State Warehousing Corporation Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 20,000 M.t. (4 X 5,000 M.t.) Capacity Godowns Including Ancillary Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
285970Bid Award Id
ViewTender No
0200/01/TSWC/Const/2021-22, Dt: 11.01.2022Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing Vibrated Cement Concrete (1:3:6) using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 5th Revision) and as directed by the Engineer-in-Charge for body walls
1240
7130000
5750
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
3010
297990
99
Supply, collection and filling of gravel from approved quarry including cost, conveyance, consolidation, watering etc.,as directed by the officer in charge of work
3000
1437000
479
Vibrated reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, vibrating, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Footings
600
5934600
9891
For Columns
430
5646760
13132
For Plinth beam of 0.3MT wide & 0.3MT depth
116
1529924
13189
For Tie Beam @ 0.23MT wide & 0.45MT depth
135
1851930
13718
For Roof Beam @ 0.34MT wide & 0.45MT depth
206
2888120
14020
For Ridge Beam @ 0.23MT wide & 0.45MT depth
22
311784
14172
For Gutter slab 125mm thick & Impervious coat of 20 mm thick in CM (1:3) prop at 5.05 MT level from floor level
820
2386200
2910
Reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for thec following items and as directed by the officer in charge of work.
-
-
-
For Plinth beam 0.10m depth
100
1318900
13189
For Lintels over Openings
51
687225
13475
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., for the following items and as directed by the officer in charge of work. For Bed Blocks
2
13840
6920
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
-
-
-
For superstructure upto 3.00M Height
715
4826965
6751
For superstructure above 3.00M Height including gable walls
930
6960120
7484
Flooring: Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.
1710
1046520
612
Flooring with cement concrete (1:5:10) Prop. Using 40 mm gauge HBG metal including cost and conveyance of all materials to site of work, labour charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and oprational charges of tools and plants required as directed by the officer incharge of work.
1600
7340800
4588
Flooring with cement concrete (1:2:4) Prop. 150mm thick using 20mm HBG metal and top smooth finished with cement mortar (1:3), 8mm thick including mixing charges, curing etc., complete.for finished item of work and as directed by the Officer incharge of work.
13100
14200400
1084
Providing seperation membrane of 125 micron sheet over to the plain cement concrete including cost, conveyance and placing in position complete as directed by the Engineer - in charge
10700
214000
20
Providing groove cutting in Construction Joints in CC pavement using Bitumen Sealant filter materialas per IRC : 58-1998 and IRC : 15-2002 including cost and conveyance of all materials and all labour charges complete for finished item of work as directed by the Engineer- In - Charge
4400
844800
192
Plastering 12mm thick single coat with cement mortar (1:4) Prop to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work for all heights.
9100
2111200
232
Plastering 20mm thick in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work. For basement
1700
481100
283
Plastering 12mm thick to Brick masonry in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work.
-
-
-
Upto 3.00 MT height
3050
582550
191
External Double Coat
3050
1296250
425
Above 3.00 MT height
4400
968000
220
External Double Coat
4400
1870000
425
White washing two coats to all the inside faces of the godown cost and conveyance of all materials to site of work such as lime, gum, conge water and labour charges etc., complete for finished item of work.
10600
413400
39
Supply and application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales and other taxes incidental, operational and all labour charges etc., complete for finished item of work in all floors.
15100
3231400
214
Manufacturing, supply and fixing in position of 0.75x0.75M size steel Air inlets with rolled steel angles having three frames. The outer side frame of 35x35x3mm M.S. angle welded with 12mm dia plain mild steel rods at 75mm C/C both the ways (9 Nos. on each side) with alternative joints welded and another frame of 0.75x0.75M which will be attached by the side of first frame, (made of 30x3mm flats two numbers) and 14/16 gauge of 20mm size Iron diamond mesh fixed in between two flats, drilling holes of suitable dia to first and second frame to fix with 20x6mm zinc bolts (8Nos.). The third frame is made of 25x25x3mm `z` angle/`T` angle including all accessories such as hold fasts, tower bolts, wind appliances rubber packing to glasses 4 pieces etc., which will be kept by the side of first frame i.e. inside the godown including cost of all materials required for the work labour charges including red oxide coating etc., complete for finished item of work as per the drawing and as directed by the officer in charge of work.
168
950208
5656
Manufacturing, supply and fixing in position of 1.50x0.45 M. size ventilators having three frames. The first frame of 35x35x3mm M.S. angle welded with two numbers of 12mm dia plain mild steel rods horizontally and second frame made of 30x30mm flats made of 1.50x0.45M. size with two numbers and 14/16 gauge of 20mm size Iron Diamond mesh fixed in second frame, drilling holes with suitable dia to first frame and second frame to be tightened with 20x6mm size zinc bolts (8 Nos.). The third frame made of two frames of 1.50x0.30m of 25x25x3mm ‘L’ angle with glazed (S&F of suitable size of 4mm thick of 4 pieces glasses for each ventilator) type frames and ‘T’ angle and jointing the two frames including cost of all materials required for the work labour charges, including red oxide coating etc., complete for finished item of work as per the drawing and as directed by the officer in charge of work.
216
995112
4607
Supply of steel including cutting, bending, cranking, tying grills and placing them in position including fabrication charges cost of materials and binding wire etc., complete for finished item of work complete. Over lapse will not measured seperately. Ribbed/ tor steel/ HYSD bars
236
20054572
84977
Painting two coats to new iron works with Synthetic enamel paint of British/Asian brand of approved colour without priming coat including cost and conveyance of all materials to site of work labour charges scaffolding etc., complete for finished item of work as directed by the officer in charge of work.
3000
336000
112
Supply and fixing in position (inside the opening) Rolling shutters manufactured by reputed firms in manufacturing Rolling shutters with side guides of 2.44 M length and 12 gauge mild steel channels for a clear opening of 1.83x2.44 M of pull and push type of approved quality and design as per ISI specifications with guaranteed 18 gauge and 75 mm wide interlocking black steel of deep convex corrugation with 35 pieces bottom plate of 1.80 M. length of 12 gauge including pressed steel bottom rail brackets of 12 gauge including pressed steel bottom rail brackets of 12 gauge of 350mmx430mm size, suspension shaft at the top with rolling springs made of strong English/Swedish/German of 300mm of 3 gauge steel wire providing pulling hooks of 2 No. and locking arrangements including flat on both inside and outside of 50mm x 6 mm of size, 1.80 M. length and 12 gauge frame to the bottom plate including supply and fixing top cover of 20 gauge 1.80 M. length sheet of suitable shape and size one sharp coat of British/Asian red oxide primer for the entire shutter after approving the quality of shutter at the site of work with cover providing necessary clamps holdfasts, rivets, nuts and stoppers etc., including all other necessary fixtures grouting of the corners with CM (1:6) and greasing etc., complete for finished item of work as per the drawing enclosed and as directed in the officer incharge of the work.
48
786960
16395
Providing Collapsible gates: Supply and fixing in position of collapsible gates to be fixed outside the wall, manufactured by reputed firms of size 2.44 x 2.44 Mtrs. With double leaves as per ISI specifications and made with 4x20mm thick verticals 28 Nos. with 75mm gaps between verticals including superior quality of rollers of size 50 x 6 mm Mild steel flat with suitable holdfast 1” of it to be fixed in flooring concrete for smooth movement of Roller including cost of priming coat with British/Asian Red oxide primer after approval of the quality of the Gates etc., complete including cost of tools and plants and labour charges etc., complete for finished item of work
48
1176432
24509
Roofing with Color coated Galvalume sheet 0.5mm thick, width 1020mm, MPA:550, GSM:Z150 including sheet fixing charges, cost of screws Hilt/ Corroshield self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. Chaseling masonry should be done on one side including filling after insertion of sheet in the groove as directed by officer in charge of work. For Verandahs
3600
2012400
559
Supply, fabrication and installation of Self supported arch shaped GALVALUME sheet roofing 1.09mm total coated thickness (TCT) of Galvalume. Color coated Galvalume steel complying to ASTM A792, Base metal thickness 1.00mm (Tolerance as +/- 0.02mm), alloy coating AZ 150(Aluminum 55%, Zinc 43.4% and Silicon 1.6%), Yield strength: 350MPA as recommended in ASTM A792, Paint coating regular modified polyester top coat 25 microns and bottom coat 12 microns epoxy, top color: Combination of Blue and Off white and Bottom color grey using make of Thyssen Krupps, Germany/ Dongbu Steel Co. Limited, Korea/Corus Steels, U.K/ Union steel, Korea/Yieh phui Enterprises Ltd., Taiwan and Domestic market make of TATA Blue scope, Jindal Steel industries, Bhushan steels, JSW steel industry, Other Indian renowned steel industries etc. The Steel sheet shall be 3’-0” (914MM) width (Tolerance +/- 2.00 MM) which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2’-0” (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The installation should be done by mechanized methods. Vendor has to mobilize required number of Hydra for transportation of sheets and Cranes for the erection of Seamed Sheets and complete the entire work satisfactorily by using the fixtures like anchor fasteners, standard light hangers, etc., complete as per terms and conditions. The Specifications, design & drawings for the arch shaped roofing must be submitted to TSWC for approval before the installation of the sheets at site.
12675
22117875
1745
Supply and fixing of 160mm dia PVC pipe with 180mm dia L-bend including cost and conveyance of all materials and all labour charges for fixing etc., complete.
200
330400
1652
Supply and fixing of 2.65mt span Verandah truss using 48.3mm OD (M), 33.7mm OD (L) and 26.9mm OD(H) with a rise of 0.75mt c/c at wall end including cost and conveyance of all materials, all fabrication charges, redoxide painting, transportation to site etc., complete.
224
969248
4327
Supply and fixing of 15’-3” c/c (4.65M) long roof purlins made of 76.10mm OD (light) MS tubes including at eves and ridges with 6 mm thick cleats for fixing to trusses including labour charges, lift charges, etc complete as directed by the officer incharge of work
648
2630232
4059
Supply and fixing of 1’-0” (0.30M) long roof purlins made of 76.10mm OD (light) MS tubes with 6 mm thick cleats for fixing to trusses including red oxide coating etc., complete and as per the drawing enclosed for verandah end purlins.
48
17712
369
Supply and fixing of expansion joint filler board conforming to IS: 1838 for buildings, columns, beams and slabs of 20 mm thick for RCC columns
100
40700
407
Supply and fixing of Lighter Brand water CO2 type "Fire extinguisher" 9lit capacity of ISI mark complete.
48
96000
2000
Letter writing charges to godowns, stack numbers, godown numbers on inside and out side at rolling shutter openings etc., including cost of synthetic enamel paint and artist charges etc., complete for 20000 MT godowns and including ancillary works as directed by the officer incharge of work.
2
30000
15000
Supply of Aluminum ladder of size 16 feet length while closing and 30 feet length while extended and made of Aluminum 'C' section of 3mm thick of all verticals and steps 1" dia 2mm aluminum tubes etc., complete with safety locks, rope, pulley, safety limit, rubber shoes, folding, platforms, safety rings, hand rails fitted to extended section 2Nos 8" dia teflon wheels fixed for sliding etc., complete
4
128000
32000
Manufacturing, Supply & fixing of 2.45 x 1.20m main name board including artist charges, cost of paints including cost and conveyance of all materials and fixing charges etc., complete
1
12398
12398
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.)
4.05
360445
88999
Earth work excavation for Levelling the ground in ordinary gravel soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
68566
7816524
114
Loading and unloading of stone boulder / stone aggregates / sand / kanker / moorum. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip)
31646
6550722
207
Excavation for roadway in hard rock with controlled blasting by drilling, blasting and breaking, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections, loading and disposal of cut road with in all lifts and leads upto 1000 metres
10548
5263452
499
Manufacturing, Supply and fixing of a combination of Turbo Ventilator Aluminum) of Size 24 inches, Capacity 2200 CFM, with a Ventilight to provide daylight along with air ventilation of 2mm Thick Polycarbonate sheet of size 3'6"FtX 7' 8"Ft, to be installed at a distance of every 23 FT along the length of the building.
72
3240000
45000
Electrification to 20,000 M.T. godown at TSWC Borigaon:
-
-
-
Supply and Fixing of 25mm dia 2.2 mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.
1400
159600
114
Supply and Fixing of 25mm dia 1.8mm thick surface P.V.C. pipe of make Sudhakar/ Modi/ Atu (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.
480
44640
93
Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for mains inlcuding all labour charges etc., complete.
1960
98000
50
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for mains inlcuding all labour charges etc., complete.
3380
321100
95
Wiring with 2 runs (excluding cost of wire) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch of make Anchor/ Gold medal Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete.
200
72000
360
Supply and Run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete.
20
300
15
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for earth continuity including all labour charges etc., complete.
3380
84500
25
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete of make GE/ Siemens/ ABB/ Hager/ GM/ Havels/ HPL.
48
6576
137
Supply and fixing of SPN Distribution board make of GE/ Siemens/ ABB/ GM/ Hager/ havels/ HPL with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges etc., complete.
4
18624
4656
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
8
24608
3076
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
200
139400
697
Supply & fixing of L-angle made in Y shape of 6’0’’ length to fix tube light on one end and another end fixed to electrical hangers, which fixed to sheeting including cost of all materials and fixing charges etc., complete.
96
38400
400
Supply and laying of 6 sqmm 2 core XLPE insulated 1100V grade armoured aluminium cable as per specification conforming to IS-7098 (part-I) of makes Polycab/ KEI/ RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
400
194800
487
Supply & Fixing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
400
136800
342
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes.
4
21128
5282
Office Building at TSWC Borigaon:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
90
31950
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work
20
91760
4588
Filling foundations and basement with randoum rubble masonry in cement mortar (1:6) prop. using hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads etc., complete.
45
219105
4869
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete
90
8910
99
Supply, collection and filling of gravel from approved quarry including cost, conveyance, consolidation, watering etc.,as directed by the officer in charge of work
60
28740
479
Vibrated reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, vibrating, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work
-
-
-
Footings
20
197820
9891
Plinth Beam of 0.23M x 0.30M size
6
79134
13189
Columns of 0.23M x 0.30M size
5
63545
12709
Roof Beam at Roof level
5
68590
13718
Reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work
-
-
-
For Lintels and Lofts over openings
5
67375
13475
Sunshades of 0.60mt wide 0.05mt thick
40
29520
738
Roof Slab 115MM thick & impervious coat 20mm thick in CM (1:3)
155
336815
2173
Waist Slab 115MM thick for stair case
15
32685
2179
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work For Bed Blocks
1
6920
6920
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsium of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.For superstructure upto 3.00M Height including gable walls.
50
337550
6751
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid , including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
100
117700
1177
Flooring with ceramic tiles of first quality over a bed of cement slurry of 12mm thick with C.M. (1:8) Prop. including skirting, curing, mixing of motor, labour charges for laying tiles etc., complete for finished item of work
40
34040
851
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work
250
50750
203
Plastering 20mm thick to basement in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
200
56600
283
Plastering 12mm thick to brick masonry in one coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
400
76400
191
Supply and application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales and other taxes incidental, operational and all labour charges etc., complete for finished item of work in all floors.
400
85600
214
Painting to new walls with two coats of water proof cement paint Asian/Nerolac/Berger etc., of approved brand and shade over a base coat of grade I of approved primer making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials to work site and conveyance of all materials to work site and all operational, incidental,labour charges etc., complete for finished item of work as per SS912 for external walls.
250
50000
200
Painting two coats with best synthetic enamel paint first grade of Asian/Nerolac/Berger etc., over a coat of wood primer including cost and conveyance of all materials to site of work, cost of priming coat, cost of brushes and all labour charges etc., complete for Doors and Windows.
100
18400
184
Supply of steel including cutting bending crancking and placing them in position tying grills including cost of steel binding wire, labour charges etc., complete for finished item of work as directed by the Officer incharge of the work.
-
-
-
Ribbed steel
7
594839
84977
MS and F of medium teakwood paneled double door of size 1.05x2.1mt using second class teakwood frame alround of size 100x75mm, shutter frame made of 32x75mm for verticals and top rail, 32x100mm for lock rail and bottom rail and 25mm thick planks inclduing cost and conveyance of wood, 5" ms powder coated hinges(6No), 6" ms powder coated towerbolts (4No), 9" ms Holdfasts(4No), 300mm long ms Locking arrangements (1No), 200mm long ms latch inside, 6" long ms door handles(2No), 2" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work. Doors
6
111648
18608
MS and F of medium teakwood paneled double door of size 0.9x2.1mt using second class teakwood frame alround of size 100x75mm, shutter frame made of 32x75mm for verticals and top rail, 32x100mm for lock rail and bottom rail and 25mm thick planks inclduing cost and conveyance of wood, 5" ms powder coated hinges (6No), 6" ms powder coated towerbolts(4No), 9" ms Holdfasts (4No), 300mm long ms Locking arrangements (1No), 200mm long ms latch inside, 6" long ms door handles (2No), 2" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work. Doors D1
2
34186
17093
MS and F of medium teakwood glazed (3No) window of size 1.5x1.25mt using second class teakwood frame alrond and middle 2nos mullins of size 75x75mm, 3Nos shutters frame made of 65x32mm for verticals and horizontals and 4mm thick plain glass and fixing wooden beading for shutters, suitable ms iron grill as approved including cost and conveyance of wood, 3" ms powder coated hinges (6No), 6" ms powder coated towerbolts (6No), 9" ms Holdfasts (4No), 300mm long aluminium window stays (3no), 4"long ms door handles (3No), 1" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work.Windows
8
134448
16806
Supply and fixing of readymade cement jali vetilators of size 0.45x0.30 of 25MM thick including cost and conveyance of materials and labour charges for fixing etc., complete. For Ventilators
12
1236
103
Supply and fixing of Indian water closet 575mm (23 inches)of size of Parry/Neycer/Hindustan company make and P or S trap with concrete and plastered with CM (1:4) prop 12mm thick etc including supply and fixing of flush tank (PVC ISI) with stop cock complete for finished item of work.
1
3044
3044
Supply, Installation and commissioning approved make floor mounted EWC (Suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wall flanges all of approved make etc., complete for finished item of work in all respects: White colour
1
12958
12958
Supply and fixing of TV shape mirror with plastic frame of size 609.6 x 457.2mm including labour charges for fixing etc., complete for finished item of work.
2
1186
593
Supplying & Fixing of Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with 19.05mm 400gms NP stop cock Indian make with ISI mark Seiko/Senior/Nice or equivalent parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock.
2
8514
4257
Supplying, laying, jointing and testing 110 mm Dia. PVC/SWR pipe 4Kg/cm2 of ISI make with airtight with cement solvent including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping.
10
4260
426
Supply and fixing of 100mm dia PVC ventilating shaft of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete Vetilator Pipe
1
1341
1341
Supply and fixing of 110mm dia PVC rain water pipe of 3M length including fixing of 100mm dia PVC Cowl in brick work etc. complete.
3
3957
1319
Supply and fixing of CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
4
3808
952
Supply and fixing of CP Short body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
2
1586
793
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 15.90mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS(copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water( IS15778-2007)with CPVC fittings including the cost of pipe & its fittings & labour charges complete For Internal toilets, wash basins etc.,
30
7860
262
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 28.60mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete from bore well to water tank and down take pipes etc.,
80
27760
347
Supplying & fixing of 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover
2
1652
826
Supplying & fixing of 101.6mm floor trap -UPVC/SWR pipe fixing with cement solvent as per site requirements with standard practice.
4
912
228
Supply & fixing of Bronze gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size.
2
3102
1551
Supply & fixing of Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size.
2
2732
1366
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank (sintex) with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.1000ltr water tank
1000
9000
9
Construction of septic tank of size 2.13 x 1.37 x 1.53 M brick in C.M. (1:6) of 0.22 M thick size and bottom C.C. (1:5:10) concrete average thickness of 0.30 M thick and top covered with RCC (1:1 1/2 :3) slab of 75 mm thick and inside plastering with C.M. (1:4) and construction of baffle wall etc. including earthwork excavation cost and conveyance of all materials required to the work, labour charges as per approved design drawing etc.,complete.
1
29029
29029
Construction of dispersion trench inclussive of excavation of dispersion trench of 1m x 1m x 1m length and filled with 40mm HBG metal and 20mm HBG metal and sand filled with excavated earth above ground level etc., complete and as directed by the officer incharge of work.Dispersion trench
1
1896
1896
Supply and fixing of 25.4 mm dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws
3
573
191
Supply and fixing of NP soap dish heavy type with NP SCREWS
3
1968
656
Applying Birla/ Asian wall care putty average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls and top painting with emulsion paint two coats of Asian brand of approved colour including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls .Plastering 12mm thick single coat with cement mortar(1:4) Prop. Plastering 12mm thick to Brick masonry in single coat with cement mortar(1:6) Prop.
650
157300
242
Electrification to Office Building at TSWC Borigaon:
-
-
-
Supply and Fixing of 25mm dia 2.2 mm thick PVC pipe of make Sudhakar/ Modi/ Atul (ISI MARK) concealed in Roof & wall with all required accessories including masonry work and labour charges etc., complete.
70
7140
102
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R flexible copper cable of makes KEI/Poly cab/ Gold medal/ Anchor/ Suncab (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light. (For Office Building)
29
13833
477
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
12
1644
137
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
6
2370
395
Supply and fixing of batten holder/slanting holder inlieu of ceiling rose of light point complete with all connections and all labour charges with bulb etc., complete for new installation.
7
686
98
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
50
4500
90
Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges etc., complete.
1
4656
4656
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
10
6970
697
Supply and erecting ceiling fan with 3 blades and double ball bearings and with condenser A.C.250V 50C/S of (48") 1200mm sweep completely errected in position with Resistance type regulator, canopy down rod upto 304.8 mm in length is provieded with hook/clamps nuts and bolts and 24/.2 flexible copper wire etc., complete and pointed with lettering by enamel paint the Sr. No and date of errection including cost and conveyance of all materials and labour charges
7
24654
3522
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes
1
5282
5282
Supply and laying of 10 sqmm 4 core XLPE insulated, 1100V grade armoured aluminium cable as per specification conforming to IS-7098 (part-I) of makes Polycab/ KEI/ RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
60
31260
521
Supply & Fixing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
60
32160
536
Supply and fixing of buzzer / Calling bell on 100 x 100 mm (4"x4") decolam block including giving connections, cost of all accessories and labour charges etc., complete.
1
218
218
Supply and Run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete.
20
300
15
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.
50
1150
23
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
4
12304
3076
Supply and fixing of special Teak wood metre box with hinged dooe and lock arrangements with 4"x4" glass for taking the reading duly polished with Touch wood exterior polish for housing single phase metre and fuse as suggested by T.S.Transco Authorities for finished item of work.
1
800
800
Supply and fixing of 12V, 150 AH MF battery including wireleads make Amar Raja(Power Zone) or Equivalent model of Exide including Supply and installation of 800 VA home UPS system pure sine wave out put, single phase input / Single phase output.
Makes: Servomax / Top Power / Amar Raja
1
22241
22241
Hamalies Parking Shed at TSWC Borigaon:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
65
23075
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work
40
183520
4588
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
65
6435
99
Supply, collection and filling gravel inside basement including cost and conveyance of all materials and labour charges for filling watering, consolidation with hand roller rolling etc., complete as directed by the officer incharge of work.
125
59875
479
Vibrated reinforced Cement Concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work , labour charges, centering, machine mixing, laying, vibrating, curing , all other incidental and operational charges etc., complete. For Footings of columns.
-
-
-
For Footings
8
79128
9891
For Columns
4
50836
12709
For Lintels and lofts Over Openings
0.5
6737
13475
For roof slab 115mm thick and impervious coat 20mm thick slab in CM (1:3)
22
47806
2173
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work, labour charges, centering, machine mixing, laying, curing , all other incidental and operational charges, labour charges etc.complete. For Bed Blocks
18
124560
6920
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
50
337550
6751
Plastering 12mm thick to Brick masonry in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including, all water leads machine mixing etc., complete for finished item of work
350
66850
191
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing, water leads, machine mixing etc., complete for finished item of work.
200
40600
203
Colour washing one coat over one coat of white wash to all outside faces including basement with approved colour including cost, conveyance of all materials to site of work such as lime, colour (yellow) gum, conge water, labour charges etc., complete for finished item of work.
350
21000
60
Painting two coats with synthetic enamel paint first grade of Asian / Nerolac / Berger etc., over a coat of primer including cost of primer and conveyance of all materials, labour charges etc., complete
50
9200
184
Supply of steel including cutting, bending, crancking and placing them in position tying grills including cost of steel, binding wire, labour charges etc., complete for finished item of work as directed by the Officer incharge of the work .
2
169954
84977
Supply & Fixing of main pipe of 4.65M length of 101.6mm OD (H) MS tubes including at eves and ridges with 6 mm thick cleats for fixing including red oxide coating etc., complete and as per the drawing enclosed for cycle shed.
7
59724
8532
Supply & Fixing of 15’-3” c/c (4.65M) long roof purlins made of 76.10mm OD (light) MS tubes including at eves and ridges with 6 mm thick cleats for fixing to trusses including red oxide coating etc., complete and as per the drawing enclosed for parking shed.
24
97416
4059
Roofing with Color coated Galvalume sheet 0.5mm thick, width 1020mm, MPA:550, GSM:AZ150 including sheet fixing charges, cost of screws Hilt/Corroshield self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. Chaseling masonry should be done on one side including filling after insertion of sheet in the groove as directed by officer in charge of work.
160
89440
559
Supply and fixing of glazed Indian water closet 575mm (23 inches) in size of Parry company make and P or S trap and a pair of footrests set in cement mortar and based with concrete and plastered with CM (1:4) prop 12mm thick etc complete for finished item of work
2
6088
3044
Supplying, laying, jointing and testing 110 mm Dia. PVC/SWR pipe 4Kg/cm2 of ISI make with airtight with cement solvent including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping.
6
2556
426
Supply and fixing of 100mm dia PVC ventilating shaft of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete.
2
2682
1341
Supply and fixing CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
6
5712
952
Supply and fixing CP Short body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
2
1586
793
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 15.90mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete
20
5240
262
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 28.60mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete
100
34700
347
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with PVC Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover.
1
826
826
Supplying & fixing 101.6mm floor trap - UPVC pipe fixing with cement solvent as per site requirements with standard practice.
3
684
228
Supply & fixing of Bronze gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size.
2
3102
1551
Supply & fixing of Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size.
2
2732
1366
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1000
9000
9
Construction of septic tank of size 2.13 x 1.37 x 1.53 M brick in C.M. (1:6) of 0.22 M thick size and bottom C.C. (1:5:10) concrete average thickness of 0.30 M thick and top covered with RCC slab and inside plastering with C.M. (1:4) and construction of baffle wall etc. including earthwork excavation cost and conveyance of all materials required to the work, labour charges as per approved design drawing etc.,complete.
1
29029
29029
Construction of dispersion trench inclussive of excavation of dispersion trench of 1m x 1m x 1m length and filled with 40mm HBG metal and 20mm HBG metal and sand filled with excavated earth above ground level etc., complete and as directed by the officer incharge of work
1
1896
1896
Manufacturing supply and fixing in position of 0.90 x 1.98Mts. Size steel doors with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements and labour charges etc., complete for finished item of work.
2
17564
8782
Flooring with ceramic tiles of first quality over a bed of cement slurry of 12mm thick with C.M. (1:8) Prop. including skirting, curing, mixing of motor, labour charges for laying tiles etc., complete for finished item of work.
25
21275
851
INTERNAL ROADS AT TSWC BORIGAON:
-
-
-
Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.
1760
1077120
612
Providing, laying, spreading and compacting stone aggregates of 63 mm nominal single size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 MORD.
1720
3720360
2163
Providing, laying, spreading and compacting stone aggregates of 40 mm Single nominal size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 MORD.
865
2146065
2481
Weigh Bridge foundation at TSWC Borigaon:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
40
14200
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work.
40
183520
4588
Reinforced Cement Concrete(1:1 1/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Columns
15
190635
12709
Beams
8
109744
13718
Bed blocks for ramps
20
138400
6920
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work.Platforms
60
12180
203
Supply and fixing of Kerb 'L'angle of size 65x65x6mm including labour charges and as directed by the officer incharge of work.
15
12450
830
Supply and fixing of M.S flat of size 120x50x10mm including cost and conveyance, welding charges etc., complete and as directed by the officer incharge of work.
12
1284
107
Supply and fixing of Copper flat of size 20x2mm including cost and conveyance, welding charges etc., complete and as directed by the officer incharge of work.
25
20325
813
Supply of Ribbed steel including cutting, bending, cranking, tying grills and placing them in position including fabrication charges cost of materials and binding wire etc., complete for finished item of work. for columns, plinth beam, Tie beam, including overlaps and wastage etc., complete. Ribbed steel
0.93
79028
84977
Collection,supply and filling of carted gravel in trenches from approved quarry including cost, conveyance of gravel watering, consolidation with hand roller etc., complete.
30
14370
479
Filling with excavated soils including initial lead and lifts, ramming consolidation etc., complete and as directed by the officer incharge of work.
40
3960
99
Construction of Cabin Room at TSWC Borigaon :
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water etc., complete for finished item of work.
15
5325
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work.
4
18352
4588
Supply, collection and filling gravel inside basement including cost and conveyance of all materials and labour charges for filling watering, consolidation with hand roller rolling etc., complete as directed by the officer incharge of work.
15
7185
479
Filling foundations and basement with random rubble masonry in cement mortar (1:6) prop. using hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads etc., complete for finished item of work
10
48690
4869
Reinforced Cement Concrete (1:1 1/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Columns
5
63545
12709
For Beams- Plinth beam & Roof beam
3
41154
13718
For Bed blocks
0.15
1038
6920
For Sun shades 0.60M wide
7
5166
738
For Roof slab 115mm thick & Impervious coat of 20 mm thick in CM (1:6) prop.
25
54325
2173
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
15
101265
6751
Plastering 12mm thick to fly ash cement Brick masonry in one coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads, mixing of mortar etc., complete for finished item of work
150
28650
191
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads mixing of mortar etc., complete for finished item of work.
50
10150
203
Painting to new walls with two coats of water proof cement paint of Asian/Nerolac/Berger etc.approved brand and shade over a base coat of grade I of approved primer making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials to work site and conveyance of all materials to work site and all operational, incidental,labour charges etc., complete for finished item of work as per SS912 for External walls
80
16000
200
Oil bound distemper two coats over a oil base primer coat of Asian/ Nerolac/ Berger etc., approved colour for interior walls including cost and conveyance of all materials to site of work and all labour charges etc., complete.
70
7910
113
Painting two coats with best synthetic enamel paint first grade of Asian/Nerolac/Berger etc., without priming coat including cost and conveyance of all materials to site of work, cost of brushes and all labour charges etc., complete.
20
2440
122
Supply of Ribbed steel, wrought and put up for fabrication of steel including cost and conveyance of all materials to site of work. Cutting, bending, cranking, tying grills and placing them in position including cost of steel & binding wire, including overlaps and wastage etc., complete. Over laps will not be measured seperately.
1
84977
84977
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation etc., complete.
15
1485
99
Manufacturing supply and fixing in position of 0.90 x 1.98Mts. Size steel doors with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements and labour charges etc., complete for finished item of work for Doors of size 0.90x1.98mt.
1
8782
8782
Manufacturing supply and fixing in position of 0.90 x 1.20Mts. Size steel Windows with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and welding of 12mm square rods at suitable intervals and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements etc., complete including cost and conveyance of all accessories such as hold fasts, tower bolts locking arrangements etc., complete including cost and conveyance of all materials to site of work labour charges complete for finished item of work for windows of size 0.90x1.20mt
4
26092
6523
Supply and fixing of 110mm dia PVC rain water pipe of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete.
1
1319
1319
Flooring with CC (1:2:4) prop. of 75mm thick and top finishing with plastering 8mm thick in CM(1:3) prop including cost and conveyance of all materials and labour charges for laying etc., complete for finished item of work
15
10215
681
ELECTRIFICATION TO WEIGHBRIDGE AND CABIN ROOM AT TSWC BORIGAON:
-
-
-
Supply and fixing of 25mm dia 2.2 mm thick PVC conduit pipe conceled in wall with all accessories including chiselling the wall whereever necessary including masonry work for light/ fan point and separate plug point including all labour charges etc., complete
10
1020
102
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) in the existing pipe with 6A switch, ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell & exhaust fan points in Non-residential Buildings except circuit mains excluding cost of wire
4
1908
477
Supply and fixing of 6A 3 pin flush type wall plug socket with 6A flush type marked switch control on a common board with earth continuity including wire Leeds earth connections along with all labour charges etc., complete excluding cost of wire
8
1096
137
Supply and fixing of 16A 3pin and 6A 3pin flush type plug socket with indicator lamp and 16A switch control (5 in one) duly recessed in wall with T.W deep box of 6" x 8" x 2 1/2" size covered with 3mm thick hylam sheet including earth connections and all labour charges etc., complete.
4
1580
395
Supply and fixing of batten holder/slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with bulb etc., complete for new installation.
1
98
98
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) PVC insulated flexible copper cable in existing metallic/non metallic conduit pipe for runs of mains including labour charges etc., complete.
20
1800
90
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
2
1394
697
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
2
6152
3076
Supply and erecting ceiling fan with 3 blades and double ball bearings and with condenser A.C 250V 50C/V of (48") 1200mm sweep completely erected in position with Resistance type regulator, canopy down rod up to 304.8mm in length is provided with hook/clamps nuts and bolts and 24/0.2 flexible copper wire etc., complete and pointed with lettering by enamel paint the Sl.No and date of erection including cost and conveyance of all materials and labour charges
1
3522
3522
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 meters length with necessary accessories with hume pipe ring duly providing staggered holes and required bolts, nuts and washers, checknuts hume pipe ring etc as per IS specifications with necessary double G.I earth wire No.8 SWG including filling with equal pro. of salt and charcoal in layers and all labour charges ete., complete.
2
10564
5282
Supply and laying of 6 sqmm 2 core XLPE insulated, 1100V grade armoured aluminium cable as per specification conforming to IS-7098(part-I) of makes Polycab/ KEI/RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
120
58440
487
Supply & Fixing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
120
41040
342
Supply and run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete
10
150
15
Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) FR PVC insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete
20
460
23
Construction of Compound Wall at TSWC Borigaon:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
490
173950
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work
90
412920
4588
Filling foundations and basement with random rubble masonry in cement mortar (1:6) prop. using hard variety of hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads fixing of bond stones for each layer, machine mixing of mortar etc., complete for finished item of work
1200
5842800
4869
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
490
48510
99
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
400
2700400
6751
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., for the following items and as directed by the officer in charge of work.
3
20760
6920
Supply and fixing of G.I. barbed wire of 12/14 gauge 2 rows, four knots, tightening the same including cost and conveyance of all materials, binding wire etc. complete for finished item of work.
2900
63800
22
Supply and fixing of L-angle of size 35 x 35 x 6mm and length of 1.00M including cutting, bending, welding hooks for fixing of barbed wire etc., complete for finished item of work and as directed by the officer in charge of work. For Fencing poles
330
114510
347
Plastering 12mm thick single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work
3400
649400
191
Plastering 20mm thick to RR masonry in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
1640
464120
283
Colour washing one coat over one coat of white wash to all outside faces including basement with approved colour including cost, conveyance of all materials to site of work such as lime, colour (yellow/black oxide) gum, conge water, labour charges etc., complete for finished item of work as directed by the officer in charge of work.
5040
302400
60
Construction of main gate pillars of size 0.45 x 0.45 x 2.55M of RCC (1:1 1/2:3) prop exvating the pit of size 1.20 x 1.20 x 1.05M filling with CC (1:5:10) of 0.15M depth and balance filled with CC (1:11/2:3) prop including ribbed and mild steel as per drawings enclosed and plastering with 12mm thick in CM(1:4) prop and painting with cement paint etc., complete for RCC pillars for fixing main gate.
2
37916
18958
Manufacturing, supply & fixing Main gate of size: 8.00 x1.98M with outer frame of rectangular pipe of size:3"x1.5" of 14 gauge & middle horizontal square pipes of size:1.5"x1.5" of 14 gauge and internal vertical square pipes of size:1.25"x1.25" of 14 gauge and providing profolated sheet of 20 gauge in middle of 0.60M height including cost of hold fasts, locking arrangements including painting one primer coat of red oxide paint including cost and conveyance of all materials etc., complete as per drawing enclosed and as directed by the officer incharge of work.
1
65643
65643
Manufacturing, supply & fixing Wicket gate of size: 1.05 x1.98M with outer frame of rectangular pipe of size: 3"x1.5" of 14 gauge& middle horizontal square pipes of size: 1.5"x1.5" of 14 gauge and internal vertical square pipes of size: 1.25"x1.25" of 14 gauge and providing profolated sheet of 20 gauge in middle of 0.60M height including cost of hold fasts, locking arrangements including painting with one primer coat of red oxide paint including cost and conveyance of all materials etc., complete as per drawing enclosed and as directed by the officer incharge of work.
1
3901
3901
Construction of RCC slab culvert 1V OF 2.0M span at TSWC Borigaon:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item work.
72.1
25595
355
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labour charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required etc., complete for finished item of work
7
32116
4588
Providing VCC M20 using nominal mix in foundation using HBG (SS 5) graded machine crushing metal for finished item of work in foundation and compacted by vibration including curing (Below sill level)
37.5
277200
7392
Providing VCC M20 using nominal mix in foundation using HBG (SS 5) graded machine crushing metal for finished item of work in foundation and compacted by vibration including curing (Above sill level)
63
465696
7392
VRCC M20 mix with stone aggregate 20mm nominal size mechanically mixed, placed and vibrated for concrete work for sub structure excluding steel reinforcement but including centering and shuttering laid in position as per MORTH specification 1000/1700 for bed blocks and backing walls
7.7
97859
12709
VRCC M20 mix with stone aggregate 20mm nominal size mechanically mixed, placed and vibrated for concrete work for super structure excluding steel reinforcement but including centering and shuttering laid in position as per MORTH specification 1000/1700 for Deck slab
4
50836
12709
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in sub structure for Bed blocks and Backing walls complete as per Drawing and Technical Specifications.
0.31
26342
84977
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in super structure for Deck slab complete as per Drawing and Technical Specifications.
1.6
135963
84977
DRILLING OF 61/2'' DIA BOREWELL AT TSWC BORIGAON:-
-
-
-
Drilling of 6.5” dia Bore well with Rotary type including yield test and labour charges etc., complete and providing not less than 200mm including insertion of 175mm dia PVC casing pipe with coupling, any other relevant material required up to depth as directed by the officer in charge of work and transportation of brick including development, flushing with bore well at pressure of 7kg per Sq. cm. Conducting yield test crew charges, cost of all material required for fixing of pipes excluding cost of casing pipe, coupling and caps.
150
46050
307
Supply and fixing of blue casing pipe of 175mm dia complete and as directed by the officer incharge of work and labour charges etc., complete
48
50400
1050
Supply and fixing of dummy casing pipe of 175mm dia and labour charges etc., complete and as directed by the officer incharge of work
1
650
650
Supply and fixing of 175mm dia clamp set complete and labour charges etc., complete and as directed by the officer incharge of work
1
450
450
Supply and fixing of 2HP/25 stage submersible motor and pump sets including starter and electrical wiring etc., and as directed by the officer incharge of work
1
31386
31386
Supply and Transportation of outer dia of 50mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN-500 86/IS 14930 part-II. Makes: DURA LINE (Dura Guard)/ Bajaj/ Gamson/ Ultra Plus
100
10600
106
Supply and fixing of Tap valve and labour charges etc., complete and as directed by the officer incharge of work.
2
360
180
Testing charges for laying bore well points
2
2000
1000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements