Telangana State Industrial Infrastructure Corporation Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Telangana State Industrial Infrastructure Corporation Limited - TSIIC Tender
Textile, Apparel and Footwear
Opening Date26 Oct 2024
Closing Date11 Nov 2024
Tender Amount₹ 5,26,50,166
Costs
EMD
₹ 5,27,000Document Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
553733Tender No
06/CE-II/TGIIC/2024-25, Dt:17.10.2024Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Development KMTP;Light, Fan Fittings Supply, installation, testing and commissioning of Pendent holder with 9w LED Lamp including all accessories and labour charges complete.
6
158
948
Development KMTP;Supply and fixing of 8way VTPN Distribution board on wall suitable for MCB's in sheet steel enclosure fixed on suitable angle iron frame with 160A 4P MCCB 1Nos as incomer and 8Nos 40-63A TP MCB's as outgoers including all connections cable entry box. testing and earthing complete PDB.Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V / Hager-h3 / C&S -Winbreak / BCH
1
52342
52342
Development KMTP;Supply and fixing of 4way TPN Distribution board on wall suitable for MCB's in sheet steel enclosure fixed on suitable angle iron frame with 40A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers including all connections cable entry box. testing and earthing complete PDB.Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V / Hager-h3 / C&S -Winbreak / BCH
6
11100
66600
Development KMTP;Supply and fixing of 8way SPN Distribution board on wall suitable for MCB's in sheet steel enclosure fixed on suitable angle iron frame with 40A DP MCB 1 Nos as incomer and 8Nos 6-32A SP MCB's as outgoers including all connections cable entry box. testing and earthing complete Room DB .Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V / Hager-h3 / C&S -Winbreak / BCH
1
3883
3883
Development KMTP;Supply and laying of Cat 6 LAN cable in the existing PVC/MS conduit as directed by the department including cost and conveyance of all materials and labour charges for drawing and giving connections with testing etc complete. (Makes:D Link / AMP / Molex/Legrand)
600
35
21000
Development KMTP;Supply and erection of approved make RJ45 LAN socket as d i rected by the department including cost and conveyance of a l l materials and labour charges etc complete
30
461
13830
Development KMTP;Supply and erection of approved make RJ11 Telephone socket as d i rected by the department including cost and conveyance of a l l materials and labour charges etc complete
10
262
2620
Development KMTP;Supply and erection of approved make T V socket as directed by the department including cost and conveyance of all materials and labour charges etc complete
4
50
200
Development KMTP;Supply and laying of 50 pair telephone wire including labour charges for laying in existing PVC conduit pipr and giving connection etc complete
100
262
26200
Development KMTP;Supply and laying of 2 pair telephone wire including labour charges for laying in existing PVC conduit pipr and giving connection etc complete
100
25
2500
Development KMTP;Supply and laying of RG6 T.V. wire including labour charges for laying in existing PVC conduit pipe and giving connection etc complete
200
33
6600
Development KMTP;Supply and run of 4 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1of 56/0.3mm (4 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour charges etc. complete.
250
516
129000
Development KMTP;Supply and run of 4 of (4.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 2 of (2.5 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour charges etc. complete.
200
408
81600
Development KMTP;Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1 of 56/0.3mm (4 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour charges etc. complete.
900
316
284400
Development KMTP;Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1 of 36/0.3mm (2.5 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour
725
228
165300
Development KMTP;Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire (Phase, Neutral) with run of 1 of (1.5 sq. mm.) Copper cable (Earth) conductor in the existing conduit pipe for power points including labour
1800
151
271800
Development KMTP;Supply and fixing of 125A 4P MCCB with MS Enclosure for indoor AC unit including earth connection and all labour charges etc., complete on wall.
1
16753
16753
Development KMTP;Supply and fixing of 25A Metal clad including earth connection and all labour charges etc., complete on wall.
30
1496
44880
Development KMTP;Supply and fixing of 1no 16A 3pin/ 6A 3pinmodular socket and 1 n o. 16 Am ps modular switch control (5 in one) with modular box and front plate including earth connection and all labour charges etc., complete on wall.
28
767
21476
Development KMTP;3x6A Sockets : 3no. 6A modular switch control and 3no. 3/2 pin modular sockets fixing on separate board including all labour charges etc., complete.
30
1908
57240
Development KMTP;Supply and fixing of 1no. 6A modular switch control and 1no. 3/2 pin modular sockets fixing on separate board including all labour charges etc., complete.
40
636
25440
Development KMTP;Supply and fixing of 1 no. 6A 3 pin modular socket with 1 no. 6A modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
5
284
1420
Development KMTP;Wiring with 3 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)
30
1409
42270
Development KMTP;Wiring with 3 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Two way Light Point) (cost 1.5 times of light point)
3
1772
5316
Development KMTP;Wiring with 3 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (Secondary Light Point)
42
234
9828
Development KMTP;Point wiring Wiring with 3 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)
30
1181
35430
Development KMTP;Supply and Fixing of 32mm dia 2mm thick surface P.V.C. pipe (ISI Mark) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains
155
133
20615
Development KMTP;Internal Electrification Supply and Fixing of 25mm dia 1.5mm thick surface / Consealed P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.
1640
123
201720
Development KMTP;Supply and Installation of 600mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
1
1397
1397
Development KMTP;Ladder type Cable tray Supply and Installation of 300mm x 75mm x 2mm thick GI Ladder type cable tray along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.
1
875
875
Development KMTP;Supply, transportation and Installation of 600mm x 75mm x 2mm thick hot dip GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete ISI Make profab or its equivalent.
1
2227
2227
Development KMTP;GI perforated cable tray Supply, transportation and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.ISI Make profab or its equivalent
36
1227
44172
Development KMTP;8 SWG GI wire
100
27
2700
Development KMTP;25x6mm GI strip
50
176
8800
Development KMTP;Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25x3mm GI strip
50
103
5150
Development KMTP;25 x 6mm Copper strip
50
1760
88000
Development KMTP;Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required. 25 x 3mm Copper strip
10
896
8960
Development KMTP;Providing independent earthing for Sophisticated Electronic equipment by excavating a pit of size 0.9X0.9X2.1M in all types of soils with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe connected with reducer of 0.3mm,providing G.I funnel with wiremesh as per National Electric Code and 18" dia hume pipe ring duly providing staggered holes in GI pipe including filling with salt and charcoal in layers and giving earth connections from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
1
18940
18940
Development KMTP;Providing independent earthing by excavating a pit of size 0.6X0.6X2.1M in all types of soils with 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with proportionate of Salt and Charcoal in layers giving earth connection from electrode G.I strip of 25mm x6mm x 200mm length with all accessories and hume pipe ring and all labour charges etc., complete
4
6635
26540
Development KMTP;Labour & Transport charges for erection of poles, strut poles,concreting, cutpoint /vertical formation, earthing etc. for one Kms- 9.0Mtrs PSCC Poles-, 8.0Mtrs Stud poles-14 Nos,Cut points,MS stay sets- Per KM Job Work
2.2
103227
227099.4
Development KMTP;Materials for concreting of pole /stay/ strut locations
2.2
29367
64607.4
Development KMTP;Materials for danger boards, bolts & nuts, etc
2.2
968
2129.6
Development KMTP;C.I Knob
55
11
605
Development KMTP;LT Metal parts /Hard ware fittings
100
46
4600
Development KMTP;LT Shockle insulator
100
34
3400
Development KMTP;LT GI Pin
200
36
7200
Development KMTP;LT Pin Insulator
200
34
6800
Development KMTP;34 sq.mm AAA Conductor
6
21255
127530
Development KMTP;55 sq.mm AAA Conductor
7
45532
318724
Development KMTP;8.0 M poles used as studs
15
1562
23430
Development KMTP;Stay wire 7/2.5mm
80
76
6080
Development KMTP;11KV stay clamp MS Flat 50x6mm
8
87
696
Development KMTP;11KV MS stay set without base plate(without stay wire and without concreting)
8
658
5264
Development KMTP;Back Clamp
50
64
3200
Development KMTP;LT Top fitting with Clamp cost
50
245
12250
Development KMTP;LT 3-ph 4 Wire line x-arms cost
50
369
18450
Development KMTP;Supply 9.1 M PSCC pole
50
2949
147450
Development KMTP;Supply and fixing of Automatic Street Light Control System with Optical Sensor,Low volatage / High voltage trip andreset, operating voltage 380 - 450 V AC,50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider / L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 8 KW Three phase load with necessary clamping arrangements. Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj.
6
12498
74988
Development KMTP;Supply and Fixing of 250X200X120 sizes thermo plastic pole boxes IP 65 protection.Make : Hensel / Sintex / Sadhrish / EPP or equivalen
90
1321
118890
Development KMTP;Supply and Laying of 10 Sqmm 4 Core XLPE insulated,1100V grade armoured alluminium cable with ISI mark as per specificationconfirming to IS:7098 (Part - I)Makes : Torrent / Unicab / Universal /Polycab / Havells / Gloster / KEI /Finolex / Payal / RR kable / Beljin /Ollvin / Finecab / RPG / V - Guard / Orbit/ Fortune Arrt / Gemscab / Bonton / SPM/ Unistar / Windsor/ Avocab / Pawancab/ Nakoda / Suncab
150
299
44850
Development KMTP;Supply and Laying of 1.5 Sqmm 3 core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells /Polycab / RPG / KEI / Gloster / V-Guard /Finecab / SPM / Gemini / Unistar /Windsor / Payal / Fortune Arrt / Avocab /Pawancab / Nakoda / HPL / Sudhakar.
100
105
10500
Development KMTP;Supply and Laying of 6 Sqmm WPTC (WeatherProof Twin Core) ISI mark AlluminiumWire.Makes : Polycab / GM / Million / V-Guard/ Gold Medal / Kundancab / HPL / RPG /Nandicab / Nakoda / Payal / Finecab /Gemini / Vimal / Suncab / Stanjo /Rajnigandha / Orbit / Airson / Beljin /Savera Champion. / Rhino / Pawancab
800
58
46400
Development KMTP;Supply and fixing of 40mm dia medium grade GI Bracket 1.5Mtrs length for fixing of LED lamp including bending charges and clamps and nuts and bolts etc complete.
90
1541
138690
Development KMTP;supply and erection of 8.0 Mts PSCC poles including labour charges for excavation of pit, transprotation and erectin charges etc complete ( as per the TSSPDCL ).
45
5420
243900
Development KMTP;Supply, transportation and fixing of 120 W LED Street light Body made of high grade pressure die ?cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt,with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV,THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates including labour charges for fixing the LED streetlight fittings on existing pole and giving connections etc., complete for finished item of work. LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Surya /HAVELLS / POLYCAB / SURYA / Capart LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs
90
9973
897570
Development KMTP;Internal Electrification Supply and stringing of LT Single / Three phase 3 / 4 Wire 2X16+1x25 Aerial Bunched stranded alluminium conductor XLPE/HDPEinsulated conductor twisted over bare allalluminium alloy messenger wire of 1100V confirming to IS: 14255/1995.Make : Pawancab / Havells / KEI
4000
199
796000
Development KMTP;Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
109.56
196
21565.12
Development KMTP;Brick masonry with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).
12.14
8418
102231.87
Development KMTP;Providing fine sand filling in Harvesting pit including Operational charges , incidental charges , Labour charges etc., for complete for finished item of work.
45
2593
116700.3
Development KMTP;Providing 20 mm HBG metal in Harvesting pit including Operational charges , incidental charges , Labour charges etc., for complete for finished item of work.
75
1851
138858.75
Development KMTP;Providing 40 mm HBG metal in Harvesting pit including Operational charges , incidental charges , Labour charges etc., for complete for finished item of work.
150
1511
226765.5
Development KMTP;Rain Water Harvesting Pits Earth work excavation in ordinary soil and depositing the earth on road side or as directed by the Engineer-in-charge for all lift and an initial lead of 10m including all operational charges, incidental charges, labour charges and in all conditions such as dry ,wet,slushy etc including shoring and strutting etc complete for finished tem of work.
300
285
85606.63
Development KMTP;Supplying and fixing of SFRC manhole covers with frames of 24x24 HD 20 as the given locations of site, Manufacture as per BIS:12592 (Part 1&2) with ISI marking anywhere in T.G., F.O.R. destination including, loading, unloading & fixing the same complete all, finished item of work.
1
2849
2849.5
Development KMTP;Re filling foundation/ basement /pipe line trenches with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, and all other taxes except GST, all labour charges, hire charges of T&P etc., complete for finished item of work, as directed by Engineer-in-charge (APSS No. 309 & 310)
60
40
2430
Development KMTP;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
200
560
112050
Development KMTP;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars (Fe 415 grade as per IS 1786-1979) upto 36mm dia for RCC and RCM works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, seigniorage charges, all other taxes except GST, all labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work, as directed by Engineer-in-Charge (APSS No.126).
2.35
67000
157450
Development KMTP;Supply and placing of the M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,ine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).Excluding GST & Seignoriage charges. 200mm thick Roof Slab
23
3204
73705.8
Development KMTP;Supply and placing of the M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,ine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).Excluding GST & Seignoriage charges. 230mm thick side walls
57
3787
215907.45
Development KMTP;Supply and placing of the M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. Sump Bottom Slab
7
13124
91870.1
Development KMTP;Plain Cement Concrete (1:4:8) prop.using 40mm nominal size well graded hard broken granite metal from approved quarry including cost and conveyance of all material, seigniorage charges, all other taxes except GST, and all labour charges for machine mixing of concrete, laying concrete, compacting by vibration including curing, finishing top surface to required levels neatly etc., complete as derected by Engineer-in-charge for finished item of work in foundations. BLD-CSTN-3-5
8
5328
42628.4
Development KMTP;For GLSR 50000 liters Earth work excavation for foundations (Mechanical Means) for building in ordinary soils and depositing on bank of all lifts and with an intial lead of 10m and up to 3m depth including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B (APSS 308)
120
128
15390
Development KMTP;For OHSR/ELSR 60000 Ltrs Construction of ELSR for OHSRs/ELSRs with a staging of 12 m for Zone-II Seismic and excluding Seigniorage charges. 1) For intermediate ranges proportional rates may be adopted. All VRCC minimum of M30 grade design mix.2)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with Raft Foundation and a rate of Rs.5600/- per tonne for Cement and Rs.77000/- per tonne for Steel.3) For every metre of staging less than 12 m, the rate shall be reduced by Rs.0.05 paise per litre per every metre of difference in staging. 4) For every metre of staging above 12 m , the rate shall be increase by Rs.0.10 paise per litre per every metre of additional in staging. 5)The above rates shall be increased / decreased due to increase / decrease in the cost of Cement by Basic Rate x (Rc-5600)/5600 x 0.069 Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate 6)The above rates shall be increased / decreased due to increase / decrease in the cost of Steel by Basic Rate x (Rs-77000)/77000 x 0.135 Rs = Rate of Steel (Rs per MT) (Fe-500/500D/550D from Primary Producers)at the time of preparation of estimate. The above formula applicable only for preparation of estimate. The price adjustment shall be adopted on the actual consumption of Steel and Cement. including verticals, lightening arrester, nameboard, plastering, painting and etc., including all labour charges, three coats of food grade epoxy paint to inner surface of the reservoir inuding roof dome, including 2 coats of weather proof emulsion painting for external surfaces over one coat of primer of approved make, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, wind pressures upto 250 kg/ sq m. For decrease in wind pressure the rate has to be decreased by 2.5% per every 50 kg/sqm. If the ELSR/ OHSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs. For Tribal/ Agency area, the above rates shall be increased by 5%. If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earth quake the above rates are to be increased by 15%. Fixtures include: a) RCC or Aluminium ladder inside 0.60 m wide. staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20m. S.S railing to stair case upto 1.2m height.
60000
34
2098242
Development KMTP;Re filling foundation/ basement /pipe line trenches with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, and all other taxes except GST, all labour charges, hire charges of T&P etc., complete for finished item of work, as directed by Engineer-in-charge (APSS No. 309 & 310)
6168.1
40
249808.05
Development KMTP;150-160mm Sluice valve
1
12344
12344.6
Development KMTP;Construction of Brick Masonry chamber for sluice valves of dia 80 to 150mm as per type design SANTD4/1941 including earth work excavation in all types of soils, providing concrete broken stone in CM(1:4) for foundations, brick masonry in CM(1:6) for chamber with plastering in CM(1:3) 12mm thick having RCC(1:2:4) for cover slab with 500mm dia manhole frame and cover including cost and conveyance of all materials, seigniorage charges, all other taxes except GST, all labour charges curing etc., complete for finished item of work, as directed by Engineer-in-Charge. 80-100mm Sluice valve
12
10387
124645.2
Development KMTP;Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation for finished item of work excluding GST
1487.4
152
227125.98
Development KMTP;200 mm dia for Outlet
15
2431
36468.75
Development KMTP;100 mm dia for Inlet
20
1630
32616
Development KMTP;100 mm dia for Over flow
20
1630
32616
Development KMTP;Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes.including transportation etc, complete as directed by Engineer-in-Charge for finished item of work as directed by Engineer - in - Charge, excluding GST. 100 mm dia for Scour
15
1630
24462
Development KMTP;150mm dia Sluice Valve
1
33815
33815.5
Development KMTP;Manufacture, Supply and Delivery of Cast Carbon Steel rising / Non rising spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998. (The valve shall be used for High pressure schemes & pumping stations), including lowering and laying the valves in position and including all other taxes except GST, including transportation of all materials to site etc., complete as directed by engineer-in-charge for finished item of work. (ISI Marked.) 80 mm dia Sluice Valve
8
16890
135124
Development KMTP;Supply and fixing of 25mm MDPE water pipe line connections from 75mm HDPE pipe line to Individual Plots including earth work excavation, 75mm Clamp Saddle with brass threading, 25mm MDPE pipe, Brass FTA, Ferrule, teflon tape, end cap and refilling of excavated soil etc. including labour charges for fixing and transportation charges of materrials etc., complete for finished item of work
182
2701
491673
Development KMTP;180mm dia
460
1117
514004
Development KMTP;140mm dia
400
713
285240
Development KMTP;125mm dia
100
587
58725
Development KMTP;Manufacture, Supplying and laying in position HDPE pipes as per IS 4984, PE100, PN6 including transportation, laying, fixing, butt welding of joints, testing of pipes at 6 kg/sqcm, rectifying all leakages, including necessary bends, reducers, enlargers, provision of flanges as and wherever required especially near to the valves etc., all complete finished item of work. 63mm dia
4666
182
851078.4
Development KMTP;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).
6077
128
779375.25
Development KMTP;S/F of 32mm outer dia Polyethylene pipe (PE-100 Grade) of 12.5 Kg/ sqcm
92
64
5961.6
Development KMTP;S/F of 180mm dia PVC pipe (slotted)
10
1116
11168.5
Development KMTP;S/F of 180mm dia PVC casing pipe of 6 Kg/ sqm
28
798
22365
Development KMTP;Drilling of 6 1/2" dia Bore well for providing water supply facilities to Amenities building including 180mm dia PVC pipe 6 Kg/ sqm, 180mm dia PVC pipe (slotted) 6 Kg/ sqm and 32mm outer dia Polyethylene pipe (PE-100 Grade) of 12.5 Kg/ sqcm all taxes except GST etc., complete for finished item of work Drilling of 6 1/2" dia Bore well
122
657
80257.7
Development KMTP;Supplying, fixing of 34.90 mm OD CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes Except GST etc,. complete for finished item of work as directed by the Engineer-In- Charge.
90
386
34767
Development KMTP;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Three layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks complete for finished item of work
2000
11
22800
Development KMTP;Supplying and fixing of PVC/SWR 75mm dia Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes Except GSt etc,. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors
51
206
10508.55
Development KMTP;Supplying and fixing of PVC/SWR 160mm dia Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes Except GSt etc,. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors
61
2656
162022.1
Development KMTP;Supplying, fixing of 28.60 mm OD CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes Except GST etc,. complete for finished item of work as directed by the Engineer-In- Charge.
30
284
8521.5
Development KMTP;Supplying, fixing of CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Supplying, fixing of 22.20 mm OD CPVC pipes Including cost and conveyance of all materials, all labour charges, all taxes Except GST etc,. complete for finished item of work as directed by the Engineer-In- Charge.
37
237
8787.5
Development KMTP;Supplying of PVC/SWR 45 degree Bend of dia 75 mm
10
53
534
Development KMTP;Supplying of PVC/SWR Plain Bend of dia 75 mm
10
69
693.5
Development KMTP;Supplying & of PVC/SWR Single Y with door of 110 mm dia.
8
230
1845.2
Development KMTP;Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.
6
146
879.6
Development KMTP;Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia 87.5 degree
14
113
1591.1
Development KMTP;Supplying and fixing of PVC/SWR. Single/ Double Socket pipes of 6 kg/sq.cm ISI marked of approved make and fixing as per site requirements and including fixing of M.S. clamps if necessary with required no. of Bombay nails etc., Including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. Concealed in Floors PVC/SWR 110mm dia Single Socket pipe
73.8
256
18918.63
Development KMTP;Supply, fixing & testing of 6 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Finolex / Million / Polycab / Havells / V-Guard / Gold Medal / GM
20
42
848
Development KMTP;Supply, fixing & testing of 10 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: / Million / Polycab / Havells / V-Guard / Gold Medal / GM including cost and coveyance of all material and labour charges for finished item of work excluding GST
20
51
1022
Development KMTP;Supply and Transportation of star rated 3hp Three phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi including all labour charges, all taxes etc complete for finished item of work as directed by the ENgineer - In- Charge.Except GST
1
45446
45446
Development KMTP;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering cement mortar 1:3prop ; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'- 0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.Except GST
16
9870
157934.4
Development KMTP;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
1
851
851
Development KMTP;Supplying and Fixing of Bronze Ball valve with SS Ball and SS Spindle as per IS - Class -I, Indian make heavy type of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.Ball valve 40 mm NB size
1
1288
1288.95
Development KMTP;S & F Gunmetal Gate (GM) Bronze Gate/ Globe valves as per IS-778 Class - I Indianmakeheavytype- Indian make heavy type of approved make, as per approved drawing , including all incidental and operational charges, Transportation , labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
3
4623
13869
Development KMTP;Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etccomplete for finished item of work as per SS 20 B (APSS 308), except GST.
15
123
1856.25
Development KMTP;Supply and Fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings etc. with solvent jointing as per approved drawing including all incidental and operational charges, Transportation ,labour charges and all taxes excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels.
17
214
3638.85
Development KMTP;S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty of approved make as per approved drawing , including all incidental and operational charges, transportation ,labour charges and all taxes Excluding GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels ..:(Make :Jaquoar Equivalent)
7
4008
28059.5
Development KMTP;Supplying & Fixing Oval shape basin white of Size 520 mmX 410 mm of make parryware or equivalent of 1st quality conforming to IS:2556-Part-4:1972 , 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931,CP finish brass body 32 mm dia nominal size waste coupling with half/full thread & brass check nut conforming to IS 2963: 1979,15 mm nominal size CP finish brass stop valve screw type with internal /external threaded conforming to IS 8931, 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS 8931 ,Pipe connector ( with LIP ring) - UPVC/SWR Pipe as per approved drawing by Engineer in charge, including all incidental and operational charges, Transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .
10
6481
64815.5
Development KMTP;Water supply and Sanitary System Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. as per approved drawing by Engineer in charge, including all incidental and operational charges, transportation ,labour charges and all taxes except GST etc., complete as directed by Engineer In Charge for finished item of work for all floors and all levels .Coloured-Grade-I/Grade-II
7
17329
121307.9
Development KMTP;Providing impervious coat to exposed RCC roof slab surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903). Excluding GST & Seignoriage charges.
4.6
273
1257.41
Development KMTP;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like AF Star TMT/MS Life TMT, Radha TMT, Sugna TMT etc of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
1.2
77290
92748.06
Development KMTP;Roof Beam
0.5
15842
7921.35
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Top Slab 200 mm thick
5
2464
12321.5
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Side Walls 300 mm thick
16
5216
83467.2
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Bottom Slab 300 mm thick
5
3204
16020.5
Development KMTP;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } , coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit except seignorge charges & GST complete, for finished item of work. (APSS No. 402)
0.5
5110
2555.22
Development KMTP;Earth work excavation for foundations(Mechanical means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
32.1
128
4116.82
Development KMTP;Supply and fixing of stainless steel (304 grade) hand railing as per approved drawing including fixing verticals base plates using bonding agent and anchor fastner and welding including fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to presement seamless finish including cost and conveyance of all materials, welding charges cost of all consumables, labour charges etc., and Overheads & Contractors profit complete for finished item of work.
250
863
215937.5
Development KMTP;First Floor
115.55
1213
140162.15
Development KMTP;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707) Except GST & Seignoriage charges. Ground Floor
63.95
1159
74175.61
Development KMTP;First Floor
0.5
6661
3330.82
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) (RCC Stairecase - Steps) Ground Floor
0.5
6382
3191.43
Development KMTP;First Floor
11.7
2324
27201.91
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Waist Slab 0f 175 mm thick Ground Floor
11.7
2279
26667.81
Development KMTP;Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered UPVC sections with TPV gaskets for sash & glazing bead shall be co-extruted with grey color soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm X 2.4 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm X 2.4 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm X 2.4 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of Profile shall consist a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Except GST
1.5
1385
2077.95
Development KMTP;Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish, over heads and contractors profit ,all taxes except GST etc., complete for finished item of work For Door Frames
26
1385
36017.8
Development KMTP;Supply and fixing of doors as per approved drawings with 1st class teak wood frame of section 150mm x 125 mm and best teak wood door shutter of 35mm thick double shutters including cost and conveyance to site of teak wood frame, shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long, 2 No. aldrop 300mm x 16 mm dia, 2 Nos. tower bolt of 150 mm x 12 mm dia at top, 4 Nos. 175mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1830mm x 2600mm) Excluding GST 1.83 m X 2.60 m size
1
91542
91542.4
Development KMTP;Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 100mm x 75 mm and 30mm thick PVC single shutters including cost and conveyance to site of teak wood frame, PVC shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (750mm x 2100mm) Excluding GST 0.75 m X 2.10 m size
9
14401
129609.45
Development KMTP;Supply and fixing of doors as per approved drawings with 1st class teak wood frame of section 125mm x 100 mm and ISI marked flush door shutter of 40mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1520mm x 2100mm) Excluding GST 1.52 m X 2.10 m size
4
34858
139432.8
Development KMTP;Supply and fixing of doors as per approved drawings with 1st class teak wood frame of section 125mm x 100 mm and ISI marked flush door shutter of 40mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long, 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos. 150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1520mm x 2100mm) Excluding GST 1.05 m X 2.1 m size
5
20095
100478.5
Development KMTP;First Floor
41.61
950
39548.22
Development KMTP;Providing dadooing to walls with glazed coloured tiles 1st quality of size with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth,including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. Excluding GST & Seignoriage charges Ground Floor
41.65
937
39042.71
Development KMTP;First Floor
9.25
1042
9640.81
Development KMTP;Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.( In Toilets) Excluding GST & Seignoriage charges Ground Floor
9.25
989
9149.64
Development KMTP;First Floor
107
1213
129791
Development KMTP;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,complete for finished item of work. (APSS No.701 & 707) Except GST & Seignoriage charges. Ground Floor
91
1159
105550.9
Development KMTP;Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls. Except GST & Seignoriage charges. For all Floors
1084
273
296311.4
Development KMTP;Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats. Except GST For All Floors
1084
312
338479
Development KMTP;First Floor
261
249
65119.5
Development KMTP;Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) - Excluding GST & Seignoriage charges. Ground Floor
241
236
57044.7
Development KMTP;First Floor
503
516
259673.75
Development KMTP;Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty nife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for internal walls). Excluding GST Ground Floor
581
485
282249.8
Development KMTP;First Floor
157
293
46016.7
Development KMTP;Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work (for External walls). Excluding GST Ground Floor
163
277
45289.55
Development KMTP;First Floor
308
614
189142.8
Development KMTP;Plastering 12 mm thick to external surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. Internal Walls (SS 901,903 & 904) Except GST & Seignoriage charges. Ground Floor
658
565
372197.7
Development KMTP;First Floor
295
642
189404.75
Development KMTP;Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.(APSS 901,903 & 904) Except GST & Seignoriage charges. Ground Floor
533
593
316415.45
Development KMTP;First Floor
92.1
1519
139918.32
Development KMTP;Brick Masonry for partition walls 0f 11 cm thick for superstructure in CM (1:3) prop. (Cement : Screened sand) using second class traditional size bricks as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm including cost and conveyance of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing, etc., complete for finished item of work. Except GST & Seignoriage charges Ground Floor
82.1
1200
98565.15
Development KMTP;First Floor
34.05
8148
277466.64
Development KMTP;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 50 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes for finished item of work. (APSS No. 501 & 504).Excluding GST & Seignoriage charges. Ground Floor
43.9
7815
343087.28
Development KMTP;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
33.3
7746
257951.79
Development KMTP;Painting Priming Coat on new Iron Works and two coats of synthetic enamel paint of first grade including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work.( APSS No.1212) Excluding GST
62.85
233
14703.76
Development KMTP;Providing and fixing welded MS grills with MS 12 mm square bars for window / ventilator openings including welding and rounding the noces and grinding smooth the joints and fixing with necessary screws, bolts etc complete for finished item of work, including cost and conveyance of all incidentals charges and T & P as directed by Engineer-in-Charge. Excluding GST
2907
137
399421.8
Development KMTP;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like AF Star TMT/MS Life TMT, Radha TMT, Sugna TMT etc of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
18.2
77290
1406678.91
Development KMTP;First Floor
147.35
2098
309258.18
Development KMTP;RCC SLABS: Roof Slabs 150mm thick: Ground Floor
147.35
2066
304454.57
Development KMTP;First Floor
6.35
7398
46979.84
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) beams Ground Floor
6.95
7398
51418.88
Development KMTP;First Floor
16
904
14472
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,ine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).Excluding GST & Seignoriage charges.Sunshade Ground Floor
11.7
882
10325.83
Development KMTP;First Floor
1.15
17210
19791.61
Development KMTP;LINTELS Ground Floor
1.05
16201
17011.58
Development KMTP;First Floor
6.3
16324
102844.66
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement,ine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).Excluding GST & Seignoriage charges. COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS (Vibrated Cement Concrete) Columns Ground Floor
6.3
15430
97209.31
Development KMTP;Plinth Beam
10.45
15799
165105.82
Development KMTP;Column Pedastals
3.9
12320
48050.92
Development KMTP;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Excluding GST & Seignoriage charges. FOUNDATIONS, PLINTH, PEDESTALS ( Below Plinth)- Vibrated Cement Concrete Footings
56.3
11547
650096.1
Development KMTP;R.R. masonry in CM(1:6) prop. using hard variety of granite stone from approved quarry including cost and conveyance of all materials to site, all labour charges for dressing stones to required size and shape bond stone mixing of cement mortar, stone wall construction, curing, including all other taxes excluding GST & seigniorage charges etc. complete for finished item of work. Ground Level & Above Ground Level
9.8
11547
113160.6
Development KMTP;Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal and 20mm graded machine crushed hard granite metal (coarse aggregate) in (2:1) ratio from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand){ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } , coarse aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit,all taxes except GST etc.,for finished item of work for footings and basement . For Footing & Basement
28.05
6258
175536.9
Development KMTP;Providing Antitermite treatment as per BIS - IS 6313 (Part 2) 2013 code specification (Pre-constructional chemical tretament measures) & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry lmidacloprid 30.5% SC ((IS63131) dissolve 2.1 Ml/1 litre of water and apply emulsion / solution @ 7.5 litres /sqm of internal and external verticle surface of the columns, plinth beams (back filling) walls and floor junction, external perimeters along retaining wall @ 5 litres / sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (plinth) and @ 2.0 litres / line metre at expansion joints. The substructure of a depth of 500 mm around columns & 300 mm deep around plinth beams, basement & floor filling area including excavation channel along the wall & rodding, etc., cost and conveyance of all materials to the Site, cost of labour for spraying, rodding, etc., complete for finished item of work as per the approval of the Engineer-in-Charge (plinth area measurements will be taken for measurements) inclusive of contractors profit complete, for finished item of work. (APSS No. 402) Excluding GST.
144.4
164
23789.9
Development KMTP;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand{ 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } , coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit except seignorge charges & GST complete, for finished item of work. (APSS No. 402) For foundations
2.95
5110
15075.83
Development KMTP;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
138.9
40
5625.45
Development KMTP;Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310).
416.5
586
244298.07
Development KMTP;Earth Work Excavation in Ordinary Rock (not requiring Blasting) by Manual means upto 3 m depth including breaking rock and depositing on bank for all lifts and with an initial lead including all operational,labour charges such as shoring, sheeting,planking, strutting etc.,for finished item of work excluding dewatering charges etc., Excluding GST
8.3
407
3383.49
Development KMTP;Earth work excavation for foundations(Mechanical means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) Ordinary Soil - Mechanical Means up to 3m depth
157.1
128
20148.08
Development KMTP;Providing & fixing of prestressed. Precast compound wall as per the approved drawing with precast prestressed column of size 150mm x150mmx3000mm using M35 Design mix concrete with 7 no's of 4mm thick high tensional carbonised steel wire & precast prestressed slab of size 2130mmx300mmwidex50mm thick with M35 Design mix concrete using 4no's 3mm high tensional carbonised steel wire including cost of earth work excavation for column foundation upto a depth of 1.2mt pit size 450mm dia bore hole filling with M25 grade of concrete incluidng erection of columns, slabs, cost and conveyance of all materials to site, segniorage charges, labour Charges for all operation, curing wherever needed, all incidental charges, hire and operational charges of all T&P, except GST Complete for finished item of work.
640
3740
2393600
Development KMTP;Conveyance of excavated soils with machinary per Km for transportation materials by tipper and truck and dumping on the road sides where ever required as directed by the Engineer - In - Charge including loading, unloading, all incidental and operationsal charges etc., complete.
2150
43
93955
Development KMTP;Refilling with excavated soils for trenches, sides of foundations and basement with layers not exceeding 15cm thick consolidaitong and ramming etc., all operational, incidental, labour charges, complete for finished item of work.(APSS No.309 & 310) except GST
350
40
14175
Development KMTP;Providing & Laying Plain Cement Concrete M-15 Grade (1:2.5:5) prop.using 20mm nominal size well graded hard broken granite metal from approved quarry including cost, conveyance and seigniorage charges of all meterials and all labour charges for machine mixing of concrete, laying concrete, compacting by vibration including curing, finishing top surface to required levels neatly complete for finished item of work in foundations as per MORTH specification 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.(for CULVERT BodyWall/ Haunch ) 12.8 A
1120
5773
6466376
Development KMTP;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like AF Star TMT/MS Life TMT, Radha TMT, Sugna TMT etc of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work as per MORTH Specification No.1600 & 2200.Except GST.
19.02
67632
1286376.81
Development KMTP;Plain Cement Concrete (1:4:8) mix using 40mm size hard broken granite metal, coarse aggreagte and fine aggregate (50% River sand 50% Rock sand) including cost and conveyance of all materials to site, machine mixing charges, labour charges, placing in position, levelling, vibrating, curing etc., complete for finished item of work as directed by the Engineer-in-charge, Excluding GST & Seigniorage charges.as per technical specification clause No. 2100 of Morth,
255
4432
1130160
Development KMTP;Earth Work Excavation by mechanical means for road work with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location as directed by the Engineer-in-Charge including setting out, removal of stumps and all other deleterious matter, all incidental charges, hire & operational charges of all T&P, etc., complete in all soils up to SDR as per Technical Specification Clause 301 MORTH, excluding GST
2150
128
275845
Development KMTP;Providing and laying of 450mm dia NP3 class RCC pipes including cost and conveyance of all materials, labour charges for lowering, laying pipes and jointing including jointing material, all taxes, hire and operational charges of T&P etc., complete for finished item of work as directed by the Engineer - in - charge. (cable ducting)
250
2216
554012.5
Development KMTP;Providing gravel berms to the required thickness including spreading in layers with side slope of 1:2(2H:1V),sectioning each layer to proper camber, watering, consolidation of each layer with vibratory roller of 8 to10 tonnes capacity to achieve desired density at OMC including cost conveyance of gravel, water etc., to site, seigniorage charges, labour charges for all operations, hire and operational charges of vibratory roller and other T&P diversion of traffic, all taxes etc., complete for finished item of work as per MORT&H Spc.No.401.
2874.1
815
2343253.73
Development KMTP;Providing and laying bituminous concrete of 30mm thick with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH 5th specification clause No. 509 complete in all respectsexcluding GST,.and seigniorage charges
165.2
10017
1654948.82
Development KMTP;Providing and applying Tack coat with Bitumen Emulsion rapid setting over the prepared surface before laying BC @2kg/10Sqm including cleaning the road surface with mechanical broom and air compressor and applying uniformity with the aid of emulsion pressure sprayer including cost and conveyance of bitumen emulsion, labour charges, cleaning, all taxes hire charges and operational charges of all T & P necessary to complete the finished item of work as directed by the Engineer-in-Charge as per MORT&H(5th Revision) specification503. excluding GST
6257.5
11
69458.25
Development KMTP;Providing and laying dense graded bituminous macadam of 50mm thick with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH 5th specification clause No. 505 complete in all respects. (except GST & Seiniorage charges)
277
8985
2488983.5
Development KMTP;Providing and applying Primer coat with bitumen emulsion(Bulk-Slow Setting-1) over the prepared surface of granular base as Wet Mix Macadam surface at the rate of 6kg /10sqm including cleaning the road surface with mechanical broom and air compressor and spraying uniformly with the aid of bitumen pressure sprayer including cost and conveyance of bitumen emulsion and water,labour charges, cleaning, all taxes hire charges and operational charges of all T&P necessary to complete the finished item of work as directed by the Engineer-in-Charge as per MORT&H(5th Revision) specification 502.excluding GST ,
5500
34
191125
Development KMTP;Providing and applying Tack coat with Bitumen Emulsion rapid setting-1 over the prepared surface before laying DBM @2.5kg/10Sqm including cleaning the road surface with mechanical broom and air compressor and applying uniformity with the aid of emulsion pressure sprayer including cost and conveyance of bitumen emulsion, labour charges, cleaning, all taxes hire charges and operational charges of all T & P necessary to complete the finished item of work as directed by the Engineer-in-Charge as per MORT&H(5th Revision) specification503. excluding GST
5500
13
73150
Development KMTP;Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including cost & conveyance of all material, hire and operational charges of T&P, labour charges for all operations, premixing the material with water at OMC in mechanical mix plant, carriage of material by tipper to site, laying in uniform layers with paver finisher in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including lighting, grading, barricading and maintenance of diversion of trafic, etc., complete for finished item of work, as per table 400.13 of technical specification clause 406 MORTH(5th Revision). excluding GST & Seignoriage Charges
1183.1
2460
2910840.08
Development KMTP;Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401(5th revision) and as directed by the Engineer-in-charge.
949.15
2131
2023113.22
Development KMTP;Construction of Embankment with useful gravel from approved source with all leads and lifts, transportation to site, including spreading,grading, watering and compacting each layer not more than 200mm thick to required proctors density with OMC compaction with vibratory roller of 8 to 10 Tonnes capacity as per requirement of table 300.2, maintaining the required camber in the formation including all labour charges, hire & operational charges of power roller, mortar grader, water tanker, all water leads, etc.complete as per Technical Specification clause 305 MoRTH, except GST.
6050.6
840
5087949.54
Development KMTP;Excavation for road way in hard rock (requiring blasting) by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and lead upto 1000 metres and all overhead and contractors profit all taxes except GST etc., complete for finished item of work.
726
254
184440.3
Development KMTP;Earthwork excavation in marshy soil for road way and storm water drain in soil up to 300mm by mechanical means including cutting and pushing the earth to side of embankment filling in central verge upto a lead of 50 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and all overhead and contractors profit all taxes except GST etc., complete for finished item of work for trench cutting and storm water drains as per MOR&H specification No.301 and as directed by the Engineer-in-Charge (based on level payment).
3630
152
553575
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements