Telangana State Industrial Infrastructure Corporation Limited Tender

CC Road Autonagar;Providing gravel berms with good gravel obtained from outside to the required thickness including spreading in layers of 150 mm thick with side slope of 2:1(2H:1V),sectioning each layer to proper camber, watering, consolidation of each layer with vibratory roller of 8 to10 tonnes capacity to achieve desired density at OMC including cost conveyance of gravel, water etc., to site, labour charges for all operations, hire and operational charges of vibratory roller and other T&P diversion of traffic, etc., complete for finished item of work,as per MORT&H (5th Revision) Spc.No.401, excluding GST & Seignoriage Charges

CC Road Autonagar;Construction of un-reinforced Plain Cement Concrete M30 grade over a prepared sub base, coarse aggregate (crushed stone well graded hard granite metal of 20mm size as per table 600-3) and fine aggregates (50% River sand, 50% Rock sand) conforming to IS:383, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design with minimum cement content of 350 Kg/Cum laid in alternate panels with approved fixed side formwork of steel channel, wedges, steel plates including levelling the formwork as per drawing, cleaning the surface with air compressor initially and finally, laying and fixing of 125 micron thick approved polythene film made of 100% virgin LDPE, laying and spreading the concrete with sholves, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation to lines and grade, curing of concrete slabs for 14 days including cost, and conveyance of all material to site, all labour charges for all operations, hire and operational charges of all T&P, diversion of traffic etc., complete for finished item of work as per drawing and technical specification. Excluding GST & Seigniorage charges.

CC Road Autonagar;Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } conforming to table 1000-2 of MORT&H specification including cost,conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges.