South Central Railway Tender

Supply and Installation 6 mm thick HPL sheets for Elevations and Ceilings at heights upto Seven storied building using single / both side decorative EN 438- Part 6 complying of Fundermax or equivalent make manufactured under high pressure and temperatur in a hot press. The cladding / ceiling system will have to be installed over powder coated aluminium box section 50 x 25 x 1.5mm thick frame work using aluminium POP rivets for fastening purpose (with appropriate sliding and fixed holes). 'L' type hot dip galvanized MS bracket 50 x 50 x 5 1 mm to hold the aluminium box sections anchored by standard anchor fasteners. The core of the panel shall consists of desired numbers of imported, long fibre virgin kraft papers, impregnated with specially formulated double hardened Phenolic resin and another top layer of imported virgin Blue wool scale passed, decorative paper layer impregnated with Melamine resin. The panels are flame retardant type of class 1 as per BS: 476 Part 7, ASTM E84 and EN 438- Part 6. Polymethyl methacrylate UV protecting films are provided at the top of the Deco layer for optimum UV protection (passes 1500 hours). The HPL panels shall have a tested Flexural Modulus of >11,000 MPa and Flexural strength of >100 MPa to make the product enormously sturdy from inside. The product shall not show any distortion even in extreme climatic conditions of -20 C to +80°C and in dry climate conditions with relative humidity in excess of 85% - 90%. HPL panels should be weather resistant at extreme oceanic climates and should have passed the salt spray test conducted for 500 hours and 3000 hours artificial weathering rated with a 5 for Grey scale rating & 7 /8 for Blue wool rating with all contractor's materials, powder coated aluminium frame work, fasteners, rivets, labour, scaffolding, transportation, tools, plant, machinery, etc complete as per the directions of the Engineer in charge.(Rate applicable up to 7 storied building).

Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of NEXION SINTERED FACADE PANEL SUITABLE FOR EXTERIOR FACADE APPLICATION with NEXION SINTERED tiles of size 800 mm x 1600mm x 6 mm. of color finish Approved by Client / Architect including all necessary frame work complete as per Drawing. Tile cladding System with open joint system designed to withstand the design wind pressure. (The system must pass the proof test at 1.5 times design wind pressure without any failure) The Tile shall be fixed on Extruded Aluminium vertical T profile. and T profile to be fixed to L bracket using SS nut bolt and HDG 'L' bracket shall be fixed to MS .structure/RCC structure using Anchor fastener make Hilti SS 316 grade with all other 2 necessary accessories. The Bracket support shall be designed to accommodate 3 Dimensional movement for achieving perfect verticality and with proper fixing of NEXION Cladding . A horizontal L strip is to be used as horizontal support to take the gravitational load of Nexion sintered facade panels. The structure sealant DOW 995 /795 to be used along with Double sided tape of 12mm with 2.8 mm thick. The fastening materials like Nuts, Bolts, Rivets, washers, clamps, straps etc along with all consumables and accessories required for fixing the Sinterd Tile cladding system shall be of corrosion resistant of approved make as per architects/Consultants Specification. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory. The rate of the item is including all material, Labour, lead ,lift and transportation and all taxes.

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing arrangement and making necessary holes etc. for fixing required Ozone or similar SS fittings, all complete as per direction of Engineer-in-charge.

Supplying, Providing and Fixing of Sliding Glass doors of 12mm thick toughened glass with all edges completely polished with cut outs to accommodate Rollers, locks and handles, with all required fittings 4 Similar to SL-44-A2-Kit (Make OZONE) Consists of OZ-SL- 44-A2-Rollers for 80Kg=2Nos,Stopper OZ-SL-44- A3=2pcs, Floor Guide OSL-33_G =1pcs and Top Track similar to Model No.Track- OZ-SL-44-B1 of OZONE make, Sliding Door Lock similar to Model No. OSSPL-SDL-111-G STD SSS of OZONE make complete with all material, labour, tools and transportation, lead ,lift and taxes if any as per the approved drawing and as per instruction of Engineer-in- Charge at site.

Supply and fixing of Terracotta Brick Jali tiles of size 220 x 220 x 63 mm (8.5 x 8.5 x 2.5 inches) for 5 Facade, as per the design finalized . the Terracotta Brick Jali in between the existing columns and MS Structure (to be provided by contractor) are to be fixed with high polymer modified thinset adhesive as per the architectural structural design including material Labour, lead ,lift transportation and all taxes