Telangana State Cooperative Oilseeds Growers Federation Limited Tender

Appt plant expansion 2021 22;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Appt plant expansion 2021 22;Demolishing of Existing Condensate Pit 1 & 2 along with Pump Pedestal, and Blow Off Vessel foundation

Appt plant expansion 2021 22;VDF - Providing, machine mixing and laying of 75mm thick vacuum dewatered (Tremix) concrete of grade M25 with granite metal for plain cement concrete as per detailed drawings including dewatering, steel form work, compaction in panels of 2.5m x 2.5m and as per recommendation of manufacturer of equipment, cutting grooves in concrete structurally required to allow expansion of joint about of 6mm wide and 10mm deep, filling grooves with pour quality bitumen or sealant of approved make, power floating and finishing smooth as specified/instructed, cleaning, curing surface etc. all complete to the entire satisfaction of the EIC (TDSS 402).(Special Specification) ( Rate includes M25 RMC )

Appt plant expansion 2021 22;White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Appt plant expansion 2021 22;Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Appt plant expansion 2021 22;Brick Masonry in superstructure with CM (1:8) prop: using second class bricks of size 23 x 11 x 7 Cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

Appt plant expansion 2021 22;Providing homogeneous embankment using soil from approved borrow area in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all operations such as watering, compacting to density control of not less than 95 percent or as stipulated using 8T roller etc., complete with initial lead upto 1 km and all lifts

Appt plant expansion 2021 22;Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310.

Appt plant expansion 2021 22;Removing and carefully stacking of Pre-Engineered steel building sections Columns with a mazimum lead of 200 mtrs as directed by the engineer in charge complete for finished item of work.

Appt plant expansion 2021 22;Removal of roof purlins & side runners carefully stacking with necessary tools and tackles. With a maxium lead of 200 mts and Refixing the same with necessary accessories complete as directed by the engineer in charge for finished item of work

Appt plant expansion 2021 22;Removal and carefully stacking of existing Canopy with necessary tools and tackles. With a maxium lead of 200 mts as directed by the engineer in charge complete for finished item of work

Appt plant expansion 2021 22;Removal of existing Flashings carefully stacking with necessary tools and tackles. With a maxium lead of 200 mts and Refixing the same with necessary accessories complete as directed by the engineer in charge for finished item of work

Appt plant expansion 2021 22;Refixing of the useful existing color coated sheets with necessary tools and tackles withaccessories complete as directed by the engineer in charge for finished item of work

Appt plant expansion 2021 22;Removal and carefully stacking of existing color coated sheets with necessary tools and tackles. With a maxium lead of 200 mts as directed by the engineer in charge complete for finished item of work

Appt plant expansion 2021 22;Supply and fixinmg of Wind Driven Turbo Ventilator of 600 throat dia with spherical vanes.

Appt plant expansion 2021 22;Skylight - Supply and fixing of 2.0mm thick FRP Lighting sheets with UV protection film including fixing with necessary bolts and washers etc complete to the profile of roof and wall as directed by the engineer in charge.

Appt plant expansion 2021 22;Flashings: Supply & Fixing of flashing and / or trim, down take pipes shall be furnished at the rake, corners, eaves, service openings and framed openings and matching with the color of wall. Material shall match with the physical specifications of sheeting of 0.5 mm thk. as per drawings complete for finished item of work as directed by the engineer incharge.a) For all girths.

Appt plant expansion 2021 22;Gutters - 0.5mm thk color coated galvalume sheets to the given shape with necessary gutter bearers, stop ends, crank bolts, all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, levelling, providing and fixing bolts, nuts, washers etc., confirming to latest specification and including straightening, cutting, welding, bending to shape complete for finsihed item of work.

Appt plant expansion 2021 22;Supply & Fixing of 0.5mm thick, 550 Mpa- AZ150 GSM, approved profiled RMP colour coated Galvalume sheet of Tata BSL / JSW or equivalent, for external and internal face standard fixing with sheeting fasteners self tapping sheet metal screws of make Build-ex/Hilti/Corosheild, metal and neoprene washers with hexogonal heads colour coated to match the sheeting and made of Zinc plated steel, Sealer shall be 6mm wide x 5mm thick butyl tape provided along the side laps and end laps of roof panels, pressed sensitively, the sealer shall be non asphaltic, non shrinking, non drying, non toxic and shall have superior adhesion to metals, plastics and painted surfaces, etc., complete all as per approved manufacturer's specifications and as directed for Side and Gable cladding, complete.

Appt plant expansion 2021 22;Supply & Fixing of 0.5mm thick, 550 Mpa- AZ150 GSM, approved profiled RMP colour coated Galvalume sheet of Tata BSL/JSW or equivalent, for external and internal face standard fixing with sheeting fasteners self tapping sheet metal screws of make Build-ex/Hilti/Corosheild, metal and neoprene washers with hexogonal heads colour coated to match the sheeting and made of Zinc plated steel, Sealer shall be 6mm wide x 5mm thick butyl tape provided along the side laps and end laps of roof panels, pressed sensitively, the sealer shall be non asphaltic, non shrinking, non drying, non toxic and shall have superior adhesion to metals, plastics and painted surfaces, etc., complete all as per approved manufacturer's specifications and as directed for roof including profiled ridge cap, complete.

Appt plant expansion 2021 22;All primary & secondary bolted connections shall be provided with electro-galvanized high strength bolts, washers, nuts conforming to specifications of grade 8.8 of IS 1367 or A 325

Appt plant expansion 2021 22;Supply & Erection of Pipe bracings, hand rails, pipe struts, brace rods, Anchor bolts, sag rods & templates etc as per preliminary general arrangement plans & sections. which has a minimum yield strength of 250 Mpa and will confirm to the physical specification of IS 2062, IS 4923 & IS 1161.

Appt plant expansion 2021 22;Supply & Erection of Pre-Engineered steel building sections as per the preliminary general arrangement plans & sections. All secondary structural framing shall refer to Galvanized iron(120 gsm) cold formed purlins, girts, eaves struts, flange braces, clips, gable angle and other miscellaneous structural parts which has a minimum yield strength of 250 Mpa

Appt plant expansion 2021 22;Supply & Erection of Pre-Engineered steel building sections as per the preliminary general arrangement plans & sections. All primary steel (refer to rigid frames, lean to rafters, columns, mezanine beams, canopy rafter, interior column members and end wall wind columns etc.,) shall be built up sections from plates shall have flanges and web joined on one side of the web by continuous welding process. The plate shall have a minimum yield strength of 250 Mpa, The built up sections shall be prepared by continuous submerged arc welding to double side complete for finsihed item of work including one coat of primer and Two coats of Synthetic enamel paint of approved color complete for finished item of work

Appt plant expansion 2021 22;Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Appt plant expansion 2021 22;Providing and constructing coursed rubble face stone masonry using approved rubble stones in cement mortar 1 : 4 proportion including cost of all materials, machinery, labour, scaffolding, ramps, cleaning, packing mortar, wedging stone chips, curing etc., with initial lead upto 1 km and all lifts.

Appt plant expansion 2021 22;Providing High Yield Strength Deformed (HYSD) steel bars (Fe 550 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Appt plant expansion 2021 22;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement as per Clause 1501.2.2 M15 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD

Appt plant expansion 2021 22;Vibrated Reinforced Cement Concrete M30 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc.

Appt plant expansion 2021 22;Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed.

Appt plant expansion 2021 22;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Septic Tank Foundation