Telangana State Education Women And Infrastructure Development Corporation Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 1,42,00,000Document Cost
Refer DocumentsTender Fee
₹ 1,00,000
Summary
Construction Of Buildings For Young India Integrated Residential School (yiirs) Complex
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
587518Tender No
eNIT No: TGEWIDC/SE(projects)/NIT 5/2024-25, DT:04.04.2025Tender Authority
Telangana State Education Women And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://https://www.roadbuild.telangana.gov.in/home.do
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Building Work;Supply, transportation & Fixing of of 40 - 45 W decorative LED post top lantern with die cast aluminium spigot, spun alluminium powder coated top cover, alluminium pressure die cast heat sink, opel PC diffuser and clear acrylic etc suitable for pole mounting complete with all accessories. LUMINAIRE MAKE : K Lite / Jaquar / HAVELLS / Crompton LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
40
13747
549880
... More
Building Work;Fabrication, Transportation and supply of MS tubular pole of length 3 Mtrs height made out of MS pipes having dia 114.3 mm, thickness 3.6 mm , 1 Mtr bottom section with provision for connector and MCB, in built junction box, top section made up of pipe having dia 60 mm, thickness 3.2 mm , 2 Mtr suitable to mount post top lantern duly galvanised including base plate, foundation boits, nuts and bolts, including the supply of suitable boards with Bakelite sheet and MCB's as per IS specification along with template. Makes: Bajaj / Valmont / TRANSRAIL or equivalent any approved brand
40
9000
360000
... More
Building Work;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 25Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
6
341
2046
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 16 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
320
40
12800
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
45
900
... More
Building Work;Labour charges for run of U.G cable on wall / existing pipe/tray with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for the cables.
500
69
34500
... More
Building Work;Earth work excavation of Trench in hard ground soil of 0.2 width x 0.3 mts depth and laying of HDPE Duct /GI pipe and drawing U.G cables and back filling of Trench including cost and conveyance of materials and labour charges etc., complete
2000
41
83400
... More
Building Work;Supply and laying of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab .
2200
318
699600
... More
Building Work;Supply and laying of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab .
300
409
122700
... More
Building Work;Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 16205 Part- 24 : 2017 with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: Bajaj / CPE
2000
119
238000
... More
Building Work;Supply, transportation & Fixing of 90W +/- 10% (>/ 9000 lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / HAVELLS / Crompton LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
100
7750
775000
... More
Building Work;Supply and fixing of Automatic Street Light Control System based on daywise users settable mode of astronomical timer or digital timer with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 380 - 480V AC, 50 HZ and shall withstand surge level of 8 KV. The electronic controller with IP 65 protection and suitable SMC / PC enclousure with IP 54 protection, MCBs of Legrand / Schneider / LK / Siemens / BCH of 10kA C curve and Contactor suitable to control the load 8 KW Three phase load with necessary ardware, Allen key set and clamping arrangements. Makes :Nature Switch / Light Mate.
4
17042
68168
... More
Building Work;Supply and fixing of suitable out door feeder piller box of size 3' x 2' x 1' made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole isolator as incomer, 6 Nos 6-32A SP MCBs as out goings. indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following (for street light control)
4
28194
112776
... More
Building Work;Supply and run of 1.5 Sqmm 3 core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells
800
97
77600
... More
Building Work;Foundation and erection charges with special T&P, for 3.0 Mtrs long MS tubular pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x0.45 Mtrs x 0.80 Mtr size M20 cc work vibrated concreting mixing with necessary steel (6.5kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials etc. complete.
30
5000
150000
... More
Building Work;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x0.45 Mtrs x 1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials etc. complete.
80
7499
599920
... More
Building Work;Fabrication, Transportation and supply of of 1.5mtrs sword type decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 50mm dia Pipe. Makes: Bajaj / Valmont / TRANSRAIL.
20
6703
134060
... More
Building Work;Fabrication, Transportation and supply of of 1.5mtrs sword type decorative Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe. Makes: Bajaj / Valmont / TRANSRAIL.
60
5135
308100
... More
Building Work;Street Lights:Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with Bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: Bajaj / Valmont / TRANSRAIL.
80
15031
1202480
... More
Building Work;First Aid box 18" x 12" x 8" containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required.
2
1718
3436
... More
Building Work;Providing & Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook.
4
391
1564
... More
Building Work;Providing floor mounting stand for keeping 4No of fire bucket 1500mm length, 900mm height made out of 40x40x6mm angle iron welded with 4 hooks and duly painted with one coat of red lead and two coats of enamel paint.
1
1593
1593
... More
Building Work;Providing & Fixing of Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982.
5
325
1625
... More
Building Work;Providing & Fixing of Shock instrution chart in English / Hindi / Telugu duly framed with front glass.
1
654
654
... More
Building Work;Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 having 2.5mm thickness upto 11KV.
10
5643
56430
... More
Building Work;Supply of Rubber hand gloves suitable for 11 KV.
2
1136
2272
... More
Building Work;Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.
500
151
75500
... More
Building Work;Supply, Transportation and Installation of 300mm x 50mm x 2mm hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. Makes: DEC / MNR / Aparna / H FAB or equivalent
100
1227
122700
... More
Building Work;Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1 mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.
1
99811
99811
... More
Building Work;Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 70-95 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs only. Makes : Transeal / Raychem / M Seal
6
15974
95844
... More
Building Work;Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 70-95 Sqmm with necessary materials etc., complete. Makes : Transeal / Raychem / M Seal
6
10521
63126
... More
Building Work;HT Cable and Accessories: Supply of 3 Core 11 KV 95 Sqmm HT XLPE (E) armoured Cable. As per IS specification confirming to IS 7098/II/85 with latest ammendments. Makes: Torrent / Unicab / Universal / Polycab / Havells / KEI / RPG / Gloster
200
1806
361200
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
45
1800
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
62
2480
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
80
1600
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 120 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
102
4080
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 150 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
159
6360
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 185 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
182
7280
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 240 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
227
9080
... More
Building Work;Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 300 sqmm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
40
307
12280
... More
Building Work;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 25Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
12
407
4884
... More
Building Work;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 50Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
407
8140
... More
Building Work;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 185Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
1187
23740
... More
Building Work;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 240Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
1323
26460
... More
Building Work;LT CABLE TERMINATIONS: Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 3.5 300Sqmm XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete. Makes: SMI / Commet / Dowels or equivalent approved by Chief Engineer /R&B/ Electrical.
20
1638
32760
... More
Building Work;Labour charges for run of U.G cable on wall / existing pipe/tray with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for the cables.
50
76
3800
... More
Building Work;Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 50 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
750
355
266250
... More
Building Work;Earth work excavation of Trench in hard ground soil, laying of U.G cables 70 to 300Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
2500
370
925000
... More
Building Work;Supply and laying of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab .
250
409
102250
... More
Building Work;Supply and laying of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab.
500
648
324000
... More
Building Work;Supply and laying of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab.
500
1841
920500
... More
Building Work;Supply and laying of 240 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab.
1000
2340
2340000
... More
Building Work;U.G CABLES: Supply and laying of 300 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Unicab / Universal / Polycab.
1000
2852
2852000
... More
Building Work;Feeder piller -7 ; Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 50 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for Panel shall be manufacture only from CPRI approval Fabricators. 400A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMING Supply of 250A, 4pole MCCB Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35KA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ - 2Nos Supply of 4A 10KA TP MCB, C/D Curve ISI Mark 2 Nos Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of 0-800A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. -1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LT current transformer with bar primary 800A / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Out Going feeders: Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted. - 5 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 100 A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Labour charges etc complete with connections for Finished item of work.
1
198825
198825
... More
Building Work;Feeder piller -5 Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 30 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports spider links / bus bar links and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.) 250A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted - 2 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 40 A 10KA TP MCB, C/D Curve ISI Mark 2 Nos OUT GOING FEEDERS Supply of 32A 10KA DP MCB, C/D Curve ISI Mark -5 Nos Makes : Legrand-DX3 / Schneider-Acti9 Supply of 40A 10KA DP MCB, C/D Curve ISI Mark -16 Nos Makes : Legrand-DX3 / Schneider-Acti9 Metering : Supply and fixing of single phase Electronic energy Meter, 240V AC, 50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Makes : CONZERVE /ELMEASURE / MECO / HPL / HAVELLS.- 20 Nos Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Labour charges etc complete with connections for Finished item of work.
1
192969
192969
... More
Building Work;Feeder piller 3,4 ; Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 30 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports spider links / bus bar links and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.) 250A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted - 2 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 40 A 10KA TP MCB, C/D Curve ISI Mark 2 Nos OUT GOING FEEDERS Supply of 32A 10KA DP MCB, C/D Curve ISI Mark -21 Nos Makes : Legrand-DX3 / Schneider-Acti9 Metering : Supply and fixing of single phase Electronic energy Meter, 240V AC, 50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board.Makes : CONZERVE /ELMEASURE / MECO / HPL / HAVELLS.- 20 Nos Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Labour charges etc complete with connections for Finished item of work.
1
178702
178702
... More
Building Work;Feeder piller -2 Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 30 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports spider links / bus bar links and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.) 250A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 2 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 40 A 10KA TP MCB, C/D Curve ISI Mark 2 Nos OUT GOING FEEDERS Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 11 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Metering : Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : LK / C&S / SALZAR /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Supply and erection of LT current transformer with bar primary 250 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Labour charges etc complete with connections for Finished item of work.
1
270160
270160
... More
Building Work;Feeder piller -1 ; Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 30 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports spider links / bus bar links and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.) 400A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 400A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. - 1 No Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. - 1 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 40 A 10KA TP MCB, C/D Curve ISI Mark 2 Nos OUT GOING FEEDERS Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. - 11 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Metering : Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK/ SEIMENS. Supply and erection of 0-250 A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No Makes : LK/ C&S / SALZAR /Siemens. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No Makes : LK/ C&S / SALZAR /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : LK / C&S / SALZAR /Siemens. Supply and erection of LT current transformer with bar primary 400 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Labour charges etc complete with connections for Finished item of work.
1
282837
282837
... More
Building Work;APFCR Panels(100 KVAR) ; Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted 100 KVAR APFC panel made out of No.16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable spider links/bus bar links rating TPN Alluminium busbar ( with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below. This shall be got be manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges. 250A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMER Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted - 1 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 4A 10KA TP MCB, C/D Curve ISI Mark 1 No Metering Set: Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS / . Supply and erection of 0-250A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No MAKES : LK / C&S / SALZAR / /Siemens. Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete.- 2Nos MAKES : LK / C&S / SALZAR /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3Nos MAKES : LK / C&S / SALZAR /Siemens. Supply and erection of LT current transformer with bar primary 400 / 5A ratio in the existing panel including connections etc., complete. - 3Nos MAKE :KAPPA or Equivalent 32A Bakelite fuse units with HRC fuse links (A.R.) - 3Nos Supply and fixing of 12 Stage APFC Relay with connections suitable CTs sensing from main bus bar of main panel. - 1No Makes : LK/ Siemens / EPCOS / Schneider / Elmeasure OUT GOING Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 8Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3/LK Supply and fixing of 25 KVAR rating capacitor duty contactor - 2Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 10 KVAR rating capacitor duty contactor - 5Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Labour charges etc complete with connections for finished item of work. Supply and fixing of 25 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 2Nos Supply and fixing of 10 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 4 Nos Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 5 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1 No Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 3 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1 No Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Supply and fixing of 2 KVAR MPP type heavy duty capacitor of not less than 480V of cylindrical type - 1 No Makes:LK (L&T)/ Siemens/Schneider/ Epcos. Control wiring,Labour charges for errection of switch gears,panels boards including all labour charges etc with connections for finished items of works including transportation charge.
1
304130
304130
... More
Building Work;Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 50 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for Panel shall be manufacture only from CPRI approval Fabricators. 400A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMING Supply of 250A, 4pole MCCB Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35KA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ - 2Nos Supply of 40 A 10KA TP MCB, C/D Curve ISI Mark 2 Nos Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of 0-800A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. -1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LT current transformer with bar primary 800A / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Out Going feeders: Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted. - 2 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 100 A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 4 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Labour charges etc complete with connections for Finished item of work.
1
198825
198825
... More
Building Work;Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet comprising of TPN bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers.The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process. The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement, foundation bolts, suitable G.I earth strip 50 x 6mm, door loop earthings, bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on flooring and consisting of the following as required and as per IS standards for Panel shall be manufacture only from CPRI approval Fabricators. 800A Alluminium Bus Bar with colour coded sleeves.(1.2A/Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat INCOMING & BUS coupler Supply of 630A, 4pole MCCB Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 50KA with thermal magnetic release Panel Mounted. Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ - 3 Nos Supply of 4A 10KA TP MCB, C/D Curve ISI Mark 4 Nos Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete.- 1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of 0-800A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. -1 Nos MAKES : CONZERVE / ELMEASURE / LK / SEIMENS. Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LED indication lamps on the existing panel board. - 3 Nos Makes : LK / C&S / SALZAR / /Siemens. Supply and erection of LT current transformer with bar primary 800A / 5A ratio in the existing panel including connections etc., complete. - 3 Nos MAKE : KAPPA or Equivalent Out Going feeders: Supply of 400A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted. - 7 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 250A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted. - 4 Nos MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 100 A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted. - 1 No MCCB Make: Schneider-NS NSX/Legrand-DP X3. Supply of 32A 10KA DP MCB, C/D Curve ISI Mark 2 Nos Supply of 40A 10KA TP MCB, C/D Curve ISI Mark 3 Nos Labour charges etc complete with connections for Finished item of work.
1
815220
815220
... More
Building Work;MAIN POWER PANEL ESS ; Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted out door KIOSK of double door type made out of No.14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) . The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materialswith angle iron stand etc & labour charges. Supply of 6A 10KA FP MCB, C/D Curve ISI Mark-1 No Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora. Supply of 630A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted.Makes : L&T / Schneider / Siemens 1No Erection of Panel board with C.C bed on suitable angle iron base frame etc., complete."
1
91320
91320
... More
Building Work;Supply and run of No. 8SWG GI wire including cost of all accessories and labour charges etc complete.
500
27
13500
... More
Building Work;Supply and run of 25mmX6mm copper strip including cost of all accessories and labour charges etc complete.
100
1778
177800
... More
Building Work;Supply and run of 50mmX6mm GI strip including cost of all accessories and labour charges etc complete.
100
320
32000
... More
Building Work;Supply and run of 25mmX6mm GI strip including cost of all accessories and labour charges etc complete.
300
175
52500
... More
Building Work;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode GI strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 40mm x 6mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing CC chamber/brick massonry chamber 50mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
30
18940
568200
... More
Building Work;EARTHINGS ; Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
40
6635
265400
... More
Building Work;250 KVA GENERATOR SET ; Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 250 KVA out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMFcontrol panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned. A. Alternator : Kirloskar / Stamford / CromptonGreaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, selfregulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give - - - - -KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size as per the standards.02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standards. C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following.01. Voltmeter with selector switch.02. 4 Pole MCCB incomer of 630A rating of Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make.11. Main supply air break contactor of LK make. 12. Audio Visual announciation .13. Main supply voltage set of control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core.15.630A incomer change over switch
1
3211726
3211726
... More
Building Work;EXTERNAL ELECTRIFICATION 315 KVA Transformer : Supply, Transportation, Installation, Testing and Commissioning of 315 KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level-I or as per prevailing standards with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: PETE / Esennar / Crompton Greaves / ABB /Kirloskar or equvivalent as approved by the department 1. Quantity : 1 2. Rated KVA : 315 KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling :ONAN 8. Temp Rise : 40°C in oil, 45°C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : 11KV/26A 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) or More 21. Terminal arrangement. a.HV: HT terminal box as per the siteCondition. b. LV: Cable box suitable to receive 300 Sq.mm XLPE cable 22. LV:One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] as per IS 24. Total Losses at 100% Loading [Watts] [Max] as per IS 25.Percentage Impedance at 75 deg. C at 5 as per IS (As per Design ) 26. No Load current: Less than 2% of full load current. 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable):Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type)
1
1486243
1486243
... More
Building Work;Supply and erection of Hydro Pneumatic System with Variable Speed Drive,Common inlet and outlet manifolds,Non returns valvesand isolating valves for each pump on the outlet sie,pressure switches and one pressure transmitter connected to the outlet manifold,an outlet pressure gauge on the outlet manifold,pressure tanks,a control panel,control MPC to electrically switch on/off the pumps,Display&controller,all necessary interconnections for the above items,This entire system should have compatibility to integrate with BMS/IBMS system. Each pump capacity: 7.5m3/hr pump model:Hydro MPC F 3xCR5-8,(2w+1s),(1.1 kw each pump/1.5hp),inlet&outlet:DN 50.. Make: Grundfos
2
850000
1700000
... More
Building Work;Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683
26
5567
144742
... More
Building Work;Supply, Transportation, installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 450 lpm at 35 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens / ABB / Kirloskar
13
67616
879008
... More
Building Work;Supply, installation, testing and commissioning of 25 mm dia brass / gun metal chrome finished ball valve including cost of all materials, labour charges with required machinary etc., complete. of following sizes as required. Make: Newage / Winco / Padmini / Safex.
39
1727
67353
... More
Building Work;Supply, testing and commissioning of 100 mm butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar
13
6395
83135
... More
Building Work;Supply, Transportation, laying, testing & commissioning of 100 mm dia 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes
460
2593
1192780
... More
Building Work;Supply and fixing First - Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Newtech / Safex. c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
40
9191
367640
... More
Building Work;Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000 watts 5 Star rated water heater with ABS plastic body of 25 Litres capacity to withstand up to 8.0 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete. Makes : Crompton / Jaquar / Venus / Racold / AO Smith / Havells / Bajaj or equivalent as approved by the Dept.
77
14469
1114113
... More
Building Work;Supply, Installation, Testing and Commissioning of 60 Ltrs per hour cooling capacity, 120 Ltrs storage capacity self contained drinking water cooler as per IS : 1475 with hermetically sealed compressor, non CFC refrigerant suitable for operation on 230 V , 1 phase, 50 Hz AC supply, Fully stainless steel (SS 304) body (0.8 mm thick) and tank (0.5 mm thick), stainless steel water tray, minimum 2 numbers SS / Brass chrome plated faucetes and suitable drainage system complete in all respects including comprehensive maintenance of units during the defect liability period. Makes : Bluestar / Voltas
13
75030
975390
... More
Building Work;Supply and installation of 100 KVA Servo Controlled Air Cooled Voltage Stabilizer with input voltage range 340 - 480 V 3 phase, output voltage 380 / 400 / 415 Volts + / 1%, 3 phase, frequency 50 Hz +/ 6%, unbalancing load, Corrected speed 60 Volts / Sec, Efficiency 97 %, Ambience temperature 45 °C, AC Motor, Continuous duty cycle, Output waveform True production of Input, Indication lamps Mains ON , Output ON, Low Cut Off, High Cut oFF, dIgital display to read ll electrical parameters, equipped with soft touch buttons for use of operation, with High and Low Voltage Protection, Single Phase Preventor, Short Circuit Protection, Single Phase Prevention and phase reversal protection etc., complete. Makes : Fuji Electric / Power Inn / Krykard
1
255634
255634
... More
Building Work;Supply, installation, testing and commissioning of 75" interactive display panel Makes : Peoplelink / Dahua / Samsung / LG
75
95000
7125000
... More
Building Work;Supply and providing of UPS cum battery rack 11 to 20 batteries
10
5749
57490
... More
Building Work;Supply and fixing of 12 V 65 AH SMF battery including wire leads. Makes : Quanta / Racket / Exide / Amaron.
150
10061
1509150
... More
Building Work;Supply, Transportation and installation of 20 KVA, 360 V on line UPS system IGBT based rectifier with input power factor correction with isolation transformers double conversion, SNMP controls, LCD display, Pure sine wave out put, with auto static switch three phase input / three phase output with warranty up to three years. Makes: APC / Numeric / Emerson / Eton
5
312441
1562205
... More
Building Work;Supply, Installation, Testing and commissioning of 12" school bell high volume gong bell et., complete with connection Makes : Edison or equivalent
1
3000
3000
... More
Building Work;Supply, installation, testing and commissioning of the 25 mm drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Finolex / Astral / Ashirvad / Supreme or equivalent approved by the department
220
329
72380
... More
Building Work;Providing 2 Runs of copper tubes for suction and liquid between indoor and out door unit for split air conditioners including foaming required wire etc complete with connections. 1.7/8" x 1/2"
239
1784
426376
... More
Building Work;AIR-CONDITIONERS SYSTEM : Supply and Transportation and Installation of 2.0 / 1.8 TR 3 Star capable of delivering 21600BTU/hr and above with operating on refrigerant R-32 / R-410 of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 corecopper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years Makes : Daikin / Blue Star / Hitachi or equivalent
26
54263
1410838
... More
Building Work;Supply and laying of 6 sq mm 4 core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells
1050
454
476700
... More
Building Work;Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.
2250
142
319500
... More
Building Work;Supply, Transportation and Installation of 300mm x 50mm x 2mm hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work.
1350
1227
1656450
... More
Building Work;Supply and installation of 600 mm width x 500 mm depth UL certified 9U wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry, confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK 08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc., complete. Makes : Vallrack (Legrand) / Netrack.
2
11055
22110
... More
Building Work;Supply and installation of 600 mm width x 500 mm depth UL certified 15U wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry, confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK 08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc., complete. Makes : Vallrack (Legrand) / Netrack.
6
12577
75462
... More
Building Work;Supply and fixing of 24 port patch panels IO separate including accessories and all labour charges etc complete. Makes : Digisol / D link. / Legrand.
8
7578
60624
... More
Building Work;Supply of24 Port, 4 GIGA fibre slots (SFP), 250 W, 10 / 100 / 1000 Gigabit PoE switch with GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link. Makes : D link / Netfox.
8
28404
227232
... More
Building Work;Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete Makes : Digisol / D link. / Legrand
120
199
23880
... More
Building Work;Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : Digisol / D link. / Legrand
120
222
26640
... More
Building Work;Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes:Legrand Lyncus / GM Four Five/ Goldmedal Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision
2
340
680
... More
Building Work;Supply and run of 2 Pair, 0.5mm telephone copper wire in existing pipe inlcuding all labour charges etc., complete. Makes : Finolex / Delton / Surabi / Polycab
200
25
5000
... More
Building Work;Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate and all labour charges etc., complete. Makes: D Link / Legrand / Krone.
120
693
83160
... More
Building Work;Supply and Run of LAN Cable cat - 6 UTP cable.in existing pipe inlcuding all labour charges etc., complete. Makes : Digisol / TP Link / D link. / Legrand
3500
45
157500
... More
Building Work;Supply and fixing of modular co axial socket type TV antenna outlet on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.
140
397
55580
... More
Building Work;Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curve SP MCB including internal connection and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider . MCB Makes : Legrand-DX3 / Schneider-Acti9.
85
2734
232390
... More
Building Work;Supply and fixing of 8 way VTPN DB IP 43 Protection as per IS:13032 With and suitable for 1 No 125A 4 pole MCCB Incomer and 8 Nos 63A 10KA TP MCB, ISI Marked C/D CURVE with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter Connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider . MCB Makes : Legrand-DX3 / Schneider-Acti9. MCCB Makes: LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3.
6
62074
372444
... More
Building Work;Supply and fixing 8 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 40A FP Isolator and 24 Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider . MCB/ Isolator Makes : Legrand-DX3 / Schneider-Acti9.
17
20760
352920
... More
Building Work;Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 40A FP Isolator and 12 Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider . MCB/ Isolator Makes : Legrand-DX3 / Schneider-Acti9.
18
12966
233388
... More
Building Work;Supply and fixing of 12 Way SPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 40A DP Isolator and 12 Nos 6-32 A 10kA ISI Marked C/D curve SP MCBs With 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider. MCB/ Isolator Makes : Legrand-DX3 / Schneider-Acti9.
80
9589
767120
... More
Building Work;Supply, Transportation and Fixing of light duty 10" (250mm) RPM BLDC exhaust fan necessary accessories etc., complete. Makes : Atomberg / Crompton / Havells / Orient. Twin Core Wire Makes: Finolex / RR kabel / Havells.
144
3367
484848
... More
Building Work;Supply, Transportation and Fixing of light duty 8" (200mm) RPM BLDC exhaust fan necessary accessories etc., complete. Makes : Atomberg / Crompton / Havells / Orient. Twin Core Wire Makes: Finolex / RR kabel / Havells.
270
3137
846990
... More
Building Work;Supply and fixing of Two modular Stepped electronic regulator with connections and Labour charges etc complete. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
2218
637
1412866
... More
Building Work;Supply, Transportation and fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.with twin core flat copper wire, connections and all labour charges etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient / Crompton.
2218
3642
8077956
... More
Building Work;Supply, transportation and Fixing of 10 W, +/ 10% , >/ 1000 lumens, 600mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
64
614
39296
... More
Building Work;Supply and transportation of 12W +/- 10% (>= 1200 Lumens) LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
998
1542
1538916
... More
Building Work;Supply, transportation and Fixing of 22W, +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
2536
875
2219000
... More
Building Work;Supply and transportation of 15 W +/- 10% (>= 1500 Lumens) LED back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
934
1632
1524288
... More
Building Work;Supply and fixing of Ding Dong Bell, including giving connections, cost of all accessories and labour charges etc., complete. Makes :GM / Million / Gold Medal / Anchor /Great white.
63
209
13167
... More
Building Work;Supply and Run of 5 of 10.0 Sq.mm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains ,ferrulesinlcuding all labour charges etc., complete for Lighting VTPN DBs. Wire Makes: Makes : Finolex / RR kabel / Havells.
460
898
413080
... More
Building Work;Supply and Run of 5 of 6.0 Sq.mm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs. Wire Makes: Makes : Finolex / RR kabel / Havells.
1330
572
760760
... More
Building Work;Supply and Run of 3 of 6.0 Sq.mm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs Wire Makes: Makes : Finolex / RR kabel / Havells.
3900
336
1310400
... More
Building Work;Supply and Run of 3 of 4.00 Sq.mm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains,ferrules inlcuding all labour charges etc., complete.Wire Makes: Makes : Finolex / RR kabel / Havells.
25550
239
6106450
... More
Building Work;Supply and Run of 3 of 2.50 Sq.mm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains, ferrules inlcuding all labour charges etc., complete.Wire Makes: Makes : Finolex / RR kabel / Havells.
30780
157
4832460
... More
Building Work;Supply and fixing of 1 Nos 6 / 10A ISI mark Modular type switch with 3Nos 6 /10A 3/2 pin wall plug socket with shutter on suitable size Modular deep box with cover frame including cost and coveyance of all material ferules and all labour charges etc., complete for Computers in N.R.B. / R.B. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
293
1205
353065
... More
Building Work;Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket with shutter, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
521
786
409506
... More
Building Work;Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI marked copper cable including Supply and fixing of ISI Marked 6 / 10A- 3/2 pin Modular socket with shutter, 6 /10A 1way Modular switch with required cover frame, ferrules including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B.Wire Makes: Makes : Finolex / RR kabel / Havells. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
186
969
180234
... More
Building Work;Supply and fixing of ISI marked 6 / 10A 3/2pin Modular socket with shutter, 6 / 10 Amps Modular switch on 3 modular box with suitable cover frame on a common switch board including cost and conveyance of all material and all labour charges etc., complete in N.R.B.Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
2720
574
1561280
... More
Building Work;Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6 / 10A ISI Mark 1way Modular switch with required modular box and cover frame, ferrules in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Wire Makes: Makes : Finolex / RR kabel / Havells. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
2892
1165
3369180
... More
Building Work;Wiring with run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6 / 10A ISI Mark 2way Modular switch with required modular box and cover frame, ferrules in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B . Wire Makes: Makes : Finolex / RR kabel / Havells. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
108
1405
151794
... More
Building Work;Wiring with run of 2 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6 / 10A ISI Mark 1way Modular switch with required modular box and cover frame, ferrules in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B .Wire Makes: Makes : Finolex / RR kabel / Havells. Accessories Makes : Legrand Lyncus / GM Four Five / Panasonic Vision
4554
937
4267098
... More
Building Work;Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 regid PVC pipe consealed in wall with PVC junction boxes and all required accessories including masonary work for light, fan and separate plug point with including all labour charges etc., complete..Makes : Sudhakar / Finolex / VIP /Precision .
34850
87
3031950
... More
Building Work;Supply and Laying of ISI 25mm outer dia heavy grade with IS : 9537 part 3 regid PVC pipe concealed in Roof Slabs with all required PVC Deep Boxes including masonary work and labour charges etc., complete..Makes : Sudhakar / Finolex / VIP /Precision .
49000
102
4998000
... More
Building Work;Supply and Transportation of 1HP single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon as approved by the Dept. including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
2
29199
58398
... More
Building Work;Supply and errecting water level controller 230/ 415V AC, 2 way per over head tank operation only as approved by the Dept. including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
34
3386
115124
... More
Building Work;S&F 25 mm nominal size copper body float valve with PVC ball Indian make ISI mark approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
34
581
19754
... More
Building Work;Supplying & fixing Bronze Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Sizeas approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
15
2865
42975
... More
Building Work;Supplying & fixing Bronze Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Sizeas approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
5
1808
9040
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 80 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
8
10576
84608
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 65 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
35
7135
249725
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
45
4623
208035
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
10
3152
31520
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
10
2337
23370
... More
Building Work;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
45
1538
69210
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992)SS Type A - 3M - 160mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
852
879
748908
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992)SS Type A - 3M - 110mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
882
407
358974
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992) SS Type A - 3M - 75mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
185
219
40515
... More
Building Work;110 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
403
83
33449
... More
Building Work;4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
420
194
81480
... More
Building Work;Round Jali - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
1235
35
43225
... More
Building Work;Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
1235
306
377910
... More
Building Work;Supply & fixing Fancy PVC shelf including all fittings including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
2064
97
200208
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992)SS Type A - 3M - 160mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
65
879
57135
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992)SS Type A - 3M - 110mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
6645
407
2704515
... More
Building Work;Supply and laying of UPVC SWR Ring fit pipe (as per IS 13592 -1992) SS Type A - 3M - 75mm dia including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
5537
219
1212603
... More
Building Work;Suppy and fixing 40 mm dia 3 M Kg/sq.cm Double Socket PVC/SWR pipe - 4 including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
1968
235
462480
... More
Building Work;Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000 watts 5 Star rated water heater with ABS plastic body of 25 Ltrs capacity to withstand up to 8.0 bar of water pressure including all standard aessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete. Makes : Crompton / Jaquar / Venus / Racold /AO Smith / Havells / Bajaj or equivalent asapproved by the Dept. including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
123
14469
1779687
... More
Building Work;S&F of Chromium plated finish stainless steel body Toilet paper holder with 10 years warranty including cost and conveyance of all materials to site, all operational,incidental , labour charges, overhead & contractor's profit etc.complete for finished item of work in all floors as directed by Engineer-in-charge.
135
1120
151200
... More
Building Work;S&F Stainless steel liquid soap container wall mounted and bottle type including cost & conveyance of all materials, labour charges, overheads & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
27
602
16254
... More
Building Work;S&F CP finish brass metal body single coat hook, including cost & conveyance of all materials, labour charges, overheads & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
27
545
14715
... More
Building Work;S&F CP finish brass wall mounted towel ring, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
116
808
93728
... More
Building Work;S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
116
504
58464
... More
Building Work;S&F 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931 and Supplying & Fixing 15 mm nominal sizePVC connection with brass union nut C.P coated including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
810
462
374220
... More
Building Work;S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931 including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
206
802
165212
... More
Building Work;S&F 15 mm nominal size 152.0 mm CP finish iron body shower rose including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
520
244
126880
... More
Building Work;S&F of 15 mm CP finish brass body wall mixer conforming to IS 8931 with center distance 150 mm conforming to IS 8931 including cost and conveyance of all materials to site, all operational,incidental , labour charges, overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
520
2743
1426360
... More
Building Work;S&F of 15 mm brass body CP finish self closing tap push type conforming to IS 1711 including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
337
359
120983
... More
Building Work;Supplying & Fixing white glazed flat back half stall urinals of size 590 x 375 x 390 mm with standard C.P. Spreader fixed with screws complete Indian make 1st quality conforming to IS:2556-1995: fitted with 15 mm brass body CP finish self closing tap push type conforming to IS 1711 and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects for all floors
337
4960
1671520
... More
Building Work;Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge..
172
6351
1092372
... More
Building Work;Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block with single CP pillar cock and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, etc. complete for finished item of work in all respects.
534
5883
3141522
... More
Building Work;Supply, Installation and commissioning approved make wash down wall mounted EWC conforming to IS:2556 (Part 16)-2002 with 'P' or 'S' trap with concealed flush cistern fixed in wall with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap all of approved make including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects: White Colour
310
12981
4024110
... More
Building Work;S&F premium make 50mm CPVC - Sche-80 Ball Valve including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
107
1534
164138
... More
Building Work;S&F premium make 40mm CPVC - Sche-80 Ball Valve including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
97
973
94381
... More
Building Work;S&F premium make 32mm CPVC - Sche-80 Ball Valve including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
68
716
48688
... More
Building Work;S&F premium make 25mm CPVC - Sche-80 Ball Valve including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
92
334
30728
... More
Building Work;S&F premium make 20mm CPVC - Sche-80 Ball Valve including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
304
297
90288
... More
Building Work;S&F premium make CPVC Pipes of 54mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
1530
1546
2365380
... More
Building Work;S&F premium make CPVC Pipes of 41.30mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
1825
945
1724625
... More
Building Work;S&F premium make CPVC Pipes of 34.90mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
1290
658
848820
... More
Building Work;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
1250
434
542500
... More
Building Work;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
6935
344
2385640
... More
Building Work;S&F premium make CPVC Pipes of 15.90mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge
5338
260
1387880
... More
Building Work;Supplying and Fixing Pedestal for Wash Hand Basin including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc. complete for finished item of work.
32
1863
59616
... More
Building Work;Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, etc. complete for finished item of work in all respects.
32
3707
118624
... More
Building Work;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
178
843
150054
... More
Building Work;S&F of 15 mm brass body CP finish two way bib tap of not less than 400 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931 connected with Stainless steel flexible hose 1.0 m long for hand shower / health faucet with brass nuts and CP finish brass body health faucet gun including cost and conveyance of all materials , all operational, incidental labour charges , overheads & contractors profit etc.complete for finished item of work
668
1703
1137604
... More
Building Work;S&F of Chromium plated finish stainless steel body towel rail 24'' with 7 - 10 years warranty including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
32
2059
65888
... More
Building Work;S&F CP finish steel towel rod of 600 mm long and 20 mm dia with brackets including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
32
504
16128
... More
Building Work;Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour
32
13714
438848
... More
Building Work;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
326
6199
2020874
... More
Building Work;Constructing Brick masonry chamber over the gully trap or peet valve and fitted with 304.8 x 228.6 m size CI frame and hinged cover including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work.
40
650
26000
... More
Building Work;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work.
40
5238
209520
... More
Building Work;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50),bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth
80
16142
1291360
... More
Building Work;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50),bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth
125
9959
1244875
... More
Building Work;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)
50
851
42550
... More
Building Work;Supplying & fixing of 3" (75 mm nominal size ) Nahany Trap with Jali - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
230
139
31970
... More
Building Work;Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 part 4 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on inter locking metal T grid of hot dipped galvanized iron section of 0.33 mm thick galvanized @ 120 gms per sqm including both sides, comprising of main T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600 x 600mm suspended from ceiling using galvanized mild steel items galvanizing @ 80 grams per sqm i.e. 50mm long, 8mm outer diameter, M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2 mm. Galvanized iron permitter wall angle of size 24x24x0.40mm of length 3000mm to fixed on periphery wall/partition with help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall SS screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge
632.36
2058
1301396.88
... More
Building Work;Providing and Fiximg of Stone Polymer Composite Tile of thickness of 5 mm Core with wear layer is of 0.5mm and has an IXPE Cushion backing of 1mm, 100% Water & Termite proof, Scratch/Fire /UV Resistant, a Recyclable Green product having interlocking system with suitable skirting with a warranty of 5 years of indoor application only, low and semi traffic areas, complete for finished item of work
736.2
2329
1714609.8
... More
Building Work;Providing and laying 20mm broken metal fill, for sub soil water storage system / depression trenches, including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work
4981.39
2857
14231831.23
... More
Building Work;Providing and laying 40mm broken metal fill, for sub soil water storage system / depression trenches, including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work
2890.69
2433
7033048.77
... More
Building Work;Providing and laying 75 -100mm hard broken stones of granite, for sub soil water storage system / depression trenches, including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work
2890.69
1645
4755185.05
... More
Building Work;Providing and laying 150mm large size boulders for sub soil water storage system / depression trenches, including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work
2890.69
1256
3630706.64
... More
Building Work;Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 20 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade, cost of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water and tiles etc., overheads and contractors profit, complete for finished item of work. Ground floor
4800
927
4449600
... More
Building Work;Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem(WMM) specification including cost & conveyance of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H (5th revision) specification.406 and gradation as per table 400-13 for finished item of work. (excluding seigniorage charges)
3382.5
2226
7529445
... More
Building Work;Providing and applying tack coat with bitumen Emulsion (SS1) (Bulk) using Emulsion pressure distributor at the rate of 0.20 kgs per sqm on the prepared bituminous cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
17600
13
228800
... More
Building Work;Providing and applying tack coat with bitumen Emulsion (SS1) (Bulk) using Emulsion pressure distributor at the rate of 0.25 kgs per sqm on the prepared granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
17600
15
264000
... More
Building Work;Providing 30mm thick compacted Bituminous Concrete by hot mix plant using hard blasted granite crushed aggregates of Grading ? 2 as per table 500-17 of specification 509 of MoRT&H (5th revision), premixed with bitumen Grade VG - 30 @ 4.50% of mix and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 509 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge
528
9360
4942080
... More
Building Work;Providing and laying of 50mm thick Dense Bituminous Macadam with hot mix plant producing an average output of 37.5 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-10 of MoRT&H specificaion 505 (5th Revision) premixed with bituminous binder of VG-30 grade @ 4.5% by weight of total mixture, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all T&P and all other contingent charges necessary including cost of seigniorage charges on all materials etc., complete and as per MoRTH specification No. 5045 (5th Revision).
880
9168
8067840
... More
Building Work;Providing, laying Reinforced cement concrete Hume pipes of 1000 mm Dia., NP-3 class for pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 1000mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work.
1100
5581
6139100
... More
Building Work;Providing and fixing of cement concrete Kerb Stone of approved pattern, make of various grades of size: 600mm width x 300 height x 125mm thick (Half Batter, Bull Nose / Full Batter) manufactured in wet press vacuum dewatering technology plant / equivalant with face pimple finish for high visibility with excellent quality and finish and edges perfect and sharp. Grade ? M-25 including excavation in any soil except rock, laying a leveling course of M 15 grade RMC 100mm thick to required slope (inclusive of form work), jointing in C.M. 1:2 proportion flush to concrete surface, painting exposed surface with one coat of primer and two coats of 1st grade road marking paint in the yellow/ white/ black or any shade as directed.
5200
496
2579200
... More
Building Work;Contraction sawn joint groove (using diamond studded blades) 2 mm wide and 1/3 depth of the Cement Concrete pavement (slab). These grooves shall be cut when the concrete is greenish or with in 24hrs of laying.
2000
68
136000
... More
Building Work;Vibrated cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate (with 50% river sand and 50% manufactured sand) conforming to table 1000-2) including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th revision) and as directed by the Engineer-in-Charge for C.C Pavement. (for helipad and parkings)
1237.5
6944
8593200
... More
Building Work;Providing Plain Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (4th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement.
495
4333
2144835
... More
Building Work;Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels)
5637.5
2075
11697812.5
... More
Building Work;Loosening of the ground upto a level of 500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2 MORD / 305 MORTH.
12307.5
98
1206135
... More
Building Work;Construction of embankment with material obtained from borrow pits depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th revision) (Payment will be made based on level for finished item of work).
22355.5
241
5387675.5
... More
Building Work;Construction of embankment, Subgrade and Shoulders with material obtained from borrowed useful earth from outside road boundary CBR = 10%, by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th revision).
23808
403
9594624
... More
Building Work;Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs including cost and conveyance of all materials, sales and other taxes on cost of materials and all operational, incidental and labour charges etc., complete.
13
4119
53547
... More
Building Work;Providing and laying flamed finish tandur stone coping with 25-40 mm thick stone slab of approved color, shade, pattern, groove,5mm x 5mm chamfered edge, size as per the drawing laid over 25 mm (average) thick base of cement mortar 1:8 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, grooves, epoxy grout, etc. all complete as specified and as directed by the Engineerin- Charge; and providing half nosing using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification and direction of EIC
756.86
790
597919.4
... More
Building Work;Providing and laying in position flooring of flame finished tandur stone of approved color, shade, pattern and 25 mm to 40 mm thick size as specified in drawing, laid over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat, curing, cleaning, etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
5221.3
699
3649688.7
... More
Building Work;Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides.for each shutter and ISI make S.S round lock complete for finished item of work Third Floor
331.2
9019
2987092.8
... More
Building Work;Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides.for each shutter and ISI make S.S round lock complete for finished item of work Second Floor
353.12
9019
3184789.28
... More
Building Work;Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides.for each shutter and ISI make S.S round lock complete for finished item of work First Floor
379.8
9019
3425416.2
... More
Building Work;Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides.for each shutter and ISI make S.S round lock complete for finished item of work Ground Floor
410.28
9019
3700315.32
... More
Building Work;Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25 mm x 25 mm) duly a]. Chipping and removing of existing covering on expansion joints b]. Cleaning of the surface from dirt, dust and other contaminations c].Application of one coat of High performance specially designed SBR latex polymer based bonding agent d]. Providing and application of Acrylic Polymer modified reinstatement concrete /mortar to the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top of the joint both sides f]. Providing and fixing of Back up support material of PVC Solid Backer rod to leave the depth of 25 mm on the joint g]. Providing and application of one coat of polysulphide primer on inner edges of Joint. h]. Providing and application of Two part Polysulphide sealant to a width of 25 mm and depth of 25 mm with putty knife and neat finish i]. Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitious coating including cost and conveyance of all materials to site, all incidental, operational, labour charges, cost of overheads & contractor profit complete for finished item of work.
73.25
906
66364.5
... More
Building Work;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Fourth Floor
6562.55
794
5210664.7
... More
Building Work;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Third Floor
4424.57
746
3300729.22
... More
Building Work;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Second Floor
3581.2
698
2499677.6
... More
Building Work;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). First Floor
2954.45
651
1923346.95
... More
Building Work;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Ground Floor
2911.16
603
1755429.48
... More
Building Work;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, all operational, incidental, labour charges, such as mixing cement & cinder, cost of overheads and contractor's profit etc. complete for finished item of work. Third Floor
386.5
4138
1599337
... More
Building Work;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, all operational, incidental, labour charges, such as mixing cement & cinder, cost of overheads and contractor's profit etc. complete for finished item of work. Second Floor
457.93
3944
1806075.92
... More
Building Work;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, all operational, incidental, labour charges, such as mixing cement & cinder, cost of overheads and contractor's profit etc. complete for finished item of work. First Floor
468.47
3750
1756762.5
... More
Building Work;Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. Third Floor
373.24
8292
3094906.08
... More
Building Work;Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. Second Floor
809.06
8292
6708725.52
... More
Building Work;Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. First Floor
839.05
8292
6957402.6
... More
Building Work;Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia (outer 60.30mm dia) pipe and 2mm thick medium class, 25mm dia (33.20 outer dia) horizontal pipe 3 Nos and vertical posts of 50mm dia (60.30 mm outer dia) 1.6mm thick medium class fixed with using bonding agent and anchor fastner and welding, drilling of holes for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work. Ground Floor
811.57
8292
6729538.44
... More
Building Work;Providing Structural steel hollow Tubular sections of 240 MPA grade conforming to IS 1161-2014 of all diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings, including cost and conveyance of all structural steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work. Ground Floor
18000
180
3240000
... More
Building Work;Providing Mild Steel, Structural Steel Plates of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work. Ground Floor
16000
159
2544000
... More
Building Work;Providing Mild Steel Bars, Structural Steel, (Fe 250 grade as per IS 432) I.e., Angles, Channels and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, binding wire of 20SWG, cover blocks, chairs, overlaps, spacers, dowels, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.. Ground Floor
17000
163
2771000
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured out side Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like TATA, SAIL, VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTI) as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Fourth Floor
65.25
90563
5909235.75
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured out side Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like TATA, SAIL, VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTI) as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Third Floor
264.7
88906
23533418.2
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured out side Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like TATA, SAIL, VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTI) as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Second Floor
430.91
87250
37596897.5
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured out side Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like TATA, SAIL, VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTI) as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) First Floor
438.04
85593
37493157.72
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured out side Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like TATA, SAIL, VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTI) as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Ground Floor
1337.85
83936
112293777.6
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured with in Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like AF STAR TMT / MS LIFE TMT , Radha TMT, SUGNA TMT as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Second Floor
18.35
78899
1447796.65
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured with in Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like AF STAR TMT / MS LIFE TMT , Radha TMT, SUGNA TMT as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) First Floor
62.12
77242
4798273.04
... More
Building Work;Supplying, fitting and placing thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 grade / as per structural drawings confirming to IS 1786-1985) manufactured with in Telangana with minimum integrated installed Production of 2 Lakh MT per annum by Primary producers like AF STAR TMT / MS LIFE TMT , Radha TMT, SUGNA TMT as approved by Ministry of steel guidelines) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work ( APSS No.126) Ground Floor
503.22
75586
38036386.92
... More
Building Work;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm Third Floor
177.75
6425
1142043.75
... More
Building Work;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm Second Floor
191.4
6425
1229745
... More
Building Work;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm First Floor
196.26
6425
1260970.5
... More
Building Work;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm Ground Floor
232.04
6425
1490857
... More
Building Work;Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of ? 0.72 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutters with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2 x 1219.2mm) Three shutters with mullion section for sizes and 5?-0 x 4?-0(1524 x 1219.2mm) and 6?-0 x 4?-0(1828.8 x 1219.2mm) Third Floor
954.72
10908
10414085.76
... More
Building Work;Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of ? 0.72 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutters with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2 x 1219.2mm) Three shutters with mullion section for sizes and 5?-0 x 4?-0(1524 x 1219.2mm) and 6?-0 x 4?-0(1828.8 x 1219.2mm) Second Floor
1129.2
10908
12317313.6
... More
Building Work;Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of ? 0.72 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutters with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2 x 1219.2mm) Three shutters with mullion section for sizes and 5?-0 x 4?-0(1524 x 1219.2mm) and 6?-0 x 4?-0(1828.8 x 1219.2mm) First Floor
1556.15
10908
16974484.2
... More
Building Work;Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of ? 0.72 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutters with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2 x 1219.2mm) Three shutters with mullion section for sizes and 5?-0 x 4?-0(1524 x 1219.2mm) and 6?-0 x 4?-0(1828.8 x 1219.2mm) Ground Floor
1566.97
10908
17092508.76
... More
Building Work;Supply and fixing pannelled double shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and 37.5mm thick best teak wood planks, including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Brass fixtures of 8 Nos Butt hinges (IS:12817) - 150 mm Long, 2 No Tower Bolt-10 mm Bolt (IS:15833) 300 mm Long, 1 No. Aldrop (IS:15834) 450 mm long, 1 No flat latch - 450mm long, 4 Nos. Door handles 450 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (2.40X2.40) Third Floor
177.72
16764
2979298.08
... More
Building Work;Supply and fixing pannelled double shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and 37.5mm thick best teak wood planks, including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Brass fixtures of 8 Nos Butt hinges (IS:12817) - 150 mm Long, 2 No Tower Bolt-10 mm Bolt (IS:15833) 300 mm Long, 1 No. Aldrop (IS:15834) 450 mm long, 1 No flat latch - 450mm long, 4 Nos. Door handles 450 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (2.40X2.40) Second Floor
238.32
16764
3995196.48
... More
Building Work;Supply and fixing pannelled double shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and 37.5mm thick best teak wood planks, including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Brass fixtures of 8 Nos Butt hinges (IS:12817) - 150 mm Long, 2 No Tower Bolt-10 mm Bolt (IS:15833) 300 mm Long, 1 No. Aldrop (IS:15834) 450 mm long, 1 No flat latch - 450mm long, 4 Nos. Door handles 450 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (2.40X2.40) First Floor
206.76
16764
3466124.64
... More
Building Work;Supply and fixing pannelled double shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and 37.5mm thick best teak wood planks, including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Brass fixtures of 8 Nos Butt hinges (IS:12817) - 150 mm Long, 2 No Tower Bolt-10 mm Bolt (IS:15833) 300 mm Long, 1 No. Aldrop (IS:15834) 450 mm long, 1 No flat latch - 450mm long, 4 Nos. Door handles 450 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (2.40X2.40) Ground Floor
351.24
16764
5888187.36
... More
Building Work;Supply and fixing single shutter doors as per fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long ? 4 Nos. for single shutter, 8 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. ? 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners ? 6 Nos. with split end tail. d) Nylon Aldrop Receiver ? 1 No. for single shutter frame. e)Tie Rod ? 1 Nodrawing with and Flush door shutters, solid bond wood block` board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 including cost of 2Nos 12mm thick Squaire rods, 5mm thick tinted glass and supplying and fixing aluminimum fixtures of 2 No Tower Bolt-10 mm Bolt (IS:204) 300 mm Long, 1 No. Aldrop (IS:2681) 300 mm long, 1 No flat latch - 300mm long, 4 Nos. Door handles 150 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters etc., complete for finished item of work as per APSS 1001 and 1002. (1.20X2.40) Fourth Floor
60
6911
414660
... More
Building Work;Supply and fixing single shutter doors as per fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long ? 4 Nos. for single shutter, 8 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. ? 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners ? 6 Nos. with split end tail. d) Nylon Aldrop Receiver ? 1 No. for single shutter frame. e)Tie Rod ? 1 Nodrawing with and Flush door shutters, solid bond wood block` board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 including cost of 2Nos 12mm thick Squaire rods, 5mm thick tinted glass and supplying and fixing aluminimum fixtures of 2 No Tower Bolt-10 mm Bolt (IS:204) 300 mm Long, 1 No. Aldrop (IS:2681) 300 mm long, 1 No flat latch - 300mm long, 4 Nos. Door handles 150 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters etc., complete for finished item of work as per APSS 1001 and 1002. (1.20X2.40) Third Floor
201.6
6911
1393257.6
... More
Building Work;Supply and fixing single shutter doors as per fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long ? 4 Nos. for single shutter, 8 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. ? 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners ? 6 Nos. with split end tail. d) Nylon Aldrop Receiver ? 1 No. for single shutter frame. e)Tie Rod ? 1 Nodrawing with and Flush door shutters, solid bond wood block` board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 including cost of 2Nos 12mm thick Squaire rods, 5mm thick tinted glass and supplying and fixing aluminimum fixtures of 2 No Tower Bolt-10 mm Bolt (IS:204) 300 mm Long, 1 No. Aldrop (IS:2681) 300 mm long, 1 No flat latch - 300mm long, 4 Nos. Door handles 150 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters etc., complete for finished item of work as per APSS 1001 and 1002. (1.20X2.40) Second Floor
207.12
6911
1431406.32
... More
Building Work;Supply and fixing single shutter doors as per fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long ? 4 Nos. for single shutter, 8 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. ? 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners ? 6 Nos. with split end tail. d) Nylon Aldrop Receiver ? 1 No. for single shutter frame. e)Tie Rod ? 1 Nodrawing with and Flush door shutters, solid bond wood block` board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 including cost of 2Nos 12mm thick Squaire rods, 5mm thick tinted glass and supplying and fixing aluminimum fixtures of 2 No Tower Bolt-10 mm Bolt (IS:204) 300 mm Long, 1 No. Aldrop (IS:2681) 300 mm long, 1 No flat latch - 300mm long, 4 Nos. Door handles 150 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters etc., complete for finished item of work as per APSS 1001 and 1002. (1.20X2.40) First Floor
261.24
6911
1805429.64
... More
Building Work;Supply and fixing single shutter doors as per fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square metre), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to insert gasket in the frame section, frame section filled with polyurethane foam, cut to length, and joined by way of welding, each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm long ? 4 Nos. for single shutter, 8 Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos. ? 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to stiffeners ? 6 Nos. with split end tail. d) Nylon Aldrop Receiver ? 1 No. for single shutter frame. e)Tie Rod ? 1 Nodrawing with and Flush door shutters, solid bond wood block` board type with teak ply on both faces.: 35 mm thick conforming to IS:2202 including cost of 2Nos 12mm thick Squaire rods, 5mm thick tinted glass and supplying and fixing aluminimum fixtures of 2 No Tower Bolt-10 mm Bolt (IS:204) 300 mm Long, 1 No. Aldrop (IS:2681) 300 mm long, 1 No flat latch - 300mm long, 4 Nos. Door handles 150 mm , 2 No. heavy duty Door Stoppers, 2 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters etc., complete for finished item of work as per APSS 1001 and 1002. (1.20X2.40) Ground Floor
364.14
6911
2516571.54
... More
Building Work;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty Second Floor
897.8
765
686817
... More
Building Work;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty First Floor
1586.04
702
1113400.08
... More
Building Work;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty Ground Floor
3093.66
639
1976848.74
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer Ground Floor
394.02
289
113871.78
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Fourth Floor
40.4
209
8443.6
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Third Floor
40.4
209
8443.6
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. Second Floor
321.97
209
67291.73
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer. First Floor
1665.27
209
348041.43
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer Ground Floor
3700.99
209
773506.91
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Ceiling - Plastic emulsion paint - 2 Coats + 1 coat primer. Second Floor
1240.32
209
259226.88
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Ceiling - Plastic emulsion paint - 2 Coats + 1 coat primer. First Floor
2926.72
209
611684.48
... More
Building Work;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Ceiling - Plastic emulsion paint - 2 Coats + 1 coat primer. Ground Floor
3664.26
209
765830.34
... More
Building Work;External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Fourth Floor
13.48
796
10730.08
... More
Building Work;External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Third Floor
35.39
741
26223.99
... More
Building Work;External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Second Floor
862.4
686
591606.4
... More
Building Work;External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) First Floor
1093.48
632
691079.36
... More
Building Work;External plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6) 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Ground Floor
2919.68
577
1684655.36
... More
Building Work;Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Fourth Floor
13.48
774
10433.52
... More
Building Work;Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Third Floor
20.2
719
14523.8
... More
Building Work;Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Second Floor
301.77
664
200375.28
... More
Building Work;Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) First Floor
1645.07
610
1003492.7
... More
Building Work;Internal Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP , CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground Floor
3709.69
555
2058877.95
... More
Building Work;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Second Floor
1240.32
698
865743.36
... More
Building Work;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) First Floor
2926.72
638
1867247.36
... More
Building Work;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS JACKPROP, CUPLOCK & PIPE SCAFFOLDS), lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) Ground Floor
3664.26
577
2114278.02
... More
Building Work;Providing Kitchen / Toilets Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707) Third Floor
101.33
5870
594807.1
... More
Building Work;Providing Kitchen / Toilets Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707) Second Floor
110.51
5742
634548.42
... More
Building Work;Providing Kitchen / Toilets Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707) First Floor
123.39
5615
692834.85
... More
Building Work;Providing Kitchen / Toilets Platfrom with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work (APSS No.701 & 707) Ground Floor
192.85
5487
1058167.95
... More
Building Work;Providing thread to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (APSS No.701 &707) Third Floor
160.65
1412
226837.8
... More
Building Work;Providing thread to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (APSS No.701 &707) Second Floor
266.13
1360
361936.8
... More
Building Work;Providing thread to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (APSS No.701 &707) First Floor
363.39
1309
475677.51
... More
Building Work;Providing thread to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads (APSS No.701 &707) Ground Floor
585.89
1257
736463.73
... More
Building Work;Providing riser to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Third Floor
75.78
1102
83509.56
... More
Building Work;Providing riser to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Second Floor
132.18
1050
138789
... More
Building Work;Providing riser to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) First Floor
178.84
999
178661.16
... More
Building Work;Providing riser to staircase with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Ground Floor
268.88
947
254629.36
... More
Building Work;Dadooing to walls with any color glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and thickness between 7-8 mm 1st quality of any colour and finish in all shades and designs set over a base coat of CM (1:5) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar as directed by the Engineer-in-charge, curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) Ground Floor
498.93
595
296863.35
... More
Building Work;Flooring with Non-skid / Glazed red or white full body Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and with Nylon spacers filling the joints with epoxy emulsion grout / synthetic / resin adhesive with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) Ground Floor
164.94
976
160981.44
... More
Building Work;Flooring with Shahabad / Tandur Rough Stone slabs of sizes up to 25 mm in thickness or any other size as specified set over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Third Floor
1374.02
786
1079979.72
... More
Building Work;Flooring with Shahabad / Tandur Rough Stone slabs of sizes up to 25 mm in thickness or any other size as specified set over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Second Floor
1612.11
742
1196185.62
... More
Building Work;Flooring with Shahabad / Tandur Rough Stone slabs of sizes up to 25 mm in thickness or any other size as specified set over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) First Floor
1635.65
699
1143319.35
... More
Building Work;Flooring with Shahabad / Tandur Rough Stone slabs of sizes up to 25 mm in thickness or any other size as specified set over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Ground Floor
1901.37
656
1247298.72
... More
Building Work;Providing dadoing to walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Third Floor
2135.13
1102
2352913.26
... More
Building Work;Providing dadoing to walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Second Floor
2437.29
1050
2559154.5
... More
Building Work;Providing dadoing to walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) First Floor
2567.93
999
2565362.07
... More
Building Work;Providing dadoing to walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Ground Floor
3045.06
947
2883671.82
... More
Building Work;Providing skirting to internal walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Third Floor
186.51
1102
205534.02
... More
Building Work;Providing skirting to internal walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Second Floor
243.24
1050
255402
... More
Building Work;Providing skirting to internal walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) First Floor
296.08
999
295783.92
... More
Building Work;Providing skirting to internal walls with Polished Shahabad / Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707) Ground Floor
362.24
947
343041.28
... More
Building Work;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Third Floor
4630.38
986
4565554.68
... More
Building Work;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Second Floor
6583.52
943
6208259.36
... More
Building Work;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) First Floor
10633.25
899
9559291.75
... More
Building Work;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and with Nylon spacers jointed neately with epoxy emulsion grout / synthetic / resin adhesive jointed with to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Ground Floor
11622.42
856
9948791.52
... More
Building Work;S&F of Pre-Cast RCC Grills of any design of 50mm thick manufactured with M-30 grade of conrete using Vibro-compaction process using joint less FRP mouldsd to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation& erection etc,. Third Floor
1996.2
756
1509127.2
... More
Building Work;S&F of Pre-Cast RCC Grills of any design of 50mm thick manufactured with M-30 grade of conrete using Vibro-compaction process using joint less FRP mouldsd to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation& erection etc,. Second Floor
2464.68
756
1863298.08
... More
Building Work;S&F of Pre-Cast RCC Grills of any design of 50mm thick manufactured with M-30 grade of conrete using Vibro-compaction process using joint less FRP mouldsd to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation& erection etc,. First Floor
2707.83
756
2047119.48
... More
Building Work;S&F of Pre-Cast RCC Grills of any design of 50mm thick manufactured with M-30 grade of conrete using Vibro-compaction process using joint less FRP mouldsd to achieve shuttering finish and adequately reinforced for long use and to prevent damage during handling, transportation& erection etc,. Ground Floor
2783.92
756
2104643.52
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 450MM THICK Ground Floor AT 3.67M HEIGHT
399.82
6995
2796740.9
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 380MM THICK Ground Floor AT 3.67M HEIGHT
163.9
6303
1033061.7
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 300MM THICKGround Floor AT 3.67M HEIGHT
1770.82
5513
9762530.66
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Fourth Floor AT 4.27M HEIGHT
925
5376
4972800
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Third Floor AT 4.27M HEIGHT
1937.01
5267
10202231.67
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Second Floor AT 4.27M HEIGHT
1937.01
5159
9993034.59
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK First Floor AT 4.27M HEIGHT
1937.01
5051
9783837.51
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Ground Floor AT 4.27M HEIGHT
2908.5
4942
14373807
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Fourth Floor 3.67m height
2121.52
4896
10386961.92
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Third Floor 3.67m height
4314.32
4803
20721678.96
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Second Floor 3.67m height
6727
4710
31684170
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK First Floor 3.67m height
7110.44
4617
32828901.48
... More
Building Work;Supply and placing of the M-30 Grade - Form-finish, Design Mix Self-Compacting Concrete (SCC) corresponding to IS 456 with minimum cementatious content of 400 kgs per 1 cum (300 Kgs of OPC 53 Grade Cement conforming to IS 12269:2013 and 100 Kgs of Fly-Ash conforming to IS 3812 :2013) using Batching Plant of 45/60 cum per hour capacity, Transit mixer 6 cum capacity, concrete Pump and using 10 mm size course aggregate conforming to IS 383: 2016 from approved quarry, fine aggregate (with 50% river sand & 50% manufactured sand), water etc., to site excluding seigniorage charges but including sales & other taxes on all materials, using MS cuplock and Aluminium shuttering etc., to obtain best form-finish including all operational, incidental and labour charges such as batching plant, transportation, laying concrete using concrete pump , curing etc.,complete including hire charges for centering and shuttering, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SHEAR WALL 200MM THICK Ground Floor 3.67m height
14907.84
4525
67457976
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Slabs 150 mm thick Fourth Floor 3.66M HEIGHT
119.56
2041
244021.96
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Slabs 150 mm thick Third Floor 3.66M HEIGHT
1157.95
2002
2318215.9
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Slabs 150 mm thick Second Floor 3.66M HEIGHT
1217.73
1962
2389186.26
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Slabs 150 mm thick First Floor 3.66M HEIGHT
1499.38
1923
2883307.74
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. forSlabs 150 mm thick Ground Floor 3.66M HEIGHT
1789.56
1883
3369741.48
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC Beams Third Floor 3.66M HEIGHT
59.66
15623
932068.18
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC Beams Second Floor 3.66M HEIGHT
62.37
15275
952701.75
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. forr RCC Beams First Floor 3.66M HEIGHT
78.8
14927
1176247.6
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC Beams Ground Floor 3.66M HEIGHT
118.87
14579
1733005.73
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 250 mm thick Second Floor 3.66M HEIGHT
125.01
2843
355403.43
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 250 mm thick First Floor 3.66M HEIGHT
1042.38
2803
2921791.14
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 250 mm thick Ground Floor 3.66M HEIGHT
1042.38
2762
2879053.56
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Third Floor 4.27M HEIGHT
522.16
2793
1458392.88
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Second Floor 4.27M HEIGHT
522.16
2745
1433329.2
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick First Floor 4.27M HEIGHT
522.16
2698
1408787.68
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Ground Floor 4.27M HEIGHT
522.16
2650
1383724
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Third Floor 3.66M HEIGHT
1119.96
2573
2881657.08
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Second Floor 3.66M HEIGHT
1199.06
2532
3036019.92
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick First Floor 3.66M HEIGHT
1119.96
2492
2790940.32
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 200 mm thick Ground Floor 3.66M HEIGHT
1122.05
2451
2750144.55
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Third Floor 4.27M HEIGHT
264.19
2637
696669.03
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Second Floor 4.27M HEIGHT
264.19
2590
684252.1
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick First Floor 4.27M HEIGHT
264.19
2542
671570.98
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Ground Floor 4.27M HEIGHT
264.19
2495
659154.05
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Third Floor 3.66M HEIGHT
361.32
2417
873310.44
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Second Floor 3.66M HEIGHT
361.32
2377
858857.64
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick First Floor 3.66M HEIGHT
361.32
2336
844043.52
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 175 mm thick Ground Floor 3.66M HEIGHT
743.27
2296
1706547.92
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Fourth Floor 4.27M HEIGHT
113.9
2481
282585.9
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Third Floor 4.27M HEIGHT
908.64
2435
2212538.4
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Second Floor 4.27M HEIGHT
908.64
2389
2170740.96
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick First Floor 4.27M HEIGHT
908.64
2343
2128943.52
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Ground Floor 4.27M HEIGHT
908.64
2297
2087146.08
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Fourth Floor 3.66M HEIGHT
196.94
2261
445281.34
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Third Floor 3.66M HEIGHT
1740.3
2222
3866946.6
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Second Floor 3.66M HEIGHT
3543.93
2182
7732855.26
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick First Floor 3.66M HEIGHT
4223.07
2143
9050039.01
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 150 mm thick Ground Floor 3.66M HEIGHT
6102.36
2103
12833263.08
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 125 mm AT Third Floor 3.66M HEIGHT
239
2066
493774
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 125 mm AT Second Floor 3.66M HEIGHT
239
2027
484453
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 125 mm AT First Floor 3.66M HEIGHT
239
1987
474893
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slabs 125 mm AT Ground Floor 3.66M HEIGHT
222.62
1948
433663.76
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Fourth Floor 4.27M HEIGHT
8.78
19868
174441.04
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Third Floor 4.27M HEIGHT
91.96
19462
1789725.52
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Second Floor 4.27M HEIGHT
91.96
19056
1752389.76
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam First Floor 4.27M HEIGHT
91.96
18650
1715054
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Ground Floor 4.27M HEIGHT
91.96
18244
1677718.24
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Fourth Floor 3.66M HEIGHT
8.49
17928
152208.72
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Third Floor 3.66M HEIGHT
140.61
17580
2471923.8
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Second Floor 3.66M HEIGHT
721.79
17232
12437885.28
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam First Floor 3.66M HEIGHT
577.59
16884
9752029.56
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof beam Ground Floor 3.66M HEIGHT
604.05
16536
9988570.8
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC WALLS IN BUILDINGS Fourth Floor 3.66M HEIGHT
389.76
4645
1810435.2
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC WALLS IN BUILDINGS Third Floor 3.66M HEIGHT
1534.92
4553
6988490.76
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC WALLS IN BUILDINGS Second Floor 3.66M HEIGHT
1729.8
4460
7714908
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC WALLS IN BUILDINGS First Floor 3.66M HEIGHT
2109.59
4367
9212579.53
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for RCC WALLS IN BUILDINGS Ground Floor 3.66M HEIGHT
3709.21
4274
15853163.54
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Second Floor 3.66M HEIGHT
0.14
17002
2380.28
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS First Floor 3.66M HEIGHT
0.27
16588
4478.76
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Ground Floor 3.66M HEIGHT
0.45
16173
7277.85
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for LINTELS Fourth Floor 3.66M HEIGHT
0.91
19170
17444.7
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS Third Floor 3.66M HEIGHT
24.05
18874
453919.7
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS Second Floor 3.66M HEIGHT
34.69
18579
644505.51
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS First Floor 3.66M HEIGHT
49.82
18283
910859.06
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS Ground Floor 3.66M HEIGHT
55.24
17987
993601.88
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Fourth Floor 3.66M HEIGHT
1.08
18159
19611.72
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Third Floor 3.66M HEIGHT
23.8
17744
422307.2
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Second Floor 3.66M HEIGHT
52.54
17329
910465.66
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS First Floor 3.66M HEIGHT
75.89
16914
1283603.46
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Aluminium shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS Ground Floor 3.66M HEIGHT
238.51
16499
3935176.49
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS for ground floor
79.64
16173
1288017.72
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Grade Slab
2553.23
12822
32737515.06
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS Third Floor
55.6
10213
567842.8
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS Second Floor
81.68
10098
824804.64
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS First Floor
118.18
9982
1179672.76
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS Ground Floor
223.31
9867
2203399.77
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PLINTH .
732.73
14040
10287529.2
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PEDESTALS .
16.41
10639
174585.99
... More
Building Work;Supply and placing of the M-30 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using Batching Plant of 45/60 cum per hour capacity ,Transit mixer 6cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using MS cuplock Ms plate shuttering etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for FOUNDATIONS.
4762.04
9867
46987048.68
... More
Building Work;Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Third Floor
267.6
1250
334500
... More
Building Work;Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Second Floor
299.28
1154
345369.12
... More
Building Work;Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) First Floor
349.03
1058
369273.74
... More
Building Work;Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand(50% of river sand & 50 % of manufactured sand), blocks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges(MS Jackprof ,Cuplock ) and all labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) Ground Floor
461.74
962
444193.88
... More
Building Work;Solid Fly-ash Block masonry 200 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x200x140) Fourth Floor
19.36
10681
206784.16
... More
Building Work;Solid Fly-ash Block masonry 200 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x200x140) Third Floor
10.8
10069
108745.2
... More
Building Work;Solid Fly-ash Block masonry 200 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x200x140) Second Floor
110.24
9457
1042539.68
... More
Building Work;Solid Fly-ash Block masonry 200 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x200x140) First Floor
290.66
8845
2570887.7
... More
Building Work;Solid Fly-ash Block masonry 200 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand(50% river sand & 50 % Manufacture sand), blocks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges(with MS jack prop Cuplock pipes Scaffolding), constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x200x140) Ground Floor
910.4
8232
7494412.8
... More
Building Work;Raised Pointing to RR/ CRS Masonry in CM (1:3) (with 50% river sand & 50% manufactured sand) including cost and conveyance of all materials in site, curing, labour charges etc, overheads & contractors profit, complete for finished item of work.
3596.85
128
460396.8
... More
Building Work;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
1007.12
4535
4567289.2
... More
Building Work;Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks and Hold Fasts for finished item of work. (APSS No. 402): HAND MIXING for Bed Blocks and Bed for Sills Ground Floor
75.19
5928
445726.32
... More
Building Work;Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
7170.3
4626
33169807.8
... More
Building Work;Conveyance of un-useful excavated earth/rock to an average distance of 1 KM using mechanical means for disposal as per the instruction of the Engineer-in-charge including cost and conveyance of all materials, all operational, incidental labour charges and overheads & contractors profit complete for finished item of work.
24872.1
43
1086910.77
... More
Building Work;Filling with carted gravel in trenches,sides of foundations and basement in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water, gravel to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) Mechanical
8029.12
451
3621133.12
... More
Building Work;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310) Mechanical
70563.38
164
11572394.32
... More
Building Work;Pre construction Anti termite is a process in which chemical toxic to sub terrain termites is apply/ inject into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding, cost of overheads and contractors profit, etc. complete for furnished item of work as per the approval of the Engineer-in-charge (Plinth area measurements will be taken for payment)
21533.78
165
3553073.7
... More
Building Work;Drilling of 18mm dia holes in hard granite or sheet rock, cleaning the holes manually, supplying & fixing of 25mm dia bars in rock and in concrete fixed in drilled hole with two parts system of epoxy bonding adhesive conforming to ASTM-C881 at 0.60 Kgs per RM including cost and conveyance of epoxy and all materials to site and labour complete as per approved drawing/ as per site conditions excluding cost of reinforcement and its fabrication as directed by the Engineer-in-Charge including cost of and overheads & contractors profit etc., complete for fnished item of work
913
453
413589
... More
Building Work;Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308) upto 3m depth
10419.29
3757
39145272.53
... More
Building Work;Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308) Mechanical means upto 3m depth
26066.95
168
4379247.6
... More
Building Work;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means-5m - 6m depth
90.89
206
18723.34
... More
Building Work;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means- Upto 3m Depth
16987.81
159
2701061.79
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) 5m - 6m depth
55.43
3256
180480.08
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) 4m - 5m depth
277.14
3006
833082.84
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) 3m - 4m depth
411.33
2755
1133214.15
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) upto 3m depth
12193.42
2505
30544517.1
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)5m - 6m depth
22.17
145
3214.65
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)4m - 5m depth
110.86
134
14855.24
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)3m - 4m depth
164.53
123
20237.19
... More
Building Work;Earth work excavation (Sumps, Tanks and Open Excavation) (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)upto 3m depth
20485.03
112
2294323.36
... More
Building Work;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-5m - 6m depth
33.26
118
3924.68
... More
Building Work;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-4m - 5m depth
166.28
109
18124.52
... More
Building Work;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-3m - 4m depth
1580.8
100
158080
... More
Building Work;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth
25580.89
91
2327860.99
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%