Telangana State Industrial Infrastructure Corporation Limited Tender

Earth work excavation for pole pit size 0.65mx0.65mx1.40m suitable for construction for pole foundation as per the approved drawing in the existing road portion area and with backfilling of pole pit including cost and conveyance of all materials, labour charges etc., complete and inclusive of all duties and excluding GST and work is to be carried out as per the all specifications and requirement of site conditions & department officials only.

Ribbed Tor 40 TMT steel (FE 415) ( Cold Twisted High Strength Deformed Bars) wrought and put up including decoiling, bending, cranking and typing them after placing in position as per the approval structural designs and drawings and as directed by the Engineer-in-charge including cost, conveyance of steel, binding wire and all labour charges for fabrication etc, complete for finished item of work as per MORTH specification 1600 (steel ( 19.3kg/pole)).The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Providing and laying Vibrated Reinforced Cement Concrete corresponding to M-20 grade using 20mm size graded machine crushed hard granite chips ( Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, coarse aggregate, sand etc to site seigniorage charges of materials including steel centering, shuttering, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, all other incidental and operational charges, labour charges and all taxes etc , complete but excluding cost of steel and its fabrication charges for the following finished items of work as per standard specifications.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Supply and transportation of 120W LED Street light Body made of high grade pressure die –cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection 10KV,THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with warranty 50,000 burning hours. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80certificates.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture /CROMPTON / BAJAJ / Wipro / HAVELLS / SURYA/EVEREADY/HALONIX.

Supply, laying and testing of 16 Sqmm 4 core 1100 V grade, XLPE under ground armoured aluminium cable in existing trench/pipe from pole junction box, giving connections etc., complete including cost and conveyance of all materials, including labour charges etc., complete. The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge (Make:KEI/ Havells/ Poly cab/Finolex)

Supply, laying and testing of 25 Sqmm 3.5core 1100V grade, XLPE under ground armoured aluminium cable in existing cable trench / pipe from Feeder pillar box to pole junction box in existing cable trench as circuit cable and giving connections etc., comple.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge. (Make KEI /Havells/Poly cab/Finolex)

Supply, laying and testing of 50 Sqmm 3.5 core 1100V grade, XLPE under ground armoured aluminium cable in existing cable trench /pipe from Transformer to Feeder pillar Box and giving connections and labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge (Make KEI/Havells/Poly cab/Finolex)

Supply and erection of heavy duty flange type tinned brass cable glands suitable for following U.G armoured Aluminum cables with including labour charges etc complete. The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge (Dowells/ Jaison).

a) 4 core 16sqmm

b) 3.5 core 25 sqmm

c)3.5 core 50 sqmm

Supply and erection of double crimping cable lugs suitable for following U.G armoured Aluminum cables with including labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge (Dowells/Jaison).

a) 4 core 16sqmm

b) 3.5 core 25 sqmm

c)3.5 core 50 sqmm

Supply and laying of 65 mm dia medium class GI pipe for drawing cable at road crossing and cental verge of road at a depth of 500 mm wherever necessary including labour charges and taxes etc., complete. (for drawing UG cable) (any ISI Make)The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Supply and fixing of 3'X2'X1.5' size powder coated double door welded to frame type Feeder Pillar Box with 3Nos hinges on each side with two types of locking arrangement (lock and key, Panel Key) and made of 16SWG CRCA sheet, with 4Nos 30X3mm size copper bus bars fixed on epoxy insulators and with 3 Nos 70A ML4 L&T make contactor and 3Nos L&T make dial type timer switches, 1No 125A 4 pole MCCB and 12Nos 32A SPMCBs (B-series) as out goers and including S&F of indicator lamps auto and normal switch control and fixed on angle iron frame of size 45X45X5mm and 1.5M long and including labour charges for grouting the frame 1.5ft below and 2ft above ground and connections and inter-connections with 10 sqmm copper wire, and providing with 2 Nos earth pits to box etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge Make: L&T/MDS/ SIEMENS

Supply and fixing of M.S box for 3 Phase energy meter of size 24"X18"X15" made of 16 SWG with powder coated, with partition and double shutter and with 125A 4P Double Break Switch in SS enclosure on wooden flank including fixing on pole/plinth and giving connection etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Supply and laying of 8 SWG GI wire including cost and conveyance, labour charges for laying and giving connections etc.complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.

Earth excavation of Trench of size 1M X 0.3 MX 0.9M in all types of soil drawn through the double wall corrugated pipe and back filling of Trench with the excavated soil and providing cable route indicators at 8M spacing including all labour charges etc., Complete. The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:DURALINE (Dura Guard)/BAJAJ/Gamson/Ultra Plus

Supply and Transportation of Outer dia 63mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes:DURALINE (Dura Guard)/BAJAJ/Gamson/Ultra Plus.

Supply and Transportation of Outer dia 90mm and Inner dia 76mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II including laying the pipe in the exisitng trench with all labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge Makes:DURALINE (Dura Guard)/BAJAJ/Gamson/Ultra Plus

Providing independent earthing by excavating a pit to a depth of 2.0M in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2mtrs length with necessary accessories with 18" hume pipe ring duly providing staggered holes including filling with salt and charcoal and labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Providing independent earthing by excavating a pit to a depth of 2.0M in all soils, as per size specified in the data, using 100mm dia CI pipe of 2mtrs length with necessary accessories including filling with salt and charcoal and labour charges etc., complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Relocation of exisitng single arm pole with the help of crane and erection of removed poles wherever necessary as per the directions of the Engineer-in-charge. The rates are inclusive of hire charges of crane, transportation and erection of poles etc complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

Erection charges for 9m height pole on existing pole foundation with the help of crane, including labour charges for finished item of work as per the directions of Engineer-in-Charges etc complete.The cost including all incidental and operationalcharges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work.The work is to be carried out as per the all specifications and requirement of site conditions under the guidance of Engineer-In-Charge

No. of Items : 24( Twenty Four only)

(Rupees Two Crore Ninety Four Lakhs Thirty Nine Five Hundred Thirty Five Only)

Note : 1)The Rates given in schedule 'A' under Part-I are excluding GST.The Tender Percentage(Excess or Less ) shall not apply to the above items under Part-II

1) The rates mentioned in schedule 'A' are including all taxes except GST. 2) The above rates are for finished items of work including cost and convenyance of all requisite materials to site, Seigniorage Charges, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc.