State Warehousing Corporation Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 16,28,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
188509Bid Award Id
ViewTender No
0032/07/TSWC/Const/2020-21Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Filling foundations and basement with random rubble masonry in cement mortar (1:6) prop. using hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads fixing of bond stones for each layer, machine mixing of mortar etc., complete for finished item of work
1550
7114500
4590
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
4500
459000
102
Supply, collection and filling of gravel from approved quarry including cost, conveyance, consolidation, watering etc.,as directed by the officer in charge of work
21000
9870000
470
Vibrated reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, vibrating, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Footings
880
8264080
9391
For Columns
620
7996140
12897
For Plinth beam of 0.3MT wide & 0.3MT depth
180
2144880
11916
For Tie Beam @ 0.23MT wide & 0.45MT depth
200
2386600
11933
For Roof Beam @ 0.34MT wide & 0.45MT depth
330
4046790
12263
For Ridge Beam @ 0.23MT wide & 0.45MT depth
30
372840
12428
For Gutter slab 125mm thick & Impervious coat of 20 mm thick in CM (1:3) prop at 5.05 MT level from floor level
1300
3153800
2426
Reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for thec following items and as directed by the officer in charge of work.
-
-
-
For Plinth beam 0.10m depth
100
1191600
11916
For Lintels over Openings
52
646828
12439
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., for the following items and as directed by the officer in charge of work. For Bed Blocks
1.5
9784
6523
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
-
-
-
For superstructure upto 3.00M Height
950
5838700
6146
For superstructure above 3.00M Height including gable walls
1300
8862100
6817
Flooring: Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.
2500
1427500
571
Providing, laying, spreading and compacting stone aggregates (Grade-II) using 63mm to 40mm HBG metal to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials such as 12.5mm nominal size and gravel to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 MORD / 404 MORTH. For compacted thickness of 75 mm.
2500
6957500
2783
Providing, laying, spreading and compacting stone aggregates (Grade-III) using 53mm to 22.4mm HBG metal to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials such as 12.5mm nominal size /stone dust to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 MORD/ 404 MORTH. For compacted thickness of 75 mm.
1250
3958750
3167
Flooring with cement concrete (1:2:4) Prop. 50mm thick using 20mm HBG metal and top smooth finished with cement mortar (1:3), 8mm thick including mixing charges, curing etc., complete for finished item of work and as directed by the Officer incharge of work.
20000
8200000
410
Supply and fixing of glass pieces of size 50x4 mm thick including cost and conveyance of material, labour charges for fixing etc., complete.
9700
339500
35
Plastering 12mm thick single coat with cement mortar (1:4) Prop to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work for all heights.
12000
2568000
214
Plastering 20mm thick in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work. For basement
2300
600300
261
Plastering 12mm thick to Brick masnory in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work.
-
-
-
Upto 3.00 MT height
8700
1513800
174
Above 3.00 MT height
12200
2476600
203
White washing two coats to all the inside faces of the godown cost and conveyance of all materials to site of work such as lime, gum, conge water and labour charges etc., complete for finished item of work.
14600
613200
42
Supply and application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales and other taxes incidental, operational and all labour charges etc., complete for finished item of work in all floors.
20600
4717400
229
Manufacturing, supply and fixing in position of 0.75x0.75M size steel Air inlets with rolled steel angles having three frames. The outer side frame of 35x35x3mm M.S. angle welded with 12mm dia plain mild steel rods at 75mm C/C both the ways (9 Nos. on each side) with alternative joints welded and another frame of 0.75x0.75M which will be attached by the side of first frame, (made of 30x3mm flats two numbers) and 14/16 gauge of 20mm size Iron diamond mesh fixed in between two flats, drilling holes of suitable dia to first and second frame to fix with 20x6mm zinc bolts (8Nos.). The third frame is made of 25x25x3mm `z` angle/`T` angle including all accessories such as hold fasts, tower bolts, wind appliances rubber packing to glasses 4 pieces etc., which will be kept by the side of first frame i.e. inside the godown including cost of all materials required for the work labour charges including red oxide coating etc., complete for finished item of work as per the drawing and as directed by the officer in charge of work.
240
1197840
4991
Manufacturing, supply and fixing in position of 1.50x0.45 M. size ventilators having three frames. The first frame of 35x35x3mm M.S. angle welded with two numbers of 12mm dia plain mild steel rods horizontally and second frame made of 30x30mm flats made of 1.50x0.45M. size with two numbers and 14/16 gauge of 20mm size Iron Diamond mesh fixed in second frame, drilling holes with suitable dia to first frame and second frame to be tightened with 20x6mm size zinc bolts (8 Nos.). The third frame made of two frames of 1.50x0.30m of 25x25x3mm ‘L’ angle with glazed (S&F of suitable size of 4mm thick of 4 pieces glasses for each ventilator) type frames and ‘T’ angle and jointing the two frames including cost of all materials required for the work labour charges, including red oxide coating etc., complete for finished item of work as per the drawing and as directed by the officer in charge of work.
330
1323960
4012
Supply of steel including cutting, bending, cranking, tying grills and placing them in position including fabrication charges cost of materials and binding wire etc., complete for finished item of work complete. Over lapse will not measured seperately. Ribbed/ tor steel/ HYSD bars
322
20049652
62266
Painting two coats to new iron works with Synthetic enamel paint of British/Asian brand of approved colour without priming coat including cost and conveyance of all materials to site of work labour charges scaffolding etc., complete for finished item of work as directed by the officer in charge of work.
4500
535500
119
Supply and fixing in position (inside the opening) Rolling shutters manufactured by reputed firms in manufacturing Rolling shutters with side guides of 2.44 M length and 12 gauge mild steel channels for a clear opening of 1.83x2.44 M of pull and push type of approved quality and design as per ISI specifications with guaranteed 18 gauge and 75 mm wide interlocking black steel of deep convex corrugation with 35 pieces bottom plate of 1.80 M. length of 12 gauge including pressed steel bottom rail brackets of 12 gauge including pressed steel bottom rail brackets of 12 gauge of 350mmx430mm size, suspension shaft at the top with rolling springs made of strong English/Swedish/German of 300mm of 3 gauge steel wire providing pulling hooks of 2 No. and locking arrangements including flat on both inside and outside of 50mm x 6 mm of size, 1.80 M. length and 12 gauge frame to the bottom plate including supply and fixing top cover of 20 gauge 1.80 M. length sheet of suitable shape and size one sharp coat of British/Asian red oxide primer for the entire shutter after approving the quality of shutter at the site of work with cover providing necessary clamps holdfasts, rivets, nuts and stoppers etc., including all other necessary fixtures grouting of the corners with CM (1:6) and greasing etc., complete for finished item of work as per the drawing enclosed and as directed in the officer incharge of the work.
90
1362870
15143
Providing Collapsible gates: Supply and fixing in position of collapsible gates to be fixed outside the wall, manufactured by reputed firms of size 2.44 x 2.44 Mtrs. With double leaves as per ISI specifications and made with 4x20mm thick verticals 28 Nos. with 75mm gaps between verticals including superior quality of rollers of size 50 x 6 mm Mild steel flat with suitable holdfast 1” of it to be fixed in flooring concrete for smooth movement of Roller including cost of priming coat with British/Asian Red oxide primer after approval of the quality of the Gates etc., complete including cost of tools and plants and labour charges etc., complete for finished item of work
90
1937880
21532
Roofing with Color coated Galvalume sheet 0.5mm thick, width 1020mm, MPA:550, GSM:Z150 including sheet fixing charges, cost of screws Hilt/ Corroshield self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. Chaseling masonry should be done on one side including filling after insertion of sheet in the groove as directed by officer in charge of work. For Verandahs
5200
2948400
567
Supply and fixing of 160mm dia PVC pipe with 180mm dia L-bend including cost and conveyance of all materials and all labour charges for fixing etc., complete.
300
474300
1581
Supply and fixing of 2.65mt span Verandah truss using 48.3mm OD (M), 33.7mm OD (L) and 26.9mm OD(H) with a rise of 0.75mt c/c at wall end including cost and conveyance of all materials, all fabrication charges, redoxide painting, transportation to site etc., complete.
340
1445000
4250
Supply and fixing of 15’-3” c/c (4.65M) long roof purlins made of 76.10mm OD (light) MS tubes including at eves and ridges with 6 mm thick cleats for fixing to trusses including labour charges, lift charges, etc complete as directed by the officer incharge of work
990
3999600
4040
Supply and fixing of 1’-0” (0.30M) long roof purlins made of 76.10mm OD (light) MS tubes with 6 mm thick cleats for fixing to trusses including red oxide coating etc., complete and as per the drawing enclosed for verandah end purlins.
60
21360
356
Supply and fixing of expansion joint filler board conforming to IS: 1838 for buildings, columns, beams and slabs of 20 mm thick for RCC columns
120
48240
402
Supply and fixing of Lighter Brand water CO2 type "Fire extinguisher" 9lit capacity of ISI mark complete.
90
180000
2000
Letter writing charges to godowns, stack numbers, godown numbers on inside and out side at rolling shutter openings etc., including cost of synthetic enamel paint and artist charges etc., complete for 30000 MT godowns and including ancillary works as directed by the officer incharge of work.
1
30000
30000
Supply of Aluminum ladder of size 16 feet length while closing and 30 feet length while extended and made of Aluminum 'C' section of 3mm thick of all verticals and steps 1" dia 2mm aluminum tubes etc., complete with safety locks, rope, pulley, safety limit, rubber shoes, folding, platforms, safety rings, hand rails fitted to extended section 2Nos 8" dia teflon wheels fixed for sliding etc., complete
1
32000
32000
Manufacturing, Supply & fixing of 2.45 x 1.20m main name board including artist charges, cost of paints including cost and conveyance of all materials and fixing charges etc., complete
1
10507
10507
Removing Juliflora trees, uprooting and clearing from the site by using JCB as directed by the officer incharge of work in hours
60
60000
1000
Electrification to 30,000 MT (5x6000 MT) godowns:
-
-
-
Supply and Fixing of 25mm dia 2.2 mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.
2200
255200
116
Supply and Fixing of 25mm dia 1.8mm thick surface P.V.C. pipe of make Sudhakar/ Modi/ Atu (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.
900
84600
94
Supply and run of 2 of 14/0.3mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for mains inlcuding all labour charges etc., complete.
3700
188700
51
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for mains inlcuding all labour charges etc., complete.
6400
531200
83
Wiring with 2 runs (excluding cost of wire) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch of make Anchor/ Gold medal Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete.
430
160820
374
Supply and Run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete.
50
800
16
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable of makes KEI/ Poly cab/ Gold medal/ Anchor/ Suncab in existing pipe for earth continuity including all labour charges etc., complete.
6400
166400
26
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete of make GE/ Siemens/ ABB/ Hager/ GM/ Havels/ HPL.
180
25200
140
Supply and fixing of SPN Distribution board make of GE/ Siemens/ ABB/ GM/ Hager/ havels/ HPL with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges etc., complete.
5
20820
4164
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
10
30490
3049
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
420
301560
718
Supply & fixing of L-angle made in Y shape of 6’0’’ length to fix tube light on one end and another end fixed to electrical hangers, which fixed to sheeting including cost of all materials and fixing charges etc., complete.
180
72000
400
Supply and laying of 6 sqmm 2 core XLPE insulated 1100V grade armoured aluminium cable as per specification conforming to IS-7098 (part-I) of makes Polycab/ KEI/ RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
560
206080
368
Supply & Fixing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
560
171360
306
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes.
5
23600
4720
Office Building:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
75
26925
359
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work
20
87600
4380
Filling foundations and basement with random rubble masonry in cement mortar (1:6) prop. using hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads etc., complete.
45
206550
4590
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete
75
7650
102
Supply, collection and filling of gravel from approved quarry including cost, conveyance, consolidation, watering etc.,as directed by the officer in charge of work
60
28200
470
Vibrated reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, vibrating, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work
-
-
-
Footings
20
187820
9391
Plinth Beam of 0.23M x 0.30M size
6
71496
11916
Columns of 0.23M x 0.30M size
5
62180
12436
Roof Beam at Roof level
5
59665
11933
Reinforced Cement concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work
-
-
-
For Lintels and Lofts over openings
5
62195
12439
Sunshades of 0.60mt wide 0.05mt thick
40
25440
636
Roof Slab 115MM thick & impervious coat 20mm thick in CM (1:3)
155
284425
1835
Waist Slab 115MM thick for stair case
15
19680
1312
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work. For Bed Blocks
1
6523
6523
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure. For superstructure upto 3.00M Height including gable walls.
50
307300
6146
Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
90
103590
1151
Flooring with ceramic tiles of first quality over a bed of cement slurry of 12mm thick with C.M. (1:8) Prop. including skirting, curing, mixing of motor, labour charges for laying tiles etc., complete for finished item of work
40
33760
844
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work
250
46250
185
Plastering 20mm thick to basement in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
200
52200
261
Plastering 12mm thick to brick masonry in one coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
400
69600
174
Supply and application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales and other taxes incidental, operational and all labour charges etc., complete for finished item of work in all floors.
400
91600
229
Painting to new walls with two coats of water proof cement paint Asian/Nerolac/Berger etc., of approved brand and shade over a base coat of grade I of approved primer making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials to work site and conveyance of all materials to work site and all operational, incidental,labour charges etc., complete for finished item of work as per SS912 for external walls.
300
63900
213
Painting two coats with best synthetic enamel paint first grade of Asian/Nerolac/Berger etc., over a coat of wood primer including cost and conveyance of all materials to site of work, cost of priming coat, cost of brushes and all labour charges etc., complete. For Doors and Windows.
100
19600
196
Supply of steel including cutting bending crancking and placing them in position tying grills including cost of steel binding wire, labour charges etc., complete for finished item of work as directed by the Officer incharge of the work.
-
-
-
Ribbed steel
7
435862
62266
MS and F of medium teakwood paneled double door of size 1.05x2.1mt using second class teakwood frame alround of size 100x75mm, shutter frame made of 32x75mm for verticals and top rail, 32x100mm for lock rail and bottom rail and 25mm thick planks inclduing cost and conveyance of wood, 5" ms powder coated hinges (6No), 6" ms powder coated towerbolts (4No), 9" ms Holdfasts (4No), 300mm long ms Locking arrangements (1No), 200mm long ms latch inside, 6" long ms door handles (2No), 2" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work. Doors
6
110598
18433
MS and F of medium teakwood paneled double door of size 0.9x2.1mt using second class teakwood frame alround of size 100x75mm, shutter frame made of 32x75mm for verticals and top rail, 32x100mm for lock rail and bottom rail and 25mm thick planks inclduing cost and conveyance of wood, 5" ms powder coated hinges (6No), 6" ms powder coated towerbolts(4No), 9" ms Holdfasts (4No), 300mm long ms Locking arrangements (1No), 200mm long ms latch inside, 6" long ms door handles (2No), 2" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work. Doors D1
2
33910
16955
MS and F of medium teakwood glazed (3No) window of size 1.5x1.25mt using second class teakwood frame alrond and middle 2nos mullins of size 75x75mm, 3Nos shutters frame made of 65x32mm for verticals and horizontals and 4mm thick plain glass and fixing wooden beading for shutters, suitable ms iron grill as approved including cost and conveyance of wood, 3" ms powder coated hinges (6No), 6" ms powder coated towerbolts (6No), 9" ms Holdfasts (4No), 300mm long aluminium window stays (3no), 4"long ms door handles (3No), 1" rubber bushes (2No) as per the specification and drawing and as directed by the Officer incharge of work.Windows
8
127888
15986
Supply and fixing of readymade cement jali vetilators of size 0.45x0.30 of 25MM thick including cost and conveyance of materials and labour charges for fixing etc., complete. For Ventilators
12
1236
103
Supply and fixing of Indian water closet 575mm (23 inches)of size of Parry/Neycer/Hindustan company make and P or S trap with concrete and plastered with CM (1:4) prop 12mm thick etc including supply and fixing of flush tank (PVC ISI) with stop cock complete for finished item of work.
1
2257
2257
Supply, Installation and commissioning approved make floor mounted EWC (Suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450mm long PVC inter connection pipe wall flanges all of approved make etc., complete for finished item of work in all respects: White colour
1
9530
9530
Supply and fixing of TV shape mirror with plastic frame of size 609.6 x 457.2mm including labour charges for fixing etc., complete for finished item of work.
2
1064
532
Supplying & Fixing of Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with 19.05mm 400gms NP stop cock Indian make with ISI mark Seiko/Senior/Nice or equivalent parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock.
2
6954
3477
Supplying, laying, jointing and testing 110 mm Dia. PVC/SWR pipe 4Kg/cm2 of ISI make with airtight with cement solvent including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping.
10
4130
413
Supply and fixing of 100mm dia PVC ventilating shaft of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete Vetilator Pipe
1
1216
1216
Supply and fixing of 110mm dia PVC rain water pipe of 3M length including fixing of 100mm dia PVC Cowl in brick work etc. complete.
3
3594
1198
Supply and fixing of CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
4
3460
865
Supply and fixing of CP Short body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
2
1442
721
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 15.90mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete For Internal toilets, wash basins etc.,
30
7650
255
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 28.60mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete. From bore well to water tank and down take pipes etc.,
80
26320
329
Supplying & fixing of 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover
2
1498
749
Supplying & fixing of 101.6mm floor trap -UPVC/SWR pipe fixing with cement solvent as per site requirements with standard practice.
4
896
224
Supply & fixing of Bronze gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size.
2
2838
1419
Supply & fixing of Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size.
2
2504
1252
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank (sintex) with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks. 1000ltr water tank
1000
8000
8
Construction of septic tank of size 2.13 x 1.37 x 1.53 M brick in C.M. (1:6) of 0.22 M thick size and bottom C.C. (1:5:10) concrete average thickness of 0.30 M thick and top covered with RCC (1:1 1/2 :3) slab of 75 mm thick and inside plastering with C.M. (1:4) and construction of baffle wall etc. including earthwork excavation cost and conveyance of all materials required to the work, labour charges as per approved design drawing etc.,complete.
1
25221
25221
Construction of dispersion trench inclusive of excavation of dispersion trench of 1m x 1m x 1m length and filled with 40mm HBG metal and 20mm HBG metal and sand filled with excavated earth above ground level etc., complete and as directed by the officer incharge of work. Dispersion trench
1
1679
1679
Supply and fixing of 25.4 mm dia & 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws
3
546
182
Supply and fixing of NP soap dish heavy type with NP SCREWS
3
1833
611
Applying Birla/ Asian wall care putty average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls and top painting with emulsion paint two coats of Asian brand of approved colour including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls .Plastering 12mm thick single coat with cement mortar(1:4) Prop. Plastering 12mm thick to Brick masonry in single coat with cement mortar(1:6) Prop.
650
139750
215
Electrification to Office Building:
-
-
-
Supply and Fixing of 25mm dia 2.2 mm thick PVC pipe of make Sudhakar/ Modi/ Atul (ISI MARK) concealed in Roof & wall with all required accessories including masonry work and labour charges etc., complete.
70
7280
104
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R flexible copper cable of makes KEI/Poly cab/ Gold medal/ Anchor/ Suncab (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light. (For Office Building)
29
14123
487
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
12
1680
140
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
6
2400
400
Supply and fixing of batten holder/slanting holder inlieu of ceiling rose of light point complete with all connections and all labour charges with bulb etc., complete for new installation.
7
714
102
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
50
3900
78
Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal cconnections and labour charges etc., complete.
1
4164
4164
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
10
7180
718
Supply and erecting ceiling fan with 3 blades and double ball bearings and with condenser A.C.250V 50C/S of (48") 1200mm sweep completely errected in position with Resistance type regulator, canopy down rod upto 304.8 mm in length is provieded with hook/clamps nuts and bolts and 24/.2 flexible copper wire etc., complete and pointed with lettering by enamel paint the Sr. No and date of errection including cost and conveyance of all materials and labour charges
7
22876
3268
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes
1
4720
4720
Supply and laying of 10 sqmm 4 core XLPE insulated, 1100V grade armoured aluminium cable as per specification conforming to IS-7098 (part-I) of makes Polycab/ KEI/ RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
60
23520
392
Supply & Fixing of 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
60
28800
480
Supply and fixing of buzzer / Calling bell on 100 x 100 mm (4"x4") decolam block including giving connections, cost of all accessories and labour charges etc., complete.
1
214
214
Supply and Run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete.
20
320
16
Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.
50
1200
24
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
4
12196
3049
Supply and fixing of special Teak wood metre box with hinged dooe and lock arrangements with 4"x4" glass for taking the reading duly polished with Touch wood exterior polish for housing single phase metre and fuse as suggested by T.S.Transco Authorities for finished item of work.
1
800
800
Supply and fixing of 12V, 150 AH MF battery including wireleads make Amar Raja(Power Zone) or Equivalent model of Exide including Supply and installation of 800 VA home UPS system pure
sine wave out put, single phase input / Single phase output.
Makes: Servomax / Top Power / Amar Raja
1
22241
22241
Hamalies Parking Shed:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
50
17950
359
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work.
35
153300
4380
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
50
5100
102
Supply, collection and filling gravel inside basement including cost and conveyance of all materials and labour charges for filling watering, consolidation with hand roller rolling etc., complete as directed by the officer incharge of work.
90
42300
470
Vibrated reinforced Cement Concrete (1:11/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work, labour charges, centering, machine mixing, laying, vibrating, curing , all other incidental and operational charges etc., complete.
-
-
-
For Footings
8
75128
9391
For Columns
3
37308
12436
For Lintels and lofts Over Openings
0.5
6219
12439
For roof slab 115mm thick and impervious coat 20mm thick slab in CM (1:3)
15
27525
1835
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work, labour charges, centering, machine mixing, laying, curing, all other incidental and operational charges, labour charges etc.complete. For Bed Blocks
15
97845
6523
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
50
307300
6146
Plastering 12mm thick to Brick masonry in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including, all water leads machine mixing etc., complete for finished item of work
350
60900
174
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing, water leads, machine mixing etc., complete for finished item of work.
200
37000
185
Colour washing one coat over one coat of white wash to all outside faces including basement with approved colour including cost, conveyance of all materials to site of work such as lime, colour (yellow) gum, conge water, labour charges etc., complete for finished item of work.
350
22750
65
Painting two coats with synthetic enamel paint first grade of Asian / Nerolac / Berger etc., over a coat of primer including cost of primer and conveyance of all materials, labour charges etc., complete
50
9800
196
Supply of steel including cutting, bending, crancking and placing them in position tying grills including cost of steel, binding wire, labour charges etc., complete for finished item of work as directed by the Officer incharge of the work .
1.2
74719
62266
Supply & Fixing of main pipe of 4.65M length of 101.6mm OD (H) MS tubes including at eves and ridges with 6 mm thick cleats for fixing including red oxide coating etc., complete and as per the drawing enclosed for cycle shed.
7
58737
8391
Supply & Fixing of 15’-3” c/c (4.65M) long roof purlins made of 76.10mm OD (light) MS tubes including at eves and ridges with 6 mm thick cleats for fixing to trusses including red oxide coating etc., complete and as per the drawing enclosed for parking shed.
24
96960
4040
Roofing with Color coated Galvalume sheet 0.5mm thick, width 1020mm, MPA:550, GSM:AZ150 including sheet fixing charges, cost of screws Hilt/Corroshield self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. Chaseling masonry should be done on one side including filling after insertion of sheet in the groove as directed by officer in charge of work.
150
85050
567
Supply and fixing of glazed Indian water closet 575mm (23 inches) in size of Parry company make and P or S trap and a pair of footrests set in cement mortar and based with concrete and plastered with CM (1:4) prop 12mm thick etc complete for finished item of work
2
4514
2257
Supplying, laying, jointing and testing 110 mm Dia. PVC/SWR pipe 4Kg/cm2 of ISI make with airtight with cement solvent including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping.
6
2478
413
Supply and fixing of 100mm dia PVC ventilating shaft of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete.
2
2432
1216
Supply and fixing CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
6
5190
865
Supply and fixing CP Short body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent
2
1442
721
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 15.90mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes) 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete
20
5100
255
Supply and fixing of Ashirvad/Ajay or equalent CPVC pipes and fittings of 28.60mm OD pipes-SDR 13.5 to meet the requirement of ASTM-D 2846 and are produces in CTS (copper tube sizes 1/2" to 2" SDR 11 mand 13.5 pipes are made from identical CPVC compounds having the same physical properties for hot and cold water (IS15778-2007) with CPVC fittings including the cost of pipe & its fittings & labour charges complete
100
32900
329
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with PVC Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover.
1
749
749
Supplying & fixing 101.6mm floor trap - UPVC pipe fixing with cement solvent as per site requirements with standard practice.
3
672
224
Supply & fixing of Bronze gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size.
2
2838
1419
Supply & fixing of Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size.
2
2504
1252
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
1000
8000
8
Construction of septic tank of size 2.13 x 1.37 x 1.53 M brick in C.M. (1:6) of 0.22 M thick size and bottom C.C. (1:5:10) concrete average thickness of 0.30 M thick and top covered with RCC slab and inside plastering with C.M. (1:4) and construction of baffle wall etc. including earthwork excavation cost and conveyance of all materials required to the work, labour charges as per approved design drawing etc.,complete.
1
25221
25221
Construction of dispersion trench inclusive of excavation of dispersion trench of 1m x 1m x 1m length and filled with 40mm HBG metal and 20mm HBG metal and sand filled with excavated earth above ground level etc., complete and as directed by the officer incharge of work
1
1679
1679
Manufacturing supply and fixing in position of 0.90 x 1.98Mts. Size steel doors with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements and labour charges etc., complete for finished item of work.
2
15920
7960
Flooring with ceramic tiles of first quality over a bed of cement slurry of 12mm thick with C.M. (1:8) Prop. including skirting, curing, mixing of motor, labour charges for laying tiles etc., complete for finished item of work.
25
21100
844
INTERNAL ROADS:
-
-
-
Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD.
2650
1513150
571
Providing, laying, spreading and compacting stone aggregates of 63 mm nominal single size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 MORD.
2650
6108250
2305
Providing, laying, spreading and compacting stone aggregates of 40 mm Single nominal size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 MORD.
1350
3541050
2623
Weigh Bridge:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
40
14360
359
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work.
40
175200
4380
Reinforced Cement Concrete(1:1 1/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Columns
15
186540
12436
Beams
8
95464
11933
Bed blocks for ramps
20
130460
6523
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work. Platforms
60
11100
185
Supply and fixing of Kerb 'L'angle of size 65x65x6mm including labour charges and as directed by the officer incharge of work.
15
10725
715
Supply and fixing of M.S flat of size 120x50x10mm including cost and conveyance, welding charges etc., complete and as directed by the officer incharge of work.
12
1200
100
Supply and fixing of Copper flat of size 20x2mm including cost and conveyance, welding charges etc., complete and as directed by the officer incharge of work.
25
17150
686
Supply of Ribbed steel including cutting, bending, cranking, tying grills and placing them in position including fabrication charges cost of materials and binding wire etc., complete for finished item of work. for columns, plinth beam, Tie beam, including overlaps and wastage etc., complete. Ribbed steel
1
62266
62266
Collection,supply and filling of carted gravel in trenches from approved quarry including cost, conveyance of gravel watering, consolidation with hand roller etc., complete.
30
14100
470
Filling with excavated soils including initial lead and lifts, ramming consolidation etc., complete and sa directed by the officer incharge of work.
40
4080
102
Construction of Cabin Room:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water etc., complete for finished item of work.
15
5385
359
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work.
4
17520
4380
Supply, collection and filling gravel inside basement including cost and conveyance of all materials and labour charges for filling watering, consolidation with hand roller rolling etc., complete as directed by the officer incharge of work.
15
7050
470
Filling foundations and basement with random rubble masonry in cement mortar (1:6) prop. using hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads etc., complete for finished item of work
10
45900
4590
Reinforced Cement Concrete(1:1 1/2:3) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., but excluding cost and conveyance of steel required and binding wire and its fabrication charges for the following items and as directed by the officer in charge of work.
-
-
-
For Columns
5
62180
12436
For Beams- Plinth beam & Roof beam
3
35799
11933
For Bed blocks
0.15
978
6523
For Sun shades 0.60M wide
7
4452
636
For Roof slab 115mm thick & Impervious coat of 20 mm thick in CM (1:6) prop.
25
45875
1835
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
15
92190
6146
Plastering 12mm thick to fly ash cement Brick masonry in one coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads, mixing of mortar etc., complete for finished item of work
150
26100
174
Plastering 12mm thick single coat with cement mortar (1:4) Prop. to RCC works with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads mixing of mortar etc., complete for finished item of work.
50
9250
185
Painting to new walls with two coats of water proof cement paint of Asian/Nerolac/Berger etc.approved brand and shade over a base coat of grade I of approved primer making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials to work site and conveyance of all materials to work site and all operational, incidental,labour charges etc., complete for finished item of work as per SS912 for External walls
80
17040
213
Oil bound distemper two coats over a oil base primer coat of Asian/ Nerolac/ Berger etc., approved colour for interior walls including cost and conveyance of all materials to site of work and all labour charges etc., complete.
70
8470
121
Painting two coats with best synthetic enamel paint first grade of Asian/Nerolac/Berger etc., without priming coat including cost and conveyance of all materials to site of work, cost of brushes and all labour charges etc., complete.
20
2380
119
Supply of Ribbed steel, wrought and put up for fabrication of steel including cost and conveyance of all materials to site of work. Cutting, bending, cranking, tying grills and placing them in position including cost of steel & binding wire, including overlaps and wastage etc., complete. Over laps will not be measured seperately.
1
62266
62266
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation etc., complete.
15
1530
102
Manufacturing supply and fixing in position of 0.90 x 1.98Mts. Size steel doors with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements and labour charges etc., complete for finished item of work. For Doors of size 0.90x1.98mt.
1
7960
7960
Manufacturing supply and fixing in position of 0.90 x 1.20Mts. Size steel Windows with rolled steel ‘L’angles having two frames. The outer frame of 50 x 50 x 3mm m.s.angle and welding of 12mm Square rods at suitable intervals and inner frame of 40 x 40 x 3mm thick having two shutters which will be welded to the outer frame and welding of 14 gauge m.s. Sheet to inner frame including cost and conveyance of all accessories such as holdfasts, tower bolts, locking arrangements etc., complete including cost and conveyance of all accessories such as hold fasts, tower bolts locking arrangements etc., complete including cost and conveyance of all materials to site of work labour charges complete for finished item of work. For windows of size 0.90x1.20mt
4
24012
6003
Supply and fixing of 110mm dia PVC rain water pipe of 3M length including fixing of 100mm dia P V C Cowl in brick work etc. complete.
1
1198
1198
Flooring with CC (1:2:4) prop. of 75mm thick and top finishing with plastering 12mm thick in CM(1:4) prop including cost and conveyance of all materials and labour charges for laying etc., complete for finished item of work
15
9495
633
ELECTRIFICATION TO WEIGHBRIDGE AND CABIN ROOM:
-
-
-
Supply and fixing of 25mm dia 2.2 mm thick PVC conduit pipe conceled in wall with all accessories including chiselling the wall whereever necessary including masonry work for light/ fan point and separate plug point including all labour charges etc., complete
10
1040
104
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) in the existing pipe with 6A switch, ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell & exhaust fan points in Non-residential Buildings except circuit mains excluding cost of wire
4
1948
487
Supply and fixing of 6A 3 pin flush type wall plug socket with 6A flush type marked switch control on a common board with earth continuity including wire Leeds earth connections along with all labour charges etc., complete excluding cost of wire.
8
1120
140
Supply and fixing of 16A 3pin and 6A 3pin flush type plug socket with indicator lamp and 16A switch control (5 in one) duly recessed in wall with T.W deep box of 6" x 8" x 2 1/2" size covered with 3mm thick hylam sheet including earth connections and all labour charges etc., complete.
4
1600
400
Supply and fixing of batten holder/slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with bulb etc., complete for new installation.
1
102
102
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) PVC insulated flexible copper cable in existing metallic/non metallic conduit pipe for runs of mains including labour charges etc., complete.
20
1560
78
Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with glass body, wide operating voltage with single/ double side connection, PF≥0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80, etc complete with all accessories with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
2
1436
718
Supply and transportation of 20W LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F 0.90, System having efficacy 100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete with BIS certification with warranty 50,000 burning hours. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
2
6098
3049
Supply and erecting ceiling fan with 3 blades and double ball bearings and with condenser A.C 250V 50C/V of (48") 1200mm sweep completely erected in position with Resistance type regulator, canopy down rod up to 304.8mm in length is provided with hook/clamps nuts and bolts and 24/0.2 flexible copper wire etc., complete and pointed with lettering by enamel paint the Sl.No and date of erection including cost and conveyance of all materials and labour charges
1
3268
3268
Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Meters length with necessary accessories with hume pipe ring duly providing staggered holes and required bolts, nuts and washers, checknuts hume pipe ring etc as per IS specifications with necessary double G.I earth wire No.8 SWG including filling with equal pro. of salt and charcoal in layers and all labour charges ete., complete.
2
9440
4720
Supply and laying of 6 sqmm 2 core XLPE insulated, 1100V grade armoured aluminium cable as per specification conforming to IS-7098(part-I) of makes Polycab/ KEI/RPG/ Finolex/ Havels/ Paragon/ V-Guard/ Forture Art/ Gloster/ Suncab including cost of all accessories and labour charges etc., complete.
120
44160
368
Supply & Fixing of 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
120
36720
306
Supply and run of No.14 SWG G.I wire including cost of all accessories and labour charges etc., complete
10
160
16
Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) FR PVC insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete
20
480
24
Construction of Compound Wall:
-
-
-
Earth work excavation for foundations in ordinary gravel soils and disposal of soils as directed by the officer in charge of work including all leads and lifts, shoring, strutting etc., excluding bailing out of water complete for finished item of work.
400
143600
359
Filling foundations with cement concrete (1:5:10) Prop. Using 40 mm gauge (HBG) metal including cost and conveyance of all materials to site of work, labor charges, shoring, strutting, machine mixing and laying of concrete, compacting including curing, hire and operational charges of all tools and plants required and water leads, but excluding bailing out of water etc., complete for finished item of work
85
372300
4380
Filling foundations and basement with randoum rubble masonry in cement mortar (1:6) prop. using hard variety of hard variety of granite stone requiring blasting, including cost and conveyance of all materials to site of work, labour charges and curing including all water leads fixing of bond stones for each layer, machine mixing of mortar etc., complete for finished item of work
530
2432700
4590
Filling inside basement with excavated soils including initial lead and lifts, ramming consolidation with hand roller 2 tone including operational charges of tools and plants etc., complete.
400
40800
102
Providing Masonry work in cement mortar (1:6) Prop. with fly ash cement solid blocks of size 290 x 225 x 140mm for manufacturing of fly ash solid blocks using fly ash 80Kgs, cement of 15 Kgs gypsum of 5Kgs and stone dust including cost and conveyance of all materials, Labour Charges, water leads, curing, scaffolding charges, lift charges, machine mixing charge etc., complete with compressive strength not less than 50 Kgs for 225mm thick walls for superstructure.
330
2028180
6146
Plain Cement Concrete (1:2:4) Prop. Using 20mm size ISI gauge hard broken granite machine crushed metal including cost and conveyance of all materials to site of work and labour charges, centering, machine mixing, laying, curing and all other incidental and operational charges, water leads etc., for the following items and as directed by the officer in charge of work.
3
19569
6523
Supply and fixing of G.I. barbed wire of 12/14 gauge 2 rows, four knots, tightening the same including cost and conveyance of all materials, binding wire etc. complete for finished item of work.
2600
54600
21
Supply and fixing of L-angle of size 35 x 35 x 6mm and length of 1.00M including cutting, bending, welding hooks for fixing of barbed wire etc., complete for finished item of work and as directed by the officer in charge of work. For Fencing poles
300
84300
281
Plastering 12mm thick single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of all materials, labour charges, curing including water leads machine mixing of mortar etc., complete for finished item of work
2900
504600
174
Plastering 20mm thick to RR masnory in single coat with cement mortar (1:6) Prop. with sponge finishing including cost and conveyance of materials to site of work, curing including all water leads machine mixing of mortar etc., complete for finished item of work
1500
391500
261
Colour washing one coat over one coat of white wash to all outside faces including basement with approved colour including cost, conveyance of all materials to site of work such as lime, colour (yellow/black oxide) gum, conge water, labour charges etc., complete for finished item of work as directed by the officer in charge of work.
4400
286000
65
Construction of main gate pillars of size 0.45 x 0.45 x 2.55M of RCC (1:1 1/2:3) prop exvating the pit of size 1.20 x 1.20 x 1.05M filling with CC (1:5:10) of 0.15M depth and balance filled with CC (1:11/2:3) prop including ribbed and mild steel as per drawings enclosed and plastering with 12mm thick in CM(1:4) prop and painting with cement paint etc., complete for RCC pillars for fixing main gate.
2
34870
17435
Manufacturing, supply & fixing Main gate of size: 8.00 x1.98M with outer frame of rectangular pipe of size:3"x1.5" of 14 gauge & middle horizontal Square pipes of size:1.5"x1.5" of 14 gauge and internal vertical Square pipes of size:1.25"x1.25" of 14 gauge and providing profolated sheet of 20 gauge in middle of 0.60M height including cost of hold fasts, locking arrangements including painting one primer coat of red oxide paint including cost and conveyance of all materials etc., complete as per drawing enclosed and as directed by the officer incharge of work.
1
65073
65073
Manufacturing, supply & fixing Wicket gate of size: 1.05 x1.98M with outer frame of rectangular pipe of size: 3"x1.5" of 14 gauge& middle horizontal Square pipes of size: 1.5"x1.5" of 14 gauge and internal vertical Square pipes of size: 1.25"x1.25" of 14 gauge and providing profolated sheet of 20 gauge in middle of 0.60M height including cost of hold fasts, locking arrangements including painting with one primer coat of red oxide paint including cost and conveyance of all materials etc., complete as per drawing enclosed and as directed by the officer incharge of work.
1
3753
3753
DRILLING OF 61/2'' DIA BOREWELL:-
-
-
-
Drilling of 61/2” dia Bore well with Rotary type including yield test and labour charges etc., complete and providing not less than 200mm including insertion of 175mm dia PVC casing pipe with coupling, any other relevant material required up to depth as directed by the officer in charge of work and transportation of brick including development, flushing with bore well at pressure of 7kg per Sq. cm. Conducting yield test crew charges, cost of all material required for fixing of pipes excluding cost of casing pipe, coupling and caps.
120
36840
307
Supply and fixing of blue casing pipe of 175mm dia complete and as directed by the officer incharge of work and labour charges etc., complete
12
12600
1050
Supply and fixing of dummy casing pipe of 175mm dia and labour charges etc., complete and as directed by the officer incharge of work
1
650
650
Supply and fixing of 175mm dia clamp set complete and labour charges etc., complete and as directed by the officer incharge of work
1
450
450
Supply and fixing of 2HP/25 stage submersible motor and pump sets including starter and electrical wiring etc., and as directed by the officer incharge of work
1
29995
29995
Supply and Transportation of outer dia of 50mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN-500 86/IS 14930 part-II. Makes: DURA LINE (Dura Guard)/ Bajaj/ Gamson/ Ultra Plus
100
10600
106
Supply and fixing of Tap valve and labour charges etc., complete and as directed by the officer incharge of work.
2
360
180
Testing charges for laying bore well points
2
2000
1000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements