Telangana State Industrial Infrastructure Corporation Limited Tender

For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.

Telangana State Industrial Infrastructure Corporation Limited - TSIIC Tender

Works
Civil And Construction
Solid Waste Management
Water Storage And Supply
Opening Date10 Jan 2025
Closing Soon27 Jan 2025
Tender Amount₹ 4,27,99,883 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
WSS KMTP;Supply, erection, testing and commissioning of 28W recess/surface mounted LED Luminaire Box type with CRCA housing and all standard accessories Makes : Phillips / Crompton / Bajaj / Surya/ Havells.

7

1674

11718

... More
WSS KMTP;Supply & Erection of procelin Insulator with required fixing materials for lightning conductor supporting

20

119

2385.91

... More
WSS KMTP;Providing earth electrode of low carbon steel rod, UL listed of 25 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of Earthplus ULTRA high grade earthing compound IEC 62561-7 complaint Ecofriendly, Maintenance free, anti corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance <0.20 ohms-meter, should be leach proof & sulphur free complete with earth inspection chamber of dimensions : Width : 320 mm x 320 mm, Height : 192 mm, Weight : 30 Kgs, Load bearing capacity : 5000 Kgs including drilling of bore in any kind of soil.

1

23501

23501.26

... More
WSS KMTP;Supply of electro-Mechanical counter Makes: EARTHPLUS (THUNDER GUARD) / NIMBUS / KALRE / FOREND.

1

21609

21609.57

... More
WSS KMTP;Installation and commissioning of advanced lighting protection systems which includes 1. 50mm dia C class GI mast with base plate of length 5.0 Mtrs with FRP coller (Insulating bush).2. Laying of CC Bed 3. Installation of Lighting Rod4. Laying of Down conductor5. Installation of Counter6. Installation of Earth Electrodes 7. Interconnection between the Electrodes8. Specialised supporting guy wire and all fitting accessories.9. Termination of down conductor to earth bus etc complete

1

42060

42060.27

... More
WSS KMTP;Supply and installation of advanced lighting protection with 205 -580mm height and 4.60 - 4.940 kgs, and having Rod length 760mm, weight 1.795 kgs with stainless steel rod, working on the principle of (ESE) Early Streamer Emission technology, having a coverage radius of 79 Mts under level 1 protection and 107 Mtrs radius under level 4 protection when mounted on 5 - 15 mts height of existing lattice tower giving level 1 protection and anticipation emission time of 60 - 72 micro seconds. The ESE should be manufactured according to standard NFC 17-102 : 2011 and CE certified including functional integrity etc Complete. Make : EARTHPLUS (THUNDER GUARD) / NIMBUS / KALRE / FOREND./Equivalent approved make.

1

164219

164219.12

... More
WSS KMTP;Supply and erection of cable route indicator

3

961

2883

... More
WSS KMTP;Supply and fixing of ABC Powder MAP 4 Kg Fire extinguisher Mono ammonium phosphate power 90, stored pressure type, IS 15683 : 2006, pressure gauge gross wt. 6.9 kg, empty wt. 2.9 kg, can Ht.440mm, Diameter 140mm, Discharge time less than 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fires, A- rating 3A, B-rating 34B, can construction: Deep drawn Co2 mig welding, wall construction: Forging & Machining, internal coating of can: Epoxy power coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leakage detection tested, ISI & CE approved with 5 years warranty Including transportation, all taxes and all labour charges etc complete.

1

4834

4834.32

... More
WSS KMTP;Supply and fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.

1

540

540

... More
WSS KMTP;Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV

1

5643

5643.26

... More
WSS KMTP;Supply and Installation of 100mm x 25mm x 1.6mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. including all taxes,transportation and labour charges etc., complete

10

318

3180

... More
WSS KMTP;Earth digging, brick and sand laying, back filling and compacting work (for LT cable)

60

525

31500

... More
WSS KMTP;25x6mm GI strips

44

198

8712

... More
WSS KMTP;10SWG Tinned CU wire

30

113

3419.4

... More
WSS KMTP;8SWG CU wire

20

163

3271.2

... More
WSS KMTP;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

2

10850

21700

... More
WSS KMTP;Supplying and fixing of 2kVAR capacitor bank with required adaptor box

1

1411

1411

... More
WSS KMTP;Supply and Fixing of 6 Way SPNDB with IP 43 Protection arrangement with 25A DP RCCB as Incomer and 6 Nos of 6-25A, SP MCB as out goers for Lighting/power distribution complete with cost of including all taxes, transportation and labour charges etc., complete.Makes:Legrand / Schneider.

1

11002

11002

... More
WSS KMTP;STARTER PANEL: Design, Fabrication , Erection,Testing and commissioning of Starter Panel - Indoor type self standing floor mounting made out of 16SWG of size CRCA sheets, 7 tank process power coated complete including following switchgears with all charges including labour etc., complete RYB Indiaction lamp Ideal make - 3 sets Multi Display Meter - 1 Nos Current Transformer 16/5A 15VA class 1 - 1 Set Busbar Support : SMC Busbar size :40A,TPN,3phase,4 WIRE AL . BUS, RS 485 port Incomer - 32A 4P MCCB - 1 nos. MCCB of 4P Micro processor based with O/L, S/C, E/F protection, Outgoing - 20A TPN MCCB - 3 nos, 16A TPN MCCB - 2 nos and 25A DP MCB - 1 nos. with all starter outgoing feeders are automatic/ manual option with DOL starter arrangements including contactor relays etc as required. Including all outgoing feeders individually R Y B indication lamps, ON OFF TRIP Indication lamps, ON OFF push button with indication, auto/manual selector switch etc as required as per requirements

1

107100

107100

... More
WSS KMTP;3Cx2.5Sqmm cu.Ar Cable

2

616

1232

... More
WSS KMTP;4Cx2.5Sqmm cu.Ar Cable

2

673

1346

... More
WSS KMTP;4Cx6Sqmm Al.Ar Cable

8

586

4688

... More
WSS KMTP;Supplying and making end termination with Single compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.with all materials including all taxes,transportation and labour charges 4Cx10Sqmm Al.Ar Cable

2

641

1282

... More
WSS KMTP;3Cx2.5Sqmm CU.Ar Cable

10

286

2860

... More
WSS KMTP;4Cx2.5Sqmm CU.Ar Cable

10

354

3540

... More
WSS KMTP;4Cx6Sqmm Al.Ar Cable

35

250

8750

... More
WSS KMTP;Supply, laying, of XLPE insulated,1100V grade Armored Aluminium LT cables of following sizes laid on wall/ cable trays/under ground including cost and conveyance of all materials including all taxes,transportation and labour charges etc., complete. Make:Torrent / Universal / CCI / Unicab. 4Cx10Sqmm Al.Ar Cable

60

312

18720

... More
WSS KMTP;Supply and fixing 1 no. of 6/16A (5 pin) socket (Universal Type) with 1 no of 16A modular switch control mounted on GI box covered with modular cover plate including cost and conveyance of all materials including all taxes,transportation and labour charges etc. Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal GIFA / GM-Zenova/ L&T- Englaze

4

827

3308

... More
WSS KMTP;Supply, Fixing of 6A 2 in one socket 6A Modular type Switch control GI flush boxes with cover plate fixing on common board including all taxes, transportation and labour charges.Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal GIFA /GM-Zenova/ L&T- Englaze

1

727

727

... More
WSS KMTP;Supply, Fixing and Wiring with 3 runs (phase, neutral & Earth) of 22/0.3mm (1.5 Sq.mm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with following 6A modular type switch control with front plate, GI Deep box , 3-pin Ceiling rose/BH/SBH, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including all taxes,transportation and labour charges. Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). One point controlled by one 6A Switch

15

1189

17835

... More
WSS KMTP;Supply and run of 3 runs (phase, neutral & Earth) of 36/0.3mm (2.5 sq.mm) HFFR, P.V.C. insulated 1100V grade as per IS:694/1990 flexible copper cable in existing PVC conduit pipe for circuits including all taxes,transportation and labour charges etc., complete for incoming of switch box and 6A sockets Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR).

125

186

23250

... More
WSS KMTP;Supply and Fixing of 20mm dia heavy grade,2.1mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Point wiring Make:Sudhakart ISI/Modi/Atul)

120

122

14640

... More
WSS KMTP;Electrical Works Supply and Fixing of 25mm dia heavy grade,2.2 mm thick P.V.C. pipe (ISI MARK)in slab/ceiling mounted/ concealed in wall with all required accessories like bends,junction boxes etc.., including masonary work including all taxes,transportation and labour charges etc., complete. for Run of mains for light, fan points & power points. Make:Sudhakart ISI/Modi/Atul)

125

135

16875

... More
WSS KMTP;Re filling foundation/ basement with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, all labour charges, hire charges of T&P etc., and all other taxes except GST as directed by Engineer-in-charge etc., complete for finished item of work (APSS No. 309 & 310)

10010

40

405442.51

... More
WSS KMTP;Extra for depth for manholes, Size 120x90 cm, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

11.2

12030

134736

... More
WSS KMTP;Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :

7

30010

210070

... More
WSS KMTP;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3prop; ½?thickbothinsideand outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

53

16010

848530

... More
WSS KMTP;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½?thickbothinsideand outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

5

9875

49375

... More
WSS KMTP;Supplying, fixing, testing and commissioning of glazed stoneware Clean out Plug, 300x300mm size with C.I. grating (medium duty), 100 mm dia outlet set on PCC 1:4:8 bed concrete, 115mm thick brick masonry chamber in CM 1:4, internal and external plastering of 12mm thick in CM 1:6, necessary earthwork, C.I. cover (medium duty) etc., as directed by Engineer in charge, complete finished item of work.

1057

5115

5406555

... More
WSS KMTP;200mm Dia

1200

1250

1500000

... More
WSS KMTP;Supplying, laying, jointing, testing and commissioning approved make UPVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for Under ground drainage works. The quoted rate shall include necessary earth work, fittings, pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting, refilling, and making good the same complete as required. 160mm Dia

7920

830

6573600

... More
WSS KMTP;Sewere Lines Earth work excavation by Mechanical means for foundation of Sump/OHT/Pump Room and for laying of Pipe Lines in trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B.

10200

128

1308150

... More
WSS KMTP;Re filling foundation/ basement with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, all labour charges, hire charges of T&P etc., and all other taxes except GST as directed by Engineer-in-charge etc., complete for finished item of work (APSS No. 309 & 310)

6600

40

267324.73

... More
WSS KMTP;Supply, installation in position, testing and commissioning of electrically driven End Suction bare shaft Monobloc pump of Kirloskar make with CGL make 5HP/3PHASE /2900RPM HEAD: 26 MTR DISH: 8 LPS, on a common base frame on a common base frame with coupling and coupling guard, Model: KDS-538+ 5.0 65X50 3P CII GP coupled pump set, Cast iron impeller with Gland pakcing G etc ocapable of discharging as indicated below, shall be automatic in operation with control panel, low and high level sensors of approved make provided in the centralised overhead tank which is appro. 80 m from the UG Sump, necessary cables upto the control panel in the pump house near the UG sump, accessories like pressure guages, foot valves, hose pipe, bends, cables, termination of cables, Starter panel box, earthing leads, etc., all complete finished item of work.

2

68425

136850

... More
WSS KMTP;Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg, etc., as per the instruction of Engineer-in-charge, complete finished item of work.

77

8690

669130

... More
WSS KMTP;150mm dia

3

22250

66750

... More
WSS KMTP;100mm dia

7

14130

98910

... More
WSS KMTP;80mm dia

23

10710

246330

... More
WSS KMTP;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the department, including all taxes etc., complete finished item of work. PN-10 50mm dia

18

8365

150570

... More
WSS KMTP;Labour charges for fixing Air valves including boring the mains and threading the bore fixing nipple etc., including all taxes etc., complete finished item of work. 50 mm Dia

26

270

7020

... More
WSS KMTP;Manufacture, supply and delivery and fixing of of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the department, including all taxes etc., complete finished item of work. PN-10 50 mm Dia

26

35252

916570.2

... More
WSS KMTP;200 mm dia 'C' Class

45

6630

298350

... More
WSS KMTP;Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes. 100 mm dia 'C' Class

60

3000

180000

... More
WSS KMTP;200mm OD pipe

130

1920

249600

... More
WSS KMTP;160mm OD pipe

385

1265

487025

... More
WSS KMTP;110mm OD pipe

510

630

321300

... More
WSS KMTP;75mm OD pipe

386

325

125450

... More
WSS KMTP;Supplying and laying in position HDPE pipes as per IS 4984, PE100, PN10 including transportation, laying, fixing, butt welding of joints, testing of pipes at 10 kg/sqcm, rectifying all leakages, including necessary bends, reducers, enlargers, provision of flanges as and wherever required especially near to the valves etc., all complete finished item of work. 63mm OD pipe

1830

240

439200

... More
WSS KMTP;54.00mm OD pipe - SDR 11

2447

1716

4199786.1

... More
WSS KMTP;41.30mm OD pipe - SDR 11

1983

1043

2068269

... More
WSS KMTP;34.90mm OD pipe - SDR 11

683

727

497087.4

... More
WSS KMTP;Supply &Fixing of premium make CPVC Pipes SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc., complete for finished item of work as directed by Engineer-in-charge. 28.60mm OD pipe - SDR 11

666

475

316449.9

... More
WSS KMTP;Providing and laying pumping main, Pumps, water distribution and sewage pipe line network Earth work excavation by Mechanical means for foundation of Sump/OHT/Pump Room and for laying of Pipe Lines in trenches and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B.

6620

128

849015

... More
WSS KMTP;100 mm dia

3

3520

10560

... More
WSS KMTP;Providing and fixing in RCC tank MS or GI insert with flanged / threaded ends 750mm long including puddle flange, required no. of companion flanges, bolts, nuts, rubber gaskets, a thick coat of non-setting mastic or plastic cement etc., including all other taxes except GST etc., all complete for finished item of work, as directed by Engineer-in-Charge. The contractor is responsible for leak proof puddle pipes inserted in the tank. (For UG Sump RCC walls) 150/160mm dia inlet and Outlets

6

5312

31877.1

... More
WSS KMTP;Supplying and fixing of SFRC manhole covers size of 24"x24" HD 20 with frames as the given locations of site, Manufacture as per BIS:12592 (Part 1&2) with ISI marking anywhere in T.G., F.O.R. destination including, loading, unloading & fixing the same complete all, finished item of work.

6

2850

17100

... More
WSS KMTP;Supplying and fixing of C.I. steps in the manholes, as per the direction of Engineer in charge and as per site condition, complete all for finished item of work.

42

92

3868.2

... More
WSS KMTP;Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse M-Sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

6

110

661.5

... More
WSS KMTP;Re filling foundation/ basement with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, all labour charges, hire charges of T&P etc., and all other taxes except GST as directed by Engineer-in-charge etc., complete for finished item of work (APSS No. 309 & 310)

45

40

1822.5

... More
WSS KMTP;Supply & application of PRAH Catalyst Integral Crystaline water proofing treatment to the entire quantity of the concrete of footings, raft & walls by using Penetron Admix having speed of penetration of 31 Cm in 56 days and resistance to 20 bar hydrostatic water head, using Penetron admix @ 0.8 % by weight of 350kg cement content per CuM. The material must qualify as PRAH grade (Permeability Reducing Admixture for Hydrostatic conditions) and meet the following requirements Specified in ACI-212-3R-2010 at the recommended dosage rate of 0.8% by weight of cement content which is Capable of reducing Permeability of concrete by more than 90%, compared with control concrete, when tested as per DIN 1048 part 5 (after applying 4 cycles of hydrostatic pressure) and permeability co-efficient calculated as per Valenta / Darcy?s formula & U ?sign approved as per DIN V 18998 with chloride content less than 0.1%, alkali content less than 9.3% and no negative effect on corrosion of steel reinforcement. Work shall be carried out with all necessary post construction treatement including construction joints in base slab & walls of water retaining structures with Catalyst Crystaline repair mortar at all the construction joints & the junctions of raft slab with the retaining walls etc. after cleaning the surface mechanical means before starting application. The material must capable of withstanding Hydrostatic pressure of 16 bar continuous exposure for 7 days by using Catalyst Crysaline Penecrete Mortar & finishing coat with Penetron on all construction jonts as per approved detail specification of waterproofing by the manufacturer & should submit all the test reports to support above said technical parameters. Work shall be guaranteed for 10 years against any leakages and guarantee shall be provided on Rs.100/- stamp paper in approved proforma. Make:- Penetron India Using Penetron Admix | Penetron |Penecrete Mortar as required(Protection is not required for any UGC) Raft, Slab & Walls

105

2510

263550

... More
WSS KMTP;Painting to new walls with two or more coats of Water proof cement paint of approved make, shade and colour to give uniform shade to all plastered surfaces of walls over a base coat of approved cement, primary grade making 3 coats of white cement (total 3 or more coats) in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powedered materials including cost and conveyance of all materials to work site, all other taxes except GST and all labour charges such as preparation of the wall surface, applying priming coat, applying water proof cement paint two or more coats, scaffolding as directed by Engineer-in-Charge etc., complete for finished item of work as per SS 912.

60

250

15000

... More
WSS KMTP;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, including all other taxes except GST, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary etc., complete for finished item of work for Ground floor (GLSR)

225

600

135000

... More
WSS KMTP;Plastering 12mm thick for External Walls of concrete /brick wall surfaces in two coats with a base coat of 8 mm thick in CM (1:4) and 4 mm thick top coat in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all labour charges, all operational and incidental charges, mixing mortar, finishing, scaffolding, curing, providing architectural groves at junction of Concrete, etc., all other taxes except GST and seigniorage charges on all material as directed by Engineer-in-Charge etc., complete for finished item of work. for Ground floor (GLSR)

210

580

121800

... More
WSS KMTP;Providing Ornamental Plastering to ceiling 12mm thick in two coats with a base coat of 9mm thick in CM (1:4) and top coat of 3mm thick in CM (1:3) prop. using fine sand including neat finishing, cost and conveyance of all materials like cement, sand, water, etc., to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting of grooves wherever necessary and all other taxes except GST and seigniorage charges on all materials as directed by Engineer-in-Charge etc., complete for finished item of work for Over Head Tank at 10.15 mt level. for Ground floor (GLSR)

120

600

72000

... More
WSS KMTP;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like AF Star TMT/MS Life TMT, Radha TMT, Sugna TMT etc of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)

17.37

76097

1321812.71

... More
WSS KMTP;SLABS - above 150 mm - Up to 300 mm thick

129

2163

279046.35

... More
WSS KMTP;Walls upto 3.66 mt level (250mm thick)

54

17246

931324.31

... More
WSS KMTP;Providing and laying of Vibrated Reinforced Cement Concrete corresponding to M-30 grade Design Mix Concrete corresponding to IS 456 using weigh batcher with 20mm size well graded machine crushed hard granite chips (Coarse aggregate) from approved quarry with a minimum cement content of 380 kg/CuM including cost and conveyance of all materials like cement, Coarse aggregate, Fine aggregate, water etc., to site, including centering & shuttering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centring plates etc., weigh batcher, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, pumping to work spot, lifting of material with mechanical equipment like winch, etc., all other incidental and operational charges, all labour charges etc., and including all other taxes except GST and seigniorage charges on all materials etc., complete as directed by Engineer-in-Charge, but excluding cost of steel and its fabrication charges etc., for the following finished items of work. Rate for Concrete per 1 Cum, including cost of Centering, Shuttering and excluding Steel Reinforcement. Upto Plint Level: Foundation Raft/Footings

48

12014

576712.8

... More
WSS KMTP;Plain Cement Concrete (1:4:8) prop.using 40mm nominal size well graded hard broken granite metal from approved quarry, Fine aggregate (50% River Sand, 50% Rock sand) including cost and conveyance of all material to work site, all labour charges for machine mixing of concrete, laying concrete, compacting by vibration including curing, finishing top surface to required levels neatly and, including all other taxes except GST and seigniorage charges on all amaterials etc., complete as derected by Engineer-in-charge for finished item of work in foundations.

18

5067

91221.3

... More
WSS KMTP;Providing & Manufacture Rock Sand filling below Raft foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts. in all conditions including hire & operational charges of machinery, labour charges etc including all other taxes except GST etc., complete for finished item of work

18

1190

21430.8

... More
WSS KMTP;Construction of 50 KLD Sewage Collection Tanks Earth work excavation by Mechanical means for Sump foundations and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).

435

128

55788.75

... More
WSS KMTP;Construction 200 KLD Over Head Tank Construction of ELSR for OHSRs/ELSRs with a staging of 12 m for Zone-II Seismic and excluding Seigniorage charges. 1) For intermediate ranges proportional rates may be adopted. All VRCC minimum of M30 grade design mix.2)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with Raft Foundation and a rate of Rs.5600/- per tonne for Cement and Rs.77000/- per tonne for Steel.3) For every metre of staging less than 12 m, the rate shall be reduced by Rs.0.05 paise per litre per every metre of difference in staging. 4) For every metre of staging above 12 m , the rate shall be increase by Rs.0.10 paise per litre per every metre of additional in staging. 5)The above rates shall be increased / decreased due to increase / decrease in the cost of Cement by Basic Rate x (Rc-5600)/5600 x 0.069 Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate 6)The above rates shall be increased / decreased due to increase / decrease in the cost of Steel by Basic Rate x (Rs-77000)/77000 x 0.135 Rs = Rate of Steel (Rs per MT) (Fe-500/500D/550D from Primary Producers)at the time of preparation of estimate. The above formula applicable only for preparation of estimate. The price adjustment shall be adopted on the actual consumption of Steel and Cement. including verticals, lightening arrester, nameboard, plastering, painting and etc., including all labour charges, three coats of food grade epoxy paint to inner surface of the reservoir inuding roof dome, including 2 coats of weather proof emulsion painting for external surfaces over one coat of primer of approved make, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, wind pressures upto 250 kg/ sq m. For decrease in wind pressure the rate has to be decreased by 2.5% per every 50 kg/sqm. If the ELSR/ OHSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs. For Tribal/ Agency area, the above rates shall be increased by 5%. If the ELSR is to be designed for seismic forces a) The aboverates are applied upto Zone-II earth quake. b) for Zone-III earth quake the above rates are to be increased by 15%. Fixtures include: a) RCC or Aluminium ladder inside 0.60 m wide. staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20m. S.S railing to stair case upto 1.2m height.

200000

23

4640000

... More
WSS KMTP;65 mm dia

2

2274

4549.2

... More
WSS KMTP;100 mm dia

2

3520

7040

... More
WSS KMTP;Inlet 150/160mm dia & Outlets

2

5312

10625.8

... More
WSS KMTP;Providing and fixing in RCC tank MS or GI insert with flanged / threaded ends 750mm long including puddle flange, required no. of companion flanges, bolts, nuts, rubber gaskets, a thick coat of non-setting mastic or plastic cement etc., including all other taxes except GST etc., all complete for finished item of work, as directed by Engineer-in-Charge. The contractor is responsible for leak proof puddle pipes inserted in the tank. (For UG Sump RCC walls) Inlet 250mm dia

2

10782

21565

... More
WSS KMTP;Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 30 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit, all other taxes except GST as directed by Engineer-in-Charge etc., complete for finished item of work. (SS No. 1201, 1212 & 1207).

15

215

3225

... More
WSS KMTP;Supply , manufacture, making to specified design including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position, all incidental, operational, labour charges all taxes except GST etc., complete for finished item of work

290.6

130

37778

... More
WSS KMTP;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108, including cost and conveyance of all materials, labour charges for welding including welding eletrodes, transportation, erection at site complete for finished item of work.

9.5

5220

49590

... More
WSS KMTP;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections for two or more openable shutters 75 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding.The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and accessories for casement window ? friction hinges of stainless steel grade 304/430- 2 Nos., per sash, handle with zamak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

10

8550

85500

... More
WSS KMTP;Supplying and fixing of SFRC manhole covers size of 24"x24" HD 20 with frames as the given locations of site, Manufacture as per BIS:12592 (Part 1&2) with ISI marking anywhere in T.G., F.O.R. destination including, loading, unloading & fixing the same complete all, finished item of work.

3

2850

8550

... More
WSS KMTP;Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

36

225

8100

... More
WSS KMTP;Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse M-Sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

6

110

661.5

... More
WSS KMTP;Re filling foundation/ basement with useful excavated soils (other than black cotton soils and other expansive soils) with initial lead and lifts spreading in layers not exceeding 150mm thick, consolidating each deposited layer by watering and ramming, compacting by earth mover to achieve optimum moiture content including cost and conveyance of water to work site and all operational, incidental, all labour charges, hire charges of T&P etc., and all other taxes except GST as directed by Engineer-in-charge etc., complete for finished item of work (APSS No. 309 & 310)

50

40

2025

... More
WSS KMTP;Supply & application of PRAH Catalyst Integral Crystaline water proofing treatment to the entire quantity of the concrete of footings, raft & walls by using Penetron Admix having speed of penetration of 31 Cm in 56 days and resistance to 20 bar hydrostatic water head, using Penetron admix @ 0.8 % by weight of 350kg cement content per CuM. The material must qualify as PRAH grade (Permeability Reducing Admixture for Hydrostatic conditions) and meet the following requirements Specified in ACI-212-3R-2010 at the recommended dosage rate of 0.8% by weight of cement content which is Capable of reducing Permeability of concrete by more than 90%, compared with control concrete, when tested as per DIN 1048 part 5 (after applying 4 cycles of hydrostatic pressure) and permeability co-efficient calculated as per Valenta / Darcy?s formula & U ?sign approved as per DIN V 18998 with chloride content less than 0.1%, alkali content less than 9.3% and no negative effect on corrosion of steel reinforcement. Work shall be carried out with all necessary post construction treatement including construction joints in base slab & walls of water retaining structures with Catalyst Crystaline repair mortar at all the construction joints & the junctions of raft slab with the retaining walls etc. after cleaning the surface mechanical means before starting application. The material must capable of withstanding Hydrostatic pressure of 16 bar continuous exposure for 7 days by using Catalyst Crysaline Penecrete Mortar & finishing coat with Penetron on all construction jonts as per approved detail specification of waterproofing by the manufacturer & should submit all the test reports to support above said technical parameters. Work shall be guaranteed for 10 years against any leakages and guarantee shall be provided on Rs.100/- stamp paper in approved proforma. Make:- Penetron India Using Penetron Admix | Penetron |Penecrete Mortar as required(Protection is not required for any UGC) Raft, Slab & Walls

119.05

2510

298815.5

... More
WSS KMTP;Painting to new walls with two or more coats of Water proof cement paint of approved make, shade and colour to give uniform shade to all plastered surfaces of walls over a base coat of approved cement, primary grade making 3 coats of white cement (total 3 or more coats) in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powedered materials including cost and conveyance of all materials to work site, all other taxes except GST and all labour charges such as preparation of the wall surface, applying priming coat, applying water proof cement paint two or more coats, scaffolding as directed by Engineer-in-Charge etc., complete for finished item of work as per SS 912.

340.95

250

85237.5

... More
WSS KMTP;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, including all other taxes except GST, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary etc., complete for finished item of work for Ground floor (GLSR)

375

600

225000

... More
WSS KMTP;Plastering 12mm thick for External Walls of concrete /brick wall surfaces in two coats with a base coat of 8 mm thick in CM (1:4) and 4 mm thick top coat in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all labour charges, all operational and incidental charges, mixing mortar, finishing, scaffolding, curing, providing architectural groves at junction of Concrete, etc., all other taxes except GST and seigniorage charges on all material as directed by Engineer-in-Charge etc., complete for finished item of work. for Ground floor (GLSR)

273

580

158340

... More
WSS KMTP;Providing Ornamental Plastering to ceiling 12mm thick in two coats with a base coat of 9mm thick in CM (1:4) and top coat of 3mm thick in CM (1:3) prop. using fine sand including neat finishing, cost and conveyance of all materials like cement, sand, water, etc., to site, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting of grooves wherever necessary and all other taxes except GST and seigniorage charges on all materials as directed by Engineer-in-Charge etc., complete for finished item of work for Over Head Tank at 10.15 mt level. for Ground floor (GLSR)

160

600

96000

... More
WSS KMTP;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 50 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work. (APSS No. 501 & 504). for Ground floor work (Pump Room)

30

8004

240135.03

... More
WSS KMTP;Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like AF Star TMT/MS Life TMT, Radha TMT, Sugna TMT etc of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)

17.96

76097

1366710.2

... More
WSS KMTP;SLABS - above 150 mm - Up to 300 mm thick

12

2163

25957.8

... More
WSS KMTP;Tie beam / Roof beams

6

16940

101640

... More
WSS KMTP;Above Plinth Level: Columns Abovet plinth level

4

15170

60680

... More
WSS KMTP;SLABS - above 150 mm - Up to 300 mm thick

20

2163

43263

... More
WSS KMTP;Tie beam / Roof beams

3

15703

47109.3

... More
WSS KMTP;Walls upto 3.66 mt level

48

17246

827843.83

... More
WSS KMTP;Columns up to plinth level

2.05

15170

31098.5

... More
WSS KMTP;Providing and laying of Vibrated Reinforced Cement Concrete corresponding to M-30 grade Design Mix Concrete corresponding to IS 456 using weigh batcher with 20mm size well graded machine crushed hard granite chips (Coarse aggregate) from approved quarry with a minimum cement content of 380 kg/CuM including cost and conveyance of all materials like cement, Coarse aggregate, Fine aggregate, water etc., to site, including centering & shuttering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centring plates etc., weigh batcher, machine mixing, laying concrete, vibrating, finishing smooth to required levels, curing, pumping to work spot, lifting of material with mechanical equipment like winch, etc., all other incidental and operational charges, all labour charges etc., and including all other taxes except GST and seigniorage charges on all materials etc., complete as directed by Engineer-in-Charge, but excluding cost of steel and its fabrication charges etc., for the following finished items of work. Rate for Concrete per 1 Cum, including cost of Centering, Shuttering and excluding Steel Reinforcement. Upto Plint Level: Foundation Raft/Footings

44

12014

528653.4

... More
WSS KMTP;Plain Cement Concrete (1:4:8) prop.using 40mm nominal size well graded hard broken granite metal from approved quarry, Fine aggregate (50% River Sand, 50% Rock sand) including cost and conveyance of all material to work site, all labour charges for machine mixing of concrete, laying concrete, compacting by vibration including curing, finishing top surface to required levels neatly and, including all other taxes except GST and seigniorage charges on all amaterials etc., complete as derected by Engineer-in-charge for finished item of work in foundations.

16

5067

81085.6

... More
WSS KMTP;Providing & Manufacture Rock Sand filling below Raft foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts. in all conditions including hire & operational charges of machinery, labour charges etc including all other taxes except GST etc., complete for finished item of work

15

1190

17859

... More
WSS KMTP;Construction of 300 KLD UG sump and Pump Room Earth work excavation by Mechanical means for Sump foundations and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinery, labour charges for setting out, construction of shoring and bracing, removal of stumps and all other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc including all other taxes except GST etc., complete for finished item of work as per SS 20 B (APSS 308).

560

128

71820



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.