Telangana State Cooperative Oilseeds Growers Federation Limited Tender

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Removing and carefully stacking of Pre-Engineered steel building sections Columns with a mazimum lead of 200 mtrs as directed by the engineer in charge complete for finished item of work.

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Removal of existing Flashings carefully stacking with necessary tools and tackles. With a maxium lead of 200 mts and Refixing the same with necessary accessories complete as directed by the engineer in charge for finished item of work

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Refixing of the useful existing color coated sheets with necessary tools and tackles withaccessories complete as directed by the engineer in charge for finished item of work

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Removal and carefully stacking of existing color coated sheets with necessary tools and tackles. With a maxium lead of 200 mts as directed by the engineer in charge complete for finished item of work

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply and Errection of Ventilation Turbo Air Ventilator System(Aluminum) with Aluminium Base Plate, For Industrial, Size: 24 Inch(610mm) with neccesary accessories including labour charges

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Providing 10mm thick UV resistant multiwall polycarbonate sheets fixed to the purlins with aluminum universal glazing set 40mm wide for jointing and fixing sheets and 14 size selfdrilling screws with neoprene washer. Side laps are stitched with self-tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape including cost and conveyance of all materials and labour charges, overheads and contractor's profits , etc. complete for finished item of work - Sky Lights

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.Paint coating: Regular Modified Polyester painting.Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 m including fixing by means of self drilling,self tapping screws including all charges

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads & contractors profit, etc. complete for finished item of work (APSS No.1200, 1207 & 1211)

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Structural Members a) Frame: Supply of Primary (Built-up) sections are fabricated from hot rolled steel plates conforming to ASTM A 572M Grade 345 (or equivalent) type 2 with minimum yield strength of 345 MPa. Flanges are welded to the web by a continuous single side fillet weld deposited by an automatic submerged arc welding process. Supply of Hot rolled sections are mill produced according to ASTM A36 M with minimum yield strength of 345MPa (50 ksi). Supply of Galvanized secondary members are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), with zinc coating to Z275 designation (275/ 120 g/m2) having a minimum yield strength of 345/450 MPa.

Civil works for 60 TO 90 TPH Expn at OPP,Appt;White washing three coats with paint grade white lime to Walls/ceiling and basement to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of alll materials to site , labour charges and incidental charges such as scaffolding , lift charges etc., complete and cost of overheads & contractors profit complete for finished item of work .

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Plastering 12mm thick in two coats using 100% screened natural sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Masonry work in CM(1:6) prop (Cement :50% Screened sand & 50% Rock sand) with fly ash cement solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504).

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Plinth Beam

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Providing and laying of grouting for the gap between the base plates and pedestals using with grouting material of fosroc conbextra GP2 grout/Sysgrout 652 of venders specifications etc., including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Bitumeness sand topping for tank yard

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Epoxy Coating of 5mm thick for walls as per Manufacturer Specifications, including labour and Material charges for finished item of works.

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Dismantling of Existing Cement Concrete

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

Civil works for 60 TO 90 TPH Expn at OPP,Appt;VDF - Providing, machine mixing and laying of 75mm thick vacuum dewatered (Tremix) concrete of grade M25 with granite metal for plain cement concrete as per detailed drawings including dewatering, steel form work, compaction in panels of 2.5m x 2.5m and as per recommendation of manufacturer of equipment, cutting grooves in concrete structurally required to allow expansion of joint about of 6mm wide and 10mm deep, filling grooves with pour quality bitumen or sealant of approved make, power floating and finishing smooth as specified/instructed, cleaning, curing surface etc. all complete to the entire satisfaction of the EIC (TDSS 402).(Special Specification) ( Rate includes M25 RMC also)

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Slab 150mm Thickness

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pedestals

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Footings

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, (50% natural sand+50% Rock sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)

Civil works for 60 TO 90 TPH Expn at OPP,Appt;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.