Sri Konda Laxman Telangana State Horticultural University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 20,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
160979Tender No
02/HU/EO/19-20Tender Authority
Sri Konda Laxman Telangana State Horticultural University ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and filling with carted gravel/morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel
2396.05
-
210.4
Plinth protection of all-round the building with 75 mm thk PCC (1:4:8) and top surface with 50mm thk PCC (1:4:8) over the Rabbit wire mesh (chicken mesh) of not less than 30 gauge finished ground with proper gravel leveling & consolidation , Including cost and conveyance of all materials like Cement, Sand/ MSand, coarse aggregate, water etc. to site, cost of on all materials including all incidental operational and labour charges, all types of taxes, all tools and plants, hire charges of machinery lift charges, water curing etc., exculding seigniorage charges for complete finished item of work as directed by engineer in charge
212
-
650.23254885
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., excluding seigniorage charges, complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation
313.21999999999997
-
4550.86
Providing Plain cement concrete in (1:3:6) M-10 Grade proportion machine mixing for foundations, under flooring, sill slab, coping, fillets, cc bed for walls, anchor/ bed blocks etc using 20mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement sand, coarse aggregate, water etc to site, including cost of centering and shuttering charges, de- shuttering charges, , all incidental, operational and labour charges, all types of taxes, machine mixing, laying compacting, placing and vibrating to required level, all scaffolding, lead and lift charges, all type of tools and plant, hire charges of machinery, water, curing etc., Excluding seigniorage charges complete for finished item of work as directed by engineer in charge at all heights and levels-including cost of Cement (For bed blocks/anchor blocks etc) (TDSS No 402) (pcc 1:3:6)
3.7899999999999996
-
5209.2
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For Footings
127
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering ForFor Pedestals using acro centering
18.35
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For For Columns up to Ground level/ Plinth beam level
24.32
-
12333.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For For Plinth Beams using acro centering
49.55
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For 3.66m For Lintels using acro centering
8.02
-
12229.4
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For For decking slab at mezzanine floor without centering and shuttering 125 mm thick Roof slab
381.68
-
688.425
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering For M25 Grade Slab 100mm thick
245.03
-
5967.6
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Sunshade/chajjas of 62.5mm thick slab using acro centering only river sand shall be usedRCC M 25 - Nominal Mix for Sunshades of 62.50mm thick with Drip Couse band of size 40mm x 20mm
118.78
-
1380
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge(clause 1000 and 1202 MORD & 1100,1600 MORTH)
21.490000000000002
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.
116.86
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) with 2nd class Bricks traditional size 23 x 11 x 7 cms CLASS AS PER TABLE-1 OF IS:1077-1992 (Class designation 7.5) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
663.11
-
6569.1
First Floor:Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) with 2nd class Bricks traditional size 23 x 11 x 7 cms CLASS AS PER TABLE-1 OF IS:1077-1992 (Class designation 7.5) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
95.29
-
6736.1
Reinforced Brick masonry 115 thick for panel walls in super structure with Cement Mortar (1:3) proportion (cement : sand) with 2nd class Bricks traditional size 23 x 11 x 7 cms CLASS AS PER TABLE-1 OF IS:1077-1992 (Class designation 7.5) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , exculding seigniorage charges, Concrete & steel for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 509) ground floor
258.02
-
867.36
Plastering to rcc surfaces exposed Lintels, sunshades, projection slab 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, all types of taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,fixing mesh, hacking, finishing, scaffolding, lift charges, all types of tools and plant and hire charges on machinery water hacking, water, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Ceiling rcc surfaces & Beams etc Plastering 2 coats in CM (1:3) & (1:5): 12 mm FOR GROUND FLOOR compolete for finished item of work and as directed by the engineer incharge as per drawing
761.42
-
473.8
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
5274.27
-
455.8
First Floor:Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
654.63
-
493.1
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal & External
971.1
-
485.3
First Floor:Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal & External
230.09999999999997
-
522.7
Plastering 12 mm thick in single coat in CM (1:4) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plant and hire charges on machinery, and all operational, incidental and labour charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, hacking, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 905) Dadoing & cladding areas GROUND FLOOR as per drg
57.96
-
189
Supplying laying fixing in Flooring with Vitrified tiles full body double charged stain free,scratch free of size 800 x 800 mm not less than 8 to 10mm thick premium colour 1st quality of all types of shape, design shade colour design pattern, texture, finish and ,as approved by Engineer of all sizes Thickness not less than 8-18 mm confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) set over a base coat of CM (1:8) prop. 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, shape, design pattern, levelling to perfect level, scaffolding and lift charges, all operational, incidental and labour charges, all types of tools plant and hire charges of machinery all types of taxes, lead and lift charges curing wtc as directed by the Engineer-in-charge curing etc., complete for finished item of work. (TDSS No.707 & 701)----FLOORING Floring with vitrified tiles 8 to 10mm thick in CM 1:8 premium colour 1st quality Ground floor (base coat in cm and size of tile is 800x800mm)
97.56
-
1256.1
First Floor:Supplying laying fixing in Flooring with Vitrified tiles full body double charged stain free,scratch free of size 800 x 800 mm not less than 8 to 10mm thick premium colour 1st quality of all types of shape, design shade colour design pattern, texture, finish and ,as approved by Engineer of all sizes Thickness not less than 8-18 mm confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) set over a base coat of CM (1:8) prop. 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, shape, design pattern, levelling to perfect level, scaffolding and lift charges, all operational, incidental and labour charges, all types of tools plant and hire charges of machinery all types of taxes, lead and lift charges curing wtc as directed by the Engineer-in-charge curing etc., complete for finished item of work. (TDSS No.707 & 701)----FLOORING Floring with vitrified tiles 8 to 10mm thick in CM 1:8 premium colour 1st quality Ground floor (base coat in cm and size of tile is 800x800mm)
381.66
-
1297
Supplying. providing and laying of Skirting with Vitrified tiles full body double charged stain free, scratch free of premium colour of first quality make , of all shapes, design, shade, finish, pattern, texture and colour as approved by Engineer of all sizes, 8-12mm thick confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) to internal walls for 100 mm height with length equal to flooring tiles and matching the flooring joint lines and set over 12mm thick base coat of CM (1:3) prop. and neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per sq.mt and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles,skirting shall be flushed to the wall surface with a groove between wall and tile , including cost and conveyance of all materials like cement, sand, water, Vitrified tiles, white cement etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plants and hire charges of machinery, cost of base coat, all operational incidental and labour charges for mixing of cement mortar, laying tiles to required shape design, pattern, slope leveling to perfect level, scaffolding and lift charges, curing etc., complete for finished item of work (TDSS No 707 & 701) at All heights and levels in all floors, as directed by the Engineer.
6
-
1270.9
First Floor:Supplying. providing and laying of Skirting with Vitrified tiles full body double charged stain free, scratch free of premium colour of first quality make , of all shapes, design, shade, finish, pattern, texture and colour as approved by Engineer of all sizes, 8-12mm thick confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) to internal walls for 100 mm height with length equal to flooring tiles and matching the flooring joint lines and set over 12mm thick base coat of CM (1:3) prop. and neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per sq.mt and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles,skirting shall be flushed to the wall surface with a groove between wall and tile , including cost and conveyance of all materials like cement, sand, water, Vitrified tiles, white cement etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plants and hire charges of machinery, cost of base coat, all operational incidental and labour charges for mixing of cement mortar, laying tiles to required shape design, pattern, slope leveling to perfect level, scaffolding and lift charges, curing etc., complete for finished item of work (TDSS No 707 & 701) at All heights and levels in all floors, as directed by the Engineer.
21.44
-
1309.1
Supplying Providing and Laying Flooring with non skid ceramic tiles of all sizes and thickness between 8-10 mm with scratch free, stain free, premium 1st quality confirming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any shape, colour, design, texture finish, pattern and shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like, cement sand, water, non skid vitrified tiles etc. to site, including seignorage charges, all types of taxes, on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying of tiles in all types designs, texture, pattern shape, cutting curing, lift charges, including all types of tools and plant sand hire charges of machinery etc., complete for finished item of work. as directed by engineer in charge in all floors at all heights and levels (TDSS No.707 & 701)----FLOORING Flooring with non-skid ceramic tiles and not less than 7.3 mm thick in CM 1:8 Ground floor
40
-
831
Providing Dadooing to walls with ceramic tiles of all sizes and thickness of 6mm-8mm scratch free, stain free, Premium 1st quality confirming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour, design, texture, and finish pattern and shape in all shades and designs as approved by Engineer - in - charge and size not les than 300mm x x600mm and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like sand, water, tiles, etc. to site, including seignorage charges, all types of taxes, on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying in position for all types of design pattern and shape, curing, scaffolding and lift charges, all types of tools and plants and hire charges of machinery, etc., complete for finished item of work as directed by engineer in charge For Dadooing in toilets walls, and other areas etc at all heights and levels in ground floors
50.089999999999996
-
853.6
52 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20mm nominal size) and top layer12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate, 6mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacture’sspecifications. including cost and conveyance of all materials like cement, sand, water, etc., to site (excluding cost of C.C. bed & seigniorage charges) cost on all materials, cost of base coat and all labour charges for mixing of cement mortar, , lift charges, curing etc., complete for finished item of work as directed by the Engineer-in-charge -For projection slab alround the building(TDSS 701 & 710)
208
-
466.8
Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 77,finish painted with a polyester paint, section for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard
bars @ 150 mm pitch for Windows: Double shutter with Mullion section for sizes 4'-6 x 4 '-6 (1371.6x1371.6mm) 5'-0 x 4'- 0 (1524x1219.2mm) and 6'-0 x 4'- 0 (1828.8x1219.2mm) (1828.8x1371.6mm) (TBSC-M.I-04)
157.95
-
6779.4
Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish paintedwith a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i)
Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm)
(Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section
sizeof33x56mmMullionsectionsizeof33x56 mm (TBSC-M.III-02)
1.44
-
5395.6
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steelas per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of size 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flushto the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 60 minutes Fire Rated door conforming to IS:3614 (Part2) 1992 (TBSC-L.III-23)
105.3
-
14271.2
Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mmthick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick& 5mm wide single side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the ack(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm
thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specification and drawing. (TBSC-L.III-03)
8
-
2537
supplying providing fabrication erection, hoisting, fixing in position, to plumb and line level and fixing of MS Steel work in built up tubular (round, square or rectangular hollow tubes etc for Railing as per drg and as per approved design,shape ,texture, materials off all types of design,including heavy duty hinges, aldrop, handles, tower bolts, ball baerings etc including one coat red oxide primer and two coats of synthetic enamel paint including cost and conveyance of all materials like ms tubes, powder coated gi mesh design grill, to site including all types of taxes, all tools and plants machinery including all operational incidental and labour charges, fabrication erection, cutting hoisting fixing in position,bolts washers welding welding rods scaffolding charges lift charge,s watering,plumb line and level etc complete for finished item of work as directed by the engineer incharge as per drg
1653
-
104.47
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof(Apex Ultima exterior grade premium and 1st quality by Asian paints make), water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand colour design pattern texture and shade, of any colours and designs having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including sand papering (using emery paper with 180 and 320 emery paper), including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer in charge in all floor at all heights and levels (TDSS 1201 &1216) for External walls and in all floors and at all heights and levels as per manufacturer specifications and should be anti dust, antibacteria, anti fungus water and weather resistance water proof with warranty and guaranty etc Specification shall be in lines with IGBC spec of low voc should be anti dust, antibacteria, anti fungus water and weather resistance water proof etc with warranty and gauranty as per manufacturer specification
972
-
130.2
Painting to new internal walls and Ceiling with 2 coats of ready mixed Acrylic based oil bound wahsable distemper premium 1st quality of approved brand colour pattern, and shade over a base coat of appropriate primer of approved brand, should be anti dust, anti bacteria, anti fungus eyc, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site,all types of taxes on all materials, scaffolding and lift charges, cost of brushes, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc.,. complete for finished item of work as per TDSS 1201 &1216 to interior faces of walls and ceiling in all floors. Specification shall be in lines with IGBC spec of low voc (as diected by engineer incharge in all floors at height and levels should be anti dust, anti bacteria, anti fungus etc as per manufacturers specifiations with warranty and gauranty
5015.77
-
119.8
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
318.78
-
181.7
Fixing erection and placing of Foundation bolts in line and level as per drawing cost includes labour,material,making threads for bolts etc.complete as per spec, including template, including cost and conveyance of all materials to site, all type of taxes on all materials, all types of tools plants and hire charges on machinery, scaffolding and lift charges, all operational incidental and labour charges etc at all heights and levels etc complete for finished item of work, as directed by engineer in charge as per drawing ( only foundation bolts/washers will be supplied by peb) all other shall be included
1598.1299999999999
-
89.72744624999999
PEB WORK :-Supply & Installation of Primary (Built-up) sections Excluding freight and including applicable taxes are fabricated from hot rolled steel plates conforming to ASTM A 572M Grade 345 (or equivalent) type 2 with minimum yield strength of 345 MPa. Flanges are welded to the web by a continuous single side fillet weld deposited by an automatic submerged arc welding process. The Built up frame shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,Primary members
70.76
-
81200
Secondary Members : Supply of secondary members are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site .minimum yield strength of 345 MPa Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,Secondary Members :
19.6
-
89500
Roofing /Cladding With 0.5mm thick galvanized /pre painted G.I profiled sheets fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,Roofing/ Cladding(TDSS 814)
4065
-
-
Turbo Vent with Aluminium Base: Specially designed aluminum base for mounting of Turbo vents with 600mm Throat . These turbo vents base should have same profile as the roof panel/ sheeting inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
28
-
8000
Sky Light Panels: Specially designed 1.5mm thick FRP Skylights specially designed for SSR inclusive of all taxes Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
86
-
1100
Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer.shall be used for fixing double-lock standing seam roof system which shall be approved by concern authority Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST, .Trims
128
-
1050
Trims and Flashings : Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer which shall be approved by concern authority inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,- 200 dia PVC down spout
172
-
1050
Trims and Flashings/Barge boards : Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer.shall be used for fixing double-lock standing seam roof system which shall be approved by concern authority Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
130
-
1050
Deck sheeting as per the design for the mezzanine areas as shown in the drawings and shall be approved by the concerned authority Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
376
-
850
Insulation: 50mm thick Rock wool insulation of 48Kg/CUM density were ever required as per the drawings and as directed by the engineer and shall be approved by the concern authority,inclusive of all taxes.(CPWD 10.77) Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
1
-
1077
SANITARY&PLUMBING WORK:-Supplying and fixing PVC Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
20
-
387.88
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approvedmakeetc.completeforfinisheditemofwork in all respects: WhiteColour.
5
-
16974.08
Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 gramsSeiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block with single CP pillarcock.
5
-
3996.52
Supplying and fixing CP finish brass Soap dish 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
590.12
Supplying and fixing mirror with plastic frame , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
554.44
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm dia withbrackets.including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
2157.09
S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931
15
-
849.39
Supplying and fixing Chrome plated bib cock cum health faucet with 1m long flexible tube and wall hook of Jaquar make queen series/Jupiter Aqua Lines-JAL or equivalent series as approved by Engineer-In-Charge with 7 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges , overheads & contractor profit complete for finished item of work in all floors.
5
-
3327.78
Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
5
-
3387.09
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors
7
-
1617.12
75mmdia Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (for Waste water)
65
-
250.18
110mmdia Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (for soil waste)
30
-
367.01
22.20mm OD pipeSupply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
50
-
196.55
28.60mm OD pipeSupply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
70
-
235.18
41.30mm OD pipeSupply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
50
-
397.65
25mm Nominal boreSupplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
10
-
1292.94
40mm Nominal boreSupplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
1
-
2644.96
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
3000
-
7.95
ELECTRICALWORK:- CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
350
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
20
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
10
-
80.52000000000001
Supply and Fixing of 32mm outer dia medium (2.10 mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
10
-
90.42
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. make: Modi with ISI
10
-
60.17
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 38/40 size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.make Modi with ISI
10
-
90.97
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
50
-
35.144999999999996
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
90
-
702.9000000000001
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Two light points control by one switch.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
50
-
971.6666666666667
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Three light points control by one switch.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
5
-
1240.4333333333334
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.(Double hight/stairecase points)
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
2
-
1054.35
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.(Double hight two light point control by one switch)
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
1
-
1582.4416666666666
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.(Double hight three light point control by one switch)
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
1
-
1979.5416666666665
CIRCUIT WIRING:-Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
54.78154
Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
75
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
75
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
80
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
80
-
37.68908
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
30
-
51.82408000000001
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
30
-
73.54908
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
315.348
Supply and run of 4 of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable in existing pipe for mains including all labour charges etc., complete. Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
451.748
CONTROL CABLES:-supply & laying of following cables shall be on wall / existing pipe/cable tray with necessary fixing accessaries etc., 3C X 2.5 sqmm PVC insulated flexible CU cable
160
-
146.366
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
30
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
35
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
35
-
601.26
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board].
Modular Switch,Socket,Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
20
-
876.2599999999999
LIGHT FIXTURES AND FANS:-Supply and transportation of .60W.. LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's, System efficacy 100 lm / W and junction temprature 70°C, with Ingrees protection IP65, IK05, Driver surge protection 4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with BIS certification with warranty 50,000 burning hours. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. MAKE : PHILIPS / PANASONIC / CROMPTON / BAJAJ /HAVELLS /
65
-
9405
Supply and transportation of Surface/Recess Mounted 12W LED down light slimline panel Light Housing made of Pressure die cast aluminium with Powder coated, round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 90 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete with 50,000 burning hours. MAKE : PHILIPS / PANASONIC / CROMPTON / BAJAJ /HAVELLS /
100
-
740
Supply and transportation of Surface/Recess Mounted 18W LED Down light slimline panel Light Housing made of Pressure die cast aluminium with Powder coated, round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 90 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete with 50,000 burning hours. MAKE : PHILIPS / PANASONIC / CROMPTON / BAJAJ /HAVELLS /
15
-
1155
Fixing of 12W/18W/36W/45W/60W led down light luminaire on Recess/ surface with all accessories including giving connections and all labour charges etc., complete.
115
-
156.60920000000002
Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
20
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
20
-
166.452
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 9W LED bulb
20
-
299.2
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
25
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
25
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
25
-
193.215
Supply of 18" (450mm) heavy duty exhaust fan with
wire guard etc complete etc., complete.
Makes : Crompton / Bajaj Bahar WG / Havells Ventil
Air-DB / Orient hill air.
8
-
4843.96
Labour charges for fixing of Exhaust fan in wall with necessary connections etc., complete ( for hole already made available).
8
-
352.98999999999995
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
2
-
5852
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete.Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 NosDB Makes : Legrand / Schneider.Isolator Make: Legrand-DX3 / Schneider-Acti9.MCB ake:Legrand-DX3 / Schneider-Acti9.
6
-
8472.2
Supply and fixing of 4 Way VTPN DB suitable for accomodating 125A 4 Pole MCCB as incomer and 63A,10KA, TP MCBs-4 Nos as outgoing and with IP 43 Protection including internal connection and labour charges for surface / flush mounting etc., complete. Incommer: 125A,4P,25KA MCCB-1No. Outgoing: 63A, 10KA , TP MCB's -4 Nos
DB Makes : Legrand / Schneider.
MCCB Make: L&T / Schneider / Siemens / Legrand.
MCB Make: Legrand-DX3 / Schneider-Acti9.
3
-
24758.8
Supply and fixing of 8 Way VTPN DB suitable for accomodating 160A 4 Pole MCCB as incomer and 63A,10KA, TP MCBs-8 Nos as outgoing and with IP 43 Protection including internal connection and labour charges for surface / flush mounting etc., complete. Incommer: 160A,4P,25KA MCCB-1No. Outgoing: 63A, 10KA , TP MCB's -8 Nos
DB Makes : Legrand / Schneider.
MCCB Make: L&T / Schneider / Siemens / Legrand.
MCB Make: Legrand-DX3 / Schneider-Acti9.
1
-
34388.2
TURMERIC,GINGER,GARLIC,WASHING SHED-CIVIL:-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
117.636
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
360
-
170.4
Supply and filling with carted gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
354
-
210.4
Plinth protection of all-round the building with 75 mm thk PCC (1:4:8) and top surface with 50mm thk PCC (1:4:8) over the Rabbit wire mesh (chicken mesh) of not less than 30 gauge finished ground with proper gravel leveling & consolidation , Including cost and conveyance of all materials like Cement, Sand/ MSand, coarse aggregate, water etc. to site, cost of on all materials including all incidental operational and labour charges, all types of taxes, all tools and plants, hire charges of machinery lift charges, water curing etc., exculding seigniorage charges for complete finished item of work as directed by engineer in charge
82
-
650.23254885
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
45.46
-
4550.86
Providing Plain cement concrete in (1:3:6) M-10 Grade proportion machine mixing for foundations, under flooring, sill slab, coping, fillets, cc bed for walls, anchor/ bed blocks etc using 20mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement sand, coarse aggregate, water etc to site, including cost of centering and shuttering charges, de- shuttering charges, excluding seigniorage charges , all incidental, operational and labour charges, all types of taxes, machine mixing, laying compacting, placing and vibrating to required level, all scaffolding, lead and lift charges, all type of tools and plant, hire charges of machinery, water, curing etc., complete for finished item of work as directed by engineer in charge at all heights and levels-including cost of Cement (For bed blocks/anchor blocks etc) (TDSS No 402) (pcc 1:3:6)
0.54
-
5209.2
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
7.2
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Pedestals using acro centering
1.08
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
11.5713
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc., complete including hire charges forcentering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25/ (Weigh Batch) Centering with Steel props and plates upto 3.66m For Lintels beams using acro centering
0.73
-
12229.4
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Sunshade/chajjas of 62.5mm thick slab using acro centering only river sand shall be used
12.68
-
1380
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge As per drg(clause 1000&1202 MORD &1100,1600 MORTH)
3.84
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.
40.75
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
45.37
-
6569.1
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
202.05
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
197.75
-
485.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Grade slab
35.4
-
5967.6
Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 77,finish painted with a polyester paint, section for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard
bars @ 150 mm pitch for Windows: Double shutter with Mullion section for sizes 4'-6 x 4 '-6 (1371.6x1371.6mm) 5'-0 x 4'- 0 (1524x1219.2mm) and 6'-0 x 4'- 0 (1828.8x1219.2mm) (1828.8x1371.6mm) (TBSC-M.I-04)
16.2
-
6779.4
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
11.34
-
11710.3
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof(Apex Ultima exterior grade premium and 1st quality by Asian paints make), water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand colour design pattern texture and shade, of any colours and designs having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including sand papering (using emery paper with 180 and 320 emery paper), including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer in charge in all floor at all heights and levels (TDSS 1201&1216) for External walls and in all floors and at all heights and levels as per manufacturer specifications and should be anti dust, antibacteria, anti fungus water and weather resistance water proof with warranty and guaranty etc Specification shall be in lines with IGBC spec of low voc should be anti dust, antibacteria, anti fungus water and weather resistance water proof etc with warranty and gauranty as per manufacturer specification
197.75
-
130.2
Painting to new internal walls and Ceiling with 2 coats of ready mixed Acrylic based oil bound wahsable distemper premium 1st quality of approved brand colour pattern, and shade over a base coat of appropriate primer of approved brand, should be anti dust, anti bacteria, anti fungus eyc, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site,all types of taxes on all materials, scaffolding and lift charges, cost of brushes, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc.,. complete for finished item of work as per SS 911 to interior faces of walls and ceiling in all floors. Specification shall be in lines with IGBC spec of low voc (as diected by engineer incharge in all floors at height and levels should be anti dust, anti bacteria, anti fungus etc as per manufacturers specifiations with warranty and gauranty(TDSS 1201&1216)
202.05
-
119.8
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
34.56
-
181.7
Fabrication fixing erection and placing of Anchor bolts in line and level as per drawing cost includes labour,material,making threads for bolts etc.complete as per spec, including template, including cost and conveyance of all materials to site, all type of taxes on all materials, all types of tools plants and hire charges on machinery, scaffolding and lift charges, all operational incidental and labour charges templates etc at all heights and levels etc complete for finished item of work, as directed by engineer in charge as per drawing all other shall be included
142.28
-
89.72744624999999
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade . (TDSS1606)
91.84
-
825.3
PEB:-Primary members:Supply & Installation of Primary (Built-up) sections Excluding freight and including applicable taxes are fabricated from hot rolled steel plates conforming to ASTM A 572M Grade 345 (or equivalent) type 2 with minimum yield strength of 345 MPa. Flanges are welded to the web by a continuous single side fillet weld deposited by an automatic submerged arc welding process. The Built up frame shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,(TDSS 1103)
10
-
81200
Secondary Members : Supply of secondary members are cold-formed from steel coils conforming to ASTM A 653M (or equivalent), The members shall be Sweep blasted with one coat of primer paint applied at factory and finished coat 2@30 Microns at site .minimum yield strength of 345 MPa Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,(TDSS 1103)
2.5
-
89500
Roofing /Cladding With 0.5mm thick galvanized /pre painted G.I profiled sheets fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,(TDSS 814)
482
-
587
Turbo Vent with Aluminium Base: Specially designed aluminum base for mounting of Turbo vents with 600mm Throat . These turbo vents base should have same profile as the roof panel/ sheeting inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
6
-
8000
Sky Light Panels: specially designed 1.5mm thick FRP Skylights specially designed for SSR inclusive of all taxes Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
27
-
1100
Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer.shall be used for fixing double-lock standing seam roof system which shall be approved by concern authority Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST, .Trims
50
-
1050
Trims and Flashings : Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer which shall be approved by concern authority inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,- 200 dia PVC down spout
52
-
1050
Trims and Flashings/Barge boards : Roof flashing and trims and ridge caps are manufactured from the same color as roof panels with 550 MPA yield strength with 26ga thickness. Eave gutters and downspouts are manufactured from the material as recommended by manufacturer.shall be used for fixing double-lock standing seam roof system which shall be approved by concern authority Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
0.35
-
1050
Insulation: 50mm thick Rock wool insulation of 48Kg/CUM density were ever required as per the drawings and as directed by the engineer and shall be approved by the concern authority,inclusive of all taxes.(CPWD 10.77) Inclusive of all taxes, Transportation, C/c of all material & Accessories etc., and excluding GST,
1
-
850
SANITARY & PLUMBING:-Supplying and fixing PVC Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
15
-
387.88
Supplying and fixing CP finish brass Soap dish 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
15
-
590.12
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm dia withbrackets.including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
2157.09
S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931
12
-
849.39
75mmdia (for Waste water):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
60
-
250.18
28.60mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor lev
40
-
235.18
41.30mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor lev
35
-
397.65
25mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
5
-
1292.94
40mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
1
-
2644.96
ELECRICAL:-CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
65
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
25
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
5
-
80.52000000000001
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
30
-
702.9000000000001
CIRCUIT WIRING:-Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
5
-
54.78154
Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
25
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
25
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
40
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
40
-
37.68908
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
51.82408000000001
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
73.54908
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
315.348
Supply and run of 4 of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable in existing pipe for mains including all labour charges etc., complete. Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
451.748
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
10
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
4
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
2
-
601.26
LIGHT FIXTURES AND FANS:-Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
40
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
40
-
166.452
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
6
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
6
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
6
-
193.215
Supply of 18" (450mm) heavy duty exhaust fan with
wire guard etc complete etc., complete.
Makes : Crompton / Bajaj Bahar WG / Havells Ventil
Air-DB / Orient hill air.
2
-
4843.96
Labour charges for fixing of Exhaust fan in wall with necessary connections etc., complete ( for hole already made available).
2
-
352.98999999999995
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
1
-
5852
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete.Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 NosDB Makes : Legrand / Schneider.Isolator Make: Legrand-DX3 / Schneider-Acti9.MCB ake:Legrand-DX3 / Schneider-Acti9.
1
-
8472.2
COOLING TOWER,RO PLANT,BOILER ROOM COMPRESSOR ROOM-CIVIL WORK:-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
86.22
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
66
-
170.4
Supply and filling with red gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
35.96
-
210.4
Plinth protection of all-round the building with 75 mm thk PCC (1:4:8) and top surface with 50mm thk PCC (1:4:8) over the Rabbit wire mesh (chicken mesh) of not less than 30 gauge finished ground with proper gravel leveling & consolidation , Including cost and conveyance of all materials like Cement, Sand/ MSand, coarse aggregate, water etc. to site, cost of on all materials including all incidental operational and labour charges, all types of taxes, all tools and plants, hire charges of machinery lift charges, water curing etc., exculding seigniorage charges for complete finished item of work as directed by engineer in charge
45
-
650.23254885
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
12.06
-
4550.86
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
3.5
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For pedestals using acro centering
1.08
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
2.3899999999999997
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
2.5199999999999996
-
12333.8
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge(Clause 1000&1202 MORD &1100,1600 MORTH)
1.5
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement(TDSS 601&615).
21.06
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
18.78
-
6569.1
Reinforced Brick Masonry for partition walls 115mm thick in super structure half brick thick in CM (1:4) prop.(Cement:Sand) using light weight clay Bricks from approved source having minimum crushing strength of 35 Kg/sq.Cm. and providing 75mm thick concrete band at every one metre interval including providing 2nos of 6mm/8mm rods in the band including cost and conveyance of all materials like sand, bricks, water etc., to site, including cost of seigniorage charges and all other taxes on all materials, scaffolding charges and all operational, incidental charges and labour charges like mixing cement mortar, lift charges, Construction of masonry, curing etc complete but including cost of Cement & steel and its fabrication charges for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
29.2
-
867.36
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
116.28
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
85.08
-
485.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Grade slab
6
-
5967.6
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers including vertical post angular or tubulor as required complete as per the direction of Engineer-in-charge(TDSS 1606)
22.47
-
825.3
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
5.67
-
11710.3
Supplying providing and applying of Painting to new walls 2 coats of ready mixed Oil bound washable distemper (Acrylic Based) of approved brand of all colour pattern design and shade over a base coat of appropriate distemper primer of approved brand making including two or more coats of white cement based putty of approved brand and manufacture to prepare surface even and smooth 3 coats in all to give an even shade after brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site, all types of taxes on all materials, scaffolding and lift charges, cost of brushes,, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc., complete for finished item of work to interior faces of walls and ceiling in all floors. Speficiation shall be in lines with IGBC spec of low voc (asia/buegr/nerolac/british paints manufacturers should be anti dust,anti bacteria, anti fungus etc (TDSS 1201&1216)
116.28
-
119.8
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof,water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand and shade, of any colours and deisign having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer incharge in all floor at all heights and levels (TDSS 911) for External walls and in all floors and at all heights (asian/burger/nerolas british or equivalent manufacturer should be anti dust,anti bacteria, anti fungus water and weather resistance water proof etc(TDSS 1201&1216)
85.08
-
130.2
Supplying Providing and applying painting to new wood work in two coats with ready mixed synthetic enamel paint of premium 1st quality grade -1 having VOC content less than 50 grams/litre of approved all colours texture design pattern brand and shade, of any colours over one coat of wood primer coat (total 3 coats) including cost and conveyance of all materials to site like paint, putty, etc all incidental operational and labour charges, scaffolding charges, lift charges, all types of taxes on all materials, all types of tools plants and hire charges on machinery, curing etc,for preparing and cleaning the surface of dirt with soap and brushes including putty, sand papering with emery paper of required no etc complete for finished item of work and as directed by engineer incharge at all heights in all floors and levels Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)synthetic enamel paint to windows and doors
11.34
-
193.5
Supplying welding, cutting, fabrication and erection of structural steel work in built up tubular truss (round square or rectangular hollow tubes etc) for Cols, Beams,Rafters,Trusses,Purlins,Tie Runners, bracings, insert plates, gusset plates, rails, gantry girders including all accessories like bolts, nuts etc at all heights and levels, elevation including cost and conveyance of all materials like tubular steel to site, Welding rods, including surface treatment for removal of rust, scales etc on surfaces, Using different types emry sand papers ,cleaning and including all incidental operational, labour charges, lift and scaffolding charges, one coat of premium 1st quality red oxide primer paint, special putty as per standards, Anticorrosive Painting premium 1st quality to Steel with 2 coats of ready mixed premium 1st quality Grade-I Synthetic enamel paint of approved colour texture brand and shade,including all types of tools and plants and the machinery hire charges, cranes, consumables required for the cutting fabrication transportation to site and erection, welding works, all types of taxes on all materials, testing and commissioning etc., complete for finished item of work and as directed by engineer in charge and finishing , at all heights and levels in all floors, necessary shop drawing to be prepared by the contractor submitted for approval by the consultants as IS standards as per drawing
710
-
130.71
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
139.36
-
181.7
Supply & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular
Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours(TDSS 814)
69.68
-
439.7
Supplying providing erction laying and fixiong of Rain Water Down take pipes with PVC/SWR pipes of approved make of 110mm dia 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent ceement including chasing and cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges,all other types of taxes on all materials, all types of tools and plants and hire charges ogf machinery, testing and commissiong, curing etc complete for finished item of work as directed by engineer incharge in all heights and levels in all floors, including PVC couplers clips bends and shoes etc as per drawing.
10.5
-
178.37555
CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
60
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
25
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
10
-
80.52000000000001
Supply and Fixing of 32mm outer dia medium (2.10 mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
5
-
90.42
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 25mm size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. make: Modi with ISI
5
-
60.17
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 38/40 size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.make Modi with ISI
5
-
90.97
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
5
-
35.144999999999996
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
18
-
702.9000000000001
CIRCUIT WIRING:-Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
15
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
37.68908
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
315.348
Supply and run of 4 of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable in existing pipe for mains including all labour charges etc., complete. Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
451.748
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
5
-
458.9354
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
10
-
601.26
LIGHT FIXTURES AND FANS:-Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
14
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
14
-
166.452
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
4
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
4
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
4
-
193.215
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
1
-
5852
EB BUSBAR ROOM,DG ROOM-CIVIL WORK;-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
58
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
75
-
170.4
Supply and filling with red gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
40.489999999999995
-
210.4
Plinth protection of all-round the building with 75 mm thk PCC (1:4:8) and top surface with 50mm thk PCC (1:4:8) over the Rabbit wire mesh (chicken mesh) of not less than 30 gauge finished ground with proper gravel leveling & consolidation , Including cost and conveyance of all materials like Cement, Sand/ MSand, coarse aggregate, water etc. to site, cost of on all materials including all incidental operational and labour charges, all types of taxes, all tools and plants, hire charges of machinery lift charges, water curing etc., exculding seigniorage charges for complete finished item of work as directed by engineer in charge
44
-
650.23254885
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
14.78
-
4550.86
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
3.46
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For pedestals using acro centering
1.95
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
3.11
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
1.97
-
12333.8
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge( Clause 1000&1202 MORD &1100,1600 MORTH)
1.3800000000000001
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.(TDSS 601 & 615)
19.240000000000002
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
18.25
-
6569.1
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
69.15
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
85.38
-
485.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Grade slab
6.75
-
5967.6
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers including vertical post angular or tubulor as required complete as per the direction of Engineer-in-chargeTDSS 1606)
27.3
-
825.3
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
3.78
-
11710.3
Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 77,finish painted with a polyester paint, section for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard
bars @ 150 mm pitch for Windows: Double shutter with Mullion section for sizes 4'-6 x 4 '-6 (1371.6x1371.6mm) 5'-0 x 4'- 0 (1524x1219.2mm) and 6'-0 x 4'- 0 (1828.8x1219.2mm) (1828.8x1371.6mm) (TBSC-M.I-04)
2.16
-
6779.4
Supplying providing and applying of Painting to new walls 2 coats of ready mixed Oil bound washable distemper (Acrylic Based) of approved brand of all colour pattern design and shade over a base coat of appropriate distemper primer of approved brand making including two or more coats of white cement based putty of approved brand and manufacture to prepare surface even and smooth 3 coats in all to give an even shade after brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site, all types of taxes on all materials, scaffolding and lift charges, cost of brushes,, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc., complete for finished item of work to interior faces of walls and ceiling in all floors. Speficiation shall be in lines with IGBC spec of low voc (asia/buegr/nerolac/british paints manufacturers should be anti dust,anti bacteria, anti fungus etc(TDSS 1201&1216)
121.29
-
119.8
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof,water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand and shade, of any colours and deisign having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer incharge in all floor at all heights and levels (TDSS 911) for External walls and in all floors and at all heights (asian/burger/nerolas british or equivalent manufacturer should be anti dust,anti bacteria, anti fungus water and weather resistance water proof etc
107.78
-
130.2
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
4.32
-
193.5
Supplying welding, cutting, fabrication and erection of structural steel work in built up tubular truss (round square or rectangular hollow tubes etc) for Cols, Beams,Rafters,Trusses,Purlins,Tie Runners, bracings, insert plates, gusset plates, rails, gantry girders including all accessories like bolts, nuts etc at all heights and levels, elevation including cost and conveyance of all materials like tubular steel to site, Welding rods, including surface treatment for removal of rust, scales etc on surfaces, Using different types emry sand papers ,cleaning and including all incidental operational, labour charges, lift and scaffolding charges, one coat of premium 1st quality red oxide primer paint, special putty as per standards, Anticorrosive Painting premium 1st quality to Steel with 2 coats of ready mixed premium 1st quality Grade-I Synthetic enamel paint of approved colour texture brand and shade,including all types of tools and plants and the machinery hire charges, cranes, consumables required for the cutting fabrication transportation to site and erection, welding works, all types of taxes on all materials, testing and commissioning etc., complete for finished item of work and as directed by engineer in charge and finishing , at all heights and levels in all floors, necessary shop drawing to be prepared by the contractor submitted for approval by the consultants as IS standards as per drawing TDSS 1103
710
-
130.71
Supply & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular
Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours( TDSS 814)
100.8
-
439.7
Supplying providing erction laying and fixiong of Rain Water Down take pipes with PVC/SWR pipes of approved make of 110mm dia 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent ceement including chasing and cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges,all other types of taxes on all materials, all types of tools and plants and hire charges ogf machinery, testing and commissiong, curing etc complete for finished item of work as directed by engineer incharge in all heights and levels in all floors, including PVC couplers clips bends and shoes etc as per drawing
10.5
-
178.37555
CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
50
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
20
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
15
-
80.52000000000001
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
5
-
35.144999999999996
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
14
-
702.9000000000001
CIRCUIT WIRING:-Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
14
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
14
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
5
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
5
-
37.68908
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
51.82408000000001
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
73.54908
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
5
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
2
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
2
-
601.26
LIGHT FIXTURES AND FANS:-Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
10
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
10
-
166.452
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
4
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
4
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
4
-
193.215
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
1
-
5852
SECURITY ROOM(RCC)&RETAIL OUTLET-CIVIL WORK:-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
47.26
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
71.95
-
170.4
Supply and filling with red gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
31.470000000000002
-
210.4
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
13.11
-
4550.86
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
3.2
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
1.08
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
3.4099999999999997
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc., complete including hire charges forcentering/ shuttering/ deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Lintels beams using acro centering
0.45
-
12229.4
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
2.0999999999999996
-
12333.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 4.0m For Slab 125mm using acro centering
3.4099999999999997
-
10600.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 4.0m For Tie/Roof beams using acro centering
90.42
-
1264.6875
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Sunshade/chajjas of 62.5mm thick slab using acro centering only river sand shall be used
2.36
-
1380
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge( clause 1000 & 1202 MORD &1100,1600 MORTH)
1.75
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.(TDSS 601&615)
8.32
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
27.26
-
6569.1
Reinforced brick masonary 115mm thick in super structure half brick thick in CM (1:4) prop.(Cement:Sand) using light weight clay Bricks from approved source having minimum crushing strength of 35 Kg/sq.Cm. and providing 75mm thick concrete band at every one metre interval including providing 2nos of 6mm/8mm rods in the band including cost and conveyance of all materials like sand, bricks, water etc., to site, including cost of seigniorage charges and all other taxes on all materials, scaffolding charges and all operational, incidental charges and labour charges like mixing cement mortar, lift charges, Construction of masonry, curing etc complete but including cost of Cement & steel and its fabrication charges for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
47.919999999999995
-
867.36
Ornamental plastering to ceiling and rcc surfaces exposed beams 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, all types of taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,fixing mesh, hacking, finishing, scaffolding, lift charges, all types of tools and plant and hire charges on machinery water hacking, water, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Ceiling rcc surfaces & Beams etc Plastering 2 coats in CM (1:3) & (1:5): 12 mm FOR GROUND FLOOR compolete for finished item of work and as directed by the engineer incharge as per drawing
122.89
-
473.8
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
109.01
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
219.53
-
485.3
Providing impervious coat For Water Storage Tanks , Toilets & RCC Retaining walls etc,. with Cement Mortar (1:3) prop. 20mm thick mixed with water proofing compound manufactured by reputed manufacturers like SIKA or FOSROC mixed as per the manufacturers specification,including pressure grouting, including cost and conveyance of materials like cement, sand, water proofing compound, water etc., to site, cost of seigniorage charges and all types of taxes on all materials, all Operational, including surface preparation removing all dust debris etc with pressure grouting ,incidental and labour charges for mixing mortar, laying, scaffolding and lift charges, rendering smooth finish and rounding off junctions of wall and floor, openings curing etc., as directed by the Engineer-in-charge complete for finished item of work at all Heights and levels in all floors. testing shall be done for water leakage and products used as per IS standards by the contractor at his own cost
91.93
-
509.3
Flooring with polished Shahabad stones 15 to 18 mm thick set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seignorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work,(TDSS 701&703)
102.10000000000001
-
657.1
Providing skirting to internal walls to 15 cm height/risers of steps with 15 to 18 mm thick polished Shahabad stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials like Shahabad stone, cement, sand and water etc to site, including all operational incidental and labour charges, scaffolding send lift charges, all types of taxes, all types of tools plants and machinery charges, including seignorage charges, finishing cutting cleaning, curing etc., complete for finished item of work.(TDSS 701&703)
20.7
-
976.5
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality confirming to IS:13711, IS:13712, IS:13630 (parts 1 to 15) of all shades, shapes texture design pattern approved by engineer in charge, set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and ceramic tiles to site etc., complete, including seignorage charges, including all operational incidental and labour charges, scaffolding and lift charges, all type of taxes, all types of tools and plants and machinery dressing cutting, finishing curing etc., complete for finished item of work, as directed by engineer in charge- FLOORING Flooring with non-skid ceramic tiles and not less than 7.3 mm thick in CM 1:8 Ground floor
1.8
-
831
Providing Dadooing to walls with ceramic tiles of all sizes and thickness of 6mm-8mm scratch free, stain free, Premium 1st quality confirming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour, design, texture, and finish pattern and shape in all shades and designs as approved by Engineer - in - charge and size not les than 300mm x x600mm and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like sand, water, tiles, etc. to site, including seignorage charges, all types of taxes, on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying in position for all types of design pattern and shape, curing, scaffolding and lift charges, all types of tools and plants and hire charges of machinery, etc., complete for finished item of work as directed by engineer in charge For Dadooing in toilets walls, and other areas etc at all heights and levels in ground floors
11.34
-
853.6
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision – (only 2 - glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.20 mm for outer frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co - extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work
3.6
-
7492.9
Supplying fabrication erection, Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered UPVC sections with glazing bead shall be co extruded with grey colour soft PVC having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mmx 2.4mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mmx2.4mm with reinforcement of 1 mm thickness (composition of profile shall consists a minimum of 5.5 PHR of Ti02 and not more than 12 PHR of caco2 for every 100 parts of PVS resin) Ventilator shall be provided with 5 mm high performance Pin Head glass, standard hardware, single point locking . Wall thickness of frame, mullion and sash shall be 2.4, including cost and conveyance of all materials, and accessories to site, all operational incidental and labour charges for transportation, fabrication, welding, erection at site with templates for casement sizing complete for finished item of work-For Ventilators (prelaminated type) including all types of taxes on all materials, lift and scaffolding charges, all types of tools and plants and hire charges of machinery, welding etc in all floors at all heights and levels. complete for finished item of work and as directed by the engineer in charge
0.27
-
6839.623
supplying fabrication erection and fixing ms grills for doors/windows/ventilators of all sizes/shape and design pattern as per approval and as directed by the engineer-in- charge including cost and conveyance of all materials to site and labour charges for fabrication, erction welding and fixing etc., complete for the finished item of work. using ms flats of all sections and thickness of hollow tube of all sizes rectangle/square/ ms flats, round tubes, m.s.square bars/solid bars of all shapes and sizes design and shapes at all floors and levels, including cost and conveyance of all materials to site, all types of taxes on all materials, all operational incidental and labour charges, all type of tools plants and hire charges of machinery, scaffolding and lift charges welding, fabrication fixing, curing etc and complete for finished item of work and as direted by the engineer incharge and as per drg(TDSS 1101&1102)
72
-
89.72744624999999
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door(TDSS1608)
1.89
-
11710.3
Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mmthick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick&
75mmwidesinglesideprelimPacsheetsshallbe for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specification and drawing.
1.58
-
2537
Supply and fixing of Rolling Shutters fabricated from 16 gauge steel sheet and machine rolled with 75mm rolling centres with effecting\ve bridge depth of 12mm lath sections inter locked with malleable cast iron chips. The guides shall be either rolled or pressed channel sections 75mm and 25mm wide fitted necessary fittings and fixtures. The suspension shaft shall be formed from solid drawn 8 gauge seamless tubes of about 60mm O.D.in 3 segments coupled with 2 pairs C.I.dog-railed flange coupling forming one complete unit eliminating deflection in the centre to a minimum. The springs shall be of approved high tensile flat springs 50/60mm width and 1.6/1.8mm thickness hardened and tempered. These shall be fitted inside the fabricated housing of either ends which counter balance the shutter. The ball bearings shall be double row self aligning ball bearings fitted inside C.I.housing fixed on side brackets holding the suspension shaft at either end. The suspension of the shutter curtain shall be bolted on specially fabricated cages formed from M.S.flats and plates all are welded.The hood cover shall be made of 16 gauge galvanized sheets with necessary stiffeners and framework to prevent sag.The bottom lock plate shall be made of 3mm thick M.S.plate and shall be 95mm wide reinforced with angle/T iron of suitable section with 6mm dia.M.S.rivets interlocked with last stride of curtain. The locking arrangements shall consist of hasp and staple on the bottom plate lockable from both sides. Rolling shutter shall be painted with one coat of red oxide zinc chromate paint confirming to I.S.2074 before they are fixed completed for finished item of work including cost and conveyance all materials , labour, taxes as per specifications and as directed. with mechanical device chain and crank operation for operating rolling shutter ms laths made of 80x1.25mm with 1.25mm thick top cover ( TDSS 1108)
14.4
-
4441.21035
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof(Apex Ultima exterior grade premium and 1st quality by Asian paints make), water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand colour design pattern texture and shade, of any colours and designs having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including sand papering (using emery paper with 180 and 320 emery paper), including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer in charge in all floor at all heights and levels (TDSS 911) for External walls and in all floors and at all heights and levels as per manufacturer specifications and should be anti dust, antibacteria, anti fungus water and weather resistance water proof with warranty and guaranty etc Specification shall be in lines with IGBC spec of low voc should be anti dust, antibacteria, anti fungus water and weather resistance water proof etc with warranty and gauranty as per manufacturer specification(TDSS 1201&1207&1216)
219.53
-
130.2
Painting to new internal walls and Ceiling with 2 coats of ready mixed Acrylic based oil bound wahsable distemper premium 1st quality of approved brand colour pattern, and shade over a base coat of appropriate primer of approved brand, should be anti dust, anti bacteria, anti fungus eyc, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site,all types of taxes on all materials, scaffolding and lift charges, cost of brushes, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc.,. complete for finished item of work as per SS 911 to interior faces of walls and ceiling in all floors. Specification shall be in lines with IGBC spec of low voc (as diected by engineer incharge in all floors at height and levels should be anti dust, anti bacteria, anti fungus etc as per manufacturers specifiations with warranty and gauranty(TDSS 1201&1207&1216)
231.89
-
119.8
Supplying providing erction laying and fixiong of Rain Water Down take pipes with PVC/SWR pipes of approved make of 110mm dia 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent ceement including chasing and cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges,all other types of taxes on all materials, all types of tools and plants and hire charges ogf machinery, testing and commissiong, curing etc complete for finished item of work as directed by engineer incharge in all heights and levels in all floors, including PVC couplers clips bends and shoes etc as per drawing
10.8
-
178.37555
SANITARY & PLUMBING:-Supplying and fixing PVC Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
3
-
387.88
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approvedmakeetc.completeforfinisheditemofwork in all respects: WhiteColour.
1
-
9118.74
Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
1
-
2513.62
Supplying and fixing CP finish brass Soap dish 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
1
-
590.12
Supplying and fixing mirror with plastic frame , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
1
-
554.44
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm dia withbrackets.including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
1
-
2157.09
S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931
1
-
849.39
Supplying and fixing Chrome plated bib cock cum health faucet with 1m long flexible tube and wall hook of Jaquar make queen series/Jupiter Aqua Lines-JAL or equivalent series as approved by Engineer-In-Charge with 7 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges , overheads & contractor profit complete for finished item of work in all floors.
1
-
3327.78
Supply & fixing of Stainless Steel Sink Size 36" x 18" (914.4x457.2mm) make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , Tap with 400 grams,overheads & contractors profit complete for finished item of work in all floors
1
-
7909.42
75mmdia (for Waste water):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
10
-
250.18
110mmdia (for soil waste):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
10
-
367
22.20mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
15
-
196.55
20mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
1
-
903.24
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
200
-
7.95
ELECTRICAL:-CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
5
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
20
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
30
-
80.52000000000001
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
5
-
35.144999999999996
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
20
-
702.9000000000001
CIRCUIT WIRING:-Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
37.68908
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
51.82408000000001
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
73.54908
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
5
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
6
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
3
-
601.26
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board].
Modular Switch,Socket,Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
3
-
876.2599999999999
LIGHT FIXTURES AND FANS:-Supply and transportation of Surface/Recess Mounted 12W LED down light slimline panel Light Housing made of Pressure die cast aluminium with Powder coated, round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 90 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc., complete with 50,000 burning hours. MAKE : PHILIPS / PANASONIC / CROMPTON / BAJAJ /HAVELLS /
4
-
740
Fixing of 12W/18W/36W/45W/60W led down light luminaire on Recess/ surface with all accessories including giving connections and all labour charges etc., complete.
4
-
156.60920000000002
Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
6
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
6
-
166.452
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
5
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
5
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
5
-
193.215
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
1
-
5852
STAFF QUARTERS-CIVIL WORK:-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
109.38000000000001
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
82.04
-
170.4
Supply and filling with red gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
44.19
-
210.4
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
15.17
-
4550.86
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
9.08
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Pedstals using acro centering
1.89
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
3.9699999999999998
-
12333.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
3.78
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc., complete including hire charges forcentering/shuttering/ deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Lintels beams using acro centering
0.61
-
12229.4
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 4.0m For Tie/Roof beams using acro centering
3.65
-
10600.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Roof slab using acro centering of 125mm thick slab
62.19
-
1264.6875
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Roof slab using acro centering of 150mm thick slab
10.64
-
1402.365
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Sunshade/chajjas of 62.5mm thick slab using acro centering only river sand shall be used RCC M 25 - Nominal Mix for Sunshades of 62.50mm thick with Drip Couse band of size 40mm x 20mm
4.71
-
1380
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-20 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Kitcehn [platform and Lofts using acro centering only river sand shall be used
12
-
606.5
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-20 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Racks shelves etc of 25mm finished thick using acro centering only river sand shall be used
21.96
-
447.3
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge(clause 1000&1202 MORD &1100,1600 MORTH)
2.13
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.(TDSS 601&615)
19.46
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
26.26
-
6569.1
Reinforced Brick masonry walls 115mm thick in super structure half brick thick in CM (1:4) prop.(Cement:Sand) using light weight clay Bricks from approved source having minimum crushing strength of 35 Kg/sq.Cm. and providing 75mm thick concrete band at every one metre interval including providing 2nos of 6mm/8mm rods in the band including cost and conveyance of all materials like sand, bricks, water etc., to site, including cost of seigniorage charges and all other taxes on all materials, scaffolding charges and all operational, incidental charges and labour charges like mixing cement mortar, lift charges, Construction of masonry, curing etc complete but including cost of Cement & steel and its fabrication charges for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
64.57000000000001
-
867.36
Ornamental plastering to ceiling and rcc surfaces exposed beams 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, all types of taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,fixing mesh, hacking, finishing, scaffolding, lift charges, all types of tools and plant and hire charges on machinery water hacking, water, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Ceiling rcc surfaces & Beams etc Plastering 2 coats in CM (1:3) & (1:5): 12 mm FOR GROUND FLOOR compolete for finished item of work and as directed by the engineer incharge as per drawing
153.88
-
473.8
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
198.39999999999998
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
224.10999999999999
-
485.3
Plastering 12 mm thick in single coat in CM (1:4) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plant and hire charges on machinery, and all operational, incidental and labour charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, hacking, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (TDSS 901,905) Dadoing & cladding areas GROUND FLOOR as per drg
31.69
-
189
Providing impervious coat For Water Storage Tanks , Toilets & RCC Retaining walls etc,. with Cement Mortar (1:3) prop. 20mm thick mixed with water proofing compound manufactured by reputed manufacturers like SIKA or FOSROC mixed as per the manufacturers specification,including pressure grouting, including cost and conveyance of materials like cement, sand, water proofing compound, water etc., to site, cost of seigniorage charges and all types of taxes on all materials, all Operational, including surface preparation removing all dust debris etc with pressure grouting ,incidental and labour charges for mixing mortar, laying, scaffolding and lift charges, rendering smooth finish and rounding off junctions of wall and floor, openings curing etc., as directed by the Engineer-in-charge complete for finished item of work at all Heights and levels in all floors. testing shall be done for water leakage and products used as per IS standards by the contractor at his own cost
99.02000000000001
-
509.3
Supplying laying fixing in Flooring with Vitrified tiles full body double charged stain free,scratch free of size 800 x 800 mm not less than 8 to 10mm thick premium colour 1st quality of all types of shape, design shade colour design pattern, texture, finish and ,as approved by Engineer of all sizes Thickness not less than 8-18 mm confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) set over a base coat of CM (1:8) prop. 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, shape, design pattern, levelling to perfect level, scaffolding and lift charges, all operational, incidental and labour charges, all types of tools plant and hire charges of machinery all types of taxes, lead and lift charges curing wtc as directed by the Engineer-in-charge curing etc., complete for finished item of work. (TDSS No.707 & 701)----FLOORING Floring with vitrified tiles 8 to 10mm thick in CM 1:8 premium colour 1st quality Ground floor (base coat in cm and size of tile is 800x800mm)
55.1
-
1256.1
Supplying providing and laying of Skirting with Vitrified tiles full body double charged stain free, scratch free of premium colour of first quality make , of all shapes, design, shade, finish, pattern, texture and colour as approved by Engineer of all sizes, 8-12mm thick confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) to internal walls for 100 mm height with length equal to flooring tiles and matching the flooring joint lines and set over 12mm thick base coat of CM (1:3) prop. and neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per sq.mt and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles,skirting shall be flushed to the wall surface with a groove between wall and tile , including cost and conveyance of all materials like cement, sand, water, Vitrified tiles, white cement etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plants and hire charges of machinery, cost of base coat, all operational incidental and labour charges for mixing of cement mortar, laying tiles to required shape design, pattern, slope leveling to perfect level, scaffolding and lift charges, curing etc., complete for finished item of work (TDSS No 707 & 701) at All heights and levels in all floors, as directed by the Engineer.
6.73
-
1270.9
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality confirming to IS:13711, IS:13712, IS:13630 (parts 1 to 15) of all shades, shapes texture design pattern approved by engineer in charge, set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and ceramic tiles to site etc., complete, including seignorage charges, including all operational incidental and labour charges, scaffolding and lift charges, all type of taxes, all types of tools and plants and machinery dressing cutting, finishing curing etc., complete for finished item of work, as directed by engineer in charge- FLOORING Flooring with non-skid ceramic tiles and not less than 7.3 mm thick in CM 1:8 Ground floor
8.6
-
831
Providing Dadooing to walls with ceramic tiles of all sizes and thickness of 6mm-8mm scratch free, stain free, Premium 1st quality confirming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour, design, texture, and finish pattern and shape in all shades and designs as approved by Engineer - in - charge and size not les than 300mm x x600mm and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like sand, water, tiles, etc. to site, including seignorage charges, all types of taxes, on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying in position for all types of design pattern and shape, curing, scaffolding and lift charges, all types of tools and plants and hire charges of machinery, etc., complete for finished item of work as directed by engineer in charge For Dadooing in toilets walls, and other areas etc at all heights and levels in ground floors
38.199999999999996
-
853.6
Flooring with polished Shahabad stones 15 to 18 mm thick set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seignorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work,(TDSS 701&703)
7.92
-
657.1
Providing skirting to internal walls to 15 cm height/risers of steps with 15 to 18 mm thick polished Shahabad stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials like Shahabad stone, cement, sand and water etc to site, including all operational incidental and labour charges, scaffolding send lift charges, all types of taxes, all types of tools plants and machinery charges, including seignorage charges, finishing cutting cleaning, curing etc., complete for finished item of work.TDSS 701&703
16.41
-
976.5
Flooring with 16 to 18mm thick of 2.43m length high polished granite stone slabs of Jet black colour with premoulded prepolished (high mirror polish) machine cut of any design texture and shape as approved by the engineer-in charge laid over RCC slab or bed already laid and set over base coat of CM (1:8) 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and joined with neat white cement paste mixed with pigment of matching shade to full depth,including providing provision for wash basin ,taps and sink including cost and conveyance of and all materials like cement, sand, water and slab/tiles etc to work site and including all seignorage charges, operational , incidental, labour and lift charges, laying, rubbing, full moulding, dressing and polishing to edge to give high gloss finish of granite slabs/tiles etc., complete for finished item of work for kitchen platform/pantry/vanity counters/sill slabs etc (SS 701 & special)
2.48
-
4911.5
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision – (only 2 - glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.20 mm for outer frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co - extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work
13.995000000000001
-
7492.9
Supplying fabrication erection, Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered UPVC sections with glazing bead shall be co extruded with grey colour soft PVC having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mmx 2.4mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mmx2.4mm with reinforcement of 1 mm thickness (composition of profile shall consists a minimum of 5.5 PHR of Ti02 and not more than 12 PHR of caco2 for every 100 parts of PVS resin) Ventilator shall be provided with 5 mm high performance Pin Head glass, standard hardware, single point locking . Wall thickness of frame, mullion and sash shall be 2.4, including cost and conveyance of all materials, and accessories to site, all operational incidental and labour charges for transportation, fabrication, welding, erection at site with templates for casement sizing complete for finished item of work-For Ventilators (prelaminated type) including all types of taxes on all materials, lift and scaffolding charges, all types of tools and plants and hire charges of machinery, welding etc in all floors at all heights and levels. complete for finished item of work and as directed by the engineer in charge
0.72
-
6020
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door(TDSS 1107)
7.88
-
11710.3
Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mmthick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick&
75mmwidesinglesideprelimPacsheetsshallbe for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specification and drawing.
3.15
-
2537
supplying fabrication cutting erection providing and fixing of MS Pipe mesh//gratings/grill/railing etc as per approved colour shape and pattern design as per drg made of Hollow tubes and channels, plates etc including welding grinding buffing polishing finishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the mesh/grating/grill/ railing with necessary accessories and MS steel dash fasteners stainless steel bolts etc of required size on the top of the floor or the side of slab with suitable arrangement as per approval of engineer in charge ( for payment purpose only weight of Mild steel members shall be considered including fixing accessories such as nuts bolts fasteners etc including cost and conveyance of all material like stainless steel 304 grade welding rods water etc to site, all labour operational and incidental charges, all types of taxes on al materials, all types of tools and plants and hire charges of machinery, lift and scaffolding charges, fabrication, cutting, and erection at site, welding, curing etc complete for finished item of work as directed by the engineer in charge for all floors at all heights and levels as per drg
236.3
-
104.47
supplying fabrication erection and fixing ms grills for doors/windows /ventilators of all sizes/shape and design pattern as per approval and as directed by the engineer-in- charge including cost and conveyance of all materials to site and labour charges for fabrication, erction welding and fixing etc., complete for the finished item of work. using ms flats of all sections and thickness of hollow tube of all sizes rectangle/square/ ms flats, round tubes, m.s.square bars/solid bars of all shapes and sizes design and shapes at all floors and levels, including cost and conveyance of all materials to site, all types of taxes on all materials, all operational incidental and labour charges, all type of tools plants and hire charges of machinery, scaffolding and lift charges welding, fabrication fixing, curing etc and complete for finished item of work and as direted by the engineer incharge and as per drg(TDSS 1101&1102)
290.7
-
89.72744624999999
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof(Apex Ultima exterior grade premium and 1st quality by Asian paints make), water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand colour design pattern texture and shade, of any colours and designs having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including sand papering (using emery paper with 180 and 320 emery paper), including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer in charge in all floor at all heights and levels (TDSS 1201&1201) for External walls and in all floors and at all heights and levels as per manufacturer specifications and should be anti dust, antibacteria, anti fungus water and weather resistance water proof with warranty and guaranty etc Specification shall be in lines with IGBC spec of low voc should be anti dust, antibacteria, anti fungus water and weather resistance water proof etc with warranty and gauranty as per manufacturer specification
224.10999999999999
-
130.2
Painting to new internal walls and Ceiling with 2 coats of ready mixed Acrylic based oil bound wahsable distemper premium 1st quality of approved brand colour pattern, and shade over a base coat of appropriate primer of approved brand, should be anti dust, anti bacteria, anti fungus eyc, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site,all types of taxes on all materials, scaffolding and lift charges, cost of brushes, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc.,. complete for finished item of work as per SS 911 to interior faces of walls and ceiling in all floors. Specification shall be in lines with IGBC spec of low voc (as diected by engineer incharge in all floors at height and levels should be anti dust, anti bacteria, anti fungus etc as per manufacturers specifiations with warranty and gaurantyTDSS 1201&1201
352.27
-
119.8
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
42.3
-
181.7
Supplying providing erction laying and fixing of Rain Water Down take pipes with PVC/SWR pipes of approved make of 110mm dia 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent cement including chasing and cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges, all other types of taxes on all materials, all types of tools and plants and hire charges of machinery, testing and commission, curing etc complete for finished item of work as directed by engineer in charge in all heights and levels in all floors, including PVC couplers clips bends and shoes etc as per drawing using reducer of 200mm to 150 mm dia ,shoe and bends with column of same strength.
14.4
-
178.37555
SANITARY & PLUMBING:-Supplying and fixing PVC Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
6
-
387.88
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approvedmakeetc.completeforfinisheditemofwork in all respects: WhiteColour.
2
-
16974.08
Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
2
-
3996.52
Supplying and fixing CP finish brass Soap dish 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
590.12
Supplying and fixing mirror with plastic frame , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
554.44
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm dia withbrackets.including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
2
-
2157.09
S&F of powder coated brass body finish Towel ring premium make with 10 years warrantyscrews including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
2
-
2157.09
S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931.
2
-
849.39
Supplying and fixing Chrome plated bib cock cum health faucet with 1m long flexible tube and wall hook of Jaquar make queen series/Jupiter Aqua Lines-JAL or equivalent series as approved by Engineer-In-Charge with 7 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges , overheads & contractor profit complete for finished item of work in all floors.
2
-
3327.78
Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty Jaquar/Hindware.
2
-
3387.09
Supply & fixing of Stainless Steel Sink Size 36" x 18" (914.4x457.2mm) make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , Tap with 400 grams,overheads & contractors profit complete for finished item of work in all floors
1
-
7909.42
75mmdia (for Waste water):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
20
-
250.18
110mmdia (for soil waste):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
10
-
367.01
110mmdia (for Rain water):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
10
-
367.01
22.20mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
20
-
196.55
28.60mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
10
-
235.18
34.90mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
20
-
320
25mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
3
-
1292.94
32mm Nominal bore;-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
1
-
1942
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
1000
-
7.95
ELECTRICAL:-CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
10
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
50
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
120
-
80.52000000000001
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
5
-
35.144999999999996
POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
30
-
702.9000000000001
CIRCUIT WIRING:-Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
30
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
30
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
37.68908
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
51.82408000000001
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
10
-
73.54908
PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
9
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
12
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
3
-
601.26
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board].
Modular Switch,Socket,Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
3
-
876.2599999999999
LIGHT FIXTURES AND FANS:-Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
8
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
8
-
166.452
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 9W LED bulb
10
-
299.2
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
5
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
5
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
5
-
193.215
DISTRIBUTION BOARDS:-Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for singile phase 12 Nos S.P out goings and for 1No Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A DP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 10 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
1
-
5852
CANTEEN-CIVIL WORK:-Earth Work Excavation for Foundations and Depositing on bank, for all lifts and with an initial lead of 10m including all incidental, operational, labour charges such as shoring, sheeting, planking, strutting, pumping, dewatering Dressing, ramming and compacting, under water liquid mud, site clearance, clearing shurbs, brushwood, under growth and small trees not exceeding 300 mm girth, measured at one metre above ground etc., complete for finished item of work including dewatering charges etc as per SS - 20 B for stiff block cotton soil , clayey soils, hard red earth, murram, ordinary gravel, stoney earth and earth mixed with fare size boulders, soft disintegrated rock like shales - mechanical means up to 3m depth - including all operational , incidental and labour charges, including machinery hire charges, seignorages charges, including all tools and plants, all types of taxes, watering compacting, dressing, etc. complete for finished item of work. Foundation of Building (TDSS 308). Ordinary Soil - Mechanical Means up to 3m depth - Foundation of Buildings
38.3
-
185.4
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the base and sides of all foundations, internal & external vertical and horizontal faces of the walls columns, plinth beams, basement and top surface of the basement filling below flooring bed all side ofjoinery openings, as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge anti termite treatment ( includingcost and conveyance of all materials to site, including all incidental operational and labour charges, all types of taxes, all type of tools and plants machinery hire charges, all leads and lifts etc complete for finished item of work and as directed by the engineer incahrge ( should be done by specialist with warranty and guaranty for 10 years (only plinth area of building to measured at ground floor only)
117.6
-
170.4
Supply and filling with red gravel/ morrum from approved source in layers not more than 150mm thick and hydraulically consolidated, in plinths, pits, foundations, basement and other purposes, etc. including cost and conveyance of all materials to site like gravel/morrum, including consolidating each deposited layer by 40 tons power roller compactors, dressing, watering and ramming consolidating up to OMC 95-98% (proctor density as per morth specifications) ,including testing 5-6nos at every 400cum in each layers including all operational, incidental, labour charges, seignorage charges, all types of taxes , hire charges of T & P and machinery, watering, lead and lift charges etc., complete for finished item of work. as directed by the engineer in charge. after approval of each layer, then only next layer should be started cost of testing shall be born by the contractor (TDSS NO. 309 & 310)----Filling with carted gravel)
64.11
-
210.4
Providing Plain cement concrete in (1:4:8) proportion for foundations and under flooring using 40mm size (SS5) hard granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water to site, including cost of centering and shuttering charges, de-shuttering charges, excluding seigniorage charges, all incidental, operational and labour charges, all types of taxes, including all charges for machine mixing, laying compacting, ramming, placing and vibrating to required level,all depths all lead and lift charges, all type of tools and plant, hire charges of machinery, water, finishing top surface to required level, curing etc., complete for finished item of work and as directed by engineer in charge (TDSS No 402 for mchine mixing-PCC (1:4:8) Nominal mix for foundation and flooring
15.049999999999999
-
4550.86
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Footings using acro centering
2.4
-
7711.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
1.3
-
8289.9
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Cols using acro centering
2.5399999999999996
-
12333.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Plinth Beams using acro centering
3.69
-
10236.8
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc., complete including hire charges forcentering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Lintels beams using acro centering
0.79
-
12229.4
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 4.0m For Tie/Roof beams using acro centering
3.1399999999999997
-
10600.3
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Sunshade/chajjas of 62.5mm thick slab using acro centering only river sand shall be used RCC M 20 - Nominal Mix for Sunshades of 62.50mm thick with Drip Couse band of size 40mm x 20mm
20.57
-
1380
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Kitcehn [platform and Lofts using acro centering only river sand shall be used
10
-
606.5
Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 corresponding to Table 9 of IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, including all types of taxes on all materials including all operational, incidental and labour charges ,such as weigh batching, machine mixing, laying concrete, all types of tools and plants and hir4 charges of machibery, curing etc.,complete including hire charges for centering/shuttering/deshuttering and scaffolding all leads and lifts using steel sccaffolding pipes, adjustable jack screw props and acro span using steel centering plates etc for unsupported height of 3.66M but excluding cost of steel and its fabrication charges for finished item of work (TDSS No. 402, 403) with minimum cement content as per IS code including pumping, centering, shuttering, de shuttering laying concrete, vibrating, curing etc. complete for finished item of work. and as directed by engineer incharge, Design Mix : M-25 (Weigh Batch) Centering with Steel props and plates upto 3.66m For Racks shelves etc of 25mm finished thick using acro centering only river sand shall be used
7.2299999999999995
-
447.3
Supplying , Providing cutting fabrication erection fixing and placing High Yield Strength Deformed steel bars/TMT (Fe 500/550 grade as per IS 1786-1979) of different diameters and sizes for RCC works ,manufactured by SAIL/VSP/ TATA/JSW, including labour charges for cutting, bending to required sizes and shapes, cutting fabrication erection and placing in position with cc/ pvc cover blocks of approved materials and size and tying with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of all materials reinforcement steel bars, cover blocks, anti corrosive paint etc to site, including all wastages such as overlaps, couplings/couplers (of approved make of all dia), welded joints, chairs, spacer bars including cost and conveyance of binding wire welding rods etc to site, and all incidental, operational, labour charges such as fabrication, cutting, bending, fixing, placing in position, tying including all types of taxes on all materials, scaffolding and lift charges, all tools and plant, hire charges of machinery, etc., complete for finished item of work in all floors at all heights and levels as directed by engineer in charge(clause 1000&1202 MORD &1100,1600 MORTH)
1.21
-
49319.8
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit, excluding seigniorage charges complete for finished item of work in foundation and basement.(TDSS 601&615)
32.65
-
4407.5
Brick masonry 230mm thick for panel walls in super structure with Cement Mortar (1:6) proportion (cement : sand) using light weight clay burnt bricks from approved source having minimum crushing strength of 35 Kg/Sq.Cm including cost and conveyance of all materials like cement sand, bricks, water etc. to site, cost of seigniorage charges and all other taxes on all materials, and all operational, incidental charges and labour charges like mixing cement mortar, scaffolding charges, lift charges, all types of tools plants and hire charges on masonry, construction of masonry, curing etc., complete , for finished item of work as per specification and as directed by the engineer in charge. (TDSS No. 501 & 504)
51.269999999999996
-
6569.1
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc exculding seigniorage charges complete for finished item of work for internal Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg Internal faces
183.36
-
455.8
Plastering 20 mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge/smooth finishing including cost and conveyance of all materials like cement, sand, water, mesh etc to site., seigniorage charges, all types of taxes on all materials, including supplying and fixing of the wire mesh at the RCC Masonry junctions during plastering, including all operational, incidental charges and labour charges for mixing mortar, mesh, hacking,finishing, scaffolding, lift charges, curing, etc, all types of tools and plants and hire charges of machinery, including cutting Grooves 12x12mm where ever necessary curing etc complete for finished item of work for External Even Surfaces of masonry Walls and rc exposed faces at all heights and levels in all floors, as directed by Engineer in charge (SS 901,903 & 904) for:-Plastering 2coats in CM (1:4) & (1:6): FOR GROUND FLOOR complete for finishd item of work and as directed by engineer incharge as per drg
227.66
-
485.3
Supplying laying fixing in Flooring with Vitrified tiles full body double charged stain free,scratch free of size 800 x 800 mm not less than 8 to 10mm thick premium colour 1st quality of all types of shape, design shade colour design pattern, texture, finish and ,as approved by Engineer of all sizes Thickness not less than 8-18 mm confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) set over a base coat of CM (1:8) prop. 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, shape, design pattern, levelling to perfect level, scaffolding and lift charges, all operational, incidental and labour charges, all types of tools plant and hire charges of machinery all types of taxes, lead and lift charges curing wtc as directed by the Engineer-in-charge curing etc., complete for finished item of work. (TDSS No.707 & 701)----FLOORING Floring with vitrified tiles 8 to 10mm thick in CM 1:8 premium colour 1st quality Ground floor (base coat in cm and size of tile is 800x800mm)
71.63
-
1256.1
Supplying providing and laying of Skirting with Vitrified tiles full body double charged stain free, scratch free of premium colour of first quality make , of all shapes, design, shade, finish, pattern, texture and colour as approved by Engineer of all sizes, 8-12mm thick confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) to internal walls for 100 mm height with length equal to flooring tiles and matching the flooring joint lines and set over 12mm thick base coat of CM (1:3) prop. and neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per sq.mt and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles,skirting shall be flushed to the wall surface with a groove between wall and tile , including cost and conveyance of all materials like cement, sand, water, Vitrified tiles, white cement etc., to site, excluding seigniorage charges, all types of taxes on all materials, all types of tools and plants and hire charges of machinery, cost of base coat, all operational incidental and labour charges for mixing of cement mortar, laying tiles to required shape design, pattern, slope leveling to perfect level, scaffolding and lift charges, curing etc., complete for finished item of work (TDSS No 707 & 701) at All heights and levels in all floors, as directed by the Engineer.
14.33
-
1270.9
Flooring with polished Shahabad stones 15 to 18 mm thick set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seignorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work,(TDSS 701&703)
36.66
-
657.1
Supplying laying fixing in Flooring with Vitrified tiles full body double charged stain free,scratch free of size 800 x 800 mm not less than 8 to 10mm thick premium colour 1st quality of all types of shape, design shade colour design pattern, texture, finish and ,as approved by Engineer of all sizes Thickness not less than 8-18 mm confirming to IS: 13711, IS:13712, IS:13630 ( parts 1 to 15) set over a base coat of CM (1:8) prop. 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and filling the joints with white cement paste mixed with pigment of matching shade to match the shade of tiles grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope, shape, design pattern, levelling to perfect level, scaffolding and lift charges, all operational, incidental and labour charges, all types of tools plant and hire charges of machinery all types of taxes, lead and lift charges curing wtc as directed by the Engineer-in-charge curing etc., complete for finished item of work. (TDSS No.707 & 701)----FLOORING Floring with vitrified tiles 8 to 10mm thick in CM 1:8 premium colour 1st quality Ground floor (base coat in cm and size of tile is 800x800mm)
36.66
-
976.5
Flooring with 16 to 18mm thick of 2.43m length high polished granite stone slabs of Jet black colour with premoulded prepolished (high mirror polish) machine cut of any design texture and shape as approved by the engineer-in charge laid over RCC slab or bed already laid and set over base coat of CM (1:8) 20mm thick including neat cement , slurry of honey like consistency spread at the rate of 3.30kg per sqm and joined with neat white cement paste mixed with pigment of matching shade to full depth,including providing provision for wash basin ,taps and sink including cost and conveyance of and all materials like cement, sand, water and slab/tiles etc to work site and including all seignorage charges, operational , incidental, labour and lift charges, laying, rubbing, full moulding, dressing and polishing to edge to give high gloss finish of granite slabs/tiles etc., complete for finished item of work for kitchen platform/pantry/vanity counters/sill slabs etc (SS 701 & special)
7.2299999999999995
-
4911.5
supplying fabrication erection and fixing ms grills for doors/windows/ventilators of all sizes/shape and design pattern as per approval and as directed by the engineer-in- charge including cost and conveyance of all materials to site and labour charges for fabrication, erction welding and fixing etc., complete for the finished item of work. using ms flats of all sections and thickness of hollow tube of all sizes rectangle/square/ ms flats, round tubes, m.s.square bars/solid bars of all shapes and sizes design and shapes at all floors and levels, including cost and conveyance of all materials to site, all types of taxes on all materials, all operational incidental and labour charges, all type of tools plants and hire charges of machinery, scaffolding and lift charges welding, fabrication fixing, curing etc and complete for finished item of work and as direted by the engineer incharge and as per drg(TDSS 1101&1102)
460.8
-
89.72744624999999
Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 77,finish painted with a polyester paint, section for outer frame of 46 x 52 mm section forshutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard
bars @ 150 mm pitch for Windows: Double shutter with Mullion section for sizes 4'-6 x 4 '-6 (1371.6x1371.6mm) 5'-0 x 4'- 0 (1524x1219.2mm) and 6'-0 x 4'- 0 (1828.8x1219.2mm) (1828.8x1371.6mm) (TBSC-M.I-04)
23.04
-
6779.4
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer toreceive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give therequired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf DoorTDSS 1107
4.2
-
11710.3
Painting to new walls with 2 or more coats of Acrylic Emulsion weather proof,water based, modified acrylic with Silicon Additives Exterior of superior grade premium 1st quality of approved brand and shade, of any colours and deisign having VOC content less than 50 grams/litre over primer coat using white cement as approved by Engineer-In-Charge, making 3 or more coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, lift charges all types of taxes on all materials, all types of tools plants and hire charges on machinery curing etc.,complete for finished item of work as per direction of engineer incharge in all floor at all heights and levels (TDSS 1201&1216) for External walls and in all floors and at all heights (asian/burger/nerolas british or equivalent manufacturer should be anti dust,anti bacteria, anti fungus water and weather resistance water proof etc
227.66
-
130.2
Supplying providing and applying of Painting to new walls 2 coats of ready mixed Oil bound washable distemper (Acrylic Based) of approved brand of all colour pattern design and shade over a base coat of appropriate distemper primer of approved brand making including two or more coats of white cement based putty of approved brand and manufacture to prepare surface even and smooth 3 coats in all to give an even shade after brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site, all types of taxes on all materials, scaffolding and lift charges, cost of brushes,, preparing the wall surfaces and all operational, incidental, labour charges etc, all types of tools plants and hire charges on machinery, curing etc., complete for finished item of work to interior faces of walls and ceiling in all floors. Speficiation shall be in lines with IGBC spec of low voc (asia/buegr/nerolac/british paints manufacturers should be anti dust,anti bacteria, anti fungus etc(TDSS 1201&1216)
183.36
-
119.8
Supplying and applying Painting to iron work with 2 coats of grade-1 ready mixed Synthetic enamel paint of approved brand and all colours design pattern and shade over a base coat of appropriate grade-1 Red Oxide primer of approved brand making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all remains, sand papering, putty, cleaning of the surface for dust etc including cost and conveyance of all materials to work site, cost of brushes, putty sand papers and all operational, incidental, labour charges, all types of tools and plants and hire charges on machinery, all types of taxes on all materials, scaffolding and lift charges, curing etc., complete for finished item of work as directed by engineer incharge at all heights and levels in all floors. Ground floor and first floor Specification shall be in lines with IGBC spec of low voc (TDSS no 1201,1207,1212)
51.84
-
181.7
Supplying providing erction laying and fixing of Rain Water Down take pipes with PVC/SWR pipes of approved make of 110mm dia 4kgs/sqcm confirming to is: 13592-1992 with necessary upvc pipe clips @ 1.5m intervals and jointed with solvent ceement including chasing and cutting of walls and floors and making the same good including necessary specials/ fittings such as PVC bends, shoes, iron clamps and all other accessories and fixing in position, including cost and conveyance of all materials to site all incidental operational and labour charges, scaffolding charges, lift charges,all other types of taxes on all materials, all types of tools and plants and hire charges ogf machinery, testing and commissiong, curing etc complete for finished item of work as directed by engineer incharge in all heights and levels in all floors, including PVC couplers clips bends and shoes etc as per drawing 110mm dia
14.4
-
178.37555
Supplying erection and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel percolated GI wall angle of size 25 mm x 25 mm x of 0.40 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using percolated GI Tee section (24 mm x 38 mm x 0.3 mm) & Cross T of 600 mm of ( 24 x 28 mm x 0.30 mm ) Cepro Make from soffit at 1220 mm c/c fixed with GI Soffit slotted Cleat, to the GI T section with 4 mm dia GI adjustable Rod wire with galvanized spring steel level clip/j bolt at 600 mm c/c and fixing the 12.5 mm / 9.5 mm laying false ceiling tiles/Gypboard Sheet tiles of approved texture in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc, of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall top coat complete for finished item of work as per specification. including cost and conveyance of all materials like water tiles gi sections etc, all incidental operational and labour charges, scaffolding and lift charges, all types of tools and plants and hire charges of machinery, all types of taxes on all materials all shapes texture and sizes etc complete for finished item of work as directed by the engineer in charge at all heights and levels in all floors as per drawing in lab
71.63
-
1214.9
Supplying welding, cutting, fabrication and erection of structural steel work in built up tubular (round square or rectangular hollow tubes etc) for Cols, Beams,Rafters,Trusses,Purlins,Tie Runners, bracings, insert plates, gusset plates, rails, gantry girders including all accessories ,etc at all heights and levels, elevation including cost and conveyance of all materials like tubular steel to site, Welding rods, including surface treatment for removal of rust, scales etc on surfaces, Using different types emry sand papers ,cleaning and including all incidental operational, labour charges, lift and scaffolding charges, one coat of premium 1st quality red oxide primer paint, special putty as per standards, Anticorrosive Painting premium 1st quality to Steel with 2 coats of ready mixed premium 1st quality Grade-I Synthetic enamel paint of approved colour texture brand and shade,including all types of tools and plants and the machinery hire charges, cranes, consumables required for the cutting fabrication transportation to site and erection, welding works, all types of taxes on all materials, testing and commissioning etc., complete for finished item of work and as directed by engineer in charge and finishing , at all heights and levels in all floors, necessary shop drawing to be prepared by the contractor submitted for approval by the consultants as IS standards as per drawing
1705.36
-
130.71
Supply & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular
Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours(TDSS 814)
144.26
-
439.7
SANITARY & PLUMBING:-Supplying and fixing PVC Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
10
-
387.88
Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 gramsSeiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block with single CP pillarcock.
5
-
3996.52
Supplying and fixing CP finish brass Soap dish 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
590.12
Supplying and fixing mirror with plastic frame , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
554.44
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm dia withbrackets.including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
5
-
2157.09
S&F of 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931
3
-
849.39
Supply & fixing of Stainless Steel Sink Size 36" x 18" (914.4x457.2mm) make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , Tap with 400 grams,overheads & contractors profit complete for finished item of work in all floors
2
-
7909.42
75mmdia (for Waste water):-Supplying and fixing of SWR PVC pipes (Prince/ Sudhakar /Kisan/ Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
30
-
250.18
22.20mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
20
-
196.55
28.60mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
15
-
235.18
34.20mm OD pipe:-Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
20
-
320.39
25mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
3
-
1292.94
32mm Nominal bore:-Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-I, Indian make heavy type including cost and conveyance of all materials , labour charges, overheads & contractors profit complete for finished item of work.
1
-
1956.45
Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
2000
-
7.95
ELECRICAL:-CONDUITING:-Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) surface P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Modi ( ISI mark).
40
-
88.67649999999999
Supply and Fixing of 25mm outer dia heavy (2.10mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for run of mains / circuit mains, power plugs,computer boards including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
40
-
95.997
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
75
-
80.52000000000001
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
5
-
35.144999999999996
'POINT WIRING:-Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
45
-
702.9000000000001
'CIRCUIT WIRING:-Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
60
-
75.24154000000001
Supply and run of 1 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
60
-
27.45908
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
40
-
114.224
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
40
-
37.68908
Supply and run of 1 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
73.54908
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
-
315.348
Supply and run of 4 of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable in existing pipe for mains including all labour charges etc., complete. Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
5
-
451.748
'PLUG AND SOCKETS:-Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
5
-
458.9354
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
4
-
676.7933333333333
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
10
-
601.26
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board].
Modular Switch,Socket,Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
2
-
876.2599999999999
LIGHT FIXTURES AND FANS':-Supply and transportation of 20W, 2000 lumins, 1200mm length LED retrofit tube light, housing made with aluminium anodised body, wide operating voltage with double side connection, PF- 0.9, Surge protection 2KV, THC15%, with inbuilt driver and frosted cover CCT; 3000K- 6000K s desired by the department and as per IS Specifications, minimum CRI80etc complete with 50000 burning hours with BIS Certification. LUMINAIRE MAKE : PHILIPS / CROMPTON/PANASONIC
VIN / Bajaj / Havells / Halonix
22
-
803
Fixing of 20W/18W led tube light luminaire on wall / Ceiling with / TW /PVC round blocks with all accessories including giving connections and all labour charges etc., complete.
22
-
166.452
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling
Fan without Regulator.
Makes : Crompton High Speed Decora / Orient Summer Crown
12
-
2327.5449999999996
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete.
Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
12
-
1986.6
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
12
-
193.215
Supply of 18" (450mm) heavy duty exhaust fan with
wire guard etc complete etc., complete.
Makes : Crompton / Bajaj Bahar WG / Havells Ventil
Air-DB / Orient hill air.
2
-
4843.96
Labour charges for fixing of Exhaust fan in wall with necessary connections etc., complete ( for hole already made available).
2
-
352.98999999999995
'DISTRIBUTION BOARDS:-Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete.Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 NosDB Makes : Legrand / Schneider.Isolator Make: Legrand-DX3 / Schneider-Acti9.MCB ake:Legrand-DX3 / Schneider-Acti9.
1
-
8472.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements