Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 29,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
244395Bid Award Id
ViewTender No
03/CE/TSIIC/2021-22, Dated:07.06.2021Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Factory Sheds Maheshwaram;Supply and transportation of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection =10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj / VIN / Havells/Capart(Premium) /Halonix/Keselec/HPL/Jaquar b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
1
-
8884.69
Factory Sheds Maheshwaram;Supply and fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection = 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG
32
-
254352.17
Factory Sheds Maheshwaram;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick,base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent.Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete. Makes:Bajaj/Valmont /Transrail/Utkarsh/ Skipper/ Laasma.
32
-
693724.1
Factory Sheds Maheshwaram;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Finolex/Havells/KEI c) 3.5 Core x 2.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete.
120
-
19440
Factory Sheds Maheshwaram;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Finolex/Havells/KEI b) 4C x 16sqmm AYFY cable ( for jockey pump & booster pumps)
140
-
55020
Factory Sheds Maheshwaram;Supplying, laying installation testing and commissioning of following 1.1KV cables along with end termination with double compression type cable gland and heavy duty tinned copper cable sockets as per the relevant IS standards. Rate shall be inclusive cable,and all sundry materials like adhesive tape , PVC sleeves , bolts and nuts, washers etc. including plugging unused holes. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes:Polycab/RR Kabel/Finolex/Havells/KEI a) 3.5C x 185.sqmm AYFY cable ( to main pump )
200
-
356600
Factory Sheds Maheshwaram;Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.
200
-
18200
Factory Sheds Maheshwaram;Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.MAKE: HGURU / FIEBIG and Approved makes
12
-
8592
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning of G.M. Non-return valves 15mm dia conforming to IS 778 including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT
4
-
11360
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning of G.M. Non-return valves 25mm dia conforming to IS 778 including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT
4
-
11360
Factory Sheds Maheshwaram;Supply, installation, testing and commissioning of 25mm dia Gate valve including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Zoloto / Leader / Approved makes
8
-
10000
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning C.I. Non-return valve conforming to IS : 5312 with flanged ends (heavy) tested to 250 psi hydraulic pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open ands hut position as per fire practice etc complete. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT b) 80mm dia
4
-
68168
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning C.I. Non-return valve conforming to IS : 5312 with flanged ends (heavy) tested to 250 psi hydraulic pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open ands hut position as per fire practice etc complete. including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes:KIRLOSKAR / ZOLOTO / SANT a) 100mm dia
8
-
199960
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning Cast Iron Body Sluice valve PN 1.6 Non-rising stem type conforming to IS:780, with flanged ends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Make:KIRLOSKAR / ZOLOTO / SANT b) 100mm dia
4
-
59080
Factory Sheds Maheshwaram;Supplying, installation testing and commissioning Cast Iron Body Sluice valve PN 1.6 Non-rising stem type conforming to IS:780, with flanged ends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Make:KIRLOSKAR / ZOLOTO / SANT a) 150mm dia
8
-
163608
Factory Sheds Maheshwaram;Supplying , installation , testing and commissioning of electric driven pressurisation / Jockey pump suitable for automatic operation and consisting of following :complete in all respect as required a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 -100 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens/ ABB/ Kirloskar
4
-
436280
Factory Sheds Maheshwaram;Supplying , installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at specified flow of 2850 lpm at 100 Mtr head conforming to IS1520 b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick alluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Engines : Kirloskar / Cummins. Makes of Pumps : Kirloskar / Mather&Platt
4
-
3213032
Factory Sheds Maheshwaram;Supplying & installing completely testing & commissioning of electrically Driven End suction and back pull out pump with cast iron casing & bronze or phosphor bronze internal parts, for fire duty, complete with coupling guard necessary RCC foundation,capable of discharging 2850 lt/min against 100 metre head at 10 bar against all losses complete electrically operated TEFC 3-ph, 440-V, 50 Hz, 2900 RPM motor of ?F? class winding, make as approved by TAC with automatic direct on line starter complete with single phasing preventor & No volt release common base plate, foundation bolts, suitable cable entry gland box for A-AL cable (95 sq.mm) pressure guages & wired for automatic start of the water pump on drop of pressure in the wet riser/ hydrant and sprinkler system. The motor starter and pump should confirm & and IE Regulations. The pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head.(Main Hydrant Pump and sprinkler) Makes of Pumps: Kirloskar / Mather&Platt. Makes of Motors: Siemens/ ABB/ Kirloskar/Mather&Platt
4
-
1936000
Factory Sheds Maheshwaram;Supply, installation, testing and commissioning of 25 / 20mm dia Air Release Valve for finished item of work as per the instructions of engineer in charge.Make:RB / TBS / VB
4
-
5316
Factory Sheds Maheshwaram;Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve. a) 100mm dia
4
-
20224
Factory Sheds Maheshwaram;Providing, installation, testing and commissioning of dual plate non - return valve of 100mm dia size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.
4
-
37948
Factory Sheds Maheshwaram;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes c) 80mm dia
80
-
98160
Factory Sheds Maheshwaram;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes b) 100mm dia
160
-
300640
Factory Sheds Maheshwaram;Providing , laying, testing & Commissioning of following classes MS C class pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete.tapers, nuts, bolts, gaskets etc., complete including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Makes : Jindal / Hissar / Tata pipes a) 150mm dia
1400
-
4123000
Factory Sheds Maheshwaram;Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / Approved makes
4
-
2772
Factory Sheds Maheshwaram;Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Make: Eversafe/ Reliance/ Newage/ SRI, b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Safex.c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
20
-
152240
Factory Sheds Maheshwaram;Supplying , fixing and testing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gunmetal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required for finished item of work as per the instructions of engineer in charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
20
-
50000
Factory Sheds Maheshwaram;Supplying , fixing and testing of 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required for finished item of work as per the instructions of engineer in charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
40
-
255880
Factory Sheds Maheshwaram;Supplying , fixing and testing of of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to branch pipe, mounted on wall OR raised brick platform accommodate 2 Nos 15 mtr long Hose pipe, 1 No and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required for finished item of work as per the instructions of engineer in charge. Make: Mini Max / Safex / Newage / Winco / Padmini.
20
-
64760
Factory Sheds Maheshwaram;Supplying and fixing Single headed Internal/External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required including accessories such as Flange, Nuts, Bolts, Washers, Gasket, suitable bends including Labour and transportation cost for finished item of work as per the instructions of engineer in charge.Make: Mini Max / Safex / Newage / Winco / Padmini.
20
-
261260
Factory Sheds Maheshwaram;Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.
40
-
55000
Factory Sheds Maheshwaram;Providing fire bucket ( fabricated from 20SWG MS sheet ) filled with sand complete including painting with white colour inside & Red out side and Letter "FIRE" in black out side as approved by Engineer-in Charge with all contractors material, labour, transportation, lead & lift etc. complete including cost of incidental charges for successful completion of work as per specifications and as directed by Engineer-in-charge. at site.
80
-
120000
Factory Sheds Maheshwaram;Water CO2 type fire extinguisher 9 lts. Capacity, initial filling in brand new cylinder of powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge & wall mounting bracket / stand etc. complete confirming to IS:15683.
40
-
160000
Factory Sheds Maheshwaram;Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete. Makes : Cease Fire / Minimax
80
-
881680
Factory Sheds Maheshwaram;Supply installation testing and commissioning of ABC type Fire Extinguisher of 6kg, fitted with discharge control valve ( squeeze grip type ) , inside STORED PRESSURE with ISI mark, with discharge hase and open nozzel overall conforming to IS: 15683 with ISI mark along with wall bracket and initial refilling at site . Fire Rating 2A.Makes : Cease Fire / Minimax
120
-
872520
Factory Sheds Maheshwaram;Supply Installation testing and commissioning of 4 MIC with all accessories.
4
-
27268
Factory Sheds Maheshwaram;Supply installation testing and commissioning of amplifier with inbuilt 240watts amplifier with emergency microphone along with all interconnections suitable to integrate with fire alarm panel. Make:Honeywell/Bosh/Phillips
4
-
113616
Factory Sheds Maheshwaram;Supply, Installation, testing and commissioning shielded twin twisted pair 1.0 sqmm cable in existing conduit ( Shall be on actuals ).Make:Polycab/RR Kabel/Finolex
4000
-
208000
Factory Sheds Maheshwaram;PUBLIC ADDRESS SYSTEM Supply and installation testing and commissioning of 6Watt 180mm dia recessed/ surface mounted white color speakers (along with junction boxes to be used in no false ceiling area). Make:Honeywell/Bosh/Phillips
40
-
54520
Factory Sheds Maheshwaram;Supply and laying of 4 Core x 2.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete. Make-Polycab/Finolex
80
-
11600
Factory Sheds Maheshwaram;Supply and laying of 2 Core x 1.5Sqmm FRLS armoured copper cable as per IS. 7098 / Part-I / 1988 including all taxes etc., complete. Make-Polycab/Finolex
4000
-
212000
Factory Sheds Maheshwaram;Supply and Installation of Intalligent analogue addressable fault isolator modules including the cost of mounting accessories complete as per specifications and complete as required. Makes: Notifier / Edwards
4
-
13988
Factory Sheds Maheshwaram;Supply and fixing of Exit Light fixtures with 1.5hrs battery backup
20
-
102860
Factory Sheds Maheshwaram;Supply, Installation, testing and commissioning of addressable analogue manual call point with resetable flexible element to initiate alaram including the cost of mounting accessories etc. complete. Makes: Notifier / Edwards
20
-
82100
Factory Sheds Maheshwaram;Supply and fixing of addressable wall mounting strobes cum hooters including the cost of mounting accessories complete as per specifications and as required including testing and commissioning. Makes: Notifier / Edwards
20
-
85580
Factory Sheds Maheshwaram;Supply, Installation, testing and commissioning of UL Listed 1 loop micro processor based analog addressable fire control panel expandable by minimum 2 additional loops with minimum 160 character LCD display 4 access levels 1000 events, historical logging, flash E-PROM, 240 volts A C Power supply, automatic battery charger, 24V SLA batteries suitable for operating the entire system including tack back units and the hooters/strobes for a minimum of 4 hours in battery condition the panel shall have suitable power amplifiers for hooter / strobes the panel shall be capable beeing integrated with the BMS system and shall include cost of supply, installation of any additional modules or interfaces required for the same. The panel shall be completed as per the specification and as required for fixing of above Micro processor based Fire Alarm control panel with zonal indictions and battery back up as per detailed specifications.Makes: Notifier / Edwards / Honeywell / Morley IAS /Bosch / Honeywell / Morley IAS / Bosch/ Morley IAS
4
-
818028
Factory Sheds Maheshwaram;Supply, Transportation, erection and commissioning (including Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 500 KVA out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per Latest CPCB norms etc as per following specifications mentioned below.A. Alternator : The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.Make : Kirloskar / Stamford / Crompton Greaves / Leroy/Somer.B.Diesel Engine : Diesel Engine start, developing suitable 580 BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 500 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. Make : Kirloskar / Cummins / Mahindra & Mahindra / Greaves . 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following. 01. Voltmeter with selector switch. 02. 4 Pole MCCB incomer of 320 A rating of Schenieder / L&T make for EB and DG .03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of L&T make. 11. Main supply air break contactor of L&T make. 12. Audio Visual announciation . 13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons.14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
1
-
3945706.93
Factory Sheds Maheshwaram;Supply & Installation of 4nos 9lts capacity round bottom sand buckets along with bucket sand, fire buckets with round bottom type enamel painted white inside and red outside and letter fire in black outside and handle with mounting bracket along with suitable MS Stand to install the buckets all as per EB Standard
4
-
15251.68
Factory Sheds Maheshwaram;Supply & Installation of switch yard fencing with MS Grill, Door , Pedestal, brick masonry, 40mm metal etc. all as per EB Standard
100
-
100000
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. Supply & Installation Rubber mat of 10mm thick with 15KV voltage 1mtr x 3mtr tested in Electrical rooms
20
-
60000
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. Shock Treatment chart as approved by EB and framed and hung in a predominent position
8
-
20000
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. Danger Board in 3 languages English/Telugu/Hindi in red colour with 440V marks.
8
-
6400
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. Danger Board in 3 languages English/Telugu/Hindi in red colour with 11KV marks.
8
-
8000
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. First aid box 18"x12"x8"
4
-
5934.34
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. 415V Gloves
8
-
2117.78
Factory Sheds Maheshwaram;Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required. 11kv Gloves
8
-
2117.78
Factory Sheds Maheshwaram;Supply and Installation of 600mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
1
-
1052.07
Factory Sheds Maheshwaram;Supply and Installation of 300mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
1
-
656.69
Factory Sheds Maheshwaram;Supply, transportation and Installation of 600mm x 75mm x 2mm thick hot dip GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete ISI Make profab or its equivalent.
1
-
1170.69
Factory Sheds Maheshwaram;Supply, transportation and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.ISI Make profab or its equivalent
1
-
644.99
Factory Sheds Maheshwaram;Earth work excavation of Trench in all types of soils covering of laid cables/HDPE pipe filling of Trench duly providing cable route indicators embedded for every 8 mtrs in C.C including labour charges for covering trench etc., complete.
1000
-
336868.47
Factory Sheds Maheshwaram;Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.
10
-
9155.1
Factory Sheds Maheshwaram;Supply and Transportation of Outer dia 78mm and Inner dia 63mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete Makes:DURALINE (Dura Guard) or its equivalent make.
10
-
2258.67
Factory Sheds Maheshwaram;Supply and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete Makes:DURALINE (Dura Guard) or its equivalent make.
100
-
10972.94
Factory Sheds Maheshwaram;Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required. 150mm dia NP2 RCC Hume pipe
50
-
21064.22
Factory Sheds Maheshwaram;Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required. 300mm dia NP2 RCC Hume pipe
100
-
66555.67
Factory Sheds Maheshwaram;Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.
20
-
2444.54
Factory Sheds Maheshwaram;Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 8 SWG GI wire
400
-
9098.29
Factory Sheds Maheshwaram;Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 50x6mm GI strip
240
-
58385.39
Factory Sheds Maheshwaram;Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25x6mm GI strip
400
-
54407.95
Factory Sheds Maheshwaram;Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25x3mm GI strip
400
-
32957.44
Factory Sheds Maheshwaram;Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 50 x 6mm Copper strip
240
-
523223.8
Factory Sheds Maheshwaram;Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25 x 6mm Copper strip
400
-
441773.29
Factory Sheds Maheshwaram;Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25 x 3mm Copper strip
400
-
226640.11
Factory Sheds Maheshwaram;Providing independent CI earthing by connecting a 2.5 Mtr long 100mm. dia C.I. Pipe in an earth pit of 0.6 x0.6x 2.1m filled with salt and charcoal mixed with sand in alternate layers 150 mm each upto a height of 1.7m from bottom. The pipe shall have provision for watering through a funnel. It shall also have provision for connecting 25 x 6 mm GI Flat on two sides. provide 18" hume pipe ring with all accessories and labour charges complete as per IS specification. The cost of digging and back filling shall also be included.
16
-
163187.5
Factory Sheds Maheshwaram;Providing independent earthing for Sophisticated Electronic equipment by excavating a pit of size 0.9X0.9X2.1M in all types of soils with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe connected with reducer of 0.3mm,providing G.I funnel with wiremesh as per National Electric Code and 18" dia hume pipe ring duly providing staggered holes in GI pipe including filling with salt and charcoal in layers and giving earth connections from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
15
-
237534.88
Factory Sheds Maheshwaram;Providing independent earthing for sophisticated elctronic equipment with size 600 mm X 600 mm X 3.15 mm thick G.I plate rigidly fixed to 40mm dia 'B' class GI pipe of 2.7 Mtrs length with necessary accessories by excavating a pit to a depth of 2.4 M in all soils of size 1.0 x 1.0 x 2.4M with hume pipe ring duly providing staggered holes, GI bolts , nuts and washers including filling with proportionate of Salt and Charcoal in layers and giving earth connection from electrode GI strip of 25 x 6 mm x 200mm length with all accessories, all labour charges etc., complete as per IS specification.
35
-
326393.17
Factory Sheds Maheshwaram;Providing independent earthing by excavating a pit of size 0.6X0.6X2.1M in all types of soils with 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with proportionate of Salt and Charcoal in layers giving earth connection from electrode G.I strip of 25mm x6mm x 200mm length with all accessories and hume pipe ring and all labour charges etc., complete
24
-
126276.26
Factory Sheds Maheshwaram;Supply of down conductor of 1x70sqmm single core PVC insulated unarmoured copper conductor cable of ISI mark
400
-
165877.9
Factory Sheds Maheshwaram;Providing earth electrode of low carbon steel rod of 17mm dia coated with 250micron thick copper 3mtr long with clamps and 2 bags of LORESCO ZEROLITE back fill compound etc complete
16
-
269622.03
Factory Sheds Maheshwaram;Supply and installation of electro mechanical counter
8
-
136338
Factory Sheds Maheshwaram;Installtion and commissioning of INE /NIMBUS/FOREND or equivalent advanced lighting protection systems which includes 1. Laying of CC Bed. 2. Installtion of lighting Rod, Counter, earth electrodes, 3. Laying of down conductor 4. Interconnection between the electrodes . 5. Termination of down conductor to earth bus etc complete.
8
-
318485.57
Factory Sheds Maheshwaram;LIGHTNING PROTECTION SYSTEM Supply and installation of NIMBUS CPT-3/NLP 2200/ FOREND(ESE-EU) Advanced lighting protection with capturing head of 135-210mm diameter, 205-580mm height and 4.60-4.940 kgs and having Rod length 760mm, weight 1.795 kgs with stainless steel rod, working ont the principle of ESE Early streamer emission technology , having a coverage radius of 79mts when mounted on 10-15mts height of existing lattice tower giving level 1 protection and anticipation emission time of 60micro seconds / 72 micro seconds. The NIMBUS is manufacturing according to standard NFC 17 102 and UNE 21186-96 including functional integrity etc. complete. Make INE/ NIMBUS/ FOREND
8
-
1036168.8
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 3 Core 2.5 Sqmm Copper cable
1
-
208.01
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 3 Core 6 Sqmm Copper cable
1
-
208.01
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 3 Core 10 Sqmm Copper cable
1
-
208.01
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 4 Core 6 Sqmm alluminium cable
20
-
6250.64
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 4 Core 10 Sqmm alluminium cable
80
-
25002.57
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 4 Core 16 Sqmm alluminium cable
8
-
3045.61
Factory Sheds Maheshwaram;supply and fixing of cable end terminations with single compression brass cable glands and crimping type alluminium lugs for XLPE armoured cable fo the following cable sizes with brass washer etc complete. 3.5 Core 300 Sqmm alluminium cable
32
-
73488.73
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 3 Core 2.5 Sqmm Copper cable
1000
-
131975.18
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 3 Core 6 Sqmm Copper cable
10
-
2228.67
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 3 Core 10 Sqmm Copper cable
10
-
2809.93
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 4 Core 10 Sqmm alluminium cable
1000
-
208279.02
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 4 Core 16 Sqmm alluminium cable
400
-
91037.43
Factory Sheds Maheshwaram;Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells] \Supply, Instalaltion, Testing & Commissioning of XLPE/PVC insulated sheathed steel tape armoured Aluminium UG cable with pvc outer sheathing 1.1 KV class .The cable shall be either laid on existing cable trays or in existing trench. The cable shall be tied with nylon ties on the cable tray and a overlapping 25x3mm GI strip shall be fixed to the cable tray. The cost of the nylon tie shall be included in the cost of installation. This cable shall be directly laid in ground including excavation back filling of earth complete 3.5 Core 300 Sqmm alluminium cable
400
-
750222.57
Factory Sheds Maheshwaram;APFCR Panel 210KVAR Fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard APCR panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat. Fuses shall be provided for Control purposes (All Panels shall be extendable type only). (Makes: L&T/ ABB) INCOMERS 400A 50KA 3Pole MCCB - 1 Nos, Multi function meter with CT 400/5A , class I - 2Nos OUTGOINGS50KVAR Capacitor banks-2 Nos, 25KVAR Capacitor banks-3 Nos, 10KVAR Capacitor banks-3 Nos, 5KVAR Capacitor banks-1 Nos, and suitable Capacitor duty power contactors 125A 25KA TP MCCB-2 Nos, 63A 25KA TP MCCB-3 Nos, 32A 25KA TP MCCB-4 Nos, 12 stage APFC realy with suitable capacitor duty power contactors and LED Phase Indication lamps, 400A aluminium busbars of required size. MS Enclsoure for Each Tenant 125A 16KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I - 2Nos
4
-
763564.7
Factory Sheds Maheshwaram;Main PCC Panel Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type ACB MAKE: Legrand(DMX3) / Schneider(NW) / / L&T(UPOWER OMEGA) / ABB(EMAX PR122) MCCB MAKE: LEGRAND(DPX3), , SCHNEIDER ( COMPACT NSX) , L&T ( DSINE), ABB(TMAX)INCOMERS 800A 50KA 4Pole MCCB - 2 Nos, Multi function meter with CT 630/5A,class I - 2Nos Out goers:400A,3P,50KA MCCB-2Nos, 250A,3P,35KA MCCB-5Nos,125A,3P,25KA MCCB-5Nos, 63A, 3P, 25KA MCCB-5NoTIMER & CONTRACTOR FOR area lightsEach outdoor feeder will have CTs and Metering with indicating lamps LED Phase Indication lamps, 800A aluminium busbars of reuqired size. Dual source meter for EB & DB metering
4
-
2134751.14
Factory Sheds Maheshwaram;Supply and erecting of LT KIOSK with 800A, 4P MCCB with enclosure with suitable for incoming and outgoing bus duct connection provision along with all standard accessories etc. complete as per site requirement.
4
-
391207.3
Factory Sheds Maheshwaram;Supply, transportation and delivery at site of 3 Phase, 50Hz, oil immersed and naturally cooled, outdoor / Indoor type copper wound transformer designed and manufactured as per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 11000V / (433V / 415V) with HV tapping + or - 2.5% contineously rated for full load and temporature rise not exceeding 50°C in oil and 55°C rise by th resistance of the winding after contineous run on full load rating complete with the following standard mountings. Makes: ESSENNAR / VOLTAMP / PETE 1. Rated KVA : 630KVA 2. Service: Outdoor / Indoor 3. Mounting : Plinth. 4. Copper wound : Double. 5. Type : Core. 6. Cooling : ONAN 7. Temp . Rise : 55°C. 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts : 11000 11. Primry Frequency : 50 12.Primary Phases : 3 13. Primary wires: 3 14. Secondary connection : Star 15. Secondary Volts : 415 / 433V 16. Secondary phases : 3 17. Secondary wires: 4 18. Taps on primary winding for primary voltage variation : +7.5% to - 7.5% in steps of 2.5%,19. Terminal arrangement. a. HV: Bare Busings / Cable end box b. LV : Cable box 20. LV : One separate terminal for earthing. 21. Impedance(Z%) : .............As per IS specification22. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Conservator with drain plug. e. Oil level Indicator f. Dehydrating silicagel breather g. Air release device h. Drain cum filter wall i. Explosion vent with diaphragm j. Radiators (Attachable) k. Seperate neutral bushing l. Uni directional flat rollers.
4
-
5661776.29
Factory Sheds Maheshwaram;Supply and erecting of heat shrinkable Indoor termination kit for 11KV XLPE HT cable 3 core 70 Sqmm with Anti Tracking red colour material etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.
16
-
192527.43
Factory Sheds Maheshwaram;Supply and erecting of heat shrinkable Outdoor termination kit for 11KV XLPE HT cable 3 core 70 Sqmm with Anti Tracking red colour material etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.
24
-
420139.18
Factory Sheds Maheshwaram;Supply and laying of 3 Core 11KV 70 Sqmm HT XLPE (E) armoured Cable , as per IS specification confirming to IS 7098/II/85 with latest ammendments including labour charges etc complete.[Makes: Universal / Polycab/Havells].
400
-
414800.18
Factory Sheds Maheshwaram;Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc complete for finished item of work.a) Load break switch: 11KV,630A, 25 KA with fuse trip,earth switch, manually operated spring hargesd mechanis with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push buttion. Make Megawin/Pentagon/ Venkateshwara/Jyothi.
5
-
720250.93
Factory Sheds Maheshwaram;Double Pole structure: Supply , Fabrication, Transportation and fixing of Double pole structures with Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMBModified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete. as per EB drawing and approval.
4
-
329937.96
Factory Sheds Maheshwaram;WATER SUPPLY PIPE LINES Supplying, fixing of CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes etc, Excluding GST.. complete for finished item of work as directed by the Engineer-In- Charge. Supplying, fixing of 28.60 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc, Excluding GST.. complete for finished item of work as directed by the Engineer-In- Charge.
64
-
15269.76
Factory Sheds Maheshwaram;WATER SUPPLY PIPE LINES Supplying, fixing of CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes etc, Excluding GST.. complete for finished item of work as directed by the Engineer-In- Charge. Supplying, fixing of 22.20 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc, Excluding GST.. complete for finished item of work as directed by the Engineer-In- Charge.
120
-
23859.6
Factory Sheds Maheshwaram;WATER SUPPLY PIPE LINES Supplying, fixing of CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes etc, Excluding GST.. complete for finished item of work as directed by the Engineer-In- Charge. Supplying, fixing of 15.90 mm OD CPVC SDR 11 pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge.
32
-
5235.52
Factory Sheds Maheshwaram;Supplying of PVC/SWR Pipe Clip of dia 160 mm including cost and conveyance of all materials Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors but Excluding GST.etc complete for finished item of work.
80
-
3181.6
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Pipe Clip of dia 75 mm
40
-
681.6
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Vent Cowl of dia 75 mm
8
-
127.28
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Coupler of dia 75 mm
16
-
636.32
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Double Y with Door of dia 75 mm
4
-
595.36
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Double Y of dia 75 mm
4
-
459
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Single Y with Door of dia 75 mm
4
-
427.2
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Single Y of dia 75 mm
4
-
331.76
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Double Tee with door of dia 75 mm
8
-
1799.68
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Double Tee of dia 75 mm
8
-
1127.04
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Single Tee with Door of dia 75 mm
8
-
654.4
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Single Tee of dia 75 mm
8
-
536.24
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR 45 degree Bend of dia 75 mm
40
-
1772.4
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Door Bend of dia 75 mm
40
-
3044.8
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR Plain Bend of dia 75 mm
40
-
2272.4
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.
16
-
4090.08
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR P-Trap(big with air vent) of 110 mm dia.
8
-
2145.04
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Pipe clip of 110 mm dia.
40
-
818
Factory Sheds Maheshwaram;Supplying & of PVC/SWR Vent Cowl of 110 mm dia.Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors
8
-
172.72
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors N)Supplying & of PVC/SWR Reducer of 110 dia.
16
-
1036.16
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Double Y with door of 110 mm dia.
4
-
1040.72
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Double Y of 110 mm dia.
4
-
804.4
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Single Y with door of 110 mm dia.
4
-
772.6
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Single Y of 110 mm dia.
16
-
2454.08
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Double Tee with door of 110 mm dia
8
-
2654.08
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & of PVC/SWR Double Tee of 110 mm dia.
8
-
2335.92
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.
8
-
1172.48
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.
8
-
981.6
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying of PVC/SWR 45 degree Bend of 110 mm dia
16
-
1272.48
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia 87.5 degree
32
-
3890.24
Factory Sheds Maheshwaram;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc Excluding GST.,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia 87.5 degree
112
-
10561.6
Factory Sheds Maheshwaram;Sanitary Items Supplying and fixing of PVC/SWR. Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc, Excluding GST. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors C) Supplying and fixing of PVC/SWR 160mm dia Double Socket pipe 4 Kg/sq.cm
40
-
21677.6
Factory Sheds Maheshwaram;Sanitary Items Supplying and fixing of PVC/SWR. Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc, Excluding GST. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors Supplying and fixing of PVC/SWR 75mm dia Single Socket pipe 6kgs/.sqcm
96
-
14748.48
Factory Sheds Maheshwaram;Sanitary Items Supplying and fixing of PVC/SWR. Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc, Excluding GST. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors Supplying and fixing of PVC/SWR 110mm dia Single Socket pipe 6 kg/sq.cm
436
-
94415.8
Factory Sheds Maheshwaram;Fabrication , transportation, supply & fixing of suitable size panel board for single phase submersible motor above 2 Hp to 3 HP consisting of relay, Contactor, starting and running capacitors & cyclic operation, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes; LT / LK / BCH / Crompton/ Siemens. Excluding GST
4
-
31953.08
Factory Sheds Maheshwaram;PUMPS & EQUIPMENT Supply, erecting & testing of 3.00HP Three phase open well ISI submersible motor pumpset.(65x50) Makes: Kirloskar / Crompton / Texmo / CRI / KSB. including all labour charges, all taxes etc complete for finished item of work as directed by the ENgineer - In- Charge ( 1 working + 1 standby) Excluding GST
8
-
238982.32
Factory Sheds Maheshwaram;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover Including all labour charges, all taxes etcExcluding GST,. complete for finished item of work as directed by the Engineer-In- Charge.
16
-
11452.32
Factory Sheds Maheshwaram;Supplying and Fixing of Bronze Ball valve with SS Ball and SS Spindle as per IS - Class -I, Indian make heavy type of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.Ball valve 25mm NB size
4
-
1944.16
Factory Sheds Maheshwaram;Supplying and Fixing of Bronze Ball valve with SS Ball and SS Spindle as per IS - Class -I, Indian make heavy type of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.Ball valve 40 mm NB size
8
-
9014.64
Factory Sheds Maheshwaram;a) Supplying & fixing of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size Including all labour charges, all taxes etcExcluding GST,. complete for finished item of work as directed by the Engineer-In- Charge.
8
-
31166.88
Factory Sheds Maheshwaram;Providing,fixing, testing and commissioning of HDPE pipes confirming to IS 4984 standard including all fitting like tees,elbows, bends, unions, coupling, reducer tees, collars etc.The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for pressure rating ( PN ) 10 - 50 mm dia. - Inside the Bore Well
400
-
61600
Factory Sheds Maheshwaram;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etccomplete for finished item of work as per SS 20 B (APSS 308), except GST.
400
-
42116
Factory Sheds Maheshwaram;a) Supply, Fixing & testing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc,Excluding GST. complete for finished item of work as directed by the Engineer-In- Charge - Bore Well to UG Sump
200
-
105844
Factory Sheds Maheshwaram;a) Supply, Fixing & testing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings Including all labour charges, all taxes etc Excluding GST,. complete for finished item of work as directed by the Engineer-In- Charge. Municipal Supply to UG Sump.
200
-
70396
Factory Sheds Maheshwaram;WATER PIPE SUPPLY LINES a) Supply, Fixing & testing of 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & Including all labour charges, all taxes etc, Excluding GST,. complete for finished item of work as directed by the Engineer-In- Charge.
200
-
95164
Factory Sheds Maheshwaram;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc Except GST,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors 3" dia (76.2 mm) Double Socket
128
-
129575.68
Factory Sheds Maheshwaram;Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc Except GST,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors 4" dia (101.2 mm) Double Socket
92
-
128043.76
Factory Sheds Maheshwaram;Supply and Fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings etc. with solvent jointing as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
72
-
12843.36
Factory Sheds Maheshwaram;S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty as per approved drawing , including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
40
-
36674.8
Factory Sheds Maheshwaram;S&F Stainless steel liquid soap container wall mounted and bottle type near wash basins with necessaryfixing screws and clamps etc.,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels
48
-
22740.96
Factory Sheds Maheshwaram;S&F CP finish brass wall mounted towel ring,of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels
48
-
31085.28
Factory Sheds Maheshwaram;S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded , including all incidental and operational charges,Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work
48
-
31248.48
Factory Sheds Maheshwaram;S&F of 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 8931,as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
32
-
21181.44
Factory Sheds Maheshwaram;S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels ..:(Make :Jaquoar Equivalent)
40
-
135429.2
Factory Sheds Maheshwaram;S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 and with 10 years antyof approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels ..:(Make :Jaquoar Equivalent)
48
-
61024.8
Factory Sheds Maheshwaram;Supplying & Fixing Oval shape basin white of Size 520 mmX 410 mm of make parryware or equivalent of 1st quality conforming to IS:2556-Part-4:1972 , 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931,CP finish brass body 32 mm dia nominal size waste coupling with half/full thread & brass check nut conforming to IS 2963: 1979,15 mm nominal size CP finish brass stop valve screw type with internal /external threaded conforming to IS 8931, 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 8931 ,Pipe connector ( with LIP ring) - UPVC/SWR Pipe as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .
48
-
259151.04
Factory Sheds Maheshwaram;S&F premium make Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, and with 7 - 10 years warrantyof approved make including all opertaional and incidental , labour charges, all taxes etc excluding GST .complete for finished item of work in all respects:
4
-
62835.44
Factory Sheds Maheshwaram;SANITARY & C.P. FIXTURES Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. as per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .Coloured-Grade-I/Grade-II
40
-
547270
Factory Sheds Maheshwaram;Manufacture, Supply and delivery of Polyethylene Pipes (PE-100 Grade) for water supply conforming to IS : 4984/2016 including transportation to any where in Telangana but excluding GST and specials etc., complete.(Supply upto 90mm dia in coil & above 90mm dia straight length in 6M.) -- For Bore Well
152.4
-
21816.06
Factory Sheds Maheshwaram;PVC Bore cap suitable for 180mm dia PVC pipe used for bore wells. The rate is exclusive of all taxes.
1
-
220.41
Factory Sheds Maheshwaram;Supply and erecting ISI Mark submersible 5.00 HP, 3Phases, 8 stages 5 star rated Pumpset suitable for 156mm dia bore well with high quality wear resistence and dynamically balanced bronze impeller with stainless stell shaft sleeves, pump coupling and pivot of 3 phase 415V, 50HZ AC power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in nwater and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including cost, conveyance and labour charges etc., complete for finished item of work. Excluding GST
1
-
39725.54
Factory Sheds Maheshwaram;Manufacture, Suppy & Delivery of 180mm dia. Unplasticized PVC Pipes with working pressure of 6Kg/sqcm as casing pipe for borewells confirming to IS Specification No.4985/2000 (3rd revision) with bell ends (socket) in light grey /natural ivory grey / any other color (except white) inclusive of transporation with ISI mark. The rate is exclusive of all taxes. Complete for finished item of work.
152.4
-
110296.45
Factory Sheds Maheshwaram;Drilling of Tube/Bore wells by down the hole manner to a finished diameter of 163mm dia in all formations/stratas such as medium hard rock formation, consolidation formations etc., including drilling in over burdern soils to a diameter of not less than 200mm including insertion of 180mm diameter including the insetion of unplasticized PVC pipe with work presure not less than 6 Kg/Sqm as casing pipe conforming to IS specification No.4965/1988 with ISI Mark up to a depth as directed by the department and flusing 8 hours for Bore development conducting yield test including transportaion of drilling rigs supporitng vehicles including crew charges and all other charges as required etc., complete all done to the satisfactioin of department and as stipulated in the technical specification enclosed to this schedule but excluding the cost of PVC casing pipes, couplings and cap, the entire work should be carried out as per IS 2800 part I and II/1979. The rate is exclusive of all taxes in rural and urban areas.
152.4
-
51700.18
Factory Sheds Maheshwaram;Providing laying Reinforced cement concrete Hume Pipe of NP-4 class 1000mm dia plain ended tongue and groove model pipe including cost and conveyance of pipe, etc, Complete and labour charges for laying, jointing of RCC Hume pipe in position with Cement Mortar (1:2) including lifting, aligning, lowering and hoisting etc., as per drawing and as per MORTH specification 2900,2905 and 2906 and as directed by Engineer-in-charge for finished item of work for Pipe culvert . Excluding GST & Seignoriage charges.
36
-
469251
Factory Sheds Maheshwaram;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. Excluding GST
40
-
338845.2
Factory Sheds Maheshwaram;Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping. including all cost and conveyance of material etc complete for finish item for work. excluding GST.
606
-
442022.46
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
72
-
316496.16
Factory Sheds Maheshwaram;Underground Drainage Pipeline Filling in foundations with sand beneath Pipes/screed concrete in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work and as directed by the Engineer-in-Charge. (APSS NO. 309 & 310) Excluding GST & Seignoriage Charges.
75.6
-
97621.52
Factory Sheds Maheshwaram;Filling with useful borrowed earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
156.6
-
26620.43
Factory Sheds Maheshwaram;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
53.79
-
28687.82
Factory Sheds Maheshwaram;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
9.33
-
744457.59
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 10 mm to 20 mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof beam
2.35
-
13627.7
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 10 mm to 20 mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Top Slab 200 mm thick
53.79
-
103551.13
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 10 mm to 20 mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Wall 300 mm thick
122.74
-
479379.48
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 10 mm to 20 mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Bottom Slab 300 mm thick
53.79
-
140589.31
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
5.38
-
23649.3
Factory Sheds Maheshwaram;Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
252.93
-
28204.22
Factory Sheds Maheshwaram;Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered UPVC sections with TPV gaskets for sash & glazing bead shall be co-extruted with grey color soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm X 2.4 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm X 2.4 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm X 2.4 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of Profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Excluding GST
10
-
97527.1
Factory Sheds Maheshwaram;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
50.4
-
189603.79
Factory Sheds Maheshwaram;Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm and ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) Excluding GST
35.28
-
261590.97
Factory Sheds Maheshwaram;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. (BLD-CSTN-9-18) Excluding GST & Seignoriage charges
225.02
-
197824.08
Factory Sheds Maheshwaram;Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Excluding GST & Seignoriage charges
488.18
-
423623.08
Factory Sheds Maheshwaram;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls.
953.96
-
212160.7
Factory Sheds Maheshwaram;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats Excluding GST.
953.96
-
224066.12
Factory Sheds Maheshwaram;Plastering 12 mm thick to external surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. Internal Walls (SS 901,903 & 904) Excluding GST & Seignoriage charges.
953.96
-
449086.21
Factory Sheds Maheshwaram;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - Roof (Pump Room Ceiling) Excluding GST.
550.51
-
105318.07
Factory Sheds Maheshwaram;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.(APSS 901,903 & 904)
953.96
-
477008.62
Factory Sheds Maheshwaram;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
21.68
-
1729886.44
Factory Sheds Maheshwaram;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
550.51
-
293603.5
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Beams
30.25
-
372057.15
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. RCC Slabs 125mm thick
550.51
-
797843.13
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Lintels
2.34
-
30831.51
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Columns
11.88
-
156990.87
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. inth Beam
20.37
-
258347.62
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Column Pedastals
6.12
-
65494.77
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Footings
27
-
272701.62
Factory Sheds Maheshwaram;Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like trap stones, cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding GST and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615)
57.85
-
246873.72
Factory Sheds Maheshwaram;Plain Cement Concrete (1:3:6) nominal mix for levelling course in foundations using 40mm size machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site, ,sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit,all taxes except GST etc & seignorge charges.,for finished item of work for below footing of columns.
16.2
-
77083
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
86.17
-
378784.36
Factory Sheds Maheshwaram;Filling with useful borrowed earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
306.69
-
52134.23
Factory Sheds Maheshwaram;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
321.32
-
10526.44
Factory Sheds Maheshwaram;Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310).
80.33
-
23751.97
Factory Sheds Maheshwaram;Earth work excavation for foundations(Mechanical means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308)
401.65
-
42289.73
Factory Sheds Maheshwaram;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls. excluding GST
1625.91
-
361602.38
Factory Sheds Maheshwaram;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats excluding GST
1625.91
-
381893.74
Factory Sheds Maheshwaram;Plastering 12 mm thick to external surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. Internal Walls (SS 901,903 & 904) excluding GST
1625.91
-
765413.39
Factory Sheds Maheshwaram;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.(APSS 901,903 & 904) excluding GST
1625.91
-
813003.78
Factory Sheds Maheshwaram;50 mm thick 48 kg/m³ density Rockwool insulation with one Aluminium backing and GI wire mesh of 50X50X1.6 mm complete for roof area only with reuisite fasteners and as per specified parameters and codes and as directed by the Engineer-in-Charge. excluding GST
20400
-
12342000
Factory Sheds Maheshwaram;Rain Water Gutters
150
-
1821600
Factory Sheds Maheshwaram;Aluminium Turbo Ventilators on sky light roof sheet inner dia 600 mm and outer dia of 800 mm with 2 sets of 12 G - 14X25 SDTS-6 screws FRP lining, rubbers, gasket I strip 2 mm.
360
-
3397680
Factory Sheds Maheshwaram;Sky Lights (2mm Thick Tuflite/Sobic Make)
120
-
1132560
Factory Sheds Maheshwaram;Erection / fixing of Structure complete for finished item of work
4684.6
-
272596.87
Factory Sheds Maheshwaram;Supply & Installation of Pre-painted Galvalume Cladding sheeting on the existing Column structure with eaves gutters and down take pipes of same material as Cladding sheeting. The sheet should be colour coated galvalume AZ 150 (minimum 150 gm/sqm total on each side) and 550 Mpa PPGL profiled sheets for Cladding. Paint coating: Regular Modified Polyester Painting. Painting Thickness (Top):18 to 20 Microns ,(Bottom):5 to 7 Microns .Sheet width :1.020,Length:Maximum 12 Meters with Regular Range Colours. The effective width 1097mm & Effective Width 1025 mm including self Tapping Screws. profiled sheets for Cladding. The feed material should be manufactured out of nominal 0.45 mm base metal thickness (Rmt)/0.5 mm. confirming to ASTM A792, high strength steel with min.550 MPa yield strength metallic hot dip coated with aluminium -Zinc alloy (55 % aluminium 43.4% zinc 1.6% silicon) with COLORBOND or equivalent steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um, exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable square fluting in the five pan at nominal 180-250 mm center to center. The end rib shall be designed for anti-capillary groove & return leg. The feed material should have coil manufactures product details marked at regular interval. Including fasteners with min. fastened with min.25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete (Min Weight of profile 4.52 Kg/Sqm). The sheet should be provided with tappipng screws with EPDM bonded GI washers all as per specifications and codes to provide a leak-proof cladding as directed by Engineer in charge. The payment for finished item will be made for actual sheeting on the basis of sheat area measured in plan.excluding GST
4684.6
-
2450982.72
Factory Sheds Maheshwaram;Supply & Installation of pre-painted Galvalume roof sheeting on the PEB structure with ridge caps, flashings eaves gutters and down take pipes of same material as roof sheeting. The sheet and the ridges should be colour coated galvalume AZ 150 (minimum 150 gm/sqm total on each side) and 550 MPA PPGL profiled sheets for roofing. Regular Modified Polyester Painting. Painting Thickness (Top):18 to 20 Microns, (Bottom):5 to 7 Microns. Sheet width: 1.020, Length:Maximum 12 Meters with Regular Range Colours. The effective width 1097mm & Effective Width 1025 mm including self Tapping Screws. The feed material should be manufactured out of nominal 0.45 mm base metal thickness (Rmt)/0.5 mm, confirming to ASTM A792, high strength steel with min.550 MPa yield strength metallic hot dip coated with aluminium -Zinc alloy (55 % aluminium 43.4% zinc 1.6% silicon) with COLORBOND or equivalent steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um, exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable square fluting in the five pan at nominal 180-250 mm center to center. The end rib shall be designed for anti-capillary groove & return leg. The feed material should have coil manufactures product details marked at regular interval. Including fasteners with min. fastened with min.25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete (Min Weight of profile 4.52 Kg/Sqm). The sheet should be provided with sky light with min 2mm thick embossed clear polycarbonate sheet with guard mesh(for 5% of roof area) complete with tappipng screws with EPDM bonded GI washers all as per specifications and codes to provide a leak-proof roof and roof drainage system directed by Engineer in charge. The payment for finished item will be made on the basis of actual sheet area measured and area of canopy if provided will be measured in plan.Excluding GST
20311
-
1181897.09
Factory Sheds Maheshwaram;Supply & Installation of pre-painted Galvalume roof sheeting on the PEB structure with ridge caps, flashings eaves gutters and down take pipes of same material as roof sheeting. The sheet and the ridges should be colour coated galvalume AZ 150 (minimum 150 gm/sqm total on each side) and 550 MPA PPGL profiled sheets for roofing. Regular Modified Polyester Painting. Painting Thickness (Top):18 to 20 Microns, (Bottom):5 to 7 Microns. Sheet width: 1.020, Length:Maximum 12 Meters with Regular Range Colours. The effective width 1097mm & Effective Width 1025 mm including self Tapping Screws. The feed material should be manufactured out of nominal 0.45 mm base metal thickness (Rmt)/0.5 mm, confirming to ASTM A792, high strength steel with min.550 MPa yield strength metallic hot dip coated with aluminium -Zinc alloy (55 % aluminium 43.4% zinc 1.6% silicon) with COLORBOND or equivalent steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um, exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable square fluting in the five pan at nominal 180-250 mm center to center. The end rib shall be designed for anti-capillary groove & return leg. The feed material should have coil manufactures product details marked at regular interval. Including fasteners with min. fastened with min.25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete (Min Weight of profile 4.52 Kg/Sqm). The sheet should be provided with sky light with min 2mm thick embossed clear polycarbonate sheet with guard mesh(for 5% of roof area) complete with tappipng screws with EPDM bonded GI washers all as per specifications and codes to provide a leak-proof roof and roof drainage system directed by Engineer in charge. The payment for finished item will be made on the basis of actual sheet area measured and area of canopy if provided will be measured in plan.Excluding GST
20311
-
10626715.2
Factory Sheds Maheshwaram;Erection / fixing of Structure complete for finished item of work
589.1
-
7452115
Factory Sheds Maheshwaram;Hardware Connection Bolts
12
-
1524600
Factory Sheds Maheshwaram;Flashings upto 600 mm Girth with 0.5 mm Thick AZ 150 and 550 mpa
7.5
-
853050
Factory Sheds Maheshwaram;Cold Forming: Galvanized 275 GSM:345 mpa
97.5
-
10145850
Factory Sheds Maheshwaram;Anchor Bolts Hot Dip Glavanized ASTM A36
8
-
735680
Factory Sheds Maheshwaram;The structure has to be designed as per relevant codes for dead load including the provision for installation of solar panels and its load on the structure, live load of 0.57KN/M2 (firefighting pipe loads whichever is higher), applicable wind load for the Site, seismic loads as per IS 1893 and its combinations as per codes. The structural designs and drawings should be submitted along with design calculations and basis of design, incorporating the actual site dimensions for approval by the Engineer in charge. Based on the details as provided by the Contractor for a. support reactions, b. base plate location, orientation along with size in Auto CAD format and c. GAD of Shed; the foundation design & drawings will be provided to the Contractor. Structure, Columns, Rafters, Bracing, Purlings, Canopy etc., Plate material shall confirm to 345 mpa IS 2062 with one coat of Redoxide prime & two coats of Epoxy Paint with Sand Blasting. Fabrication should be done as per relevant IS code and approved drawings and the structural system should be fabricated and erected as per actual site dimensions of the Godowns and canopy and as directed by the Engineer in charge. The rates of structural steel should include cost and erection and painting of main structure bracings, purlins, steel substructure etc at site. The fabrication should be as per actual site alignment of the columns and their spacing. The payment will be made for the actual work executed on weight basis. The rate is inclusive of design & drawing charges, transportation, fabrication, painting ,erection both with tripod and mechanical crane, incidentals, hire and operational charges of tools and plants, getting temporary power supply, etc., complete for finished item of work.Excluding GST
464.1
-
47732685
Factory Sheds Maheshwaram;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Excluding GST Design, Supply, fabrication and erection / fixing in position of Pre-Engineered Building (PEB) structure along with PEB roofing system complete as per following specifications.
280.8
-
2071467.22
Factory Sheds Maheshwaram;Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work.( APSS No.1212) Excluding GST
280.8
-
34204.25
Factory Sheds Maheshwaram;Painting Priming Coat on one coat of new Iron Work including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work. Excluding GST
280.8
-
20276.57
Factory Sheds Maheshwaram;Providing and fixing welded MS grills with MS 12 mm square bars for window / ventilator openings including welding and rounding the noces and grinding smooth the joints and fixing with necessary screws, bolts including two coats of first quality synthetic enamel paint over a coat of zinc cromate primer, etc., complete for finished item of work, including cost of all incidentals and T & P as directed by Engineer-in-Charge. Excluding GST
6123.85
-
638595.08
Factory Sheds Maheshwaram;Supply & installation with following specifications: Material: Galvanized Iron; Shutter Thickness: 46 mm; Shutter Sheet Thickness: 0.8 mm; Frame Sheet Thickness: 1.2 mm; Infill Material: Honey Comp; Fire rated double leaf shutter; Power coating 50 - 80 Microns; Hinges: SS Ball Bearin Hinges of size 100X75X3 mm complete SS screws of GEZE/Godrej make Stainless Steel finish; Double Point Panic Bar GAZE / YALE/Hafele Make; External Trim Operation with locking arrangement; Glass vision panel with clear wired or in wired glass of thickness 6 mm for upto 2 hours fire rating. Heavy duty door closure of GEZE /Yale make; concealed flush bolt with rod. Complete for finished item of work including transporation to the site. Excluding GST
90.72
-
836352.22
Factory Sheds Maheshwaram;Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidnetal, operational and labour charges complete for finished item of work. Excluding GST
432
-
52621.92
Factory Sheds Maheshwaram;All gears, worms, etc used in the assembly of the rolling shutters shall be machine-cut. Worm gear wheels shall be of high grade cast iron or mild steel or phosphor bronze. The worms shall be of mild steel or gun-metal or phosphor bronze. All safety devices like anchoring rods, central hasp and staple should be fixed to bottom lock plate. The rate should include supplying and fixing of all accessories like locking, arrangements, pulling hooks, handles, sliding locks, stoppers. All the components of rolling shutter shall be given coat of brushing quality ready mixed primer. The rate is all inclusive of cost of material like hood cover and springs, bearings, locks, ball bearings, all accessories etc., transportation labor charges for manufacturing transportation and fixing in place to line and grade, cost and operational charges of T&P, overheads all incidentals etc complete for finished item of work as spl spn 1108. Excluding GST
216
-
784080
Factory Sheds Maheshwaram;Providing and laying Vaccum Dewatered flooring of 150mm thick with M20 Design Mix cement concrete minimum 350 kgs of cement and 20 mm HBG graded aggregate, with top 12 mm thick wearing coat above 88 mm thick M20 laid in line & grade as per drawings and directions including shuttering, machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Industrial Shed. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 100 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge. The construction joint to be formed by cutting with mechanical saw in both direction at 5 m. interval the size of groove shall be 4 mm x 10 mm portion with polysulphide joint sealant be provided as directed by engineer-in-charge. Excluding GST & Seignoriage charges.
18473.61
-
37336828.43
Factory Sheds Maheshwaram;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 50 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes for finished item of work. (APSS No. 501 & 504).Excluding GST & Seignoriage charges.
373.96
-
2359911.98
Factory Sheds Maheshwaram;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
261.53
-
20867952.07
Factory Sheds Maheshwaram;Plastered band with 15mm thick moulded cement mortar band in CM(1:4) (1 Cement:4 Sand) upto 100mm in width raised band including cost and conveyance of all materials like cement, sand , water etc. and all operational, incidental charges on materials & including cost of all labour charges for mixing mortar, finishing, scafollding, lift charges, curing including cutting as directed by the Engineer-in-Charge etc., complete for finished item of work of all heights (SS 901,903,904).Excluding GST & Seignoriage Charges. Chajja (Sun Shade)
30.46
-
3958.89
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and including sales & other taxes on all materials , centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903).Excluding GST & Seignoriage charges Chajja (Sun Shade)
176.8
-
157949.58
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,ine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).Excluding GST & Seignoriage charges. Lintels
11.42
-
150468.32
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Plinth Beam
142.84
-
1811604.01
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Column Pedastals
435.38
-
4659332.27
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Footings
1395.6
-
14095643.74
Factory Sheds Maheshwaram;Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like trap stones, cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding GST and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615) (BLD-CSTN-6-12)
417.93
-
1783507.92
Factory Sheds Maheshwaram;Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including cost & conveyance of all material, hire and operational charges of T&P, labour charges for all operations, premixing the material with water at OMC in mechanical mix plant, carriage of material by tipper to site, laying in uniform layers with paver finisher in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including lighting, grading, barricading and maintenance of diversion of trafic, etc., complete for finished item of work, as per table 400.13 of technical specification clause 406 MORTH(5th Revision). excluding GST & Seignoriage Charges
3731.67
-
7878749.5
Factory Sheds Maheshwaram;Plain Cement Concrete (1:3:6) nominal mix for levelling course in foundations using 40mm size machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site, ,sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit,all taxes except GST etc & seignorge charges.,for finished item of work for below footing of columns.
127.5
-
606671.78
Factory Sheds Maheshwaram;Providing Antitermite treatment as per BIS - IS 6313 (Part 2) 2013 code specification (Pre-constructional chemical tretament measures) & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry lmidacloprid 30.5% SC ((IS63131) dissolve 2.1 Ml/1 litre of water and apply emulsion / solution @ 7.5 litres /sqm of internal and external verticle surface of the columns, plinth beams (back filling) walls and floor junction, external perimeters along retaining wall @ 5 litres / sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (plinth) and @ 2.0 litres / line metre at expansion joints. The substructure of a depth of 500 mm around columns & 300 mm deep around plinth beams, basement & floor filling area including excavation channel along the wall & rodding, etc., cost and conveyance of all materials to the Site, cost of labour for spraying, rodding, etc., complete for finished item of work as per the approval of the Engineer-in-Charge (plinth area measurements will be taken for measurements) inclusive of contractors profit complete, for finished item of work. (APSS No. 402) Excluding GST.
1269.61
-
219248.95
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
2819.58
-
12394253.37
Factory Sheds Maheshwaram;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
5329.41
-
174591.47
Factory Sheds Maheshwaram;Filling with carted gravel (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
12104.53
-
3579067.43
Factory Sheds Maheshwaram;Earth Work Excavation in Ordinary Rock (not requiring Blasting) by Manual means upto 3 m depth including breaking rock and depositing on bank for all lifts and with an initial lead including all operational,labour charges such as shoring,sheeting,planking, strutting etc.,for finished item of work excluding dewatering charges etc., as per technical specification clause 301MORTH (5th Revision) excluding GST
333.09
-
109809.78
Factory Sheds Maheshwaram;Industrial Sheds Earth work excavation for foundations(Mechanical means) for buildings in ordinary soils by Mechanical means and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) - ordinary soils by Mechanical Means upto 3m depth
6328.67
-
666345.66
Factory Sheds Maheshwaram;Plain cement concrete 1:2:4 prop (concrete: fine aggregate:coarse aggregate) using 20mm size (SS 5) metal with hand mixing including cost and conveyanance of all materials like sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }conforming to table 1000-2), cement, coarse aggregate water etc, to site cost of labour charges for mixing, laying concrete for foundation tamping, vibrating, lifting, curing, finishing top surface for benching curbbing lintel and table drain but excluding, centering, shuttering charges and cost of steel and fabrication charges etc. complete for finished item of work (As per SS 402)excluding GST and seigniorage charges
2.68
-
14967.51
Factory Sheds Maheshwaram;Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like trap stones, cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding GST and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615)
21.48
-
91665.47
Factory Sheds Maheshwaram;Plain Cement concrete 1:5:10 proportion (Cement: Fine Aggregate: Course Agreegate) for foundation and under flooring bed using 40 mm size (SS 5) hard granite machine crushed matal including cost and conveyence of all materials like cement, sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }conforming to table 1000-2), course aggregate, water, etc., to site, laour charges, for hand mixing, for laying concrete in foundation, ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work as per (SS No. 402) excluding GST & seigniorage charges
3.6
-
15095.95
Factory Sheds Maheshwaram;Painting walls with snowcem or other equal and approved water proof cement paint over priming coat, two coats (all colours) including cost and conveyence of all materials to work site and all operational incidental charges, labour charges, etc., complete for finished item of work.Excluding GST
54
-
8420.76
Factory Sheds Maheshwaram;Plastering 12 mm thick two coats with base coat of 8 mm thcik CM (1:6) and top coat of 4 mm thick in CM (1:4) with dubara sponge finishing including cost and conveyence of all materials like cement, sand, water, etc, to site cost of all materials, all operational including charges, labour for mixing of mortar, finishing, scoffolding, lift charges, curing, including cutting grooves where ever necessary, etc., complete for finished item of work of uneven surfaces of walls. (As per SS 904) Excluding GST & Seignoriage charges.
54
-
24715.26
Factory Sheds Maheshwaram;Brick masonry second class ground moulded or traditional size 19X9X9 cm in CM 1:6 having a crushing strenth of not less than 40 kg/cm², including cost and conveyence of all materials light cement, sand, bricks, water to work site all including and operational charges, labour chares, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work (S.S. No. 504) Excluding GST & Seignoriage charges.
4.56
-
32956.08
Factory Sheds Maheshwaram;Supply and laying of sand for filling and blindageincluding cost and conveyence of material and filling in existing trench as per direction the direction of Engineer-in-Charge..Excluding GST
129.6
-
124878.67
Factory Sheds Maheshwaram;Supply and delivery of 20 mm HBG metal (IS 383-1970) including cost and conveyence of material and filling in existing trench as per direction the direction of Engineer-in-Charge..Excluding GST
129.6
-
201018.67
Factory Sheds Maheshwaram;Supply and delivery of 40 mm HBG metal (IS 383-1970) including cost and conveyence of material and filling in existing trench as per direction the direction of Engineer-in-Charge..Excluding GST
324
-
354721.68
Factory Sheds Maheshwaram;Rainwater Harvesting Pits Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material or as directed by the Engineer - in - Charge with all lifts and leads upto 1 km including all operations, incidental,and labour charges, all other taxes etc., complete for finished item of work etc., complete as per MoRTH Specification Clause 304. Excluding GST
663.21
-
73954.55
Factory Sheds Maheshwaram;Plastering 12 mm thick two coats with base coat of 8 mm thcik CM (1:6) and top coat of 4 mm thick in CM (1:4) with dubara sponge finishing including cost and conveyence of all materials like cement, sand, water, etc, to site cost of all materials, all operational including charges, labour for mixing of mortar, finishing, scoffolding, lift charges, curing, including cutting grooves where ever necessary, etc., complete for finished item of work of uneven surfaces of walls. (As per SS 904) Excluding GST & Seignoriage charges.
367.22
-
168072.92
Factory Sheds Maheshwaram;Brick masonry second class ground moulded or traditional size 19X9X9 cm in CM 1:6 having a crushing strenth of not less than 40 kg/cm², including cost and conveyence of all materials light cement, sand, bricks, water to work site all including and operational charges, labour chares, scaffolding, mixing mortar, constructing amsonry, lift charges, all lift, delifts, all leads, curing charges, etc., complete for finished item of work (S.S. No. 504) Excluding GST & Seignoriage charges.
367.22
-
2653976.06
Factory Sheds Maheshwaram;Vibrated Reinforced cement concrete M20 Grade Concrete using 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }conforming to table 1000-2) including cost, (excluding seigniorage) and conveyance of all materials to site and all labour charges , centering, machine mixing, laying in position, Compacting, Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1500,1700, 2200 (5th Revision) for cover slab over drain.Excluding GST & Seignoriage charges.
176.1
-
1175803.85
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
58.7
-
258032.29
Factory Sheds Maheshwaram;Excavation for Roadwork in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross?sections, and transporting to the embankment location within all lifts and lead upto 1000 m as per technical specification MORTH clause 301 (5th Revision). .Excluding GST
369.8
-
41236.4
Factory Sheds Maheshwaram;Stormwater Drains Cleaning and grubbing jungle including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps, of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. MORTH Clause No. 201 (5th Revision). .Excluding GST
598.73
-
1999.76
Factory Sheds Maheshwaram;Supply of Precast concrete blocks for paving of M-40 Grade and thickness not less than 80 mm for medium traffic areas confirming to IS:15658:2006 in all shapes and designs as per manufacturer's specifications.Excluding GST
2164.71
-
1740296.96
Factory Sheds Maheshwaram;Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including cost & conveyance of all material, hire and operational charges of T&P, labour charges for all operations, premixing the material with water at OMC in mechanical mix plant, carriage of material by tipper to site, laying in uniform layers with paver finisher in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including lighting, grading, barricading and maintenance of diversion of trafic, etc., complete for finished item of work, as per table 400.13 of technical specification clause 406 MORTH(5th Revision). excluding GST & Seignoriage Charges
546.59
-
1154026.4
Factory Sheds Maheshwaram;Contraction sawn joint groove (using diamond studded blades) 3 to 5mm wide and 1/4 to 1/3depth of the slab + or - 5 mm or as stipulated in the drawings and dowels bars complying with clause 602.6.5 of specifications for road and bridge works (third revision) published at New Delhi in 1995 by IRC on behalf of Government of India, Ministry of surface transport and as directed in the drawings the contraction joints shall be cut as soon as the concrete has undergone initial hardening and as hard enough to take the load of joint sawing machine without causing damage to the slab. The joint ceiling compound shall be of hot poured bitumen type having fexibility, resistance to age hardening and durability of the sealant shall be in accordance with BS 5212 (part-2) with all lead & lift including cost and conveyance of all materials etc., complete for 50 mm depth.Excluding GST
1273.52
-
202324.12
Factory Sheds Maheshwaram;Providing gravel berms to the required thickness including spreading in layers of 150 mm thick with side slope of 2:1(2H:1V),sectioning each layer to proper camber, watering, consolidation of each layer with vibratory roller of 8 to10 tonnes capacity to achieve desired density at OMC including cost conveyance of gravel, water etc., to site, labour charges for all operations, hire and operational charges of vibratory roller and other T&P diversion of traffic, etc., complete for finished item of work, as per MORT&H (5th Revision) Spc.No.401. Excluding GST & Seignoriage charges.
643.13
-
247823.71
Factory Sheds Maheshwaram;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved including plasticizer @0.5% by weight of cement, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all material, labour charges for all operations, hire and operational charges of all T&P, diversion of traffic etc. complete for finished item of work as per drawing and Technical Specification Clause 1501 MORD.Excluding GST and Seigniorage Charges
1800.75
-
13246911.25
Factory Sheds Maheshwaram;Supply and placing seperation membrane of impermiable vergin plastic sheeting 125 Microns thick uniformly over already laid PCC in single layer with out rinkles including cost and conveyance of all material and all labour charges for spreading under Pavement slab or as directed by the Engineer- in - charge etc., complete.Excluding GST
8914.61
-
166703.21
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
1337.19
-
5877993.06
Factory Sheds Maheshwaram;Providing Granular Sub Base using HBG crushed close graded material confirming to grading -I of MoRTH table - 400.1 (50% of 53mm to 9.5mm , 20% of 9.5 to 2.36mm and 30% of 2.36mmm below)including spreading the HBG material in layers of uniform thickness not exceeding 150mm thick with motor grader on prepared surface, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density complete as per technical specification as directed by the Engineer-in-charge etc, including cost and conveyance of HBG material, water etc to site, , labour charges for all operations, all incidentals hire & operational charges of roller and other T&P etc, complete for finished item of work as per MoRT&H (5th Revision) Specification 401. Excluding GST & Seignoriage Charges.
2257.33
-
4334773.37
Factory Sheds Maheshwaram;Compaction of original ground with maximum of six passess of vibratory power road roller including filling in depression occuring during rolling as per MOST specification No.305 (3.4) complete and as directed by the Engineer - in - Charge.Excluding GST
15048.87
-
232806.02
Factory Sheds Maheshwaram;Dismantling of Cement Concrete Payment by Mechanical Means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately. MORTH Clause 202. Complete finished item of work.excluding GST
41.86
-
192513.3
Factory Sheds Maheshwaram;Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transporting to site spreading, grading to required slope and compacting to meet requirement of Table 300-2 including all labour charges, hire& operational charges complete for finished item of work, MORTH Clause 305 (5th Revision). Payment will be based on levels for finished item of work. Excluding GST
6685.96
-
2673113.67
Factory Sheds Maheshwaram;Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 maintaining the required camber in the formation including all labour charges, hire& operational charges complete for finished item of work, MORTH Clause 305 (5th Revision). Payment will be based on levels for finished item of work. Excluding GST
11379.42
-
1406837.69
Factory Sheds Maheshwaram;Excavation for Roadwork in soil with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross?sections, and transporting to the embankment location within all lifts and lead upto 1000 m as per technical specification MORTH clause 301 (5th Revision). .Excluding GST
17396.78
-
1939914.94
Factory Sheds Maheshwaram;INTERNAL ROADS Cleaning and grubbing jungle including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps, of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. MORTH Clause No. 201 (5th Revision)..Excluding GST
15197.87
-
50760.89
Factory Sheds Maheshwaram;Providing and laying Vaccum Dewatered flooring of 150mm thick with M20 Design Mix cement concrete minimum 350 kgs of cement and 20 mm HBG graded aggregate, with top 12 mm thick wearing coat above 88 mm thick M20 laid in line & grade as per drawings and directions including shuttering, machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Industrial Shed. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 100 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge. The construction joint to be formed by cutting with mechanical saw in both direction at 5 m. interval the size of groove shall be 4 mm x 10 mm portion with polysulphide joint sealant be provided as directed by engineer-in-charge. Excluding GST & Seignoriage charges.
92.16
-
186263.65
Factory Sheds Maheshwaram;Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work. APSS No.1212 Excluding GST
17.22
-
2097.57
Factory Sheds Maheshwaram;Painting Priming Coat on new Iron Works including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work. Excluding GST
17.22
-
1243.46
Factory Sheds Maheshwaram;Supplying & Fixing of 50MM Nominal bore M. S. pipe with two coat of synthetic enamel paint and one coat of red oxide including cost & conveyance of all materials, labours, providing & applying red-oxide to MS pipe etc. complete for finished item of work. For Railing & Ladder. complete for finished item of work. excluding GST
232.46
-
27393.09
Factory Sheds Maheshwaram;Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm and ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) Excluding GST
1
-
7414.71
Factory Sheds Maheshwaram;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
12.25
-
6533.29
Factory Sheds Maheshwaram;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc.,.Excluding GST complete for finished item of work as per SS 912 for internal walls.
64.67
-
14382.61
Factory Sheds Maheshwaram;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
64.67
-
15189.69
Factory Sheds Maheshwaram;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - Roof (Pump Room Ceiling) Excluding GST.
12.25
-
2343.55
Factory Sheds Maheshwaram;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.(APSS 901,903 & 904).Excluding GST
52.42
-
26211.57
Factory Sheds Maheshwaram;Plastering 12 mm thick to external surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. Internal Walls (SS 901,903 & 904) .Excluding GST
52.42
-
24677.24
Factory Sheds Maheshwaram;Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504). Excluding GST & Seignoriage charges
16.34
-
117032.31
Factory Sheds Maheshwaram;Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like trap stones, cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, water, etc., to site including cost and conveyance of all material and all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding GST and seigniorage charges complete for finished item of work for foundation and basement (APSS No. 601 & 615)
7.32
-
31237.95
Factory Sheds Maheshwaram;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
2.96
-
236183.76
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Staircase (150 mm thick)
5.4
-
9881.24
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. RCC Slab SF (150 mm thick)
14.44
-
29436.95
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. RCC Slab FF (150 mm thick)
14.44
-
26423.18
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. RCC Slab GF (150 mm thick)
14.44
-
23409.41
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Pump Room Waist Slab Beam
1.89
-
22851.42
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Water Tank Top Slab Beam - SF
0.42
-
5372.97
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges.Water Tank Base Beam F.F
0.42
-
5165.75
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Pump Room Roof Slab Beam GF
0.42
-
5078.09
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. 2nd Floor side Walls of Water Tank (300MM Thick)
22.4
-
97523.33
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Columns First Floor
2.92
-
40686.05
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Columns Ground Floor
2.92
-
38586.98
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Plinth Beam
1.05
-
13316.89
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Column Pedastals
1.58
-
16908.78
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Footings
4.86
-
49086.29
Factory Sheds Maheshwaram;Filling with useful borrowed earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
28.66
-
4871.91
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
27.18
-
119477.3
Factory Sheds Maheshwaram;Pump Room & Overhead Tank Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete ,for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
38.71
-
4075.78
Factory Sheds Maheshwaram;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in Telangana F.O.R. destination including, loading, unloading & stacking at site but excluding all taxes, as applicable. I.S.I Mark
2
-
5998.88
Factory Sheds Maheshwaram;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
256.19
-
136633.81
Factory Sheds Maheshwaram;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
5.22
-
416513.25
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 10 to 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST & Seignoriage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Sump Side walls 300mm thick
92.96
-
363069.22
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Sump Top Slab 150 mm thick
57.24
-
92794.63
Factory Sheds Maheshwaram;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) .Excluding GST & Seignoriage charges. Sump Bottom Slab 300 mm thick
57.24
-
152825.65
Factory Sheds Maheshwaram;Filling with useful excavated earth in trenches, sides of foundations and basement with all leads in layers not exceeding 15cm thick, consolidating Each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work as per standard specification. (APSS NO. 309 & 310) .Excluding GST
137.13
-
4492.38
Factory Sheds Maheshwaram;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402).Excluding GST & Seignoriage charges
8.59
-
37759.75
Factory Sheds Maheshwaram;Sump Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting,dewatering etc. complete for finished item of work including seigniorage etc. as per SS - 20 B (APSS 308).Excluding GST Ordinary Soil-Mechanical Means-Up to 3 m depth
306.94
-
32317.71
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements