoid bulb type sprinklers of rating 68ºC. pendent / side wall with required accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
18
-
427
Supply, fixing, testing and commissioning of UL approved flexible dropper of 1.5 Mtrs length with required accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
40
-
1212
Fire Extinguishers
-
-
-
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make CeaseFire/Minimax
8
-
11008
Providing ,fixing , testing and commissioning of Portable AFFF Foam Type fire extinguisher 9 Lt Capacity, Stored Pressure Type with Pressure Gauge, hose and brackets etc .The discharge Range shall be minimum of 6 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating .The thickness shall not less than 2mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5
-
2771
Supply and fixing of ABC Powder MAP 4 Kg Fire extinguisher Mono ammonium phosphate power 90, stored pressure type, IS 15683 : 2006, pressure gauge gross wt. 6.9 kg, mpty wt.2.9 kg, can Ht.440mm, Diameter 140mm,Discharge time less than 13 sec, controllable dischargemechanism, range min. 4 mts applicable on classes A,B, C& electrically started fires, A- rating 3A, B-rating 34B, canconstruction: Deep drawn Co2 mig welding, wall construction: Forging & Machining, internal coating of can:construction: Forging & Machining, internal coating of can:Epoxy power coating, External coating of Can:Epoxypolyster powder coating, sheet metal thickness:1.60mm,Helium leakage detection tested, ISI & CE approved with 5years warranty (Cease Fire / Minimax make) Including transportation, all taxes and all labour charges etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
65
-
6434
Providing ,fixing , testing and commissioning of Portable Water type Fire Extinguisher 9 Lt Capacity, Stored Pressure Type, Pressure Gauge and mounting bracket etc.The discharge Range shall be minimum of 6 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating .The thickness shall not less than 2mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
2307
Supply and fixing of 4Nos of 9 Ltrs capacity round bottom bucket with sand, duly painted with enamel white inside & red out side and letter FIRE with black colour.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
20
-
1212
Supply anmd fixing of Fire bucket stand fabricated by M.S. angles to install for two numbers of buckets as per local fire officers standards.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
1010
Providing ,fixing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. A sign shall read “IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE”. The lettering shall be at least 12.5 mm block letters in red and white background. Such lettering shall be properly spaced to provide good legibility. The sign shall be at least 250 mm x 300 mm, where the diagram is also incorporated in it and 62.5 mm x 250 mm where the diagram is omitted. In the latter case, the diagram sign shall be at least 200 mm x 300 mm. The sign shall be located directly above a call-button and squarely attached to the wall or partition. The top of the sign shall not be above 2 m from the floor level.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
745
Fire exit signage at Each stairway and each elevator back shall be identified by an alphabetical letter. A sign indicating the letter of identification shall be posted and maintained at each elevator landing and on the side of the stairway door from which egress is to be made.The lettering on the sign shall be at least 75 mm high, of bold type and of contrasting colour from the background.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
706
A sign shall be posted and maintained within each stair enclosure on every floor, indicating the number of the floors.The numerals shall be of bold type and at least 75 mm high. The numerals and background shall be in contrasting colors. The sign shall be securely attached to the stair side of the door.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
900
Stair Re-entry Signs sign shall be posted and maintained on each floor within each stairway and on the occupancy side of the stairway where required, indicating whether re-entry is provided into the building and the floor where such re-entry is provided.The lettering and numerals of the signs shall be at least 12.5 mm high of bold type. The lettering and background shall be of contrasting colours and the signs shall be securely attached approximately 1.5 m above the floor level.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
706
Fire order board should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'. 1. Alert the security at security room by actuating manual call point located at strategic locations.
2. Evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points.
3. If possible try to extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet riser.
4. Be calm and do not give any room from panic, walk, do not run.
5. If you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
9
-
706
Action by security/reception upon receipt of information through fire alarm or fire detectors or by using public address system. 1. Alert the occupants by using public address system.
2. Inform fire control through any one of the following phone numbers: 101 /(local numbers)
3. Refer evacuation plan from evacuating standard people.
4. Guide the fire force, on their arrival to the seat of fire.
5. In case of the casualties, call ambulance by dialing number 108.
The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
900
Fire Detection & Alarm System
-
-
-
Supply, Installation, testing and commissioning of wall mounting 4 loop micro processor based analog addressable fire control panel expandable by minimum 2 additional loops with minimum 80 character LCD display 4
access levels 1000 events, historical logging, flash EPROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as per the specification and as required fixing of 4 loop Micro processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
282775
Supply and instllation of intallegent analogue addressable photo electric smoke detector including cost of base plate etc., complete as per specification with required fittings and accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
135
-
3863
Supplying, installing, testing and commissioning of Addressable Beam detector with transmitter and receiver with fixing accessories , modules etc, complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
37851
Supply and installation of intallegent analogue addressable rate of rise cum fixed temparature heat detectors including the cost of base plate. 75mm dia MSdetectors including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5
-
3915
Supplying, installing ,testing and commissioning of Duct Detectors (Outgoing Type). Duct detectors shall be modular type and ideally suitable for smoke detection application within the confined space of ventilation ducts. Detectors shall be “UL” listed. It shall possible to provide early warning to prevent smoke from circulating through out the building. Detectors shall continuously sample air flow in the HVAC duct and initiate an alarm whenever smoke detected The duct detector shall be as per technical specification. The detectors shall be of UL listed.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
3142
Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
22
-
4509
Supplying, installing ,testing and commissioning of Response Indicator complete with all accessories etc., for above false ceiling and of monitored type. The response indicator shall be as per technical specification.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
148
Supply and installation of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. Complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
22
-
4818
Supply and Installation of Intalligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8
-
3863
Supply and Installation of Intalligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
3996
Supply and Installation of Intalligent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
4231
Providing ,fixing , testing and commissioning of Control relay module shall be capable of providing tripping of AHU's / release of access doors / barriers/Lift machines .The Addressable control relay module shall be as per technical specification and module shall be of UL listed /EN approved .The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
3575
Supply and laying of 1.5 Sqmm (22/0.3mm)2 core PVC Insulated and FRLS Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Nakoda / Sun cab / Sudhakar / Powerflex/Gemni
3500
-
77
Providing ,laying , testing and ommissioning of 25 mm dia.MS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
250
-
190
Supply of ISI, 20mm dia, 16 guage thickness MS conduit pipe.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
5800
-
161
Supply of 19/20mm width and 12.5mm height Casing and Caping.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1500
-
27
Supply of 19/20mm PVC Flexible Couplings. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3000
-
12
Supply of 20mm PVC Flexible Pipe.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Precision
1500
-
14
Supply and Installation of 300mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
568
Public Address System
-
-
-
Providing ,fixing , testing and commissioning of 6 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
1317
Providing ,fixing , testing and commissioning of 6 Watt ceiling mounted speakers with built in line matching transformer, grill flush mounting type.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
120
-
1317
Providing ,fixing , testing and commissioning of 15 Watt ceiling mounted speakers with built in line matching transformer, grill flush mounting type. Vendor shall consider necessary mounting support/accessories for fixing the speker from the truss/purlin. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
4038
Providing ,fixing , testing and commissioning of B-class Amplifier of 480 W RMS out put in rack, including necessary control wires, jocks etc. complete as per the technical specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
34320
Providing ,fixing , testing and commissioning of PA controller with micro processor based priority module , mixing amplifier, with 18 zones with router,call station key pad, power supply unit & goose neck micro phone etc complete as per the technical specifications.The controller shall expandable up to min of 60 zones.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
253000
Providing ,fixing , testing and commissioning of 19" Rack 650mm depth with suitable "U" high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 SWG powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coated of approved color and spare 'U' shall be covered with blank panels.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
19042
Providing ,fixing , testing and commissioning of Compact Disk player ( i.e., DVD, MP3 & ACD player) with 3 CD changer & dual cassette deck and AM/FM and tuner built in single module.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
31207
Supply of 1.5 Sqmm (22/0.3mm)2 core PVC Insulated and FRLS Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI
/ Nakoda / Sun cab / Sudhakar / Powerflex/Gemni
4100
-
50
Emergency Talk Back System
-
-
-
Providing ,fixing , testing and commissioning of 25 Zone Talk back controller made of CRCA sheet housing and rack as required. The Controller shall be micro processor based priority module , mixing amplifier, all call / call back facility with key pad, power supply unit & goose neck micro phone etc complete as per the technical specifications. The Console shall have minimum of 8 hrs battery back up and it should also work on AC single phase power. The Controller shall be as per the technical specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
148500
Providing ,fixing , testing and commissioning of B-class Amplifier of 240 W RMS out put in rack, including necessary control wires, jocks etc. complete as per the technical specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
31896
Providing ,fixing , testing and commissioning of 6W two way talk back Speakers WITH talk back switch made of CRCA sheet fabricated and of wall mounted type with required junction boxes and complete fixing accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
22
-
8237
Access Control System
-
-
-
Supply, Installation, Testing and Commssioining of 2 reader controller, power supply unit, TCP IP connectivity with tamper detection provision as per the tender specifications.Cost should include enclosure and power supply unit for controller (power supply unit shall inclusive of battery backup including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: SPICA/Lenel / Honeywell / Software House
21
-
23265
Supply , installation testing and commissioning of Proximity Card Readers with Read Range 2"-3" along with all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: HID / Indala / Exceed
42
-
5693
Supply, Installation, Testing and commissioning of Emergency door release along with surface box with common, NO, NC contacts for Emergency Access door release along with all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge Make: KAC, PCB fire.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
21
-
1288
Supply, Installation, Testing and commissioning of 600lbs capacity Single Leaf Electromagnetic locks for Access doors along with all fixing accessories including the cost of ZL,U Brackets required as per site condition including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: BEL / Ebelco / Abloy
4
-
3168
Supply, Installation, Testing and commissioning of 600lbs capacity Single Leaf Electromagnetic locks for Access doors along with all fixing accessories including the cost of ZL,U Brackets required as per site condition including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: BEL / Ebelco / Abloy
17
-
8316
Supply, Installation, Testing and Commssioining of surface / flush mounted Magnetic Contact (Door position sensor) for access controlled doors.without Buzzer. with all necessary accessories as complete including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: ADEMCO, SENTROL, EUROFLEX
38
-
535
Supply, Installation, Testing and Commssioining of exit switch & accessories suitable for mounting on metal surface/metal frames or wooden frames wall or as required based on site conditions with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: KAC, PCB fire
2
-
668
Supply, Installation, Testing and commissioning of Seamless Intergated Access Management Software with the following module including the cost of license for 30 doors & 60 readers with 2000 card license with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:SPICA/Lenel / Honeywell / Software House
1
-
164637
Supply , installation testing and commissioning of Switching Mode Power Supply Units for Locks along with all accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
21
-
2351
Supply and laying of 8 core x 0.75 Sq mm multi strand, shielded, over all PVC sheathed Unarmoured cable in existing cable tray / existing Conduit including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Polycab / Belden / Varsha / Finolex
900
-
77
Supply and laying of 4 core x 0.75 Sq mm multi strand, shielded, over all PVC sheathed Unarmoured cable in existing cable tray / existing Conduit including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Polycab / Belden / Varsha / Finolex
4920
-
45
Supply and laying of 2 core x 0.75 Sq mm multi strand, shielded, over all PVC sheathed Unarmoured cable in existing cable tray / existing Conduit including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Polycab / Belden / Varsha / Finolex
890
-
35
Supply and laying of 2 mm thick ,25mm dia PVC conduit with all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: VIP / National / UNIVERSAL
6704
-
64
CCTV SYSTEM
-
-
-
Supply, Installation, Testing and commissioning of IP Dome Camera 2MP IR IP H.265 Vandal Proof Compact Dome camera with 2.8mm (Optional 4mm) Fixed Lens, POE and 30M IR support.UL Listed with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Norden/Axis / Honeywell / Pelco/Bosch
42
-
5990
Supply, Installation, Testing and commissioning of IP Bullet Camera 2MP IR IP H.265 Compact Bullet camera with 4mm (Optional 6mm) Fixed Lens, POE and 30M IR support.UL Listed with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make :Norden/Axis / Honeywell / Pelco/Bosch
17
-
11138
Supply, Installation, Testing and commissioning of 32 Channel NVR 32Ch Embedded Network Video Recorder with 4 HDD Bays Supports 4K Cameras, HDMI, VGA and ONVIFwith all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make :Norden/Axis / Honeywell / Pelco/Bosch
2
-
50342
Supply, Installation, Testing and commissioning of 16Ch Embedded Network Video Recorder with 2 HDD Bays Supports 4K Cameras, HDMI, VGA and ONVIF with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.Make: Norden/Bosch /Interlogix
1
-
19157
Supply , installation, Testing and Commissioning of 6 TB Surveillance Hard Disk with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: DELL, HP/
6
-
18563
Supply, Installation, Testing and Commissioning of 24 Port Network PoE Switch with 2 Nos of 10/100/1000 Mbps copper port with all required accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Cisco /HP/ Allied Telesis
3
-
38610
Supply, Installation, Testing and Commissioning of in inside the Wall mount / Floored Rack, of Category 6 24 loaded Patch panel with support Manager ,as complete with all respects complying with relevant standard specification including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Cisco /HP/ Allied Telesis
3
-
13634
Supply, Installation, Testing and commissioning of 42 Inch Display Monitor with Brackets and Accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Sony / LG / Samsung
2
-
52965
Supply, Installation, Testing and Commissioning of 12 U Rack with all required accessories to mount Switches along with PDU and all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Cisco /HP/ Allied Telesis
3
-
8294
Supply and laying of Cat 6 UTP Cable with complete accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: AMP / Digilink/ Equivalent
5310
-
30
Supply and laying of 2 mm thick, 25 mm PVC Conduit with complete accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:VIP / National / UNIVERSAL
5310
-
64
Audio & Video System
-
-
-
Supply, Installation, Testing and commissioning of Hub Pro,Wireless presentation system with Video conferencing System with all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: ZOAPI /CRESTRON/ EXTRON
1
-
190575
Supply, Installation, Testing and commissioning of Camera with all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: LOGITECH/POLYCOM/ AVER
1
-
29799
Supply, Installation, Testing & commissioning of Bluetooth Speaker with Mic for meeting rooms with all accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Yamaha/BOSCH/ BOSE
1
-
52470
Supply, Installation, Testing & commissioning of VGA/ HDMI cable 15 mtrs with Face Plates and Accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge..Make: Extron/ Kramer
2
-
35640
Supply, Installation, Testing & commissioning of Pro Display with brackets and accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make : PANASONIC/ SONY/ SAMSUNG
2
-
72270
Supply, Installation, Testing & commissioning of Short Throw Interactive WXGA 3LCD Projector Projector with Motorised Screen with all necessary accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make : PANASONIC/ SONY/EPSON
2
-
121770
Supply & Surface laying of 25mm dia PVC FRLS conduit with all accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make:VIP / National / UNIVERSAL
40
-
54
Building Management System
-
-
-
BMS Server
-
-
-
Supply, Installation, Testing and Commissioning of BMS Server shall comprise of the following minimum hardware: i7 min 3.2 GHz processor, 12 GB of RAM or higher, 21” LCD Color Display (1280 x 1024)( MAKE :HP / DELL / LG /SAMSUNG) , 12 function-126 key keyboards (English) Mouse pointing device (Make : LG / SAMSUNG / MICROSOFT); 1TB HDD for OS & BMS Software, and BMS Database. DVD Combo Drive, Graphics Card – NVS 315 or higher version,1024MB DDR3or better; NIC (network interface card) for Ethernet Networking compatible with TCP/IP network protocols (UTP/Fiber); Complete with with AntiVirus, MS Windows Client Software and operating license. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
102960
Supply , installaion, testing and commissioning of A 4 size Color Alarm Printer suitable for the application, with driver software, connecting cables etc.,. with all accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.MAKE: HP / DELL / LG /SAMSUNG
1
-
27423
Supply , installaion, testing and commissioning of Network Switch : 24 port switch with 10/100/1000 Switches with all necessary accessories as per site specific System requirement.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE : CISCO /HP/ ALLIED TELESIS
4
-
38610
Building Operating System: Software
-
-
-
Supply, Installation, Testing and Commissioning of Building Automation Server software, with 2500 I/O point, unlimited concurrent users and it shall utilize the latest JAVA technologies.
The software should have capability of integrating Modbus/IP, BACNET/IP, Lonworks/IP, SNMP, KNX and M-Bus/IP without any additional integration costs or software drivers. The system should have following features:
- System Integrations
- Graphical User Interfaces
- Profiles and User Rights
- Alarm Handling
- Trends and Event Logs
- Monitoring and Reporting
- JS based Scripting Interface including all material.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
MAKE : Netix Controls / CYLON Controls / Siemens
1
-
545708
Engineering and Commissioning Dongle/ License of the manufacturer. (Including handing over of the Engineering and Commissioning Dongle/ License of the manufacturer to the user department at the time of handing over)
-
-
-
Making of Email Alerts of Alarms with all necessary aceesories as complete including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge..
-
-
-
Building Operating System: Hardware
-
-
-
Supply, Install, Testing and Commissioning of DDC controller with 32 bit processor, 512KB Flash Memory and 512KB RAM with SD Card Slot for Memory Expansion and real time clock with internal schedules to maximise energy savings of the buildings. Controller should communicate on the international ISO 16484-5 BACnet® standard, it should be freely programmable controller with 16 PID Controllers and LEDs for both I/O status indication and diagnostic for RS-485, Ethernet and communication bus. Controller should have HOA (Hand - Off - Auto) Override Switches for DO/AO. Controller must have on-board RS-485 channels for BACnet MS/TP or Modbus communication complete with DDC Housing Panel. IO unit if any should communicate directly on BACNET/IP and not on a slave network and independent of the controller. Each Unit (Controller or IO Unit) should not exceed more than 25 points.
-
-
-
The DDC Panel shall be MS Powder Coated, IP 44 Rating for indoor; and IP 54 for outdoor. The DDC Panel shall be with proper mounting accessories for DDCs such as DIN Rails, Elemex Terminals for Cable Terminations, Dressings for internal cabling, ferruling, tagging etc. The DDC Panels shall have SMPS Power Supply to meet the power requirement of the DDCs, Instrumentation and other connected equipment. Shall be Complete with pilot relays, fuses, overload protection relays, auxiliary power output socket etc. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.MAKE:Netix Controls / CYLON Controls / Siemens
-
-
-
Soft Integration of Addressable Chiller Plant Manager on RS 485/RTU ModBus communicable.
1
-
2772
Soft Integration of Addressable DG on RS 485/RTU ModBus communicable..
1
-
2772
Soft Integration of Addressable UPS on RS 485/RTU ModBus communicable..
1
-
2772
Soft Integration of Addressable Lift Panel on RS 485/RTU ModBus communicable.
1
-
2772
DDC for CSU (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
23
-
63261
DDC for AHU (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
4
-
63261
DDC for Kitchen Ventilation Unit & Exhaust & Scrubber Units for Ground Floor (Must include atleast, two IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP) and one IP Controller with 22 UI.MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for Cassette Unit, High Wall Unit and Exhaust Unit for First Floor (Must include atleast, two IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP) and one IP Controller with 22 UI.MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for Cassette Unit, High Wall Unit and Exhaust Unit for Second Floor (Must include atleast, three IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP) and one IP Controller with 22 UI.MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for HV Switch Gear (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for LT Kiosk (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens.
1
-
63261
DDC for Main LT Panel (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for APFCR Panel (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for Transformer (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
DDC for PHE & FIRE (Must include atleast, one IP Controller with minimum 8UI, 12 (AO+DO)) points with Modbus RS 485/ BACNET MS-TP).MAKE:Netix Controls / CYLON Controls / Siemens
1
-
63261
Field Sensor
-
-
-
Supply, Installation, Testing and Commissioning of Duct Return Air Temperature & RH Sensor.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.. MAKE:Netix Controls / CYLON Controls / Siemens
27
-
12227
Supply, Installation, Testing & Commissioning of Differential Pressure Switch, Air with all necessary accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE:Greystone / Dwyer/Johnson Controls / Siemens
27
-
3495
Supply, Installation, Testing & Commissioning of Temperature Sensor.with all complete necessary accessories .The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE:Netix Controls / CYLON Controls / Siemens
27
-
2366
Supply, Installation, Testing & Commissioning of Co2 Sensor & Temperature Sensor.with all complete necessary accessories. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE:Netix Controls / CYLON Controls / Siemens
27
-
39184
Supply, Installation, Testing and Commissioning of Duct Static Pressure Transmitter.with all complete necessary accessories .The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.MAKE:Netix Controls / CYLON Controls / Siemens
27
-
13939
Supply, Installation, Testing and Commissioning of Outside Air Temperature Sensor.with all complete necessary accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE:Netix Controls / CYLON Controls / Siemens
1
-
5326
Cabling and Containment
-
-
-
Supply, Installation, Testing and Commissioning of Cabling for instrument, controls, valves to DDCs and communication cabling from DDC to central equipment complete with earthing, supports etc complete. Laid on Surface / On Cable Trays. All Cables shall be ferruled and tagged, and shall use lugs for termination at both ends. All cables shall be properly glanded at Panel and the third party field panels to ensure proper installation.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE : Polycab / Belden / Varsha / Finolex
-
-
-
Armoured 1P x 1.0 sq.mm. FRLS Shielded Copper Cable for control cabling
5000
-
84
Armoured 2P x 1.0 sq.mm. FRLS Shielded Copper Cable for control cabling
1000
-
106
Armoured 4P x 1.0 sq.mm. FRLS Shielded Copper Cable for control cabling
500
-
116
Armoured 4P x 1.0 sq.mm. FRLS Shielded Copper Cable for control cabling
1000
-
138
Armoured Communication cable: 2P x 1.0 sq.mm. FRLS Shielded Copper Cable
5000
-
84
Communication cable: Cat 6 with PVC conduits
5000
-
64
Supply, Installation, Testing & Commissioning of Perforated GI cable tray with Cover with the following sizes: with supports, all fittings and mounting accessories, etc complete to installation requirements. All Bends / Tees for cable trays shall be factory fabricated and not site fabricated and all necessary accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: PUSHPAK / INDIANA / PROFAB
-
-
-
100 mm x 25 mm x 1.6mm
150
-
266
150 mm x 50 mm x 1.6mm
35
-
458
300 mm x 50 mm x 1.6mm
45
-
842
(Rupees Eighteen Crores Forty Four Lakhs Eighty Thousand Four Hundred And Fourteen only)
-
-
-
Part-I
-
-
-
Part-II - Seigniorage Charges payable as per actuals
-
-
-
Note :
-
-
-
1) The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit. The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons labour welfare cess, District mineral fund and work insurance and no reimbursement for these will be made. 2)The above rates for finished items of work including cost and convenyance of all requisite materials to site, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc., including all taxes except GST & Seigniorage Charges . 3)Shop drawings should be prepared by the agency at own cost for approval where ever required.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements