Telangana State Education Women And Infrastructure Development Corporation Tender

Building work;Providing White washing four coats with white/ colour of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials.

Building work;Plastering with lime mortar 1:1.5 prop of thickness 3 to 5 mm and finishing with 3mm thick with cehbara at plastered surface including cost and convayence of all materials and labour charges, complete.

Building work;PARAPET AND CEILING:--Plastering with Lime mortar (1:1.5) prop. of thickness 60mm By dismantling the loose plaster where ever required including preparation of mortar by traditional methods (by pressure mixing in chakki) Lime Mortar (1 Lime : 2Fine Sand ) - 26 mmc1st coat and a 2nd coat of 20mm and14mm 3rd coat. The work is to be done with all leads and lifts, each coat to be done after 3 days of previous coat. Surfaces to be plastered shall be thoroughly cleaned of all dust, grease, oil and loose mortar. The entire surface shall then be thoroughly washed with nylon brush and clean water. All surfaces to be plastered shall be thoroughly wetted for 24 hours before commencing plaster and shall be kept damp during the progress of work. At the same time the wall should not be too wet, as plaster is then likely to fall out . It is essential to maintain uniform suction of water by receiving surfaces, which shall be ensured by damping evenly all dry patches before applying plaster. The Engineer-in-charge/ conservation architect will inspect & approve all preparatory work before the commencement of plastering work. Curing to be done for 21 days with help of water spray pump etc complete as per direction of Engineer incharge.