Telangana State Industrial Infrastructure Corporation Limited Tender

street lights;Crane Hire chargees for removal and shifting of existing electrical poles of any type from the subject location including locading and unloading charges including machinary hire charges for cranes etc to the relocation to the specified location, including the labour charges etc., complete for finished item of work as directed by the Engineer in Charge

street lights;Labour charges for cutting of CC road and restoring to get original position including all labour charges etc complete.

street lights;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.Istrip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

street lights;Supply & Laying of 25x3mm GI strip for Transformer earthing /feeder pillar box earthing and including labour charges for making earth trench and laying etc., complete.

street lights;Labour charges for cutting of BT road to suitable width and upto required depth and making RCC concrete (1:2:4) upto road level to get original position including all labour charges etc complete.

street lights;Supply and Fixing of 65mm dia medium grade GI pipe for entry of cable at road crossing/ centre wedge of road at a depth of 500mm where ever necessary including labour charges and taxes etc., complete.

street lights;Supply and laying of 8SWG GI wire including cost and labour charges etc., complete(along with UG cable)

street lights;Supply and fixing of 3'X2'X1.5' size powder coated double door welded to frame type Feeder Pillar Box with 3Nos hinges on each side with two types of locking arrangement and made of 16SWG CRCA sheet,with 4Nos 30X3mm size copper bus bars fixed on epoxy insulators and with 3 Nos 70A ML4 L&T make contactor and 3Nos L&T make dial type timer switches, 1 No 125A 4 pole MCCB and 12 Nos 32A SPMCBs (B-series) as out goers and including S&F of indicator lamps auto and normal switch control and fixed on angle iron frame of size 45X45X5mm and 1.5M long and including labour charges for grouting the frame 1.5ft below and 2ft above ground and connctions and inter-connections with 10 sqmm copper wire. The cost including all incidental labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. Make: L&T/ MDS/ SIEMENS

street lights;Supply and erection of double crimping Aluminium cable lugs suitable for following U.G armoured Aluminium cables with including labour charges etc., complete and work is to be carried out as per the specifications and requirement of site conditions (Dowells/Jaison).(c)3.5 core, 50sqmm

street lights;Supply and erection of double crimping Aluminium cable lugs suitable for following U.G armoured Aluminium cables with including labour charges etc., complete and work is to be carried out as per the specifications and requirement of site conditions (Dowells/Jaison).(b)3.5 core, 25sqmm

street lights;Supply and erection of double crimping Aluminium cable lugs suitable for following U.G armoured Aluminium cables with including labour charges etc., complete and work is to be carried out as per the specifications and requirement of site conditions (Dowells/Jaison).(a) 4 core, 16sqmm

street lights;Supply and erection of heavy duty flange type tinned brass cable gland suitable for following U.G armoured Aluminium cables and including labour charges etc., complete and work is to be carried out as per the specifications and as requirement of site conditions (Dowells/Jaison).(c)3.5 core, 50sqmm

street lights;Supply and erection of heavy duty flange type tinned brass cable gland suitable for following U.G armoured Aluminium cables and including labour charges etc., complete and work is to be carried out as per the specifications and as requirement of site conditions (Dowells/Jaison).(b)3.5 core,25sqmm

street lights;Supply and erection of heavy duty flange type tinned brass cable gland suitable for following U.G armoured Aluminium cables and including labour charges etc., complete and work is to be carried out as per the specifications and as requirement of site conditions (Dowells/Jaison).(a) 4 core, 16sqmm

street lights;Supply, laying and testing of the following size XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes :Torrent /Universal / Polycab / Havells / Gloster / KEI (c) 3.5 Core 50 sqmm UG cable

street lights;Supply, laying and testing of the following size XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes :Torrent /Universal / Polycab / Havells / Gloster / KEI ( b ) 3.5 Core 25 sqmm UG Cable

street lights;Supply, laying and testing of the following size XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes :Torrent /Universal / Polycab / Havells / Gloster / KEI (a) 4 Core 16sqmm UG Cable

street lights;Supply and laying of the following size double walled corrugated HDPE duct made as per specification BSEN - 500 86 in existing cable trench with necessary HDPE fittings for protection of 1.1 KV grade U.G cable including cost and conveyance of all materials, labour charges etc., complete and inclusive of all duties and taxes and work is to be carried out as per the specifications and requirement of site conditions (Makes: Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus / CPE .(b) Outer dia 63mm and Inner dia 51mm

street lights;Supply and laying of the following size double walled corrugated HDPE duct made as per specification BSEN - 500 86 in existing cable trench with necessary HDPE fittings for protection of 1.1 KV grade U.G cable including cost and conveyance of all materials, labour charges etc., complete and inclusive of all duties and taxes and work is to be carried out as per the specifications and requirement of site conditions (Makes: Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus / CPE .(a) Outer dia 50mm and Inner dia 38mm

street lights;Earth excavation of Cable trench in hard ground soil, laying of above or any required UG cable on sand cushion covering the cable with bricks and back filling of Trench and to provide cable route indicators at 8M spacing etc., complete including cost and conveyance of all materials, labour charges etc., complete and inclusive of all duties and taxes and work is to be carried out as per the all specifications and requirement of site conditions.

street lights;Supply and transportation of 250 W +/-10% (>=25000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA /SYSKA./ Capart / Fortune Arrt / FIEM / Arraystorm / GM / Goldmedal / Panasonic / Silicon / Leksa / Orient / HPL / Valmont / Transrail LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM / SAMSUNG / LG LEDs.

street lights;Supply and transportation of 150W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Suitable lens on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro /Eveready / Halonix / HAVELLS/ SURYA / SYSKA / Capart / Fortune Arrt / / HPL LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

street lights;Fabrication, Transportation and supply and installation of 1.5 Mtr sword type or any decorative Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe Makes: BAJAJ / TRANSRAIL/ UTKARSH or equivalent make as approved by Engineer in Charge

street lights;Fabrication, Transportation and supply and installation of 1.5 Mtr sword type or any decorative double arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe Makes: BAJAJ / TRANSRAIL / UTKARSH or equivalent make as approved by Engineer in Charge.

street lights;Fabrication, Transportation and supply and installation of hot-dip galvanized Octogonal Pole with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards withbakelite sheet, din channel for MCB's with 6-32A SP MCB- 1No (Legrand/ Schneider or equivalent make) as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155mm, Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x750mm long 'J' bolts along with template or equivalent. Makes: BAJAJ / TRANSRAIL / UTKARSH or equivalent make as approved by Engineer in Charge, complete finished item of work, including cost and conveyance of all materials, labour charges etc., complete and inclusive of all duties and taxes and work is to be carried out as per the all specifications and requirement of site conditions.

street lights;Foundation and erection charges with special T&P, for 9.00Mtrs long Octagonal pole duly erecting on base plate dulyproviding 4 Nos foundation bolts with nuts with providing of 0.60Mtrx0.60Mtrsx1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement as directed by the field engineers during execution including centering, decentering water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete