Telangana State Cooperative Oilseeds Growers Federation Limited Tender

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Removing the side cladding/ sheeting of existing PKO shed and re- fixing in extended portion of PKO shed including all necessary structural steel and nepprine screws complete

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply of 2.0 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410A with COP not less than 3.25 w/w split AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3.5 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible chord , built-in stabilizer (Voltage range 160- 264 volts) and cordless remote control (ELEC-6.1.1-e) along with Supply, Fabrication of 1set MS bracket suitable for fixing (ELEC-6.6.1) and including Installation Charges. Etc for final work

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and providing the 4core 10 sqmm end terminations with Single compression heavy duty glands, heavy duty Al. lugs including tapping, crimping etc complete.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Laying of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) laid on existing cables trays with necessary clamps for tying the cable to tray including cost and conveyance of all materials and labour charges etc., complete

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and providing the 4core 16 sqmm end terminations with Single compression heavy duty glands, heavy duty Al. lugs including tapping, crimping etc complete

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 with 1 No 63A FP 30mA RCBO and 12 Nos 6-32 A 10kA ISI Marked C/D curves MCBs including all connections and labour charges for Flush Mounting etc., complete. (SD 4.4.4 a) TPN DB Makes: Legrand / Schneider/Siemens/L&T . Isolator Makes: Legrand / Schneider/Siemens/L&T Exora .SP, MCBs Makes: Legrand / Schneider /Siemens/L&T Exora

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of Modular telephone Jack with connector on modular box with cover frame in existing surface / concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes: Legrand Myrius / Cabtree Thames Platinum / Million Logus / Gold Medal Curve / GM Four Five / Anchor Roma viola / CPL / Panasonic Vision

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and run of 2 Pair, 0.5mm telephone copper wire in existing pipe including all labour charges etc., complete.Makes: Gold Medal / Million / Finolex / Surabi / Polycab.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate and all labour charges etc., complete . Makes: D Link / AMP / Molex / Legrand / Krone.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Run of LAN Cable cat - 6 UTP cable. in existing pipe including all labour charges etc., complete.Makes: D Link / AMP / Molex / Legrand / Krone

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply , transportation, and fixing of 22W, 2500 lumens, 1185mm length LED batten, housing made with alluminium extrusion, wide operating voltage range from 140V-2720V AC, PF=0.9, IP 20 , Class -C serviceability, THD<20%, CCT: 4000K / 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc suitable for mounting on wall/surface/suspendable complete with 5 years warranty. LUMINAIRE MAKE: Phillips model Number BN021LED25S6500PSU GR S1 LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and transportation of 60. LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's, System efficacy >100 lm / W and junction temperature < 70°C, with Ingress protection IP65, IK05, Driver surge protection 4KV, external Surge protection = 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K -5700K, minimum CRI>70, etc., complete with BIS certification with warranty 5 years warranty.The contractor must furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar /Panasonic / Eveready / Halonix / Keselec /HAVELLS / SURYA / SYSKA / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and transportation and fixing of 18W LED slim panel Light Housing made of Powder coated aluminum housing , Round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. LUMINAIRE MAKE : Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells / Halonix / HPL / Syska / Surya. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.SOR 17-18.ELEC-3.9.10

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Run of 3of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains, ferrules including all labour charges etc., complete. for lighting TPN DBs and computer TPN DBs. Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Run of 3 of 56/0.3mm (4.00 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains, ferrules including all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Run of 3 of 36/0.3mm (2.50 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains, ferrules including all labour charges etc., complete.Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.. Accessories Makes : Legrand Myrius / Cabtree Verona / Gold Medal Curve / Anchor Roma viola / Great White /GM Four-Five / L&T / Salzar

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. Accessories Makes : Legrand Myrius / Cabtree Verona / Gold Medal Curve / Anchor Roma viola / Great White /GM Four-Five / L&T / Salzar

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring, ferrules including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B . Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 rigid PVC pipe concealed in wall with all required Metallic Junction Boxes including masonry work and labour charges etc., complete for Run of mains.Makes : Sudhakar / Goldmedal / Modi / AKG / VIP / Million Plast / Precision

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 rigid PVC pipe concealed in wall with Metallic junction boxes and all required accessories including masonry work for light, fan and separate plug point with including all labour charges etc., complete.Makes : Sudhakar / Goldmedal / Modi / AKG / VIP / Million Plast / Precision

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and fixing of ISI marked 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe on surface of existing steel structure/ cable tray with PVC / Metallic junction boxes with accessories like Saddles/clamps ,screws etc including all labour charges etc., complete for Run of mains. and lighting points .Makes : Sudhakar / Goldmedal / Modi / AKG / VIP / Million Plast / Precision

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Laying of ISI 25mm outer dia heavy grade (2.10mm thickness) IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including labour charges etc., complete.Makes : Sudhakar / Goldmedal / Modi / AKG / VIP / Million Plast / Precision

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing and laying of grouting for the gap between the base plates and pedestals using with grouting material of conbextra GP2 grout/Sysgrout 652 of venders specifications etc., including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and Errection of Ventilation Turbo Air Ventilator System(Aluminum) with Aluminium Base Plate, For Industrial, Size: 24 Inch(610mm) with neccesary accessories including labour charges

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply & fixing of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc.made of Prepainted Galvalume sheets 0.50mm thick, required Width, Length: Maximum 2½Meters including fixing by means of self drilling,self tapping screwsto suit the Roofing pattern including all charges

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing 10mm thick UV resistant multiwall polycarbonate sheets fixed to the purlins with aluminum universal glazing set 40mm wide for jointing and fixing sheets and 14 size selfdrilling screws with neoprene washer. Side laps are stitched with self-tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape including cost and conveyance of all materials and labour charges, overheads and contractor's profits , etc. complete for finished item of work - Sky Lights

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.Paint coating: Regular Modified Polyester painting.Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 m including fixing by means of self drilling,self tapping screws including all charges

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Painting to new iron works with two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work of approved brand after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads & contractors profit, etc. complete for finished item of work (APSS No.1200, 1207 & 1211)

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing, Fabrication & erection of Trusses etc using Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters & Base plates, cleats etc including cutting,welding Erection, including cost and conveyance of all materials to work site and all operational, incidental, labour charges including cost of overheads & contractors profit complete for finished item of work

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing, laying Reinforced cement concrete Hume pipes of following Dia., NP-2 class for pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 600mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work including Earthwork excavation, laying of PCC (1:4:8), fixing of hume pipes

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar1:3prop;½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including providing 4" coving with cement concrete in (1:2:4) prop. rounding off the wall and slab junction etc., complete for finished item of work. (APSS No. 901 & 903)

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Vibrated cement concrete M 35 grade using 20mm & 10mm HG/HT crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate ( 50% natural sand + 50% rock sand) conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HG/HT crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate ( 50% natural sand + 50% rock sand) conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per SBD specification as directed by the Engineer-in-Charge for Cover Slab

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HG/HT crushed stone aggregate and fine aggregate ( 50% natural sand + 50% rock sand)conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below Drain

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels)

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Making provision for pockets in RCC/PCC foundations including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing and laying of grouting for the gap between the base plates and pedestals using with grouting material of conbextra GP2 grout/Sysgrout 652 of venders specifications etc., including cost & conveyance of all materials, all incidental, operational and Labour charges etc for finished item of work. as per the directions of the engineer in charge

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with 16mm thick Bio guard plain Beveled Tegular Edge Tiles with Armstrong Suprafine 15mm face exposed grid. The tiles shall have smooth bright visual with Humidity Resistance (RH) of 99%, NRC 0.15 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 35db as per ASTM E1414, Light Reflectance =89% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1as per BS 476 Part6/7 and Class A as per ASTM E 84 with 16mm beveled tegular edge and 8mm drop in module size of 600 x 600mm. The scrim on the face of the tile shall be cleanable, washable up to 150 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated with Anti-Microbial coating on the face and wax coating on the back to resist permeability. Tiles to be tested for antimicrobial activity having ?total inhibition? as per TNO Seed Layer test & ?inhibition? as per Kirby Bauer agar diffusion test (excluding Pseudomonas Aeruginosa) and efficacy greater than 2 as per JIS-Z 2801- 2010.It shall be suitable for Green Building application, with Recycled content of 37%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on rmstrong Suprafine 32 with 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke otary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 10.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 8.8 kg/m. The end details of the cross tee shall be madeof pre hardened steel and fixed to the ends of the cross tee to provide double locking between ?cross tee to cross tee? and ?cross tee to main beam?. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. The Tile & Grid system used together shall carry a 30 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications above) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Armstrong recommended procedure. SUSPENSION SYSTEM accessories consisting of M6 Anchor Fasteners with hanger hole, prestraightened hanger wire of dia ? 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supplying and fixing MDF Board: Plain-Exterior using 35 mm thick conforming to IS 15932 fixing to Aluminium angles 24x24mm, T sections 24x24.5x2.4mm & channels along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using with Cleat and steel expansion fasteners & connecting clip to the ceiling channels fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge MDF board with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia MDF board Ltd specification.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supplying and fixing of Unplasticized PolyVinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no?s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Flooring with Supply of full body heavy duty industrial variety porcelain vitrified tile of size 300 x 300 / 200 x 100 mm and thickness between 10-12 mm 1st quality conforming to IS:15622 -2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;White washing three coats with paint grade white lime to walls and basement to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of alll materials to site , labour charges and incidental charges such as scaffolding , lift charges etc., complete and cost of overheads & contractors profit complete for finished item of work .

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plastering 20mm thick in two coats using 100% screened natural sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) From 3.6m to 5.5m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plastering 20mm thick in two coats using 100% screened natural sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground floor upto 3.6m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plastering 12mm thick in two coats using 100% screened natural sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) From 3.6m to 5.5m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plastering 12mm thick in two coats using 100% screened natural sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground floor upto 3.6m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Masonry work in CM(1:6) prop (Cement :50% Screened sand & 50% Rock sand) with fly ash cement solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504). From 3.6m to 5.5m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Masonry work in CM(1:6) prop (Cement :50% Screened sand & 50% Rock sand) with fly ash cement solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contractors profit etc., complete for finished item of work. (APSS No. 501 & 504). Ground floor upto 3.6m

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing and laying grooves with bitumen filling in VDF flooring

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Providing and laying vaccum dewatered flooring 75mm thick with cement concrete of garde not less than M20 using nominal mix of 1:11/2:3(1 cement:11/2 coarse sand:3 graded aggregate of 20 mm nominal size), channel form work including levelling, consolidation with vibrating table and withdrawel of excess water and finishing with compactor/ power trowel with sprinking of cement, cutting of grooves of size 4x15 mm deep in early set concrete along the length of specified longitudinal and transverse joints (groove spacing should not exceed more than 5m in either direction) using diamond point concrete saw, filling the grooves with approved joint filler polysulphide sealent making, rounding of edges along the walls with extra cement mortar neat and smooth etc., complete as per specification.

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 200 thk RCC walls

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Tie Beams

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Plinth Beams

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Pedestals Above Ground

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Pedestals below Ground

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Supply and placing of Design Mix Concrete M 25grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(50% natural sand+50% Rock sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Random Rubble stone masonry in CM (1:8) prop: (Cement: 50% Screened sand & 50% Rock sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615).

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, (50% natural sand+50% Rock sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)

CIVIL WORKS FOR MEE AT OPP,APPRAOPET;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.