Telangana State Industrial Infrastructure Corporation Limited Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
150069Bid Award Id
ViewTender No
27/CE/TSIIC/2019-20, Dated: 25.10.2019Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Partition above false ceiling level, closing by Calcium silicate board with frame work : Providing and fixing partition above the false ceiling level using aluminium box frames of size 50 x 25 x 1.5 mm thickness at 610mm c/c on both directions and to be covered with 12mm thick single layer calcium silicate board on both sides. The joints are to be finished with jointing compound as per manufacturers specification. The boards shall be fixed with counter sunk stainless steel / fully threaded self tapping screws of suitable dia and length at every 300mm c/c. (Above full glass partitions) etc. complete for finished item of work excluding GST.
84
-
4551.4
... More
Supply and Fixing of Slim Profile Glass partition of 10mm Toughened Glass using Dorma System-45 Frames or approved equivalent make to a height of maximum 2.7m or as per drawing. The Fixed glass to be fixed using BP45 Profiles at Top & Bottom, Side Profiles SP45 at sides. The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. In case of Glass overall panel MP45 & BP45 Overpanel Profile to be used. In case of Open glass edges EP45 End Profile to be used. The profiles shall be suitable for Glass thickness of 10/12/13.52mm. The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system
All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.
Rate shall include for providing transport charges, handling, loading and unloading, Installation, protecting the module and glass till handing over, testing, commissioning all necessary hardware's, scafolding, wastage, Structural supports if any, etc. complete and all as per manufacturers specifications as directed excluding GST.
Approved Manufacturer: Profiles / Frames: DORMA / JEB ASIA / Deko / Alloy or equivalent, Glass : Saint Gobain / Asahi
159
-
5373.2
... More
Supplying and fixing Frame less Single leaf/ Double Leaf Glazed Door of 12 mm thick toughened glass of different sizes Fully openable Patch Fitting partition and door of ' DORMA' "PT" range Fittings to get a clear height with top & Side Fixed panels. In general, the openable door cum Fixed panel consists Glazed Door GD: PFinish: Satin stainless steel including cost and coneyance of all materials to site, all labour charges, all taxes etc complete for finished item of work as directed by the Engineer In charge. Dorma Patch fitting with the following ItemsPatch fitting Set for frameless Single glass door consisting of: 1 Nos of PT 10 Bottom patch with satin SS cov.er,1 Nos of PT 20 Top patch with satin SS cover,1 Nos of PT 24 Top pivot plate, 1 Nos of Universal corner lock UL 10 ,1 No Floor spring BTS-75V EN 1-4,&, 2 No's Dorma Handle -TGDID 300 X 22 S,Satin SS 304, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
Approved Manufacturer: Profiles / Frames: DORMA / JEB ASIA / Deko / Alloy or equivalent, Glass : Saint Gobain / Asahi
-
-
-
... More
Single Leaf (Size of 1000 X 2400) MM
62
-
14736.6
... More
Double Leaf (Size of 1800 X 2400) MM
62
-
16094.3
... More
Providing and fixing 12.5mm thick Gypsum board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm
-
-
-
... More
and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, excluding GST etc. complete as per drawings, specification and direction of the Engineer in Charge
-
-
-
... More
12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095 - Part I (12.45.2)
948
-
1078.2
... More
For perforated Gypsum ceiling
36
-
1298.6
... More
FALSE CEILING WITH CALCIUM SILICATE BOARD
Providing and fixing Calcium silicate Board of 10mm thick placed on 600mm x 600mm grid system using 'Daiken'or approved equivalent make regular frame of suspended grid system with galvanized steel "T" section frame work of hot dipped galvanized steel pre-coated (exposed portion only), which includes flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centers to form 1200mm x 600mm modules. Cut cross tees longer that 600mm to be supported independently. 600 x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. The work shall be inclusive of applying two coats of plastic emulsion paint over a coat of primer and putty to the particle board tiles as per manufacturer specification.The item shall include call cut - outs required for light fixtures, smoke detectors and other services cut - outs, excluding GST as directed by Engineer incharge.
64
-
5326.3
... More
Providing & Fixing of Lay in Aluminium Perforated metal ceiling System consisting of 600 x 600mm Lay in tiles of pre coated Aluminium in 0.7 mm thickness in white colour with standard perforation of 2.5mm dia & open area of 16% and Freudenberg Soundtex acoustical fleece glued to the back of the tile to be laid on grid systems with 15mm wide T - section flanges colour white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees.
The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test. The tiles should have Humidity Resistance (RH) of 100%, NRC of 0.70, Fire performance A2-s1.d0 in module size of 600 x 600 mm, suitable for Green Building application, with Recycled content of 50%. The Tile & Grid system used together should carry a 15 year warantee.
INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural suffix at 1200mm maximum centre & not more than 150mm from spliced joints. The First / Last suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200 mm long cross tees to be interlocked between main runners at 600mm centre to form 600 x 600 mm module. Cut cross tees longer than 600mm require independent support. Perimeter trim to be wall angles, secured to walls at 450 mm maximum centers. The rate shall be inclusive of making openings for light fittings, grills, diffusers, cutouts, wastage and necessary hardware etc. excluding GST.
36
-
3013.7
... More
Providing and fixing one layer of 9 mm thick BWR ply to column panelling works, made out of anodized aluminium extruded sections of size 25 x 25mm x 1.5mm thick in both horizontal and vertical direction with proper wooden packing below the aluminium section for maintaining the 65mm gap at 600mm c/c spacing. The frame work should be screw fixed in to the column surfaces with necessary screws. The work shall be inclusive of necessary hardwares etc; as required for complete the works. Providing and fixing of one layer of 9mm thick of approved make BWR plywood on the partition Column surface aboce 150mm from false ceiling level, excluding GST.
39
-
3181.2
... More
Supply,providing and Installation Aluminium Skirting of 1.8 mm thick and 75 mm height fixed to the existing masonary wall/partitions,so as to flush with grooves to pattern installed as per drawing and skirting section with capping strip and make of Doyle asia /equivalent , as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges all overhead and contractor profit and excluding GST & seigniorage charges etc.,, complete as directed by the Engineer-in-charge for finished item of work for all floors and all levels .
203
-
584.6
... More
Providing and applying decorative texture paint of approved color / Pattern for internal walls including a base coat paint, application of primer, application of full putty etc to get the required smooth finish. Rate to include necessary surface preparation, application of protection layer all as per manufacturer specifications and excluding GST as directed. Rate also to including staging arrangement.
216
-
1574.7
... More
Providing and fixing white matt finish white mark writing board of enamelled sheet steel front, GI back over approved inner core, of specified size black or chocolate colour anodised aluminium beading to form the screen including the necessary accessories such as magnetic symbols, magnetic letters, magnetic strips, magnetic eraser, magnetic dry marker 4 Nos., spare felt for eraser, board fixing clips etc. and the board shall be made out of enamelled sheet with backing of AC sheet to suitable thickness etc. complete and all as per manufacturer's specification and as directed by the Employer / Architect. The rate include excise duty, sales tax and surcharge, central excise duty, delivery charges and fixing charges, if any etc. complete and all as directed by the Employer / Architect. Rate shall inclusive of making and fixing wooden ledge for full length of the board for keeping marker pen, eraser etc. Rate quoted shall be for the complete finished work including ledgeboard to keep accesories, and all materials and labour mentioned above excluding GST.
34
-
12526.1
... More
Providing and fixing soft board panel of specified sizes having 12mm thick soft board covered with felt fabric of approved make and shade of premium quality. The board shall have teakwood / cedar / beech / matching wooden beading, lipping around. The board shall be fixed on prepared surface with necessary hardware fittings etc. complete. All concealed wood works shall have sealer polish, excluding GST as directed. Rate quoted shall be for the complete finished work including all the materials and labour mentioned above.
35
-
4891.1
... More
Providing and fixing of 3M FASARA Translucent, Decorative cum safety, polyester, self-adhesive film applied directly on glass. The film adds shatter resistant property when covers the full area of glass. Manufacturer warranty of 3 years [if exposed to direct sunlight] and 5 years [indoors] endorsed by 3M India Limited. The work shall be inclusive of necessary adhesive and wastage etc. excluding GST.
88
-
5822.8
... More
Providing and fixing the Roller blind system consists of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide an everlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low – flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated Aluminium flat bottom rail of 290 gm to finish it from the ends it should have rail end caps. The clutch will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 5 Kgs of material. The clutch should mount flush to the face of the bracket which minimize the light gap between the shade and the window frame, excluding GST.
Basketweave white sand 5% (Optima sunscreen / Phifer / Vista)
162
-
3018.2
... More
Providing and fixing of 8mm thick lacquered glass of approved colour and Saint Gobain or equivalent make over the existing partition, paneling or wall / Column surfaces. The rate shall be inclusive of necessary SS Stud, hardware and wastage etc. excluding GST complete.
37
-
3244.8
... More
Providing and fixing of imported wall paper of approved design, fixing details as per manufacturer standard including cost and conveyance of all material to site and excluding GST.
60
-
1749.7
... More
Providing and fixing Glass Handrail of specilized Manufacturer of Dorma or Kinlong or Kich with stainless steel member for Balcony / Terrace at levels fabricated with 40 x 40 mm - 3 mm thick Square hollow tube or SS Plate 8mm thick - Twin plates as verticals with suitable height to support the glass as specified and spacing not more than 1050 mm. Top horizontal hand railing with S.S pipe of 50 mm dia - 3 mm thick and the top hand rail shall be fixed over the vertical member by using 6 mm thick SS Plate to profile as a connector between Horizontal railing and verticals with suitable size as per drawing and the vertical tubes/plates shall be fixed on the top or face of parapet by using suitable size of SS base plate with thickness not less than 8 mm and SS anchors (Min 2 Nos) as shown in the drawing.
17
-
23416.6
... More
Rate shall include the cost for providing 1500 mm high - 12.52 mm thick laminated glass having 6 mm thick as outer panel and 5 mm thick as inner panel with inter layer of 1.52 mm thick Sentry Glas of Dupont make. Both Outer pane and Inner pane shall be uncoated clear glass of Saint Gobain / Asahi make and shall be heat treated and heat soaked as shown in the drawing etc complete. All the exposed edges of laminated glass shall be covered with Clear PVC edge strip as a edge protection. The laminated glass shall be fixed in to the vertical member by using 20 mm square/circular pipe to support SS two way arm and articulated bolts of Kinlong / Dorma make or approved equivalent make as directed. Rate shall include necessary tools & Plants, supplying and fixing of glass, railing, articulated bolts and arm, SS cover plate, screws, 225 x 75 - 10 mm thick SS base plate & SS 316 grade anchors (Minimum 2 nos of M10 - 90 mm long) to receive the vertical member, welding with consumables & buffing charges etc. complete as directed. All Railing, 2 way arm, stud & articulated bolts etc shall be SS 316 grade - Mirror finish, excluding GST.
-
-
-
... More
Providing and fixing Column panelling frame work, made out of anodized aluminium extruded sections of size 25 x 25mm x 1.50mm thick in both horizontal and vertical direction at 600mm c/c spacing. The frame work should be screw fixed in to the wall / column surfaces with necessary screws. Proivding double layers of 6mm BWR ply finished with 1.0 mm approved laminate on top upto false ceiling.The work shall be inclusive lf necessary hardwares etc. excluding GST as required for complete the works.
40
-
2830.9
... More
Providing,Preparing the surface with 8 mm thick laminated wooden floor as per the pattern with tongue and groove joints with 2mmm foam backing of abrasion resistence of AC4,impact resistance LC2,stain resistance group 4/5,cigratte burn class 5,colour fastness class 7,furniture legs:No damage,chairs casters no damage,thickness swelling 18%,static indentation 0.9 KV,surface soundness,dimension with approved make Mikasa/Actiontessa , make as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .
208.68
-
2290.5
... More
Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure (Tubular Structure:- made from Steel hollow sections conforming to IS 1161/4923, Grade Yst 240 , thickness upto 10mm (from SAIL/TATA/JINDAL/APL APOLLO make) in the profile as per conceptual drawings with special plate connector, pinion joints, Plates, hollow sections etc using water jet 3-D cutting system for obtaining smooth 3-dimensional curvature, SAW/MMAW/MIG welding process with special plate connectors, pinion joints, plates, hollow sections with cleaning the surface with sand blasting system and applying a coat of epoxy primer and including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings, transportation from fabrication yard, cutting, threading, machining, leads and lifts upto all heights, tools etc. required for all operations involved to make structure of Tensile fabric canopy. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure has to be provided as per conceptual drawings of Tensile fabric profile, including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be painted with one coat epoxy primer, one coat of Epoxy Intermediate MIO and one coat of Polyurethane paint on steel work at all locations prepared by sand blasting in required DFT (dry film thickness) for each coat as specified in particular specification. The work is to be executed as per technical specification and direction of Engineer-In-Charge, excluding GST.
345
-
11452.4
... More
Providing, fabricating, assembling and erection of prestressed Tensile Membrane Fabric structure in desired profile as per drawing, with SATTLER type-II or equivalent having minimum Tensile strength (Warp/Weft) 5600/5500 N/5 cm & minimum tear strength (Warp/Weft) of 1000 /900 N, both side PVDF coated polyester fabric and should be weldable having a minimum weight of 1200 g/sqm as per particular specification with a 12 years warranty etc. over steel frames with all fittings and fixtures such as Galvanised MS Membrane /End Plate, Shackles, Rigging Screws, Turnbuckles, Swedge, Fork, Keder rods, Aluminium strips with nut -bolts/fasteners and galvanized MS strands /cables with stainless steel end terminals complete as per drawing / detail & as per technical specifications and as per the instructions of Engineer-in-charge. (Rate includes cost of fabric, shop drawings, patterning, forming, cutting, fabricating, High Frequency weld of fabricusing FIAB 900 Movable machine min 40 mm electrode and Max 80 mm electrode, Transport to the site, assembling, aluminium strips/flats fixing and installation with GI strands/Cables, hardware and required accessories wherever required complete including lifts upto all heights, tools and plants etc. required for all operations. (Note: Actual surface area of fabric shall only be measured)
-
-
-
... More
Providing and supplying for Design, engineering, and patterning of Architectural Membrane, cables and related perimeter attachment and hardware i/c associated structural steel members, RCC foundation work, rain water drainage system with all relevant calculation sheet. Issue of “Good for Construction Drawings” and revision of drawing and its vetting if required during execution etc. as specified in tender document and any other details related to the work which are essential for successful execution of works etc complete as per direction and satisfaction of Engineer-in-Charge. Note:- The steel structure members has to be designed as per conceptual drawings of Tensile fabric profile including all Arch, beam, curved, lateral beams and bracings, vertical support columns, nodal joints, bases of columns and Stainless Steel pin joints as applicable.
-
-
-
... More
Supplying and fixing of following sizes of medium class MS conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : NAI / Bharath / GB / BEC.
-
-
-
... More
20mm 1.6mm Thick MS Conduit
50
-
166
... More
25mm 1.6mm Thick MS Conduit
50
-
194
... More
32mm 1.6mm Thick MS Conduit
50
-
259
... More
Supply and fixing of following size medium grade, FRLS with IS:9537 part 3 regid PVC pipe, PVC Junction Boxes,Normal with dummy cover,, 1.5mm thick PVC Bend including labour charges fox fixing the pipe with all accessories etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Sudhakar/Modi/Million plast/Finolex/VIP
-
-
-
... More
20mm dia 2mm thick PVC pipe
400
-
59
... More
25mm dia 2mm thick PVC pipe
600
-
66
... More
32mm dia 2mm thick PVC pipe
800
-
86
... More
Wiring with three runs of 1.5 Sqm FRLS PVC insulated flexbile copper conductor cable as Phase ,neutral and earthing in the existing MS conduct pipe with 6A modular type switch with PVC module front plate and including all labour charges etc., complete for light point, call bell point and exhaust fan points etc complete. Makes of Wire : Finolex / Havells/ Polycab(HR_FR-LF),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. . Make of Modular Switch & Socket:Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
-
-
-
... More
1 LP Controlled 1 Switch
120
-
839
... More
2 LP Controlled 1 Switch
80
-
942
... More
3 LP Controlled 1 Switch
40
-
1045
... More
4 LP Controlled 1 Switch
20
-
1148
... More
5 LP Controlled 1 Switch
10
-
1251
... More
6 LP Controlled 1 Switch
10
-
1354
... More
Supply and laying of 3 runs of 36/0.3mm (2.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
1950
-
103
... More
Supply and laying of 3 runs of 56/0.3mm (4.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
1430
-
147
... More
Supply and erection for approved make 1No 2/3pin 6A modular universal socket with 6A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete for Raw Power Points.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
120
-
695
... More
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR TELEPHONE CONNECTION mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
50
-
1349
... More
Supply and erection for approved make 3Nos 16/6A 2 /3 Pin 2 Module Modular Universal Socket with 1 No.6A modular switch & RJ45 CONNECTOR FOR TELEPHONE mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
30
-
2363
... More
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Legrand / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare
15
-
839
... More
Supply and erection for approved make 3Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR DATA CONNECTION mounted on POPUP TYPE GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
15
-
7772
... More
Supply and erection for approved make 1Nos 6/16A 3/5 Pin 2 Module Modular Universal Socket with 1 No.16A modular switch & RJ45 FOR TELEPHONE CONNECTION mounted on POPUP TYPE GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
30
-
3704
... More
Supplying and fixing 16 A, 230 V, DP Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
6
-
7002
... More
Supply, erection, testing and commissioning of 8 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, single door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40A DP 30mA RCBO as incommer and 6 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
3
-
9217
... More
Supply, erection, testing and commissioning of 8 way Horizontal SPN DB powder coated 1.6mm CRCA sheet steel enclosure, single door type, IP 43 protection as per IS :13032 and suitable for 1Nos - 40A DP 30mA RCBO as incommer and 8 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
3
-
9694
... More
Supply, erection, testing and commissioning of 4 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63A FP RCBO as incommer and 12 nos. 6-32A 10KA SP MCB as outgoings including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
12
-
13631
... More
Supply, erection, testing and commissioning of 6 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63A FP RCBO as incommer and 18 nos. 6-32A 10KA SP MCB as outgoings including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
3
-
16585
... More
Supply, erection, testing and commissioning of 8 way Horizontal TPN DB powder coated 1.6mm CRCA sheet steel enclosure, double door type, IP 43 protection as per IS :13032 and suitable for 1Nos 63-100A FP RCBO having sensitivity of 30mA and 24 nos. 6-32A 10KA SP MCB as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
1
-
18573
... More
Supply, erection, testing and commissioning of 8 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole 125A MCCB,25kA as incommer and 8 Nos 40-63 A TPN MCBS as outgoers including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Switch gear Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree/Havells. DB Make:Legrand / Schneider / Siemens / L&T/Cabtree)
3
-
33128
... More
Supply and fixing of 100mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
700
-
514
... More
Supply and fixing of 150mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
678
... More
Supply and fixing of 300mm x 38mm G I Raceways of 2mm thick with top cover and required hard ware including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
650
-
1161
... More
Supply and fixing of GI Junction box of size 178mm x 52mm of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
389
... More
Supply & Fixing of 222mm x 52mm G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
485
... More
Supply & Fixing of 372mm x 52mm G.I. Junction box of 2mm thick for direct acces to cables at the inter section of Raceways. thick including labour charges fox fixing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
60
-
934
... More
Supply,fixing and transportation of 22W, 2300 lumens, 1200mm length T5 LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: 2KV, THD10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc. complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya /Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
40
-
987
... More
Supply,fixing and transportation 22 W LED LINEAR Architectural LIGHT CEILING MOUNT :‐ Body Material : Extruded Aluminium ‐6063 with powder ‐ coating Diffuser : PMMA diffuser L1135mm,W‐60,h‐80mm Body Color : White, Silver, Black Fixed/ Adjustable : Fixed Light Source : SMD 2835 Beam Angle : 103.2˚ Color Temperature : 3000K, 4000K CRI : ≥80 Ingress Protection : IP20 Driver : Constant Current Input Voltage : 220‐240V /50‐60Hz Dimming Options : Triac, 0‐10V, DALI Mounting Arrangement: Surface mounted / suspended kit.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips/ Wipro /Crompton / Bajaj / Havells / Jaquar / HPL /Syska /Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
40
-
2918
... More
Supply,fixing and transportation of 36 w Back lit, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range,Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro /Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
100
-
4293
... More
Supply,fixing transportation of 18W LED Down Light Recessed / Surface mounting round/ square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
30
-
2304
... More
Supply,fixing and transportation of 7 LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
30
-
1384
... More
Supply,fixing and transportation of 36W LED DOWN LIGHT ROUND :1. Module structure, adapted to different LED light source and beam angles. 2. Different colors and anti‐glare designs of reflectors for choice, realizing spot, flood or wall washer lighting effect. 3. Patented structure design, die cast lamp body, simple but elegant. Approved Make: Delta,Simes,Flos, Qlite 4. UGR15 Secondary calculus lens tech, accurate light distribution , pure light spot, multi‐anti‐glare tech. 5. Various drivers for option, nonflicker, smart control, etc. 6. IP20, IP44 for option. 7. Serialized products with multiple dimensions, and powers ranging from 9 W to 40W. 8. Lifespan up to 50,000 hours,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Approved Make: Delta‐Grand Reo XL,Igguzini‐Reflex N107, Qlite‐ QL‐RMod‐C‐01‐FRDL
10
-
12007
... More
Supply,fixing and transportation of 18 W DOWN LIGHT HANGING ROUND SHAPEDLUMINAIRE,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. MAKE : Phillips / Wipro / Crompton / Bajaj / Havells / Jaquar / HPL / Syska / Surya LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
12
-
4170
... More
Supply and laying of 2.5 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal/ Polycab / Havells / KEI.
700
-
133
... More
Supply and laying of of 4 Sqmm 3 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I)including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells/ KEI.
400
-
168
... More
Supply and laying of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal/ Polycab / Havells / KEI.
300
-
527
... More
Supply and laying of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal /Polycab / Havells/ KEI.
200
-
892
... More
Supply and laying of 25 Sqmm 4 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
200
-
1261
... More
Supply and laying of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I). including labour charges for laying and giving connections etc.,complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Universal / Polycab / Havells / KEI.
60
-
8045
... More
Supply and laying of 25x3mm GI strips 0.3M above/below ground including cost of all supports, insulators, washers, nuts & bolts including labour charges for fixing and giving connections etc., complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
67
... More
Providing and fixing 8 gauge cu wire on surface or in recess for loop earthing as required including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
150
-
95
... More
Supply and Fixing of Modular socket type Telephone jack with Connector,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.Krone)
80
-
288
... More
Supply and Fixing of approved make of plug - in type LAN RJ-45 socket outlet with G.I outlet box and cover plate complete as required in 3 module plate including cost and conveyance of all materials and labour charges commissioning of CAT 6 including testing and giving report to each point etc complete,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / Legrand AMP / Krone)
80
-
563
... More
Supply and laying of Cat 6 LAN cable in the existing PVC/MS conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes:D Link / AMP / Molex/Legrand)
600
-
25
... More
Supply & installation of 24 port Network switch in existing rack will all necessory accessories as required including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : CISCO / Net Gear / HP / Dlink.
3
-
9169
... More
Supply & installation of 6U wall mount Network rack with power spike including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-HCL/Vall
3
-
4889
... More
Supply & installation of 24 Port Patch Panel including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-D link/AMP/Molex/Legrand/Krone
3
-
6707
... More
Supply & fixing of 7 feet length moulded patch cord including labour charges for fixing and giving connections etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-D link/AMP/Molex/Legrand/Krone
36
-
239
... More
Supply and Laying of 12 core Single mode armoured Indoor/outdoor OFC cable with all necessary fitting including labour charges for laying etc., complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : D Link / AMP / Molex / Legrand / Krone.
200
-
114
... More
PANEL TYPE -01 : Incoming :100A CHANGEOVER SWITCH -1NOS.100 FP Variable Type MCCB with Manual Closing Mechanism of 36 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -1NOS. Busbars : 160A, 4P Aluminium Busbar Chamber for the entire length of the Panel, Outgoings: 63Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -6 NOS., 40Amps FP Variable Type MCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection -2 NOS.. Metering : i) Digital Load Manager with RS 485 port, ii) LED type Phase indication lamps with individual 6A SP MCB control – 1sets, .iii) CTs800A/5A 15VA burden Class 1.0 Accuracy with 0-800A Digital Ammeter with inbuilt selector switch - 1sets.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Legrand/L&T/ Schneider/ ABB/ C&S
3
-
99527
... More
G.I. Pipe Earth station, Supply, erection, commissionig,testing and Providing standard G.I. Pipe Earth station, with 38mm dia. G.I. pipe including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogeneous mixture of salt charcoal around the pipe etc, completely as per IS 3043,1987 ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge..
12
-
4778
... More
Supply, erection, commissioning, testing and Providing standard Copper Plate Earth station, with 600X600X3.15mm thick copper plate including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogeneous mixture of salt charcoal around the plate etc, completely as per IS 3043,1987 or latest revision. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
4
-
13962
... More
Supply and laying of 50X6mm GI earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
197
... More
Supply and laying of 25X6mm GI earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
111
... More
Supply and laying of 25X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
926
... More
Supply and laying of50X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
500
-
1827
... More
Supply and laying of 8SWG Bare Copper wire including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
100
-
95
... More
Supply and laying of 8SWG Bare GI wire including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
19
... More
Supply and fixing of 4Nos of 9Ltrs capacity round bottom bucket with sand, duly painted with enamel white inside & red out side and letter FIRE with black colourin cluding required stand for holding sand buckets etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
1377
... More
Supply and fixing of 33KV grade Rubber Hand gloves as per IS standards,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
239
... More
Supply and fixing of First Aid boxes of size 18” x 12” x 8” ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
1284
... More
Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1Kg, Empty Weight 14.6Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty including transportation, and all labour charges etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Cease Fire/Minimax
3
-
11021
... More
Supply & Fixing of ABC stored pressure squeeze grip type Fire Extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty including transportation, all taxes and all labour charges etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Make: Cease Fire/Minimax
6
-
9271
... More
Supply, Transportation, Installation and commissioning of INVERTER Model Cool type split AC 2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with 2 years warranty and annual maintenance contract. Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi
6
-
67033
... More
(No of Items: 62)
-
-
-
... More
(Rupees Two Crores Nine Lakhs Thirty One Thousand Six Hundred and Eighty Two Only)
-
-
-
... More
Note :
-
-
-
... More
1) The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit. The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons labour welfare cess, District mineral fund and work insurance and no reimbursement for these will be made. 2)The above rates for finished items of work including cost and convenyance of all requisite materials to site, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc., including all taxes except GST & Seigniorage Charges .
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements