Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 25,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
231148Bid Award Id
ViewTender No
42/CE/TSIIC/2020-21, Dated:03.04.2021Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
IT Tower;Supply Installation, Testing, Commisioning of sleeve type motorised smoke and fire dampers with actuators, control panel, for supply and return air ducts. Necessary control panels shall be included to take fire signal and close the FD and switch of the AHU. The fire rating of the damper shall be of 90 min. Fire damper shall be with 450 / 600 mm sleeves suitable for the wall mounting. Fire damper shall open automatically when fault signal is removed. Fire damper actuator shall have 10Nm torque up to 1Sqm size & 20 Nm from 1.1sqm to 2.4 Sqm. of damper face area. Power cabling and control cabling distribution shall be included. Necessary relays, contactors, etc. required shall be included.
2
-
14742
... More
IT Tower;Supply Installation, Testing, Commisioning of GSS made volume control damper (VCD) with opposed blades as per the tender specification, frame shall be made of 18G and blades shall be made of 20G
2
-
9828
... More
IT Tower;Supply Installation, Testing, Commisioning of Acoustic lining for supply air ducts with 15 mm thick of open cell nitrile rubber Class "1" grade of 140-180Kg/Cum density as per the specifications and as shown in the drawings. Material thermalconductivity should be 0.047 W/mK @ 20 deg C & fire performance in accordance with BS476 Part 7 1997 & UL94 1996. manufacuter recommended Adhesive should be used to fix the Acoustic lining in the ducts.
20
-
16320
... More
IT Tower;Supply Installation, Testing, Commisioning of Thermal Insulation 19mm thick for SA ducts with pure aluminium foil faced XLPE Class O thermal insulation. Joints shall be sealed with 50 mm wide self adhesive aluminium tapes as per the specification.
300
-
103800
... More
IT Tower;SITC of Machine made GSS Ducting with required angle flanges & installation materials such as hitech supports/ anchor fasteners etc as required 22G
40
-
32760
... More
IT Tower;SITC of Machine made GSS Ducting with required angle flanges & installation materials such as hitech supports/ anchor fasteners etc as required 24G
280
-
206360
... More
IT Tower;Supply, installation, testing & commissioning of exhaust air diffuser with all required accessories 150x150 mm
106
-
28938
... More
IT Tower;Supply, installation, testing & commissioning of exhaust system for toilet: SISW Centrifugal fan for toilet exhaust with 50mm SPWG with weather proof casing with 2 and 5 Kw capacity of blower as per specification with all accessories complete of the following Capacities. 1500 CFM
3
-
73710
... More
IT Tower;Supply, installation, testing & commissioning of exhaust system for toilet: SISW Centrifugal fan for toilet exhaust with 50mm SPWG with weather proof casing with 2 and 5 Kw capacity of blower as per specification with all accessories complete of the following Capacities. 3450 CFM
1
-
49140
... More
IT Tower;GSS Tray type support covered with GI sheet on top for all exposed copper pipes running on terrace/balcony.
120
-
78600
... More
IT Tower;Supply, laying and commissioning of required size of Communication copper cable with 2 x 1.5 sq.mm and with including all accessories and including connecting.
3600
-
313200
... More
IT Tower;Supply, laying and commissioning of required size Power cable with 3 runs of 2x2.5 sq.mm +1x 1.5 sqmm for indoor units
2700
-
342900
... More
IT Tower;Supply &Fixing of PVC composit cover for all out door piping,the above Insulation should be factory laminated with PVC composite(P034 grade) in specified color which will act as a Uv resistant as well as mechanical resistant.
480
-
174720
... More
IT Tower;Supply, installation, testing and commissioning of initial Charge of refrigerant gas - R 410 A for all outdoor units as specified above and Pressure testing of the entrire system with Nitrogen and vaccumizing the nitrogen for all outdoor units as specified above.
1
-
579600
... More
IT Tower;Supply, installation, testing & commissioning of UPVC heavy duty drain pipe of various sizes as given below. The rate shall include Copper pipe and insulation with 6 mm Thick Nitrile rubber tube and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards.40 mm (ID)
780
-
180960
... More
IT Tower;Supply, installation, testing & commissioning of UPVC heavy duty drain pipe of various sizes as given below. The rate shall include Copper pipe and insulation with 6 mm Thick Nitrile rubber tube and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards.32 mm (ID)
1080
-
221400
... More
IT Tower;Supply, installation, testing & commissioning of UPVC heavy duty drain pipe of various sizes as given below. The rate shall include Copper pipe and insulation with 6 mm Thick Nitrile rubber tube and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards.25 mm (ID)
820
-
140220
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c41.28 mm dia.
270
-
529200
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c34.9 mm dia.
204
-
371688
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c28.58 mm dia.
140
-
194460
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c22.2 mm dia.
120
-
151800
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c19.05 mm dia.
780
-
866580
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c 15.8 mm dia.
280
-
226520
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c 12.7 mm dia.
180
-
100980
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c 9.52 mm dia.
612
-
270504
... More
IT Tower;Refrigerent Copper pipe and Thermal Insulation for copper pipe: Supply, installation, testing & commissioning of 16 SWG copper Refrigerant Piping of various sizes as given below. The rate shall include Copper pipe and insulation with 19 mm Thick Nitrile rubber tube (i.e. As per Unit Manufacturer recomendation) and necessary Installation accessories such as supports and clamps. The sizes given shall be verified by Supplier for adequacy and size based on manufacturer standards. Thermal Insulation for copper pipe Supply & Fixing of 19mm thick elastometric nitrile rubber insulation with fallowing specification Insulation material shall be Closed Cell Elastomeric Nitrile Butadiene Rubber. Density of Material shall be 40 to 60 Kg/m3 Thermal conductivity of elastomeric nitrile rubber shall not exceed 0.034 W/m°K at an average temperature of 20°C. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 6 and 7 ASTME84 and to meet the Class ?O? Fire category and should have passed fire test as per UL94 Water vapour permeability shall not exceed 1.9 x 10-11 g/m.s.Pa i.e. Moisture Diffusion Resistance Factor or ?µ? value shall be minimum 10000. Insulation should be certified for Fungai resistance as per ASTM G21-09. Insulation should have flame spread classification not more than 25 & smoke developed classification of not more than 50 as per ASTM E84-12c 6.4mm dia
84
-
34776
... More
IT Tower;Supply, installation, testing & commissioning of Required size/ quantity of Ref.net Joints & Multi kits for out door units as per the capacities.
24
-
127776
... More
IT Tower;Supply, installation, testing & commissioning of Required size/ quantity of Ref.net Joints & Multi kits for Indoor units
154
-
637560
... More
IT Tower;Supply, installation, testing & commissioning of Stand alone System controller with Display for controlling the indoor & outdoor units from a Remote place for all the circuits.
1
-
300000
... More
IT Tower;Supply of VRV/VRF -Hi Wall mounted type Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer 1.5 TR
6
-
131040
... More
IT Tower;Supply of VRV/VRF -Hi Wall mounted type Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer 1.0 TR
23
-
439530
... More
IT Tower;Supply of VRV/VRF - 2Way Casette Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer with capacity of 1.5 TR for Ante Rooms.2.0 TR
2
-
78260
... More
IT Tower;Supply of VRV/VRF - 4 Way Casette Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer. 4.0 TR
3
-
147600
... More
IT Tower;Supply of VRV/VRF - 4 Way Casette Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer.3.0 TR
45
-
1890000
... More
IT Tower;Supply of VRV/VRF - 4 Way Casette Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer. 2.5 TR
32
-
1267200
... More
IT Tower;Supply of VRV/VRF - 4 Way Casette Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer. 2.0 TR
41
-
1402200
... More
IT Tower;Supplying, installing, testing and commissioning of AHU Kits of required and suitable capacity(HP) connection with Electronics Expansion Valve controlled by EEV controller and accessories etc.
1
-
36000
... More
IT Tower;Supplying, installing, testing and commissioning of CSU (AHU Type) DUCTABLE type Indoor Units of the following actual capacities. The scope includes required Cordless Remotes supports with necessary Panels,bolts, screws&nuts etc, and necessary interconnections with Power supply/ earthing/ Refrigerant Connections Complete as required and as per drawing. The capacity of the Units shall be the nearest rating based on manufacturer CSU - 16TR/ 6400 CFM
1
-
218400
... More
IT Tower;Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations.20 HP
1
-
337500
... More
IT Tower;FOURTH FLOOR: Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations.18 HP
5
-
1458000
... More
IT Tower;THIRD FLOOR Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations. 20 HP
3
-
1012500
... More
IT Tower;THIRD FLOOR :Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations. 18 HP
3
-
874800
... More
IT Tower;SECOND FLOOR Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations. 20 HP
6
-
2025000
... More
IT Tower;FIRST FLOORSupplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations.20 HP
2
-
675000
... More
IT Tower;FIRST FLOOR Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations.18 HP
1
-
291600
... More
IT Tower;FIRST FLOOR Supplying, installing, testing and commissioning of VRV/VRF outdoor units of the following capacities. The scope includes making of suitable RCC pedestals, Channels, required installation accessories such as necessary bolts, screws & nuts,connecting kits etc, complete and necessary Interconnections of Power cables minimum 10 Rmt from Out door units panel, and earthing/ Refrigerant connections. The capacity of the Units shall be the nearest rating based on manufacturer. The Outdoor condensing unit comprising of Inverter compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System and in built starter. The starter unit shall be operated both from local and remote. The Refrigerant from the outdoor unit is distributed to the various indoor units thru a set of insulated refrigerant piping network, The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.System suitable for Cooling Mode only and for R-410a. Outdoor condensing unit comprising of filter driers, sight glass, liquid receivers, accumulators, Safety Devices, Oil Recovery System with complete charge of gas and recommended oil. The outdoor unit shall be fully capable of working in conjunction with multiple indoor units of various capacities as listed in this BOQ. Refrigerant Circuit shall include an accumulator, liquid and gas shut off valves, ball valves, distribution / refrigerant joints, control valves, and solenoid valves. Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. Refrigerant shuold be R410A and COP should be 3.5 minimum. The outdoor unit shall be mounted on VI pads to avoid vibrations. 16 HP
2
-
520200
... More
IT Tower;Supply and laying of 2 mm thick, 25 mm PVC Conduit with complete accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge Make:VIP / National / UNIVERSAL
5310
-
345150
... More
IT Tower;Supply and laying of Cat 6 UTP Cable with complete accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.Make: AMP / Digilink/ Equivalent
5310
-
228330
... More
IT Tower;Supply, Installation, Testing and Commissioning of 12 U Rack with all required accessories to mount Switches along with PDU and all necessary accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make: Cisco /HP/ Allied Telesis
3
-
49005
... More
IT Tower;Supply, Installation, Testing and commissioning of 42 Inch Display Monitor with Brackets and Accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make: Sony / LG / Samsung
2
-
105930
... More
IT Tower;Supply, Installation, Testing and Commissioning of in inside the Wall mount / Floored Rack, of Category 6 24 loaded Patch panel with support Manager ,as complete with all respects complying with relevant standard specification including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make: Cisco /HP/ Allied Telesis
3
-
60885
... More
IT Tower;Supply, Installation, Testing and Commissioning of 24 Port Network PoE Switch with 2 Nos of 10/100/1000 Mbps copper port with all required accessories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make: Cisco /HP/ Allied Telesis
3
-
115830
... More
IT Tower;Supply , installation, Testing and Commissioning of 6 TB Surveillance Hard Disk with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make: DELL, HP/
6
-
111378
... More
IT Tower;Supply, Installation, Testing and commissioning of 32 Channel NVR 32Ch Embedded Network Video Recorder with 4 HDD Bays Supports 4K Cameras, HDMI, VGA and ONVIFwith all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make :Norden/Axis / Honeywell / Pelco/Bosch
2
-
100684
... More
IT Tower;Supply, Installation, Testing and commissioning of IP Bullet Camera 2MP IR IP H.265 Compact Bullet camera with 4mm (Optional 6mm) Fixed Lens, POE and 30M IR support.UL Listed with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make :Norden/Axis / Honeywell / Pelco/Bosch
17
-
189346
... More
IT Tower;Supply, Installation, Testing and commissioning of IP Dome Camera 2MP IR IP H.265 Vandal Proof Compact Dome camera with 2.8mm (Optional 4mm) Fixed Lens, POE and 30M IR support.UL Listed with all necessary accesories including all material and labour charges for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge.Make: Norden/Axis / Honeywell / Pelco/Bosch
42
-
251580
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes h) 25mm dia
1650
-
620400
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes g) 32mm dia
300
-
147000
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes f) 40mm dia
230
-
143980
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes e) 50mm dia
200
-
148200
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes d) 65mm dia
240
-
221040
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes c) 80mm dia
160
-
196320
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes b) 100mm dia
165
-
310035
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes a) 150mm dia
20
-
58900
... More
IT Tower;Supply and fixing Flow Switches in MS pipe. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes : System Sensor / Switzer / NOTIFIER /HONEYWELL b) 100mm dia
1
-
5681
... More
IT Tower;Supply, fixing, testing and commissioning of 15mm size quartzoid bulb Quick response type sprinklers of rating 68ºC. Up right with required accessories. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes: SAFEX / HD / TYCO / VIKING / NEWAGE /
210
-
114450
... More
IT Tower;Supply, fixing, testing and commissioning of 15mm size quartzoid bulb Quick response type sprinklers of rating 68ºC. pendent / side wall with required accessories. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes: SAFEX / HD / TYCO / VIKING / NEWAGE /
757
-
412565
... More
IT Tower;Supply, Installation, Testing and Commissioning of Indoor / outdoor, weatherproof 3 phase 415V 4 wire Free Standing Floor mounted MV panel made out of 14 SWG CRCA sheet after seven tank process and painting with Epoxy powder coating including all switchgear as detailed below. The panel shall consist of suitable rating TPN Aluminium/Copper busbar (at the rating of 0.8A/Sq.mm/1.6A/sq.mm) supported with DMC/ SMC barriers and colour coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be mounted on channels grouted to the existing floor including all materials. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2 GI flats of adequate size to the main earth bus of 50x6mm GI flat. The size of all Panel Mounting Meters shall be 96X96mm.The Panels shall be mounted on U channels including supply and fixing of the same.All MCCBs shall have 80-100% thermal setting plug. system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification Makes of MCCBs : L&T / Siemens / Legrand / Schneider / ABB / Hager Makes of Meters : Schneider (Conzerve) / L&T / Elmeasure / Siemens INCOMING : 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A OUTGOING : ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) MAIN FIRE PUMP 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. JOCKEY PUMP 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller
1
-
287446
... More
IT Tower;Supplying, laying installation of end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Dowells/ Jainson d) 12 C x 2.5.sqmm copper control cable ( To Diesel driven pump)
30
-
6870
... More
IT Tower;Supplying, laying installation of end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Dowells/ Jainson c) 3.5 Core x 1.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.
30
-
6870
... More
IT Tower;Supplying, laying installation of end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Dowells/ Jainson b) 4C x 16sqmm AYFY cable ( for jockey pump & booster pumps)
30
-
6870
... More
IT Tower;Supplying, laying installation of end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive of all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Dowells/ Jainson a) 3.5C x 185.sqmm AYFY cable ( to main pump )
30
-
48270
... More
IT Tower;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Havells/Havells/KEI d) 12 C x 2.5.sqmm copper control cable ( To Diesel driven pump)
30
-
11610
... More
IT Tower;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Havells/Havells/KEI c) 3.5 Core x 1.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.
30
-
3000
... More
IT Tower;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Havells/Havells/KEI b) 4C x 16sqmm AYFY cable ( for jockey pump & booster pumps)
30
-
6090
... More
IT Tower;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Havells/Havells/KEI a) 3.5C x 185.sqmm AYFY cable ( to main pump )
30
-
35160
... More
IT Tower;Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.
100
-
8000
... More
IT Tower;Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.MAKE: HGURU / FIEBIG and Approved makes
3
-
2148
... More
IT Tower;Supply and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.
1
-
17042
... More
IT Tower;Supplying, installation testing and commissioning of G.M. Non-return valves 25mm dia conforming to IS 778 including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT
1
-
1126
... More
IT Tower;Supply, installation, testing and commissioning of 25mm dia Gate valve including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Zoloto / Leader / Approved makes
1
-
1250
... More
IT Tower;Supplying, installation testing and commissioning C.I. Non-return valve conforming to IS : 5312 with flanged ends (heavy) tested to 250 psi hydraulic pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open ands hut position as per fire practice etc complete. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT b) 80mm dia
1
-
13719
... More
IT Tower;Supplying, installation testing and commissioning C.I. Non-return valve conforming to IS : 5312 with flanged ends (heavy) tested to 250 psi hydraulic pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open ands hut position as per fire practice etc complete. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT a) 150mm dia
2
-
51772
... More
IT Tower;Supplying, installation testing and commissioning Cast Iron Body Sluice valve PN 1.6 Non-rising stem type conforming to IS:780, with flanged ends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Make:KIRLOSKAR / ZOLOTO / SANT b) 100mm dia
1
-
14770
... More
IT Tower;Supplying, installation testing and commissioning Cast Iron Body Sluice valve PN 1.6 Non-rising stem type conforming to IS:780, with flanged ends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Make:KIRLOSKAR / ZOLOTO / SANT a) 150mm dia
2
-
40902
... More
IT Tower;Supplying, installing,testing and commissioning of electrical motor driven Jockey pump of vertical / Horizantal multi stage inline centrifugal pump capable to deliver 180LPM at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation. The pump shall be coupled to motor of suitable HP with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and RCC foundation (as recommended by manufacturer), Foundation bolts etc.
1
-
86461
... More
IT Tower;Supplying, installing, testing and commissioning of electrical motor driven Main (Hydrant & Sprinkler) Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel, foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor of suitable HP with speed of 2900 RPM, suitable Electric supply and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and RCC foundation (as recommended by manufacturer), Foundation bolts etc.
1
-
394244
... More
IT Tower;Supplying, installing, testing and commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280 LPM at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (for 6hrs. Operation, capacity as per TAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation with diesel engine control diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine with required pipes / valves / fittings etc., as per TAC including all associated electrical works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall coupled to Diesel engine, radiator water cooled type with speed of 1800 / 2150 RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, Fuel tank with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping (if required) coupling gaurd and other standard accessories and RCC foundation (as recommended by manufacturer), foundation bolts, etc. complete. (the cost for interlock arrangement between main and diesel engine pumps to be included in this item price)
1
-
685098
... More
IT Tower;Supplying , installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 35 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325, c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads Makes of Pumps : Kirloskar / Mather&Platt.Makes of Motors : Siemens / ABB / Kirloskar/Mather&Platt
1
-
69305
... More
IT Tower;Supplying, installing and commissioning of fire brigade inlet inlet connection of 2 way with 2 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia. Pipe manifold and connected to wet riser main as well as to Fire water tank. Quoted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable size with mounting supports etc. complete.
1
-
6817
... More
IT Tower;Supplying, installing and commissioning of fire brigade inlet inlet connection of 4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 150 mm dia. Pipe manifold and connected to wet riser main as well as to Fire water tank. Quoted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable size with mounting supports etc. complete.
1
-
13634
... More
IT Tower;Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve for finished item of work as per the instructions of engineer in charge.Make:RB / TBS / VB
3
-
3987
... More
IT Tower;Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve. c) 80mm dia
1
-
4601
... More
IT Tower;Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve. b) 100mm dia
3
-
15168
... More
IT Tower;Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve. a) 150mm dia
5
-
32380
... More
IT Tower;Providing, installation, testing and commissioning of dual plate non - return valve of 100mm dia size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
1
-
9487
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes h) 25mm dia
6
-
2256
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes g) 32mm dia
6
-
2940
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes f) 40mm dia
6
-
3756
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes e) 50mm dia
6
-
4446
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes d) 65mm dia
6
-
5526
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes c) 80mm dia
6
-
7362
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes b) 100mm dia
75
-
140925
... More
IT Tower;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes a) 150mm dia
250
-
736250
... More
IT Tower;Supply, installation, testing and commissioning of 25mm dia Ball valve.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes : Zoloto / Leader / Approved makes
2
-
1386
... More
IT Tower;Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Make: Eversafe/ Reliance/ Newage/ SRI, b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Safex.c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge
15
-
114180
... More
IT Tower;Supplying , fixing and testing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gunmetal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required for finished item of work as per the instructions of engineer in charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
19
-
47500
... More
IT Tower;Supplying , fixing and testing of 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required for finished item of work as per the instructions of engineer in charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make: Mini Max / Safex / Newage / Winco / Padmini.
38
-
243086
... More
IT Tower;Supplying , fixing and testing of of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to branch pipe, mounted on wall OR raised brick platform accommodate 2 Nos 15 mtr long Hose pipe, 1 No and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required for finished item of work as per the instructions of engineer in charge. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make: Mini Max / Safex / Newage / Winco / Padmini.
19
-
61522
... More
IT Tower;Supplying and fixing single headed Internal/External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required including accessories such as Flange, Nuts, Bolts, Washers, Gasket, suitable bends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make: Mini Max / Safex / Newage / Winco / Padmini.
19
-
198550
... More
IT Tower;Supply & Fixing of Water CO2 type fire extinguisher 9 lts. Capacity, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, initial filling in brand new cylinder of powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge & wall mounting bracket / stand etc. complete confirming to IS:15683. Discharge time minimum 13 Secs, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes : Cease Fire / Minimax
15
-
54000
... More
IT Tower;Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes : Cease Fire / Minimax
40
-
440840
... More
IT Tower;Supply installation testing and commissioning of ABC type Fire Extinguisher of 6kg, fitted with discharge control valve ( squeeze grip type ) , inside STORED PRESSURE with ISI mark, with discharge hase and open nozzel overall conforming to IS: 15683 with ISI mark along with wall bracket and initial refilling at site . Fire Rating 2A. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-ChargeMakes : Cease Fire / Minimax
18
-
130878
... More
IT Tower;Supply Installation testing and commissioning of 4 MIC with all accessories.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge
1
-
6817
... More
IT Tower;Supply installation testing and commissioning of amplifier with inbuilt 240watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-ChargeMake:Honeywell/Bosh/Phillips
1
-
28404
... More
IT Tower;Supply, Installation, testing and commissioning shielded twin twisted pair 1.0 sqmm cable in existing conduit ( Shall be on actuals ).The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make:Polycab/RR Kabel/Havells
500
-
26000
... More
IT Tower;Supply and installation testing and commissioning of 6Watt 180mm dia ceiling mounted mounted white color speakers (along with junction boxes to be used in no false ceiling area).The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Honeywell/Bosh/Phillips
15
-
20445
... More
IT Tower;Supply and Installation of Intalligent analogue addressable monitor modules including the cost of mounting accessories complete as per specifications and as required and as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
5
-
16195
... More
IT Tower;Supply and laying of 2 Core x 1.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make-Polycab/Havells
2000
-
160000
... More
IT Tower;Supply and Installation of Intalligent analogue addressable Control Modules including the cost of mounting accessories complete as per specifications and as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
5
-
17160
... More
IT Tower;Supply and Installation of Intalligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
13
-
45461
... More
IT Tower;Supply and fixing of Exit Light fixtures with 1.5hrs battery backup, Escape signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton of Cease Fire or its equivalent make Model- 1ES01. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge
2
-
2636
... More
IT Tower;Supply, Installation, testing and commissioning of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
18
-
73890
... More
IT Tower;Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
18
-
77022
... More
IT Tower;Supply and installation of intalligent analogue addressable multi criterion Rate of rise Heat detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes: Notifier / Edwards
8
-
32448
... More
IT Tower;Supply and installation of intalligent analogue addressable multi criterion smoke detectors below false ceiling/on ceiling including the cost of base plate. 75mm dia MS outlet box for fixing of the detector base, mounting accessories etc., complete as per specifications and as required. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-ChargeMakes: Notifier / Edwards
235
-
780670
... More
IT Tower;Supply, Installation, testing and commissioning of UL Listed 3 loop micro processor based analog addressable fire control panel expandable by minimum 2 additional loops with minimum 160 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as per the specification and as required for fixing of above Micro processor based Fire Alarm control panel with zonal indictions and battery back up as per detailed specifications.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-ChargeMakes: Notifier / Edwards / Honeywell / Morley IAS /Bosch / Honeywell / Morley IAS / Bosch/ Morley IAS
1
-
204507
... More
IT Tower;Supply , installation , testing and commissioning of BULK HEAD 12 W 5700K Pressure die cast Aluminium Housing. Uniquely designed PDC Aluminium End Cap. UV Stabilised PC Diffuser.Nano Technology based Powder coated. Isolated High Effciency Driver.System Efficacy> 100 LPW. THD<5%, CRI>80, IP66 Protection.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT CASK / Wipro / Havells / Philips / Bajaj
12
-
60852
... More
IT Tower;Supply , installation , testing and commissioning of 30 W IP 66 SURFACE MOUNTED LUMINIARE . Pressure die cast aAluminium Housing . PDC Aluminium Center cover which facilitates bottom maintanace. UV Stabilised Injection moulded PC Diffuser Cover. Nano Technology based powder coated. Isolated driver with inbuilt surge protection upto 4 KV. System Efficacy of 100LPW.THD<5%. 5 Years Warranty. IP66 protection. To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT Parker / Wipro / Havells / Philips / Bajaj
108
-
651564
... More
IT Tower;Supply , installation , testing and commissioning of 66 W 4000K Linear Pendant Lumianre 2400mm Length, 25 mm Height, 112 mm width. Direct indirect lighting of 70 % Up & 30 % Down. Micro prismatic diffuser for down component for Low UGR<16. PMMA Lens on top for batwing kind of distribution on the top. Remote driver with innbuilt 3 kVA Surge protection and 6 KV addition surge protection devise. PDC End caps. THD<5%, CRI>80. IP 20. To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT Ilean / Wipro / Havells / Philips / Bajaj
1
-
16518
... More
IT Tower;Supply , installation , testing and commissioning of 28 W 4000 K Pendant liner 1200mm fixture with 360 degree light distribution. Metal End caps extruded Al Body. High effciency Driver with Safety protecions like overvoltage, mis wiring etc. To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT LIGHT TUBE / Wipro / Havells / Philips / Bajaj
12
-
318720
... More
IT Tower;Supply , installation , testing and commissioning of 36W 4000 K circular ring shaped architecural luminaire pendant munted application. Body made of rolled Alumimum profile . Smooth opal PC diffused cover . BLACK Powder coated using Nano technolgy. 600mm DIA CRI>80.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT CIRCLE DN / Wipro / Havells / Philips / Bajaj
10
-
253570
... More
IT Tower;Supply , installation , testing and commissioning of 36W 4000 K Hexagon shaped architecural luminaire pendant munted application. Body made of rolled Alumimum profile . Smooth opal PC diffused cover . BLACK Powder coated using Nano technolgy. 600mm each side CRI>80. To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT HEXOGON DN / Wipro / Havells / Philips / Bajaj
6
-
226320
... More
IT Tower;Supply , installation , testing and commissioning of 30 W 4000 K LED Pendant Mounted Decorative Luminare with Pressure Die cast Aluminiaum Housing with BALCK Finish. Diffuser made of PC Material for optimal Light transmission. High Efficency intgral Driver THD<5% CRI>80. IP 20. To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT DISCUS
49
-
1771644
... More
IT Tower;Supply , installation , testing and commissioning of 12 W 4000K LED Pendant Mounted Decorative Light fixture with Simple shape made of Spun Aluminium. Comes with Standerd E27 Lamps. Reflects lights from white acrylic diffuser for smoothing Light Distribution. Superiour sandy black powder coating finish using Nano Technolgy CRI>80.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT ELIP Mini / Wipro / Havells / Philips / Bajaj
20
-
328440
... More
IT Tower;Supply , installation , testing and commissioning of40 W 4000K P pendant Mounted fixture with PDC Aluminium Alloy Housing . Nano Technology based Black Powder coated. UV Stabilised Injection moulded Poly carbonate Diffused cover allows good Optical Light Transmission & Spread. High efficient silicon encapsulated Isolated Driver with safety protections . Luminaire efficancy >105 LPW. THD<5% CRI>70.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT SOL / Wipro / Havells / Philips / Bajaj
14
-
460068
... More
IT Tower;Supply , installation , testing and commissioning of 30 W 4000 K Pendant Mounted Unique Designed susupended decorative Light Creating exemplary illumination and High Efficient optical Output. Housing made of Pressure die cast aluminium. Corrosion resustant nano technology based powder coating . Vacuum formed PC Diffuser cover. HIgh effciency driver with safety protections THD<5% CRI >80 IP20 . Dia 400mm .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by tthe Department officials and architect.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT POLO MAX / Wipro / Havells / Philips / Bajaj
30
-
338640
... More
IT Tower;Supply , installation , testing and commissioning of 18W LED 4ft length Pendant Linear, Integral Luminaire with Electronic driver. , Extruded Aluminum alloy housing for better thermal conductivity. Extruded PMMA Microprismatic diffuser for minimise the Glare . UGR< 17. White Powder coated using Nano technology for longer durability.4000K CCT. CRI>80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.95 PF. <5% THD. Driver should be accesable from top without disturbing the continous formation. Pendant mount Direct Application with Provision should be there inside the luminaire to join consecutive luminaires seamlessly without any light leakage & dark patch . LED life of 50000 Hrs @ L70 & 3 step MacAdam Binning. IP20Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT CANE G5 Prismatic / Wipro / Havells / Philips / Bajaj
43
-
332218
... More
IT Tower;Supply , installation , testing and commissioning of 36W LED 8ft length Pendant Linear, Integral Luminaire with Electronic driver. , Extruded Aluminum alloy housing for better thermal conductivity. Extruded PMMA Microprismatic diffuser for minimise the Glare . UGR< 17. White Powder coated using Nano technology for longer durability.4000K CCT. CRI>80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.95 PF. <5% THD. Driver should be accesable from top without disturbing the continous formation. Pendant mount Direct Application with Provision should be there inside the luminaire to join consecutive luminaires seamlessly without any light leakage & dark patch . LED life of 50000 Hrs @ L70 & 3 step MacAdam Binning. IP20Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Smilar to LT CANE G5 PRISMATIC / Wipro / Havells / Philips / Bajaj
70
-
1005830
... More
IT Tower;Supply , installation , testing and commissioning of 30 W LED COB Based surface Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Anodised Aluminium deep recessed reflector for glare free Light. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 105mm and Overall dia of 120mm. LED life of 50000 Hrs @ L70. IP65 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj
14
-
82768
... More
IT Tower;Supply , installation , testing and commissioning of 18 W LED COB Based surface Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Anodised Aluminium deep recessed reflector for glare free Light. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 105mm and Overall dia of 120mm. LED life of 50000 Hrs @ L70. IP65 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj SURFACE
20
-
98540
... More
IT Tower;Supply , installation , testing and commissioning of 18 W IP 65 LED COB Based surface Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Anodised Aluminium deep recessed reflector for glare free Light. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 105mm and Overall dia of 120mm. LED life of 50000 Hrs @ L70. IP65 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj IP
18
-
101844
... More
IT Tower;Supply , installation , testing and commissioning of 7 W 24 Degree Beam angle LED COB Based recessed Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Anodised Aluminium deep recessed reflector for glare free Light. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 70mm and Overall dia of 85mm. LED life of 50000 Hrs @ L70. IP20 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj MIN
87
-
214455
... More
IT Tower;Supply , installation , testing and commissioning of 10 W 60 Degree Beam angle LED COB Based recessed Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Anodised Aluminium deep recessed reflector for glare free Light. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 70mm and Overall dia of 85mm. LED life of 50000 Hrs @ L70. IP20 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect.The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj MIN
70
-
164220
... More
IT Tower;Supply , installation , testing and commissioning of 18W LED Deep recessed Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. PMMA diffuser for optimum light transmission. 4000K CCT. CRI> 80.High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 112mm and Overall dia of 126mm. LED life of 50000 Hrs @ L70. IP20 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT INTNESO
350
-
889350
... More
IT Tower;Supply , installation , testing and commissioning of 10W LED Deep recessed Downlight. Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. PMMA diffuser for optimum light transmission. 4000K CCT. CRI> 80. High efficiency driver with inbuilt surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Cut out dia of 112mm and Overall dia of 126mm. LED life of 50000 Hrs @ L70. IP20 Protection. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Similar to LT INTENSO / Wipro / Havells / Philips / Bajaj
40
-
78200
... More
IT Tower;Supply , installation , testing and commissioning of 36 W 4000K Recess Mounted 2X 2 Luminaire. 3960 Lumens , Housing Made of Premium grade sheet metal. Thermoformed PMMA Diamound shaped Diffuser for optimum Light transmission. Uniform light distribution with UGR<19. Nano technology based White mat finish powder coating for the housing. High efficiancy electrically Isolated driver with inbult surge protection upto 3KVA. fixture shoud come with Additional Surge protective device upto 6 KVA. LED Chip with 3 step MacAdam Binning. Life of the LED should be 50000 Burning hours @ L70 standerd. THD<5%. . Luminaire System effciiancy >110LPW. IP 20. Dimensions 575mmX575mmX110mm .To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. The cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Similar to LT LUMINOX / Wipro / Havells / Philips / Bajaj
40
-
201200
... More
IT Tower;Supply , installation , testing and commissioning of 24 W 4000K Recess Mounted 2X 2 Luminaire. 2640 Lumens , Housing Made of Premium grade sheet metal. Thermoformed PMMA Diamound shaped Diffuser for optimum Light transmission. Uniform light distribution with UGR<19. Nano technology based White mat finish powder coating for the housing. High efficiancy electrically Isolated driver with inbult surge protection upto 3KVA. fixture shoud come with Additional Surge protective device upto 6 KVA. LED Chip with 3 step MacAdam Binning. Life of the LED should be 50000 Burning hours @ L70 standerd. THD<5%. . Luminaire System effciiancy >110LPW. IP 20. Dimensions 575mmX575mmX110mm.To achieve the Design intent, all the particulars of the specifications to be met in toto and post confirmation of catalogues, suppliers to physically display samples of exactly same item on mock up and approved by the Department officials and architect. the cost including all incidental and operational charges, labour charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge Similar to LT LUMINOX / Wipro / Havells / Philips / Bajaj
245
-
1232350
... More
IT Tower;Supply of OM4 50/125 LC-LC patch card of 3 Mtr length. (Makes:D Link / AMP / Molex/Legrand), the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
10
-
28550
... More
IT Tower;Supply & installation of OM4 Multi mode Pigtails for fibre core connectivity. (Makes:D Link / AMP / Molex/Legrand), the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
168
-
35280
... More
IT Tower;Supply and installation of OM4 50/125 24 LC Duplex fibre distribution unit. (FDU / LIU) loaded with couplers etc complete. (Makes:D Link / AMP / Molex/Legrand), the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
55660
... More
IT Tower;Supply and installation of OM4 50/125 12 LC Duplex fibre distribution unit. (FDU / LIU) loaded with couplers etc complete. Makes : (Makes:D Link / AMP / Molex/Legrand).., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
32478
... More
IT Tower;Supply and Laying of OM4 50/125 6 core multimode fiber cable armoured Indoor/outdoor OFC cable with all necessary fitting including labour charges for laying etc., complete. (Makes:D Link / AMP / Molex/Legrand).., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
300
-
59400
... More
IT Tower;Supply of 42U Closed network rack 800x1000 with power spike including all accessories.., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Netrack
5
-
326315
... More
IT Tower;Supply of 7 feet length moulded patch cord. (Makes:D Link / AMP / Molex/Legrand)., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2724
-
819924
... More
IT Tower;Supply & installation of 24 Port Patch Panel including labour charges for fixing and giving connections etc., complete.(Makes:D Link / AMP / Molex/Legrand)., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
56
-
434448
... More
IT Tower;Supply and Fixing of approved make of plug Cat6 - in type LAN RJ-45 socket outlet with G.I outlet box and cover plate complete as required in 3 module plate including cost and conveyance of all materials and labour charges commissioning of CAT 6 including testing and giving report to each point etc complete(Makes:D Link / AMP / Molex/Legrand))., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1362
-
668742
... More
IT Tower;Supply and laying of Cat 6 LAN cable in the existing PVC/MS conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete. (Makes:D Link / AMP / Molex/Legrand) ., the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
78840
-
1971000
... More
IT Tower;Supply and installation of 1 No. 10 Passenger Machine room less elevator Elevator Type Passenger Elevator PWI10/10-19 Product I onospace No of Units Load & Capacity 680 kg or 10 persons Speed 1 m/s Stops & Openings 5 stops & 5 openings, Single entrance car Travel height 14.4 m Elevator Grouping Simplex Full collective Well Dimension 2000 mm width and 2000 mm depth (required) Head Room height, 4200 mm (required) Pit Height 1500 mm (required) MAP Floor Position Topmost floor Car dimensions 1200 mm wide x 1400 mm deep x 2200 mm high Door dimensions 800 mm wide x 2000 mm internal height Door type Two-panel Centre Opening Panel 4 Car design [TYP_CAR_DESIGN_SOLUTION (IMNSS21)] Car Panel Finish Stainless steel Hairline AISI441 Handrail Round Bend Handrail Stainless Steel at Rear Wall Ceiling & Lighting [TYP_CAR_CEILING(RL97F)] Stainless Steel Square Spot Light LED Flooring 20 mm Granite Stone by Customer, Car skirting material: Stainless steel Hairline AISI441 Car Door Finish Stainless steel Hairline AISI441, Floors 1-5 , Floor mark G, 1, 2, 3, 4, Interfloor distance 3600 mm, Landing door material Stainless steel AISI441, Car operating panel 1 Full Height Dark grey brushed StSt tempering glass Segmented LCD display Round flush mounted KDS96 , Landing Signalization Tempered glass Segmented LCD display Flush Mounted Tempered glass Round flush mounted KDS96, Standard Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door, Additional Emergency Rescue Device with audio announcer Three way intercom Nudging service Attendant Service Lift Announcer Square Spot Light LED. The cost includes conveyance of all materials to site, all opertaional and incidental charges, all labour charges, overheads & contractors profit etc., all taxes, except GST, complete for finished item of work and the work has to be carried out as per the instructions of Department Engineer in Charge. Make:Kone / Schindler / Mitsibuishi
3
-
5890500
... More
IT Tower;Emergency Power supply : Supply, Transportation and installation of15kva on line UPS system IGBT based rectifier with input power factor correction 32 bit microprocessor based with isolation transformers double conversion, SNMP controls, LCD display, Pure sine wave out put, with auto static switch three phase input / Three phase output and modular structure for better thermal technology / cooling facility, along with battery rack, batteries for back up time upto 30 mins with warranty up to three years along with all other necessary accessories to complete the job in all respect as directed by Engineer in Charge . Makes: Socomec / Emerson.
1
-
375000
... More
IT Tower;Supply and installation testing and commissioning of 1nos 60KVA UPS (Masterys GP4 60 KVA (3:3) UPS) IGBT Based rectifier and Inverter with 3 Level technology, Builtin Phase reversla protection at the input, Common battery provision, CE Marked, Manufactured with RoHS Compliance, Back feed Detection, Paralleing facility upto 6 Nos, Amarraja Quanta VRLA batteries 12V/75AH - 42 No's for 20 Min backup. Battery Breaker, PRS Kit, Racks, Inter cell connectors, DC cable to the maximum length of 10 Mtrs, along with all other necessary accessories to complete the job in all respect as directed by Engineer in Charge . (Make - Socomec/ Emerson)
1
-
758400
... More
IT Tower;Supply and installation testing and commissioning of 100KVA UPS (Masterys GP4 100 KVA (3:3) UPS) with parallel operation,IGBT Based rectifier and Inverter with 3 Level technology, Builtin Phase reversla protection at the input, Common battery provision, CE Marked, Manufactured with RoHS Compliance, Back feed Detection, Paralleing facility upto 6 Nos, Amarraja Quanta VRLA batteries 12V/100AH - 44 No's for 15 Min backup. Battery Breaker, PRS Kit, Racks, Inter cell connectors, DC cable to the maximum length of 10 Mtrs, along with all other necessary accessories to complete the job in all respect as directed by Engineer in Charge (Make - Socomec/ Emerson)
2
-
2403200
... More
IT Tower;Supply of erection of 12" (300mm) Light duty exhaust fan with wire guard etc complete Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air.
1
-
2405
... More
IT Tower;Supply and transportation of 10W LED Bulk head fitting with milky diffuser heat sink integrated with housing with all accessories etc complete with 5 years warranty LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / Keselec / Fortune Art / HALONIX / HAVELLS / HPL / SYSKA / SURYA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
12
-
21132
... More
IT Tower;Supply and Transportation of 40w suspended light equivalent to philips cat no. PT520T LED49S/830 PSU MB BELL CL along with all required accessories complete. LUMINAIRE MAKE : Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
5784
... More
IT Tower;Supply and Transportation of 30w/40w Linear hanging LED luminaire Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% with non integrated driver etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
5216
... More
IT Tower;Supply and Transportation of 40w Edge lit, Recessed / Surface 2' x2' (600mm x 600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% with non integrated driver etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
4648
... More
IT Tower;Supply and transportation of 18-20W, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IBLED / Panasonic / Halonix / HPL / Syska /Eveready / Surya / Keselec/ FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
833
... More
IT Tower;Supply and transportation of18w back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
2063
... More
IT Tower;Supply and transportation of15w back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
1803
... More
IT Tower;Supply and Fixing of 8 Way SPNDB with IP 43 Protection arrangement with 40 Amps 4P MCB with 40A 4P RCCB as for lift Power complete with cost including all taxes,transportation and labour charges etc., complete.Makes:Legrand / Schneider.
18
-
154026
... More
IT Tower;Supply and Fixing of 8 Way VTPNDB with IP 43 Protection arrangement with 125 Amps 4P MCCB was Incomer and 8 Nos of 40A-63A, TP MCB as out goers for Power distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes: Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
3
-
83448
... More
IT Tower;Supply and Fixing of 8 Way Horizontal TPNDB with IP 43 Protection arrangement with 63 Amps 4P MCB with 63A 4P RCCB as Incomer and 24 Nos of 6-32A, SP MCB as out goers for Lighting distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora.
12
-
226284
... More
IT Tower;Supply and Fixing of 6 Way Horizontal TPNDB with IP 43 Protection arrangement with 63Amps 4P MCB with 63A 4P RCCB as Incomer and 18 Nos of 6-32A, SP MCB as out goers for Lighting distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
18
-
270972
... More
IT Tower;Supply and Fixing of 4 Way Horizontal TPNDB with IP 43 Protection arrangement with 40 Amps 4P MCB with 40A 4P RCCB as Incomer and 12 Nos of 6-32A, SP MCB as out goers for Lighting distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
2
-
26674
... More
IT Tower;Supply and Fixing of 4 Way VTPNDB with IP 43 Protection arrangement with 40 Amps 4P MCB was Incomer and 2 Nos of 20A, TP MCB & 6 NOS 20A sp as out goers for Power distribution complete with cost of including all taxes,transportation and labour charges etc., complete.Makes:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora.
3
-
44208
... More
IT Tower;Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 A, ?C? curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.Make:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
20
-
85820
... More
IT Tower;Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 63 A, ?C? curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.Make:Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
30
-
115770
... More
IT Tower;Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora
10
-
19310
... More
IT Tower;Supply and laying of 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) P.V.C. insulated FRLS.insulated 1100V grade as per IS:694/1990 flexible copper cable (ISI MARK) in existing pipe with 1no 16A switch and 3nos 6A 2 in one socket Modular type and with Switch control and GI boxes with cover plate fixing on separate boardincluding all taxes,transportation and labour charges etc., complete. MAKES OF WIRES: Havells /RR kabel, Makes of switches: Legrand Arteor / Schneider Zen celo
847
-
1293369
... More
IT Tower;Supply and fixing 1 no. of 6/16A (3/5 pin) socket (Universal Type) with 1 no of 16A modular switch control mounted on GI box covered with modular cover plate including cost and conveyance of all materials including all taxes,transportation and labour charges etc for erection of ups points Makes of switches: Legrand Arteor / Schneider Zen celo.
146
-
100156
... More
IT Tower;Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on common board including all taxes,transportation and labour charges.Makes of switches: Legrand Arteor / Schneider Zen celo
148
-
81696
... More
IT Tower;Supply and laying of 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) P.V.C. insulated FRLS.insulated 1100V grade as per IS:694/1990 flexible copper cable (ISI MARK) in existing pipe with 6A switch and 6A 2 in one socket Modular type and with Switch control and GI boxes with cover plate fixing on separate boardincluding all taxes,transportation and labour charges etc., complete. MAKES OF WIRES: Havells /RR kabel, Makes of switches: Legrand Arteor / Schneider Zen celo
10
-
8640
... More
IT Tower;Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on common board including all taxes,transportation and labour charges.Makes of switches: Legrand Arteor / Schneider Zen celo
5
-
5305
... More
IT Tower;Supply and run of 3 runs (phases, neutral & Earth) of 84/0.3mm (6.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point including all taxes,transportation and labour charges etc.,MakeMakes : Havells / RR kabel / KEI (HFFR) / Polycab ((HR_FR-LF)
10
-
2440
... More
IT Tower;Supply and run of 3 runs (phase, neutral & Earth) of 56/0.3mm (4.0 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for power point including all taxes,transportation and labour charges etc., for 16A sockets. Makes : Havells / RR kabel / KEI (HFFR) / Polycab ((HR_FR-LF)
500
-
87000
... More
IT Tower;Supply,Laying of 3core, 4sq.mm 1.1kV FRLS, PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all taxes,transportation and labour charges etc., for UPS/ Raw power sockets in existing Raceways. Make:Havells / RR kabel / Polycab / RPG / KEI / Gloster
1980
-
338580
... More
IT Tower;Supply and run of 3 runs (phase, neutral & Earth) of 36/0.3mm (2.5 sq.mm) FRLS, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for circuits including all taxes,transportation and labour charges etc., complete.Makes : Havells / RR kabel / KEI (HFFR) / Polycab ((HR_FR-LF)
2258
-
291282
... More
IT Tower;Supply,Laying of 3core, 2.5sq.mm 1.1kV FRLS, PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all taxes,transportation and labour charges etc., for UPS/ Raw power sockets in existing Raceways. Make:Havells / RR kabel / Polycab / RPG / KEI / Gloster
24900
-
3261900
... More
IT Tower;Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but including modular plate etc. as required. Makes of switches: Legrand Arteor / Schneider Zen celo.
1
-
626
... More
IT Tower;Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 2-WAY 6A modular switch, 3-pin Ceiling rose/BH/SBH Modular switches with cover plate and GI deep box including all labour charges etc.,complete for 2-WAY LIGHT POINTS like stair case points including all taxes,transportation and labour charges MAKES OF WIRES: (Fnolex/RR Kables) Makes of switches: Legrand Arteor / Schneider Zen celo.
24
-
33792
... More
IT Tower;Four point controlled by one 6A Switch
70
-
133770
... More
IT Tower;Three point controlled by one 6A Switch
120
-
187800
... More
IT Tower;Two point controlled by one 6A Switch
150
-
186150
... More
IT Tower;Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. insulated flexible copper cable, 1100V grade (ISI MARK) in existing pipe with following 10A modular type switch control with front plate, GI Deep box , 3-pin Ceiling rose/BH/SBH, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including all taxes,transportation and labour charges.MAKES OF WIRES: Havells / RR kabel / RPG / KEI / Gloster ) Makes of switches: Legrand Arteor / Schneider Zen celo
189
-
177471
... More
IT Tower;Supply and Fixing of 32mm dia heavy grade,2.1 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Run of mains, light, fan points, power points.Make:(Sudhakar ISI/Modi/Atul)
2000
-
230000
... More
IT Tower;Supply and Fixing of 25mm dia heavy grade,2.2 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Run of mains, light, fan points, power points.. Make:Sudhakar ISI/Modi/Atul)
5645
-
587080
... More
IT Tower;Supply and Fixing of 20mm dia heavy grade,2.1mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes, transportation and labour charges etc., complete. for Telephone, LAN, PA,CCTV, other services. Make:Sudhakar ISI/Modi/Atul)
2258
-
214510
... More
IT Tower;Supply and fixing of First Aid Box with Medicines complete and three years expiry date tobe fixed in Electrical Control room and Engineering Department.
2
-
2834
... More
IT Tower;Supply and fixing of Shock Treatment Charts duly laminated along with saperate colour single line diagram laminated, tobe fixed in Electrical Control Panel room.
2
-
1030
... More
IT Tower;Supply and handing over 11kV Tested Rubber hand glouses tobe used on LT supply with Test certificate.
2
-
530
... More
IT Tower;Supply and fixing of Co2 Fire Extinguisher with mounting clamps with pressure test certificate of 4.5 kgs capacity.
2
-
22042
... More
IT Tower;Supply and fixing of Fire buckets with Angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate and IS standards.
2
-
5164
... More
IT Tower;Supply & Installation Rubber Mats 12mm thick of size 1000mm x 2000 mm x 12mm thick Electrcial tested with test certificate.
6
-
16800
... More
IT Tower;Excavation of cable trench of size 1000mmx1000mm depth in wet and dry conditions of soil for cable laying route as mentioned in drawings OR as per instuctions of site engineer, while excavation wherever water is found the same has to be bailed out, stocking of removed earth from all along the trench to be stocked on either side of the trench and once the job of cable laying as per specifications details the soil has to be filled in the trench and water compaction to be done, any excess soil shall be disposed off after discussing with the client or site engineer instructions.
300
-
105300
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 8 Guage G.I Wire
1000
-
24000
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 8 Guage Copper Wire
300
-
32400
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 25 mm x 6 mm G.I Strip
3000
-
396000
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 25 mm x 6 mm Copper Strip
350
-
292600
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 50 mm x 6 mm G.I Strip
1000
-
240000
... More
IT Tower;Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including,revitting,soldering,saddles,nuts bolts,boltings making connection etc as required . Also the following strips are to be used for earth mat as per IS standard and site requirement 50 mm x 6 mm Copper Strip
500
-
819500
... More
IT Tower;Supply and laying of Copper/ Brass/Bronze flat bar 10x32x300mm mounted on two DMC Insulators (such as acro type 4649) holes of 8mm dia to accommodate 1/4" connection bolts with washers and butterfly nuts all made of brass or copper (Location: Elec room/ Every floor).,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
200
-
79000
... More
IT Tower;Supply, Installation, Testing & Commisioning of Cu tape welded Earth mat of overall dimensions 3000 mm x3000 mm with cross conductors of CU -Size 50 x 6 mm welded securely at 150 mm x 150 mm grid sizing comprising 6 Nos 600mm x600 mm heavy duty Cast iron chamber complete with termination arrangement, watering funnel etc. The cost shall include excavation of earth for laying mat, driving of earth electrode, laying of earthmat bar/strip including cutting, shaping & binding etc. along with welding of riser strip with earth mat and structure body.
1
-
210000
... More
IT Tower;Supply, Installation, Testing & Commisioning of GI tape welded Earth mat of overall dimensions 3000 mm x3000 mm with cross conductors of GI -Size 75 x 10 mm welded securely at 150 mm x 150 mm grid sizing comprising 6 Nos 600mm x600 mm heavy duty Cast iron chamber complete with termination arrangement, watering funnel etc. The cost shall include excavation of earth for laying mat, driving of earth electrode, laying of earthmat bar/strip including cutting, shaping & binding etc. along with welding of riser strip with earth mat and structure body.
3
-
255000
... More
IT Tower;Supply, installation, testing and commissioning of maintenance free chemical earthing with 10 feet rod, 26-50mm dia, 2mm thick electrolytic grade Cu. Tube filled with chemicals and sealed at both ends and. Tube shall have leaching ports at bottom and 3 vent holes at the top end, lead conductor welded to tube, with back fill and poly plastic pit cover heavy duty type and complete in all respects. (The installation procedures should be followed as instructed by the Earth Electrode supplier). The product should meet the requirements as per IS: 3043 or any equivalent international specification. Chemicals used shall be environmental friendly. completely as per IS 3043,1987 or latest revision. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
252765
... More
IT Tower;Supply, laying and fixing of independent earthing for grounding of sofisticated equipments such as Transformer , UPS , DG neutrals other sophasiticated equipments with 600x600x4mm copper plate and with 40mm dia 'B'class GI pipe,2.5 mtr long providing GI funnels covered with mesh enclosed in CC chamber of size 600x600x600mm with suitable rainforce cover RCC slab with lifting arrangement cover painted and earthing details stencilled on cover with paint. The GI pipe shall be provided with staggered holes of 16 No of 12mm dia. The earth electrode shall be filled with Charcoal, Salt, Sand and Bentonite Powder 10kgs around 150mm from the bottom of the pipe to the bottom of CC chamber giving each connections with Cu strip of 25x3 mm with providing suitable size 14 No holes with GI washers, nutbolts GI, compete with all required materials cost and labour charges, the earthing shall conform to IS 3043.
14
-
210434
... More
IT Tower;Supply, laying and fixing of independent earthing for grounding of single pole structure, ct/pt unit, HT Breaker,Transformer body, DG set body , LT kiosk, MPCC and LV panels with 40mm dia 'B'class GI pipe, 2.5 metre long providing GI funnels covered with mesh enclosed in CC chamber of size 600x600x600mm with suitable rainforced RCC slab with lifting arrangement cover painted and earthing details stencilled on cover with paint. The GI pipe shall be provided with staggered holes of 16 No of 12mm dia. The earth electrode shall be filled with Charcoal, Salt, Sand and Bentonite Powder 10kgs around 150mm from the bottom of the pipe to the bottom of CC chamber giving each connections with GI strip of 50x6mm with providing suitable size 14No holes with GI washers, nutbolts GI, compete with all required materials cost and labour charges, the earthing shall conform to IS 3043.
10
-
52620
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways Boxes along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 172x52mm 2mm thick including all required accessories
400
-
154400
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways Boxes along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 222x52mm 2mm thick including all required accessories
300
-
144900
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways Boxes along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 372x52mm 2mm thick including all required accessories
200
-
186400
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 32mm pvc conduit along with all required accessories
2000
-
230000
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 100x38mm 2mm thick including all required accessories
1500
-
766500
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 150x38mm 2mm thick including all required accessories
1500
-
1014000
... More
IT Tower;Supply and Installation of following sizes G.I. Raceways along with required junction boxes, fixing arrangements, with coupler plates, and the race way should be fitted on the floor, along with suitable junction boxes with four sides opening, multilayer junction boxes at crossings without any interruptions etc. complete. (Make:Legrand /OBO) 300x38mm 2mm thick including all required accessories
1000
-
1159000
... More
IT Tower;Supply and Installation of 600mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
50
-
52600
... More
IT Tower;Supply and Installation of 300mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
50
-
32850
... More
IT Tower;Supply, transportation and Installation of 600mm x 75mm x 2mm thick hot dip GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete ISI Make profab or its equivalent.
600
-
1003200
... More
IT Tower;Supply, transportation and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.ISI Make profab or its equivalent
600
-
552600
... More
IT Tower;Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.
10
-
9190
... More
IT Tower;Supply and Transportation of Outer dia 78mm and Inner dia 63mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete Makes:DURALINE (Dura Guard) or its equivalent make.
10
-
2290
... More
IT Tower;Supply and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete Makes:DURALINE (Dura Guard) or its equivalent make.
50
-
8500
... More
IT Tower;Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required. 150mm dia NP2 RCC Hume pipe
50
-
21250
... More
IT Tower;Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required. 300mm dia NP2 RCC Hume pipe
50
-
33450
... More
IT Tower;Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.
6000
-
516000
... More
IT Tower;Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.
10
-
1230
... More
IT Tower;Supply of down conductor of 1x70sqmm single core PVC insulated unarmoured copper conductor cable of ISI mark
250
-
103750
... More
IT Tower;Providing earth electrode of low carbon steel rod of 17mm dia coated with 250micron thick copper 3mtr long with clamps and 2 bags of LORESCO ZEROLITE back fill compound etc complete
2
-
33702
... More
IT Tower;Supply and installation of electro mechanical counter
2
-
34084
... More
IT Tower;Installtion and commissioning of INE /NIMBUS/FOREND or equivalent advanced lighting protection systems which includes 1. Laying of CC Bed. 2. Installtion of lighting Rod, Counter, earth electrodes, 3. Laying of down conductor 4. Interconnection between the electrodes . 5. Termination of down conductor to earth bus etc complete.
2
-
79622
... More
IT Tower;LIGHTNING PROTECTION SYSTEM: Supply and installation of NIMBUS CPT-3/NLP 2200/ FOREND(ESE-EU) Advanced lighting protection with capturing head of 135-210mm diameter, 205-580mm height and 4.60-4.940 kgs and having Rod length 760mm, weight 1.795 kgs with stainless steel rod, working ont the principle of ESE Early streamer emission technology , having a coverage radius of 79mts when mounted on 10-15mts height of existing lattice tower giving level 1 protection and anticipation emission time of 60micro seconds / 72 micro seconds. The NIMBUS is manufacturing according to standard NFC 17 102 and UNE 21186-96 including functional integrity etc. complete. Make INE/ NIMBUS/ FOREND
2
-
259042
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M ) 1 core 16sqmm Copper.Ar.cable
18
-
2520
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3 core 2.5sqmm Copper.Ar.cable
2
-
190
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3 core 4sqmm Copper.Ar.cable
4
-
420
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3 core 6sqmm Copper.Ar.cable
4
-
500
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )4 core 4sqmm Copper.Ar.cable
2
-
310
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )4 core 6sqmm Copper.Ar.cable
6
-
990
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )4 core 10sqmm Copper.Ar.cable
10
-
3550
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M ) 4 core 16sqmm Copper.Ar.cable
48
-
12720
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M ) 4 core 10sqmm Al.Ar.cable
14
-
4228
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )4 core 16sqmm Al.Ar.cable
24
-
8880
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )4 core 25sqmm Al.Ar.cable
20
-
7840
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3.5core 50sqmm AL.Ar.cable
4
-
2456
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M ) 3.5core 70sqmm AL.Ar.cable
2
-
1710
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3.5core 95sqmm AL.Ar.cable
4
-
3440
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3.5core 120sqmm AL.Ar.cable
6
-
6930
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M )3.5core 185sqmm AL.Ar.cable
4
-
5808
... More
IT Tower;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size including cost and conveyance of all materials and accessories with labour charges etc., complete. (Makes:Dowels/Comet/Raychem/3M ) 3.5core 300sqmm AL.Ar.cable
14
-
31724
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 1 core 16sqmm Copper.Ar.cable
10
-
2220
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard3 core 2.5sqmm Copper.Ar.cable
300
-
45000
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 3 core 4sqmm Copper.Ar.cable
200
-
36800
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 3 core 6sqmm Copper.Ar.cable
200
-
50400
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 4 core 4sqmm Copper.Ar.cable
400
-
103200
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 4 core 6sqmm Copper.Ar.cable
10
-
3540
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 4 core 10sqmm Copper.Ar.cable
10
-
5360
... More
IT Tower;Supply,transportation, tesitng and laying of following size PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 4 core 16sqmm Copper.Ar.cable
10
-
8940
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 4 core 10sqmm Al.Ar.cable
870
-
175740
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 4 core 16sqmm Al.Ar.cable
2350
-
519350
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 4 core 25sqmm Al.Ar.cable
10
-
2770
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 50sqmm AL.Ar.cable
1500
-
648000
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 70sqmm AL.Ar.cable
10
-
5500
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 95sqmm AL.Ar.cable
100
-
71300
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 120sqmm AL.Ar.cable
100
-
86900
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI )3.5core 185sqmm AL.Ar.cable
100
-
120300
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 240sqmm AL.Ar.cable
10
-
15220
... More
IT Tower;Supply and transportation of following XLPE insulated, 1100V grade armoured aluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I laid on wall/ cable trays including cost and conveyance of all materials and accessories with labor charges etc., complete.(Makes: Polycab / Universal / Havells / Gloster / KEI ) 3.5core 300sqmm AL.Ar.cable
760
-
1413600
... More
IT Tower;Providing Double compression end terminations for the cable 14core 1.5sq.mm with compression type steel gland, Bi-metallic lugs using crimping tool,Insulation tape, Identification tags etc., including end termination and Earthing of Gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Jainson/Dowells
2
-
604
... More
IT Tower;Providing Double compression end terminations for the cable 10core 1.5sq.mm with compression type steel gland, Bi-metallic lugs using crimping tool,Insulation tape, Identification tags etc., including end termination and Earthing of Gland.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: Jainson/Dowells
8
-
2416
... More
IT Tower;Supply, laying and commissioning of 16core 1.5sq.mm size 1.1KV grade PVC insulated armored multi strand copper conductor under ground cable, in built up cable trench/already laid RCC hume pipe or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kable/Havells
60
-
21000
... More
IT Tower;Supply, laying and commissioning of 10core 1.5sq.mm size 1.1KV grade PVC insulated armored multi strand copper cable in existing cable trench or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make:Polycab/RR Kable/Havells
180
-
42660
... More
IT Tower;Supply, fixing and installation of Hot / Fresh air exhaust/supply ducts with suitable size frame Al./ GI ducts with all fixing accessories, insulation as required etc. The Al./GI sheet shall be as per required standards and directions of the Engineer-in-Charge for finished item of work etc complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
15
-
20925
... More
IT Tower;Supply and fabrication of supports for silencer/ exhaust pipe made out of MS channels/angles including cutting, welding and fabrication to the required size and painting with 2 coats of anti corrosive paint and 2 coats of synthetic enamel paint of Grey/ Black color complete as required (as per CPCB-II norms upto Terrace floor) . NOTE: If the DGs are located open to sky then a suitable stack has to be provided upto minimum of 30Mtrs height as per CPCP-II norms.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
8500
-
731000
... More
IT Tower;DIESEL GENERATOR : Supply, Transportation, erection and commissioning (including Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 500 KVA out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per Latest CPCB norms etc as per following specifications mentioned below. A. Alternator : The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.Make : Kirloskar / Stamford / Crompton Greaves / Leroy/Somer. B.Diesel Engine : Diesel Engine start, developing suitable 580 BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 500 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. Make : Kirloskar / Cummins / Mahindra & Mahindra / Greaves . 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of 320 A rating of Schenieder / L&T make for EB and DG .03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of L&T make. 11. Main supply air break contactor of L&T make. 12. Audio Visual announciation . 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons.14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
1
-
3945707
... More
IT Tower;FLOOR WISE UPS PANEL (3RD & 4TH) Incoming : 250A 25KA TPN MCCB with with thermal setting plug Bus bars : 400A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 16KA TPN MCCBs ? 6Nos Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-160A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/Schnider/Havells/ABB
2
-
183240
... More
IT Tower;FLOOR WISE UPS PANEL (1ST & 2ND) Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 160A 25KA TPN MCCB with with thermal setting plug Bus bars : 300A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 16KA TPN MCCBs ? 6Nos Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-160A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/Schnider/Havells/ABB
2
-
161690
... More
IT Tower;FOURTH FLOOR HVAC PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 320A 25KA TPN MCCB with with thermal setting plug Bus bars : 500A TPN Aluminium Bus bars - 1Set, Outgoings : 125A 16KA TPN MCCBs ? 10Nos, 63A 16KA TPN MCCBs ? 16Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
280724
... More
IT Tower;THIRD FLOOR HVAC PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 320A 25KA TPN MCCB with with thermal setting plug Bus bars : 500A TPN Aluminium Bus bars - 1Set, Outgoings : 125A 16KA TPN MCCBs ? 10Nos, 63A 16KA TPN MCCBs ? 7Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
201662
... More
IT Tower;SECOND FLOOR HVAC PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 320A 25KA TPN MCCB with with thermal setting plug Bus bars : 500A TPN Aluminium Bus bars - 1Set, Outgoings : 125A 16KA TPN MCCBs ? 7Nos, 63A 16KA TPN MCCBs ? 8Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
182627
... More
IT Tower;FIRST FLOOR HVAC PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 250A 25KA TPN MCCB with with thermal setting plug Bus bars : 400A TPN Aluminium Bus bars - 1Set, Outgoings : 125A 16KA TPN MCCBs ? 7Nos, 63A 16KA TPN MCCBs ? 5Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
149328
... More
IT Tower;FLOOR LIGHTING POWER PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 160A 25KA TPN MCCB with with thermal setting plug & 200A FP Auto Change Over Switch ? 1set, + Auto Change over switch 160A Bus bars : 200A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 25KA TPN MCCBs ? 10Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
4
-
538420
... More
IT Tower;EMERGENCY POWER PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 63A 16KA TPN MCCB with with thermal setting plug & 63A FP Auto Change Over Switch ? 1set, Bus bars : 200A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 10KA TPN MCBs ? 10Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-63A Digital Ammeter with CTs of Ratio 63/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
94794
... More
IT Tower;LIFTS PANEL Supply, installation and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 160A 25KA TPN MCCB with with thermal setting plug & 200A FP Auto Change Over Switch ? 1set, Bus bars : 200A TPN Aluminium Bus bars - 1Set, Outgoings : 63A 25KA TPN MCCBs ? 6Nos, 25A 10KA DP MCBs ?3Nos, Metering :i) 0 - 500V Voltmeter with Selector switch ? 1set , ii)0-250A Digital Ammeter with CTs of Ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set, iii) LED type Phase indication lamps with individual MCB control and toggle switches -1set.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/ seimens /Legrand/ABB
1
-
131459
... More
IT Tower;COMMON UTILITIES PANEL Design, fabrication,Supply, installation, testing and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 250A 35KA TPN MCCB with thermal setting plug ? 2sets, Bus bars : 300A TPN Aluminium Bus bar - 1Set, Outgoings : 63A 16KA TPN MCBs-13Nos, 25A 10KA TP MCBs ('C'-curve) ? 8Nos, 80A TP AC3 duty contactor with timers -2sets, 20A 10KA DP MCBs ('C'-curve) ? 4Nos, As per SLD Metering : i) 0 - 500V Voltmeter with Selector switch ? 1sets ii)0-250A Digital Ammeter with CTs of Ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -1sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, iv)Digital Energy Meters ? 5Nos complete with the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.(Makes: SIEMENS / Legrand / L&T/ABB)
1
-
139375
... More
IT Tower;UPS OUTPUT PANEL Design, fabrication,Supply, installation, testing and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 250A 35KA TPN MCCB with thermal setting plug ? 5sets, Bus bars : 800A TPN Aluminium Bus bar - 1Set, Outgoings : 630A 35KA TPN MCCBs-2Nos, As per SLD Metering : i) 0 - 500V Voltmeter with Selector switch ? 1sets ii)0-630A Digital Ammeter with CTs of Ratio 630/5A, Class 1 Accuracy and 15VA burden and selector switch -1sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, iv)Digital Energy Meters ? 5Nos complete with the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.(Makes: SIEMENS / Legrand / L&T/ABB)
1
-
268063
... More
IT Tower;UPS INPUT PANEL Design, fabrication,Supply, installation, testing and commissiong of panel as per IEC 61439 (PTTA) with Incoming : 630A 50KA TPN MCCB with thermal setting plug ? 2sets, Bus bars : 800A TPN Aluminium Bus bar - 1Set, Outgoings : 250A 35KA TPN MCCBs-5Nos, As per SLD Metering : i) 0 - 500V Voltmeter with Selector switch ? 1sets ii)0-630A Digital Ammeter with CTs of Ratio 630/5A, Class 1 Accuracy and 15VA burden and selector switch -1sets, iii) LED type Phase indication lamps with individual MCB control and toggle switches -2sets, iv)Digital Energy Meters ? 5Nos complete with the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.(Makes: SIEMENS / Legrand / L&T/ABB/)
1
-
255781
... More
IT Tower;CAPACITOR BANK PANEL ( IN SAME ABOVE PANEL ) AUTOMATIC PF IMPROVEMENT PANEL (350KVAR APFCR PANEL) - Design, fabrication Supply, installation, testing and commissioning of APFCR Panel as per IEC-61439 standards (PTTA) with Incoming : 800A 50KA TPN MCCB with Neutral link ? 1set, Bus bars : 800A TPN Aluminium Bus bars-1set, Outgoings: 125A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 50KVAR MPP 440V Delta connected heavy duty Capacitors-5sets, 80A,25KA TP+NL MCCB with 7% Reactor and Thyristor based control switch and 25KVAR MPP 440V Delta connected heavy duty Capacitors-4set, Features: Microprocessor based regulator capable of switching stages fitted with detuned filters of approprirate rating with use of electro mechanical contactors and monitoring simultaneously various electrical parameters like V,I,PF,KW,KVA,Harmonics, Each Individual Stage to be controlled by the Regulator through Electronic Contactors. Both Automatic and Manual Mode Availabe, Metering For Incomer : 0-500V Digital Voltmeter with selector switch and fuses-1 set , 0-400A Digital Ammeter with CTs of Ratio 400-200/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set , LED Phase indication lamps with individual fuse and control with toggle switches- 1 set, 7 stage micro processor based APFC relay with PF meter-1set ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Makes: SIEMENS ( 3WL) / Legrand (DM3) / L&T (U Power - Omega)
1
-
408561
... More
IT Tower;Design, Fabrication, Testing and Commissioning of Indoor type MPCC Panel with as per given specification with following switchgears.The panel includes the incomings from Transformer ,LT-kiosk and Auto-synchronizing panel and outgoings for all the loads. The Panel is manufactured free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of good quality 16 SWG CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment /switchgear. The panel shall be Top/ Bottom entry as per site conditions. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and load bearing structure shall be of 1.6mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure and panel as per IEC-61439 standards (PTTA) . (Make: Legrand/ L&T/ Schneider) ACB Make - Siemens (Sentron- 3WL) / L&T U Power / ABB Emax / C&S.Winmaster2 / Legrand DMX3 MCCB Make - L&T- D shine /Legrand -DP X3/ Siemens-3VL / Hagerh3/ C&S -Winbreak. EB INCOMER:1600A 4 Pole, ACB , 65kA ,Confirms to IS13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit, neutral and earth fault Protection DG INCOMER:1600A 4 Pole, ACB , 65kA ,Confirms to IS13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit, neutral and earth fault Protection 1600A 4 Pole, ACB , 65kA ,Confirms to IS13947-2, IEC 60947-2 and BS-EN 60947 with Micro processer based having over load, shot circuit, neutral and earth fault Protection Metering : i) 0 - 500V Digital Voltmeter with Selector switch ? 4sets, ii)0-1600A Digital Ammeter with CTs of Ratio 1600/5A, Class 1 Accuracy and 15VA burden and selector switch -2sets, iii)LED type Phase indication lamps with individual TPMCB control and toggle switches -2sets, iv) Control MCBs for Power failure indication -2sets, v) 800-1600/5A CT in R Phase for APFCR ?2sets, vi) CT Operated load Manager with RS485 connectivity ? 2nos, vii)CT Operated D-Kwh energy meter with RS485 connectivity ? 2nos Outgoings: 1250A 50KA TPN ACBs with Microprocessor based inbuilt display with releases of O/L, S/C, Neutral Protection & E/F ? 2nos, 800A 50KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? ? 1nos, 630A 50KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? ? 2nos, 400 35KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? 3nos, 250,25KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? 2nos, 200 25KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? 1nos, 160, 25KA TPN MCCB with Microprocessor based inbuilt releases of O/L, S/C, Neutral Protection & E/F ? 2nos,
1
-
1873491
... More
IT Tower;End Feed Units Supply & Installation of the 630A rated (Between Main PCC & Raw Power Rising Main) End Feed Units with 4-Pole MCCB, 50KA along with compl;ete fixing accessories, LHS/RHS type as required by site condition, Bus truncking integrally fitted, cable gland plates for outgoing cables etc completely ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
1
-
17610
... More
IT Tower;End Feed Units Supply & Installation of the 1250A rated (Between Main PCC & Raw Power Rising Main) End Feed Units with 4-Pole ACB, 50KA along with compl;ete fixing accessories, LHS/RHS type as required by site condition, Bus truncking integrally fitted, cable gland plates for outgoing cables etc completely ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
1
-
23632
... More
IT Tower;TAP OFFs:Supply and installation of 250A 25KA TPN MCCB (Raw Power Rising main) with suitable enclosure (Factory made & suitable to the Sandwich Rising Mains) as a Tap Off on the above Rising Main/ Busduct. The buslinks shall be provided with suitable material bolts, nuts & washers shall be suitable to terminate suitable rating XLPE or Cu Arm. cables on O/G and also with suitable rating resincast CTs and with dual reading digital energy meters (DWH). The energy meters shall have RS485 port for BMS Compatability. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
3
-
116508
... More
IT Tower;TAP OFFs:Supply and installation of 320A 25KA TPN MCCB (Raw Power Rising main) with suitable enclosure (Factory made & suitable to the Sandwich Rising Mains) as a Tap Off on the above Rising Main/ Busduct. The buslinks shall be provided with suitable material bolts, nuts & washers shall be suitable to terminate suitable rating XLPE or Cu Arm. cables on O/G and also with suitable rating resincast CTs and with dual reading digital energy meters (DWH). The energy meters shall have RS485 port for BMS Compatability. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/ABB/C&S
3
-
145227
... More
IT Tower;Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 400 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
17610
... More
IT Tower;Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect. 400 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
17042
... More
IT Tower;SANDWICH TYPE BUSDUCTS / Raising Mains- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -400A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 1) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 630 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider./Havells/C&S
10
-
127700
... More
IT Tower;Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 630 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
23291
... More
IT Tower;Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect. 630 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
18178
... More
IT Tower;SANDWICH TYPE BUSDUCTS / Raising Mains- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -630A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 1) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 630 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider./Havells/C&S
10
-
139060
... More
IT Tower;Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 800 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
26131
... More
IT Tower;Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect. 800 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
19315
... More
IT Tower;SANDWICH TYPE BUSDUCTS / Raising Mains- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -800A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 1) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 800 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider./Havells/C&S
10
-
149290
... More
IT Tower;Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete 1250 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
29313
... More
IT Tower;Supply and Fixing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect. 1250 Amp Capacity TPN Alluminium Bus Duct (Indoor type) and accessories as mentioned below (DG Sets to DG Sync Panel) ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. .Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
1
-
24995
... More
IT Tower;SANDWICH TYPE BUSDUCTS / Raising Mains- Supply fabrication, ,erection, testing and commissioning of 415V Straight Run -1250A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Indoor type Bus duct 1) non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 800 Amp Capacity TPN Alluminium Bus Duct (Indoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider./Havells/C&S
10
-
183370
... More
IT Tower;Supply, fixing and testing of Terminal flange with adopter box and extension of bus bar for terminating the bus duct complete for 1600A Sandwich busduct including all necessary items etc .complete ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/Havells/C&S
2
-
330000
... More
IT Tower;Supply,fixing and testing of Copper Braided Flexible Jumper with necessary size Enclosure box, Hardware etc complete in all respect suitable for 1600A Sandwich busduct including all necessary items etc ,complete.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/Legrand/Schnider/Havells/C&S
2
-
59080
... More
IT Tower;SANDWICH TYPE BUSDUCTS- Supply fabrication, ,erection, testing and commissioning of outdoor type 415V Straight Run -1600A TPN,415 V,3-Phase, 4 wire with 100% neutral and 2 Runs of 50x6 mm GI earth strip -Outdoor type Bus duct TPN non phase segregated Bus duct made out of 14SWG MS sheet with painting after Seven tank process and consisting of suitable rating TPN Aluminium Busbars(@0.8A/sq.mm) and Copper Busbars(@1.2A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanized GI strip around the Bus duct complete as required. The Busduct shall be sandwich type (Factory made). 1600 Amp Capacity TPN Alluminium Bus Duct (Outdoor type). The bus duct should be supported with vertical supports and complete scaling of bus duct and the GA drawings shall be approved by department.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes: L&T/seimens/ Legrand/ Schnider/ Havells/C&S
10
-
242000
... More
IT Tower;LT Kiosk : Supply, Installation, Testing & Commissioning of 1600A, 65KA, 4Pole MDO ACB with Microprocessor based releases for open circuit and short circuit earth fault with core balance CT of ratio 1600/5A CL:1.0, 15VA CT's and Metering (Voltmeter, Ammeter and Indication Lamps) in Indoor type enclosure made out of 2mm thick CRCA sheet including all accessories like suitable MCBs as per the requirement. The enclosure shall have provision for busduct entry for incoming & busduct/cables for outgoing. The Panel shall be Indoor kiosk type. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc Including all taxes except GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:L&T/ABB/ Seimens/ schnider /Havells/Legrand/C&S
1
-
353449
... More
IT Tower;Supply, Transportation, Testing and Commissioning of Outdoor Type 11KV, 1000 KVA TRANSFORMER and shall be designed and manufactured as per Latest IS:1180 level-II and Energy Efficiency Level-II with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under and makes approved venders only and per approvals of TSSPDCL. ( Makes : Essener/ Powertech / Wilson / Pete / ABB ) 1. Quantity : 1 2. Rated KVA : 1000KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40°C in oil 45°C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 11kV 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. ON LOAD TAP CHANGER as per standard taps and gear 21. Terminal arrangement. a.HV: HT terminal box for cable termination b. LV: Cable box suitable to receive LT XLPE cables. 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] 1860 watts 24. Total Losses at 100% Loading [Watts] [Max] 5300 watts 25.Percentage Impedance at 75 deg. C at 5.0% as per IS-2026 26. No Load current: Less than 2% of full load current. 27. Standard Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type)
1
-
1853856
... More
IT Tower;Supply,Fixing,Testing and commissioning of 11KV HT heat shrinkable cable termination for cable of 11KV,3 core 185Sq.mm Al. Ar XLPE Indoor using long neck bimetallic lugs ,and all accessories complete as per requirement of site. ( Makes : Raychem / M Seal/ 3M / Denson / Multy )
4
-
39640
... More
IT Tower;Supply,Fixing,Testing and commissioning of 11KV HT heat shrinkable cable termination for cable of 11KV,3 core 185Sq.mm Al. Ar XLPE Outdoor/Indoor using long neck bimetallic lugs ,and all accessories complete as per requirement of site. ( Makes : Raychem / M Seal/ 3M / Denson / Multy )
4
-
42840
... More
IT Tower;Supply, laying, Testing and commissioning of 11kV 3core 185 sqmm Aluminium Armoured XLPE insulated cable from single pole structure HG fuse set to CT/PT I/C and from CT/PT O/G to HT VCB-1 Breaker I/C and from HT O/D VCB-1 Breaker O/G to HT VCB-2 Breaker I/C and from HT I/D VCB-2 Breaker O/G Transformer primary incoming as per approvals of consultant or as directed by site engineer and requirement of site. (Makes : Polycab / Torrent / Unicab/ Havells / Gloster)
250
-
375000
... More
IT Tower;11KV HT 3- BREAKER PANEL - Outdoor type: Supply, Installation, Testing and commissioning of indoor type floor mounted metal clad VCB panel with 3 Nos VCBs, totally enclosed and fully inter locked horizantal draw out , horizantal isolated type breaker as per IS 13118 Specifications and as amended upto date and additional specifications, having capacities mentioned below, single break, trip free mechanism, motorised operated spring / manually charged and auto/manually closed breaker suitable for use on 11KV, 3 Phase, 50 HZ AC supply with short circuit fault level of 350 MVA, complete with self contained, fully inter locked rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630A capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring charging motor, 110V DC closing and tripping coil, safety shutter assembly, shunt trip coil and auxilary switch of 4 NO + 4 NC and equipped with the following switchgears and accessories including connections suitable for XLPE 11 KV cable, cable entry from bottom, end termination with heat shrinkable jointing material etc as required including construction of suitable CC works for VCB's etc complete. Makes:Kirloskar / L&T / Siemens / ABB INCOMER - 1 No Vaccum circuit breaker electrical drawout type TP 11 KV 630 A not less than 18 KA rated short circuit rating current -1No POTENTIAL TRANSFORMER:1 No. 11000 / 110 Volts PT, Class 1 accuracy, 100 VA burden with HT/LT fuses. CURRENT TRANSFORMER: 3 Nos epoxy resin cast CTs of ratio 100-300/5A, 15VA burden and accuracy class 1.0 for metering and class 5P10 for protection METERING 1No Digital type Ammeter and selector switch of makes CONZERV/EQVT 1 No digital type Voltmeter with 0-15KV range, slector switch for Voltmeter of makes CONZERV/EQVT 1No Digital Multifunction meter of makes CONZERV/EQVT Heater ON/OFF switch with space heater and thermostat, single phase switch with socket cubical lamp for panel illunmination with door limit switch ,MCB's for AC & DC control. LED indication lamps for breaker on, breaker off, spring charge indication, trip ciruit healthy with push button, Auto trip indication meter, Auxilary contact for service test position (4No + 4 NC) service and test positions and R/Y/B indication lamps. PROTECTION: 1 Nos. Microprocessor based IDMTL 3 over current and 1 earth fault relay with Over current, earth fault and short circuit protection. High speed tripping relay ANNUNCIATION: 8 Window annunciation panel with push buttons and hooters. POWER PACK: Supply, Installation, testing and commissioning of Power pack with 230V input and 110V DC continuous output suitable for closing / tripping / indication of 3 Nos VCBs with 2.5sqmm FRLS copper cable etc as required. OUTGOINGS - 2 Nos 630A VCBs draw out type TP 11 KV 630 A not less than 16 KA rated short circuit rating current. Each breaker shall consist the following. CURRENT TRANSFORMER: Epoxy resin cast CTs of ratio 300/5A, 15VA burden and accuracy class 1.0 for metering and class 5P10 for protection - 3 Nos Digital type Ammeter and selector switch - 1 NoMakes : CONZERV / EQVT Digital Multifunction meter - 1 No Makes: CONZERV / EQVT PROTECTION : Microprocessor based IDMTL 3 over current and 1 earth fault relay with Over current, earth fault and short circuit protection - 1 No High speed tripping relay Auxiliary relay for bucholz A/T,OTI A/T, WTI A/T Heater ON/OFF switch with space heater and thermostat, single phase switch with socket cubical lamp for panel illunmination with door limit switch ,MCB's for AC & DC control. INDICATION LAMPS: LED indication lamps for breaker on, breaker off, spring charge indication, trip ciruit healthy with push button, Auto trip indication meter, Auxilary contact for service test position ( 4No+ 4NC) service and test positions and R/Y/B indication lamps. ANNUNCIATION: 8 Window annunciation panel with push buttons and hooters. 1 No. rear entry cable box suitable to receive 11 KV, 1 run of 3CX 185 sqmm cable(XLPE) . 1 set of misc items like control fuses , control wiring , inter connections, nuts, bolts, bus trunking including all connected accessories etc. 1 Set of 11 KV, 630A, 350 MVA alluminium Bus Bar. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1443479
... More
IT Tower;Supply, laying, Testing and commissioning of HT meter wirings from CT/PT to HT meter including plumbing works of all materials and labour charges.
1
-
4500
... More
IT Tower;Supply, Installation, Testing & Commissioning of HT meter box as approved By Department fabricated out of good quality 14 SWG CRCA sheet steel and MS angle of size 60mmX6mm having provision for fixing of HT Meter .
1
-
25000
... More
IT Tower;Department CT/PT to be procured from Department stores & Testing and installation of unit with all required mounting accessories including labour charges for complete erection for HT side as per details of TSSPDCL. & Liasioning approvals sanctioning load for HT meter from TSSPDCL and Liasioning approvals and sanctioning from Dy.CEIG.
1
-
50000
... More
IT Tower;Supply, installation, Testing and commissioning of 11KV Disc insulators with metal parts for fixing of conductors Jumpers at single pole structure complete as per requirement of site.
6
-
3612
... More
IT Tower;Supply, installation, Testing and commissioning of 11 KV pin Insulator (IS 731/1971 ) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc.,with complete as per requirement of site.
9
-
2763
... More
IT Tower;Supply, installation, testing and commissioning of 11 KV Horn Gap fuse set as per IS 9385 on a SP structure , Hot dipped Hard ware, fuse wire of required size etc., complete conveyance of all materials and labour charges.
1
-
4949
... More
IT Tower;Supply, installation, testing and commissioning of 11 KV ,400 A 3 phase AB switch with all standard accessories etc., complete with operating rod cost and conveyance of all materials.
1
-
8936
... More
IT Tower;Supply, laying, stringing, binding of HT Conductor of size 55 sqmm AAA to be run by tapping from the nearby HT Line to single pole structure complete job for three runs of conductor.
30
-
1170
... More
IT Tower;Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 400A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.
1
-
82484
... More
IT Tower;100KLD - ESTP Supply, installation, testing and commissioning of 100KLD E-STP set up for the building as shown in the drawing including all kind of materials, accessories, labour complete as directed by Engineer - In - Charge Bar screen - BSC- Supply Providing, installing, testing and commissioning of Manually raked Bar Screen fabricated in Mild Steel Epoxy coated(MSEP)material of approved design by using MS Angles of suitable opening,complete as per relavant standards,design,technical specificaton the suitable velocity across the bar screen for a capacity of 100 KLD STP -1No Sewage Feed pumps - P1 & P2 Providing,installing,testing and commissioning of non-clog pumps, suitable capacity for Sewage transfer from Sewage collection Tank to e-STP Reactor- Capacity:5 m3/hr @ 15 mH , 2.0 Nos(1w+1s) Make: Kirloskar, CRI,Equi E-STP module - EC - Providing, installing, testing and commissioning of e-STP reactor with suitable thickness MOULDED F.R.P,complete with all internal arrangements for flow distribution, froth floatation,on-line air venturi and complete electrode assembly-one set,of suitable diameter and Height including valve set assembly for flow regulation and froth removal assembly consisting of gear operated FRP skimmer arm and skimmer,central trough for collection and froth chamber and piping to ground level,Capacity -2500 lit -1Set - Except GST.Sludge pumps - P3 & P4 - Providing,installing,testing & commissioning of self priming pumps of suitable capacity for Sludge transfer from settling tank to sludge dewatering system(Bag filter). Capacity:1 m3/hr @ 15 mH , 2.0 Nos(1w+1s) Make: Kirloskar, CRI,Equi Bag Filter - BGF : Providing, installing, testing and commissioning of BAG FILTER.,complete with all internal arrangements for all Internal Piping and 2 Bags Assembly MS Stands for each bag with all accessories, MS Make tank of suitable dimensions, and height complete with internal arrangements for sludge collection. -1No Scum Filter - SF : E- CELL Scum Filter Chamber with suitable thickness MOULDED PP WITH F.R.P., complete with all internal arrangements for flow distribution, froth floatation, on-line air venturi and complete with media - one set, of suitable valve set assembly for flow regulation. -1No Filter Feed pumps - P5 & P6 - Providing, installing, testing and commissioning of centrifugal monoblock pumps of suitable capacity to feed clear water from clear water tank to Filters., Sand & Carbon filter accrodingly . Capacity:5 m3/hr @ 35 mH , 2.0 Nos(1w+1s) Make: Kirloskar, CRI,Equi Sand Filter - DMF : Supply , testing commisioning of sand filtration Mode FRP tank of suitable dimensions , and height complete with internal arrangements for flow distribution at inlet and outlet, Multiport valve arrangement ,including sieved SAND MEDIA of required quantity . -1No Size : 3072 Make: Pentair/Advance/Aventura Carbon filter module - ACF : Supply , testing commisioning of Carbon filtration Mode FRP tank of suitable dimensions , and height complete with internal arrangements for flow distribution at inlet and outlet, Multiport valve arrangement ,including sieved Activated Carbon required quantity. -1No Size : 3072 Make: Pentair/Advance/Aventura Filter backwash pump - P7& P8 : Providing,installing,testing and commissioning of centrifugal monoblock pump with the capacity of for back wash of The sand filter and the carbon filter. Capacity:10 m3/hr @ 20 mH , 2.0 Nos(1w+1s) Make: Kirloskar, CRI,Equi Alum Dosing system -ADS : These alum dosing systems manages coagulant dosing rate varuable quality of water. further, it is technologically advanced and automatic system monitors overdosing and underdosing of chemical Capacity -0-6 lph, HDPE Tank-100 litres(1.0 No) Make : E Dose, IDose Hypo Dosing System - HDS : Sodium hypochlorite is a compound that can be effectively used for water sanitisation and sterilisation. It is used on a large scale for surface purification, bleaching, odor removal and water disinfection. Capacity -0- 6 lph, HDPE Tank-100 litres(1.0 No) Make : E Dose, IDose Instrumentation : Supply and Fixing of instruments as per approved specification of suitable sizes, includes pressure guages(1-3.5 kg/cm2),flow meters(1-6 m3/hr),level switches etc. -1 Lot Make - Aster, Waree, H Guru,Equi Motor control centre : Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The painting of the complete system shall be powder coated. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip , door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards ,including with transformer,rectifier & all switchgear components,MCCB for incomer & MCB fuseless units,push button stations,alarm etc -1Set Cables & Cable Tray : Providing Inter plant power and control cabling with cables of approved size and copper earthing from control panel to various quipment like motor startes,pump motors etc.,including making end terminations etc,The cabling shall done with copper conductor armoured cables or copper conductor submersibles cables with suitable protective piping for floor crossing.(Including cabel Hot dipped G.I cable Tray,3 Core cable,gland,etc), race ways ,All cables - both AC and DC cables for each electrode assembly inside the e-STP cell Module , including all glanding and termination accessories. - 1Set Make: gemcab/polycab/universal or equivalent Pipe & Fittings - Poviding, installing and commissioning of suitable size of inter connecting UPVC piping with all components including Non Return Valve ,bends , nipples,elbows etc complete. -1Lot Make - Finolex / equivalent / Astral/Supreme
1
-
2416000
... More
IT Tower;Supply, fixing & testing of 6 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Finolex / Million / Polycab / Havells / V-Guard / Gold Medal / GM for Bore Well.Except GST.
100
-
22723
... More
IT Tower;Supply, fixing & testing of 10 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Finolex / Million / Polycab / Havells / V-Guard / Gold Medal / GM .Except GST.
100
-
36811.26
... More
IT Tower;Supply, Fixing & testing of D.O.L Starter 415V, 3 phase, 50Hz.. enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable upto 10.0.HP. Makes: Siemens / Crompton / L&T.Except GST.
1
-
3976.53
... More
IT Tower;Supply, erecting & testing of 6.00HP Three phase ISI self priming Mono block IP44 motor pumpset (80x80mm). Makes: Aryan Varsha / Flowell / Waterman. - for Hydropneukatic system of pumping - Usage Water & Recycled Water ( 1 working + 1 standby) (15CUM/HR@35M HEAD).Except GST.
1
-
32031.48
... More
IT Tower;Supply, erecting & testing of 3.00HP Three phase ISI self priming Mono block IP44 motor pumpset (80x80mm). Makes: Aryan Varsha / Flowell / Waterman. - for Hydropneukatic system of pumping - Usage Water & Recycled Water ( 1 working + 1 standby) (5CUM/HR@45M HEAD).Except GST.
1
-
27494.83
... More
IT Tower;Fabrication , transportation, supply & fixing of suitable size panel board for single phase submersible motor above 2 Hp to 3 HP consisting of relay, Contactor, starting and running capacitors & cyclic operation, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes; LT / LK / BCH / Crompton/ Siemens. Except GST.
1
-
12427.21
... More
IT Tower;PUMPS & EQUIPMENT Supply, erecting & testing of 2.00HP Three phase open well ISI submersible motor pumpset.(65x50) Makes: Kirloskar / Crompton / Texmo / CRI / KSB. including all labour charges, all taxes etc complete for finished item of work as directed by the ENgineer - In- Charge ( 1 working + 1 standby) - Except GST.
2
-
39083.56
... More
IT Tower;300mm dia NP2 class hume pipes including lowering jointing, with 2 Brick supports per pipe length Except GST.
175
-
105378
... More
IT Tower;CIVIL WORKS Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification as directed by Engineer- In - Charge. Except GST.
9
-
76434.49
... More
IT Tower;a) S & F Gunmetal Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25mm NB Size Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
2
-
972.08
... More
IT Tower;a) S & F Gunmetal Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 40 mm NB Size Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
6
-
6760.98
... More
IT Tower;VALVES a) Supplying & fixing of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
2
-
3991.98
... More
IT Tower;Excavating trenches of required width and depth for drainage pipes in all kind of soil including excavation for sockets and dressing of sides ,ramming of bottoms and getting out the excavated soil and then refilling the trench with soil as required in layes not exceeding 20CM in depth incuding consolidating each deposited layer ramming ,watering etc including disposal of extra soil as directed by the engineer in charge (Rate As per Civil Data) - Except GST.
10
-
2840.4
... More
IT Tower;a) Supply, Fixing & testing of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Municipal Supply to UG Sump.Except GST.
30
-
16933.2
... More
IT Tower;a) Supply, Fixing & testing of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
25
-
28028.75
... More
IT Tower;a) Supply, Fixing & testing of 80 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
16
-
16484.16
... More
IT Tower;a) Supply, Fixing & testing of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
50
-
48502
... More
IT Tower;a) Supply, Fixing & testing of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
47
-
26528.68
... More
IT Tower;a) Supply, Fixing & testing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge - Bore Well to UG Sump.Except GST.
121
-
64035.62
... More
IT Tower;a) Supply, Fixing & testing of 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
113
-
53767.66
... More
IT Tower;a) Supply, Fixing & testing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Municipal Supply to UG Sump.Except GST.
71
-
24990.58
... More
IT Tower;a) Supply, Fixing & testing of 20 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
84
-
21950.04
... More
IT Tower;WATER PIPE SUPPLY LINES a) Supplying, fixing & testing of 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
218
-
49684.38
... More
IT Tower;Supply ,fixing and testing of PVC Rain water Khurra with C.I grating The quoted rate shall include necessary grouting the base of Khurras with aproved sealent complete - on Terrace - 150 mm x 150 mm CI Grating. Except GST.
4
-
6000
... More
IT Tower;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors. Except GST.50mm Double Socket
47
-
45590
... More
IT Tower;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors. Except GST. 6" dia (150 mm) Double Socket
100
-
216891
... More
IT Tower;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors. Except GST. 40mm Double Socket
121
-
67639
... More
IT Tower;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors. Except GST. 3" dia (76.2 mm) Double Socket
345
-
349246.95
... More
IT Tower;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors. Except GST. 40mm Double Socket
240
-
192000
... More
IT Tower;Supply and Fixing of Surface Mounted Ultra Fast Hand Dryer with air speed of 300 KMPH shall have a deep-drawn satin metal finish cover. Mounting Base and fan housing shall be fire-retardant moulded plastic. Power 550 watts (1100 watts with heating element having an option of ON /Off which is manageble by Owners). Drying time will be 10 to 15 Seconds .Unit shall have EPA E 11 filter for Clean air , UV lamp for Inside Disinfection. Electric Protection Level IP23 - Class II. Dryer will turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately two minutes after dryer turns on if an inanimate object is placed across sensor lens. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally with having 3 yeras of warranty etc., of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels (VAMA/Equivalent). Except GST.
12
-
146400
... More
IT Tower;Supplying & fixing CI floor traps 1st quality ISI marked with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 100 mm (4") and grating size 100 mm dia of weight not less than 6 Kgs Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
112
-
19978.56
... More
IT Tower;Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Ivory Gold Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
73
-
66931.51
... More
IT Tower;Supply & fixing soap dish Jaquar make queen series: with 7 years warranty: Ivory Gold Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
74
-
35059.32
... More
IT Tower;Supply & Fixing of Towel ring Jaquar make Queen series with 7 years warranty: Ivory Gold Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
74
-
47923.14
... More
IT Tower;Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty: Chrome plated Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
147
-
100208.43
... More
IT Tower;Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
73
-
247158.29
... More
IT Tower;Supply & Fixing of Bibcock Jaquar Florentine (Quarter turn)series, Chrome Finish with 7 years warranty Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
74
-
197072.36
... More
IT Tower;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock. Except GST.
74
-
401710.48
... More
IT Tower;S&F premium make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, and with 7 - 10 years warrantyof approved make including all opertaional and incidental , labour charges, all taxes etc.complete for finished item of work in all respects: Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.Except GST.
33
-
518010.24
... More
IT Tower;SANITARY & C.P. FIXTURES Supply, Installation and testing of approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Except GST.
73
-
998767.75
... More
IT Tower;Supply&Installation of Operable Partition consisting of series of individual flat elements of 88 mm thick travelling along the ceiling track assembled to form a solid wall. The sound insulation of the operable partition should be 46dB tested under third party reputed laboratory in accordance to EN 20140-3. Elements must be constructed of a torsion-free steel horizontal tube frame and torsion-stiff vertical aluminium profiles, bolted together to make the element strong and sturdy. The frame must be clad either side with 10mm MDF panels hung in acoustic free suspension from the panel frame. The elements must be inter-connected by means of a positive locking concave/convex aluminium profile with an integrated rubber strip and sealing lip. Each element must have a spindle mechanism which should be connected to the spring loaded top and bottom retractable seal. The spindle mechanism should be operated manually by a bayonet connected crank handle that acts as a lock in function during cranking process. The horizontal top and bottom seals must be retracted as per the operating mechanism and should ensure a contact pressure of 800N when the seals are completely extended. The seal spindle mechanism must be accessible while the panel is hanging for servicing and adjustment if necessary. Total disassembly of the panel frame to access internal components is not acceptable. No fixed sweep seals allowed in top and bottom of the element that would rub against the track or floor while moving the element. The telescopic element or the end closure element must open and close 120mm horizontally. The movement of the telescopic panel and the operation of the horizontal top and bottom seal and must be operated by a single mechanism. Each element must be suspended from the aluminium track on 'maintenance free' multi-directional trolley capable of withstanding a maximum load of 500kgs per element. The trolley shall consist of a four sided die cast aluminium body. Multidirectional ball bearing wheels shall be steel-rimmed mounted to each of the four side and shall be capable of navigating track intersection. The trolley shall incorporate four nylon horizontal navigating wheels, mounted to the top of the trolley body, to provide guidance for smooth operation. All Floors
33.66
-
2343745.8
... More
IT Tower;Providing and applying Two coats of Duco paint of approved shade and colour, to give an even and uniform shade applied over a coat of primer and ready made putty,fully to give a smooth and even surface including throughly brushing the surface free from water /mortor dropping and other foreign matter and sand paper smooth where ever required heights approved make as approved by Engineer-In-Charge ,including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site omplete for finished item of work.as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & ontrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
362.7
-
579543.82
... More
IT Tower;Supply and installation of 3M wall graphics fixing on existing surface of the partition and fixing with necessary adhesion solution, with approved pattern and design as per approved drawing as directed by Engineer -in-Charge,including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . All Floors
236.7
-
487464.71
... More
IT Tower;Supplying and Installation of Roller Blinds with Phifer Screen of composition of 35% Fiberglass & 65% vinyl on Fiberglass P12 - Oyester (5%)and meshweight of 488.5 g/m and fabric thickness of 0.61 mm and openness factor 5%. UV Protection 95% .Anti Microbial protection:ASTM E 2180, ASTM G21, AATCC30 Part3, ASTM D3273, Greenguard Mold and Bacteria standard ASTM6329, includes microban antimicrobial additives.Flame retardant:California U.S. Title 19 (small scale), ASTM E 84(Class 1), BS 5867 2008 Part 2 Type B performance, NFPA 701 TM#1(small scale), CAN/ULC-S 109-3 (Large and small scale).Lead Free Certification :100% Lead Free RoHS / Directive 2002/95/EC, US Consumer Product Safety Commission Section 101 and ANSI/WCMA A100.1-2007 for lead content, REACH (EC 1907/2006) compliant etc.,. Complete etc,. for finished item of work as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes except GST etc.. complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .(Makes :Sunblock/Hunter Douglas or Equivalent as approved by Engineer-in-Charge)
617.76
-
1206448.21
... More
IT Tower;Supply and Fixing of Single Glazed Glass partition of 10mm Toughened Glass using DORMA Alexa System-100 Frames to a height of maximum 4m or as per drawing.The Fixed glass to be fixed using DORMA Alexa BP100 Profiles at Top & Bottom & Alexa SP100 at sides. The profile size to be 100x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. DORMA Alexa H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel Alexa OHP100 Overpanel Profile to be used.In case of Open glass edges EP100 End Profile to be used.The Alexa profiles shall be suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Work has to be executed as approved as directed by Engineer-in-charge. All Floors
840.33
-
5084014.05
... More
IT Tower;Supply & Fixing of Aluminium Frame Single Glazed Door with using 12 mm thk toughened glass with DORMA Alexa System-100 frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Alexa STP100 Door Profile frame with clips & seals with DORMA Flush Hinges (3Nos) & TGDI- H -450 mm Handle , 917 Narrow stile Dead Lock package and DORMA TS -89, EN3-6 Door closer (as per EN 1154) with Hold Open unit necessary seals to be provided all around the door frames. For doors part of single/double glazed partiton DP100-SG/DG Door rebate profile to be used.In case of Glass overall panel Alexa OHPDP100-SD/DG Over Panel Door profile to be used.The Profile to be 2mm Gauge thickness excluding 20 Micron of Anodizing and shall be matt natural anodized, the Profile ,all the necessary clips, seals and fixing accessories for the system.as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete for finished item of work for all floors and at all levels as directed by Engineer In Charge (Size of1000 X 2400 mm)
144.88
-
4123647
... More
IT Tower;Supplying and fixing of Frame less Double leaf Glazed Door of 10 mm thick toughened glass of size 900 X 2400 mm Fully openable Patch Fitting partition and door of ' DORMA' "ULPT" range Fittings to get a clear height with top & Side Fixed panels. In general, the openable door cum Fixed panel consists Glazed Door GD: PFinish: Satin stainless steel including cost and coneyance of all materials to site, all labour charges, all taxes etc complete for finished item of work as directed by the Engineer In charge. Dorma Patch fitting with the following ItemsPatch fitting Set for frameless Single glass door consisting of: 2 Nos of ULPT 10 Bottom patch with satin SS cov.er,2 Nos of ULPT 20 Top patch with satin SS cover,2 Nos of Top pivot plate, 2 Nos of Universal corner lock UL 10 ,2 No Floor spring - BTS-75V EN 1-4,&, 4 No's Dorma Handle -TGDID 450 X 25 S,Satin SS 304, as per approved drawing colour and shade by Engineer in charge. Terrace
21.32
-
383815.43
... More
IT Tower;Providing and applying Putty with 1 to 2 mm thickness and Cement primer making 3 or more coats and with approved brand , over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation as per approved drawing colour and shade by Engineer in charge, including cost of access scaffolding , all incidental and operational charges, Transportation ,labour charges and all taxes Excluding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
3294.01
-
924529.48
... More
IT Tower;Supplying ,providing and fixing of 6 mm thick Annealed Griha rated Lacquered glass EN 16477 Humidity resistance fixed with compatible neutral core silicon/lacquered double sided tape,fixing on existing surface of the partition/wall,lacquered glass must be opaque and coated the lacquered glass polished, as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels .
68.25
-
220111.4
... More
IT Tower;Supply,Providing and Making the Mirror in toilets ,using base frame using 6 mm thick Plywood conforming to IS:303 BWR Grade is fixed to wall and exposed surface of plywood is finished with 6 mm thick Mirror and and the edges of the mirror polishing, including adhesive compound ,mirror tape nails,and using required number of SS studs not less than 12 mm , as per approved colour and shade by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all overhead charges & contrctor profit, all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . All Floors
26.4
-
60035.45
... More
IT Tower;Supply,providing and Installation Aluminium Skirting with 75 mm height and 1.50 mm thick and top surface of the skirting is finished with capping clip, fixed to the existing masonary wall/partitions to flush with grooves to pattern installed as per approved drawing colour and shade as directed Engineer -in-charge, including all incidental and operational charges, Transportation ,labour charges all overhead and contractor profit and all taxes Excluding GST & seigniorage charges etc.,, complete as directed by the Engineer-in-charge for finished item of work for all floors and all levels .( Makes: Doyle asia /Alloy/Otics/Cubic/equivalent)
239.78
-
67864.93
... More
IT Tower;Suppply,Providing,Making the Panelling with 12 mm thick Plywood and on exposed surface of the base frame conforming to IS:303 BWR Grad and Medium Fibre Board: Interior Grade - 6 mm thick conforming to IS 1593,for the existing surface of the partition/wall using with base frame using Aluminium section of size 50.80x25.40x1.44 mm thick and necessary cleat of size 35x20x3 mm thick and finished with using, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels. All Floors
124.2
-
373073.2
... More
IT Tower;Suppply,Providing,Making and Fixing of 75 mm thick Double skin partition using 12 mm thick Plywood on each side conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50x25x2 mm thick and finished with 1 mm thick Laminate for exposed surface of ply (two sides of partition) and edge surface,Air gap between the plywood boardss is lined with providing 50mm thick rock wool of density 48 Kg/m3 of approved make shall be placed in the cavity glass wool rapped with 40GSM fiber glass tissue, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels. Fourth Floor
234.15
-
1096765.62
... More
IT Tower;Suppply,Providing,Making and Fixing of 75 mm thick Double skin partition using 12 mm thick Plywood on each side conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50x25x2 mm thick and finished with 1 mm thick Laminate for exposed surface of ply (two sides of partition) and edge surface,Air gap between the plywood boardss is lined with providing 50mm thick rock wool of density 48 Kg/m3 of approved make shall be placed in the cavity glass wool rapped with 40GSM fiber glass tissue, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels. Third Floor
234.15
-
1096765.62
... More
IT Tower;Suppply,Providing,Making and Fixing of 75 mm thick Double skin partition using 12 mm thick Plywood on each side conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50x25x2 mm thick and finished with 1 mm thick Laminate for exposed surface of ply (two sides of partition) and edge surface,Air gap between the plywood boardss is lined with providing 50mm thick rock wool of density 48 Kg/m3 of approved make shall be placed in the cavity glass wool rapped with 40GSM fiber glass tissue, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels. Second Floor
236.81
-
1109225.14
... More
IT Tower;Suppply,Providing,Making and Fixing of 75 mm thick Double skin partition using 12 mm thick Plywood on each side conforming to IS:303 BWR Grade on both sides on the base frame using Aluminium section of size 50x25x2 mm thick and finished with 1 mm thick Laminate for exposed surface of ply (two sides of partition) and edge surface,Air gap between the plywood boardss is lined with providing 50mm thick rock wool of density 48 Kg/m3 of approved make shall be placed in the cavity glass wool rapped with 40GSM fiber glass tissue, ,including adhesive compund ,nails ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes, overhead charges & contrctor profit, Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all at levels. First Floor
122.13
-
572060.58
... More
IT Tower;Supply and fixing of Vito floor Alpthals multi layer 4.5mm thk sports flooring standard size of 1.8m W x 15m ,weight 3.33kg/sq.mtin gym area ,including fixing ,necessary adhesive and welding ,including cost and conveyance of all materials ,loading and unloading charges ,labour charges for fixing in position etc. to complete for finished item of work as approved by Engineer-in-charge. All Floors
126
-
349656.3
... More
IT Tower;Providing and Preparing the surface with 10.50 mm thick Engineering wooden flooring, underlaying with moisture barrier sheet of 0.20 mm thick laying on existing surface,and 2 mm thick PE Foam below flooring and using the accessories like skirting (upto 75 mm thick), beading, end profiles and T-profiles, with approved make as per approved drawing colour and shade by Engineer in charge, including all incidental and operational charges, Transportation, labour charges, all taxes but Excuding GST, for complete for finished item of work for all floors and all levels as directed by Engineer In-Charge. Make: ARMSTRONG/MAPPLE /FLORTEX or other Equivalent All Floors
308.47
-
1181008.24
... More
IT Tower;Providing, preparing the surface and laying of Tile Carpet of size of approved model, machine made solution dyed nylon with synthetic backing, carpet finished Loop pile weight not less than 450 gms/ sqm, a hot water treated carpet with a guage not less than 5mm, average density around 0.3 g/cm3, including transition profile of approved brand as per approved by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, all taxes but Excuding GST etc.,complete for finished item of work for all floors and all levels as directed by Engineer In charge make:Millken/Interface/Shaw or approved Equivalent as approved by Engineer-In-Charge All Floors
167.4
-
361249.2
... More
IT Tower;Flooring with Italian polished marble slab of 18 mm thick set over base coat of cement mortar (1:8) 20 mm thick (joints of stone must be flushed) over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.30 kgs per sqm. Jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, stone, etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying Italian polished marble to level, curing all taxes, Excluding GST & seigniorage charges on all material etc., complete as directed by Engineer-in-charge for finished item of work First Floor Lobby
134.19
-
1052973.73
... More
IT Tower;Flooring with 16 to 18 mm thick High Polished Granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete all taxes except GST for finished item of work for platforms (S.S.701 & special)
279.06
-
1280324.49
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Fourth Floor
187.8
-
326024.56
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Third Floor
187.8
-
318007.37
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Second Floor
220.8
-
364459.1
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) First Floor
323.4
-
520007.8
... More
IT Tower;Flooring with digital / polished glazed full body porcelain vitrified tiles with approved type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and of size 800x 800 mm and thickness between 12-15 mm,1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as directed by the Engineer-In -Charge, laying tiles, set over a base coat of CM (1:8) prop. 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth including all incidental and operational ,transportation ,labour charges including all taxes Excluding GST & seigniorage charges, but including cost and conveyance of all materials like cement, sand, Crushed stone sand, water, tiles, Laticrete -SP100, etc., to site including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) Fourth Floor
1061.56
-
3392517.47
... More
IT Tower;Flooring with digital / polished glazed full body porcelain vitrified tiles with approved type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and of size 800x 800 mm and thickness between 12-15 mm,1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as directed by the Engineer-In -Charge, laying tiles, set over a base coat of CM (1:8) prop. 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth including all incidental and operational ,transportation ,labour charges including all taxes Excluding GST & seigniorage charges, but including cost and conveyance of all materials like cement, sand, Crushed stone sand, water, tiles, Laticrete -SP100, etc., to site including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) Third Floor
1034.88
-
2865458.53
... More
IT Tower;Flooring with digital / polished glazed full body porcelain vitrified tiles with approved type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and of size 800x 800 mm and thickness between 12-15 mm,1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as directed by the Engineer-In -Charge, laying tiles, set over a base coat of CM (1:8) prop. 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth including all incidental and operational ,transportation ,labour charges including all taxes Excluding GST & seigniorage charges, but including cost and conveyance of all materials like cement, sand, Crushed stone sand, water, tiles, Laticrete -SP100, etc., to site including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) Second Floor
784.13
-
1836408.94
... More
IT Tower;Flooring with digital / polished glazed full body porcelain vitrified tiles with approved type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and of size 800x 800 mm and thickness between 12-15 mm,1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as directed by the Engineer-In -Charge, laying tiles, set over a base coat of CM (1:8) prop. 12mm thick using 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm as per IS 383-1970 over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neatly with Laticrete -SP100 paste mixed with pigment of matching shade to full depth including all incidental and operational ,transportation ,labour charges including all taxes Excluding GST & seigniorage charges, but including cost and conveyance of all materials like cement, sand, Crushed stone sand, water, tiles, Laticrete -SP100, etc., to site including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., complete for finished item of work. (APSS No.701 & 707) First Floor
638.74
-
1223213.67
... More
IT Tower;Supply and Installation of Spark Aluminium Baffles in Wooden Texture Ceiling of Size 75x50x3660 mm of 1.5 mm thickness ,accessories for installation baffle hanger,black spring, Channel Carrier, GI Rod Anchor Fastener.Sound attenuation 45 DB and thermal reitance 1.14m2/kwSurface Treatment ; Brushed, Roll Coated, Spray Painted Humidity Resistance : 100% RH,Fire proof ,Noncombustible GB8624,Class A, Fire proof B 1 grade, damp resistance, temperature resistance & Sound Absorption, No radiation , etc, ,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . S
221.99
-
2073066.93
... More
IT Tower;Supplying & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System of size 600 x600 x20mm ,with Dune Max Beveled Tegular Edge Tiles with Armstrong Silhouette 15mm Exposed grid. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance =84%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) with sand texture finish Dune Max in module size of 600x600x20mm, suitable for Green Building application, with Recycled content of 49%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 7.90 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & ?birdsmouth? notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty. Installation : To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum etc.,as per approved drawing colour and shade by Engineer in charge, including cost of access scaffolding , all incidental and operational charges, Transportation ,labour charges and all taxes Excluding GST etc., complete for finished item of work for all floors and all levels as directed by Engineer In Charge.
1031.33
-
1401061.8
... More
IT Tower;Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspendind the frame work using intermediate channels (45mm x15mm x15mm x0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mmx10mm x0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 1.5mmX26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound , two coats of dry wall top coat,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Fourth Floor
348.47
-
364361.56
... More
IT Tower;Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspendind the frame work using intermediate channels (45mm x15mm x15mm x0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mmx10mm x0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 1.5mmX26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound , two coats of dry wall top coat,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Third Floor
1115.42
-
1166302.04
... More
IT Tower;Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspendind the frame work using intermediate channels (45mm x15mm x15mm x0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mmx10mm x0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 1.5mmX26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound , two coats of dry wall top coat,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . Second Floor
953.06
-
996535.81
... More
IT Tower;Supplying and fixing Gyp board suspended regular single layer false ceiling (GS - MFSC-4.1 as per India Gypsum) using 12.5mm thick Gypboard conforming to IS 2095 - 1982 fixing of Gyp Steel GI perimeter channels of size 20mm x 27 mm x30mm (web) of 0.55 mm thick along with perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspendind the frame work using intermediate channels (45mm x15mm x15mm x0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25mmx10mm x0.55mm) fixed with GI cleat and steel expansion fastners and connecting clip to the ceiling fan (with knuriled web of 1.5mmX26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the Intermediate channel at 457mm c/c and fixing the 12.5mm tappered edge Gypboard with 25mm dry wall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tappered and square edges with jointing compound , two coats of dry wall top coat,as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges, overhead charges & contrctor profit , all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and at all levels . First Floor
877.06
-
917064.96
... More
IT Tower;Supplying and fixing of 12 mm thick clear toughened frameless glass for patch doors at main entrance with DORMA SS patch fittings of appropriate serial and class such as top pivot with patch,bottom patch with insert for floor spring spindle/pivot,double action floor spring ,corner lock euro profile cylinder single throw bolt projection suitable for double action swing doors with mechanical back check including providing and fixing SS handle of "C" shaped 25mm dia. 600 mm long (2 Nos per shutter including cost of all materials,labour, machinery,fabrication, installion etc.all complete. Work shall commense only after preparation of shop drawings duly approved by Engineer-in-charge/Architect.
4
-
67399.2
... More
IT Tower;Supplying and fixing of Aluminium Horizontal Fins : 50 mm X 80 mm - Refer Drawing Design, fabricate and install 50 mm X80 mm hollow aluminium extruded section of grade 6063 T5 or T6 of apporved make including super durable powder coating of 60-80 microns conforming to AAMA 2064 of required colour and shade apporved by Engineer-in-charge/Architect the fins mechanically fixed with required hardware on the face of the glass locations as specified in the drawings. The Alum fins are to be fixed post installation of the Curtainwall system with all necessary fixing fasteners, gaskets and weather seals complete and fixation to withstand the designed wind pressure and as per structural requirement.
2100
-
3973200
... More
IT Tower;Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels, all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge/Architect. Glass having properties equivalent to Saint Gobain Model ST 767 or equivalent as approved by Engineer-in-charge/Architect.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of item A.1) For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
1675
-
3062235
... More
IT Tower;Fabricating, protection, installing and fixing in position semi (grid) unitized system of structural glazing for all heights and all levels consisting of main frame and subframe system using specially designed with extruded aluminium sections as per grade 6063 T5 or T6 of apporved make including super durable powder coating of 60-80 microns conforming to AAMA 2064 of required colour and shade apporved by Engineer-in-charge.
1675
-
10754672.5
... More
IT Tower;Providing & Applying Special surface finishes(Texture effect) with Approved Concrete texture finish ( Lime based material / Microtopping effect) two coats of Travertino Romano powder + 1 coat of Aqua Wax with VELOSAN Diluted with water @ 1:3 & Colourwash with VELOSAN with water dilution @1:2 on wall surfaces which is clear from Dust and other particles. The thickness of the coats in total should be 1.5-2 mm based on already Prepared with 2 coats of putty and water based primer with our any undulations and Zero level from from all Dry wall joints. Third Floor :
339.62
-
832248.61
... More
IT Tower;Providing & Applying Special surface finishes(Texture effect) with Approved Concrete texture finish ( Lime based material / Microtopping effect) two coats of Travertino Romano powder + 1 coat of Aqua Wax with VELOSAN Diluted with water @ 1:3 & Colourwash with VELOSAN with water dilution @1:2 on wall surfaces which is clear from Dust and other particles. The thickness of the coats in total should be 1.5-2 mm based on already Prepared with 2 coats of putty and water based primer with our any undulations and Zero level from from all Dry wall joints. Second Floor
339.62
-
830502.94
... More
IT Tower;Providing & Applying Special surface finishes(Texture effect) with Approved Concrete texture finish ( Lime based material / Microtopping effect) two coats of Travertino Romano powder + 1 coat of Aqua Wax with VELOSAN Diluted with water @ 1:3 & Colourwash with VELOSAN with water dilution @1:2 on wall surfaces which is clear from Dust and other particles. The thickness of the coats in total should be 1.5-2 mm based on already Prepared with 2 coats of putty and water based primer with our any undulations and Zero level from from all Dry wall joints. irst Floor
339.62
-
828764.07
... More
IT Tower;Providing & Applying Special surface finishes(Texture effect) with Approved Concrete texture finish ( Lime based material / Microtopping effect) two coats of Travertino Romano powder + 1 coat of Aqua Wax with VELOSAN Diluted with water @ 1:3 & Colourwash with VELOSAN with water dilution @1:2 on wall surfaces which is clear from Dust and other particles. The thickness of the coats in total should be 1.5-2 mm based on already Prepared with 2 coats of putty and water based primer with our any undulations and Zero level from from all Dry wall joints. Ground Floor
138.78
-
337945.95
... More
IT Tower;Providing & Applying Special surface finishes(Texture effect) with Approved Concrete texture finish ( Lime based material / Microtopping effect) two coats of Travertino Romano powder + 1 coat of Aqua Wax with VELOSAN Diluted with water @ 1:3 & Colourwash with VELOSAN with water dilution @1:2 on wall surfaces which is clear from Dust and other particles. The thickness of the coats in total should be 1.5-2 mm based on already Prepared with 2 coats of putty and water based primer with our any undulations and Zero level from from all Dry wall joints. Basement Floor
386.27
-
936025.44
... More
IT Tower;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 800 x 800 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707). Fourth Floor
50.69
-
60527.41
... More
IT Tower;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 800 x 800 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707). Third Floor
50.69
-
58362.95
... More
IT Tower;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 800 x 800 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707). Second Floor
50.69
-
56198.99
... More
IT Tower;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 800 x 800 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707). First Floor
50.69
-
54035.03
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work Fourth Floor
326.76
-
1699109.52
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work Third Floor
326.76
-
1699109.52
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work Second Floor
326.76
-
1699109.52
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work. First Floor
326.76
-
1699109.52
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work. Ground Floor
326.76
-
1699109.52
... More
IT Tower;Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work. Basement
326.76
-
1699109.52
... More
IT Tower;Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Fourth floor
113.92
-
693254.13
... More
IT Tower;Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Third floor
113.92
-
684292.79
... More
IT Tower;Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Second floor
113.92
-
675330.31
... More
IT Tower;Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) First Floor
113.92
-
666367.83
... More
IT Tower;Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:5), 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Ground Floor
113.92
-
657405.35
... More
IT Tower;Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work. Fourth Floor
22.47
-
146703.93
... More
IT Tower;Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work. Third Floor
22.47
-
132293.47
... More
IT Tower;Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work. Second Floor
22.47
-
117883.01
... More
IT Tower;Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work. First Floor
22.47
-
103472.55
... More
IT Tower;Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, seignorage charges etc., and overheads & contractors profit complete all taxes except GST for finished item of work. Ground Floor
22.47
-
89062.09
... More
IT Tower;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) Fourth Floor
115.2
-
105719.04
... More
IT Tower;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) Third Floor
115.2
-
104505.98
... More
IT Tower;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) Second Floor
115.2
-
103292.93
... More
IT Tower;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) First Floor
115.2
-
102079.87
... More
IT Tower;Providing skirting to internal walls to 10 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete all taxes except GST for finished item of work.(APSS No.701 &707) Fourth Floor
1.46
-
173.46
... More
IT Tower;Providing skirting to internal walls to 10 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete all taxes except GST for finished item of work.(APSS No.701 &707) Third Floor
1.46
-
167.23
... More
IT Tower;Providing skirting to internal walls to 10 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete all taxes except GST for finished item of work.(APSS No.701 &707) Second Floor
1.46
-
161.02
... More
IT Tower;Providing skirting to internal walls to 10 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete all taxes except GST for finished item of work.(APSS No.701 &707) First Floor
1.46
-
154.79
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Fourth Floor
65.69
-
73755.42
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Third Floor
65.69
-
73169.46
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Second Floor
65.69
-
72583.51
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) First Floor
65.69
-
71997.55
... More
IT Tower;Flooring with non-skid full body ceramic floor tiles of size 600mm x 600mm and thickness between 8 - 10 mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Ground Floor
127.82
-
138953.12
... More
IT Tower;Vaccum dewatering the concrete floors using TREMIX or equivalent over and finishing the top surface to required level/ slope and grade with rough / polish finish using power trowels (both fan & disc) of standard make including curing, mixing of hardening compound ,cutting of VDF floor 75 mm thick in M-25 grade of concrete with minimum cement concrete of 380 kgs using 20mm to down graded aggregate Diamond Saw System (disposal of debris to be included in the quoted rate) as per specification etc. complete as per specification and drawing. (Maximum thickness of RCC flooring shall be of 75 mm) 200 microne LDPE Sheet , providing construction and expansion joins not more than 3.5mX3.5mts panals as directed by Engneer in Charge including providing necessary slopes for drain of water, in cluding all incidental all operational charges etc.,all taxes for finished item of work. Ground Floor
141.92
-
1182580.56
... More
IT Tower;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls. Fourth Floor
1374.96
-
305791.1
... More
IT Tower;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls. Third Floor
1538.89
-
342249.14
... More
IT Tower;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls. Second Floor
1418
-
315363.2
... More
IT Tower;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls First Floor
713.05
-
158582.32
... More
IT Tower;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls Ground floor
97.03
-
21579.25
... More
IT Tower;White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit all taxes except GST for finished item of work in all floors. Fourth Floor
99.93
-
4220.04
... More
IT Tower;White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit all taxes except GST for finished item of work in all floors. Third Floor
99.93
-
4220.04
... More
IT Tower;White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit all taxes except GST for finished item of work in all floors. Second Floor
99.93
-
4220.04
... More
IT Tower;White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit all taxes except GST for finished item of work in all floors. First Floor
99.93
-
4220.04
... More
IT Tower;White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit all taxes except GST for finished item of work in all floors. Ground Floor
99.93
-
4220.04
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Fourth Floor
1531.16
-
374276.75
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Third Floor
1538.89
-
368271.77
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Second Floor
1418
-
332081.42
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). First Floor
713.05
-
163338.36
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Ground Floor
1154.82
-
264535.53
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Fourth Floor
1531.16
-
634267.72
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Third Floor
1538.89
-
629559.9
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Second Floor
1418
-
572857.82
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). First Floor
713.05
-
284407.12
... More
IT Tower;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Ground Floor
1154.82
-
460613.1
... More
IT Tower;Painting to new walls with 2 or more coats of Plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:- Internal Colouring - Plastic emulsion paint - 3 Coats Fourth Floor
1531.16
-
326412.69
... More
IT Tower;Painting to new walls with 2 or more coats of Plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:- Internal Colouring - Plastic emulsion paint - 3 Coats Third Floor
1538.89
-
328060.57
... More
IT Tower;Painting to new walls with 2 or more coats of Plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:- Internal Colouring - Plastic emulsion paint - 3 Coats Second Floor
1418
-
302289.24
... More
IT Tower;Painting to new walls with 2 or more coats of Plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:- Internal Colouring - Plastic emulsion paint - 3 Coats First Floor
713.05
-
152008
... More
IT Tower;Painting to new walls with 2 or more coats of Plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:- Internal Colouring - Plastic emulsion paint - 3 Coats Ground Floor
268.1
-
57154.41
... More
IT Tower;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorge charges,sales & other taxes except GST on all materials, and all operational & incidental charges including cost and conveyance of all materials to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete, including overheads & contractors profit for finished item of work. (SS 901,903 & 904) Fourth Floor
1531.16
-
1024325.06
... More
IT Tower;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorge charges,sales & other taxes except GST on all materials, and all operational & incidental charges including cost and conveyance of all materials to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete, including overheads & contractors profit for finished item of work. (SS 901,903 & 904) Third Floor
1538.89
-
949544.76
... More
IT Tower;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorge charges,sales & other taxes except GST on all materials, and all operational & incidental charges including cost and conveyance of all materials to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete, including overheads & contractors profit for finished item of work. (SS 901,903 & 904) Second Floor
1418
-
801319.55
... More
IT Tower;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorge charges,sales & other taxes except GST on all materials, and all operational & incidental charges including cost and conveyance of all materials to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete, including overheads & contractors profit for finished item of work. (SS 901,903 & 904) First Floor :
713.05
-
365912.34
... More
IT Tower;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorge charges,sales & other taxes except GST on all materials, and all operational & incidental charges including cost and conveyance of all materials to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete, including overheads & contractors profit for finished item of work. (SS 901,903 & 904) Ground Floor
268.1
-
125030.3
... More
IT Tower;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls. Fourth Floor
1531.16
-
1076710.24
... More
IT Tower;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls. Third Floor
1538.89
-
1010382.97
... More
IT Tower;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls. Second Floor
1418
-
864926
... More
IT Tower;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls. First Floor
713.05
-
401691.98
... More
IT Tower;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls. Ground Floor
268.1
-
132539.89
... More
IT Tower;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) Fourth Floor
920.09
-
246224.75
... More
IT Tower;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) Third Floor
920.09
-
227519.36
... More
IT Tower;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) Second Floor
934.04
-
212009.31
... More
IT Tower;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) First Floor
934.04
-
193048.21
... More
IT Tower;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) Ground Floor
268.1
-
52639.54
... More
IT Tower;Autoclaved Concrete blocks masonry of size 600X200X100 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Fourth Floor
21.61
-
192430.3
... More
IT Tower;Autoclaved Concrete blocks masonry of size 600X200X100 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Third Floor
31.26
-
268414.49
... More
IT Tower;Autoclaved Concrete blocks masonry of size 600X200X100 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Second Floor
23.48
-
194053.89
... More
IT Tower;Autoclaved Concrete blocks masonry of size 600X200X100 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges First Floor
29.08
-
231079.43
... More
IT Tower;Autoclaved Concrete blocks masonry of size 600X200X100 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Ground Floor
14.97
-
114917.1
... More
IT Tower;Architectural Autoclaved Concrete blocks masonry of size 600X200X200 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Fourth Floor
213.54
-
1902906.73
... More
IT Tower;Architectural Autoclaved Concrete blocks masonry of size 600X200X200 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Third Floor
193.11
-
1659029.53
... More
IT Tower;Architectural Autoclaved Concrete blocks masonry of size 600X200X200 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Second Floor
210.04
-
1737252.31
... More
IT Tower;Architectural Autoclaved Concrete blocks masonry of size 600X200X200 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges First Floor
81.21
-
645700.02
... More
IT Tower;Architectural Autoclaved Concrete blocks masonry of size 600X200X200 mm in CM 1:6 of comprehensive strength of 3 N/mm², including cost and conveyence of all materials light cement, sand, Autoclaved Concrete Blocks, water to work site all including and operational charges, labour charges, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work.Excluding GST & Seignoriage charges Ground Floor
97.03
-
745393.62
... More
IT Tower;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials to work site, seigniorage charges, all incidental and operational charges, all labour charges, all taxes, curing, etc. complete for finished item of work. Fourth Floor
4.95
-
18356.87
... More
IT Tower;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials to work site, seigniorage charges, all incidental and operational charges, all labour charges, all taxes, curing, etc. complete for finished item of work. Third Floor
4.95
-
17580.6
... More
IT Tower;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials to work site, seigniorage charges, all incidental and operational charges, all labour charges, all taxes, curing, etc. complete for finished item of work. Second Floor
4.95
-
16804.27
... More
IT Tower;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials to work site, seigniorage charges, all incidental and operational charges, all labour charges, all taxes, curing, etc. complete for finished item of work. First Floor
4.95
-
16027.95
... More
IT Tower;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials to work site, seigniorage charges, all incidental and operational charges, all labour charges, all taxes, curing, etc. complete for finished item of work. Ground Floor
6.78
-
20873.26
... More
IT Tower;Providing, supplying and sealing of pipe outlets,shafts,openings of required dia.outlets at all floor levels by using M.S. angle iron frame around the shaft using necessary mechanical equipments,tools and rackles etc complete. The base shall be covered with M.S.chequered plate and filled with 50mm thk. screed concrete as per drawings and as directed by the Engineer-in-charge.
29.95
-
148232.7
... More
IT Tower;Providing and fixing in position the PVC coated Rungs of size 300x150mm for OH Tank including placing 150mm inside concrete (while doing form work), aligning during concreting, grouting the junction if required, cleaning etc.,
88
-
24200
... More
IT Tower;Miscellaneous Items Providing and fixing in position single component, self sealing water swelling bars made up of flexible polymer composites at construction joints of retaining walls and water retaining structures like OHT etc., and wherever specified with proper overlaps at joints of approved makes as per consultants approval
320.3
-
158548.5
... More
IT Tower;Providing and laying 75mm thick (average) M20 grade concrete protection screed mixed with Water proofing admixture conplast WL of Fosroc make or equivalent as per manufacturers specifications approved by consultants. Concrete shall laid be in panels along with polypropylene fibres( 0.90kg/Cum), 12mm and down size aggregates and coarse sand over waterproofing to proper Slopes including top surface shall be finished with 12mm thick waterproof plaster with CM 1:3. The groves to be made about 6mmX10mm size at 5mX5m intervals including filling the same with weather resistant sealent like (Colpor - 200 from Fosroc chemicals or (Pidilite / Fosroc / BASF / Asian Paints or equivalent). Measurements shall be considered as floor area only.
913.2
-
1287234.54
... More
IT Tower;Podium Slab - Hardscape Area Preparation of the concrete surface by mechanical means (mechanical Grinding) to ensure a good bond between the coating and the substrate. Supplying and applying High Build Elastomeric waterproofing Membrane based on pure polyurethane, cold applied of spray / brush applied single component membrane which is root resistant with minimum elongation of 600% as per ASTM D 412 and the system includes final base preparation, and applying Dr. Fixit Flexi PU 270(I) in two coats with solid content not less than 90% applied @ 2.2kg/M2. The required thickness of 1.50 mm and the mixing, composition, proposition etc shall be as per Manufacturere specifications and approved by consultants.. The proportioning equipment utilized must be capable of supplying correct pressure and heat for the appropriate hose length on a consistent basis. Supply and spreading 120 gsm Geotextile (non woven polyester), Providing ancillary products and finish complete as per the vendors methodology approved by consultants. Cost to include the treatment along wall upto 300mm height in the parapet wall. Approved make of Products are Dr. Fixit Flexi PU 270(I) or equivalent.
913.2
-
954294
... More
IT Tower;Providing and fixing of High compressive strength ( not less 200Mpa ) Dimple Board of 8mm thick over the entire membrane. Approved make of Products are HYFLUX / Tikidan / Delta MS or approved Equialant make.
200
-
77000
... More
IT Tower;Providing and laying 75mm thick (average) M20 grade concrete protection screed mixed with Water proofing admixture conplast WL of Fosroc make or equivalent as per manufacturers specifications approved by consultants. Concrete shall laid be in panels along with polypropylene fibres( 0.90kg/Cum), 12mm and down size aggregates and coarse sand over waterproofing to proper Slopes including top surface shall be finished with 12mm thick waterproof plaster with CM 1:3. The groves to be made about 6mmX10mm size at 5mX5m intervals including filling the same with weather resistant sealent like (Colpor - 200 from Fosroc chemicals or (Pidilite / Fosroc / BASF / Asian Paints or equivalent). Measurements shall be considered as floor area only.
200
-
281917.33
... More
IT Tower;Podium Slab Landscape Area Providing waterproofing for podium by following methods as per the specifications listed below with a minimum guarantee period of 10 years and Testing of treatment as per the requirements. Preparation of the concrete surface by mechanical means (mechanical Grinding) to ensure a good bond between the coating and the substrate. Supplying and applying High Build Elastomeric waterproofing Membrane based on pure polyurethane, cold applied of spray / brush applied single component membrane which is root resistant with minimum elongation of 600% as per ASTM D 412 and the system includes final base preparation, and applying Dr. Fixit Flexi PU 270(I) in two coats with solid content not less than 90% applied @ 2.2kg/M2. The required thickness of 1.50 mm and the mixing, composition, proposition etc shall be as per Manufacturere specifications and approved by consultants.. The proportioning equipment utilized must be capable of supplying correct pressure and heat for the appropriate hose length on a consistent basis. Supply and spreading 120 gsm Geotextile (non woven polyester), Providing ancillary products and finish complete as per the vendors methodology approved by consultants. Cost to include the treatment along wall upto 300mm height in the parapet wall. Approved make of Products are Dr. Fixit Flexi PU 270(I) or equivalent. Assuming Landscaping at Ground Floor
200
-
209000
... More
IT Tower;The first part consists of application of first layer of micro fibre reinforced polymer modified white cementetious two part waterproof coating after base preparation of cleaning, brushing and removal of flaky materials. Grouting the porous area with cementetious grout, fixing of weep holes, Grouting of pipe outlets etc. Applying in two coats @ 750 gms/M2/Coat, the coatings shall be applied at intervals and as per the manufacturer?s specifications. Cost to include the treatment of walls up to the full height. Measurements shall be accounted for the full height of the walls treated.( Pidilite / Fosroc / Lagreens / BASF / Asian Paints or equivalent) The second part consists of waterproofing to internal surfaces by 12mm thk In CM 1:4 for walls with waterproofing admixtures Izonil as per manufacturer's specifications and consultants approval, curing etc. complete. Cost to include necessary grouting of porous areas, watta at the junction of floor and walls, termination at the ends etc, complete. ( Pidilite / Lagreens or equivalent) Walls
850
-
748000
... More
IT Tower;UG SUMP, Lift pits, OHT, STP & Swimming pools. Providing waterproofing by Surface method INTERNALLY for Floor & Walls by following methods with min. 10 years guarantee. The first part consists of application of first layer of micro fibre reinforced polymer modified white cementetious two part waterproof coating after base preparation of cleaning, brushing and removal of flaky materials. Grouting the porous area with cementetious grout, fixing of weep holes, Grouting of pipe outlets etc. Applying in two coats @ 750 gms/M2/Coat, the coatings shall be applied at intervals and as per the manufacturer?s specifications. Cost to include the treatment of walls up to the full height. Measurements shall be accounted for the full height of the walls treated.( Pidilite / Fosroc / Lagreens / BASF / Asian Paints or equivalent) The second part consists of waterproofing to internal surfaces by 12mm thk In CM 1:4 for walls with waterproofing admixtures Izonil as per manufacturer's specifications and consultants approval, curing etc. complete. Cost to include necessary grouting of porous areas, watta at the junction of floor and walls, termination at the ends etc, complete. ( Pidilite / Lagreens or equivalent) Floors
200
-
165000
... More
IT Tower;The second part consists of surface method in two layers in CM 1:4 of thickness 35mm for floor, 25mm for walls till floor level and 18mm till 300mm above floor level with water proof admixture as per Manufacturer's specification approved by consultants. Note: Plan area shall be the mode of measurement.
531.91
-
292549.95
... More
IT Tower;Providing waterproofing for the Toilets / Balconies / Utilities, in two parts, by Surface method as follows. Note: Plan area shall be the mode of measurement Providing and application of Two component acrylic polymer modified cementitious flexible waterproof coating, after base preparation of cleaning, brushing and removal of flaky materials, grouting the porous area with cementatious grout, fixing of weep holes, Grouting of pipe outlets etc. The coatings shall be applied at intervals and as per the manufacturer?s specifications and approved by consultants. NOTE: Cost to include the treatment along wall up to minimum 300mm and mode of measurement shall be only surface Plan area shall be considered and necessary shop drawings shall be submitted by contractor for consultants approval prior to execution. Approved makes from ( Pidilite / Fosroc / Lagreens / BASF / Asian Paints or equivalent)
531.91
-
263294.96
... More
IT Tower;Providing and laying 75mm thick (average) M20 grade concrete protection screed mixed with Water proofing admixture conplast WL of Fosroc make or equivalent as per manufacturers specifications approved by consultants. Concrete shall laid be in panels along with polypropylene fibres( 0.90kg/Cum), 12mm and down size aggregates and coarse sand over waterproofing to proper Slopes including top surface shall be finished with 12mm thick waterproof plaster with CM 1:3. The groves to be made about 6mmX10mm size at 5mX5m intervals including filling the same with weather resistant sealent like (Colpor - 200 from Fosroc chemicals or (Pidilite / Fosroc / BASF / Asian Paints or equivalent). Measurements shall be considered as floor area only.
2820.69
-
4409544.71
... More
IT Tower;Preparation of the concrete surface by mechanical means (mechanical Grinding) to ensure a good bond between the coating and the substrate. Supplying and applying High Build Elastomeric waterproofing Membrane based on pure polyurethane, cold applied of spray / brush applied single component membrane which is root resistant with minimum elongation of 600% as per ASTM D 412 and the system includes final base preparation, and applying Dr. Fixit Flexi PU 270(I) in two coats with solid content not less than 90% applied @ 2.2kg/M2. The required thickness of 1.50 mm and the mixing, composition, proposition etc shall be as per Manufacturere specifications and approved by consultants.. The proportioning equipment utilized must be capable of supplying correct pressure and heat for the appropriate hose length on a consistent basis. Supply and spreading 120 gsm Geotextile (non woven polyester), Providing ancillary products and finish complete as per the vendors methodology approved by consultants. Cost to include the treatment along wall upto 300mm height in the parapet wall. Approved make of Products are Dr. Fixit Flexi PU 270(I) or equivalent.
2820.69
-
2947619.48
... More
IT Tower;WATERPROOFING FOR WALLS OF RETAINING WALL, DRAINS, BASEMENT COLLECTION SUMPS, TRENCHES, STPS, UG SUMP, ROOF TOP COLLECTION & DEWATERING SUMP. Providing and application of waterproofing treatment to the entire quantity of the concrete for Retaining Walls, UG Sump Walls, Collection sump walls & STP Walls with Whitetank Concrete System consisting catalytic effective Hydrophilic mechanism conforming compressive strength to class R3 & R4 category. using Admix having resistance to 20 bar hydrostatic water head @ 0.8 % by weight of cementatious content. Catalyst Crystaline waterproofing treatment to construction joints / cold joints of the Grade slab and at the junctions of Grade slab with the retaining walls etc by making of U shape groove (25mm x 25mm) should fill with repair mortar and with premier and finishing coat & honycomb area as per the manufacturer's specifications and as detailed in technical specification, complete work and methodology approved by Consultants. ( Test certificates shall be provided by the manufacturer. Approved makes Penetron).
180
-
247500
... More
IT Tower;WATERPROOFING FOR BASEMENT GRADE SLAB, DRAINS, TRENCHES, RAFT OF RETAINING WALL, WATER RETAINING STRUCTURES-UG SUMP/COLLECTION SUMPS/STP. Providing and application of waterproofing treatment to the entire quantity of the concrete for Basement Grade Slab, drains, trenches & Raft of Retaining wall / UG Sumps / Collection sumps / STP with Whitetank Concrete System consisting catalytic effective Hydrophilic mechanism conforming compressive strength to class R3 & R4 category. using Admix having resistance to 20 bar hydrostatic water head @ 0.8 % by weight of cementatious content. Catalyst Crystaline waterproofing treatment to construction joints / cold joints of the Grade slab and at the junctions of Grade slab with the retaining walls etc by making of U shape groove (25mm x 25mm) should fill with repair mortar and with premier and finishing coat & honycomb area as per the manufacturer's specifications and as detailed in technical specification, complete work and methodology approved by Consultants. ( Test certificates shall be provided by the manufacturer. Approved makes Penetron).
130
-
171600
... More
IT Tower;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126) Fourth Floor
100
-
8604836.53
... More
IT Tower;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126) Third Floor
100
-
8442457.97
... More
IT Tower;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126) Second Floor
100
-
8280079.42
... More
IT Tower;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126) First Floor
100
-
8117700.86
... More
IT Tower;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126) Ground floor
155
-
12330749.56
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Basement water collection Sumps 200 mm thick side walls
37
-
106596.52
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic and Fire Fighting Overhead tank 200 mm thick side walls
61.28
-
176556.62
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic, Fire Fighting UG Sumps 300 mm thick RCC walls
65.24
-
236347.56
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RCC Brackets/Fins/Ledges at all levels Fourth Floor
2.25
-
31624.09
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RCC Brackets/Fins/Ledges at all levels Third Floor
2.25
-
30835.51
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RCC Brackets/Fins/Ledges at all levels Second Floor
2.25
-
30043.85
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RCC Brackets/Fins/Ledges at all levels First Floor
2.25
-
27283.86
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Chejjas/Lofts Fourth Floor
5.39
-
17522
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Chejjas/Lofts Third Floor
5.55
-
17164.36
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Chejjas/Lofts Second Floor
5.69
-
16705.18
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Chejjas/Lofts First Floor
5.46
-
15158.94
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels Fourth Floor
6.26
-
88041.46
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels Third Floor
6.26
-
85846.05
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels Second Floor
6.26
-
83642.06
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels First Floor
6.26
-
75958.27
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Retaining Walls RCC Parapet / upstand at all levels of specified thickness
47.52
-
172789.83
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Retaining Walls Ground Floor
69.78
-
252794.53
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Basement water collection Sumps. Top Slab 200 mm thick
11.74
-
20819.58
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Basement water collection Sumps. Bottom Slab 250 mm thick
15.61
-
32243.09
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic and Fire Fighting Overhead tanks. Top Slab 200 mm thick
27.46
-
48701.39
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic and Fire Fighting Overhead tanks. Bottom Slab 250 mm thick
27.46
-
56707.03
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic, Fire Fighting UG Sumps Top Slab 200 mm thick
117.19
-
257304.15
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Domestic, Fire Fighting UG Sumps Bottom Slab 450 mm thick
146.38
-
472989.22
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Terrace
112.5
-
247006.71
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Fourth Floor
337.5
-
722027.63
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Slab Third Floor
337.5
-
703495.26
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Slab Second Floor
337.5
-
684962.9
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Slab First Floor
337.5
-
612447.43
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Slab Approach Staircase from GF to FF
497.48
-
882291.43
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm thick Waist Slab Ground Floor
112.5
-
199523.16
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Staircase 150 mm thick Slab Ground Floor
2680.2
-
3925161.87
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Above Terrace
14.54
-
186302.4
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Terrace
158.08
-
1971763.94
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Fourth Floor
157.11
-
1911670.65
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Third Floor
167.98
-
1992064.51
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Second Floor
157.49
-
1819552.13
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams First Floor
312.85
-
3466605.35
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Beams Ground Floor
146.07
-
1613562.58
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm Thick Slab Terrace Floor
36.75
-
80688.86
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm Thick Slab Fourth Floor
36.75
-
78620.79
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm Thick Slab Third Floor
37.26
-
77675.26
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 mm Thick Slab Second Floor
36.24
-
73540.66
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 125 mm Thick Slab Terrace Floor
410.08
-
711634.69
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 125 mm Thick Slab Fourth Floor
410.08
-
689676.02
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 125 mm Thick Slab Third Floor
500.11
-
813625.83
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 125 mm Thick Slab Second Floor
369.43
-
581246.85
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 125 mm Thick Slab First Floor
1228.49
-
1662148.13
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)135 mm Thick Slab Terrace Floor
663.77
-
1190586.93
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)135 mm Thick Slab Fourth Floor :
663.77
-
1155043.64
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)135 mm Thick Slab Third Floor
651.13
-
1097288.8
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)135 mm Thick Slab Second Floor
651.13
-
1062422.52
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)135 mm Thick Slab First Floor
552.78
-
780144.05
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Above Terrace
160.42
-
294836.67
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Terrace Floor
162.88
-
306390.93
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Fourth Floor :
162.88
-
297668.81
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Third Floor :
137.81
-
244298.55
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Second Floor :
148.96
-
256077.89
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 150 mm Thick Slab First Floor :
270.14
-
404875.06
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and admixture @ 0.4% of cement (super plasticizer conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 175 mm Thick Slab First Floor :
54.84
-
91141.43
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Terrace Floor
12.62
-
110646.63
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Fourth Floor
10.09
-
87815.49
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Third Floor
10.09
-
87113.67
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Second Floor
10.09
-
86411.85
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) First Floor
10.09
-
85710.03
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Ground Floor
10.09
-
85710.03
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Core Walls Below Ground Floor
7.57
-
64282.53
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Terrace Floor
24.59
-
215605.47
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Fourth Floor
68.29
-
594085.59
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Third Floor
68.29
-
589337.69
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Second Floor
68.29
-
584589.78
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) First Floor
68.29
-
579841.88
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Ground Floor
68.29
-
579841.88
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Shear Walls Below Ground Floor
49.91
-
423794
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Terrace Floor
2.27
-
33661.09
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Fourth Floor :
46.89
-
674805
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Third Floor :
46.89
-
653818.24
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Second Floor :
48.25
-
651064.29
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) First Floor :
46.04
-
560114.77
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Ground Floor
76.43
-
920516.97
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns Below Ground Floor
57.32
-
690387.73
... More
IT Tower;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) DG, Chillers, Pedestals, Pump & Transfo Foundations
62.4
-
473998.64
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Retaining Walls
57.72
-
453743.19
... More
IT Tower;Supply and placing of the Design Mix Concrete M 35 grade corresponding to IS 456 with minimum cement content of 420 kgs per 1 cum of concrete and Admixture @ 0.4% of cement (Super pasticizer Conflow SNS 2 or equivalent) using Batching Plant at site with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings
1016.33
-
7989616.15
... More
IT Tower;Plum Cement Concrete (1:5:10) nominal mix using 40mm size machine crushed hard granite metal and 150mm boulders in (60:40) ratio from approved quarry including cost and conveyance of all materials like cement, manufactured sand, coarse aggregate, water etc. to site, seignorge charges,sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit,all taxes except GST etc.,for finished item of work along the triangle area of Lift Pits & undulation areas dur to rock blasting.
146.25
-
603373.39
... More
IT Tower;Plain Cement Concrete (1:3:6) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
387.75
-
2319504.99
... More
IT Tower;Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc as per the approval of the Engineer-in-Charge etc., complete ,including over haeads and conractor's profit,all taxes except GST for finished item of work .
2977.48
-
514181.88
... More
IT Tower;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
9768.75
-
1848540.28
... More
IT Tower;Earth work excavation in ordinary rock (requiring blasting) for foundations and depositing the rock as directed by the Engineer-in-charge during execution by Mechanical Means for all lifts and with an initial lead of 10m including all operational, incidental and labour charges such as shoring, sheeting, planking, strutting, all taxes etc. complete for finished item work excluding dewatering charges etc., complete.
1751.62
-
1380962.57
... More
IT Tower;Earth work excavation for foundations by Mechanical Means for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
1946.25
-
204920.66
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements