Telangana State Industrial Infrastructure Corporation Limited Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
149796Bid Award Id
ViewTender No
26/CE/TSIIC/2019-20, Dated: 25.10.2019Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work excavation for BUILDING foundations for Ordinary Rock (not required blasting )and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges, excluding GST etc. as per SS 20B (ApSS 308) in Ordinary Soil-Manu Means
-
-
-
... More
Ordinary rock excavation Up to 3 m
25
-
370.9
... More
Ordinary rock excavation 3m to 4 m
2
-
422.8
... More
Earth work excavation for BUILDING foundations for Hard Rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges, excluding GST etc as per SS 20B (APSS 308) ( excavated rock to be stacked and 40% volume to be deducted for voids) for Hard rock.
-
-
-
... More
Hard rock excavation Up to 3 m
94.11
-
2017.6
... More
Hard rock excavation 3m to 4 m
5
-
2300
... More
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P, excluding GST etc., complete for finished item of work.
50
-
36.6
... More
Conveyance of excavted soils with a lead 15 km and disposing as dirreted by the Engineer- In - Charge including loading,unloading all incidental and operational charges, excluding GST etc. complete for finished item of work.
15
-
231.5
... More
Filling with approved quarry rubbish filling in trenches, sides of foundations and basement with initial lead of foundations in lead not exceeding 15 cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to site and all operatonal, incidental, labour charges, hire charges of T & P, excluding GST etc., complete for finished item of work.
25
-
390.1
... More
Filling with approved Gravel filling from out side in trenches, sides of foundations and basement with initial lead of foundations in lead not exceeding 15 cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to site and all operatonal, incidental, labour charges, hire charges of T & P,excluding GST etc., complete for finished item of work.
115
-
414
... More
PCC & RCC WORK
-
-
-
... More
Plain Cement Concrete (1:4:8) proportion nominal mix cement: 50%fine aggregate & 50% of Quarry sand below 2.36 mm : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50%fine aggregate & 50% of Quarry sand below 2.36 mm, coarse aggregate, water etc. to site, excluding seigniorage charges, and including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing, excluding GST etc., complete for finished item of work.
10
-
4356.8
... More
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: 50%fine aggregate & 50% of Quarry sand below 2.36 mm : Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, 50%fine aggregate & 50% of Quarry sand below 2.36 mm, coarse aggregate, water etc. to site, excluding seigniorage charges, and including machine mixing all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing, excluding GST etc., complete for finished item of work.
23
-
5340
... More
Reinforced Cement Concrete corresponding to M-20 grade as per IS 456 (1.1:5:3) nominal mix using 20mm size nominal agreegate machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,50% of fine aggregate (sand) & 50% of quarry sand below 2.36mm, coarse aggregate, water etc., to site and excluding seigniorage charges, including all operational, incidental and labour charges such as mixing, laying concrete, curing, excluding GST etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING, but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-20 NOMINAL MIX Centering with Steel up to 3.66M. For Lintels -Ground Floor
4.4
-
12956.8
... More
Supply and placing of the Design Mix Concrete of M 30 Grade corresponding to IS 456 using minimum 400 Kg per cum, using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher, including with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,50% of fine aggregate ( natural sand) & 50% of quarry sand below 2.36 mm , coarse aggregate, water etc., ., to site and excluding Seigniorage charges, including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing,excluding GST etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For Footings & Foundation
25
-
10808.5
... More
Supply and placing of the Design Mix Concrete of M30 Grade corresponding to IS 456 using minimum 400 Kg per cum, using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher, including with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,50% of fine aggregate ( natural sand) & 50% of quarry sand below 2.36 mm , coarse aggregate, water etc., ., to site and excluding Seigniorage charges, including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing, excluding GST etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
... More
Columns & RC Wall
-
-
-
... More
Up to 5th Floor: (3.60 mts Height)
10.5
-
14315.2
... More
Up to 5th Floor: (5.49 m Height)
7.5
-
16410.4
... More
Supply and placing of the Design Mix Concrete of M 30 Grade corresponding to IS 456 using minimum 400 Kg per cum, using WEIGH BATCHER / concrete MIXER with attachment of weigh batcher, including with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,50% of fine aggregate ( natural sand) & 50% of quarry sand below 2.36 mm , coarse aggregate, water etc., ., to site and excluding Seigniorage charges, including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, excl;udimng GST etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work.
-
-
-
... More
BEAM M-30 Grade
-
-
-
... More
Height Up to 5.49 m (up to 5th floor)
13.75
-
15378.8
... More
Slab 150 mm Thick Slab : M-30 grade
-
-
-
... More
Height Up to 5.49 m (up to 5th floor)
140
-
2000.2
... More
Sunshade -Chajjas 75 mm thick
-
-
-
... More
Height Up to 5.49 m (up to 5th floor)
31
-
1536.7
... More
Reinforcement Steel & Structural Steel Works
-
-
-
... More
Supplying, fitting and placing,Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying, excluding GST etc., complete for finished item of work in all floors
-
-
-
... More
For all Floors
3.54
-
59466.1
... More
Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc including cost of fixing in position, excluding GST etc. complete for finished item of work.
1
-
120062.7
... More
BRICK WORK
-
-
-
... More
Brick Masonary with Fly ash brick Class 5 of size 290x225x140 mm in super structure, compound wall /super structure of buildings parapet walls with cement mortar (1:6) prop (Cement:sand) using 290x 225 x 140mm from approved source having minimum crushing strength of not less than5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, excluding GST etc., complete for finished item of work as per SS 504.
-
-
-
... More
Ground Floor
67
-
7469.5
... More
Plastering:
-
-
-
... More
Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, excluding GST and as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904)
-
-
-
... More
Ground Floor
180
-
552.1
... More
Plastering to Walls with 12 mm thick for walls in two coats with base coat of 9mm thick in CM (1:6) and top coat of 3mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, excluding GST and as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904)
-
-
-
... More
Ground Floor
210
-
528.2
... More
Plastering to walls with 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves, excluding GST and as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm
-
-
-
... More
Ground Floor
385
-
566.7
... More
Painting:
-
-
-
... More
Painting to new walls with 2 or more coats of Acrylic exterior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges,excluding GST etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
405
-
257.8
... More
Painting to new walls with 2 or more coats of Acrylic interior emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, excluding GST etc. complete for finished item of work as per SS 912 for external walls for:-Interior Colouring - Plastic emulsion paint - 3 Coats
260
-
185.9
... More
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, excluding GST etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty
-
-
-
... More
Ground Floor
385
-
425.2
... More
White washing two or more coats with white cement paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges,excluding GST etc., complete for finished item of work, but excluding conveyance charges of materials for:-White wash - White washing 2 or more coats with white cement
385
-
44.3
... More
Providing and applying synthetic plaster putty or equivalent putty for internal walls such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper180 & 320 number , Sand the surface, clean & wipe off loose dust, applying putty/ filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges,excluding GST etc. complete for finished item of work for internal walls - including cost of access scaffolding for:-internal Colouring - Providing Putty
-
-
-
... More
Ground Floor
210
-
242.7
... More
FLOORING WORKS
-
-
-
... More
Providing and laying VDF flooring with design mix plain cement concrete of grade M30 with minimum cement content of 400 kgs using 20 mm down graded coarse aggregate by weigh batching using Vacuum Dewatering procedure "TREMIX" including cost and conveyance of all material to site, all labour charges, all incidental charges, hire and operational charges of T&P excluding seignorage charges, all necessary dewatering, form work with steel channel sections, casting in panels of specified size and thickness, wherever necessary to shape and depth as specified, mechanical vibration using needle and screed vibrators, excluding GST for any specified thickness, etc complete for finished item of work.
-
-
-
... More
Flooring Concrete 150mm thick
23
-
7154.6
... More
A vatta (Gola) is then prepared with brick bats using C.M 1:3 admixed with with water proofing compound like the CICO NO:1 or approved equivalent make at the junction between the slab and wall. The vatta is further plastered with 20 mm thick C.M 1:3 mixed with with water proofing compound like the CICO NO:1 or approved equivalent make above said. Rate shall include for conducting leakage test at terrace by storing water on the terrace for about 25 mm depth continuously for a period of 7 days and all as per manufacturer's specification excluding seignorage charges and as directed by Engineer-in-Charge ,excluding GST etc. complete for finished item of work.
52
-
220
... More
Making khurras 450x450 mm with average minimum thickness of 50 mm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site excluding seignorage charges and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing,excluding GST etc.,complete includinghire charges scaffolding ¢ering charges for finished item of work
18
-
199.5
... More
Providing waterproofing for Terrace floor Stage-I :Preparing & cleaning the surface by air blower / mechanical means before starting application.the material must capable resisting chemicals ranging from pH 3 to 11 in continues contact without any protection and of withstanding Hydrostatic pressure of 16 bar continuous exposure for 7 days.Providing and installing of cracks /construction/ cold joints in slab, slab & wall junctions & in other areas of the slab with Catalyst Crystalline repair mortar by using Catalyst Crystalline Penecrete Mortar & finishing coat of Penetron over all treated areas Stage-II :Application of Penecoat Elastic Polyurethane Liquid Applied Membrane in combination with Peneprimer PU.Providing and applying of Penecoat Elastic Professional polyurethane liquid applied membrane, highly permanent, elastic, cold applied and cold curing, one component polyurethane membrane, used for long lasting waterproofing. Penecoat Elastic cures by reaction with ground and air moisture and provides excellent mechanical, chemical, thermal and UV resistance properties having 800% elongation & tensile strength 4N/mm ² as per ASTM D 412 / DIN 52455, up to 2mm crack bridging capacity as per EOTA TR-008 & resistance to water pressure up to 1m water column as per DIN EN 1928 Application which includes cleaning and brushing the concrete surface, grouting the porous area with cement grout if required & treating all construction joint with non shrink crystalline mortar. Application single coat of PU primer @ 0.100kg & 2 coats of Penecoat elastic 0.5kg to 0.6kg each, polyurethane coating with minimum reinforcement 4 inch width strip of
160
-
965.7
... More
40gsm PP geotextile / Glass mesh on typical locations like wall & floor junctions chimneys ect.. as per manufacturer's specifications approved by Consultants. the treatment includes necessary treatment along the vertical surfaces and inverted beams up to 300mm. Measurements shall be considered at actual treated area Terrace slab waterproofing with Penecoat Elastic Polyurethane Liquid Applied Membrane Stage-III :Protection Screed of M20 over PU membrane at terrace area as discussed will be under your scope Providing and laying 75mm thick (average) M20 grade concrete protection screed shall laid be in panels along with polypropylene fibers( 0.90kg/Cum), 12mm and down size aggregates and coarse sand over waterproofing to proper Slopes including top surface shall be finished with 12mm thick waterproof plaster with CM 1:3. the grooves to be made about 6mmX10mm size at 5mX5m intervals including filling the same with weather resistant sealant & self leveling PU sealant like U Seal 816 Make as per the specifications. including all incidental and operational ,labour charges and ,excluding GST etc. complete for finished item of work for all floors and all levels
-
-
-
... More
Supplying and fixing Ceramic based SRI tile of size 300 x 300mm having SRI above 79 laid over the coat of epoxy mixed screed plaster and grouted the joints with epoxy base mortor ie. Laticrete base MORTOA and Laticrete Epoxy mortor for grouting. PRODUCT : AB CERAMICS ,including all operational, incidental and labour charges such as mixing, laying, curing, excluding GST etc.,complete for finished item of work for all floors and all levels.
160
-
3250.5
... More
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, M.S guide channels with 2.00mm , stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of M.S hood cover with 1.22mm thick and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories, excluding GST etc complete for finished item of work as per special Spec: 1108
11.5
-
4441.2
... More
Supply and fixing Aluminium Anodised Sliding windows of Two Track as per approved drawing with aluminium anodised sections of Series -B (18 mm) Jindal Hollow sections an Top and 4 Nos of Side vertical section of frame of Jindal catlog-B (18 mm) Series No.20619 of size 61.85 x 31.75 mm @ 0.659Kg/Mt ,Bottom frame of Jindal catlog-B (18 mm) Series No.20619 of size 61.85 x 31.75 mm @ 0.695Kg/Mt, Shutter interlock frame of Jindal catlog-B (18 mm) Series No.20845 of size 40 x 18 mm @ 0.547 Kg/Mt, Shutter Top & Bottom frame of jindal catlog-B (18 mm) Series No.20844 of size 40 x 18 mm @ 0.456 Kg/Mt ,Shutter side handle frame of Jindal catlog-B (18 mm) Series No.20846 of size 40 x 18 mm @ 0.456Kg/Mt, with Tinted glass of approved clour with 6mm thick glass , fixing inluding supply and fixing of 2 No for each shutter Nylon rollers, Push button handle for each shutter , Rubber Beading, all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixings hutter to frame, excluding GST etc.completed for finished item of work
-
-
-
... More
Windows
35
-
3313.4
... More
Supply and fixing of Supply and fixing Aluminium Anodised louvered ventilaters as per approved drawing with aluminium anodised sections of Jindal Box sections an Top ,bottom and Side vertical section of frame of Jindal catlog- Series No.14073 of size 63.5 x 38.10 x 1.70 mm @ 0.901Kg/Mt ,Channel frame of Jindal catlog- Series No.15605 of size 12.70 x 12.70 x 1.09 mm @ 0.105Kg/Mt, with pin head glass of approved clour with 5mm thick glass , fixing inluding , all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixings hutter to frame, excluding GST etc.completed for finished item of work
-
-
-
... More
Louvered ventilators
14
-
3016.8
... More
Supply and Fixing of 110 mm dia single Socket PVC/SWR pipe - 6Kg/sq.cm -Prince/ Sudhakar/ Kisan/ Supreme or any ISI Brand,including labour charges for laying,fixing and commissioning the PVC pipes including cuplures,bends,T's etc. with solvent jointing as per standard practiece w ork but excluding cost of specials, excluding GST etc.complete for finished item of work
-
-
-
... More
110 mm dia.
36
-
333.6
... More
ELECTRICAL PART:
-
-
-
... More
Sub Head I : LT PANELS : Supply, installation, Testing and Commissioning of 3phase and Neutral 415V, 4 wire Free Standing, Floor mounted MV panel made out of 2mm thick CRCA sheet after seven tank process and Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A per Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switch gear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have at least two spare cubicles of the maximum outgoing MCCB rating.
-
-
-
... More
The Panels shall be mounted on ISMC-75 including supply and fixing of the same. Every ACB shall be provided with ON/OFF/Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All MCCBs shall be provided with microprocessor based releases & with Neutral link. The fault level indicated in the Schedule are the minimum ratings All Switchgear shall have Rotary Handles. All CTs shall be Cast Resin Type (CRT). All the Panels shall have provision for extending on both the sides. All Incomers Switchgears shall have 4NO + 4NC Auxilliary Contacts inbuilt. The panel shall be extendable type on both the sides.
-
-
-
... More
MAIN LT PANEL -1: Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as specified. Incomer 1 No.800 AMPS 4 Pole ACB, 50 KA Draw Out ( EDO )Type Four Pole Microprocessor based relay having protection for Over current, short circuit with time setting and 6NO + 6 NC,indication for test,service,isolated ON /OFF/ trip indications, ShutterAssembly,Racking, Mechanical & Electrical interlock Metering Compartment 1 No- Digital Load Manager of Enercon Make (No.3460) or eqvt. With RS 485 Modubus protocal 1 Set – 800/5A CT CL 1 15VA for Measurement 1 Set –800/5A CT CL 1 15VA for PF Correction Relay 1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control fuses and Ammeter and Voltmeter. 1No - Earth fault relay b) DG Incomer 1 No.800 AMPS 4 Pole ACB, 50 KAhaving protection for Over current, short circuit with time setting and 6NO + 6 NC,indication for test,service,isolated ON /OFF/ trip indications, ShutterAssembly,Racking, Mechanical & Electrical interlock Metering Compartment 1 No. Multifunction Meter With RS 485 MODUBUS protocal with suitable CTs 1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control fuses and Ammeter and Voltmeter Outgoings 630A TPN 50 KA MCCB – 6 Nos 400A TPN 35 KA MCCB - 4Nos 160A TPN 25KA MCCB – 3 Nos 125A TPN 25 KA MCCB -3 Nos 6-32A 10KA SPMCBs- 18 Nos 4 Pole 4 Module 40KA 1.4KV Voltage Surge Protector All the MCCBs are with manual closing mechanism and with thermal and magnetic based trip units Busbars 415V, TPN, 3 Phase, 800A, 50KA, 4Wire Al. Bus Bar Panel to be of Type 4b Construction complete with required interconnections, control fuses, Selector switches etc. & with indication lamps for ON, OFF, TRIP for all outgoing feeders.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:- Siemens / Legrand / L&T
1
-
1581365
... More
APFC PANEL -1 Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached including nec Incomer 630A TPN MCCB 35KA Thermal Based Trip unit with ON/ OFF / TRIP indication Lamps - 1Nos. 1 No Automatic Power factor correction relay for automatic correction of Power factor Outgoings a. 250A, TP MCCB 35KA, Thermal Based trip unit along with 50 KVAR Capacitor Banks - 2 Nos. b. 125A, TP MCCB 25KA, Thermal Based trip unit along with 25 KVAR Capacitor Banks - 2 Nos. c. 125A, TP MCCB 25KA, Thermal Based trip unit along with 20 KVAR Capacitor Banks - 1 Nos. d. 63A, TP MCCB 16KA, Thermal Based trip unit along with 10 KVAR Capacitor Banks - 2 Nos. e. 63A, TP MCCB 16KA, Thermal Based trip unit along with 5 KVAR Capacitor Banks - 1 No.Bus Bar - 415V, TPN, 3 Phase,630A, 35KA, 4Wire Al. Bus Bar Panel to be of modular Construction complete with required interconnections, control fuses, Selector switches etc. & with indication lamps for ON, OFF,.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:- Siemens / Legrand / L&T
1
-
485516
... More
MAIN LIGHTING SWITCH BOARD Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached including nec Incomer - 400A, TPN MCCB 35KA, Thermal Based trip unit with CT, Ammeter & Voltmeter Outgoing a.125A TPN MCCB 25KA Thermal Based Trip unit – 4 Nos b.63A TPN MCCB 16 KA Thermal Based Trip unit –2Nos c.6-32A SPMCBs 10 KA –6Nos Bus Bar - 415V, TPN, 3 Phase, 315A, 35KA, 4Wire , Al. Bus Bar Panel to be of Type 4a Construction complete with required interconnections, control fuses, Selector switches etc. & with indication lamps for ON, OFF, TRIP for all outgoing & incoming feeders. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:- Siemens / Legrand / L&T
1
-
252253
... More
MAIN POWER PANEL Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached including nec Incomer – 400A, TPN MCCB 35KA, Thermal Based trip unit with CT, Ammeter & Voltmeter- 1 No. Outgoing a. 250A TPN MCCB 35KA Thermal Based Trip unit – 3 Nos b. 125A TPN MCCB 25KA Thermal Based Trip unit – 2 Nos c. 63A TPN MCCB 16KA Thermal Based Trip unit – 1 No d.6-32A SPMCBs 10 KA –7Nos Bus Bar - 415V, TPN, 3 Phase, 400A, 35KA, 4Wire , Al. Bus Bar Panel to be of Type 4a Construction complete with required interconnections, control fuses, Selector switches etc. & with indication lamps for ON, OFF, TRIP for all outgoing & incoming feeders. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.Makes:- Siemens / Legrand / L&T
1
-
309418
... More
AC PANEL Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached including nec Incomer – 630A, TPN MCCB 35KA, Thermal Based trip unit with CT, Ammeter & Voltmeter Outgoing a. 250A TPN MCCB 35KA Thermal Based Trip unit – 3 Nos b. 125A TPN MCCB 25KA Thermal Based Trip unit – 1 No c.6-32A SPMCBs 10KA –5 Nos Bus Bar - 415V, TPN, 3 Phase, 630A, 35KA, 4Wire , Al. Bus Bar Panel to be of Type 4a Construction complete with required interconnections, control fuses, Selector switches etc. & with indication lamps for ON, OFF, TRIP for all outgoing & incoming feeders. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes:- Siemens / Legrand / L&T
1
-
271812
... More
DISTRIBUTION BOARDS Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No.32A TPNMCB as Incommer and 3 Nos 32A DP ELCB with 30mS and 12 Nos 6A SPMCBs as out goings etc complete of Makes : Legrand / Schneider / Siemens / L&T / Cabtree Xpro. LDB-S/S Incomer 32 A TPN MCB 1 No. Outgoing 32A DP ELCB with 30 mA - 3 Nos 6A SPN MCB 3 X 4 (12 Outgoings),The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
18280
... More
Supplying and fixing of following size of Aluminium conductor cable, 11 KV grade, XLPE,double steel tape armoured, HV cable 3 core, Earthed, as per IS:692/73, with amendment 1 to 6
-
-
-
... More
Supply and laying of3C X 300 sq.mm. HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85 with latest amendments. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / Gloster.
30
-
2163
... More
Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 240-300 Sqmm with necessary materials etc., complete. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Transeal - Hong shang / Raychem / M Seal
3
-
17150
... More
Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 240-300 Sqmm with ecessary materials etc., complete. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Transeal - Hong shang / Raychem / M Seal /
Multy.
3
-
14904
... More
LT CABLES Supplying and laying of PVC insulated,XLPE, aluminium conductor, 1.1 KV grade armoured, MV cable of the following sizes as required, generally conforming to IS:1554/Part-I/1970
-
-
-
... More
Supply and laying of 300 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
830
-
1684
... More
Supply and laying of 240 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
390
-
1386
... More
Supply and laying of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
1000
-
639
... More
Supply and laying of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
910
-
489
... More
Supply and laying of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
10
-
241
... More
Supply and laying of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) including labour charges etc., complete Makes : Torrent / Unicab / Polycab / Havells / Gloster / KEI / Finolex/ Paragon
15
-
173
... More
LT CABLE END TERMINATION
-
-
-
... More
Supply and Installation of cable end termination with brass single compression gland and Aluminium lugs for the following sizes of PVC Insulated XLPE Aluminium armoured conductor cable of 1.1KV grade complete as required.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
... More
3.5 x 300 sqmm XLPE Al. Ar.
40
-
807
... More
3.5 x 240 sqmm XLPE Al. Ar.
12
-
649
... More
3.5 x 95 sqmm XLPE Al. Ar.
16
-
306
... More
3.5 x 70 sqmm XLPE Al. Ar.
8
-
306
... More
3.5 x 25 sqmm XLPE Al. Ar.
2
-
224
... More
4 x 10 sqmm XLPE Al. Ar.
2
-
178
... More
Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for the following cable sizes including nuts and bolts with connections.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
-
-
-
... More
3.5 x 300 sqmm XLPE Al. Ar.
80
-
593
... More
3.5 x 240 sqmm XLPE Al. Ar.
24
-
433
... More
3.5 x 95 sqmm XLPE Al. Ar.
32
-
166
... More
3.5 x 70 sqmm XLPE Al. Ar.
16
-
139
... More
3.5 x 25 sqmm XLPE Al. Ar.
4
-
168
... More
4 x 10 sqmm XLPE Al. Ar.
4
-
10
... More
CABLE TRAYS
-
-
-
... More
Supply and Installation of 750mm x 75mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
370
-
1085
... More
Supply and Installation of 450mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
40
-
1003
... More
Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
250
-
285
... More
Supply, fixing and transportation of 38W, 3800 lumens, 1200mm length T5 / T8 LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: 2KV, THD10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired desired by the department and as per IS specifications, minimum CRI≥80,.etc., complete with 5 years warranty including labour charges for fixing etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips /Crompton / Bajaj/Fortune Art
12
-
922
... More
Supply, fixing and transportation of 20W, 2000 lumens, T5 / T8,1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection,PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. LUMINAIRE MAKE: Phillips /Crompton / Bajaj
12
-
1208
... More
Supply and fixing of ISI 20mm outer dia medium grade, FRLS with IS:9537 part 3 regid PVC pipe, 19/20mm PVC Bends, Junction Boxes Normal with dummy cover, 1.5mm thick PVC Bends including labour charges for fixing etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Sudhakar/Finolex/Modi/VIP/Precicison/Universal/Million Plast
150
-
92
... More
Supply and fixing of ISI 25mm outer dia medium grade, FRLS with IS:9537 part 3 regid PVC pipe, 25mm PVC Junction Boxes Normal with dummy cover,, 1.5mm thick PVC Bends including labour charges for fixing etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make-Sudhakar/Finolex/Modi/VIP/Precicison/Universal./Million Plast
20
-
99
... More
Supply and laying of 3 runs of 36/0.3mm (2.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
20
-
106
... More
Supply and laying of 3 runs of 22/0.3mm (1.5 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable and laying the cable in the existing pipe including all labour charges etc.,complete.(For Power Sockets Wiring),the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Finolex / Havells/ Polycab(HR_FR-LF)
195
-
73
... More
Supply and erection for approved make 1No 2/3pin 6A modular universal socket with 6A modular switch mounted on GI metalic box covered with appropriate modular front plate as directed by the Dept. including conveyance and all materials and labour charges etc.,on separate board complete for Raw Power Points.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus/Cabtree Amare.
2
-
744
... More
Neutral Earthing (500KVA Transformer & 800KVA Transformer (Future)
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
4
-
28071
... More
Body Earthing
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
7
-
19633
... More
Supply and laying of50X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 50 x 6mm Cu. (Trf. Neutral Earthing)
50
-
1873
... More
Supply and laying of 25X6mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels.,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 25 x 6mm Cu. (Main Earth Grid)
160
-
948
... More
Supply and laying of 25X3mm copper earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 25 x 3mm Cu. (Panel Body Earthing)
150
-
480
... More
Supply and laying of 8SWG Bare Copper wire including excavation and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and Panels ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. 8 SWG Copper ( DB Earthing)
10
-
91
... More
Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
4431
... More
Supply and fixing of PVC synthetic elastomer electrically insulated mat with class A insulation conforming to IS: 15652-2006 having 2mm thickness upto 3.3KV.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
30
-
4317
... More
Supply and fixing of G.I sheet bucket of 9Ltrs capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom, round bottom bucket with sand, duly painted with enamel white inside & red out side and letter FIRE with black colourin cluding required stand for holding sand buckets etc complete. ,the cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. of 9 Ltrs.
4
-
407
... More
Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint. The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
3
-
1287
... More
Supply and fixing of First Aid box 18" x 12" x 8" with Set of Cotton, band aid cloth Antiseptic cream etc.,complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
1545
... More
Supply and fixing of Shock instrution chart in English / Hindi /Telugu duly framed with front glass including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
521
... More
Supply and fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982 including labour charges etc., complete.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
2
-
253
... More
Supply and fixing of ABC Powder MAP 4 Kg Fire extinguisher Mono ammonium phosphate power 90, stored pressure type, IS 15683 : 2006, pressure gauge gross wt. 6.9 kg, empty wt.2.9 kg, can Ht.440mm, Diameter 140mm, Discharge time less than 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fires, A- rating 3A, B-rating 34B, can construction: Deep drawn Co2 mig welding, wall construction: Forging & Machining, internal coating of can: Epoxy power coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leakage detection tested, ISI & CE approved with 5 years warranty.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge. Make: Cease Fire / Minimax
2
-
6434
... More
Obtaining drawing approval from Electrical Inspectorate / CEA including preparation of drawing. Arranging inspection and obtaining safety certificate with necessary incidental charges for CEIG etc. Obtaining load sanction, necessary co-ordination etc. with APSEB and energise the entire installation etc. Note: Necessary statutory fee payable to Local Electrical Authorities / Telangana State will be paid by the Client against Demand Notice.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
250000
... More
Relocating the following existing equipments on to a mezzanine HT Panel, 500KVA Dry Type Transformer, AMF Panel, Battery with Battery Charger& DCDB.The cost including all incidental and operational charges, labour charges, seigniorage charges, cost and conveyance of all materials etc excluding GST, complete for finished item of work. The work is to be carried out as per the specifications and requirement of site conditions under the guidance of Engineer-In-Charge.
1
-
4595
... More
No of Items: 76
-
-
-
... More
(Rupees One Crore Twenty Two Lakhs Six Thousand and Sixty Seven Only)
-
-
-
... More
PART - I ECV VALUE Rs.
-
-
-
... More
PART- II Seniorage charges Rs.
-
-
-
... More
Note :
-
-
-
... More
1) The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit. The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons labour welfare cess, District mineral fund and work insurance and no reimbursement for these will be made. 2)The above rates for finished items of work including cost and convenyance of all requisite materials to site, Labour Charges for all operationas, curing wherever needed, all Incidental, Hire and Operational charges of all T&P barricading, Diversion of traffic etc., including all taxes except GST & Seigniorage Charges .
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements